Job Description:

• Responsible for ensuring that the Electrical Integrity Inspection scope of work is executed with technical excellence, acting as a technical reference and local legal representative, focusing on the Electrical Integrity Management Process, ensuring the execution of inspections, generation of recommendations, quality assurance and quality control of subcontractors, and development and improvement of inspection plans, in order to maximize reliability, availability, maintenance, safety and integrity of assets (RAMSI), as well as contributing to the Operations procedures and achievement of results established for the business.
• Support MdB's annual corporate budget planning (expenses and investments) by participating and advising the team on corporate planning, providing information on workforce planning for Electrical Integrity Inspection and on resource needs, services and materials and other expenses used in its activities.
• Guarantee the continuous improvement of IMS by monitoring projects status and ensuring that IMS Documents under Reliability Coordination are updated and implemented.
• Reference to assist in the analysis of inspection results, traceability of information, proper root cause elaboration, and issuance of technical review/recommendation.

Education & Experience:

• Minimum 12 year experience operating with Oil and Gas industry
• Minimum 18 year experience working as Electrical Engineer
• Experience with FPSO is preferred
• Bachelor in Engineering

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

•  Maintains and support quality engineering programs, standards and improvements within the organization.
•  Development, implementation and maintaining of inspection plan and inspection tools to ensure process changes for completeness, accuracy and compliance to customer/internal quality management system requirements
•  Devises sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality and reliability data.
•  Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility.
•  Directs inspection team to engage in measuring, inspecting and/or testing products or parts and tabulating data concerning materials, product or process quality and reliability.
•  Executes the inspection / testing of new equipment capability
• Supervises inspection team on the inspection plan
•  Generates monthly metrics reports.
•  Supports Product Engineering and Program Management with customer interfaces as necessary on quality related issues.
•  Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs
•  Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures

Requirement

• Diploma / Degree in Mechanical Engineering / Electromechanical Engineering / Electronics Engineering/Manufacturing Process Technology or related discipline, preferably with at least 3-5 years’ relevant experience in manufacturing environment.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Fresh graduates will be considered for this position

· Directs and/or coordinates electronic engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
· Directs and coordinates electronic engineering activities concerned with development, procurement, installation, calibration and maintenanceof instruments, equipment and control devices required to test, telemeter and record test data.
· Determines conditions under which tests are to be conducted and sequences and phases of test operations.
· Conduct and support Validation activities on Test System/Equipment and/or process setup.
· Interfaces and confers with scientific, engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
· Analyzes and interprets test data and prepares technical reports for use by electronic or software engineering, and management personnel.
· Develops or uses computer software and hardware to conduct tests on electronic products and systems or software.
· Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as proper problem solving techniques.
· Resolves test yield problems by performing analysis of root causes, developing and coordinating corrective action measures and monitoring improvements.
· Coordinate equipment/tester maintenance and repair support as required.
· Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.
· Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirement

· Technical knowledge of PCBA and / or System box build
· Able to read and understand 2D drawings, schematics for components
· PC Literate: Word, Excel, Power Point, AutoCAD etc.
· CAD system basics
· Good technical and commercial communication skills. Excellent verbal and written communication skills.
· Ability to work in a customer oriented environment and work well with all internal functional areas, customers and suppliers.
Good team player

JD

· Prepare Materials CTB reports (Clear to Build)

· Liaise between the Material and Program Teams on demand management

· Work closely with production personnel to ensure zero downtime

· Work closely with warehouse/operations to ensure smooth flow of raw.

· Co-ordinate engineering changes with functional departments

· Report key metrics

· Liaise with customers on key materials issues

· Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.

· Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirement

· Diploma/ Degree in any discipline, preferably with 2 years’ relevant experience

· MRP / SAP knowledge preferred

· Good negotiation, communication and interpersonal skills

· Good team player who is independent and self-motivated

· Ability to interpret within established procedures and practices as well as exercise independent judgment in complex situations

1. Checking the kitchen and equipment, monitored and make sure outlet operations running efficiency
2. Make sure outlet staffs prepared food follow by policies & procedures, ensure minimise food wastage
3. Ensure staffs compliance to all safety policies & procedure
4. Monitored outlets neat & clean all the times, ensure all outlets maintaining hygiene standard
5. Plan and arrange duty roster for outlet staffs, make sure enough manpower to support operation
6. Assist in hiring new outlet staffs, handling the phone calls from candidates and process onsite interview
7. Assist in setting up new outlet or closing down outlets
8. Adhere to the company policies and procedures and comply with the Code of Conduct
9. Interact with department and team members, management, and contractors professionally and positively
10. Monitored performance of all team members, encourage good relationships, promote team spirit, and ensure effective two-way communications
11. In Coordination with HR department to arrange training sessions and refresher courses for outlet staffs
12. Provide supervision, guidance and leadership for teams to achieve sectoral goals
13. Other ad hoc duties

Job Summary:

This role requires a seasoned leader with deep expertise in business development, client relationship management and the management of post-production teams. The Director of Sales and Ops is responsible for driving the growth of the company's post production services, identifying market opportunities and building long-term partnerships with new and existing clients. The Director of Sales and Ops is also responsible for the smooth operation of the post facility, ensuring projects are delivered to the highest creative and technical standards for a wide range of major international streamers, broadcasters and producers.

Key Responsibilities:

1. Sales Strategy & Client Acquisition:

a. Develop and implement sales strategy to drive new business for the company's post-production services.

b. Identify and pursue potential clients in the TV, film, advertising and corporate sectors.

c. Manage the sales pipeline from lead generation to closing, achieving sales targets and revenue growth goals.

d. Build and maintain strong relationships with key clients, understanding their needs and delivering tailored solutions.

2. Business Development & Networking:

a. Attend industry events, conferences, and trade shows to network, build relationships, and generate leads for potential clients.

b. Negotiate client contracts, pricing structures, and service level agreements.

c. Oversee the creation of promotional materials, case studies, and content showcasing the company’s post-production capabilities.

d. Manage the company's online presence, including the website, social media platforms, and industry forums, ensuring consistent and engaging messaging.

3. Client and Stakeholder Relations:

a. Serve as the primary point of contact for new and existing clients.

b. Work closely with production and post-production teams to ensure client expectations are met and projects are delivered on time and within budget.

c. Regularly communicate with clients to gather feedback and ensure long-term satisfaction, identifying opportunities for repeat business and referrals.

4. Leadership and Management:

a. Lead, mentor, and manage a team of post-production professionals, ensuring efficient workflows and collaboration across departments.

b. Oversee scheduling, resource allocation, and daily operations.

c. Recruit, train, and retain top talent, fostering a culture of creativity, innovation, and continuous improvement.

5. Project Oversight:

a. Manage multiple post-production projects simultaneously, ensuring timelines, budgets, and deliverables are met.

b. Collaborate with directors, producers, and other key stakeholders.

c. Identify and mitigate risks in post-production timelines, adjusting strategies as necessary to guarantee on-time delivery.

6. Operational Efficiency:

a. Create and manage post-production budgets, track expenses and process payments.

b. Negotiate contracts with external vendors.

c. Maintain the smooth running of the facility.

7. Technology and Innovation:

a. Stay up-to-date with the latest post-production tools, software, and technologies, implementing new solutions as needed to improve workflows and capabilities.

b. Oversee the maintenance and upgrading of post-production infrastructure, including suites, software licenses, and storage solutions.

c. Ensure proper data management and security protocols are followed, safeguarding project assets.

Qualifications:

• Bachelor’s degree in Film, Media Production, or a related field; Master’s degree or equivalent experience preferred.
• 8+ years of experience in post-production, with a minimum of 3 years in a management or leadership role.
• Proven track record of driving revenue growth and achieving sales targets in a fast-paced, creative environment.
• Proven track record of delivering high-quality projects across a range of content formats (TV, film, digital, etc.).
• Working knowledge of post-production systems and pipelines, including editing, colour grading, audio mixing, MGFX/CGI/VFX, mastering, QC and deliverables.
• Strong leadership skills with the ability to manage cross-cultural teams and foster a collaborative environment.
• Excellent communication, presentation, and negotiation skills, with a demonstrated ability to build client relationships and close deals.
• Ability to manage multiple projects and clients simultaneously, with exceptional organizational and time-management skills.
• Knowledge of post-production budgeting, resource management, and scheduling.

Preferred Skills:

• Experience working with international teams.Strong network within the media and entertainment industries.
• Familiarity with emerging trends in virtual production, AI-driven post production tools, and cloud-based post-production workflows.
• Experience with content delivery for streaming platforms and knowledge of platform-specific technical requirements.

Compensation:

Competitive salary commensurate with experience, along with benefits including health insurance, paid time off, and opportunities for professional development.

How to Apply:

Interested candidates should submit their resume, a cover letter, and a portfolio or reel of previous work to [email protected]

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Manufacturing Engineering Technician with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Responsibilities:

1. Provide technical support to manufacturing operations, including equipment setup, troubleshooting, and maintenance to ensure smooth production processes.
2. Assist in the development and optimization of manufacturing processes, collaborating with engineers and other team members to implement improvements and innovations.
3. Conduct routine inspections and tests on manufacturing equipment and systems to ensure compliance with regulatory standards and quality requirements.
4. Participate in the validation and qualification of manufacturing processes and equipment, documenting procedures and results according to regulatory guidelines.
5. Support continuous improvement initiatives by analyzing data, identifying opportunities for efficiency gains and waste reduction, and implementing corrective actions.
6. Adhere to Good Manufacturing Practices , Standard Operating Procedures, and safety protocols to maintain a safe and compliant work environment.
7. Collaborate with cross-functional teams, including production, quality assurance, and regulatory affairs, to resolve issues and achieve production goals.
8. Provide training and guidance to production personnel on new processes, equipment, and procedures to ensure effective implementation and adherence to standards.

Qualifications:

• Associate degree or technical certification in engineering, pharmaceutical sciences, or a related field; Bachelor's degree preferred.
• Prior experience in pharmaceutical manufacturing or a regulated industry is a plus.
• Strong mechanical aptitude and hands-on experience with manufacturing equipment and instrumentation.
• Knowledge of Good manufacturing practices regulations, and industry best practices for pharmaceutical manufacturing.
• Excellent problem-solving skills and attention to detail, with the ability to analyze data and troubleshoot technical issues effectively.
• Strong communication and interpersonal skills, with the ability to collaborate effectively in a team environment.
• Ability to work independently, prioritize tasks, and adapt to changing priorities in a fast-paced environment.
• Willingness to work flexible hours, including weekends and holidays, as needed to support manufacturing operations.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Key Responsibilities:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Qualifications, Knowledge and Skills requirements:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Liaison with factories in China and Taiwan is required, knowledge of Mandarin is essential

Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Assist Producer/Director in production processes for drama, other programme genres and digital content as assigned, from pre-production to post-production.
• Manage production schedules.
• Assist in scouting, managing and contacting talents required for production.
• Conduct location checks and suggest suitable locations for filming and recording.
• Assist Producer/ Director during filming or studio recordings.
• Book and coordinate production facilities.
• Fulfill administrative production processes.

• At least A' Levels or Diploma in Media Studies
• Ability to communicate effectively with all levels of staff and public.
• Ability to work independently.
• Effectively bilingual in English and Malay for business purpose.
• Strong interest in television and media.
• Ability to manage talents and performers.

Job Description

• Ensure the camera system is set up according to the production plan which include the optical, electronic special effects and autocue system.
• Perform creative camera work and able to offer alternative angles for production needs whenever required on various operational modes (i.e Tracks, Tripods, or Handheld). Knowledge in Jibs, Underwater and Steady Camera.
• Work with stakeholders during production to ensure best visuals are captured i.e. camera position, techniques and angles of shots, and ability to problem solve on the spots to ensure output quality not compromised.
• Keep up to date with industry filming methods and equipment, receptive of innovating ways of filming.

Job Requirements

• Nitec in Electronic / Electrical Engineering or Diploma in Film Production.
• Good working knowledge of camera systems, lenses and camera support equipment.
• Preferably 3 years of related working experience.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Responsible for ensuring all aspects of the studios are in order, including studio set, equipment to ensure a smooth production of the News & Current Affairs programmes for CNA and all news bulletins transmission on Mediacorp channels.
• Assist Automation Directors on all responsibilities for the execution of daily news bulletins and current affairs programmes for both automated and traditional galleries.
• Liaise with Producers, Automation Directors and Graphic Designers to meet technical and operational requirements during live transmission and ensure that editorial intentions are met, with the highest production standards maintained.
• The incumbent will also be equipped with the right skills required for new and developing tools to deliver high quality production.

• Minimum a Nitec/ Higher Nitec in Video Production/ Diploma in Electronic/Electrical/Audio Engineering or its equivalent
• Detail-oriented and be able to multi-task.
• Effective communicator and a good team player.
• Good organizational and project management skills are necessary.
• Shift work required to accommodate the production requirements. Must be willing to work nights, on irregular shift including weekends and public holidays.

Primary Job Role and Responsibility:

1. Strategic Business Development:
   • Identify and cultivate business opportunities within the advanced manufacturing sector
   • Conduct market analysis to identify trends, skills demand and gaps in the industry
   • Implement strategic plans to drive business growth and increase training adoption.
2. Client Relationship Management
   • Build and sustain strong relationships with key stakeholders, including manufacturing companies, industrial associations, and training providers
   • Serve as the primary contact for customers’ inquiries, offering support and addressing concerns.
3. Training Programme Development
   • Collaborate with Institute of Higher Learning (IHLs) and industry training providers to develop tailored training programmes to address specific client needs.
   • Review training content to ensure that it is relevant, up-to-date, and aligned with industry standards and emerging trends
   • Monitor the performance of training programme and manage client feedback to drive continuous improvement

Requirements:

· Bachelor’s degree Business Administration, Marketing, Engineering, or a related field.

- Min 3-4 years of relevant experience

· Skills and experience in business development, marketing and customer management relevant to advanced manufacturing and industrial training sector

· Strong analytical skills with the ability to interpret market trends and data

· Excellent communication, negotiation, teamwork skills, with effective industry engagement capabilities

· Highly motivated, results-oriented and proactive

Job Description:

• Support MODEC's decision-making process by providing financial analysis, insights, and reliable information, proactively assess challenges and opportunities to ensure informed and strategic decisions are made, and Facilitate collaborations among the team, departments and entities seeking for improvement in accuracy and efficiency in Control activities.
• Handle consolidated managerial reports/presentations/analysis demand such as but not limited to:

• Monthly commercial and finance (C&F) meeting material

• Monthly MFR YTD report comments

• Monthly MdB financial report analytical comments

• Present consolidated managerial cost report and materials in internal and external meetings on demand.
• Organize and facilitate the budget exercise with Control manager.
• Handle ad-hoc needs from Management and provide information within the expected timeline by the situation.
• Maintain close relations with their direct reports to make sure the followings but not limited to:

• Provide necessary support to execute their routine and deliver materials

• Cascade down the instructions from Control Manager

• Catch issues need to be solved and escalate them to Control Manager where necessary

• Promote collaborations among the team

• Promote their development by giving regular feedback and follow-up

• Facilitate communication inside the Control department (Vessel/Corporate/BI/Bid, etc) and promote collaborations.
• Facilitate inter-department relations and encourage the collaboration to have necessary communication and information flown.
• Facilitate inter-entity relations and encourage the collaboration to have necessary communication and information flown.
• Continuously improve cost control processes and procedures to enhance the efficiency and effectiveness of the function.
• Ensure the usage of IMS by their direct reports and contribute to the governance and functionality regarding the following main aspects: define the coordination goals and projects schedule (when applicable) together with IMS team and follow up and guarantee that IMS Documents under their responsibility are updated and implemented.
• Ensure the alignment of their direct reports with Company Objectives, Policies, Procedures and integration with Clients, Community, Suppliers and MdB Executive Team, by leading and engaging them, providing technical and behavioral guidance and feedback sessions and clarifying the career path.

Qualifications & Experience:

• Bachelor's degree in Business Administration, Economics, Accounting or related areas; Bachelor in Engineering, Accounting or Business Management.
• Previous experience in the offshore industry (FPSO Operator, Drilling Companies or other companies in the Oil and Gas sector) is a strong asset
• Accounting and financial knowledge are a strong asset
• Previous management experience is a competitive edge

Responsibilities:

• Plan materials requirement according to production schedule and to ensure optimal inventory levels
• Monitor production schedule to meet delivery requirement
• Work closely with Testing team and arrange production staff to work according to schedule

Requirements:

• Diploma in Manufacturing/Production/Electronics Engineering
• Minimum 2 years of relevant work experience in electronics manufacturing industry
• Able to communicate and work closely with internal customers, buyer and sub-contractors
• Experience with ERP system
• Team player with supervisory, interpersonal and communication skills

We are looking for Production Operator who will be responsible for operating equipment and ensuring quality output. You will need to take initiatives in maintaining overall production efficiencies of assigned workstations; logging the machines when necessary and communicating to the appropriate personnel. Your responsibilities include supporting a safe work environment by following safety procedures and promptly reporting identified hazards. We encourage applicants with a positive and growth attitude to join our dynamic team!

Responsibilities and Tasks:

Operate and Maintain Equipment
- Monitor and operate assigned machines at Test or Burn.
- Demonstrate ability to use computer-based programs and applications to perform daily job duties.
- Provide full machine coverage during working hours.
- Verify that machine is logged accurately.
- Monitor equipment performance discrepancies and communicate to appropriate personnel.
- May perform basic troubleshooting of equipment in operation.

- Log down machines when necessary.
- Display an appropriate sense of urgency and prioritize machine alarms.
- Use problem-solving skills to identify, troubleshoot, and suggest resolutions to appropriate personnel.

Ensure Quality of Process and Product
- Run equipment based on current process requirements (e.g. procedures, change notifications, etc.)
- Perform required machine checks, buddy checks (when applicable), and surveillance.
- Identify deviations and apply appropriate deviation codes.
- Verify lot information in product tracking systems.
- Prevent scrap/damage by using proper handling methods for transporting product and supplies.
- Make suggestions to increase quality and efficiency of processes.

Demonstrate Initiative
- Perform assigned tasks on time and follow through with commitments without being reminded.
- Accept responsibility and be accountable for performance.
- Remain productive during process/ machine idle times - seek out tasks.

-Complete trainings on time.
- Contribute to the cleanliness of the area, compliance to 6S.

Contribute to a Safe and Compliant Work Environment
- Identify and promptly report hazards.
- Follow safety procedures and area work rules (including use of proper PPE and chemical safety if applicable).
- Use proper lifting techniques and work in an ergonomically correct manner.
- Operate and maintain equipment and tools within manufacturer and company guidelines.

Others:

- Any other job assigned by supervisor.

Minimum Requirements:

Minimum 2-3 years of working experience in a manufacturing industry, preferably in Semiconductor industry.

Minimum qualification of SPM / O-Level.

Able to work in aircon atmosphere in 12hrs permanent DAY shift or 12hrs bi-weekly rotating Day / Nigh shift.

Must possess Basic English knowledge (Read/Speak/Write).

Job Descriptions

• Provide operational support to the Section Leader in Mixing Section/ Oven & Stacking Section / Slicing Section
• Operate the mixing/ depanner & oven unloader/ slicer
• Ensure proper cleaning is done
• Adhere the disposition of all non-conforming products as instructed by superiors
• Adhere to all working and safety regulations

Requirements

• Primary education applicants are welcome to apply
• 6 days work week
• Fixed Shift (9am to 9pm / 9pm to 9am)
• Able to work overtime as and when required
• Able to work on weekends and public holidays

Job Highlights

* Provide Uniforms
* Free Meals Provided
* Free Bread Daily
* 13th Month Bonus

* Variable Bonus

* Annual Increment of basic salary (based on individual's work performance)
* Medical & Dental Benefit
* Insurance Coverage

Key responsibilities:

• Accountable for batch production, including safety, Quality and deliverables.
• Responsible for production campaign planning and execution within the timeline.
• Responsible for maintaining the GMP facilities within the validated state and ensure equipment’s maintenance, Calibration and requalification’s are being carried out within the approved frequency.
• Provide support for validation protocol review and approval.
• Provide technical support for new product introduction, facility fit assessment, FMEA and change control implementation.
• Be a technical process expert by exhibiting basic understanding of critical process/operational parameters and acceptable ranges, as well as interactions between different process parameters.
• Ensure Standard Operating Procedures (SOPs), logbooks & Batch Manufacturing Records (BMR’s) are followed effectively & competently
• Provide support for internal and external audit as a spoke person for the GMP facility and Production process.
• Support for Change control, Deviations, investigations and CAPA initiation and closure
• Ensure appropriate staffing levels and skill sets are maintained.
• Ensure team dynamics is built and maintained.
• Recognize and appreciate employee contributions and support workforce diversity.
• Ensure that employees are working in a safe and compliant manner.
• Encourage a culture of continuous improvement.
• Commitment to a fair and respectful relationship to others and behaviour in accordance with company’s Code of Conduct.
• Any other duties as assigned by the supervisor.

Cell Culture (Upstream)

• Skills and knowledge of aseptic technique for thaw and subculture stages using T flasks and Cell factories, etc.
• Knowledge of handling Cell culture, trypsinization, Centrifugation and resuspension. Cell Culture Passaging from flask / Cell factories.
• Benchtop set up for Cell culture supernatant Clarification

Purification (Downstream)

• Skills and knowledge of small-scale column chromatography techniques, tangential flow filtration techniques, Final Filling techniques in BSC and Isolators
• Knowledge in handling single use chromatography columns and tangential flow filtration skids.

Key requirements:

• Degree in a related Science/Engineering discipline
• 5 to 6 years of managerial experience for managing cell and gene therapy or similar manufacturing industry.
• Knowledge of Viral Vector manufacturing and Gene Therapy application is an added advantage.
• Knowledge of Aseptic Manufacturing process for Drug substance and Drug product is an added advantage.
• Knowledge of cGMP applications.
• Positive team-oriented attitude.
• Strong communication and interpersonal skills.

Team Leadership:

• Develop and implement production plans, schedules, and workflows to meet customer demands and minimize lead times.
• Lead and participate in continuous improvement projects aimed at enhancing quality and efficiency in Tape and Reel processes.
• Lead the team on the investigation analysis on the customer complaints.
• Supervise and mentor a team of operator and inspectors in Tape and Reel processes,
• Conduct regular performance reviews and provide training to enhance team capabilities.
• Schedule and assign tasks to ensure efficient production flow and meet daily targets.

Production Management:

• Oversee daily production operations in the Tape and Reel area, ensuring optimal output while maintaining quality standards.
• Monitor production processes, ensuring adherence to established procedures and quality standards.
• Troubleshoot and resolve production issues promptly to minimize downtime and maintain workflow.
• Manage production resources, including labor, materials, and equipment, to optimize performance and minimize downtime.
• Coordinate with vendor and monitor inventory to ensure availability of materials.
• Establish and monitor key performance indicators (KPIs) for production efficiency, quality, and safety.
• Support on area.
• Other tasks related to operations assigned based on business needs.

Quality Assurance:

• Ensure all products meet specifications and quality standards through regular inspections and testing.
• Implement corrective actions for any non-conformance and promote continuous improvement initiatives.

Process Optimization:

• Identify opportunities to improve production efficiency, reduce waste, and enhance product quality.

Manufacturing Process:

• Operate Tape and reel machine according to the required output.
• Follow standard operating procedures (SOPs) and ensure all documentation is completed accurately.
• Prepare material to be used for tape and reel process.
• Coordinate machine buy off to technician and QA.
• Load raw materials into machines and ensure the consistent supply of materials throughout the production cycle.
• Update batching list / production records.
• Document production data such as quantity, quality, and downtime reports.
• Feedback any rejection / issues encountered during tape and reel process.
• Identify and report any malfunctions or operational issues to the production supervisor.
• Operate vacuum sealing machine according to the required output.
• Prepare packing materials to be used for tape and reel process.
• Update production records
• Identify and report any malfunctions or operational issues to the production supervisor.
• Other tasks related to operations assigned based on business needs.

Quality Assurance:

• Follow standard operating procedures (SOPs) and ensure all documentation is completed accurately.
• Perform incoming and outgoing inspection of finished goods.
• Feedback any rejection / nonconformities encountered during inspection.
• Perform machine buy off prior production run.
• Perform buy off activity for new package.
• Updating / keeping records of any discrepancies found
• Daily updating of inspection result.

Role and Responsibility :-

• To provide quality day-to-day L2 Production support for Java/Web-based application.
• To coordinate and support infrastructure maintenance activities.
• To manage implementations of new application releases, adhering to the best practices of the release management process.
• To work with various partners such as Peer Application Teams, Infrastructure, Vendors, Security and Change teams, to provide seamless support for the business.
• To manage Production issues by responding in a timely manner in accordance to the Service Level Agreement with the Business.
• To enhance existing support process to maintain/improve service level & quality.
• At least 2 years working in an L2 Application Support Environment

Core technical competency required :-

• Linux; Unix Shell Scripting
• SQL (MYSQL/MSSQL)
• Java/Web-based
• OpenShift/Docker

Good to have experiences :-

• AngularJS
• ActiveMQ
• Elastic Search
• Application Monitoring Tools
• CI/CD (Continuous Integration & Continuous Deployment)
• Python
• Microservices concept

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Job Scope :

1. Day-to-day warehouse operations.
2. Stock Count and verification of packing list.
3. Responsible for handling and organising incoming and outgoing shipments.
4. Packing and Label.
5. Loading/unloading of container.
6. Unload and unpack goods and items from delivery trucks or other transport vehicles.
7. Receive and process incoming goods such as stock and raw materials.
8. Ensure goods received in order and in good condition.
9. Any Ad hoc duties assigned.

Working Hours: 8am to 5.18pm (Mon to Fri)

Requirement:

- Know simple English.

- Preferably with class 3 and forklift licence.

- Able to carry heavy item.

- Having good physical stamina is required to perform duties safely and efficiently.

Job Types: Full-time

Training will be provided

Gross Salary: S$1400

Salary up to S$2000