• Configure semiconductor backend equipment.
• Align equipment/modules and perform vision alignment and calibration.
• Conduct machine checkout procedures.
• Provide technical support on-site, both domestically and internationally.

Requirements:

• Nitec in Engineering or equivalent.
• At least 1 year of relevant working experience
• Proficient in machinery automation, including electrical, servo, sensor, and pneumatic systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Location: Tuas West (P/U from Jurong East MRT & Choa Chu Kang MRT at 7am)

Working hours: 8:00am to 5:15pm (Mon to Fri)

Salary Range: $3,700-$4,800

Responsibilities

• Review of enquiries and contract tenders.
• Ensuring that relevant sections are distributed internally to the appropriate departments.
• Attending meetings with tender pursuit team and identify responsibilities, required inputs and key dates.
• Review of all information relating to bid, clarification of responses received from internal support departments and insertion of qualifications into bid document as appropriate.
• Gathering support information from internal drives for insertion into bid document.
• Preparation and compilation of quotes and proposals in accordance with ITT guidelines.
• Other ad hoc duties assigned

Requirements

• Diploma/ Degree in Mechanical / Manufacturing Engineering with minimum 3-4 years of experience from manufacturing industry
• Knowledge of Microsoft Office

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

Job Responsibilities

• Lead the development, standardization, benchmarking and continuous improvement of operation/equipment metrics, business processes and BKMs for the FE ME network.
• Govern the ground rules for FE ME operation and Fab fields.
• Proactively uncover opportunities for improvement by deep-diving into the root cause of WS or Equipment MA/Lost/Standby nonperformance, partner with Site/MAE/CPEE teams drive recovery and improvement.
• Anticipate potential obstacles in constraint workstation management and develop strategies with the site ME Managers to improve WPD.
• Partner with network SIC, Equipment and Process team to improve and support BIC (Best In Class) Gb Output, Constraint Workstation utilization, as well as NPI (New Product Introduction) Cycle Time and Inventory Management.
• Be an Area technical global SME to optimize area operations, systems integration and to drive global standardization across all sites.
• Govern MAS change process with WW alignment and implementation of scheduling enhancements and drive continuous improvement in scheduling solutions.
• Identify challenges in operations and conduct Powerwalk to discover opportunities for improving efficiency through digital transformation.
• Lead proof-of-concepts and facilitate deployment of BKM reports and automation to improve fab/area efficiency and productivity.
• Participate in the WW ME forums, facilitate area network meetings and sustain/audit existing BKMs and business processes in the network.
• Cultivate an environment of motivation to encourage engagement from distributed team members, enabling them to reach their fullest potential.

Requirements

• Bachelors/Masters Degree in Engineering or related field of study or equivalent experience
• Intermediate knowledge of the 300mm semiconductor manufacturing process is preferred.
• Confirmed experience in Manufacturing Engineering.
• Proficient in the fundamental principles of Lean Manufacturing, Equipment Efficiency, and Line Management.
• Thorough knowledge of Micron’s MES, Scheduling System, Line Management systems and related production and planning reporting tools.
• Knowledge in SQL, Tableau, Python capability to enable automation will be an advantage.
• Lean Six Sigma Certified or Lean Manufacturing Certified will be an advantage.
• Show initiative and determination to identify the right collaborators and overcome obstacles to achieve objectives for various projects.
• Show success in applying their knowledge of area processes and equipment to solve problems and implement comprehensive solutions for all Micron sites.
• Proven track record of effective global collaboration, demonstrate good cultural awareness and agility to effectively drive alignment and use digital tools to establish rapport remotely across various countries.

Responsibilities:

• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety/quality, reduce energy consumption, improve production capacity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Coordinate, arrange and plan new grade trial run with R&D and Operation team, and handle the trial run and the evaluation.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk.
• Troubleshoot process issues, perform root cause analysis and propose corrective and preventive measures.
• Participate actively in HAZOP , FMEA and Control plan studies as Process engineering function for safety and quality improvement.
• Oversee Process related capital expenditures project from conceptual design up to Front End Engineering Design (FEED).
• Study and implement Industry 4.0 related technologies as part of Productivity Improvements and Process improvement Projects
• Participate in Company EHSQ program and cooperate with its promotion and improvement.
• Collaborates with other departments in Management systems such as ISO9001, ISO14001, ISO45001, SS651, IATF16949, Safety Case regime, Energy management system and ISCC.

Requirements:

• Bachelor / Master’s Degree in Chemical Engineering is a MUST.
• 2-3 year(s) of working experience in Petrochemical Industries (Preferred) / manufacturing industries with Engineer capacity scopes.
• Knowledge in IATF 16949/ IEC 61511, ISO9001, ISO14001, ISO45001 and SS651 Standards.
• Using Process Simulation software such as Aspen Plus®/ Aspen HYSYS®.
• Familiarity with Distributed Control System (DCS), in particular its logic and sequence modification.
• Familiarity with Safety Case Regime.
• Able to multi-task and handle a wide spectrum of responsibilities.
• Good interpersonal skills and strong analytical skills.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

This position requires the individual to performs electro-mechanical assembly operations, troubleshooting, repair & maintenance and testing of pneumatic systems/machine.

Duration: 12 months contract

Location: Upper Changi

Day Shift – 7.00am - 4.30pm

Noon Shift – 430pm to 130am ($25 Per Shift and one way transport home)

Job Duties:

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

Interested candidates may apply through the application system. We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. Reg No: R23117785 (Lok Ding Hann)

• Well Established Company
• Salary $2000 - $2500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Aljunied
• Working days: Monday to Friday
• Working hours: 8:30am – 6pm

Job Responsibilities:

• Operate CNC and conventional milling machines and grinding machines
• Programme CNC milling machines based on 2D drawings, 3D models and specifications
• Set up CNC and conventional milling machines by installing fixtures, tooling, and workpieces according to job requirements
• Maintain operationality, safety and tidiness of shop floor independently
• Any other ad-hoc duties as assigned

Requirements:

• Possess minimum GCE O Level with at least 1-2 years of experience in operating CNC Milling / Lathe Machines / Grinding / Drilling machines

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Basic Salary UP$4200 + Transport Allowance

• Company located at Tuas

• 5 Days work week: Monday – Friday: 8am – 5pm

• Well Established Manufacturing Company

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Understand the full requirements of all manufacturing and improvement project.
• Familiar with various laser systems as well as advance welding / cladding technique.
• Experience in robot programming for welding / laser cladding.
• Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production team to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Requirement

• Diploma / Degree in Mechanical / Manufacturing Engineering or equivalent
• 1 - 3 years of relevant experience in metal machining or oil & gas industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Salary : SGD3,500 - SGD 4,000
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Job Responsibilities

• Update and maintain the company website to ensure accurate and engaging content
• Develop, create, and track social media content to enhance brand visibility and engagement
• Developing Marketing Materials such as brochures, posters, video and website content
• Support the planning, organization, and execution of events/exhibition in alignment with approved Marketing plans
• Maintain and track inventory for Marketing and promotional Materials such as brochures, namecards and corporate gifts
• Keep organized records of contacts related to exhibitions and events
• Liaise with vendors to produce artwork, promotional materials, and supplies
• Managing website content to fully utilize the website platform to market (create, update, and upload information)

Job Requirements

• Proven experience in a marketing role, preferably within the Semiconductor industry
• Diploma or relevant cert in relevant field

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Essential Duties and Responsibilities:

Include the following. Other duties may be assigned.

• Responsible for the safe operations of equipment to manufacture products. Perform checks and ensure safety features (machine guarding, interlocks, etc) is in place and under any circumstances should not bypass.
• Maintain 6S in working area. Follow standard
• Report immediately to direct supervisor if any safety features (machine guarding, interlocks, etc) are not functional or present some alteration.
• Comply with the management regulation of company and department, obey the job assignment.
• Operation must be conducted according to WI strictly，and familiar with their related responsibility
• Deal with other assignments assigned by superior.

Job Overview

The primary functions of an operations department include the design and management of products, services and processes. To prepare shippable items by proper packaging, sealing, labeling, and preparing the item for transportation. On the job training will be provided.

Reporting Officers: (Packing) Section Head & Production Planner

Job Responsibilities:

● To pack & label pastry/savory/bakery products ensuring that the required quantity is met according to schedule & product specifications

● To maintain consistent quality in the packing & labelling of products

● To ensure proper storage & handling of products

● To pick & dispatch products according to customers' orders

● To execute all duties tasked by Reporting Officers in the department

● To observe and adhere to highest safety, sanitary & hygiene standards in the production area

● To comply with ISO 22000, AVA and other local food authorities, including MUIS/Halal, requirements

● To perform or assist with administrative activities such as those related to production planning & ISO 22000/SAP production documentation

● To ensure proper and safe use of all equipment and work areas

● To closely work with the team and the department

Job Requirements:

● Exposure in the packing, labelling &/or dispatching of western pastry/savoury/bakery products & on a large scale

● Familiarisation with ISO 22000 Food Quality Control System

● Knowledge in running the relevant equipment, as necessary

• Training will be provided. No working experiences individual are welcome to apply.

Job Description

· Oversees the daily operation and food preparations process that

highest professional food quality & safety standards set by the Manager were achieved

. Managing a team of production workers, ensuring compliance with safety and quality standards,

and optimizing production efficiency

· Perform any other ad hoc duties as assigned by the Manager

· Your assigned duties may be adjusted depending on prevailing evolving needs of the company.

· Other Adhoc duties as assigned.

Job Requirements

· Minimum 5 year FnB Food manufactuting experience.

· Effective communication and leadership skills are essential

Job

- Manage all facilities to ensure availability of essential mechanical electrical and other essential services at all times to production.

- Manage departmental financial budgeting, forecasting and ongoing expenditures

- Lead the team to plan, operate, maintain and ensure 24/7 operational readiness of essential Mechanical and Electrical (M&E), Chemical System and building services; such as chillers, power, cooling systems, Scrubbers system, DI system, Waste Water Treatment, Gas system, plumbing and sanitation, pest control, landscape and etc.

- Plan and oversee upgrading/improvement works to facilities in supporting production and offices. Oversee contract management including calling for and awarding of tenders for M&E, Chemical and building maintenance, minor works, production equipment hook-up and upgrading works.

- Ensure department operations comply with applicable outside agency rules and regulations.

- Oversee energy audit, conservation, management and implement green initiatives in driving ISO14k.

- Oversee implementation of responds plans to deal with emergency situations resulting from equipment failure, power shutdown and etc.

- Provide leadership to department, ensuring high morale, team work and ownership

- Strategic review for Facilities services to continuously add value to the processes

- Lead department to continuously improve Facilities Operational Procedures and Performance. Drive reliability and robustness of systems.

- Lead and implement facilities risk management processes to identify major risks pertaining to plant operation and activities.

- Drive and support programs such as BCP, Training, 5S, Gemba walk.

- Quality management control on all clean room environmental parameters.

- Lead the team to investigate and develop CAPA for any facilities related incident.

Requirement :

• Degree in Engineering discipline (preferably with a Degree in Mechanical or Electrical Engineering).

• Minimum 7 years in managerial position (3 years in Snr Management role).

• Excellent project management, leadership and communication skills.

• Preferable with Semiconductor, Wafer fabrication Facilities experiences.

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed MS Word format to [email protected] stating

Expecting Salary

Date Available

Reason to Leave each job:

We regret that only shortlisted candidates will be notified

Joyce Koh Ai Leng

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

Tel: 6950 9737

www.peopleprofilers.com

EA License Number: 02C4944

EA Personnel Reg nos R1110618

Job ID: L3V49RYW

Job:

 Handle group monthly consolidation preparation and reporting.

 Perform account reconciliation, ensure proper intercompany transactions and eliminations.

 Review inter-company activity and balances and prepare group audit schedule and other group reports.

 Prepare monthly and quarterly reporting pack, annual audit and ensure timely filling of statutory financial statements and group reporting.

 Submission of ad hoc group information in support of HQ business decision making.

 Assist in preparation and analysis of financial data to support group reporting.

 Ensure accounting reports are in compliance with accounting standards.

 Highlights exceptions and provide feedback to management on key findings.

 Assist in process improvement, procedure and policy review and system implementation.

 Support Treasury for group cash management.

 Support Tax on providing financial related information and schedules.

 Any other ad hoc assignments as designated by manager.

Requirement :

 Degree in Accounting, Finance or equivalent.

 Experience in group consolidation, financial analysis and system implementation are preferred.

 Good planning and organizational skills.

 Good communication and interpersonal skills in dealing with multiple stakeholders of diverse nationalities.

 Flexible and able to work independently and perform under pressure.

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed MS Word format to [email protected] stating

Expecting Salary

Date Available

Reason to Leave each job:

We regret that only shortlisted candidates will be notified

Joyce Koh Ai Leng

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

Tel: 6950 9737

www.peopleprofilers.com

EA License Number: 02C4944

EA Personnel Reg nos R1110618

Job ID: L6Y94X4R

Job Descriptions

• Provide operational support to the Section Leader in Mixing Section/ Oven & Stacking Section / Slicing Section
• Operate the mixing/ depanner & oven unloader/ slicer
• Ensure proper cleaning is done
• Adhere the disposition of all non-conforming products as instructed by superiors
• Adhere to all working and safety regulations

Requirements

• 1 year contract
• Primary education applicants are welcome to apply
• 6 days work week
• Fixed Shift (9am to 9pm / 9pm to 9am)
• Able to work overtime as and when required
• Able to work on weekends and public holidays

Job Highlights

* Provide Uniforms
* Free Meals Provided
* Free Bread Daily
* 13th Month Bonus

* Variable Bonus

* Annual Increment of basic salary (based on individual's work performance)
* Medical & Dental Benefit
* Insurance Coverage

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Working Days: Monday – Friday
• Working Hours: 08:00am - 05 :00pm
• Location: Taman Jurong
• Salary: $2,800 - $3,000 + $90 Transport Allowance

Responsibilities:

• Process monthly payroll and overtime payments.
• Handle employee work pass applications and cancellations
• Manage the onboarding and offboarding process
• Assist with recruitment activities such as posting job openings, screening resumes, and scheduling interviews.
• Ensure timely tax clearance for employees.
• Manage insurance claims for employees, including medical and accident claims.
• Perform other HR-related tasks or projects as required.
• Issue uniforms to new employees during onboarding and manage uniform inventory.
• Perform general office administrative duties such as filing, organizing, and managing office supplies and stock.

Requirement:

• Minimum Diploma in Human Resource or a related field
• At least 1 year of relevant experience

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Work Location: Yishun Industrial Park A, Singapore [ Canberra MRT] / Have company transport
$6000 to $8000 depends on experience
Working Days: 5 Days // 8am/8.30am - 5.30pm/6pm

Role:
As a Senior/Staff Software Engineer, you will be required to develop solutions for SPI, factory line and their associated modules and configurable options. You will also be responsible for solving complex engineering problems using new or existing technologies, and through innovation, creativity, and technical analysis with a strong focus on quality.

Requirements:

• Master’s or bachelor’s Degree in engineering or related discipline
• Min 5 years of relevant working experience
• Experience in analysis of software design and implementation for hardware systems
• Experience in the design and validation of engineering requirements
• Experience in Source Control Systems, Visual Studio and Software Development Lifecycle
• Proficient in C++ programming language, UML and appropriate usage of design patterns
• Proficient knowledge of appropriate equipment software and experience in Unit Testing and Dependency Injection
• Experience in WPF, GIT, hardware and real time control systems will be advantageous

Responsibilities:

• Lead technological solutions to maintain and extend an advantage in a competitive market
• Handle complex software design tasks to predetermined schedules with a strong focus on quality
• Maintain focus on quality when challenged with urgent customer requests/bugs
• Maintain a balance between functional design and time to market, ensuring maintainability and scalability
• Responsible for the selection and implementation of design concepts to translate to productionised products
• Provide evidence of appropriate solution for customers via technical reviews
• Undertake continual professional development including both personal and technical competencies
• Guide and support the junior team members on their professional development
• Perform any other ad-hoc duties as assigned

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Work Location: Yishun Industrial Park A, Singapore [ Canberra MRT] / Have company transport
Salary: $4500 to $6500 depends on experience
Working Days: 5 Days // 8am/8.30am - 5.30pm/6pm

Role:
As a Software Engineer, you will be required to maintain and manage applications of current and developing technology, and undertake engineering design, development, and operation of SPI solutions, factory line solutions, and their associated modules and configurable options with a strong focus on quality.

Requirements

• Bachelor’s degree in engineering or related discipline
• Min 3 years of relevant working experience
• Experience in the design and validation of engineering requirements
• Experience in Source Control Systems, Software Development Lifecycle, Object-Orientated Programming and UML
• Proficient in C++ programming language, UML and appropriate usage of design patterns
• Proficient knowledge in at least one core area of equipment software
• Experience in hardware and real time control systems, design patterns, Visual Studio, C++, GIT, Unit Testing, Dependency Injection and/or WPF will be advantageous

Job scope

• Provide correct solution for current production units and those of the same class present in the field
• Maintain focus on quality when challenged with urgent customer requests/bugs
• Maintain a balance between functional design and time to market, ensuring maintainability and scalability
• Responsible for the selection and implementation of design concepts to translate to productionised products
• Provide evidence of appropriate solution for customers via technical reviews
• Undertake continual professional development including both personal and technical competencies
• Perform any other ad-hoc duties as assigned

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

$11.50/HR + LEAVES + MEDICAL+BONUS

• Provide day to day production operational duties.
• Processing of finished products.
• Picking and packing of products.
• MUST BE OK to handle poultry meat.
• 10 to 15 DEG work environment.
• ABLE TO Commit.

Maintaining knowledge and ensuring compliance wit departmental policies and standard service procedures.

Supervising efficient upkeep of tools through proper usage of equipment and devices.

Analyzing all guest requirements and preparing plans to resolve customer care related issues and satisfy guests.

Monitoring employee morale and conducting annual appraisals.

Overseeing collection and submissions of payroll related items and leave forms to the Human Resources.

Supervising efficient upkeep of tools through proper usage of equipment and devices.

Overall Objectives

Responsible for the smooth day-to-day operations of the production department

Core Responsibilities

1. Ensure work order schedule is strictly adhered to for smooth operations
2. Technical training of new technicians, and the upskilling of existing technicians
3. Hosting daily toolbox meetings
4. Operation of machine (if necessary)
5. Oversee general upkeep, cleanliness, safety and maintenance of production workshop and equipment
6. Liaison between shopfloor and office, and with external vendors relating to equipment maintenance and repair
7. Administrative duties such as approval of completed production work order documents and programs, and recording of details of both in-house and external maintenance work

Key Deliverables

1. Continuous development and improvement of the production department by developing operator skills and manufacturing processes
2. Increasing efficiency in the daily operations of the production department

JOB DESCRIPTION

1. General

Planner is responsible for Sales order acknowledgement, issue Purchase Order, schedule production plan according to demand and invoice for shipment. Develop production plan according to available capacity and scheduling of work orders per customers requirement (Assemble to order). Analyzes supply and demand at the family and master schedule level to determine out of balance conditions and recommended alternatives to superior. . Experience in warehousing management and operations is necessary

2. Resposiblilities

· Responsible for creating and maintaining master schedule for material and capacity planning balancing the supply and demand for a product family.

· Create Purchase Order and acknowledge Sales Order from Supply Units.

· Coordinate with Suppliers, Supply Unit, production and logistics to ensure delivery schedule are met.

· Expedite material from Suppliers and follow up with them on discrepancies claim.

· Review Order Point, Safety Stock and Demand and maintain components at optimize level to minimize slow, non-movers obsolescence.

· Participate in key performance indicator on Safety, Quality, Delivery and Cost.

· Support ISO 9001 quality and ISO 14001 environment management system

· Drive warehouse improvements with data base analysis and best practice recommendations.

JOB SPECIFICATION

Requirement

• Diploma/Degree in Purchase and Material Management or Business Administration
• At least 2-3 years of Materials Management/Supply Chain experience
• Experience in SAP/MRP application advantageous
• Proficient in Microsoft Excel / PowerPoint / Word /Access.
• Hands on person and used to work in a smaller organization
• Good communication skills and relationship with all level of staff , with positive attitude
• Additional experience in 3PL logistic and purchasing /vendor management preferred

Responsibilities:

Sales Administration / Support

• Process customer purchase orders by completing Customer Order Processing (COP) forms and ensuring stock reservations are made.
• Prepare and submit purchase requisitions for equipment, spare parts, and accessories needed for projects and ad-hoc orders, seeking approval as necessary.
• Communicate with customers, manufacturers, vendors, and suppliers via email or phone to track shipment statuses.
• Take responsibility for following up on the receivables and deliverables of ordered goods, and identify ordered equipment to prepare material take-off schedules.
• Coordinate with the Warehouse and Logistics Departments to ensure timely packing and delivery of goods to customers.
• Respond to customer inquiries (via phone or email) regarding pricing, stock availability, or complaints (such as invoice disputes), and ensure proper follow-up actions are taken.
• Assist Sales Manager(s) / Assistant Sales Manager(s) in preparing proposals and quotations for customers.
• Support Sales Manager(s) / Assistant Sales Manager(s) in gathering different variations for projects to facilitate price negotiations with customers.
• Ensure proper organization and filing of documents.
• Perform other ad-hoc tasks as assigned by the Head of Sales / Sales Manager(s) / Assistant Sales Manager(s).

Marketing Communication

• Assist Sales Manager(s) / Assistant Sales Manager(s) in organizing and coordinating events, such as trade exhibitions, road shows, and product seminars.
• Help Sales Manager(s) / Assistant Sales Manager(s) plan and organize internal events, such as dealer meetings.
• Prepare and organize marketing materials and collateral.
• Oversee the maintenance and updating of the company’s website content to ensure it is current.
• Support Sales Manager(s) / Assistant Sales Manager(s) in coordinating with partners of trade magazines and media agencies.
  

Requirements:

• With 5 years of Customer Support or Sales Support experience.
• Exceptional customer service and presentation skills.
• Positive, dynamic and results-oriented

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R23117856

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Perform routine manufacturing processes and equipment preparation (CIP, PT, SIP, etc.)
• Support day to day production activities and record data according to Electronic Batch Record (EBR) in compliance with GMP, Environmental, Health and Safety guidelines.
• Perform equipment and process monitoring
• Able to communicate with Supervisor/supporting functions for any safety, quality, and process irregularities
• Troubleshoot and resolve process related issues.
• Able to perform production area housekeeping (5S, Kanban, etc.)
• Review documentation of activities as per GDP (Good Documentation Practice)
• Use sophisticated softwares / programs (LIMS, SAP, DCS, MES, etc.) to collect and evaluate data
• Responsible for maintaining and meeting training requirements.
• Any other task as assigned by Supervisor/Manager

Requirements:

• Degree/Diploma/ITE in chemical engineering, pharmaceutical or biotechnology equivalent
• Minimum 1-year relevant biotechnologist experience, experienced in GMP and/or Upstream. Fresh graduates are welcome to apply.
• Basic skills and knowledge in Fermentation Cell culture, Bioreactor processing, Media and Buffer Preparation and downstream processing is an added advantage.
• Able to do rotating 12-hour shift work
• Team player that possesses troubleshooting and analytical skills
• Must be able to carry heavy load of up to 10kgs

1 year contract. Option to extend/annual renewal depending on performance

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Sales Coordinator to be part of their Sales Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Sales Coordinator:

• Accurately process sales orders in the system, ensuring correct product details, pricing, and customer information.
• Prepare and maintain sales documents, including quotations, invoices, contracts, and sales reports.
• Assist the sales team in preparing presentations, proposals, and any other necessary documents.

Requirements:

• Relevant experience
• Experience with SAP or ERP System

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De