• Work closely with the signal team to ensure compliance with the WSH Act and its subsidiary legislations, including the provisions of the WSH (Construction) Regulations and WSH (Operation of Cranes) Regulations in daily lifting operations.
• Able to work from height to ascertain whether the ground conditions are safe for any lifting operations and report this to the lifting supervisor.
• Perform pre-work inspection on the crane as required by the manufacturer’s handbook to ensure that it is safe for operation and report any malfunction of the crane.
• Be prepared to stop work or to notify the WSHE Department in the event of any WSHE deviations
• Able to operate the crane in a safe manner under clear signal from a signalman
• Adherence to safety practices in the workplace
• Qualified crane operator with BCA and MOM recognized
• Undertake any other assignment related to his scope of work assigned by the HOD and/or Management whenever deemed necessary.

Value Add of Position

• Knowledge of WSHE legal guidelines to advise and rectify site activities

* Responsible to analyze, review and approve customer ECO (Engineering Change Orders) and Implement ECO for

Engineering related.

* Responsible to develop and maintain (review and approve) Bill of Material, Work Instructions and Validation / Verification

protocol & report etc.

* Responsible to provide training to production personnel on Work Instructions.

* Attend Line quality issues and trouble shoot Engineering related issues.

* Responsible to review and approve Incident Reports, if any.

* Maintain Consigned/In-house Tooling, Jig and Fixtures and conduct PM (Preventive Maintenance) and repair support as

required.

* Coordinate with FA engineer and perform First Article qualification of parts.

* Participate in periodic Validation/Calibration activities to ensure smooth running of production line.

* Participate in LEAN activities pertaining to Cycle Time, Process, Safety and Yield improvements for Line balancing.

* Responsible for Line set-up and providing the design and method of handling, labeling and storage of KTE box and Milk-Run

Trolley.

* Other tasks as and when required and directed by Engineer.

* Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering

to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and

targets through participation of EHS programs

* Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

* Technical knowledge of Test Trouble-shooting and / or System box build Assembly

* PC Literate: Word, Excel, PowerPoint etc.

* Good technical and commercial communication skills. Excellent verbal and written communication skills.

* Good team player

• Formulating strategies and policies to reach the organization's objectives
• Responsible for Material Planning requirements and forecasting
• Responsible for Warehouse Inventory forecasting
• Responsible for inventory control accuracy, stock replenishment, capacity planning, timely processing of all inbound and outbound activities
• Maintain reliable and accurate stock records in the system
• Manage warehouse operations while supervising a team of warehouse personnel
• Daily planning and control of inventories and warehouse space
• Identify and investigate inventory discrepancies and recommend for improvement
• Conduct analysis of errors made in warehouse operations and identify root causes
• Manage warehouse inventory reports/other warehouse reports
• Demonstrate full understanding of safe work practices and procedures
• Candidate must be able to withstand temperatures as low as -18 degrees Celsius when going in and out of the warehouse to resolve issues when required

Work Location: 5 Senoko Road

5.5 days workweek (pls specify your preferred shift(s) in your resume)

Work Timing: Monday to Fri 8am to 5pm, Sat 8am to 12pm

OR

Work Timing: Mon to Sun, 5 days workweek 9pm to 7 am

(1 Rest Day and 1 Off Day on any day of week based on roster assigned)

As one of the largest cold room storage facilities still undergoing testing, this role may require you to work overtime as needed until stability is achieved between the system and the warehouse.

Overview: -

• Monthly Salary: Up to $3500 + AWB + Bonus (depend on EXP)
• Location: Loyang, Pasir Ris
• 5 Days (Monday to Friday), Office Hours

Your Responsibilities: -

• Develop, document, and support the creation of high-precision plastic injection molds and components for manufacturing.
• Assist the Program team during the initial project quotation phase by providing accurate tooling and product DFM (Design for Manufacturability) that aligns with quality standards.
• Engage with customers for DFM and mold concept reviews to ensure their technical requirements and concerns are properly addressed.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.

You will need: -

• Previous experience or knowledge in Precision Tooling Design/Fabrication, Micro Plastic Injection Molding, or Manufacturing Process Engineering is preferred.
• Proficiency in 3D CAD software, specifically Siemens UG NX or PTC Creo 4.0 and above.

For interested applicants, kindly click "Apply Now"

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Production Engineer / Executive | Up to $4k | 5 Days | Jurong

Location: Tanjong Penjuru
Working hours: Mon to Fri from 7:30am to 5pm
Salary: $3,500 - $4,000

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

Experience in setting up automated systems.

Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Our client specializes in high-precision CNC machining and custom manufacturing. Due to business needs, they are now recruiting a Welding Process Engineer to be part of their Welding Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Welding Process Engineer:

• Design and create welding procedures, specifications, and jig fixtures.
• Perform TIG welding and have knowledge of orbital welding (preferred).
• Introduce and implement advanced welding technologies and techniques.
• Estimate costs, resources, and timelines for welding projects.
• Train welding personnel on techniques and safety protocols.
• Maintain comprehensive records of welding procedures, inspections, and certifications.
• Develop and uphold Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).

Requirements:

• Diploma in Mechanical Engineer
• Possess Certified Welder Inspector (CWI) is an added advantage
• 3 years of relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a global MNC, one of the most established pioneers in the Chemical industry. Due to business needs, they are now recruiting a Planning Officer to be part of their Logistics Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Planning Officer:

• Support the department in planning daily delivery schedules, buying plans, and managing monthly inventory control.
• Address and resolve delivery issues in collaboration with relevant teams.
• Perform administrative tasks, including raising purchase requisitions for inventory items.
• Coordinate and arrange mandatory training courses for workers.
• Maintain accurate records, including ISO documentation, for the department.
• Manage internal and external communications related to logistics.

Requirements:

• Diploma in related field
• Relevant experience in Delivery Planning

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a leading player in Manufacturing industry. Due to business needs, they are now recruiting a Quantity Surveyor to be part of their Engineering Team for ongoing transformation projects. They are located in the North - easily accessible.

Duties of Quantity Surveyor :

• Cost Evaluation: Conduct technical evaluations, prepare Bills of Quantity (BOQ), and perform cost analysis for projects.
• Supplier & Subcontractor Management: Obtain and compare quotations from suppliers and subcontractors according to project requirements.
• Drawing Review: Review architectural and electrical drawings; prepare and revise designs using AutoCAD and Revit.
• Electrical Load Calculation: Calculate maximum electrical demand, including lighting, power consumption, and energy requirements.
• Design & Drafting: Design and draft electrical service layouts such as lighting, power, cableways, and create related diagrams.
• As-Built Drawings: Prepare and update As-Built drawings for completed projects.
• Site Coordination: Coordinate site visits with subcontractors and the operations team.
• Quality Control: Ensure quality control of electrical installations according to design drawings on-site.

Requirements:

• Diploma or Degree in Electrical Engineering
• Relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a leading player in Manufacturing industry. Due to business needs, they are now recruiting a Digital Marketing Specialist to be part of their Marketing Team for ongoing transformation projects. They are located in the North - easily accessible.

Duties of Digital Marketing Specialist:

• Digital Strategy: Develop and implement digital marketing plans to enhance online presence, boost traffic, and generate leads.
• Website Management: Design, develop, and maintain the website to ensure user-friendliness and optimization for lead conversions.
• Content & SEO: Oversee content creation (blogs, videos, social media) and implement SEO strategies for higher visibility.
• Social Media & Ads: Manage social media platforms and execute paid advertising campaigns to increase engagement and ROI.
• Email Marketing: Create and manage targeted email campaigns to nurture leads and maintain customer relationships.
• Analytics & Reporting: Track performance using tools like Google Analytics and adjust strategies based on insights.
• Partnerships & Engagement: Build partnerships with industry influencers and engage with the online community to foster customer relationships.
• Innovation: Stay updated on digital marketing trends and apply new techniques for continuous improvement.

Requirements:

• Diploma in Marketing
• Relevant Digital Marketing experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Manufacturing MNC. Due to their current expansion plan, they are looking for a Engineering Assistant to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Assist Engineers and Managers with assigned tasks.
• Collaborate with Engineers and Operators to support product design, testing, and process improvements.
• Conduct equipment inspections and coordinate maintenance.
• Manage inventory discrepancies and handle material orders.
• Ensure products and processes comply with quality assurance standards.
• Calibrate and troubleshoot equipment as needed.
• Any other duties as assigned.

Requirements

• Minimum Diploma in Engineering related studies or equivalent
• Minimum 1 year relevant experience
• Proficient in Microsoft Office application

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Sales Coordinator to be part of their Sales Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Sales Coordinator:

• Accurately process sales orders in the system, ensuring correct product details, pricing, and customer information.
• Prepare and maintain sales documents, including quotations, invoices, contracts, and sales reports.
• Assist the sales team in preparing presentations, proposals, and any other necessary documents.

Requirements:

• Relevant experience
• Experience with SAP or ERP System

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a QC Inspector to join their QC team. They are located in the West - easily accessible.

Responsibilities of QC Inspector:

• Carry out dimensional inspections based on the order or technical drawings, using various precision instruments like bore and depth gauges, vernier calipers, dial indicators, surface testers, micrometers (for both internal and external measurements), and ultrasonic gauges.
• Interpret the dimensional and geometric specifications from the technical drawings and select the suitable measurement tools accordingly.
• Conduct both incoming and outgoing inspections, focusing on dimensional, length, visual assessments, and Brinell hardness tests. This includes:Preparing materials for hardness testing.
  Performing Rockwell hardness tests and marking as necessary.
• Maintain material traceability throughout the process to ensure proper documentation and accountability.
• Ensure jobs are completed according to order specifications and report any deviations to the QC Team Lead or Quality Manager. Be capable of creating sketches to represent defects when required.

Requirements:

• Min ITE or equivalent
• No experience needed

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

• Responsible for materials planning based on production demand.
• Monitor material shortages and ensure material availability to support production plan.
• Plan production schedule to meet delivery requirement.

Requirements:

• Diploma in Manufacturing/Production/Electronics Engineering
• At least 2 years of experience in electronics manufacturing industry
• Good knowledge in ERP/MRP system

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• Industry/ Organization Type: Transportation
• Position Title: 25T Lorry Crane Operator
• Working Location: Island Wide
• Working Hours: 6 days, Monday to Saturday (8.00am-5.00pm)
• Salary Package: Basic Salary $2,800 + OT
• Duration: Permanent

Key Responsibilities

• Operate a lorry crane with a valid Class 5 Singapore driving license.
• Coordinate with officers and prepare the daily work schedule efficiently.
• Respond to emergency tasks outside regular working hours, including late-night or urgent jobs.

APPLY NOW!!!

• Hold a valid crane operator certificate and have 1 to 2 years of experience in crane operations.
• On-the-job training provided, and candidates must complete the WSQ Lorry Crane Operator Certificate.
• Must hold a valid Singapore Class 5 Driving License.
• Be available to work on Sundays and public holidays as required.
• Ability to work independently and handle urgent tasks when needed.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70213 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Globecast is the leading global provider of content management and worldwide transmission services for professional broadcast delivery. The company operates a secure global satellite and fiber network to manage and transport 10 million hours of video and other rich media each year to direct-to-home satellite platforms; cable, IPTV, mobile and broadband headends; as well as corporate and digital signage networks.

Globecast Asia, headquartered in Singapore is primed to enhance its service offerings in the Asian media landscape. Globecast is an Orange subsidiary. We are seeking self-motivated individuals with a global mindset to be part of the Globecast family.

We invite applicants for the following position:

Technical Operations Center Operator

We are seeking a highly skilled and dedicated Technical Operations Center (TOC) Operators to join our dynamic team. The TOC Operators will be responsible for monitoring, troubleshooting, and maintaining the technical operations of a dedicated set of integrated systems designed to monitor a customer’s subscription video service. The service includes terrestrial networks and distribution systems. In addition to the essential functions listed below, this role will involve incident management and response to escalation from other Globecast BUs in other regions involved in the service. The ideal candidate must have a technical background in video, excellent communication skills, and the ability to thrive in a fast-paced environment.

Essential Functions :

• Demonstrate the ability to work well under pressure while exhibiting excellent customer service skills. Collaborate professionally with colleagues, supervisors, and customers to ensure a positive work environment.
• Communicate clearly and concisely, both verbally and in writing, providing accurate descriptions of events related to technical operation issues. Ensure effective communication with internal and external stakeholders.
• Participate in a fast-paced, deadline-driven environment, effectively juggling and prioritizing multiple tasks and demands. Adapt quickly to changing priorities.
• Conduct first-line fault diagnosis and rectification or escalate issues as necessary. Respond promptly to technical issues, coordinating troubleshooting and rectification efforts with internal and external stakeholders.
• Take responsibility for the deployment of redundant systems during failure conditions, ensuring minimal impact on services.
• Monitor video, audio, and other streaming services for quality and continuity. Escalate issues and discrepancies to supervisors or engineering staff for prompt resolution.
• Configure monitoring systems and perform low-level maintenance of transmission equipment and systems. Maintain a thorough understanding of operational procedures and signal flow within the scope of the TOC.
• Possess a comprehensive understanding of the technical configuration of media broadcast systems. Read and comprehend high-level signal flow and equipment documentation.
• Manage alarm systems and monitoring probes, utilizing tools. Experience using TAG monitoring is a beneficial. Generate logs and fault reports.
• Ensure all relevant documentation is correct and up to date. Respond immediately to on-air emergencies, restoring programming as quickly as possible. Accurately report all on-air anomalies and discrepancies using discrepancy reports.
• Perform other duties as assigned to meet departmental and company needs.

Qualifications & Requirements :

• Relevant Technical qualification from ITE; Polytechnic and/or equivalent qualification.
• Proficiency with MS Office (Word, Excel, and PowerPoint) and other basic desktop applications (i.e. MS Outlook, Exchange, internet tools, etc.) is assumed.
• Strong communication and good interpersonal skills.
• Familiarity with broadcast workflows.
• Understanding of streaming video.
• Keen interest in Sports & live broadcasting is an advantage.
• Monitoring of Video streaming services using probes and tools provided by premium OTT service provider.
• Manage the transmission path for acquiring video and routing sources ensuring overall OTT service availability.
• Respond to automatic alerts, escalations in timely manner and identify issue for proactive actions for service recovery.
• Open trouble tickets and activate incident management procedures by alerting internal and external teams. Remain service owner till the time issue is resolved and incident report is generated with conclusion.
• Receive and track maintenance notifications. Co-ordinate internally and externally to conclude such maintenance without or minimal impact on streaming services.
• Log issues and provide incident management reports.
• Manage communication with content partner and other global TOCs.
• Perform proactive transmission routine tasks.
• Perform request for streaming channels turn-ups and turn-downs based on standard communication.
• Previous working experience in similar roles would be beneficial.
• Prior working experience with video streaming systems is beneficial.
• Knowledge of video streaming formats and video broadcast ingest is recommended.
• Decision maker and problem solver, critical eye for diagnostics.
• Ability to perform technical troubleshooting to second line level, particularly networking.
• Must be willing to work rotating shifts that include nights, weekends and public holidays.

We regret that only shortlisted candidates will be notified.

• Manage day-to-day operations related to order fulfillment, procurement, inventory management, warehousing, and distribution
• Develop and implement operational strategies in streamlining processes, improve productivity and lower cost
• Maintain excellent control of inventory in a few locations
• Coordinate with manufacturing team to ensure consistent product supply
• Identify and implement technology solutions to improve operational efficiency
• Detailed reporting of weekly, monthly, and annual revenues and expenses.

Retail Operations

• Oversee daily operations and retail team
• Manage and forecast retail inventory and oversee stock levels
• Handle recruitment, training, and onboarding of new employees
• Identify current retail trends to adopt and study compeitive landscape
• Motivate retail team in meeting weekly/monthly sales targets and company objectives
• Analyze and develop sales strategies to maximize revenue and profitability
• Monitor retail expenses, including labor costs, inventory, and operational expenses
• Coordinate with the retail team to effectively disseminate information about changes in regular products, special promotions or festive launches
• Support retail marketing initiatives
• Oversee visual merchandise and optimize space

Requirements:

• Strong interpersonal skills and an effective communicator
• Analytical and has a keen eye for detail
• Positive attitude and an keenness to learn
• Enthusiastic personality
• Versatile and adaptable to changes
• Possess great initiative and is self-motivated

Note: The position will be based in China and Vietnam for 9-10 months

Salary up to S$9,000

Key Responsibilities:

• Implement advanced quality monitoring systems to ensure product integrity and optimize yield in electronics manufacturing processes.
• Proactively identify opportunities for process improvement and develop strategies to enhance product quality and consistency.
• Lead initiatives to resolve abnormal quality issues within the production process and ensure seamless integration of corrective actions.
• Collaborate with cross-functional teams to implement effective solutions, focusing on preventive measures to avoid future quality concerns.
• Drive initiatives to strengthen internal quality control procedures, improving overall process capability.
• Introduce and implement best practices aimed at streamlining processes and maximizing operational efficiency across the manufacturing workflow.
• Lead efforts to address and resolve customer-reported quality issues, ensuring timely and effective solutions are delivered.
• Prepare detailed reports for stakeholders, highlighting corrective actions, preventive measures, and ongoing improvements.
• Develop and oversee plans to optimize quality inspection procedures, ensuring accuracy and efficiency.
• Identify opportunities for automation and leverage technological advancements to improve inspection processes and outcomes.
• Foster open communication and collaboration across departments to maintain a cohesive and integrated approach to quality management.
• Oversee team coordination, including task assignments, performance management, and attendance monitoring.
• Develop and implement training programs aimed at enhancing the skills and knowledge of the quality assurance team.
• Supervise the timely completion of tasks and projects, ensuring all quality objectives and timelines are met.

Requirements:

• Bachelor's degree in Engineering (Electrical, Mechanical, Industrial, or Manufacturing), Quality Management, Operations Management, or related field.
• Minimum of 6-8 years of proven experience in quality management, with a focus on manufacturing processes.
• Strong analytical, problem-solving, and decision-making skills.
• Excellent leadership and interpersonal skills, with the ability to motivate and guide teams.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience working with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is highly advantageous.

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

• Operating and managing the pastry section of the kitchen and liaising with the executive and sous chefs to ensure a successful working environment.
• Preparing ingredients and handling baking and other kitchen equipment.
• Creating pastries, baked goods, and confections, by following a set recipe.
• Developing new recipes for seasonal menus.
• Decorating pastries and desserts to ensure beautiful and tasteful presentation.
• Monitoring the stock of baking ingredients.
• Ordering new supplies, ingredients, and equipment for the pastry section, when needed, and within budget.
• Ensuring their section of the kitchen adheres to safety and health regulations.
• Supervising and training staff members, when needed.

Our client is a leading player in Manufacturing industry. Due to business needs, they are now recruiting a Logistics Coordinator to be part of their Logistics Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Logistics Coordinator:

• Ensure accurate and timely documentation for all incoming and outgoing shipments.
• Update and maintain material movement records in the system and ensure inventory accuracy.
• Collaborate with warehouse and internal departments to align on requirements and priorities.
• Perform timely transactions in the SAP system and archive all related documents.
• Manage the purchase of indirect materials and generate weekly/monthly stock count sheets.
• Liaise with freight forwarders, arrange local deliveries, and handle RMA documentation.
• Maintain departmental safety and cleanliness standards.
• Contribute to process improvement initiatives and perform additional duties as assigned by the Logistics Manager.

Requirements:

• Relevant logistics experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a global MNC in providing engineering solutions. Due to business needs, they are now recruiting a QC Inspector to be part of their Manufacturing Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of QC Inspector:

• Handling goods, including picking, packing, and unpacking.
• Ensuring proper use, care, and maintenance of warehouse tools and equipment.
• Maintaining a clean, safe, and organized warehouse environment.
• Supporting other warehouse-related activities as needed.
• Assisting with additional tasks as assigned by the supervisor.

Requirements:

• Relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Responsibilities

• Provide Level 2 Support for Treasury and Market’s eFX Application
• Responsible for stability of production environments ensuring application and all interfaces have maximum availability.
• Collaborate closely with other internal technical teams/business users in investigating, testing and implementing Application fix
• Responsible for handling Change Management, raising Change Request and scheduling for the implementation of fixes and enhancements.
• Act as a facilitator and coordinate between various teams like Infrastructure, Level 1, Application vendor to resolve complex issues and outages
• Track incidents and provide regular updates to users on request status and progress
• Perform Root Cause Analysis and Regular Reporting to identify areas for review for improvement

Skills/Requirement

· Bachelor’s degree

• Write Unix scripts and suggest automation to improve efficiency/effectiveness of support team
• Work with ECNs and Liquidity Providers.
• Work on Oracle, MariaDB, KAFKA, OpenShift, MQ, CD, Jenkins, Bitbucket
• Work with Network and Firewall team.
• Work on FIX Protocol related set ups.

Interested candidates, who wish to apply for the above position, please send in your resume to: [email protected]

PERSOLKELLY Singapore Pte Ltd EA License No. 01C4394 EA Reg No: R23118975 (ABDUL RAHMAN ANSARI RAJA)

We regret to inform you that only shortlisted candidates will be contacted.

**********************************

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

**********************************

Seeking passionate individuals to be part of our new product launches where you gain first hand insights on food & beverage production from lab to market.

If you're seeking for flexibility and a comfortable work environment, do send in your application to us now!

*Working hours start from 1 day per week which will gradually increase over time as production volume expands.

Requirements:

• Able to start work in 1-2 days' notice (Must be available to work on 23 Oct)
• Able to withstand 9-10 hours of work with short breaks in between
• Working hours start from 1 day per week (around 9-10 hours/day) which will gradually increase over time as production volume expands.
• Must possess valid WSQ Food Safety Course Level 1 certification
• Bilingual proficiency, able to read and write in basic English and Mandarin
• Physically healthy as the work may require some heavy lifting (~20-25kg) of ingredients
• Strong sense of responsibility and must be meticulous to adhere to given instructions to ensure smooth operations

Responsibilities:

• Perform the full production process for a new beverage product
• Work closely with other production staff to ensure timely and smooth production process
• Familiarise with the production process in order to detect any irregularities for immediate reporting
• Ensure all hygiene measures and controls are in place at all times
• May require liaising with external parties eg. canteen operators on product placement and deliveries
• Any other food processing task as given by the management

This position may be converted to Permanent Position depending on operational requirements. Suitable for those returning to workforce and wish to start working on a smaller scope first before taking on larger duties.

Write to us with your CV and we're happy to discuss further!

ASM is a leading global supplier of products, services, and materials for semiconductor processing. For more than half a century, innovation has been at the core of everything we do. Our smart, ambitious people are dedicated to creating cutting-edge solutions for the world’s leading semiconductor providers. Every day we push the development of next-generation computer-chip technology, always staying a few steps ahead of what’s next.

The talented, enthusiastic people at ASM are just like you: dedicated to improving people’s lives and unlocking new potential. With our collaborative approach to R&D, we advance key semiconductor technologies and platforms like ALD, epitaxy, PEALD, PECVD, and vertical furnaces. And we have recently entered the promising high-growth market: silicon carbide epitaxy. Year after year, our innovations help to make chips smaller, faster, and more powerful. In fact, you will find our technology in every aspect of modern life: in AI, medical equipment, 5G, smartphones, autonomous driving, and more.

The role of Senior Business Analyst based in Singapore, is required to support monthly management reporting and forecasting, annual budgeting, and any other ad-hoc projects in Global Spares & Service Business Unit (GSS). In addition, this role will serve as a financial business partner to the Director of Sales & Service in Japan.

This is an individual contributor role and reports to Manager, Business Control (GSS).

Responsibilities

• Coordinate all forecast submissions for Global Spares & Service
• Consolidate and review forecast financial results of Global Spares & Service
• Work with Global Operation finance and review supplychain cost allocation
• Support budget preparation
• Support management reporting submissions to Global Spares & Service and Corporate Finance
• Business Partner to the Director Sales & Service and the Marketing manager for Japan
• Monthly forecasting and annual budgeting of Japan
• Manage month end closing activities and variance analysis for Japan
• Drive cost and efficiency improvements for Japan
• Ensure compliance on revenue recognition and with internal controls
• Warranty review and analysis
• Support financial and non-financial projects

Qualifications

• University graduate and above in Accountancy/Finance related fields
• Minimum 5 years of finance & accounting experience with a successful track record in management reporting and financial planning and analysis at regional level with experience from high-mix equipment manufacturing environment
• Flexible and able to work in fast-paced environment.
• Excellent knowledge of accounting principles eg. IFRS 15.
• Excellent presentation and communication skills both written and verbal and must be able to effectively work in a cross-functional and global environment.
• Proficient in the use of MS Office (eg. excel)
• SAP knowledge a must; with Anaplan and Power BI
• Organized, meticulous and paying attention to details
• Self-motivated and results oriented, hands on, proactive, able to prioritize to meet deadlines
• Strong analytical, problem solving, and organizational skills with strong business acumen

At ASM we are committed to supporting our people, enabling them to develop their talents and perform at their best. We actively promote an inclusive and diverse culture that fosters trust and transparency. Our people are our power, and we value the differences between everyone because it is what make us better as a team. By embracing a wide range of perspectives, we enable a culture of continuous exploration and adoption of new ideas. At every step, we know that it is our valued people who enable us to deliver excellent products and service to our clients – and to make a meaningful difference in society.

So join us on our journey and unleash the power of an open mind. Discover how you can be part of our exciting future and apply today! To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram and YouTube.

1. Checking the kitchen and equipment, monitored and make sure outlet operations running efficiency
2. Make sure outlet staffs prepared food follow by policies & procedures, ensure minimise food wastage
3. Ensure staffs compliance to all safety policies & procedure
4. Monitored outlets neat & clean all the times, ensure all outlets maintaining hygiene standard
5. Plan and arrange duty roster for outlet staffs, make sure enough manpower to support operation
6. Assist in hiring new outlet staffs, handling the phone calls from candidates and process onsite interview
7. Assist in setting up new outlet or closing down outlets
8. Adhere to the company policies and procedures and comply with the Code of Conduct
9. Interact with department and team members, management, and contractors professionally and positively
10. Monitored performance of all team members, encourage good relationships, promote team spirit, and ensure effective two-way communications
11. In Coordination with HR department to arrange training sessions and refresher courses for outlet staffs
12. Provide supervision, guidance and leadership for teams to achieve sectoral goals
13. Other ad hoc duties