Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Job Responsibilities:

• Develop and implement quality assurance plans, standards, and protocols for production or project management.
• Review project specifications and engineering drawings to establish quality standards.
• Ensure all work complies with relevant codes, ISO standards and regulations.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Identify and document any quality issues, non-conformance and corrective actions.
• Providing guidance and advice to the Project Manager on significant changes to the quality management system with direct impact on site operations.
• Training the production team on quality control measures to improve product excellence.
• Collaborate with production, engineering and project management teams to identify and implement process improvements.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Conduct root cause analysis for site level NCRs and recommend corrective action and preventive actions.
• Overall knowledge of safety policies and procedures to achieve safe work practices.

Requirements:

• Diploma /Degree in Engineering, Quality Management or related filed.
• Minimum 5 to 8 years of working experience quality assurance/control in industrial /equipment production or engineering projects would be advantageous.
• Proficient in quality inspection tools, data analysis and report writing.
• Up to date knowledge of federal and industry standards and best practices.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Excellent problem solving and analytical skills.
• Keen attention to detail.
• Willingness to travel for site inspections.
• Able to work independently and a good team player.
• Candidate who can start work within short notice or immediately would be advantageous.

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

General Description

The incumbent is responsible to provide technical process support to the Production Shift teams and the Facility Owner of the process area in the LNG Terminal.

Roles and Responsbilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

• Provide technical support for routine and non-routine production activities and develop best practices to improve production safety, reliability and efficiency.
• Evaluate current production activities, make recommendations and execute continuous process improvements in the areas of safety initiatives, equipment reliability and operational excellence.
• Troubleshoot for process and equipment problems to ensure greater operational reliability and efficiency
• Measure plant performance including power consumption index, operating index relating to process availability, efficiency and reliability and other relevant field data surveys.
• Undertake energy efficiency and optimisation projects as required.
• Undertake alarm management for assigned area and proactively drive alarms to ensure robust operations.
• Undertake Management of Change (MOC) for terminal modifications and take on lead role for various MOC projects as required
• Support engineering design analysis including preliminary design development, (heat and mass) calculation, technology evaluation and equipment selection.
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, model reviews, Safety Integrity Level reviews, RAM analysis, layout and other process etc and support the design validation process in alignment with contract and regulatory requirements and specifications.
• Review standard operating procedures and start up manuals to ensure compatibility with design limitations and procedures are adequate.
• Lead, review and perform inspection and investigation of equipment and production systems to facilitate optimisation and formulate remedial procedures.
• Assist the Production Manager to report and investigate any related HSSE near miss / violation.
• Custodian of Operation Abnormality Reports, to manage the overall status of the reports, perform initial investigation to determine root cause and to drive root cause analysis and resolution.
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum of eight (8) years practical experience in process engineering function in an oil, gas or petrochemical industries.
• Conversant with local/international codes, regulations, standards, best practices in the process.
• Good knowledge of commissioning, operations and troubleshooting of a variety of large and complex processes in the oil, gas or petrochemical industry is critical.
• Knowledge of the LNG / natural gas or other hydrocarbon industries would be advantageous. Candidates with experience in cryogenic plant design, commissioning and start-up are preferred.
• Certified Energy Manager certification will be an advantage.
• Knowledge of Process Safety Management, Process Hazard Analysis and Functional Safety would be advantageous
• Knowledge of electrical, instrumentation, controls and mechanical discipline would be advantageous
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Self-motivated, independent and strong team player
3. Strong interpersonal, written and verbal communication skills
4. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties.

Education

Bachelor degree in Chemical Engineering

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines.
• Supervise and coordinate site installation works by contractors.
• Attend site coordinate meetings with main-con, consultants and contractor.
• Lead daily briefing and execute the project activities and oversee implementation of the quality plan.
• Coordinate installation activities, site safety, order, arrange and receive M&E major equipment delivery for contractors’ installation.
• Arrange and attend material, equipment, installation, and testing inspection.
• Carry out testing and commissioning, combined services testing for TOP/CSC,
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards and safety aspects.

Requirements

• Min Diploma in Building M&E Service (ACMV, FP, P&S, BMS, Ele and ELV) , Mechanical and Eletrical Engineering
• Min 5 years of experience
• Familiar to Building services (ACMV, FP, P&S, BMS, Ele and ELV) code requirement and basic design and necessary submission for tender bidding and construction, TOP and CSC
• Experiences for coordination with architecture, C&S and process team for M&E Space, maintenance and fire exit routing
• Skilled in design, coordination, and project management
• Experience in tender bidding, with strong analytical and critical thinking abilities
• Interpersonal, communication skills & leadership
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification are highly desirable

Job Description

• Lead, Plan, organize, supervise and liaise closely with operation team on all lifting activities.
• Overall in-charge for preparing lifting and erection plan for all the Crawler or Mobile Cranes.
• Prepare, develop and review Lifting plans, Method Statement, Risk Assessment and Safe Work Procedure of all executive teams for any lifting activities.
• Conduct routine checks and inspections on work site to ensure compliance with authorities and client’s requirements.
• Daily walk about around assign areas of site and make a note of compliance and non-compliance to HSE operating procedure and works are carried out safely.
• Able to prepare and review lifting plan and coordinate site lifting supervisors, riggers and signalman, and being the focal point for all site lifting operations Perform discipline checks of the procedures and analysis.
• Read project specifications and provide feedback from an engineering perspective. Liaise with clients, and project teams.
• Coordinate and interface with Client/ other contractors to harmonize the onsite lifting arrangement.
• Conduct safety assessment & discussion with EHS team (safety) for any latest safety policy and implement the safety requirement when needed.
• Periodically monitor and implement any procedural changes according to the local authority / client’s requirement & regulation updates.
• Periodically monitor and execute the lifting work improvement at lifting site inclusive all facilities/tools.

Requirements

• Degree in Civil Engineering or any related Engineering
• Minimum of five (5) years site experience and has attended MOM or Institute of Engineers Singapore conducted Appointed Person - Lifting Operations course to oversee the activities of the various lifting operation on site
• Able to communicate well (spoken and written).
• Possess a willing to learn and proactive attitude.

Responsibilities:

• Prepare CAD drawings, REVIT/BIM to support customer’s project specifications and requirements
• Create drawings based on PDF, hand drawn or verbal instructions using AutoCAD to support customers’ project requirements
• Calculate material requirements and liaise with internal team for accurate and timely material orders
• Prepare drawings and compile documentation for project submission

Requirements:

• Possess 3 years of proven experience in AutoCAD/REVIT/BIM, preferable in mechanical engineering field
• Possess excellent computer skills in AutoCAD software, BIM and MS Office (Excel, Powerpoint, Word & Project)
• Independent, team player with ability to multi-task
• Possess strong communication and organization skills

You may apply to below link,

https://sg.quickhr.co/view_job.php?jd=MTJxdWlja19ocl9yZWNydWl0bWVudA==&cd=MjA5MHF1aWNrX2hyX3JlY3J1aXRtZW50

*Due to the volume of applications, only shortlisted candidate will be notified. Thank you for your understanding and application.

Job Description

• Supervision of civil and structural works in accordance to the project specifications, construction drawings and Building Control Act and Regulations
• Responsible for site supervision with the RTO as a team and resolve all site issues
• Manage the site supervisors with respect to civil and structural engineering works.
• Attend site, progress, variation and coordination meetings
• Ensure site safety and prepare safe work procedure with Safety personnel
• Ensure the smooth completion of the project

Job Requirements

• Degree in Civil & Structural Engineering or equivalent
• Registered Resident Engineer (with BCA / IES / ACES) with minimum 5 years of Resident Engineer Industrial experience
• Strong Interpersonal and communication skills

About the Opportunity

The IT Engineer provides support to employees experiencing technical problems and performs troubleshooting, problem diagnosis, resolution, and escalations. In-depth knowledge and hands-on experience with system and server administration and virtualization experiences are required. Area of expertise for this position includes Microsoft technologies, VMware virtualization, Citrix VDI, Linux and storage. Prior experience supporting L1 and L2 requests in IT would be helpful for this position.

Job Responsibilities:

• Primary responsibilities will include overseeing and executing system-based projects, writing scripts to automate manual processes, and creating system documentation & diagrams. Provide system administration and configuration of specialized mission applications and software.
• Strategic Infrastructure Management: Global Administration, maintenance, and support of the Server environment and VDI infrastructure, ensuring optimal performance and scalability to meet the evolving needs of the organization as the need arise.
• Incident Resolution and Technical Escalations: Act as a point of escalation for complex technical issues, leveraging your advanced troubleshooting skills to swiftly diagnose and resolve incidents, minimizing impact on business operations.
• Advanced Problem Analysis and Resolution: Conduct in-depth analysis of system problems, particularly those related to hardware, software applications, and operating system servers, employing sophisticated diagnostic techniques to implement effective solutions.
• Comprehensive Documentation and Knowledge Management: Develop and maintain comprehensive documentation, including automation scripts and procedures, to streamline troubleshooting processes, enhance team collaboration, and ensure continuity of operations.
• Root Cause Analysis and Problem Management: Lead root cause analysis efforts for critical problems and major incidents, identifying underlying issues and implementing preventive measures to mitigate future occurrences, thereby safeguarding business continuity.
• Proactive Performance Monitoring and Security Compliance: Utilize advanced monitoring tools and command-line interface utilities to continuously assess server performance, identify potential vulnerabilities, and ensure adherence to stringent security standards.
• Change Management and Risk Mitigation: Spearhead the planning, coordinating, and executing system software upgrades, patches, and firmware updates, meticulously evaluating risks and impacts to minimize disruptions and maintain system integrity.
• Effective Communication and Stakeholder Engagement: Interface with IT management, end-users, and departmental teams to communicate feedback, share insights, and champion initiatives aimed at enhancing operational excellence and delivering exceptional service quality.
• Follows SOP: Support procedures and provides troubleshooting guideline and cause analysis for technical issues

Job Requirements

• BS degree or equivalent experience.
• 8 + years of advanced experience as a IT Administrator or Engineer with hands on experience in servers, virtualization and storage.
• Active Directory (AD) & Domain Controller Administration including DNS and GPO management in a multi-site environment.
• Building and administering Windows\Linux servers and accompanying infrastructure, maintaining capacity and performance in enterprise environment.
• Candidates must possess experience with both Windows and Linux mixed environments.
• Experience with Infrastructure – virtual environment, VDi, Citrix Netscalar, Backup& Restore, disaster recovery and business continuity
• Hardware: Dell MX7000 Chassis and MX700 series blade configuration, PowerEdge rack servers
• Storage: NFS and ISCSI storage concepts. Cronjobs and rSync functionality
• Networking: TCP/IP, VLAN, DNS, Load Balancing and security concepts
• Virtualization: VMware 7 and above and Citrix Storefront
• Transferable Skills: Communication, ability to work with a diversity of people, ability to plan and organize, time management, analytical problem solving, Project Management, & customer service skills.
• Strong communication and collaboration skills
• Ability to work independently and as part of a team.
• Willingness to learn and adapt to new technologies and processes.
• Ability to multi-task in a fast-paced IT environment with fluctuating priorities and deadlines.
• Ability to interface and work with varied positions and levels of technical knowledge both within the department and with other departments in the company.

Responsibilities:

• Performs activities related to the electrical works and maintenance needed onboard vessels

• Systems / power generation / backup power source / fire detection system and safety system for 2 stroke or 4 stroke engines

• Assist to guide onboard service engineers on the task which require electrical engineers’ competencies so as to operate and maintain electrical/electronic/electro-hydraulic/electro-pneumatic/automation systems efficiently.

• Termination works on vessel / Trouble shooting of 4 stroke generator safety system / Electrical governors would be value added

• Advise customers / Supt, the need of shore assistance or need to procure spares in case defects of equipment failures which cannot be resolved thru onboard attendance.

• Carry out on board attendance in liaison with the Service manager

• Provide work done report and submit to service managers

• Experience in carrying out maintenance marine alternators is a plus

• Carry out annual calibration of Cargo tanks Temperature and Pressure sensors, manifold pressure gauges of fleet vessels

• Identify areas for improvements and to have good PR in dealing with customers in SG or Overseas regardless of location

Requirements:

• Diploma in Electrical Engineering / Technical Cert

• Preferably 5 years of relevant work experience in Marine Electrical Industry.

• Hands on experience working onboard sea going vessels as ETO (Electrical-Technical Officers) would be value added

• Possess good knowledge of electrical power distribution, maintenance and practical hands-on skills

• Proficient in troubleshooting & fault diagnosis skills related to electrical, instrumentation, automation & control and including air conditioning and ventilation system

• Able to read and understand Engineering Drawings (Electrical and pneumatic)

Familiar with regulatory and legislative shipping industry environment

A team player and collaborate well with office technical team as well as shipboard team

• Able to communicate well and Fluency in English in both written and spoke

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules
• Check and ensure all the temporary work is carried out as per PE design

Requirements

• Degree in Civil Engineering or equivalent
• Min 2 to 3 Years Relevant Work Experience (C&S RC / building work)
• Proficient in English writing and speaking
• Microsoft application (words, excel, ppt etc)

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. There is no CPF contribution for the programme. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Role Description:

VS1

This position reports to the Production Manager or the Director of Value Stream and is an integral member of Production Management Team. GSK is committed to an employee-orientated, high performance culture that emphasises process automation, quality compliance and continuous improvement.

Pilot Plant

This position reports to the Associate Director Operations & Risk and is an integral member of Operations & Logistics Management Team. GSK is committed to an employee-orientated, high performance culture that emphasises process automation, quality compliance and continuous improvement.

Trainee to be involved in:

V

• To supervise, execute and monitor the activities within the value stream to ensure reliable and optimal operation of processes, equipment, utility and facility so as to achieve target production levels within the framework of current Good Manufacturing Practice (cGMP), quality, safety, occupational hygiene and environment protection.
• Identify and implement improvement to plant facilities, processes, methods of operations and turnaround, troubleshoot for process and equipment problems to minimize safety and quality risk as well as to ensure greater operational efficiency.
• Lead or support quality or safety related investigation using appropriate problem-solving tool to determine the root causes and implement CAPA to prevent recurrence.
• Conducts audits and investigations, participate in audit preparation and complete identified actions in the assigned work area(s), in order to ensure compliance with GMP and safety requirements.
• Prepare documents relating to manufacturing, plant turnaround, Local Operating Instructions (LOI), Local Standard Operating Procedures (SOP) and training manual to ensure that updated documents exist to support the activities of the operations department, schedule plan orders, and materials assignment. Documentation should comply to Data Integrity requirements and adherence to ALCOA principles.
• Support the Production Manager in new product introduction or plant trials and prepare and complete all necessary documents related to plant trial within the stipulated timeline.

Pilot Plant

• To supervise, execute and monitor the activities within the Jurong Pilot Plant to ensure reliable and optimal operation of processes, equipment, utility and facility so as to achieve target production levels within the framework of current Good Manufacturing Practice (cGMP), quality, safety, occupational hygiene and environment protection.
• Identify and implement improvement to plant facilities, processes, methods of operations and turnaround, troubleshoot for process and equipment problems to minimize safety and quality risk as well as to ensure greater operational efficiency.
• Lead or support quality or safety related investigation using appropriate problem-solving tool to determine the root causes and implement CAPA to prevent recurrence.
• Conducts audits and investigations, participate in audit preparation and complete identified actions in the assigned work area(s), in order to ensure compliance with GMP and safety requirements.
• Prepare documents relating to manufacturing, plant turnaround, Local Work Instructions (WI), Local Standard Operating Procedures (SOP), Training Material (TRN) and Operations Logsheets to ensure that updated documents exist to support the activities of the Operations department. Documentation should comply to Data Integrity requirements and adherence to ALCOA principles.

We are looking for you with below attributes:

VS1 & Pilot Plant

• Degree in Chemical Engineering

What you will learn:

VS1 & Pilot Plant

• Foundational on-the-job training experience working in cGMP and key Global Supply API manufacturing site with state of art manufacturing facilities, including first in class Continuous Manufacturing facility
• To train to be an advocate for Continuous Improvement, with introductory basics on Lean Sigma concepts, learn to apply independently and lead others to do the same.
• Team leadership through influence and communication

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Jurong.

How can I apply?

Applications are now open. Click on the button above to apply.

We recommend you apply as soon as possible, because we accept ongoing applications and offer positions on a first come, first served basis!

At GSK we value diversity and treat all candidates equally. We strive to make our recruitment process free of bias of any kind and aim to create an inclusive workplace at GSK. If you require any assistance, either to attend an interview or during the course of the recruitment process, please let us know.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Lead a team of mechanics in the repaif of MAN engines
• Trouble shoot and advice on electrical /mechanical systems problems and carry out triuble shooting on engine problems
• Assist the Service Manager / Asst Manager- Repaid in coordinating subcontractors of mechanical / electrical works
• Advise customers on the service, maintenance and repair of engines and ship system affecting the engine
• Answer all technical enquiries from customers as assigned by the Service Manager / Asst Manager-repair
• Carry out any other work as directed by the Service Manager/ Asst Manager - repair

Responsibilities:

• Handle all incoming sales inquiries from potential sales avenues, responding promptly and professionally to customer queries.
• Initiate and coordinate sales activities by engaging with customers to understand their needs and preferences, and providing expert guidance on our products or services.
• Prepare and deliver technical presentations that effectively communicate our products' or services' features and benefits to potential customers.
• Develop and nurture new and key accounts, working towards exceeding sales goals and objectives. Build long-term relationships with customers.
• Provide pre- and post-sales technical support to our customers, addressing their questions, and concerns, ensuring a smooth experience with our products or services.
• Actively follow up with customers to assess their needs and encourage potential orders, ensuring high customer satisfaction and loyalty.
• Oversee the procurement of materials for assigned projects and tenders, ensuring that the necessary resources are available to meet customer demands.
• Assist in the company's marketing strategies, including website updates, ordering of catalogues, and coordination of trade shows. Collaborate with the marketing Department to promote the company's products and services effectively.

Requirements:

• Diploma or Degree in relevant Engineering Fields
• Minimum of 3 years of working experience preferred.
• Possesses good communication skills and is able to work independently with minimal supervision.
• Meticulous, self-motivated, positive working attitude and multitasking
• Preferably possess your own vehicle, petrol card and vehicle allowance will be provided on top of basic salary.

Join Us:

• Close-knit team with a warm and friendly working environment
• A rewarding and exciting career with excellent progression and employment benefits
• Flexible work hours (2-hour shift start/end flexibility)
• AWS, Company, Mid and End-Year variable performance bonus

• Devising and implementing methods and procedures for inspecting, testing and evaluating the
  precision and accuracy of products and production equipment.
• Designing and analyzing inspection and testing processes, mechanisms, and equipment.
• Conducting quality assurance tests and performing statistical analysis to assess the level of
  control and manage product quality risks.
• Undertaking root cause analysis of incidents requiring corrective action.
• Ensures that corrective measures and deviation meet acceptable reliability standards and that
  documentation is compliant with requirements An Experienced Professional (P2) applies practical
  knowledge of job area typically obtained through advanced education and work experience.

· Good knowledge of engines especially slow speed engines which is a must; experience with medium, high speed diesel and gas engine would be an advantage.

· Possesses good leadership attributes, able to lead a team of technicians to achieve given task.

· Independently to perform inspection, installation (incl. engine alignment), repair, upgrading, troubleshooting and overhaul of diesel engines and auxiliary equipment.

· Ability to communicate with customer/ship owner reps/Class/sub-contractor including arrangement of work/entry permit through email and phone.

· Be prepared to travel extensively.

· Able to prepare a hand-written work done, with data recorded as per format templates and service report with photos, upon completion of job.

Responsiblities :

1) To manage and coordinate site steel structural Work.

2) Oversee operation on a day to day basis.

3) Ensure the works are done in safety, on time and within budget.

4) Mediate on site conflicts.

5) willingness to work a flexible schedules.

Qualifications :

1) Degree in Structural Engineering.

2) 3-5 years experience in a construction environment.

3) Budget Management experience require.

4) Valid class 3 Singapore driving licence.