Job Description :

• Design and implement Building Management Systems for commercial, industrial, or residential buildings.
• Analyze project requirements, propose technical solutions, and oversee the implementation of BMS systems.
• Develop and program control logic for to optimize building operations and energy efficiency.
• Troubleshoot and debug control systems to ensure optimal performance and integration.
• Configure and integrate high-level communications for devices, including sensors, controllers, actuators, and field devices.
• Ensure smooth communication between BMS components and external systems.
• Design, develop, and implement user-friendly BMS graphics and dashboards to provide operators with real-time insights into building systems.
• Ensure that graphics are intuitive and provide comprehensive control and monitoring features.
• Implement and maintain SCADA systems for large-scale monitoring and control of building operations.
• Integrate SCADA systems with existing BMS components to provide centralized control.
• Create and maintain detailed design, development, and implementation documents, including system architecture diagrams, control logic, and commissioning reports.
• Ensure that all design and development documents are up-to-date and accurate for future reference.
• Collaborate with other engineers, designers, and stakeholders to deliver high-quality solutions.
• Provide technical support during project implementation and post-installation phases.
• Assist in training building operators on the proper use and maintenance of the BMS system.

Requirement :

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Hands on experience in DDCs and PLCs
• Knowledge in HVAC systems, SCADA software, Building Management systems would be an added advantage
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

Purpose of the Role

The Engineer, Inspection has a critical role in ensuring that ARLANXEO's plant equipment is maintained to a high level of reliablity via the proper use of Maintainence and Engineering Standards and Codes. Her/his objective will be to ensure compliance with safety standards, local legislation, statutory requirements and regulations as well as Corporate guidelines while performing related duties and all other related works.

Job Description

• Manage and perform all static equipment inspection (pressured equipment, piping, PSV, etc).
• Manage PVMS to MOM CLA extension scheme and Steam/Air equipment RBI.
• Response to plant requirements to mechanical inspection for static and safety devices, Promptly and timely response to requests for assistance to meet execution team expectations
• Provide technical expertise to identify and make recommendation to solve static equipment problems either directly or through accurate identification of a problem and participating with functional engineering team in problem solving.
• Propose improvements of static equipment installation and utilize the LMS management of Change (MOC) process including proper documentation of the change.
• Lead in Static Equipment inspection scoping in major shutdown and turnaround.
• Support unscheduled/emergency or schedule plant shutdown/turnaround as required.
• Support Go-live, deployment and usage of IDMS and Future RBI initiatives.
• Liaise with maintenance planner, engineers and others supervisors to improve PM schedules.
• Supervise the contractor’s work in the facility or shop to guarantee safety and quality and reliability of work.
• Perform Root Cause Analysis of failures and develop counter measures to prevent future failing of Equipment.
• Develop work procedures in the area of responsibility.

Requirements

• Degree in Mechanical Engineering with at least 5 years’ of maintenance experience in Oil & Gas / Petrochemical or Chemicals industry.
• Industrial Certifications: API510, API570, AWS-CWI.
• Skilled in Materials selection, Material Degradation Mechanisms and NDT
• Working knowledge of API/ASNE/ASTM/TEMA.
• Familiar with PI, Microsoft Office, Project, Outlook and SAP systems.
• Self-confident and able to work independently with minimum supervision but also, a good team player.
• Good interpersonal, analytical, troubleshooting and problem solving skills.

Job Responsibilities:

• Source and identify suppliers for direct/indirect materials/services to expand supplier base and for new project/production needs;
• Obtain quotes from newly source suppliers to provide costing and cost reduction;
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/service;
• Develop and negotiate favorably supply agreement with suppliers;
• Work with Engineering/Unit Sales to analysis Sales Contract’s scope of supply and provided Sales Contract BOM Cost to Management;
• Support in providing Project Costing;
• Other ad-hoc duties as assigned.

Requirements:

• Diploma or Degree in Mechanical Engineer/HVAC in or equivalent;
• Proficiency in both written and spoken in English and Mandarin as to liaise with relevant Mandarin speaking counterparts;
• Excellent organization problem solving and negotiation skills.

Job Purpose:

Service engineer to carry out preventive and corrective maintenance of machinery, industrial vehicles, heavy machinery and waste collection equipment.

Opportunity to develop as a professional within heavy duty machinery sector through continuous training programmes to ensure the necessary technical and skills.

Main Duties and Responsibilities:

• Preparation of necessary material and stock control
• Diagnosis of breakdowns, either electric, mechanic or hydraulic.
• Interpretation of electrical and hydraulic diagrams to apply correct solutions
• Inspection and repair of electrical, mechanical and hydraulic breakdowns and analyze possible malfunctions of machinery.
• Preparation of needs of materials and stock control

Accountabilities & Commitments Required

• Able to attend breakdowns after office hours and weekends
• Commitment to join a growing company and take full responsibility to be part of a team

Education / Qualifications

• Technical education
• Fluent in English
• Other laguanges

Job-related skills & abilities

• Class 3 driving licence
• Analytical Skills for problem-solving

Other requirements

• Customer Satisfaction, Aftersales, and Customer Service skills
• Previous experience in a similar role in the waste management industry will be a plus point

Job Scope

• Involved in planning and development of projects.
• Assist to develop mechanical and/or electrical engineering designs based on project requirements, from conceptual to schematic and detailed designs.
• Assist to design mechanical and electrical systems.
• Assist to conduct project assessments and is able to suggest feasible and creative solutions based on the assessment results.
• Support tendering process.
• Assist to plan the team's manpower and provides on-the-job guidance to junior staffs

Requirements

• Degree in Mechanical or Electrical Engineering or related fields
• Meticulous and highly detail-oriented.
• Has a keen interest to incorporate new technologies into engineering design projects.
• Excellent knowledge in mechanical and/or electrical engineering fields
• Good problem-solving skills.
• Good interpersonal and project coordination skills crucial for networking with internal and external stakeholders.
• Required to work both in office and at project sites.
• Applicants with good experiences will be considered for Senior positions

Job Description – Service Engineer (Maintenance Lead)

We are looking for a Service Engineer as Maintenance Lead to lead and supervise the maintenance team in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Engineer shall report to and under the supervisory of the Maintenance Manager (Reporting Officer (RO)). Hiring shall be 1 year services contract via agent arrangement with option to extend or convert to direct outsource or permanent hiring.

Responsibilities

· Assist the RO in Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks and devise maintenance schedule and resources planning and deployment.

· Provide solution guidance to the Service Technicians and generation of maintenance documentation such as PM & CM report to RO for review and final release to customer.

· Provide CM on faults to establish root cause on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment

· Plan and perform PM to system equipment at scheduled/ periodic basis including O-level testing and sensors calibration to ensure optimal operational performance

· Collaborate with OEM to establish root cause of fault findings and D-level components repair

· Supervise sub-contractor performing maintenance at site

· Convey updates to RO and customer on maintenance progress.

· Review with RO on maintenance processes and resources etc for maintenance process improvement.

Requirements

· Holding recognised Professional Certificate minimum with Higher Nitec/Diploma/ Degree in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution or at least 5-yearsworking experiences in above mentioned engineering fields.

· Advantage if have the knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting

· Resourcefulness and logical in problem-solving aptitude.

· Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc

· Ability to lead and manage a team, and to work independently with minimum supervision.

· Ability to conduct risk assessment and provide advisory to the team member and RO.

· Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).

· Ability to converse well in English language and technically.

Job Description:

• Conduct site testing & commissioning activites
• Carry out field services such troubleshooting, repairing, maintenance & operation of electro-hydraulic machines
• Preparation of equipment and spares for project mobilization
• Support the project team during the fabrication, assembly & testing stages

Job Requirements:

• Candidate must possess a Degree/Diploma in Electrical/Mechanical Engineering
• At least 2 Year(s) of relevant working experience
• Preferably with knowledge of hydraulics, electric drives, controls
• Good troubleshooting & communication skills
• Willing to travel overseas frequently
• Independent, resourceful & responsible
• Inexperienced applicants are also welcome to apply

As the Facility & Security Engineer, you will be responsible for overseeing all aspects of facility operation, maintenance and projects within our electricity generating plants, ensuring compliance with local regulatory policies. In addition, you will be involved in the development of a Facilities Asset Management Plan, identifying improvement opportunities and implementing best practices.

Responsibilities:

• Plan and coordinate infrastructure and equipment maintenance schedules & activities.
• Respond to work order requests and equipment maintenance schedules & activities.
• Investigate, analyze and determine root cause and report breakdowns and faults effectively.
• Carry out and review facilities’ maintenance programs and recommend actions as required.
• Identify and report on plant and equipment inefficiencies and possible improvement initiatives.
• Evaluate operational systems and facility infrastructure to ascertain and improve operational efficiencies.
• Monitor and review plant infrastructure, asset life expectancy and implement long-term maintenance plans.
• Prepare Purchasing Documents for the purchase of spares & the purchase of Work Services required to carry out the rectification works of the faulty equipment, faulty buildings’ infrastructure etc. (E.g. Preparation of tender specifications for service contracts such as cleaning, landscaping, pest control, waste disposals, card access systems, lifts & sewerage treatment plants’ service & maintenance works, auto-gates/ auto-barriers maintenance).
• Prepare the Facility Asset Management Plan (AMP).
• Design and oversee the implementation of facility expansion, layout, systems, and quality controls.
• Engage contractors and establish procedures to supervise and monitor the performance of contractors to ensure that the company’s requirements for work services are met.
• Ensure compliance with relevant regulations, building codes, and health and safety standards.
• Prepare technical reports on breakdowns, proposals and compliance documents.

Requirements:

• Degree in Mechanical, Electrical, Facilities Management Engineering or equivalent.
• Experience with SAP, and MS Office, especially Excel & PowerPoint.
• Knowledge of the building regulatory requirements in Singapore.
• Strong verbal and written communication skills.
• Strong troubleshooting, problem-solving and project management skills.
• Experienced in managing small to medium scale plant & building facilities incorporating maintenance plans, scheduling, costings, and cost controlling.
• Experienced in carrying out plant & buildings maintenance works, demonstrates personal creativity and/or flexibility in problem solving and budgeting process approaches

A member of the Electrical team, you will be responsible for performing Electrical maintenance works in accordance to maintenance plan including carrying out projects as required.

Job Descriptions:

• Perform troubleshooting and root cause analysis to resolve plant faults
• Execute approved plant improvement works and prepare technical specifications for equipment parts, work services and raise requisition papers
• Perform scheduled plant inspection according to maintenance regime and execution of plant maintenance activities
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Preparation of weekly and monthly activity reports, overhaul, technical and trip reports
• Perform other duties as assigned by supervisors

Job Requirements:

• Graduate in Electrical Engineering with a keen interest to build a career in the Power industry
• Sound knowledge in Electrical
• Self-motivated team player; analytical mind with strong planning & problem solving skills
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome

company's major works interior works & mixed construction works

Required minimum 2 yrs experience

educational qualifications are bachelor degree civil engineering or

Diploma in civil engineering

good experience in Autocad drawings & interior designings

prefered with driving License ( class 3 level )

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

• Working hour: 9am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Descriptions

• Build and install offshore generator/fire pump systems;
• Onsite planning and managing of installation teams, sub-cons;
• Supporting assistant to project manager and ad-hoc;
• Project Management, including effective cost, time and quality control, manpower planning, Material Take Off & etc
• Overall project schedule and expertise to meet project objectives and deliverables;
• Involve in negotiation with subcontractors and suppliers with commercial personnel where necessary;
• Liaise with clients and consultants on project requirements and attending meetings;
• Complete assigned projects on schedule and within budget;
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks;
• Prepares for engagement reviews and quality assurance procedures;
• Ensure that Health, Safety and Environmental Safety standards are met;
• Supervision of project engineers and other project team members;
• Ensure smooth delivery of the project completion/site commissioning

Requirements:

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechatronics), Engineering (Mechanical), Engineering (Electrical/Electronic) or equivalent.
• Minimum 5 years as Project Engineer in oil & gas industry, Energy industry and must have experience in M&E
• Completed medium sized projects from start to finish
• Previous project experience in relevant fields e.g. offshore projects, marine projects etc.
• Commercial knowledge
• Offshore general Safety Course for Project Manager
• Managing Work at Height Course
• Workplace Safety and Health Risk Management Course
• Possess high level of integrity, good interpersonal and strong leadership skills.
• Good communication skill
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative, and passionate about energy generation
• Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Job Responsibilities:

• Implement QA plan, review, and revision for company level.

• Report on quality related matters to the QA/QC Manager and/or immediate superior, including preparation of monthly summary To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support To develop and manage the quality control and quality assurance procedures and ensure compliance.

• To prepare Inspection and Test Plan (ITP) and Inspection Reports Maintain the ISO and related certifications for company level.

• To perform needed tests on site to ensure works are done according to the contract specifications. Preparation of document submissions for client approval.

• Attend meetings and liaise with the client to ensure that quality requirements are being followed at all times.

• Maintain document record master list pertaining to equipment and monitor on the calibration status. Coordinate and make arrangements for equipment calibration when due.

• Compile and receive relevant material certificates and other required certificates and test report from vendors/suppliers. Coordinate with relevant testing laboratories for testing and witnessing.

• Compile and maintain quality records e.g. Request for Inspection (RFI) and verify as necessary. Coordinate on-site quality assurance and control activities.

• To conduct independent Quality Assurance check on and off site.

• Report non-conformities to the QA/QC Manager and/or Project Manager, perform analysis, identify root cause and propose corrective actions.

• Maintain and control QA/QC practices on daily basis with regular checks and inspections ensuring correct operation and implementation of procedures.

• Advise and assist the project team members on QA/QC matters. Assist in the development of internal QA/QC checklists.

• Implement and enforce Quality Control Plan.

• Verification and checks on raw/incoming materials and/or FG. Documents for non-conforming works and corrective action.

• Identify and assess any foreseeable risk arising from workplace or work processes, minimize environmental impact associated with the manufacturing / assembly activities.

• Perform other duties as and when assigned/instructed by immediate superior or higher management.

Job Requirements:

• Minimum Qualification: Diploma in Mechanical/Electrical or Marine Engineering Discipline Minimum 1-2 years of experience in Marine, Oil & Gas Industry

• Welding Certificate

• Good understanding of Marine/Offshore industry practices and standards.

• Know-how in one or more of these areas GD&T, NDT, welding, steel fabrication, material casting, and machining technology will be preferred.

• Familiar with ISO 9001 requirements & different marine classification societies' standards and requirements will be an added good knowledge of QMS and ability to implement, conduct checks and audit and upkeeping of documents etc.

• Project Management Skills

• A team player with good interpersonal and communication skills, attention to details, meticulous and independent. Good organizational, multitasking, prioritization, and effective time management skills.

• Ability to think critically and resolve problems/issues. Positive attitude, proactive and self-initiated.

• Ability to multi-task in a fast paced and dynamic environment

• Job Benefits

• · Positive and closely knitted working environment

• · Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• · Annual leaves starting with 14 days and up to 21 days

Working Location:

15 Kwong Min Road S(628718)

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• Work closely with team members (developers, product manager, customer support and partners) to develop, test and deliver high quality products
• Create detailed, comprehensive and well-structured test plans and test cases
• Prevent, report, analyze and track issues in an effective and efficient manner
• Root cause analysis of existing script failures or product issues, propose and drive enhancement for minimizing project issues or risks
• Design, develop and execute automation scripts or implement quality tools to continuously increase efficiency

· Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

· Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.

· Interacting with clients, interpreting their needs and requirements, and representing them in the field.

· Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

· Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

· Reviewing the engineering tasks and initiating the necessary corrective actions.

· Developing specifications for the project's needed equipment.

· Creating frameworks to measure the project's metrics and data collection.

· Establishing field test methods and methods for monitoring the quality of those tests.

· Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

· A Bachelor's degree in engineering or a related field.

· 3 or more years' field and project planning experience.

· Excellent computer literacy and knowledge of design and visualization software.

· The ability to work with multiple discipline projects.

· Excellent project management and supervision skills.

· Excellent organizational, time management, leadership, and decision-making skills.

· Strong written and verbal communication skills.

· Knowledge of applicable codes, policies, standards, and best practices.

Job Description

· To design, develop and implement PLC, HMI, and/or SCADA Application and it's related system, according to technical specification and design practices.

· To prepare technical documentation, wiring diagram, testing procedure

· To conduct field testing & commissioning, where occasional work during engineering hour (night time).

· To provide troubleshooting of control systems on ad-hoc basis.

Job requirements

· Relevant certificate, with at least diploma in any electrical, electronic, mechatronics or equivalent.

· With experience in programming Siemens, Schneider or Allen Bradley PLC, HMI or SCADA.

· Hardware configuration and software coding skills.

· Strong problem-solving and analytical skills

· Customer oriented.

· Good inter-personal communication skills.

· Self motivated with good initiative

Salary: $2600 for first 3 months. After confirmation is $2700

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Key Responsibilities:

• Install GT Power & Distribution Transformers, HT & LV Switchgear, and substation equipment.
• Oversee material planning, cable tray/support installation, and project coordination.
• Lead testing & commissioning of electrical systems.
• Perform quantity surveying and ensure quality assurance/control.
• Manage electrical project timelines and budgets.
• Coordinate with other service providers to ensure smooth site installations

Requirements:

• Minimum 7 years experience in electrical engineering, ideally in the semiconductor industry.
• Proven expertise in electrical system installation and project management.
• Strong skills in material planning, quantity surveying, and quality control.
• Bachelor's degree in Electrical Engineering or related field.

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Identify, propose and evaluate new business opportunities for business growth, with respect to the sale/purchase of refining products including procurement of intermediate components for value-added feedstock/blending entities, and third-party service collaboration.
• Coordinate with internal and external stakeholders to establish operating, commercial and accounting procedures for managing third-party contracts and agreements.
• Oversee day-to-day refinery performance and ensure stakeholders adherence to contractual quantity and obligations. Liaise and collaborate with stakeholders to resolve issues and concerns.
• Work closely with internal stakeholders to support the needs of refinery feedstock demand and supply of products, to achieve optimal refinery operation.

• Degree in Chemical Engineering

• At least 2 years' relevant experience in oil refinery/petrochemical.
• Experience in process/development engineering or commercial work knowledge will be advantageous

SUMMARY:

Responsible for the safe, reliable and cost effective maintenance and repair of the fleet and facilities by effectively planning and managing the workshop resources to maximise efficiency and productivity, in the process ensuring that scheduled work is completed on time and within budget, making due allowance for effectively dealing with the unscheduled work that arises during the course of daily operations. In meeting this prime objective, full compliance with all Company policies and procedures are mandatory with particular reference to health, safety and environmental legislation.

PRINCIPAL RESPONSIBILITIES AND AUTHORITIES:

• Responsible for running and updating the vehicle inspection, servicing and MOT plans on the computerised fleet management system.
• Responsible for allocating the details of the repeat and breakdown defects to the relevant Engineering Supervisor and ensuring that adequate remedial action is taken.
• Responsible for ensuring that all vehicle records are kept up to date and comply with all company policies, procedures and legislation.
• Identify and establish reasons for poor vehicle component performance, formally reporting such incidences to the Fleet Maintenance Manager with the full facts and implications.
• To manage and motivate the engineering team to achieve good standards of performance, level of commitment, awareness and motivation. Identify training and development needs and arrange appropriate training. Encourage staff to share their skills and knowledge.
• To develop and foster a culture of continuous improvement and problem solving amongst the engineering staff. In conjunction with technical personnel, strive for high levels of diagnostic skills to be attained.
• Undertake the delivery of regular tool box talks and team briefings to the engineering workforce documenting all such occasions and the attendees.
• Responsible for planning and controlling the engineering staff holidays and cover arrangements to ensure there are at all times sufficient levels of resource available on all shifts to meet the operational business requirements.
• Responsible for ensuring that adequate numbers of Engineering staff hold and maintain a valid vocational licence, planning for sufficient vocational licence holders to be on duty to provide adequate resource for workshop and on-the-road support throughout the traffic day.
• Develop the relationship between the stores and the workshop to promote cooperation. Arrange for the correct component parts to be available when scheduling vehicles for repair. Review stock levels to ensure they match demand without exceeding budgeted levels of stock holding.
• Monitor the performance of external contractors undertaking vehicle maintenance and repair to ensure quality of work and compliance with vehicle maintenance standards.
• Produce on a timely basis, engineering cost statements for use in third party insurance recoveries ensuring that all labour and material costs are accurately captured and documented.
• Consult with Trade Union Representatives with the objective of maintaining good industrial relations whilst exercising appropriate management leadership.
• Responsible for ensuring personal knowledge is maintained of all the relevant company policies and procedures and that they are adhered to at all times. Additionally, maintain a working knowledge of current legislation that is relevant to the engineering function.
• To provide cover for the Fleet Maintenance Manager, having available suitably trained support from an engineering supervisor to cover Workshop Planner duties.
• Contribute to the effective management of the engineering function on a day to day basis to develop and maintain good relations with the Operations Dept. who are ultimately the customer.
• Making sure of MAR result achieved at high rating.
• Undertake any additional reasonable duties at the request of the Line Manager.
• Undertake any training and development activities at the request of the Line Manager.

SKILLS, EXPERIENCE, CONDITIONS SPECIFICATION:

• Minimum of Diploma in engineering.
• Flexibility of working hours if effective control of the 24/7 engineering function is to be maintained.
• Man management, leadership and organisational skills are important and essential qualities that are relevant to the role.
• Computer literate with a broad knowledge of a range of software products.
• Knowledge of all the legislation relevant and necessary for running a safe and reliable vehicle fleet and engineering workshop.
• Conversant with the requirements that ensure safe and legally compliant operation of all workshop and depot plant and equipment.
• Experienced and competent in the use of computerised fleet and inventory management systems.

Duties:

• Start from the design, development, building and qualifying of various lab instruments, the major focus is in Sample Preparation equipment including our featured FastPrep family (homogenizer).
• Develop and fabricate test equipment in line with test specifications under the direction and guidance of direct supervisor.
• Execute tests using test equipment that measures temperature, electricity, light, flow, pressure, strain, force, distance, time, noise, weight etc.
• Collect and analyze test data/results, document results and outcomes.
• Support the design and fabrication/assembly of both working and visual prototype models. Materials include foam, plastics, and various metals.
• Analyze equipment failures and factory work stoppage problems and provide solutions
• Fabricates, repairs, improves designs of and constructs mechanical and electro-mechanical equipment
• Coordinate with outside calibration vendors effectively
• Maintains detailed and up to date test data in laboratory notebook and active test logs
• Support manufacturing ramp up, and design transfer during product development

Requirement:

• Master's Degree and above in Electrical Engineering or Mechanical Engineering
• 5 years of hands-on Mechanical and Electrical experience.
• Possess broad base of knowledge with understanding and skills in the following areas: Electrical, Fabrication, Tool Making, Machining.
• Must be proficient in the use of machine shop equipment and all hand tools including saws, sanders, drills, grinders, press, brake, shear, lathe, milling machine.
• Able to operate test equipment that measures temperature, electricity, light, flow, pressure, strain, force, distance, time, noise and weight.
• Can work from prints, sketches, written and verbal instructions.
• Reads wiring/electrical and piping schematics and engineering drawings.
• Electrical experience/training in use of and design of AC and DC circuits.
• Piping experience and ability to use electrical test equipment and measuring tools necessary.
• Self-motivated, team player with excellent communication and problem solving skills
• Experience and knowledge of the following areas preferred:

1. Rapid Prototyping
2. Testing and Design Controls
3. Installation
4. Design