· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Roles & Responsibilities

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste

treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the ICA project implementation at site.
• Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.
• Project delivery planning including time and manpower scheduling.
• Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline
• Strong capability of specification capability for all ICA related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• Enforce Specifications, International Standards, Singapore Standards and good practices
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management of ICA discipline for the WtE project
• Review the EICA submittals from Contractors for Process like Waste Reception system,
• Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services,
• Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS,PFMS etc.
• Essential understanding of P&ID of process engineering
• Liase with Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings
• Engage in Technical discussion EICA related issues with contractor and client
• Attend site meetings and resolve technical issues with Contractors
• Define Inspection and Special testing requirement and ensure coordination of those efforts on all contracts
• Ensure the documentation fully complies with the specifications and standards
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation in FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Requirements:

• Degree in Electrical / Electronic/Instrumentation & Control Engineering recognized by the Professional Engineers Board
• Registered as Resident Engineer with the Joint Accreditation Committee of the
• Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 10 years of relevant experience in design and construction of large Waste to
• Energy (WTE) project or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

Job Description

• Design, analysis and plan for security system engineering works
• Liaise with other consultants, contractors, client & authorities from inception to completion of projects
• Responsible for timely submission of design, plans and reports
• Manage projects to meet the time, cost and quality objectives
• Prepare tender specifications and drawings for tendering of construction contracts, including evaluating of tender submissions and make appropriate recommendations to clients
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects

Requirements:

• At least a good degree in Electrical/ Mechanical Engineering or relevant engineering recognized by the Professional Engineers Board
• Proficiency in Engineering software such as AutoCad, BIM etc
• Candidates with experiences in design of integrated electronic security systems (CCTV, access control system, intrusion detection system etc) or experience with a security specialist contractor / integrator would be advantageous
• Candidates with understanding of latest electronic security technologies would be advantageous
• Candidates with experiences in crash protection measures would be advantageous
• Critical thinking skill, good communication skills and the ability to work in a team
• Self-motivated, innovative thinker and willing to take on new challenges
• Candidates with more than 4 years of relevant experience would be considered for Senior Engineer position

Join our dynamic team at Makino Asia, where you'll be at the forefront of cutting-edge technology, driving innovation and excellence in the realm of CNC Milling Machines and Automation.

As a valued member of our Research & Development department, your responsibilities will include:

• Developing New Products and introducing Innovative Designs for our existing Series Products.
• Crafting Customized Machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating pneumatic, hydraulic, servo-electric, and sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

To excel in this role and contribute significantly to our Research & Development team, we seek candidates with the following qualifications:

• Minimum Degree in Mechanical Engineering from a reputable university, demonstrating a solid academic foundation.
• Proven track record of at least 3 years in mechanical design, preferably in a production environment, showcasing your expertise in developing cutting-edge solutions.
• A genuine passion for product design, understanding its pivotal role in driving innovation and bringing forth revolutionary products.
• Unleash your creativity to envision novel and inventive solutions that push the boundaries of what's possible.
• Exceptional analytical skills to tackle complex challenges, delivering reliable and efficient problem-solving.
• Proficiency in industry-standard design tools and software, allowing you to materialize your ideas with precision and finesse.
• Strong teamwork and communication abilities, enabling effective collaboration across multiple departments.
• An enthusiastic learner, always seeking opportunities to stay abreast of the latest trends and advancements in the field of mechanical engineering.

If you are passionate about cutting-edge technology, enjoy creative problem-solving, and thrive in a collaborative environment, this is the ideal opportunity for you to make your mark in the world of advanced manufacturing and automation. We eagerly await your application to join our progressive and innovative team at Makino Asia.

Come be a part of our extraordinary journey at Makino Asia and together, let's shape the future of manufacturing technology!

• Assemble and install mechanical systems for industrial, electromedical, and manufacturing purposes Implement cost-effective changes in equipment design to improve reliability and safety
• Assist mechanical engineers in developing, building and maintaining machines and tools
• Read and interpret engineering designs, plans, and diagrams for piping, transmission, and HVAC systems Prepare cost and material estimates for a project
• Test and analyze machines, tools, and components to determine their performance, strength and response to stress
• Design manufacturing implements such as jigs, dies, and moulds
• Carry out inspections to identify faults and initiate repair of mechanical systems or products
• Monitor mechanical processes to ensure conformance to standard project procedures Use
• CAD software and technology to prepare drawing plans and design for an engineering project
• Assemble components or machine parts to form integral or complete product unit
• Provide technical solutions to mechanical problems found in a variety of industries
• Develop and design prototypes of equipment
• Ensure compliance with health/safety procedures and regulations
• Implement quality control systems useful in evaluating and testing mechanical processes/product for consistency.
• Liase with various departments to completed the job.
• Report to Management Level

Requirements

• Degree in Engineering Mechanical
• Working Location : Jurong West
• Working days : Monday - Friday (5 Days)
• Shift Work required ( Rotation work at Saturday & Sunday)
• Require to work at Night Shift

- To build and design cold storage rooms

- Project engineer is required to serve customers by identifying customer needs and engineering modifications of products, equipment and services.

- Effectively cooperate and communicate with project managers and others to provide assistance and technical support.

- Understand customer service needs and provide technical and engineering information on products, services or equipment.

- Develop and maintain customers, prepare cost estimates, etc.

- Annual leave and sick leave are the same as the Ministry of Labor, bonuses and thirteenth salary depend on company profits

Job Description:

• Gather feedback from stakeholders and finalize product requirement documents with clarity on objectives and execution details.
• Prepare and archive technical documents such as drawings, specifications, test results etc.
• Coordinate with the electrical team for design verification of electromechanical parts.
• Coordinate with the supply chain such as cost analysis discussions.
• Coordinate with quality assurance such as to ensure critical dimensions are met.
• Coordinate with the production team such as correct assembly instructions and storage.

Qualifications:

• Strong written & verbal communication skills in English and Chinese would be favorable.
• 3 years of experience in Mechanical engineering design would be favorable.
• Review, edit, and update drawings and other technical documents for new products.
• Experienced with using FMEA and DFM to evaluate components and systems.
• Experienced working with various mass manufacturing methods such as casting, CNC, laser-cut, bending, and stamping would be favorable.
• Familiarity with EU automotive homologation standards would be favorable.
• Familiarity with quality requirements such as PPAP/ISO 9001/IATF 16949 would be favorable.

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Role Summary/Purpose

Field Service Engineer is a field-based role which requires the incumbent to travel to customer sites across the APAC region to provide specialist installation and maintenance support as directed by his Resource Manager. The role will report to the Resource Manager for SEA region.

Essential Responsibilities

As a Baker Hughes Field Service Engineer you will represent Baker Hughes both technically and professionally to ensure that equipment is installed, maintained and started properly. Your key responsibilities will include:

• Providing on-site technical direction to skilled labor during during Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/AuxiliariesInstallation, Maintenance and Commissioning activities on Customer Owned Sites in remote Shipyards, Oilfields, Industrial Facilities and LNG Plant.
• Experienced in Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/Auxiliariesmaintenance and services inclusive of minor inspections, major inspections, rebuilds, and refurbishment of the equipments.
• Experienced in Installation, Maintenance, Commissioning Site Activities with proper Customer/Company Schedule Targets Mindset following strictly Quality and HSE Rules.
• Utilizing Problem Solving Skills, Engineering Instructions, Drawings, and Process Instructions during Gas Turbines Commissioning and Start-up Activities.
• Possessing the Technical Capability to troubleshoot and provide routine maintenance checkout for Gas Turbines Products.
• Preparation of job-planning documents based to Assignment’s Scope of Work.
• Communicating effectively with Site Manager, Lead FSE, Service / Installation / Project Managers and Site Leaders/Site manager on job planning and execution and with Resource Managers regarding site arrivals, departures and job progression.
• Providing input for Daily, Weekly & Final report for outages and installations projects.
• Preparing timely and accurate technical reports for Customer records and as Reference for future Outages.
• Actively participate to customer and/or contractor meeting and be promoter on their recurrence and following action plan.
• Establish through the immediate Report after the Daily HSE Tool Box Talking (mandatory for Baker Hughes/Contractor personnel) the critical activity tasks and remark any HSE aspect to be followed.
• Have knowledge of all Quality procedures and documentation applicable to specific activities and ensure they are properly followed and updated.
• Ensure that Red Flag Review process for New Units Installation is followed and applied.
• Ensure Site Quality Check List/Job Cards/Field Procedure are followed and properly signed.
• Ensure reports and drawings “marked-up” are completed.
• Ensure all RCA and Lesson Learned are addressed properly.
• Ensure all Non-Conformity (technical and materials) are properly addressed using Baker Hughes e-tools and follow up till resolution.
• Ensure compliance with local/current legislation, requests & requirements present in the site Safety Manual.
• Willing to actively participate in NPI (New product Introduction) training to acquire Multiskilling.

Qualifications/Requirements

• Engineering Degree/High School Technical Diploma or equivalent knowledge or at least five (5) years of work experience.
• Significant work experience, preferably in the Energy or Oil & Gas industry.
• Strong knowledge on Baker Hughes/GE Aeroderivates Gas Turbine/Compressors/Auxiliaries installation & maintenance philosophy.
• Fluent oral and written English.
• Strong customer service orientation and the ability to communicate effectively with a range of stakeholders.
• Proven ability to work efficiently without direct supervision.
• Health, Safety and Environmental mindset and compliance

Job Description

• Oversee project execution during design, construction and testing and commission works for water and wastewater treatment works or process plant engineering and construction works.
• Lead the technical presentation to Client and Consultant
• Coordinate with Client, Consultant, Client Site Technical Representative(s), Subcontractors and Suppliers during project execution.
• Process Mechanical Work Design in water and wastewater treatment plants and pumping station and pipeline.
• Prepare and submit Process Mechanical Technical particular to Consultant/Client and following up on technical submission till its approval/acceptance by Consultant/Client.
• Control and monitor process mechanical work progress with Sub Contractors and suppliers on the mechanical technical documentation and physical work deliverables.
• Assist PM on progressive monthly claim and payment response matters with Sub Contractors and Suppliers.
• Coordinate with Project QS/PM for establishing of contractual scope of mechanical works and its technical requirements and participating in calling of quotation and assists Procurement Team during awarding of Sub Contract/Supply Contract.
• Prepare O&M Manual and As Built drawings for handing over to client.
• Support PM for project schedule or manpower arrangements.

Requirements

• Degree in Mechanical/Chemical/Environmental Engineering。
• Experienced Mechanical Engineer with qualifications recognized by the PEB Singapore.
• At least 15 years of relevant experience in plant construction fields and preferably in Water and Wastewater Industries in Singapore or in Southeast Asia Region.
• Have experience in water and sewerage pumping station including pipe laying works.
• Good knowledge of Design/Coordination and the Code of Practices and its requirements such as American Standard, British Standard and Singapore Standards.
• Good knowledge of relevant software: Microsoft Office (Word and Excel). Knowledge of CAD, BIM, and Project Scheduling will be an added advantage.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• Minimum 5 years of engineering experience with recognized Degree in relevant field, and at least 3 years of supervision experience of E&M work in construction site for projects of similar and complexity.
• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

Role Summary/Purpose

Lead Field Service Engineer is a field-based role which requires the incumbent to travel to customer sites across the APAC region to provide specialist installation and maintenance support as directed by his Resource Manager. The role will report to the Resource Manager for SEA region.

Essential Responsibilities

As a Baker Hughes Lead Field Service Engineer you will represent Baker Hughes both technically and professionally to ensure that equipment is installed, maintained and started properly. Your key responsibilities will include:

• Leading a team of Field Service Engineer of site to provide on-site technical direction to skilled labor during during Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/Auxiliaries Installation, Maintenance and Commissioning activities on Customer Owned Sites in remote Shipyards, Oilfields, Industrial Facilities and LNG Plant.
• Experienced in Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/Auxiliariesmaintenance and services inclusive of minor inspections, major inspections, rebuilds, and refurbishment of the equipments.
• Experienced as site lead/site manager in an Installation, Maintenance, Commissioning Site Activities with proper Customer/Company Schedule Targets Mindset following strictly Quality and HSE Rules.
• Utilizing Problem Solving Skills, Engineering Instructions, Drawings, and Process Instructions during Gas Turbines Commissioning and Start-up Activities.
• Possessing the Technical Capability to troubleshoot and provide routine maintenance checkout for Gas Turbines Products.
• Preparation of job-planning documents based to Assignment’s Scope of Work and be the point of reference on site for all the activity related to Mechanical works on site.
• Communicating effectively with Customer, Site Manager, FSE, Service / Installation / Project Managers on job planning and execution and with Resource Managers regarding site arrivals, departures and job progression.
• Providing input for Daily, Weekly & Final report for outages and installations projects.
• Preparing timely and accurate technical reports for Customer records and as Reference for future Outages.
• Actively participate to customer and/or contractor meeting and be promoter on their recurrence and following action plan.
• Establish through the immediate Report after the Daily HSE Tool Box Talking (mandatory for Baker Hughes/Contractor personnel) the critical activity tasks and remark any HSE aspect to be followed.
• Have knowledge of all Quality procedures and documentation applicable to specific activities and ensure they are properly followed and updated.
• Ensure that Red Flag Review process for New Units Installation is followed and applied.
• Ensure Site Quality Check List/Job Cards/Field Procedure are followed and properly signed.
• Ensure reports and drawings “marked-up” are completed.
• Ensure all RCA and Lesson Learned are addressed properly.
• Ensure all Non-Conformity (technical and materials) are properly addressed using Baker Hughes e-tools and follow up till resolution.
• Ensure compliance with local/current legislation, requests & requirements present in the site Safety Manual.
• Willing to actively participate in NPI (New product Introduction) training to acquire Multiskilling.

Qualifications/Requirements

• Engineering Degree/High School Technical Diploma or equivalent knowledge or at least five (5) years of work experience.
• Significant work experience, preferably in the Energy or Oil & Gas industry.
• Strong knowledge on Baker Hughes/GE Aeroderivates Gas Turbine/Compressors/Auxiliaries installation & maintenance philosophy.
• Fluent oral and written English.
• Strong customer service orientation and the ability to communicate effectively with a range of stakeholders.
• Proven ability to work efficiently without direct supervision.
• Health, Safety and Environmental mindset and compliance

Job Responsibilities:

• Participate new product feasibility study and feature development.
• To designs product according to requirement.
• To support product prototype, build and MP.
• To work with cross functional team members within the organization and customers with different cultures and comfortable to work with virtual team members from remote sites.
• Participate activities in design review.

Job Requirements:

• Mechanical Engineering Degree holder or equivalent degree.
• Knowledge on materials, processes and simulation.
• Good communication skills and good team plater.
• Proficiency with Pro-E design tools or similar.
• Knowledge of international ME test standard such as MIL standard etc.
• Knowledge of Tooling, TA, reliability test.
• Prior experience in mobile, automotive, medical devices is added advantage.
• Experience with product development life cycle and development processes.

Key Roles and Responsibilities

• Be the owner of Product Quality and work closely with Materials Engineers, Customer Quality Engineers, and Quality Systems Engineers to enable CMC Materials to supply Worry-Free products to our customers.
• Lead the team to update and maintain manufacturing documentation (SOP, work instruction, batch card, FMEA, Control Plan, RFC, P&ID) to ensure their accuracy and efficiency. Review documents regularly to ensure their compliance with Safety, Quality and other regulatory requirements.
• Own the Management of Change process for any manufacturing process and equipment changes in the plant.
• Own the root cause investigation for any production, quality and customer issues related to the manufacturing process or equipment. Support Materials Engineering team in root cause finding for issues related to raw materials.
• Develop Preventative Maintenance schedule for all existing process equipment and support Maintenance Team to timely execute the PM program.
• Identify and lead continuous improvement opportunities with a data-based approach, balancing the needs of safety, quality, cost, reliability, and capacity.
• Develop a robust SQC/SPC program balancing process capability and customer requirements. Update process parameter control limits at defined intervals and own the trend reviews to ensure all processes are in control.
• Work with Control System Engineers, lab, and Materials Engineers to ensure data accuracy and availability. Drive a culture of data-based decision making.
• Develop transfer functions between customer performance requirements and internal manufacturing key characteristics. Develop/implement control strategies to ensure consistent performance at customers’ locations.
• Work closely with operation associates, shift supervisors, and operation managers to train and encourage production staff to follow procedures and understand the impact of their actions.
• Optimize production process in terms of defining sampling points & frequency, choosing helpful in-process test protocols, and working closely with the control systems team to define all control schemes.
• Drive Best-Practice sharing/transfer among global manufacturing sites.
• Support all corporate EH&S and Quality initiatives.
• Support capital projects where vital to implement new products or processes

Performs other duties as assigned.

Qualifications and Experience

• B.S. in Chemical Engineering is required. MS or higher in Chemical Engineering is a plus
• 2+ years of experience in a chemical processing environment is required. In-depth knowledge with chemical engineering unit operations: mixing, sophisticated filtration, material handling and distillation is helpful.
• Experience with PSM is a plus.
• Experience with AutoCAD or SAP is a plus.

Skills and Abilities / Core Competencies

• Strong problem-solving and statistical data analysis skills are required.
• Ability to multi-task and attention to detail are must-haves.
• Strong verbal and written communication skills within the company and to customers are required.
• Computer Skills – Proficient with Microsoft applications and statistical software such as JMP, Minitab or SAS.

Candidates with more than 2+ years of experience may be considered for Production Engineer Position.

Solar System Design Engineer

Salary : $3,000 - $4,000

Working hour ： Mon to Fri 9am to 6pm, Sat 9am to 1pm

Location : Potong Pasir

Job Description:

Our client is a leading provider in the renewable energy sector, specializing in solar energy solutions for residential, commercial, and industrial applications.

* Design of solar system include layouts, electrical drawing and others labeling.

* Conduct on-site assessments to evaluate project requirements for solar installations.

* Collaborate with the business development team, providing technical solutions and support on-demand.

* Assist the Project Engineering Manager in preparing method statements, engineering drawings, and developing technical solutions.

Requirements:

* Degree in Electrical or Electronic Engineering.

* Open to candidates without experience if they demonstrate a willingness to learn and grow in the role.

* Proficiency in AutoCAD.

* Ability to read and interpret single-line electrical diagrams.

* Ability to work effectively under pressure and meet project deadlines.

Company Name: Nala Employment Pte Ltd | License No.: 16C8302
Contact Person: Soo Yee Hui
Regisration No.: R24120810

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical & Electronic or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

JOB SUMMARY

Duties include generating PCR and engineering drawing and exploring alternate solution to solve resource or production constrain. He is also responsible to plan, organize and manage assigned project activities. This requires direct interaction with customer, vendors and functional departments to monitor and ascertaining all jobs are progressing within schedule and meeting deadline.

RESPONSIBILITIES & DUTIES

• Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production Supervisor to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Familiar with various laser systems as well as advance welding/cladding technique.
• Experience in robot programming for welding/laser cladding.
• Perform other assignment and duties as and when required.

ACCOUNTABILITIES

• Ensure on time issuance of PCR and drawings and correctness.
• Ensure all projects are on schedule and completed on time.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.

QUALIFICATION & EXPERIENCE

• Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.
• Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

Job Description

· Monitor the machines and company equipments operational performance and condition

· Conduct preventive maintenance to machine and company equipments as per schedule

· Review and update all existing machine maintenance documents

· Prepare and design the spare parts for machines and company equipments

· Report any unsafe conditions and practices to Production Manager

· Assist of production and purchasing department of manufacturing / purchasing spare parts

· Monitor spare parts stock level and raising purchase order

· Involve in the implementation and continuous maintenance of HSE Management System

· Perform any other duties assigned by the Production Manager

Job Requirements

Knowledge of precision machining machineries, equipment and facilities

Knowledge of repair and maintenance on machineries and equipment

Knowledge of Environment, Health & Safety

Diploma in Mechanical, Electrical or Mechatronic Engineering

5 years experience in machine repair and maintenance

Job Descriptions:

* Site coordination, Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Involve in Project planning, electrical & control, instrumentation / sensor, programming, Testing and Commissioning, Service and Maintennace, Documentation and Training

* Experience in AutoCAD drawing or equivalent will be added advantages

* Ad-hoc engineering support when required.

* Willing to work on fast pace environment.

* Willingness for standby duties or work after office hour or during weekend / Public Holiday

Job Requirements:

* Relevant graduate diploma for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance.

* Fresh graduates are welcome.

* Hands on experience in automation system implementation and support.

* Experience in programming, site coordination and support

* Electrical, instrumentations and control knowledge

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

Build a career with confidence

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

Role Responsibilities

• Assist in technical proposal, understand of requirements, perform selection or co-ordinate with factory for technical solution.
• Keep Up-to-Date project status, such as drawing submission, delivery schedule, payment etc.
• Identify and mitigate project risks and liabilities.
• Organize meeting with project stakeholders.
• Actively follow up / liaise with vendors/customer to resolve issue.
• Co-ordinate & follow up with factory for equipment delivery.
• Perform shipment inspection/check, identify any punch if any.
• Attend factory test (local & overseas).
• Participate trade show, exhibition for networking and building customer relationship.

Minimum Requirements

• Min Diploma in Mechanical, or Electrical, Mechatronic, Marine engineering.
• Knowledge in Marine HVAC.
• Familiar with AutoCAD.
• Customer Management & Problem-Solving Skills.
• MS office experience.

Benefits

We are committed to offering competitive benefits programs for all of our employees and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

• Schedule routine servicing and maintenance of heavy machinery and small equipment - using time based intervals and vision link for CAT
• Arrange/Deploy mechanics for daily repair and breakdown of heavy machinery
• Come up with weekly and monthly report on outstanding and completed jobs
• Liaise with workshop store and purchasing to order spare parts to create service kit for servicing?
• Renewal of lifting certificate and ad-hoc workshop duties as assigned by management
• Candidate must possess at least a Diploma / Degree in any field.
• At least 3 years' relevant working experience
• Required skill(s): MS Office, MS Word.
• Applicants must be willing to work in Benoi Crescent.

Who You Are

You are a self-motivated team player with the ability to easily network in an international and cross-cultural environment, working in line with Alfa Laval drivers; Action, Interaction, and Satisfaction. You are driven and see solutions rather than problems, effectively prioritizing and executing tasks. A focus on continuous improvement is in your DNA. You build trust, by clear communication with no prestige.

If the above sounds like you, this position might be just what you’re looking for!

About The Job

Help customers with technical operating issues by carrying out troubleshooting and field service requests submitted through the International Marine Service Desk. The International Service Engineers for Water, Wind & Fuel Systems will provide technical support for the Alfa Laval Boiler System.

Job Description

Follow to all safety procedures and promptly report any unsafe practices or incidents.

• Perform planned service, commissioning, and troubleshooting for Alfa Laval systems on board vessels, including Ballast Water Treatment (PureBallast), High-Speed Separators (HSS), Fuel Conditioning Modules (FCM), Freshwater Generators (FWG), and other equipment.
• Prepare for service jobs by following the Standard Operating Procedures (SOP) to ensure efficient execution.
• Travel domestically and internationally to service jobs on board vessels, with the potential to sail with the vessel if required.
• Execute maintenance, repair, advanced troubleshooting, commissioning or other related services onboard.
• Communicate effectively with customers in English to ensure clear understanding and satisfaction.
• Document all work performed, and conclusions drawn while on board, and ensure that service reports are signed by the customer.
• Identify potential improvements, including sales leads, and provide advice to customers, passing relevant information to the organization.
• Contribute to the development and improvement of Standard Operating Procedures (SOPs).
• Provide formal training to peers and customers, assist in developing of training material and content.
• Proactively seek central support through ServiceNow or direct networking contacts and share findings with the team to keep colleagues informed.
• Be available to respond to emergency service requests, providing timely technical support to minimize vessel downtime.

Main Competencies

Decisiveness & Execution

• Be solution driven and focus on achieving results and ensure that key objectives are met.
• Take responsibility for actions with a ‘can-do’ attitude.
• Influence events actively and make tough decisions when required.
• Identify urgent decisions and make decisions under pressure.
• Take calculated risks on the basis of adequate information and analysis.

Customer focus

• Put the customers first and be eager to please them in line with company standards.
• Go out of the way to ensure that individual customer needs are met.

What You Know

• High school diploma or higher, bachelor’s degree or similar in Marine Engineering a plus.
• 5+ years field service experience on board vessels familiarity with industry regulations and standards, as well as marine mechanical and electrical systems.
• Fluent in English, both verbal and written.
• Good cross-cultural communication skills.
• Experience from working in an international context and across borders with colleagues and customers from other cultures.
• Good reporting skills. (using MS Word and Excel)
• Experience of working in CRM systems and planning tools.
• Understanding of marine separators, ballast treatment systems with electrical, mechanical and automation knowledge.

What’s In It For You

We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval’s future success.