1.Min. 10 years experience in engineering, maintenance and project execution in controls, electrical and instrumentation in Oil & Gas and Petrochemical Industries.Knowledgeable in DCS, SCADA, IPS, PLC, Interlock Logic Diagrams, Instrumentation Loop Drawings, Electrical Drawings, P&IDs.Competent in handling Honeywell (EPKS) Experion PKS (including back-up restore, HMI Web Builder, PAS Plant State Suite Alarm Management System, Corworx Software and Maximo/SAP.

Deliver all assigned C&N activities in a cost-effective, safe and efficient manner through contractors with minimum interruption to operating plant and ensure field work sequences are aligned,

Lead contractors in field activities with high safety standards; ensure all field activities comply with authorities, industrial and company HSE standards and requirements.

Organize and chair risk assessments discussions to ensure hazard are identified and mitigated for all C&N assigned activities.

Collaborate with stakeholders, coordinates reviews and schedule optimizations, resource leveling etc. and prompt updates to the C&N Work Plan.

Provide conceptual ideas for field route piping and produce quality sketches, Check accuracy of approved construction drawing and documentation for execution. Carry out mechanical line and equipment checks, able to coordinate Civil and E&I activities progress, Support Construability reviews for Projects.

Conduct site inspection and explain work requirements to contractors; develop work plan with contractors, operations, maintenance, and other stakeholders for execution with minimum interruption to operating plant and ensure field work sequences are aligned. Able to coordinate with multi-disciplines during field execution.

Drive Contractors management to deliver contractors productivity improvements, contractors’ competency & assurance, including developing relevant work procedures and QA/QC. Accept or reject the quality of work & goods provided by contractors/vendors.

Establish time schedule/execution plan for more complex project with multi-disciplinary involvement amongst operations, maintenance, and contractors. Approval of construction related method statements.

Prepare and deliver weekly works & field progress report. Support computation and calculation of progress measurement, monitor work progress and able to provide schedule catch-up plan. Validate field work quotations and value of work done (VOWD)

Executes the Quality Assurance and Control Plan and Project Specifications. Reviews and approves Inspection Test Plan (ITP) according to Shell HSSE, Technical, and Process Safety Standards, and relevant industry code.

Perform as Permit Requestor (PR) and Authorized Engineer (AE), including for lifting works, as per SJI Permit to Work (PTW) requirement

Organize Mechanical Completion review and assist in operation readiness review for project handing over.

Carry out any other related duties as required, including temporary assignments in other sections within the MTAC department on site.

Educational Qualifications:

· Diploma/ Degree in Mechanical Engineering

Technical Qualifications:

· NACE Coating Inspector Level 2 (Validity Required)

· Qualified MOM OPSOC (Supervisor) or equivalent

· Qualified MOM CSOC (Supervisor) or equivalent

· Qualified MOM Manhole Supervisor

· Qualified MOM Confined Space Safety Assessor

· Qualified MOM Lifting Supervisor and Rigger/Signalman

· Qualified Work at Height Assessor

Professional Experience:

· Minimum 10 years of relevant experience in oil & gas, chemical & petrochemical industry in the below fields.

o Piping/Pipeline Construction, inspection and maintenance

o Tank maintenance

o Application of Protective Coatings (Organic Coatings, Thermal Spray Aluminum)

o Installation and maintenance of Insulation systems.

· Experience in Plant Turnaround Project planning, preparation and execution

· Experience with catalyst change out is a bonus.

Job Description & Requirements

• Responsible to the Principal Engineer, Piping for the preparation of design as per codes / standards and client’s specifications, requisitions for materials, equipment, valves, etc., and for the timely completion of each planned engineering activity assigned to him / her.
• Review of piping specification.
• Review piping stress analysis calculation.
• Review and finalize of piping routing, piping arrangement and support.
• Review design data for missing and / or ambiguities information.
• Reporting project progress to Principal Engineer, Piping on a weekly basis.
• Implementation of Engineering Procedure, drafting Standards and Quality Management.
• Preparation of proposals / estimations for equipment and tankage works.
• Review engineering calculation and technical specifications of storage tanks, pressure vessels and various mechanical equipment.
• Evaluate vendor’s bids and highlight deviations and omissions to purchasing for further clarifications with vendor.
• Perform any other responsibilities as directed by immediate supervisor.

Qualification & Experience generally required

• Bachelor Degree in Engineering.
• Min 8 years relevant working experience in Mechanical engineering in oil and gas sector or offshore sector.
• Know to use spring hanger in stress analysis.
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software.
• Prefer to have at least 5 year of piping engineering related working experience.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

• Provide advanced manufacturing electrical and controls expertise in leading detailed and comprehensive planning for conceptualization, specification, development and implementation of right-sized manufacturing and facility equipment.
• Manage electrical and control portions of capital equipment expenditures that support new product designs, factory capacity or efficiency additions.
• Manage multiple projects and/or provide leadership for larger equipment control projects.
• Must be able to analyse needs and determine best electrical & instrumentations recommendations for equipment / process to optimize cost & performance.
• Able to select the right-sized equipment, workstation design, material presentation, standard work and single piece flow. Use data and statistics to characterize delivered manufacturing process capabilities in qualifying the release of processes and equipment
• Able to design panel (HMI, PLC, RIO) and provide line drawing according to client needs.
• Able to perform IQ/OQ test during commissioning.
• Able to perform costing base on selected instrument or given drawing.
• Automation knowledge.
• Identify and resolve operational problems and minimise delays.
• Select, guide and develop a team of project member with operational responsibilities to ensure that the organisation achieves it business objectives and complies with all relevant regulations and laws.
• Ensure that organisation and government standards on safety are met.
• Ensure that customer quality specifications are constantly met.
• Allocate capital and human resources to maximise productivity.
• Supervise and implement project expense, other assets and resource within budget.
• Provide guidance to junior and perform any tasks or duties as assigned by Management.
• You will oversee the safety and job/project operation.
• Ensure job completed and hand over on schedule.
• You will be attending safety or projects meeting.

Job Summary:

The Process Safety Engineer is responsible for ensuring that all processes within the facility comply with safety regulations and standards. This role involves identifying, evaluating, and mitigating risks associated with hazardous processes to protect personnel, assets, and the environment. The engineer works closely with multidisciplinary teams to implement safety systems, conduct hazard analyses, and ensure compliance with industry best practices and regulatory requirements.

Key Responsibilities:

1. Process Safety Management (PSM):Develop, implement, and maintain the facility’s PSM program in line with local and international standards (e.g., OSHA PSM, API, IEC 61511).
   Perform regular audits and reviews of safety management systems.
   
2. Risk Assessment and Hazard Analysis:Conduct and facilitate risk assessments such as HAZID, HAZOP, LOPA, and SIL assessments.
   Analyze process safety incidents and near misses to identify root causes and corrective actions.
   Implement and maintain risk control measures.
   
3. Safety Design and Systems:Ensure the design and operation of safety-critical equipment meet safety requirements.
   Specify, evaluate, and test safety instrumented systems (SIS) and emergency shutdown systems (ESD).
   Provide input on process design reviews to ensure inherent safety principles are applied.
   
4. Compliance and Standards:Ensure compliance with applicable safety standards, codes, and regulations.
   Prepare and submit required safety documentation and reports to regulatory bodies.
   Liaise with government agencies, certification bodies, and auditors as needed.
   
5. Emergency Response Planning:Support the development of emergency response plans and procedures.
   Conduct process safety drills and training sessions for staff.
   
6. Training and Development:Provide training to operations and maintenance personnel on process safety concepts and best practices.
   Promote a strong safety culture within the organization.
   
7. Incident Investigation:Lead or support investigations into process-related incidents.
   Develop and implement corrective and preventive actions to mitigate future risks.
   
8. Collaboration and Communication:Work closely with operations, maintenance, engineering, and project teams to ensure process safety is integrated into all activities.
   Provide technical guidance on process safety issues.
   

Key Requirements:

Qualifications:

• Bachelor's degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Advanced certifications in process safety (e.g., CCPS Process Safety Professional Certification, NEBOSH Process Safety Management) are a plus.

Experience:

• Minimum 10 years of experience in process safety engineering within the oil and gas industry, ideally with FPSO, refinery, or petrochemical exposure.
• Proven track record of implementing process safety programs and conducting risk assessments.

Technical Skills:

• Strong knowledge of process safety management frameworks and standards (e.g., OSHA PSM, API, IEC 61508/61511).
• Proficiency in process hazard analysis tools such as PHAST, PHA-Pro, or BowTie XP.
• Familiarity with safety design concepts, such as flare systems, relief valves, and blowdown systems.
• Understanding of fire and gas detection systems, ESD, and SIL verification.

Soft Skills:

• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills for cross-functional collaboration.
• Attention to detail and ability to manage multiple priorities effectively.

Preferred:

• Experience working on offshore or FPSO projects.
• Familiarity with environmental regulations and sustainability practices in the oil and gas sector.

Responsibilities

• Work as Senior Tankage Design Engineers to execute the Tankage Design Engineering of

the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650,

Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII &

Cryogenic Double Wall Tanks as per API 620 & API 625.

• Preparation, Review & Checking of Tankage Design Documents such as Design Calculation

for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification,

Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME

Sec VIII, AP 2000 and all Applicable Codes & Standards.

• Prepare all Tankage documents in accordance with project specification. Maintain Design

integrity and quality within the Project Engineering Team

• Preparing Engineering schedule and Engineering man hours estimation to meet project

requirements.

• Coordination with PMC and Construction Coordination.

• Participates in discipline and inter-discipline design check and screening meetings for

compatibility, completeness and correctness in works.

• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

• Preparation of Technical Specification for Works and Technical Bid Evaluation

• Technical assistance to construction activities and attending to Site Queries.

• Preparation of Foundation Loading Data.

• Generate 2D construction drawings and data sheet.

• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system,

aluminium dome roof & etc. Preparing technical bid evaluation for item purchased.

Checking vendor’s calculation & construction drawings.

• Checking of construction drawings. Preparation of bill of material for purchasing.

• Preparation of technical queries to client base on design deviation.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE

in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce

HSE hazards, aspects and risks.

• Any additional Adhoc related work

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Min. 10 years’ experience in oil and gas.

Software Requirements

• Autocad

• Good proficiency in MS Excel , MS word

Code Knowledge

• API 650/ API 620

• ASME Section VIII D1 & D2

• ASME Section II Part A & D

• ASTM

• NFPA

Job Description & Requirements

· Inspecting electrical components during and after the product installation

· The Engineer will ensure clarity and alignment for all team members

• Testing IED NUMERICAL Relays for problems and proposing solutions.
• Familiar in Goose configuration
• IEC61850 Configuration in siemens, ABB, Alstom and Schneider relays.
• Modbus RTU, TCP Communication verification.
• Overall commissioning knowledge in Power system and SAS
• Test equipment such as SFRA, Omicron CPC, CTA, CMC and Transformer testing kits.
• Knowledge in Insulation Oil DGA, BDV.

· Conducts tests and experiments requiring modifications in test setups or procedures subjective judgments in measurement

· Assesses requirements and develops new measurement techniques and approaches related to electrical, electronic and microwave measurement areas

· Establishes test and performance criteria and prescribes calibration approaches, tests, equipment and servicing requirements necessary to ensure measurement traceability

. Must be known of Testing and commissioning Electrical equipment, Switchgear equipment and power transformer. Proficient in testing and commissioning electrical substation, Steel plant and power plant. Set up trouble shooting control and protection circuits like Transformer, Circuit Breaker, CT, PT and switchgear wiring. Sometimes need to work overnight for shutdown maintenance job.

1. Must have Min-7 years experience in testing of CT, PT, relay and transformers

2. Must have knowledge in power system Schematics and SLD`s

3. Must have experience in Testing of GIS panels/ Breakers

4. Coordination with OEM for testing and troubleshooting the equipments.

5. knowledge in Basic configuration and testing of Relays.

6. Experience in handling testing equipment like primary and secondary test sets.

• Perform measurement and calibration using a Coordinate Measuring Machine (CMM)
• Generate and issue final reports
• Liaise with client on technical issues when necessary
• Maintain draft report format/template
• Maintain good housekeeping at workstations/areas
• Assist in the development and extension of new calibration scope
• Increase calibration productivity and efficiency by adopting improved system and methods
• Constantly strive to deliver outstanding services
• Listen to and anticipate the client’s needs and pains to offer the most suitable solution
• Manage timely trouble shooting and assist customers as necessary
• Build and foster collaboration with internal teams involved in service delivery
• At all times, adopt a safe behavior by exercising due regard for the health and safety of SGS employees and clients, in line with SGS policies and procedures
• Perform any other responsibilities assigned by senior management

Requirements:

• Diploma/Degree education in mechanical engineering or related engineering field
• 1~3-year experience in CMM measurement and equipment calibration.
• Technical knowledge and experience in related field
• Able to work independently and to coordinate several activities simultaneously
• Business and profit minded with related technical knowhow
• Competitive and profit-driven; re-invents competitive advantage.
• Able to interact with all levels of management
• Good communication, negotiation and interpersonal skills
• Works well under pressure, challenges status quo
• Applies judgment and acts according to the SGS standards of ethics and integrity

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Provide routine, preventive and corrective maintenance, troubleshooting and overhaul on process equipment such as piping, pressure vessel, pump, compressor, etc.

• Diploma or NITEC in a relevant Engineering discipline
• At least 3 years' relevant experience in an oil refinery/petrochemical plant
• Candidates without relevant experience may be considered for entry-level positions.

Responsibilities:

• Attends and records the daily quality assurance related inspections for mechanical and HVAC installations
• Coordinates with other production departments, clients, and surveyors for Inspection & testing requirements
• Assigns the systems to be tested to the various supervisors and technicians involved in the operation
• Ensures that the Quality work processes to enhance efficiency and productivity
• Reports on non-conformance and issue Improvement notes, where necessary
• Ensures timely completion of project
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Requirements:

• Degree in Marine and Offshore / Mechanical Engineering
• Minimum 5-10 years’ experience with 3 years in marine construction and installations
• Must have ASME PCC-1
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Execute tasks / activities, standard maintenance and repair work such as Preventive, Corrective maintenance project executions at site effectively & efficiently
• Ensure all site executions are performed in accordance with all maintenance work procedures / OEM manuals / Vopak standards to ensure site quality, asset integrity and operability
• Ensure all site executions are performed in accordance with all Local Statutory and Vopak Safety processes to achieve good safety records / results
• Report any problems or issues with site facilities
• Process Permit-to-Work, Job safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute in maintenance documentation review such as Safe Work Procedures (SWP), Job safety Analysis (JSA) and What-If Analysis
• Maintain work progress status and report to Supervisors on daily or adhoc basis
• Perform Work Executor in the Computerized Maintenance Management System (CMMS) workflow to receive, update and close up assigned Work Orders and checklist
• Support Maintenance Supervisor in ensuring that contractors or third party vendors execute maintenance tasks / activities at site effectively and efficiently
• Ensure that contractors carry out tasks/activities that adhered to safety, health and environment regulations and Vopak standards
• Mentor, guide technicians, junior technician in maintenance activities and job competency
• Help out in the supervision of Capex project execution
• Perform equipment or system testing / commissioning / Inspections / Pre-Startup Safety Review (PSSR) to properly handover to the Operations team after maintenance / project completion
• Standby as duty technician for emergency activation to perform corrective maintenance after working hours
• Suggest and execute ideas for continuous improvement in maintenance procedures and processes to improve or optimize maintenance costs, work processes and safety standards
• Assist to lead equipment training to the Operations dept or new trainees
• Practice good housekeeping
• Assist to maintain spare parts inventory levels, support on delivery checks by suppliers and maintain good preservation/housekeeping in the stores
• Only for Maintenance Senior Technicians - to mentor and guide technicians/junior technicians

Requirements:

• 3 years of relevant maintenance experience in similar industry
• ITE or Diploma equivalent in maintenance
• Familiar with and experience in Maintenance and inspection work
• Familiar with and experience in terminal equipment and assets
• Technically sound
• Familiar with terminal equipment and assets
• Familiar with terminal fire-fighting and emergency procedures
• Knowledge of safety, health and environment regulatory and practices
• Compliance with regulatory requirements
• Teamwork
• Mentoring experience is an advantage

We are now seeking Field Service Engineers to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Performing on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation.
• Responding to requests for emergency repairs and services to troubleshoot equipment.
• Providing technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair, and maintenance at customer's sites, developing and further expand technical knowledge and expertise, currently recognized industry standards for engineering ability.
• Maintaining knowledge of applicable product line warranty and accomplish effective warranty administration.
• Planning, preparing and/or instructing both internal and external training programs as required, to impart and perpetuate field engineering and/or product knowledge in area of specialization.
• Providing leadership and technical direction to skilled labor performing work on customer sites.
• Maintaining strong safety mindset to assure the executed work reflects the technical requirements within NOV safety standards
• Preparing timely and accurate technical reports for customer records and a reference for future outages.

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand hydraulic schematics. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

Duties & Responsibilities

• Prepare the equipment list
• Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
• Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries
• Prepare the requisition and RFQ documents for vendor enquiry
• Prepare the technical clarification and technical bid evaluation of vendor proposal
• Review and check the drawings, designs specification, materials and equipment from vendor for conformity with project technical requirements
• To liaise effectively with vendor and inter-departments to resolve engineering technical issue
• To resolve and response to client comment.
• Prepare information drawing for interface design work whenever is necessary
• Prepare bill of material for cost estimation of bid project
• Provide engineering support for the equipment installation and commissioning activities at site
• Provide engineering support for maintenance works.
• To carry out any other duties as and when assigned by the immediate supervisor or principle engineer

Qualification & Experience Generally Required

• Bachelor Degree in Mechanical Engineering or its equivalent
• Min. 1 to 2 years engineering knowledge in mechanical disciplines in Oil & Gas and Petrochemical industries.
• Experienced in equipment engineering specifications and standards
• Familiar with industrial standards and local codes
• Strong communication skills and the ability to stay organised and multi-task
• Proficient in using MS Word, Excel, Autocad

Responsibilities

1. Work effectively with Operations and Maintenance staff from the Lines as well as other engineering departments to investigate defects. To develop methods, propose modifications and improve maintenance strategies to rectify them.

2. Analyze and trend condition monitoring and defect data to identify reliability concerns. To develop methods, propose modifications and improve maintenance strategies to overcome them.

3. Draft technical work instructions for preventive and corrective maintenance activities.

4. Identify and implement cost-effective technologies to enhance the RTS Signaling, Communication & Control System performance.

5. Support LTA and RTSO projects in reviewing project design specifications and ensure their adequacy for the safety, reliability, maintainability and operability. To provide

other engineering support to the projects, as required.

6. Work in STRC Tuas, Singapore

Qualifications & Work Experience

1. Degree in Electrical & Electronics Engineering or equivalent from recognized institution

2. Previous Railway System experience would be advantageous

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Job Description

We are seeking a highly motivated and skilled Development Engineer specializing in ROS 2 to join our dynamic team. The role focuses on developing robotic solutions using ROS 2 and Robotics Middleware Framework (RMF) to drive the adoption of cutting-edge robotics technologies in industrial applications. The ideal candidate will play a pivotal role in bridging research innovations with real-world deployment, contributing to the full software development lifecycle of robotics projects while ensuring seamless integration with industrial systems.

Roles and Responsibilities

1. Software Development:

· Develop, test, and maintain robotics software solutions using ROS 2 and RMF.

· Write clean, efficient, and modular code in C++ and Python.

2. System Integration:

· Design and implement systems for deploying robotic solutions in industrial settings.

· Integrate robotic hardware, sensors, and actuators with ROS 2-based software solutions.

3. Project Execution:

· Plan and execute technical projects, ensuring timely delivery of milestones.

· Collaborate with cross-functional teams to translate research outcomes into deployable solutions.

4. Software Development Lifecycle:

· Contribute to all phases of the software development lifecycle (SDLC), including requirement gathering, design, implementation, testing, and deployment.

· Use version control systems (e.g., Git) effectively to manage and track code changes.

5. Systems Engineering and Technical Planning:

· Conduct systems engineering activities such as requirement analysis, system design, and validation planning.

· Translating business requirements into system requirements and validation methodologies in project planning and proposals

· Create technical documentation, including design documents, user manuals, and test plans.

6. Continuous Improvement:

· Stay updated with advancements in ROS 2, RMF, and robotics technologies.

· Identify opportunities to enhance performance, reliability, and usability of solutions.

Job Requirements

· Qualification & field of study: Bachelor's degree or higher in Robotics, Computer Science, Electrical/Mechanical Engineering, or related fields.

· Min. years of experience: 3-5 years

· Proficiency in C++ and Python programming.

· Experience in developing robotics applications using ROS 2

· Familiarity with Git for version control and collaborative development.

· Knowledge of the Robotics Middleware Framework (RMF) and its ecosystem.

· Familiarity with the software development lifecycle and best practices in software engineering.

· Ability to execute technical project planning and manage deliverables.

· Experience in systems engineering, including system design, requirements definition, and testing methodologies.

· Strong problem-solving skills and a proactive mindset.

· Effective communication and teamwork abilities.

· Adaptability to dynamic project requirements and timelines.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• A1 Main Con
• LTA/Building projects
• 5 working days

Responsibilities:

• Coordinate design drawings with consultants to comply with requirements of the authorities
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress
• Prepare technical submissions for materials, construction methods and C&S shop drawings
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams

Requirement:

• Degree in Civil / Structural Engineering or similar
• 3 years of working experience in the related field
• Experience in LTA projects/building projects

Kindly send your updated resume to"[email protected]"

EA Reg. No: R1880058 | Dylan

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

We are seeking a highly motivated and skilled Development Engineer specializing in ROS 2 to join our dynamic team. The role focuses on developing robotic solutions using ROS 2 and Robotics Middleware Framework (RMF) to drive the adoption of cutting-edge robotics technologies in industrial applications. The ideal candidate will play a pivotal role in bridging research innovations with real-world deployment, contributing to the full software development lifecycle of robotics projects while ensuring seamless integration with industrial systems.

Roles and Responsibilities

1. Software Development:

· Develop, test, and maintain robotics software solutions using ROS 2 and RMF.

· Write clean, efficient, and modular code in C++ and Python.

2. System Integration:

· Design and implement systems for deploying robotic solutions in industrial settings.

· Integrate robotic hardware, sensors, and actuators with ROS 2-based software solutions.

3. Project Execution:

· Plan and execute technical projects, ensuring timely delivery of milestones.

· Collaborate with cross-functional teams to translate research outcomes into deployable solutions.

4. Software Development Lifecycle:

· Contribute to all phases of the software development lifecycle (SDLC), including requirement gathering, design, implementation, testing, and deployment.

· Use version control systems (e.g., Git) effectively to manage and track code changes.

5. Systems Engineering and Technical Planning:

· Conduct systems engineering activities such as requirement analysis, system design, and validation planning.

· Translating business requirements into system requirements and validation methodologies in project planning and proposals

· Create technical documentation, including design documents, user manuals, and test plans.

6. Continuous Improvement:

· Stay updated with advancements in ROS 2, RMF, and robotics technologies.

· Identify opportunities to enhance performance, reliability, and usability of solutions.

Job Requirements

· Qualification & field of study: Bachelor's degree or higher in Robotics, Computer Science, Electrical/Mechanical Engineering, or related fields.

· Min. years of experience: 5 years

· Proficiency in C++ and Python programming.

· Experience in developing robotics applications using ROS 2

· Familiarity with Git for version control and collaborative development.

· Knowledge of the Robotics Middleware Framework (RMF) and its ecosystem.

· Familiarity with the software development lifecycle and best practices in software engineering.

· Ability to execute technical project planning and manage deliverables.

· Experience in systems engineering, including system design, requirements definition, and testing methodologies.

· Strong problem-solving skills and a proactive mindset.

· Effective communication and teamwork abilities.

· Adaptability to dynamic project requirements and timelines.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628