Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

This position focuses on strategy and modeling creation, improving global standardizations, enable sustainability through automation, synchronizing the processes and scaling the solutions to transform the inline interdiction and operation system automation for RAM Quality and Operation Engineering sections.

Responsibilities:

• Establish and improve BKM (Best Known Method) for RAM quality defense line, sampling methodology, sampling systems and operation efficiency.
• Improve quality and yield performance by reducing defect OOC% variation.
• Keen to learn new skills, initiate proactive and continuous improvement projects, in areas across the Front-End including manufacturing methods and processes, quality, software systems, cycle time, key tool metrics (utilization, and performance efficiency), maintenance and routine tasks, and other manufacturing support operation.
• Establish metrics that can efficiently audit adoption rate and compliance to business process, BKM and strategy and perform audits.
• Perform quality deviation investigations, fab metrics benchmarking analysis and find opportunity for improvements.
• Lead and facilitate discussion to drive network alignment on strategy business process and roadmap to achieve area objectives and deliver to timelines/commitments. Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.
• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.
• Provide tactical support and coordination for the Fabs for issues of People, Safety, Yield, Quality, Cost, and Cycle Time when required.

Qualifications & Skills:

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management and present strategy and updates to network members and leaders.
• Proficient in project management with good resource planning, status monitoring and deliver timely results.
• Promote worldwide sharing and transfer of area-specific knowledge.
• Proficiency, experience, and knowledge relating to product and test wafer capacity modeling, wafer at risk modeling, Failure Mode Effect Analysis (FMEA) concept and system, defect analysis tools, sampling strategy and systems, Statistical Process Control (SPC) tools, Cycle Time Management, tableau creation, SQL and Programming language and Organizational Change have advantage.

Education and Experience:

• Masters/bachelor’s in engineering
• Relevant working experiences in RDA and/or Metrology
• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Jobscope

• Install and configure gas detection systems at customer sites.
• Assess and determine the best locations for sensors.
• Regularly maintain and calibrate gas detection equipment to ensure accuracy.
• Perform preventive maintenance to avoid equipment breakdowns.
• Diagnose and fix issues with gas detection systems, including hardware and sensor problems.
• Repair or replace faulty components.
• Provide on-site and remote support to customers for system issues.
• Train customers on the correct use and maintenance of equipment.
• Other ad hoc duties assigned by supervisor

Requirements

• Min. Diploma in Electrical/ Electronic/ Process Instrumentation / Mechatronics Engineering
• Experience in oil & gas or process industries as training will be provided
• Min 3 years’ experience in service/engineering position in Oil & Gas / Process industry.
• Knowledge in Electrical & instrumentation is preferred
• Possess a valid class 3 license

Interested candidates, do submit your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]@recruitexpress.com.sg

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Package Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Handle customer inquiries and technical issues via phone, email, chat, or ticketing system to provide quick and polite assistance.
• Solve technical problems reported by customers or users using troubleshooting skills for software, hardware, or network issues.
• Work with development and product teams to resolve complex issues and keep stakeholders updated.
• Meet SLAs for response times and resolutions, ensuring requests are handled on time.

Requirements:

• Diploma in Cyber Security or equivalent.
• At least 2 years of relevant working experience.
• Good knowledge of computer systems, networks, troubleshooting, and key protocols like TCP/IP and DNS.
• Comfortable to work 24x7 standby shifts.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

ByteDance will be prioritizing applicants who have a current right to work in Singapore, and do not require ByteDance's sponsorship of a visa.

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok and Helo as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible.

Together, we inspire creativity and enrich life - a mission we aim towards achieving every day.

To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve.

Join us.

About The Team

Site Reliability Engineering (SRE) of Applied Machine Learning (AML) team combines system engineering and the art of machine learning to develop and run massively distributed recommendation system around the world.

On the SRE team, you'll have the opportunity to sharpen your expertise in coding, performance analysis and large system operation, and get heavily involved in the process of hardware/capacity decision-making.

SRE ensures that the very centric machine learning services at ByteDance have the highest level of availability, as well as creating highly automated systems and pipelines.

Responsibilities

- Research, design, and develop computer and network software or specialised utility programs.

- Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.

- Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

- Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.

- Research, design, and develop computer and network software or specialised utility programs.

- Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.

- Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

- Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.

Qualifications

Minimum Qualifications

- Bachelor’s degree in Computer Science or equivalent with 3+ years of relevant experience

- Proven experience in analyzing and troubleshooting distributed systems.

- Prior experience designing and maintaining large-scale systems.

- Experience programming in at least one of the following languages: Python or C/C++.

Preferred Qualifications

- Ability to thrive in a fast-paced environment.

- Strong understanding of code optimizing and routine tasks automation.

- Proficiency in at least one machine learning framework: TensorFlow, PyTorch, MXNet or PaddlePaddle.

- Solid background of algorithms and data structures.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year to 2 years of relevant experience
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Must have previous experience working in plastic moulding company handling new project:

· Receive tooling drawing from customers, arrange tooling fabrication with tool maker.

· sample production and customers' approval for the sample parts.

· engineering change and tooling modification etc until the mass production of the parts.

· Good Pay + Good allowance + Good Bonus

·

· Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

·

· Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsible for tooling drawings, specification filing and maintenance. Manage projects, ensure all tooling are executed smoothly and efficiently against an agreed plan. Perform evaluation and development activities to provide solutions for technical problems to sustain and improved production yield, quality, process cycle-time and cost reduction.

Requirements:

· Degree / Diploma in Engineering or its equivalent with minimum 3 years' experience in plastic injection molding environment.

- 5 days work week

- Working hours - 8.15am to 5.30pm

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

To manage and execute EMS/DMS SCADA projects and service contracts

Carry out routine and corrective maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements

Ensure smooth and proper execution of projects/contracts

Requirements:

Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognised Polytechnic/University

Preferably have some working experiences in executing /maintaining of SCADA and Substation Automation System.

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Position Summary

The Senior Staff Mechanical Engineer will be part of Vivance organization, reporting to the R&D Director in Singapore. He will contribute towards ME Engineering activities throughout the Product Development cycle of the Vivance Products.

Responsibilities

• Perform mechanical engineering activities to develop new Products from concept to production
• Perform engineering activities required for support of released products for product development, quality improvement, COGS reduction, and manufacturing issues resolution.
• Work with other simulation/electronic/mechanical engineers to ensure product performance, reliability and cost expectations are met.
• Lead projects related to cost, quality, design, and productivity using methodology such as Tolerance Stack, Process Capability (Cpk), FMEA, Minitab, etc.
• Operate within a project team and assume responsibility to design, develop and verify new products from concept through to production.
• Participate in the preparation and review of system documentation including System Specifications, Regression Analyses, Risk Analyses, Regulatory Submissions
• Testing, verification, and validation of products and alterations to ensure they meet the necessary requirements and specifications
• Identify gaps in design proposals, technical capabilities/techniques, and supports the development of strategies to overcome them through DFM & DFS practices.
• Conduct technical design reviews at system or subsystem levels in projects.
• Work within medical regulatory requirements (FDA, ISO, IEC)

Education Requirements

• Bachelors in Mechanical Engineering

Skills / Experience

• Around 7-12 years of experiences in Medical Devices or Related field
• Good Project Management Skills
• Ability to adopt Risk based project execution
• Effective communicate skills
• Proactive attitude with a strong passion for product commercialization.
• Team Player, Strategic with go-getter attitude
• Responsible and able to work under pressure
• Ability to negotiate and sustain networking relationships
• Strong interpersonal, motivating and influencing skills for interacting with team members, business partners, suppliers and management.

Salary: (Junior, 2-4 yrs related experience: up to 4,000)

Time : Mon - Fri: 8.30am – 5.30pm

Location :Woodlands

JOB SCOPE (Design Engineer)

- Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

- Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

- Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

- Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

- Minimum ITE, Diploma or Degree in Mechanical Engineering

- Minimum two years’ experience in customized Automation Machine Design.

- Experience in customized semi-con/ connector/ machine design preferred.

- Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

- Intuitive in mechanical movement, function and performance, good perception of 2D & 3D objects.

Probation period - (3 to 6 months)

Annual Wage Scheme - (Basic annual + 13th month ++)

Performance Bonus - (Depending on Sales and Nett profit)

EA License No.: 96C4864

Reg.No.: R24124620

Mechanical Engineer (ACMV)

The Role:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team

Benefits:

• Monday to Friday; 8.30am - 5.30pm
• Working Location: Commonwealth
• Basic + Allowances, $4500 - $5000
• Up to 3 months Bonus

Requirements:

• At least 5 years relevant experience in ACMV industry
• Knowledge in BIM would be advantageous

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

For FAST response, whatsapp to 6038 0508, with the following information:

1) Your Name
2) Your staying location
3) Your availability to start work

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Sng Shoo Woon

Registration Number: R1110625
AlwaysHired Pte Ltd
EA Licence No: 24C2293

Responsible for tooling drawings, specification filing and maintenance. Manage projects, ensure all tooling are executed smoothly and efficiently against an agreed plan. Perform evaluation and development activities to provide solutions for technical problems to sustain and improved production yield, quality, process cycle-time and cost reduction.

Requirements:

· Degree / Diploma in Engineering or its equivalent with minimum 3 years' experience in plastic injection molding environment.

- 5 days work week

- Working hours - 8.15am to 5.30pm

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, co-ordination and execution of LTA and SMRT projects

To attend all interface and co-ordination meetings with different stakeholders and contractors

Installation, monitoring, supervision, testing and troubleshooting of RTU at site

Preparation of project documents and drawings

Requirements:

Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + Up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Manage the Supervisory control and data acquisition (SCADA) system and distribution management systems applications;

Involved in enhancement of the software functionality and troubleshooting to maintain system reliability and performance;

Maintain accurate records of maintenance activities, enhancements and fixes;

Collaborate and communicate with both internal and external customers to ensure smooth execution of projects and provide timely updates on project status;

Assist client for Annual Vulnerability Assessment and Penetration (VAPT) activity and follow up on the findings;

Follow up with product supplier and vendors, test and install the system patching when necessary;

Other ad-hoc duties as assigned.

Requirements:

Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognized Polytechnic/University;

Knowledge in programming languages such as C, C++ and Java;

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus up to 6 Month depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsibilities:

· Project implementation

· Server installation and maintenance support

· MS Azure network configuration

· Back-up software and infrastructure support

Requirements:

· Diploma / Degree in Computer Science / IT Professional Certifications

· 1 to 3 years of experience

· Good interpersonal skills

Please include in the CV

· Last drawn

· Expected salary

· Notice period

Interested candidates, please submit your CV to [email protected]

EA License No: 06C4642

EA Reg No: R1110624

All applications will be treated in strictest confidence and only short-listed candidates will be notified

Senior IT Support Executive

• Working hours: 8.30am to 6.00pm (Mon – Fri)
• Office location: Pandan Road [Company transport is provided from Clementi MRT (one way) ]
• Salary: $3500 – 4500

Responsibilities:

• Administer and configure infrastructure systems and applications (e.g. Active Directory Services, Data Centre, video conferencing, audio system, telephony, server storage, backup, etc.), network devices (Firewall, routers, VPN, internet proxy, wireless, etc.), desktop, mobile devices and other remote devices.
• Ensure systems are backed up automatically, recovery plans and disaster recovery plans and patches are carried out successfully and monitor the systems’ resources usage closely.
• Liaise with external vendors to ensure Service Level Agreements (SLA) are met.
• Draft and update technical documentation such as administration & user guides.
• Provide technical support to both Local and Overseas branches’ users over the LAN and WAN without compromising security.
• Source for products/solutions and vendors/suppliers for required projects.
• Provide L1/L2 support and participate as a team lead or member in projects.

Requirements:

• Diploma or Degree in Computer Science, Information Technology, OR/AND Certification in CCNA
• Minimum of one year of relevant experience
• Proficient in enterprise networking, including WAN, LAN, and VPN optimization implementation and support
• Skilled in administering Microsoft Server 2012 and later, Microsoft 365, and Google Suite products/services
• Familiar with internet architecture designs such as TCP/IP, DNS, DHCP, Proxy and Firewall
• Familiar with devices like Alcatel PABX, FortiGate Devices, Cisco and Unifi Wireless AP Controller
• Strong knowledge of CyberRisk and CyberSecurity; familiarity with PDPA is highly preferred
• Experience with Veeam, VMware, and UNIX/Linux is an added advantage
• Experience in API/Web Programming and Database Administration is an added advantage

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

Marine Senior Service Engineer | Up to $5k | 5 Days | Boon Lay

• Working Location: Jurong Pier Road - Boon Lay
• Working Days: Monday – Friday
• Working Hours: 8:30am - 5:15pm
• Salary range: SGD 3,700 to SGD 5,000 monthly, 13th month, SGD 250 transport allowance

Specific Responsibilities

• Standby support and 24/7 emergency call for customer support.
• Providing after-sales technical support, site recovery and maintenance responsibilities to distributors/end customers.
• Provide the installation, commissioning and on-site training to support the customers according to the scope of the project.
• Generate a service report to customer in a systematic manner.
• Investigate and handle all customers’ complaints related to product failures.
• Investigates root causes of failures and recommend solutions.
• Review and assist in determining the extend of damage and repairs of warranty claims from distributors.
• Maintain close working relationship with our key customers to ensure the follow through until the issue is resolved.
• Develop service training material, ensures all technical and training documents are up-to-date and organized.
• Provides specific training to distributors and dealers for service and troubleshooting skillsets, ensuring optimum service level at all distributors.

Qualifications / Requirements

• Diploma/degree in Electrical/Mechanical Engineering with at least 5 years of relevant experience
• This position requires fair amount of traveling in the Asia Pacific and Southeast Asia Region
• Possess strong customer service orientation, enthusiasm for power generation products, electrical and control system
• Candidates with equivalent professional background will be considered
• Prior electrical and control experience with various control system (John Deere ECU and KDI ECU) and synchronization system will be advantageous

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

• MNC Company
• Basic $5000 - $6000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF

Job Responsibilities:

• Interpret applicable Legal, Singapore Standards, Code of Practice & other requirements and implement & provide directions for compliance.
• Develop, maintain and periodically test out emergency response, Organize & conduct CERT audit and other emergency response relevant drills.
• Liaise with local authorities for all EHS issues, Licence renewal and represent the RC/SICA and other relevant meetings.
• Manage all EHS incident and non-conformance investigations and track corrective and preventive actions to closure.
• Organize risk assessments, site inspections and industrial hygiene and environmental samplings as well as implement or direct risk reduction and control measures.
• Conduct and organize EHS audits, trainings, meetings and promotional programs to increase employee awareness and knowledge.
• Establishing EHS objectives & Targets and its management Programme for continual improvement.
• Contractor management on In-house & SDM (Shutdown Maintenance) activities.
• Should have strong awareness on Safety Case implementation as well as Mitigative Measures for Safety Critical Events (SCE) in Major Hazard Industries (MHI).
• Establish good communication with all level and function within the organization.
• Assist in the adhoc assignment or project assign by management.
• Spearhead continual improvement projects for HSE.
• Work with HSE department in organizing Annual Safety Campaign.
• Liaise with local authorities for all EHS issues, License renewal and represent the RC/SICA/SORT and other relevant meetings.
• Other ad-hoc duties as assigned.

Requirements:

• Min Diploma in Chemical Engineering
• At least five years of primary experience handling safety responsibilities within HSE department
• At least 3 years of working experience in the oil or petrochemical industry. Preferably experienced in Jurong Island
• Must be a Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF
• Good command of English (spoken and written)
• Experience with ISO14001/ SS651(ISO45001) management systems

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $5000 - $6000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF

Job Responsibilities:

• Interpret applicable Legal, Singapore Standards, Code of Practice & other requirements and implement & provide directions for compliance.
• Develop, maintain and periodically test out emergency response, Organize & conduct CERT audit and other emergency response relevant drills.
• Liaise with local authorities for all EHS issues, Licence renewal and represent the RC/SICA and other relevant meetings.
• Manage all EHS incident and non-conformance investigations and track corrective and preventive actions to closure.
• Organize risk assessments, site inspections and industrial hygiene and environmental samplings as well as implement or direct risk reduction and control measures.
• Conduct and organize EHS audits, trainings, meetings and promotional programs to increase employee awareness and knowledge.
• Establishing EHS objectives & Targets and its management Programme for continual improvement.
• Contractor management on In-house & SDM (Shutdown Maintenance) activities.
• Should have strong awareness on Safety Case implementation as well as Mitigative Measures for Safety Critical Events (SCE) in Major Hazard Industries (MHI).
• Establish good communication with all level and function within the organization.
• Assist in the adhoc assignment or project assign by management.
• Spearhead continual improvement projects for HSE.
• Work with HSE department in organizing Annual Safety Campaign.
• Liaise with local authorities for all EHS issues, License renewal and represent the RC/SICA/SORT and other relevant meetings.
• Other ad-hoc duties as assigned.

Requirements:

• Min Diploma in Chemical Engineering
• At least five years of primary experience handling safety responsibilities within HSE department
• At least 3 years of working experience in the oil or petrochemical industry. Preferably experienced in Jurong Island
• Must be a Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF
• Good command of English (spoken and written)
• Experience with ISO14001/ SS651(ISO45001) management systems

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Good Bonus - AWS + Up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Manage the Supervisory control and data acquisition (SCADA) system and distribution management systems applications;

Involved in enhancement of the software functionality and troubleshooting to maintain system reliability and performance;

Maintain accurate records of maintenance activities, enhancements and fixes;

Collaborate and communicate with both internal and external customers to ensure smooth execution of projects and provide timely updates on project status;

Assist client for Annual Vulnerability Assessment and Penetration (VAPT) activity and follow up on the findings;

Follow up with product supplier and vendors, test and install the system patching when necessary;

Other ad-hoc duties as assigned.

Requirements:

Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognized Polytechnic/University;

Knowledge in programming languages such as C, C++ and Java;

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus up to 6 Month depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsibilities:

• Perform assembly, fitting, and basic tool room machining tasks for mould development and process improvement in tool manufacturing.
• Collaborate with machining technicians for process planning and project scheduling.
• Review tooling designs with the Designer to ensure alignment with customer requirements.
• Assemble, fit, and troubleshoot tooling-related issues.
• Fabricate tooling components and inserts according to design specifications.
• Coordinate with Production Engineers to plan and execute mould testing.
• Ensure tooling manufacturing and trials adhere to the planned schedule.
• Implement corrective actions for first articles or parts that fail to meet specifications.
• Operate and maintain precision measuring tools, such as micrometers, calipers, optical measuring machines, and gauges.
• Maintain tool room facilities, ensuring proper usage and adherence to health and safety standards.
• Contribute to Continuous Improvement Projects.
• Undertake additional tasks as assigned by the Manager or Supervisor.

REQUIREMENTS:

• Minimum 5 years of experience in a mould manufacturing toolroom environment.
• ITE or Nitec certification in Tool & Die Trade.