We are looking for candidates that are looking for IT job.

Job scope as follow for the candidate:

• Provide technical support to ensure the smooth operation of PCs / NB/ Servers/Network switch/Router/Firewall/ printer through regular maintenance & housekeeping.
• Job also include diagnosing and resolving of hardware and software problems, installing software and new applications as well as providing advice and assistance to users.
• Cabling job

Willing to learn & responsible

Job duties:

• Dealing with commissioning of complete UPS and rectifier systems including batteries from Lead acid.
• Testing newly built UPS and rectifiers according to client specification and requirements and conducts Factory Acceptance Test.
• Carrying out contract maintenance and inspection on a plan base on manufacturers’ recommendations.
• With all planning of maintenance service administration undertaken within suitable instructions.
• Submitting required reports to service administration in a timely manner following all site activities.
• Ensuring team efforts are met and exceeded performance targets and reliability goals including being prepared to travel overseas on business trip within short notice and work irregular hours at times to meet ad-hoc job assignments.
• Providing comprehensive facility, critical environment management and technical services to the client, with a focus on continuous improvement.
• Ensuring all safety procedures, including Crisis Management/ Business Continuity and Emergency Procedures are maintained at all times to ensure that service delivery teams and on-site contractors undergo a Health and Safety Induction prior to deployment.
• Multinational corporation
• Salary up to $5000 + Various Benefits & Allowances

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Responsibilities

• Diagnose and troubleshoot issues with marine engines, auxiliary systems, and other vessel components.
• Perform repairs on inboard/outboard engines, including fuel, cooling, and exhaust systems.
• Conduct routine maintenance to ensure shipboard systems are in good working order.
• Maintain cleanliness in ship and engine rooms when onboard.
• Provide detailed reports on repairs and explain services performed to customers.
• Adhere to safety protocols and ensure compliance with environmental regulations.
• Maintain accurate service records, including parts used and time spent.
• Collaborate with other technicians and assist in mentoring junior staff.

Requirements:

• Diploma or technical certification in marine mechanics or a related field.
• Minimum 2 years of experience in marine service and repair.
• Strong mechanical skills, with knowledge of marine engines and cargo pumps.
• Proficient with diagnostic tools and service equipment.
• Ability to interpret technical manuals and handle physically demanding tasks.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L3V5938V

Job Description:

• Experience in data center deployments and building large-scale infrastructure.
• Strong knowledge of network routing and switching concepts and protocols, including BGP, TCP/IP, VLAN, ISIS, OSPF, and MPLS.
• Proficiency in performing basic tasks using the Linux/Unix command line interface.
• Proven ability to analyze complex situations and apply troubleshooting skills, systems, tools, and creative problem-solving abilities under pressure.
• Preferred experience with Service Provider network hardware platforms and architectures, including routers, switches, and data center switching platforms.
• Prior experience with field-based work in data centers.

Education:

Bachelor’s in computer science, Computer Engineering or equivalent/higher

Language:

Fluent written and spoken English

Job Description

1. Establish action plan for all sales promotions
2. Drive sales growth through maximization of resources and execution of market segment strategies
3. Secure active customer relation data management within the assigned area
4. Establish / Maintain campaign results report to track progress and impact of marketing initatives and take appropriate actions in case of deviation
5. Achieve sales target set by management in assigned area
6. Assist ASM in supporting channel partners technically
7. Provide market and competitor intelligence on monthly base
8. Monitor customer, competitor activity and gather general market information and feedback to headquarter.
9. Create and maintain strong customer relationship with top notch customer service.

Requirements

• Diploma/Degree in Mechanical / Electronics Engineering
• Minimum 5 years of sales experience in multi-national industrial environment, preferably with wire processing machines, and more than 3 years in sales management
• Good basic understanding in industrial machinery, automation and software
• Excellent communication, presentation, and negotiation skills
• Ability to work independently and as part of a team
• Willingness to travel overseas (up to 30% of time)
• Singaporeans only

Get to Know the Team

When you’re an engineer at Grab, you'll help shape the heart and soul of the company. Our team's mission is to create amazing services and tools that impact hundreds of millions of consumers, driving partners, and fellow Grabbers every day.

The applications we develop are core to our business. Your contributions will touch millions of lives, and you'll be recognised when you exceed our high expectations. You'll work in an international team of experienced developers who prioritise quality and new ideas. In our agile, test-driven development environment, you'll not only build new features and platforms but also evaluate the latest in mobile technology.

We're constantly improving our food delivery and supermarket platforms, handling tens of millions of bookings daily. New code reaches hundreds of millions of users quickly. You'll enhance features for our consumer and delivery-partner facing app, focusing on Deliveries, but we'll always welcome your fresh ideas. You'll work on one of the largest codebases in Southeast Asia, making an impact.

Get to Know the Role

We are looking for individuals with experience working within distributed environments to join our big data engineering group. You will report to the Senior Engineering Manager and be based onsite in Singapore. You will automate multiple big data flows, performance engineering, and building the internal big data pipeline platform to maintain the quality of our critical data. We offer the opportunity to work with a world-class engineering team managing petabytes of data in Southeast Asia.

The Critical Tasks You Will Perform

• Design the data warehouse schema in Bigquery and also be able to write code to process data from heterogeneous sources like APIs, PubSub, Transactional Databases.
• Lead, design, develop and manage data pipelines on the data ecosystem.
• Be hands on development in designing and developing ETL/ELT processes to ingest data into the data warehouse with focus on data quality and profiling.
• Participate in collaborations in external and team members and build SLAs.
• Take ownership of not just the Data Platform but also building the right
• Practise to lead the way forward for the team.
• Collaborate across teams and translate the requirements into actual workable
• Technical solutions.
• Ensure data quality and governance and participate in code reviews with focus on high quality technical documentation.

Qualifications

What Essential Skills You Will Need

• Bachelors/Masters in mathematics, computer science or other related quantitative discipline.
• 5+ years experience in data engineering roles.
• Familiarity with Hadoop, Hive, HBase, Spark, Flink, Airflow, Kafka, and Cloud software such as
• Redshift, EMR, BigQuery, Dataflow, Cloud Composer, BigTable, PubSub etc.
• Exposure to big data solutions from various data sources such as AWS, GCP, Microsoft Azure, Alibaba Cloud.
• Familiar with CI/CD and automating the deployments from dev to staging to production
• platforms.
• Experience with Data Warehouse concepts - Fact/Dimension Tables, CDC, SCD,
• partitioning and bucketing strategies.
• Proficient in writing complex SQLs, and experience in at least anyone of Java/Python/Golang.
• Experience in Metadata management, data discovery and creating data lineages.
• High personal code/development standards (peer testing, unit testing, documentation, etc).

WHO WE ARE:

Build. Scale. Sustain.

PALO IT is a global technology consultancy that crafts tech as a force for good. We design, develop and scale digital and sustainable products and services to unlock value across the triple bottom line: people, planet, profit. We do the right thing, and we do it right. We're proud to be a World Economic Forum New Champion, and a B Corp-certified company.

• We are small enough to care locally, big enough to deliver globally (5 continents, 18 offices, +650 experts from +50 nationalities)
• We are robust and resilient (100% independent and 0 debt)
• We are entrepreneurs and passionate experts: We invest in what we believe genuinely and work as a collective intelligence
• We are positive, courageous, caring, doers and committed to excellence

YOUR ROLE:

The Lead/Senior DevOps Engineer will maintain and support an on-premises cloud infrastructure and apply DevOps practices and solutions. The person will also implement cloud-related and DevOps technologies such as AWS/Puppet/Chef/Elk/Azure/Openstack. Senior DevOps Engineer will be expected to conduct workshops with client to identify their challenges, come up with transformation roadmap and deliver technical solutions while coaching delivery teams on DevOps best practices.

YOUR RESPONSIBILITIES:

• Provide customers with reliable solutions
• Configure, maintain, and support the infrastructure both cloud and on-premises.
• Install, maintain, and support the various CI/CD, security and testing related tools
• Create multi-stage CI/CD pipelines to enable faster and frequent releases to production; help delivery teams automate their build and deployment to public cloud
• In some cases, act as a system administrator on different operating systems
• Document, and share knowledge on developed DevSecOps solutions

WHO YOU ARE:

• Strong Unix / Linux / Bash knowledge
• Deep understanding of cloud computing, e.g. technologies, deployment, costing, HA/DR, etc
• You should be able to coach delivery teams on DevOps principles, e.g. CI/CD, test automation, release automation etc. and engineering practices, e.g. TDD, BDD
• Well versed with at least one of the public, private or hybrid cloud platforms such as Openstack, VMWare, OpenShift, AWS, Azure or Google Cloud (GCP)
• Hands-on experience with automation and infrastructure-as-code using various tools including but not limited to Terraform, Pulumi, etc
• Experience with developing and implementing processes to handle releases from development to operations while respecting internal rules, and offering solutions for rollback etc
• You have a good understanding of microservice and event-driven architectures and DevSecOps practices which support relatively complex distributed systems
• Strong RDBMS and NoSQL skill in deploying and fine-tuning such as MySQL, Oracle, Elasticsearch.
• Good understanding of monitoring and hands-on experience of setting up and configuring monitoring tools (e.g. ELK, Prometheus, Grafana and Splunk)
• Overall, 3 - 8 years of experience in platform automation, applying various DevOps principles
• At least 4 years of experience in people management and past experience mentoring engineers

MORE ABOUT PALO IT:

We’re eager to adapt to change, learn from our experiences and move to meet our planet’s urgent needs. We are continuously taking action to:

• Become a climate net-zero company
• Attain 50% of revenue from projects with a positive impact
• Train 100% of our workforce on impact
• Achieve B Corp certification among all our offices across the globe
• Continuously measure & improve employee happiness

Our clients are amongst the world's most successful companies. We innovate with both established Fortune 1000s, SMEs and start-ups who aim to make an impact, become global leaders and address the world's most complex challenges.

What We Offer

• Stimulating working environments
• Unique career path
• International mobility
• Internal R&D projects
• Knowledge sharing
• Personalized training

For more on our team culture and benefits, check out our careers page.

PALO IT Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Palo IT SG does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Palo-IT.

Your personal data will be processed for the purposes of managing Palo-IT’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Description

The successful candidate will be part of the Cloud & Platforms team.

He/She will be responsible for the following:

• Deep exposure to on-premises Linux and/or Windows administration on VMWare including SAN and storage solutions.

• Perform system administration and troubleshooting activities (including outside normal business hours) in accordance with company policies and procedures.

• Create and maintain documentation, and processes.

• Provide a focus on automation and Infrastructure-as-Code (IaC) to improve agility using tools such as Ansible, Python, and Terraform.

• Support audit and infrastructure/network security scans, disaster recovery and security related drills.

• Explore, learn and deploy new technologies that will help the company to reduce cost or improve operational efficiencies.

Requirements

• Possess a degree in Information Technology or related fields.

• Minimum of 5 years of IT experience with at least 3 years of hands-on experience in a similar role.

• Experience managing both Unix (Linux and/or AIX) and Windows servers. Expert level (e.g. certified) in one at least one: covering installation, configuration, security, networking, storage, patching, hardening etc.

• Experience working in VMWare environments.

• Practical experience administering SAN and related storage technologies.

• Experience with Python/Ansible scripting skills for provisioning and automating dynamic infrastructure.

• Demonstrate strong knowledge in infrastructure areas such as virtual server technologies, storage, networking, internet protocols, operating systems, scripting & monitoring tools and IT Security.

• Experience in Agile methodologies, DevOps, CI/CD and related tools preferred.

• Strong analytical, project management, communications, and interpersonal skills.

We are looking for an L1+L2 App Support Engineer to join our dynamic team! You will play a crucial role in ensuring the smooth operation of applications and providing technical support to end users.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Be part of a collaborative and supportive team that encourages growth.

Responsibilities:

• Provide assistance to users, addressing inquiries, troubleshooting issues, and quickly implementing solutions to restore systems to full functionality.
• Keep detailed documentation of user interactions, reported problems, solutions applied, and any further actions needed by management or tier 2 support.
• Create user manuals and troubleshooting guides to aid both support teams and users in effectively interacting with the system.
• Work closely with L3 Technical staff and the project manager to set objectives and plan system upgrades and improvements.
• Develop and implement new procedures to boost efficiency, enhance customer satisfaction, and reduce operational costs.

Job Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Prior experience with some programming languages (HTML, JAVA) will be an added advantage.
• Good writing and communication skills.
• Strong troubleshooting and problem-solving skills with experience in identifying and resolving complex technical issues.
• Experience with ticketing systems (e.g., JIRA, ServiceNow) and version control tools (e.g., Git) is a plus.
• Prior experience in supporting mobile or web applications is an added advantage.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Senior/C&S Design Engineer (MNC A1 main con building projects)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re embarking on an exciting new institutional building project in the CBD and are now looking for a Senior/C&S Design Engineer to join them during an exciting time in their development.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree/diploma in Civil/Structural Engineering, Construction Management, or related field
• Minimum 5 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central Singapore

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

.Net Test Engineer (9 Months Contract)

• Working Location: Yio Chu Kang MRT
• Working hours: 8.30am to 6.15pm, 5-days week
• Salary Range: $4,000 - $6,000

Responsibilities:

• Develop and implement test strategies, test plans, test cases, and test scripts for .NET applications.
• Design and execute automated tests using frameworks such as MSTest, NUnit, xUnit.net, or SpecFlow.
• Perform manual testing as necessary, including functional, integration, regression, and performance testing.
• Collaborate with developers and stakeholders to understand requirements and ensure comprehensive test coverage.
• Identify, record, document, and track bugs to resolution using tools like Azure DevOps, JIRA, or similar.
• Establish and maintain CI/CD pipelines for automated testing and deployment.
• Participate in code reviews and provide feedback on code quality from a testing perspective.

Requirements:

• Proficiency in C# programming language and .NET frameworks (e.g., ASP.NET Core, MVC).
• Experience with testing frameworks and tools such as MSTest, NUnit, xUnit.net, SpecFlow, Selenium WebDriver, or similar.
• Familiarity with API testing tools like Postman, Swagger, or SoapUI.
• Knowledge of database testing techniques and ability to write SQL queries for data validation.
• Understanding of continuous integration and continuous deployment (CI/CD) practices and tools.
• Strong analytical and problem-solving skills, with attention to detail.
• Effective communication skills and ability to collaborate with cross-functional teams.
• Experience with Agile methodologies and working in Agile teams.

Qualifications:

• Bachelor’s degree in Computer Science, Engineering, or related field; relevant certifications (e.g., ISTQB Certified Tester) are advantageous.
• Proven experience as a Test Engineer or Quality Assurance Engineer, specifically in testing .NET applications.

☎️ Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Handle schedule work in accordance with the master and detailed work program.
• Manage technical and engineering problems.
• Liaise with consultants for technical issues and organise site activities with subcontractors.
• Maintain quality standards and perform site inspections and resolve technical issues on time.

Requirements:

• Degreein Civil Engineering recognised by Singapore PE Board.
• Registered Resident Engineer with IES/BCA.
• At least 3 years of relevant working experience preferably in handling LTA projects.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Engineer/Senior Engineer, Fire protection

Duties & responsibilities:

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples
• Review and align Fire protecton design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hosereel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)
• Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the schedule
• To attend meeting with contractors to address issues and update progress
• Study and reviewing of drawings, specifications for compliance
• Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.
• Plan and lead testing and commissioning of the fire protection systems.
• Follow up with site / authority inspections, defects rectifications of the fire protection works.
• Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.
• Follow up with maintenance of fire protection systems during DLP.

Education / Experience / Special Skills:

• Degree in Mechanical Engineering/Building Services OR Diploma in Mechanical Engineering/ Building Services
• 5 years of relevant experience
• Proficient in MS office
• Good communication and written skills
• Experience in Water Mist system and/or foam system is added advantage
• Able to work independently and possess good interpersonal skill

• Deliver technical solutions to clients and take responsibility for the standards of work, project sign off and client satisfaction.
• Provide client support, assisting with troubleshooting and design, configuration and escalated problem management.
• Act as key project team members charged with the analysis of client and technical requirements, specifications development, solution design and development, and in some environments may consult on testing and deployment processes.
• Expected to be technology leads for specific technologies and to use their deep knowledge of these technologies to propose enhancements.
• Interact with clients on site to meet complex requirements of a solution.
• Escalate unresolved problems and issues to the relevant third parties.
• Respond to escalated client requests and support client applications to a first line resolution.
• Escalate complex problems to the relevant third parties.
• Write reports and proposals and complete and maintain project documentation.
• Assist with the documentation of standard operating procedures relating to installations and fixes.
• Act as coach and mentor to more junior Implementation Engineers and Technicians.
• Assume responsibility for the co-ordination of the activities of the Engineers, in line with performance targets.
• May be required to serve periodically on the customer service desk, providing third line telephonic, remote and on-site support and problem management.
• Included in higher complexity design work, with input to the design expected.
• Expected to take ownership of relevant technologies according to domain or specialization.
• Knowledge, Skills, and Attributes:
• Good understanding and appreciation of technical design and business principles
• Demonstrates project management and administration ability.
• Good project skills which are demonstrated in the execution of installations and other assignments.
• Demonstrate customer engagement skills.
• Demonstrate relevant domain specialist knowledge.
• Good verbal communication skills
• Client focused and displayed a proactive approach to solving problems.
• Ability to work under pressure.
• Ability to coach, mentor and provide guidance to team members.
• Good understanding of project management principles

Academic Qualifications and Certifications:

• Computer Science / Information Technology Degree or equivalent together with specialized training in new technologies and legacy systems or equivalent
• CCNP (SDN, ACI, SDA, SD-WAN, DNAC), Meraki
• CCNP (Wireless, Meraki)
• ACMA, ACMP, ACCA, ACCP
• ACFE, ACSE
• JNCIA, JUNCIP-ENT, JCIA-MistAI
• CCSE, PCNSE, NSE4
• SolarWinds NPM, NCM
• CCIE – highly advantageous
• F5 Certified Technical Specialist (30X track) – highly advantageous
• Nokia GPON – highly advantageous
• Project management certification

Required Experience:

• At least 5 – 8 years' professional technical experience related to software development, systems design and deployment, or networking and infrastructure within a large scale (preferably multi- national) technology service environment.
• Experience in designing and building complex LAN and large WAN.
• Expertise in routing/switching technology, including BGP, OSPF, etc.
• Experience in designing and building complex data center network with Software Defined Networking (SDN) solutions such as SD-WAN, Cisco ACI, VMware NSX or any OpenFlow protocol.
• Experience in designing and building complex WLAN – Cisco/Meraki/ Aruba/ Alcatel/ Juniper Mist
• Extensive in Network Access Control – ISE/ Aruba ClearPass
• Extensive hands-on LAN switches: Cisco N9K, Alcatel Omni Switches, Juniper EX switches
• Extensive hands-on Wireless site survey; Post & Pre heatmap generation
• Experience in designing and building complex campus network with Software Defined Access (SDA) solutions from Cisco or any other SDA vendors.
• Experience in network automation via scripting (e.g., Python, Ruby) or tools (e.g. Ansible, Algosec, Chef)
• Experience in designing and building network security (Checkpoint, Palo Alto, FortiGate, Cisco firewall, IDS/IPS, VPN, SSL), Content Networking (cache, load balancer, F5, etc.)
• Experience in project management methodologies

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

Job Responsibilities :

- To develop and maintain business strategies by achieving sales target and increased market shares.

- Visits customer to drive sales pitch and product presentations

- Responsible for achieving sales revenue and profit target

- Align and link business strategies set by company

- Build strong relationship with existing and new customers

- Provide sales and after-sales support, in coordination with our internal departments and customers

- Prepare sales quotations for customer.

- Follow up with after sales issues.

- Market studies and feedback to sales manager

- Monitors sales quotation status and forecast.

- Performs order screening and preparation for clean order processing

- Ensures proper documentation of all sales quotations in line with the ISO standards and processes.

- Participate in any ad-hoc projects as assigned by management and or sales manager from time to time

Job Requirements :

- Diploma / Degree in Engineering

- 3 years of relevant experience

- Experience in Process Instrumentation / Automation Industry

- Experience with MRO Sales an added advantage

- Independent and Team player

- Excellent communication and interpersonal skills

Familiar with CRM and ERPLN

• Well Established Company
• Basic $4000 - $5200 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• Training provided for those without/lesser experience

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets.
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc.
• Develop the work schedule and coordination of the project works to ensure project is on schedule.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Prepare all relevant checklist for Installation and Testing & Commissioning Works.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works.

Requirements

• Degree in Mechanical Engineering.
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage.
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office.
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc.
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client.
• Good technical knowledge in understanding the Mechanical System.
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time on project site.

Salary: (Junior, 2-4 yrs related experience: upto 4,000)

Time : Mon - Fri: 8.30am – 5.30pm

Location :Woodlands

JOB SCOPE (Design Engineer)

- Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

- Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

- Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

- Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

- Minimum ITE, Diploma or Degree in Mechanical Engineering

- Minimum two years’ experience in customized Automation Machine Design.

- Experience in customized semi-con/ connector/ machine design preferred.

- Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

- Intuitive in mechanical movement, function and performance, good perception of 2D & 3D objects.

Probation period - (3 to 6 months)

Annual Wage Scheme - (Basic annual + 13th month ++)

Performance Bonus - (Depending on Sales and Nett profit)

Job Description

. Site solving skill & site coordination to customer.

· Competent in his/her engineering skill especially in design/knowledge & understanding of code of practice in building services to customer.

· Ensure quality of material & installation by suppliers/subcontractors in line with ISO quality plan.

· Coordinate, monitor & control of supplier’s materials/equipment & subcontractors installation quality.

· Produce shop drawings & coordination of drawings & coordination of drawings etc.

· Prepare work schedules & attend client meeting and internal meeting

· To assist manager on the day to day activities under the master planning schedule, quality, safety etc

· To control proper coordination with main contractor to prevent rework etc

· To control site material/equipment so as to reduce wastage.

· To communicate closely with suppliers / subcontractors to reduce delivery delay affecting progress.

· Check for non conformance product or installation to avoid defects.

· To explore new technology and new installation methods so as to improve productivity level

· Follow up closely on site progress & communicate clearly to subcontractors & supplier

· Check for non conformance product or installation to avoid defects.

· Other related duties as assigned

Requirement :

· Diploma/Degree in Mechanical Engineering.

· Singaporean or Permanent Resident only.

. Knowledge of ISO 9000 / OSHAS 18000 (Minimum Requirement)

. ISO Internal Quality Auditor

. Building Construction Safety Supervisor Course

. Experienced in subcontractor will be advantageous.

• Position: Marine Service Engineer
• Location at Tuas, Work on Vessel (Site)
• 5 Work Days 8am-5pm / 8.30am-5.30pm / 9am-6pm
• 13 Month Bonus & Performance Bonus Are Provided
• Entitled to Medical Benefits + Transport Allowances
• Basic Salary is Open For Discussion Based On Skillset

Company's office is located at Tuas Singapore and a service & solutions providers of marine engine services and marine engine spares, including de-carbonization, dual fuel engine conversion, iTAC coated piston rings, and condition monitoring systems.

Roles & Responsibilities

• Perform the repair, maintenance or overhaul of marine diesel engines 2 & 4 stroke under supervision of Engineer / Technicians.
• Comply with all the requirements to carry out the jobs in the shipyards or anchorages.
• Lifting and shifting heavy components of engine back to workshop for repair / recondition and vice-versa.
• Ensure prompt response and smooth communication with the customers
• Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

• Must At least Nitec / Diploma in marine / mechanical / engineering qualification
• At least 3 years of related experience as Marine Service Engineer.
• Hands-on experiences in trouble-shooting, maintenance and repair is an added advantage
• Prefer someone with maintenance experience in marine engine makers like MAN and Wartsila
• Training period at office (Tuas), after training will work on vessel.
• Willing to work in shipyard / anchorage environment

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996