Responsibilities:

• Prepare reports, designs and drawings.
• Make calculations about pressures, loads and stresses.
• Consider the strength of construction materials and select appropriately.
• Provide technical advice on safe designs and construction.
• Obtain planning and/or building regulations approval.
• Analyze configurations of the basic components of a structure.
• Monitor and inspect all work undertaken by contractors to ensure structural soundness.
• Inspect properties to evaluate the conditions and foundations.
• Use computer aided design technology for simulation purposes.

Requirements:

• Degree in Civil or Structural Engineering
• Professionally registered with the Institute of Structural Engineers.
• Expert experience in project management.
• Advanced knowledge of construction methods, materials and legal regulations.
• Sound understanding of physics and mathematics.
• Ability to liaise with professionals from other disciplines.
• Meticulous attention to detail with the superb organizational skills.
• Ability to work under pressure and meet tight deadlines.
• Excellent communication and IT skills.

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Responsibilities and Duties

• Assist in the resolution of technical problems.
• Providing on-site and remote technical support.
• Diagnosing, troubleshooting, and repairing of semiconductor equipment.
• Identifying technical problems and making analysis in different Service categories.
• Ensure documentation and data are well recorded into the system in a timely manner.
• To manage spare parts inventory and to ensure sufficient stocks on hand and smooth operations.
• Follow up status of shipment and delivery with Operations Team where required.
• Understanding customer's needs and providing support and solutions.
• To file warranty claims on products with principals and enter claims into the system.
• Gathering / analyzing customer feedback and complaints on equipment breakdown.
• Liaise with the principal concerning product quality-related issues.
• Manage and provide effective leadership to the service team

Requirements

• Candidate must possess at least NiTEC/Diploma/Higher/Graduate Diploma in Electronics and/or Electrical Engineering or equivalent.
• Proficient in handling technical and service-related issues.
• Good communicative skills and a strong sense of responsibility.
• Ability to interact with people of all levels.
• Able to work independently.

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Responsibiliites :

• Collaborate with the business development Team to develop and come up with detailed Solar PV system designs that meet client requirements, local codes, and industry standards.
• Optimise system layout for maximum energy production and cost-effectiveness.
• Perform solar resource assessments to determine energy generation potential.
• Conduct shading analysis and assess site suitability for solar installations.
• Develop bill of materials (BOM) for projects.
• Use modelling software to predict system performance, energy output, and financial returns.
• Prepare and submit permit applications, ensuring compliance with local regulations and utility requirements.
• Coordinate with regulatory authorities to secure necessary approvals.
• Develop and implement quality control procedures for solar installations.
• Conduct inspections to ensure system integrity and safety standards.
• Provide technical guidance and support to installation teams during system setup.
• Troubleshoot and resolve technical issues as they arise.
• Create and maintain accurate and detailed project documentation, including schematics, drawings, and technical manuals.
• Monitor and ensure systems are operating optimally before handing over to clients.
• Promote and adhere to safety protocols and ensure that all installations meet safety requirements.
• Prepare weekly and monthly progress reports for every project to ensure that projects are within schedule.
• Provide technical support for sales, proposals, and during potential client meetings.
• Must be proficient in AutoCAD
• Solar experience is added advantage

Requirements :

• Bachelor’s Degree in Engineering or relevant field
• Prefer two (2) years of relevant work experience
• Preferably with Energy Industry or Renewable Products background
• AutoCAD, PVSyst or Helioscope skills preferred
• Technical advisors, EPC contractors, BD related roles are welcome to apply

• Project Planning and Scheduling: Define project scope, organize tasks, set timelines, and manage resources to achieve project milestones and final deadlines.

• Resource and Risk Management: Coordinate materials, workforce, and equipment while identifying and addressing project risks to maintain quality and avoid delays.

• Progress Monitoring and Documentation: Track each phase of the project, document updates, and prepare detailed reports for stakeholders, including test report documentation.

• Quality and Benefit Realization: Ensure that all work meets quality standards, aligns with client expectations, and delivers intended project benefits.

• Safety Awareness and Leadership: Promote and enforce safety protocols, leading by example to maintain a secure and efficient work environment.

• Essential Skills and Qualifications:

• Electrical Drawings and CAD Proficiency: Skilled in reading electrical schematics and proficient in CAD software (AutoCAD, Revit) for design and planning.

• Strong Organizational and Problem-Solving Abilities: Ability to organize complex projects and solve challenges that arise.

• Effective Communication: Clear, professional communication skills for collaboration with team members, contractors, and clients.

• Driver’s License (Preferred): A valid driver’s license is advantageous for site visits and project mobility.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

Job Title: Mechanical Engineering Technician (Motors and Engines)

Responsibilities and Duties:

• Inspect and troubleshoot equipment, machinery, and operating systems, identifying and correcting issues as needed.
• Maintain high standards in mechanical operations, ensuring systems meet operational and safety requirements.
• Diagnose and resolve mechanical issues with motors, pumps, conveyors, hydraulic systems, and other related equipment.
• Provide expert-level technical support and guidance to junior technicians when necessary.
• Perform both independently and as part of a team to ensure timely completion of tasks.
• Adhere strictly to company safety guidelines, procedures, and industry standards.
• Conduct regular preventive maintenance on machinery as per established protocols.

Technical Skills:

• Use a variety of hand tools, power tools, and rigging equipment for daily tasks.
• Perform welding using cutting torches as needed for repairs and maintenance.
• Operate and maintain heavy industrial equipment, including forklifts, scissor lifts, basket trucks, and bobcats.

Compliance and Reporting:

• Ensure compliance with both company and customer regulations, as well as policies.
• Maintain and manage personal tools, including keeping an up-to-date, documented personal tool inventory.
• Accurately manage time records and complete work orders in a timely manner.
• Foster positive relationships with both customers and team members through effective communication and professionalism.

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Central
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Work with Project Manager to confirm system designs and procurement
• Monitor project progress of sub-contractors and conduct site inspections regularly
• Manage sub-contractors for efficient and prompt completion of work
• Make sure project is carried out according to schedule
• Attending to all design and technical meetings with consultants, main contractors and system specialists to ensure all aspects and requirements were taken care of
• Attending to all site meetings with owner, consultants and main contractors on all matters related to the project operation and coordination
• To review the tender specification requirement and supplier quotation compliance
• Raise MR and order material & arrange manpower for necessary works
• To do quantities take off & prepare cost breakdown and comparison sheet
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess at least Diploma / Advanced / Higher / Graduate Diploma in Mechanical Engineering or equivalent with minimum 3 years relevant work experience in relevant field

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Descriptions

• Assist Project Manager in all on-site technical/ engineering matters and deal with Main Con EngineerPrepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports
• Lead in Site Coordination and execution relating to the construction project, Deal with Maincon Supervisor ,Workers and subcon.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors meet clients’ regulatory work requirements.
• Complete technical and safety submissions prior to commencement of Bored Piling Projects
• Manage Site operation issues
• Carry out resource planning for bored Piling projects
• Liaise with Consultants clients and main contractor
• Prepare Flow Chart and Methods of Construction

Requiments

• Degree in Civil Engineering or Geotechnical Engineering (accreditated by Singapore PEB)
• At least 2-5 year experience in Piling or Geotechnical field is advantageuos
• Familiar with AUTOCAD
• Computer proficient in MS Office
• Good interpersonal and communication skills
• A good team player with ability to meet tight deadlines
• Good organizational planning skills
• Effective communication and coordination skills and teamwork

Project engineer/Senior Engineer

Develop, maintain and manage working relationships with clients and all related parties.
Manage and implement overall project.
Coordinate with Project Manager on project matters
Supervise and provide advice to junior Project Engineer(s)
Check working drawing, identify discrepancies for resolution
Keeping track on variation and claims of contract
Perform project cost review on a regular basis and on identified areas.
Plan and manage project schedule to ensure timely delivery.
Perform incoming inspection on project materials delivered on site by suppliers or vendors.
Site coordination with subcontractors, supervisors and clients.
Ad-hoc duties as assigned by superior(s).

Job Requirements

Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).
Has relevant experience in infrastructure projects, e.g. roads and rail projects
Possess skills, knowledge and ability to supervise and manage project effectively
Independent, resulted-oriented and self-driven team player with good communication skills
Class 3 driving license will be added adv

need 6 more.. LTA project..Grad. PEB recognised

Senior/Mechanical Design Engineer

Working day: Monday - Friday
Working Hour: 830am - 6:15pm
Salary range: $4,000 - $6,000 (depend on experience)
Location: Woodlands Ave 9

Responsibilities:

As a Senior Mechanical Design Engineer, you'll play a crucial role in our team, leading the design and development of our products from concept to production. Your focus will be on driving innovation, ensuring our products meet the highest standards of quality, performance, and reliability. You will collaborate closely with cross-functional teams, playing a key role within the team.

Job Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Job Requirement

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Min 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Responsibilities

• Offer technical support to customers (Semicon test products).
• Assist with product installation, configuration, and optimization.
• Conduct product demonstrations and training sessions.
• Collaborate with sales and engineering teams to address customer needs and provide feedback.
• Perform field testing and gather customer insights for product improvement.

Requirements

• ITE/Diploma/Degree in Mechanical Engineering
• No experience candidate is welcomed to apply
• Cleanroom Exp is preferred
• Detail-oriented and meticulous in handling test products

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

• Job Purpose

Biosearch Technologies™ provides products and services for genomic analysis that support mission critical applications for global customers in agrigenomics and human healthcare. The portfolio offers integrated tools and technologies to accelerate sample preparation, amplification, cloning and expression, next generation sequencing (NGS), custom oligonucleotide synthesis, nucleic acid chemistry reagents, and oligo therapeutics. Biosearch Technologies is currently recruiting for a field service engineer II to join us in providing front-line technical support to our repertoire of genomics platform and consumables as described above.

With a focus on always putting customers first, our Field Service Engineer is expected to work closely with our regional customer base to ensure maximum equipment uptime, software optimal utilization, training and troubleshooting functions. 

Field Service Engineer is expected to be a role model and poise to mentor and develop junior service engineers on the day-to-day activities, coaching sessions and able to report and assign task to juniors and self and provide reports back to global service leads.

Key Responsibilities

• Build strong service support rapport with regional key account customers in APAC.
• Site Preparation; instrument Installations; training; troubleshooting, preventative maintenance as core task
• Facilitating service contract proposals and tracking as and when required.
• Function as an integral part of a wider global support team to offer “In Time zone 24/7” emergency service support call and troubleshooting assistance as and when assigned with urgent breakdown call with overnight travel either regionally or globally.    
• Train and support customer in the application of “SFDC sales force” CRM platform as a service case tool to record and track service cases
• Support the generation of training aids and technical documentations as required
• Provide timely and concise Pre/Post trip reports and SFDC updates to maintain proper customer CRM records
• Work closely with the commercial and customer service team to ensure prompt and responsive customer support in building strong customer allegiance for the LGC, D&G branding.
• After normal office hours on-call support assignments (global support rotation) as part of a global technical support framework.
• Involving in engineering project, product management request for technical feedback/support
• The individual will be responsible for instrument commissioning, training, test and repair of equipment, and preventative maintenance.
• Expected to mentor junior field service engineers in problem resolution.
• Seeks continuous improvement processes to optimize technical support to our customers in the region.
• This position is responsible to effectively communicate instrument status, issues, and customer complaints and needs to appropriate managers and internal resources.  Will be responsible to proactively take ownership and follow-through with generated issues or complaints reported from themselves, as assigned, or from junior service engineers.
• Responds with flexibility and collaboration to the needs of the business – both internally and externally – by addressing important corporate initiatives when requested by management.
• Ability to handle clients, distributors professionally during all interface and maintain a positive company images
• The motivation to learn and constantly improve processes and tools
• Adhere to company safety standards and promote safety culture throughout the company
• Any other ad-hoc projects and duties as required by the management

Job Description

• Prepare, schedule, manage, coordinate and monitor projects
• Perform value engineering design to achieve high efficient standard for ACMV System
• Develop tender specifications and perform natural & unbiased tender evaluations
• Attend to site test and inspections to ensure quality of standards and all health & safety requirements are adhered to
• Assist in the preparation of progress payments claims and variation orders where required
• Work closely with Project Managers and site personnel in the execution of task schedule
• Supervise contractors, sub-contractors, suppliers and staff at site

Requirements

• Diploma / Bachelor degree in M&E or related engineering field
• For Senior position, at least 2 years of professional project management experience, preferably in ACMV and within construction industry
• Understanding of building systems particularly in HVAC systems and other M&E disciplines
• Ability to identify innovative solutions to problems
• Proactive, possess a positive attitude and able to work independently
• Must have good interpersonal, verbal and written skills
• Must have initiative and possess desire to learn
• Ability to multi-task and work as a team

Job Description :-

· Responsible for day-to-day operation and planning manpower allocation based on job requirements

· Arrange logistics for deliveries and provide photo reports for job completion

· Source materials and spare parts as a purchaser when needed

· Proficient in reading drawings for steel and piping work

· Flexible in adapting to changes in job scope

· Inspect and prepare quotations for workshop fabrication, vessel port calls, anchorage work, and

voyage jobs

· Manage production teams and subcontractors for efficient job mobilization

· Prepare project schedules and oversee project activities for timely completion and quality

· Negotiate and liaise with vendors and suppliers for best prices and availability of materials

· Conduct regular equipment inspections and maintenance

· Monitor project budgets and expenses for cost-effectiveness

· Maintain documentation and records related to project activities and operations

· Stay updated with industry trends and suggest improvements and innovative solutions

· Foster teamwork and effective communication to create a positive work environment

· Adhere to safety protocols and regulations for a safe working environment

Requirements :-

· Higher Nitec/Diploma/Degree in Marine Engineering or equivalent

· Highly motivated individual with a strong work ethic and proactive approach

· Quick learners who take ownership of diverse projects and continuously acquire new skills

· Forward-thinking professionals who seek challenges for self-improvement and assisting others

· Able to travel overseas for Project discussion and management

. Have driving license is a bonus

· Fresh Graduate is welcome