Salary： $3,500-$4,500
Working hours : Mon-Fri 8am to 5pm
Working Location: Woodlands

JOB DESCRIPTION

• Ensure proper usage and calibration of measuring equipment
• Managing customers' request and complaints (KIS)
• Ensure customer request is reflected in process and participates in assessing CAR/8D if necessary
• Supervising QC activities (One-point-lesson etc)
• Compiling Raw Material Inspection/Certificate report
• MES management (measurement lock and report format etc)
• Rework Data Compiling
• Weekly Report
• Part Measurement (Surelnspect / Ultrascan etc)
• Conduct Various audits (Internal process, Site, Supplier etc)
• Handle Audits from customers and ISO certification bodies
• Document Control of whole KTS
• Maintain and generate Quality Management System procedures and processes
• New employee Briefing and OJT for Quality portion only
• Continual Improvement Activities
• Process/ Une Audit per month

REQUIREMENT

• At least Diploma in any field
• 4 or more years of relevant experience
• ISO audit experience

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Evelynn) || EA Personnel License R24120580

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed a data center project
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

Job Requirements

· Lead Process Design Engineer for the Process Design of Storage Terminals, Process Units in Refineries and Chemical Plants which involves the Basic and Detail Design including the preparation of PFDs, P&IDs, System Description, Process Control Philosophy, Hydraulic Calculation, Heat Transfer Calculation, Heat & Material Balance, Relief System Calculations, Utility Consumption, Equipment data sheets & Instrument data sheets.

· Prepare Technical Proposals including preparation of PFDs, P&IDs, hydraulic calculations and system description.

· Design Calculations for Pumps, heating coils, Thermal Relief valves and Tank venting calculations.

· Analyze pressure relief design scenario and calculate the relief load and validate the results

· Prepare Process Data Sheets for Instruments, Equipments & Tanks.

· Review other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc.

· Participate in HAZOP and SIL study, Review HAZOP Report and prepare HAZOP & SIL Close-out reports.

· Participate in P&ID Design Review and Process Control Philosophy Review, and prepare review Close-out reports.

· Design of Fire Protection System as per NFPA for the Storage Terminal, which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Design of wastewater collection and disposal system for the Storage Terminal which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Prepare Surge Analysis report using Pipenet Transient Module.

· Development of automated excel spreadsheets for process calculations.

· Performing Simulation using Aspen HYSYS & Unisim

· Preparation of simulation report & HMB.

· Equipment Sizing and Preparation of Equipment Data sheets.

· Preparation of technical specification in line with the project requirements

· Performing Hydraulic calculation and preparation of Data sheets for control valves.

· Performing Relief load calculation and preparation of Data sheets for safety valves.

· Design of Flare system using Flarenet.

· Utility sizing and Preparation of Utility Consumption report.

· Preparation of Process Control Philosophy & Cause and Effect diagram.

· To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

· To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Chemical)

Experience

Preferably 10 years’ experiences

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word

3) Smart Plant P&ID

Code Knowledge

1) API 2000, API 520, API 521, API 526, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Job Description

• Lead and manage a team of Sub-contractors for all addition and alteration (A&A) work
• Plan, organize, co-ordinate and implement A&A work timely and ensure compliance to all authority and client's requirement
• Liaise with sub-contractor and vendor for quotations and purchase orders
• Evaluate project requirements and generate feasible proposals for work completion
• Liaise with client's appointed officer on all issues related to the A&A and project work
• Preparation and submission of shop drawings, point schedule, materials, write-ups, and other necessary items for approval
• Track and manage project progress and submit progress claims
• Lead, coordinate, and execute testing & commissioning works for A&A works with proper documentation
• Conduct site surveys, attend meetings on-site, evaluate installation progress on-site
• To arrange and provide servicing & maintenance works for active sites

Requirement

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• At least 1~3 years of working experience in construction or retrofit project in BMS/ACMV/Electrical/ELV
• Good knowledge of Building Services (BMS, ACMV or Electrical or ELV) and project management
• Proactive individual who can work independently
• Good interpersonal and Communication skills
• Able to multi-task and achieve deliverables on schedule
• Able to generate project reports via Word, Excel, Powerpoint

We regret only short listed candidate will be notified.

We are looking for candidates with experience in GCP.

The requirement is for the candidates to be able to independently work on and assist in GCP projects across the organization wherein on-premise applications would be migrated onto Google Cloud platform and work as an individual contributor.

Manage communication with client, independently drive and deliver application modules.

Good experience on Google Cloud Platform, Cloud Storage, Big Query,Dataflow,Dataproc,Composer,Python,Pyspark ,Terraform, GitHub and data pipeline development. Handson experience ingesting source files ( csv/jsons/xmls) as source to GCP.

Must have worked on GCP real-time implementations(Migration project exposure)

Candidate should also have good understanding of data landscape and should be able to understand end to end architecture. Having exposure to Banking domain is a plus.

Roles & Responsibilities

• Perform complex day-to-day development for GCP cloud environment.

• Develop, maintain, and tune highly complex scripts using Python and Big Query.

• Managing and designing solutions related to Data Engineering, Data Analysis, Data modelling, Data Warehouse, Data security, ETL

• CI/CD Implementation of cloud solutions.

• Automation of Infrastructure deployment using Terraform and GitHub Actions.

• Develop analytical functionality and complex transformation that will be finally deployed in production data-platforms.

• Excellent Communication & Stakeholder management skills.

• Should be able to recommend implementation best practices and suggest improvements for an existing application.

Please share resume to [email protected], [email protected], [email protected]

5.5 days
9am - 6pm / 9am - 1pm
$ 2400 - $ 3200
Jurong East

Job Requirements

• At least one year of relevant working experience
• Knowledge of MS Windows Server and basic PC hardware structure
• Knowledge of TCP / IP, Network Structure, Firewall, LAN and VLAN
• Advantage if Milestone VMS Certified
• Professional experience in a system administration role supporting multiple platforms and applications
• Good to have experience with anti-virus software, intrusion detection, firewalls and content filtering
• Ability to communicate network / applications security issues to peers and management
• Self-motivated to driving individual sales KPI
• Class 3 driving license will be in advantage

Job Responsibilities

• Manage and coordinate with multiple vendors, for Security and IT systems such IP Surveillance, Card Access,
• Execution and supervision of project activities such as drawings, submittals, design, estimation, follow-ups, installation, commissioning, handing over, training, etc
• Coordinates with Client / Consultant’s representatives for system requirement, any site instructions, assign targets for accomplishments and ensure targets are met on Daily / Weekly basis.
• Submits site reports, inspection requests, estimates and all applicable monitoring reports on regular basis or as required (for engineer)
• Supports the Project Manager in accomplishing all the goals and targets for the groups at site.
• Perform onsite troubleshooting and technical support. After which to propose security solutions to customer in various sectors.
• Project management and documentation
• Perform test, configuration & commissioning of IP Cameras, VMS, SQL and network switches Requirements
• Prepare and follow up on quotation for Sales leads through technical specification provided in tenders and / or site surveys
• Presentation of products and services to potential clients
• Recommendation of effective solutions for customers’ requirements
• Account management to build and maintain good relationship with customers
• Other ad-hoc duties assigned

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Our client, a well-established MNC is seeking for a Product Specialist ( Automotive ) - $ 4,800.00 to $ 5,000.00 + Attractive Bonuses - Central area

Requirements

• Degree/Diploma holder
• Possess Automotive (vehicle) product/technical knowledge
• Possess good communication and interpersonal skills
• Ability to present, engage, and excite a group of audience
• Ability to work independently with strong analytical and planning skills.

Interested candidate can send in your resume (word format prefer) to [email protected]

Responsibilities:

· Responsible for assuring the implementation and compliance with the Quality Assurance System.

· Control and monitor all activities related to Quality Management System (QMS).

· Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents

· Responsible for the quality and workmanship of every activity, through knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations.

· Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.

· Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP

· Liaise the Technical Engineer for submission of material submittals to Consultant

· Other ad-hoc duties assigned by Senior Manager (QA/QC).

Requirements:

· Diploma in C&S Engineering / Architecture or equivalent

· Minimum 2 years of QA/QC experience in construction industry

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.


Responsibilities

• Set up physical network devices for capacity expansions.
• Implement automated monitoring and alerts for these devices.
• Develop scripts to update device configurations.
• Generate tickets for various Data Centre operations tasks such as cable checks, device replacements, and decommissioning.
• Perform firmware updates on physical network devices.
• Maintain logical access security and respond to live site incidents.
• Provide auditors with evidence of logical security for these devices.

Requirements

• Minimally 3 years handling Layer 2 protocols, Layer 3 networking with IP, as well as routing protocols
• Experience in troubleshooting across networking platforms
• Scripting skills in Python, PowerShell, and C#

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

· Provide First Call Resolution (FCR) technical support via phone and email. Ensure calls are answered and emails are responded in a timely manner.

· Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions.

· Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level

· Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

· Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

· Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Ideal candidate should possess the following:

· Candidate with minimum Higher Nitec, Diploma Certification in Computer/Electronic Engineering or equivalent discipline

· At least 1-year end-user support experience, desktop or technical service desk.

· To have the relevant Technical skills to support existing and new computing devices like desktops, notebooks, tablet devices and smartphones with knowledge of Windows Operating Systems, Active Directory Account Administration, and Microsoft Office applications.

Responsibilities:

• Good technical and project management abilities.
• Strong ability to develop, plan and organize resources efficiently.
• Communicating plans and challenges and options in engineering issues and solutions to various stakeholders and Clients alike.
• Inspiring a team of different nationalities and cultures.
• Professional integrity and exemplary conduct at all times.
• Proven problem-solving and achievements.
• Comfortable at work site conditions.
• Site supervision and able to co-ordinate well with sub-contractors, RE and RTO.

Requirements:

• At least 5 year(s) of relevant working experience in construction is required for this position.
• Candidate must possess at least a Degree in Engineering (Civil/Structural) or equivalent.
• Preferably Managers specializing in Engineering - Civil/Construction/Structural or equivalent.
• Knowledge in Microsoft project.
• Full-Time positions available.

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

• Diploma/ Degree in Electrical Engineering or related fields.
• Past Experience in an Engineering Consultancy will be an advantage.
• At least 3-5 Year(s) of working experience in the related field is required for this position.
• Shall be responsible for the design development, detailing, calculations,equipment selection, etc, as may be directed for specific portions of a projects.
• Shall be engaged in discussion with the relevant authorities for plan preparation and submission.
• Designs of electrical engineering service for building projects, and knowledge of mechanical engineering services
• Prepare tender documents, call tenders, evaluate tender returns and recommend tender awards
• Engage in discussions with relevant authorities for preparations and submissions ofplans
• Attend meetings with clients, contractors and suppliers
• Manage project through defined project scopes, detailed project plans & seek client’s agreements for sign-off
• Track project status and provide regular updates to ensure projects are on tracks
• Any other works as may be directed due to specific requirement of the projects

Responsibilities:

• Supervise and coordinate subcontractors works to achieve daily work schedules and to ensure compliance with specific requirements
• Assist the Project Manager in planning and monitoring of construction activities and production of shop drawings
• Liaise with relevant consultants and authorities on technical and engineering matters
• Monitor and coordinate the work of Sub-cons and Supervisors
• Coordinate the inspection of Civil and Structural works

Requirements:

• Candidate must possess Bachelor's Degree in Civil Engineering
• Preferably with working experience in foundation works
• Proficient in Microsoft Office and knowledge of AUTOCAD
• Independent, diligent and highly motivated with excellent team spirit
• Willing to work overtime including weekends and public holidays when necessary

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Be part of a team in creating state-of-the-art Secure Low Power SoC ARM-based SoC/MCU for the Low-End , Mid and High-End performance MCU product line in a IC Design Environment.

Responsible:

• Engage design team and architects to strategies DFT Test plan for SoC top level
• Create DFT test modes, scan architecture, clocking and reset architecture.
• Plan Pin-Muxing and Pad and Boundary scan (BSDL) generation
• Execute JTAG TAP network generation and verification.
• Quality check with Spyglass analysis for scan using spyglass tool
• Execute Scan insertion using DC / Tessent tools
• Deploy Scan constraints development for Atspeed, shift and slow capture mode.
• Generate ATPG pattern generation using synopsys Tetramax tools
• Analyze and report on test coverage metrics to ensure comprehensive testing of designs.
• Implement improvements to enhance test coverage and efficiency.
• Verify No-timing and SDF simulation of ATPG patterns using VCS and NCSim tools
• Implement MBIST MBIST repair and verification using Mentor Graphic Tessent tools.
• Boundary scan verification
• Generate STIL test patterns for tester
• Silicon bring-up and failure debug

Requirements:

• Requires BSc/MSc or PhD in electrical and electronic or Computer engineering
• Requires > 5 years or more of experience in DFT at IP and SoC top level. Proficient at using DC ,tetramax and MG tessent DFT tools
• Tape-out at least 5 chips and tested to pass on tester.
• Requires strong understanding of state of the DFT methodology , flat and hierarchical implement of DFT from IP to SoC top.
• Capable of understanding UPF to enable multiple power domain verification
• Capable of leading, review and guiding younger DFT engineers in their daily tasks
• Able to work in a team with a strong drive to excel
• Able to work independently on a given assignment and work hard to finish on time
• Good written and communication skills

Job Responsibilities:

• Responsible for the build/ imaging of desktop PCs and laptops.
• Responsible for the physical installation of hardware(monitors, PC, webcam etc), as well as the handover of laptops to users.
• Perform troubleshooting for client platform related problems.
• Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• Perform service request related to client platforms.
• Monitor the agreed service level, document & maintain the configuration of the systems; provide regular reporting to relevant parties.
• Involve in client platform implementation/upgrade project
• Perform asset management & update asset records.
• Perform user account management (eg. Create password, reset & delete)
• Perform local server administration to facilitate software distribution & patch management service."

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E • EA License No. 01C4394

• Reg. <R1548745> <Teoh Shiau Swang>

Location : Loyang near Pasir Ris

Industry : Aviation / Aerospace

• Support the managing of IT infrastructure platform systems.
• Operations and deployment projects of infrastructure systems across on-premises and cloud.
• Provide expertise and support for Windows and Linux operating systems administration, incident resolution and maintenance
• Installation, configuration, administration, performance monitoring and tuning, capacity planning and maintenance of the systems
• Develop systems operation procedures and other infrastructure related documentation
• Manage vendor relationship to ensure vendors meet contractual obligations
• Manage infrastructure projects for upgrading the platforms or introducing new technologies and platforms to the environment.
• Provide support and liaise with external service providers on IT Infrastructure Services enhancement, development, and deployment
• Support application and infrastructure projects.
• Work with different IT teams to support operations and projects.

Job Requirements

• Degree in Computer Science / Engineering or related discipline
• Must be familiar with various types of infrastructure systems platforms, including virtualization, servers, storage, operating systems.
• Good communication skills
• Self-motivated and have attention to detail.

Roles & Responsibilities

Responsibilities

· Responsible for project planning and site supervision

· Coordination for civil structure, architectural, mechanical and electrical works

· Ensure site safety and prepare safe work procedure with Safety personnel

· Prepare risk analysis and method statement

· Ensure the smooth completion of the project

· Must be prepared to work on site

· Assist the Project Manager in Site Management

Requirements

· Degree in Civil Engineering Only.

· Minimum 5 years of relevant experience in the construction industry

· Able to coordinate with consultants and sub-contractors

· Only Singaporean

We are expanding! If you have the drive and capabilities to take our challenge, please apply online with full details of your experience, qualifications, current and expected salaries by clicking the Apply Now button.

Roles & Responsibilities

· Oversee projects from start to finish, ensuring adherence to safety protocols, project timelines, and quality standards.

· Coordinate with project managers, engineers, safety team and drafter to ensure smooth project execution.

· Prepare Method of Statement, shop drawing and presentation prior for initiate project.

· Supervise and motivate site team, providing guidance and support to ensure productivity and efficiency.

· Conduct regular inspections to ensure compliance with safety regulations and quality standards.

· Resolve any technical issue, on-site issues or challenges that may arise during the construction process.

· Maintain accurate records of project progress, materials usage, and manpower allocation.

Responsibilities

• Perform equipment installation, tool improvement activities, maintenance, alarm compilation of equipment
• Perform repair, troubleshooting of equipment to minimize downtime
• Identify equipment failures, pareto of issues and weak point analysis for improvement
• Drive continuous improvement program, cost reduction, yield & OEE improvement
• Generate technical reports of the equipment

Requirements

• Bachelor of Electrical/ Electronics/ Mechanical/ Mechatronic Engineering
• Diploma in Engineering with at least 3 years of equipment maintenance experience will be considered
• At least 2 years experience in Semiconductor Industry
• Willing to commit for overtime when required

Working Days: Monday - Friday

Working Hours: 8.45am to 6.15pm

Working Location: Island wide (Client Site)

Office Location: Boon Lay Way

Salary: $2500 - $4000 + Transport Allowance

Position Summary

Reporting to the Sales Manager, this is a sales position in the field of environmental systems. Under the guidance of the Sales Manager, the Sales Engineer is required to enhance the sales activities by searching for new customers, developing customer relation, growing the customer base and converting leads into sales.

RESPONSIBILITIES

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Plan and oversee daily activities in meeting the project progress and quality goals.
• Provide continuous after sales support such as helping customers identify problems with installed equipment (if any), recommending improved material, machinery or parts for replacement and maintenance.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Ability to travel within Singapore as required up to 70% of the time. Occasional travel beyond Singapore

Requirement

• Diploma or Degree in any engineering fields.
• Prior experience in a similar industry with similar sales cycle with proven track record of success.
• Experience in developing and executing sales strategies.
• Prior experience with tender systems such as Gebiz
• Class 3 Driving License is a must, with or without own car welcomed to apply

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an experienced Quality Engineer. Reporting to the Principal Quality Manager, you are an essential member of the management team and responsible for the overall quality performance. This includes implementation, maintenance and improvement of Element quality management system (QMS). The successful candidate will have a sound working knowledge of ISO/IEC 17025, ISO/IEC 17020 or ISO/IEC 17065 requirements in relation to testing, calibration inspection and certification.

In this role, you will have interaction with clients, Accreditation Bodies and will be responsible for advising operational colleagues of the importance of quality, accuracy and integrity in the provision of the testing, calibration inspection and certification services we provide.You will be involved in leading quality at a local level and will work closely with the Principal Quality Manager to ensure that Element quality policies, processes and procedures are effectively implemented. As a quality leader within Element you will be capable of driving a culture of quality assurance and quality improvement, working closely with your operational colleagues and the wider Element quality community.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Ensuring all staff buy-in to the effective and efficient implementation of Element quality policies and procedure by providing advice, guidance and support on quality issues to Element Singapore and Malaysia business units.
• Driving quality improvements at every opportunity and proactive participation in continuous improvement and process improvement projects and ensure effective adoption of Element e-QMS throughout Element Singapore and Malaysia business units.
• Proactive participation in projects to deliver identified Quality objectives and contribute to and drive key initiatives to improve Quality awareness and compliance.
• Management of and participation in scheduled internal audits across management system and technical disciplines and proactively monitoring laboratory test equipment for calibration currency and advising management of upcoming schedules,ensuring corrective and preventive actions identified within specific laboratories are implemented and verified in a timely manner.
• Represent Element Singapore and Malaysia business units during assessments by accreditation bodies and audits by clients and controlled document holding and arrange to update appropriate documentation as necessary, control and issue of Element Singapore and Malaysia Quality Management Systems documentation and participate in the internal audit programme to monitor implementation of quality policies and procedures.
• Manage external and internal proficiency testing programs of all Element Singapore and Malaysia business units and prepare compliance and improvement metrics for Element Singapore and Malaysia business units quality as required.
• Writing and reviewing quality documentation as required and effective and efficient management of personal work schedules and timely generation of Element Singapore and Malaysia business units quality reports.

Job Requirements:

• Minimum Bachelor of Science or Engineering qualification.
• Proven experience (minimum two years) of managing quality management systems within a multi-discipline testing, inspection and certification environment, preferably multi-location.
• Demonstrable experience auditing against ISO/IEC 17025, ISO/IEC 17020 and ISO/IEC 17065.
• Sound knowledge of equipment calibration and analysing proficiency test data.
• Knowledgeable in uncertainty of measurement and risk assessment and hands-on experience with Element e-QMS preferable.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description

The Project Engineer is responsible for the safe, efficient and timely construction of Structural works. The incumbent is required to perform the tasks that includes, but not limited, to the following: -

• Work out MTO for the respective Projects and hand over to the material coordinator for follow up with the procurement of materials
• Maintain and upkeep the remnant material records for final reconciliation of materials
• Liaise with Project Lead/Superintendent to get knowledge of the project schedules
• Expedite the site fabrication and installation works with the respective sub-contractor teams in achieving targeted progress
• Updating and reporting project progress reports and plan for one -week ahead of activities to be completed
• Consolidate and update information to PR coordinator for items like galvanizing, machining etc apart from project materials for raising Purchase Requests, Variation Orders for client, Site Instructions for sub-contractors
• Coordinate with QA/QC in resolving issues and maintaining project quality standards
• Coordinate with Client representatives for resolving issues and maintaining project quality standards
• Red Line Markup drawings to be done progressively and update engineering regarding the site changes
• Liaise with Project Lead/Superintendent for drawing and site discrepancies, equipment structural clash checks for trouble shooting of fabrication matters and get information for site coordination
• Coordinate and organize scaffolding erection and de-staging activities with trades

Job Requirements

• Degree/Diploma in Mechanical Engineering or equivalen
• Postive attitude and willing to learn
• Fresh graduates are welcome to apply

R1552011

Peak Ocean EA License No. 18C9336

• Develop high-quality, clean, and maintainable code adhering to engineering best practices. Engage actively in the entire development lifecycle—designing, developing, reviewing, testing, and debugging to ensure robust and scalable solutions.
  • Exhibit versatility and adaptability, taking on diverse roles and challenges within the team as needed, including production support rotation duties to ensure high availability and reliability of our services.
  • Foster close collaboration with both internal and external stakeholders, including Operations, Trading, Compliance teams, and external partners on vendor integration projects. Maximize efficiency and ensure alignment with project goals through seamless integration of third-party services and tools.
  • Proactively review, test, and verify code to meet high standards for quality and security. Conduct comprehensive unit testing and optimize application performance, quality, and responsiveness.
  • Collaborate effectively with team members, ensuring open communication and a cohesive team environment that fosters innovation and productivity. Demonstrate strong ownership and effective communication in addressing production issues and resolutions to stakeholders.
  • Work independently with a strong sense of ownership and self-drive, managing tasks and responsibilities with minimal supervision. Swiftly address production issues, offering Level 3 support, and maintain composure under pressure.