As a standard cell design engineer in the Physical Design Group, you will develop your skills working on some of the most sophisticated process nodes targeting the largest foundries. You will contribute to designing our physical IP standard cell offerings for our internal and external customers at leading edge nodes including 5nm and beyond. Work with partners inside the company, as well as our partners in the EDA and foundry space.

Responsibilities:

· Design standard cell circuits and verify them for functionality, performance, and power

· Generate and validate EDA model views of standard cells

Required Skills and Experience :

· 5+ years of relevant circuit design experience (for BSEE)

· 3+ years of relevant circuit design experience (for MSEE)

· Experience with transistor level circuit design using Cadence Virtuoso and circuit simulators such as SPICE, SPECTRE

· An understanding of transistor level device physics and standard cell layout

· Knowledge of power, performance, and area tradeoffs

· An ability to learn a wide variety of industry standard view and modeling formats such as Liberty, Verilog, LEF, NDM, APL, GDS

· Scripting skills in either Tcl, PERL or Python

· Dedication to quality, collaboration, curiosity and continual improvement

Job description

• Experience in UVM verification methodology
• Experience in developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

Job Responsibilities:

• Advanced low-power physical design/integration flow development.
• Full-chip floor planning and place & route.
• Power network design and analysis.
• Support signoff timing closure, power integrity, and signal integrity.
• Physical Verification using DRC, LVS.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power physical design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

Key Responsibilities:

• Drive the overall Company’s Quality Assurance and Quality Control functions and programmes.
• Support the Project Management and QAQC teams in the development and implementation of Project Quality Plans (PQP)/CONQUAS/Quality Mark/Quality Management plans to achieve and maintain the highest level of Quality Standards.
• Ensure strict compliance with various Contractual QAQC Requirements conforming to Project requirements.
• Oversee the renewal audits & surveillance certification audits of existing ISO 9001 certifications to the latest versions.
• Act as main liaison party with external certifying body on all ISO certifications related to Quality.
• Oversee the continuous operations of the In house Academy with HR department to upskill and train all employees internally through in-house courses/training
• Conduct site-based Quality-related training to promote quality culture, better knowledge and awareness among project site staff.

Qualifications:

• Possess a recognized Engineering Degree with certification preferably BCA CONQUAS / QM manager certification and if having as Internal ISO 9001 Auditor certification is a plus point.
• At least 3 years' experience as a QA / QC role.
• Experienced in BCA CONQUAS / Quality Mark assessments is preferred
• Possess good communication skills and positive working attitude

a. Conduct feasibility study to develop basic and detailed engineering designs.

b. Manage budget and resources to ensure timely project completion.

c. Manage project to ensure compliance with legal and safety requirements.

d. Motivate team members and develop their skills.

e. Oversee workplace safety to ensure work is performed according to workplace safety procedures.

f. Minimum 2 years experience in Building Construction works.

Responsibilities:

· Pre and post technical support to customer on vision

· Provide technical support to customer

· Provide on-site service

· Evaluate and qualify knew products

Requirements:

· Degree or Diploma in Electrical / Optics Engineer

· 3 to 5 years of experience on machine vision application

· Good understanding on camera / lens / optical

You will be at the core team of Delta Research Center leading disruptive technological advancement with strong business value that empower company’s new business in intelligence machines, robotics and automation. As a research engineer, you will collaborate with technical experts to develop state-of-the-art mobile robot products / solution. You will play a key role in continuously improving existing and new products /technology, as well as be part of a dynamic and growing ecosystem in this field. You will manage and execute research programs and projects – particularly in the domain of robotic manipulation that develop and deliver impactful research and business outcomes.

Key Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Integration, testing and validation of R&D outputs into AMR platforms
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including own products
• Providing hands-on on-site support for software development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable software packages
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Job Requirements:

• Degree/Masters in Electronics, Computing, Mechatronics Engineering or equivalent
• Candidates with 3-4 years relevant experience in robotics research, integration, and development will be considered for a senior position
• Passionate in robotic navigation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in programming languages such as Python and C++, and/or other languages
• Proficient in robot programming using Robot Operating System (ROS) and Linux environment
• Proficient in software development in a collaborative environment using CI/CD tools
• Experience in one or more of the following domains will be preferred: Localisation, Mapping, Navigation, Machine Vision, Path Planning, Motion Planning, and/or Mission Planning
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

Company Overview:
Additive Inn is a dynamic and innovative 3D printing company based in Singapore. We specialize in prototyping, manufacturing, and design solutions. We seek a passionate and skilled 3D Printing Production Engineer/Technician to lead and grow our 3D printing production department.

Key Responsibilities:

• Department Development: Establish and manage a 3D printing production department, implementing efficient workflows and systems.
  Evaluate and procure 3D printers, materials, and accessories to enhance production capabilities.
  Collaborate with management to define production goals and KPIs.
  
• 3D Printer Maintenance & Operation: Operate and maintain various types of 3D printers, including FDM, SLA, SLS, and others as required.
  Troubleshoot and repair 3D printers to ensure minimal downtime.
  Perform regular calibration, cleaning, and upgrades on all equipment.
  
• Production Workflow: Prepare and optimize 3D models for printing using slicing software (e.g., Cura, PrusaSlicer, PreForm, etc.).
  Monitor printing processes to ensure accuracy, efficiency, and quality of output.
  Implement post-processing techniques (e.g., sanding, polishing, painting) where needed.
  
• Technical Expertise & Support: Provide technical support to clients and team members, addressing issues with designs, prints, or equipment.
  Identify and resolve challenges in production, including material compatibility and design feasibility.
  Maintain a log of issues, repairs, and solutions for continuous improvement.
  
• Documentation & Reporting: Document production processes, machine settings, and troubleshooting steps.
  Prepare reports on production performance and recommend improvements.
  

Requirements:

• Diploma or degree in Engineering, Manufacturing, or a related field.
• At least 1 year of hands-on experience with 3D printing technologies (FDM, SLA, etc.).
• Proficiency in slicing software such as Cura, PrusaSlicer, PreForm, or equivalent.
• Strong mechanical aptitude for troubleshooting and repairing 3D printers.
• Understanding of 3D modeling software (e.g., Blender, Fusion 360, SolidWorks) is a plus.
• Interest in continuous learning and staying updated with advancements in 3D printing.
• Ability to work independently and manage multiple priorities.

What We Offer:

• Opportunity to build and lead a dedicated 3D printing production department.
• Hands-on experience with cutting-edge 3D printing technologies.
• A collaborative and innovative work environment.
• Competitive salary and growth opportunities.

Join us at Additive Inn and be a pioneer in shaping the future of 3D printing production!

As a Senior Package Design Engineering (PDE) Central Engineering System and Analytics (CESA) Engineer, you will develop integrated solutions to empower Backend Operations to make data-driven and heuristics-based decisions. You will work across Global Operations and sites to improve Cost, Scale, Quality, and Cycle Time by defining and designing data architecture and collaborating with key partners.

Responsibilities

• Yield Enhancement (YE) lots analysisLead YE lot analysis including reconstructing fuse identififaction (FID) for traceability, statistic comparison for different group
  
• Yield modelling / pareto benchmarkingIdentify actionable opportunities from YE lots
  Develop and improve Yield Models for HBM
  Periodically improve models based on actual performance
  
• Best Known Methods (BKM) DeploymentDevelop BKM’s for YE and drive implementation
  Identify/align BKMs and monitor implementation
  Works with different teams in the identification of critical metrics

Requirements:

• PhD/Masters/Bachelors in Statistics, Mathematics, or a related field; advanced degree preferred.
• Minimum of 3 years of experience in semiconductor manufacturing or related fields
• Preferably with experienced in Package Design Engineering and Yield Enhancement
• Strong understanding and knowledge of semiconductor manufacturing processes and technologies.
• Proficiency in statistical/machine learning and statistical techniques skills will be additional advantageous;
• Experience in MRDA will be a plus
• Proven ability to make decisions, multi-task, and solve problems and address root causes.
• Exhibit critical thinking to see opportunities.
• Effective communication skills in verbal/written.
• Self-motivated. Able to work independently with minimal supervision.
• Able to travel as required to support department and company objectives.

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

• Managing and ensuring compliance with the security protocols and parameters, thus ensuring effective resolution of security incidents.
• Implementing IT Security programs (Firewall, SIEM Tools, and IAM).
• Managing IT Security & Operational Security Management, Data Loss Prevention, Identity Management, Access Control, and IT Audit Management, thus ensuring the protection organizational assets and confidentiality, privacy, and availability of information maintained by the organization.
• Designing & architecture of IT Infrastructure requirements as well as manage timely upgrade of the same, involving Disaster Management, Business Continuity, thereby enabling seamless IT Operations.

Requirement:

• Bachelor degree in Computer Science or IT related.
• 8+ years of exp as a Network Security engineer.
• Certification in Information Security Management (CISM) or related.
• Profound expertise in Project Management, having insightful experience in the execution/management of IT security projects.
• Comprehensive experience in Agile Scrum Methodology, with proficiency to advocate/adopt ‘Agile’ Principles and delivery through a Scrum framework.

IT Engineer

Job Scope:

• Set up cloud infrastructure for AWS or Azure
• Install and configure software and hardware for project testing.
• Liaise with customers to gather requirements.
• Produce design / test document in a project.
• Hardening windows and Linux system
• Manage network servers and technology tools
• Set up cluster server, VMware, and workstations
• Create and verify backups of data
• Monitor performance and maintain systems according to requirements
• Respond to security or usability concerns immediately
• Troubleshoot issues and outages
• Ensure security through access controls, backups and firewalls
• Upgrade systems with new releases and models
• Build an internal wiki with technical documentation, manuals and IT policies
• Upgrade systems and processes as required for enhanced functionality and security issue resolution
• Act as L2/L3 Support. Able to perform System recovery

Requirement:

• Experience as a IT Engineer, System Administrator, Network Administrator or similar role
• Experience with Windows Server, Group Policy, Virtualization, networks (LAN, WAN) and patch management
• Familiar with Terraform is a plus
• Knowledge of system security (e.g. intrusion detection systems) and data backup/recovery
• Resourcefulness and problem-solving aptitude
• Excellent communication skills
• Degree/Diploma in Information Technology, Computer Science or a related discipline; professional certification (e.g. Microsoft Certified Systems Administrator (MCSA) is a plus

System Installation & Programming

•Install lighting control systems based on design specifications and project requirements.

•Set up wiring and connections for control panels, dimmers, sensors, and other components.

•Program and configure lighting control systems to achieve desired lighting effects, energy efficiency, and user preferences.

•Customize control interfaces such as touch panels, mobile apps, or computer software to facilitate user-friendly operation.

Testing and Commissioning

•Conduct thorough testing of the installed lighting control systems to ensure proper functionality.

•Address any issues or discrepancies identified during testing.

•Commission the system to ensure it meets performance and design specifications.

Troubleshooting and Maintenance

•Diagnose and troubleshoot problems with lighting control systems.•

•Perform routine maintenance to ensure the continued reliability and performance of the system.

•Respond promptly to service calls and address issues in a timely manner.

Documentation:

•Maintain accurate records of system configurations, programming codes, and any modifications made during installation or maintenance.

•Provide documentation and training for end-users on how to operate and troubleshoot the lighting control system.

Customer Support:

•Provide technical support to end-users and address any inquiries or issues they may have.

•Offer recommendations for system upgrades or improvements based on evolving needs.

Job Description:

• To co-ordinate and correspond with sub-contractors, suppliers and consultants
• Attending site meetings
• Planning, scheduling and monitoring work progress
• Supervision of construction progress and quality checking
• Prepare monthly progresss report and progress claim
• Supervise all structural and civil works and attend all meetings and co-ordination with sub-contractors.
• Liaise with client’s consultants, RE and etc.
• Prepare and plan work schedules.
• Maintain and monitor quality controls.
• Conduct daily field inspections of all work under construction.
• Ensure workers maintain a clean construction site at all times.
• Prepare job closing inspection reports for completed construction.
• Establish inventory control methods and procedures to ensure availability.
• Co-ordinate all matters pertaining to compensation insurance for labour and take necessary steps to maintain lowest possible rate
• Other administrative duties and ad-hoc assignments as required.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.

JOB SCOPE:

· Implementation and manage in house IT and/or Project’s IT requirement and implementation, with higher emphasis to Cloud related Infrastructure.

· Setup and maintenance of cloud services (GCC, AWS, Azure, Google Cloud, etc).

· To be involved in Cloud architecture design.

· Review technical design, identify Security Vulnerabilities, and provide necessary recommendation to improve overall Security.

· Prepare and submit Project IT and IT Security documents.

· Prepare and submit of Test & Commissioning documents related to IT Security.

· Oversea or Lead the Testing & Commissioning of IT System and Security Testing.

· Perform IT security hardening and mitigation when applicable.

REQUIREMENT:

• Degree in Information Technology or Computer Science or a related discipline;

• Excellent knowledge on Cloud setup, which includes but not limited to AWS, Azure and Google Cloud.

· Good knowledge in IT, IT Security and Network.

• Resourceful and problem-solving aptitude.

• Excellent communication skill.

• Working experience in IT Infrastructure, IT security and Network implementation.

• Experience with Windows Server, Active Directory, SCCM, Endpoint Configuration Manager, Group Policy, Virtualization (vmware/hyper-v), networks (LAN, WAN) and patch management.

• Good Knowledge of system security (e.g. Firewall, Intrusion Detection Systems etc) and data backup/recovery.

• Professional certification in IT and IT Security is a plus.

• Proven leadership in managing IT team is a plus.

• Proven experience in Government Computing Cloud is a strong plus point.

• Familiar with terraform would be a strong plus point.

Job Responsibilities:

• Technical support including full range of enterprise products, network technical solution, highlights proposal and etc.
• To handle clients’ inquiries and technical related issues.
• Collaborate with the team and others to identify, troubleshoot and find resolutions for technical problems.
• Responsible for new product test
• Promote solutions and deliver formal technical proposals / presentations to clients.
• Complete other tasks assigned by leaders and management.

Job Requirements:

• Experienced in networking product like Switch, Wireless Access Point, Router and other networking related product.
• Good knowledge in the fields of Business Network system such as Gateway, Switch, AP and IP CCTV.
• At least 2 years work experiences on Business Network domain or technical domain.
• Ability to speak in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters
• Experienced in handling and troubleshoot technical issues.
• Possess CCNA/CCNP and other networking certificate would be an added advantage.

Job Title: Patient Service Executive / Network Clinic Coordinator

Responsibilities:

· Support United Primary Care Network (PCN) recruitment, onboarding, and training of GP Partners.

· Promote GP engagement, attend to their enquiries and support them in Healthier SG (HSG) drive.

· Work closely with GPs for PCN and HSG enrolment of chronic and well patients

· Liaise with the service providers or GPs in arranging provision of ancillary services by PCN/HSG

· Support GPs in better integration and coordination with various social partners and institutions

· Provide administrative support to GPs on patient referral to community and social partners, such as Active Aging Centres (AAC), Day Care, Home Care services etc.

· Support the compliance of GP partners with audit requirements of the PCN program.

· Establish feedback management from MOH/AIC to GP partners and vice versa.

· Support the admin team in administering surveys and collating data for analysis and reporting.

· Share Clinic Performance Management to GP partners.

· Assist Nurse Counsellors to provide basic counselling to patients on their care plan compliance and lifestyle modification as required.

· Perform adhoc duties assigned by the Head of PCN.

Job Requirement:

· GCE O Level/ Diploma Holder/ Degree Holder.

· Relevant work experience in healthcare would be an added advantage.

· Ability to work as a team player and independently with minimal supervision.

· Meticulous and able to keep proper and timely documentation of HSG/PCN records, database and quality-related reports.

· Competent in MS Office, in particular MS Excel.

Job Description:

• Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure).
• Assists in the coordination of various teams testing and evaluating for the development of design and its implementation of the best output.
• Installs, configures, and tests operating systems, application software, and system management tools.
• Ensures the highest level of systems and infrastructure availability.
• Evaluates the existing systems and provides the technical direction.
• Plans and implements system automation as required for better efficiency.
• Deals with work process, optimization methods, and risk management tools in the given projects for the successful accomplishments according to the requirements of the stakeholders.

Experience:

• Computer science degree
• Scripting and programming proficiency
• OS and Network experience
• Certification may be helpful

· Ability to present ideas in business-friendly and user-friendly language appropriate to both executive and managerial audiences.

· Ability to effectively manage relationships with other implementation teams, application teams, stakeholders, business and customer representatives.

· Organizational skills with attention to task details, documentation and target dates.

· Strong written, oral, and interpersonal communication skills.

· Team orientated, willing to share knowledge and collaborate with peers.

· Proven analytical, strategic vision drawing on strong problem-solving abilities.

· Able to prioritize and execute tasks in a high-pressure environment. ·Ability to conduct research into server, storage, virtualization issues, standards, and products.

Requirement:

· VMWARE Cloud, Virtualization, Server and Storage vendor Certifications Preferred.

· 10+ years of previous Implementing / Architecting & virtualization experience, across multiple vendor and technologies.

· In-depth understanding of Cloud, Server, Storage, and Virtualization architecture design techniques, theories, principles, and practices.

· Solid experience in implementing enterprise Cloud, Virtualization, Server and Storage systems within a broad spectrum of technologies.

EDUCATION/CERTIFICATION / KNOWLEDGE:

· Excellent Knowledge of Private, Public and Hybrid Cloud environments

· Excellent Knowledge of Cloud Orchestration platforms

· Intermediate knowledge of Windows Server, Linux, in HA/DR type configurations.

· Excellent knowledge of Sever hardware platforms: x86

· Excellent knowledge & working experience of VMWare ESXi, vSphere, vSAN, vRA, VRO, VROPs, vRLI, NSX-T, Horizon View

· Excellent knowledge of SAN, NAS, DAS, RAID, SCSI, Fibre Channel, Backup to Disk, clustering, encryption technologies from multiple vendors.

· Should be extremely proficient in PowerShell, Shell scripting / Python / Ansible development

Job Responsibilities:

• Develop and implement maintenance schedules for machinery and equipment.
• Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
• Conduct routine inspections and preventive maintenance to optimize machinery performance and extend equipment lifespan.
• Liaise internally between operations teams to address machinery breakdowns and operational concerns.
• Coordinate data collection on auxiliary materials from operations teams and report accordingly.
• Manage receipt, maintenance, and monitoring of machinery parts inventory.
• Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.
• Undertake additional tasks as required to support operational needs and project requirements.

Job Requirements:

• Bachelor's Degree in Mechanical or Mechatronics Engineering or Equivalent.
• Preferably with at least 3 years of working experience dealing with machinery.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

• Expertise/ working/ practical knowledge of containerization platforms – particularly openshift
• Working/ practical knowledge of operating environments & platforms – virtual machines, Linux, Windows; databases – MariaDB. MSSQL; application/middleware/web servers – jboss, ssh, apache, tomcat, kong, nginx
• Fundamental understanding of networking – network load balancing, DNS
• Working/ practical knowledge in security – server / os hardening, ssl, network vulnerability assessments, penetration testing; component security
• Troubleshooting; technical advisory/ consultations; project status reporting; organize calls with partners
• Work in multicultural & multiracial environment
• Occasional (rare) overtime

JOB DESCRIPTION:

Plan, schedule, organize and co-ordinate site installation works of security and communication and related systems projects, which include;

• Planning and scheduling of site installation works;
• Monitor site installation progress of sub-contractors, prepare progress reports,
• Attend site and co-ordination meetings, and technical meetings, prepare site documentation
• Plan equipment installation schedules, and schedule system testing and interfacing works
• Reports to the Project Manager and assist in carrying out specific site related tasks.

Qualifications:

• Polytechnic Diploma/ Degree/ Master in Civil Engineering/Construction
• At least 2 years of relevant working experience
• Good team player, able to lead and multi task
• Excellent interpersonal and communication skills
• MS Office skills – Excel/Words/Powerpoint

Philips is a global leader in health technology, committed to improving billions of lives worldwide and striving to make the world healthier and more sustainable through innovation. Driven by the vision of a better tomorrow.

But it’s not just what we do, it’s who we are. We are 80,000, wonderfully unique individuals, with two things in common. An unwavering sense of purpose and a relentless determination to deliver on our customers’ needs. It’s what inspires us to create meaningful solutions – the kind that make a real difference – when it matters most.

The world and our customers’ needs are changing faster than ever before and while we are proud of what we do already, we know we can do more. That’s why we need you, to help us tackle increasingly complex challenges posed by ever evolving health and well-being needs.

In this role, you have the opportunity to make life better

Looking at the challenges the world is facing today Philips’ purpose has never been more relevant. So whatever your role, if you share our passion for helping others, you’ll be working towards creating a better and fairer future for all.

You are responsible for

MR portfolio

• Perform corrective maintenance, supported when necessary by tier-2 support helpdesk
• Demonstrate commitments to meet customer needs and requirements by ensuring all given quality standards
• Submit timely and accurate service data, job sheets, reports, expense claims, radiation film badges, field problem reports and other paperwork as assigned
• Be aware of customer needs and potential commercial leads (Philips Lifecycle Solutions – PLS) through customer visits and provide feedback and recommendations to the management, relevant people within the organization
• Support the District Customer Services & Operations Manager and the Customer Services Account Manager as appropriate with contract renewals etc.
• Use company property with care to ensure optimal results with minimal operational costs
• Keep abreast of new technologies likely to affect PH range of products
• Be a professional representative for PH with respect to customer problems, ensuring personal acceptability by the customer in appearance and behavior in accordance with PH policy and targets
• Accuracy of service records with particular attention to test & inspection results
• Adopting appropriate ESD control while servicing PH equipment
• Usage of appropriate electronic measurement equipment in calibration controlled cycle
• Responsible for reporting identified device safety issues according to applicable PH quality standard policy
• Responsible for reporting customer feedback according to applicable quality standard policy and follow up relevant assigned quality & regulatory training in a timely manner

To succeed in this role, you’ll need a customer-first attitude and the following

• Diploma/Degree in Biomedical or Electronics Engineering or equivalent
• At least 3 years of working experience in service or engineering roles, preferably in the medical device industry
• Good troubleshooting skills
• Good communication and interpersonal skills

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

• OS Expertise: Extensive experience in troubleshooting and supporting Windows 10/11 operating systems.
• Image Creation and Deployment: Experience creating, maintaining, and deploying OS Images in a large enterprise environment.
• Endpoint Management: Proficiency with endpoint management tools such as Microsoft SCCM, MDT, Intune, or similar.
• Security Practices: Strong knowledge of endpoint security best practices and implementation.
• Technical Understanding: In-depth understanding of Active Directory, Group Policies, Networking, and Endpoint Security.
• Scripting and Tools: Experience with PowerShell, command-line scripts, and SysInternals tools.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects