Installation, commissioning and modification of marine switch boards and systems

Breaker calibration and testing.

Handling projects as requested by ship yard.

Testing and servicing of devices listed below

Gauges as well as transmitters for Temperature and pressure (VDO).

Safety devices for generators such as over current protection relays, reverse power protection relays (Omron, DEIF, and Crompton).

Panels such as engine alarm panel, fire alarm panel and bilge alarm panel.

Electrical instruments such as Voltmeter, ammeter, frequency meter, power factor meter & kilo wattmeter (DEIF, & selco).

Switchgears (Mitsubishi, Terasaki, Merlin gerin, & Siemens).

Testing, trouble shooting and upgrading the following panels

Diesel and shaft Generators(Caterpillar and Cummins)

Main and emergency switch boards

Generator set control panels

Fire detection system

Tank alarm system

Cranes

Navigation lights

Motors

Starters including variable drives and soft starter.

Primary Objective:

Assist the Head of Internal Audit in discharging its responsibilities by performing independent review to ensure :-

•    Soundness and adequacy of governance, risk management and internal control system
•    Compliance with statutory and regulatory requirements as well as internal policies and guidelines.
•    Coordinate and supervise audit assignments to ensure timely completion and efficient execution.  
•    Provides consultative role in review of proposal papers for development of new and variation to the existing Islamic banking products & services as well as new and enhancement of framework, policies and guidelines to ensure the necessary control features are incorporated.

Key Responsibilities:

•  Coordinate annual risk assessment exercise of all the operating units under the purview of this section for establishment of annual audit plan.
•  Plan and supervise the execution of risk-based audits as per annual audit plan established.
• Review audit scopes and audit programs for execution by audit team to ensure audit objectives are met with adequate coverage.
• Review draft audit findings and works performed by audit team to ensure issues raised are appropriate and valid for audit discussion.
• Attend audit exit discussion with the respective Head of BG/FG & BA/FA to discuss audit issues as well as recommendations to improve system of internal control
• Review and finalize audit reports for sign off by Head of Internal Audit and Functional Group Head, RHB Bank Singapore
• To provides value-added service through recommending the key controls required in review of proposals for new and variation to existing Islamic products and services, new and enhancement to existing policies and guidelines.
•  Train, coach, motivate and provide guidance to the staff in the section.
• Assist Head of Internal Audit in supervising and ensuring smooth operations of IAD

We are seeking a highly motivated Research or Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. If you are independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges, this is the role for you.

JOB DESCRIPTION

• Develop, test, and maintain enterprise planning systems and applications.
• Analyze complex problems related to resource planning and scheduling, identifying potential solutions, and implementing the most effective one.
• Collaborate with other developers and stakeholders to deliver high-quality software products.
• Deploy software to production environments and provide ongoing maintenance and support to customers.
• Take responsibility for documenting code with technical specifications, user manuals, and other documentation to facilitate understanding and maintenance by other team members.
• Identify and address bottlenecks, inefficiencies, and scalability issues to ensure optimal performance of the software system.

JOB REQUIREMENT

• Bachelor's or Master's Degree in Computer Science or Engineering or relevant disciplines.
• Minimum of 8 years of working experience as a Software Developer/Engineer
• Hands-on experience in Cloud Native Technologies such as microservices, DevSecOps, and Container Platforms
• Proficiency in designing and developing microservices using at least one programming language, preferably C# .NET, Java, or Python
• Good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)
• Can-do attitude and willingness to interface with multiple stakeholders.
• Excellent troubleshooting, follow-through, and problem-solving skills, with attention to detail.
• Excellent verbal and written communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for an individual to join us as a Senior Software Engineer (familiar with UX, Accessibility), as a 2 year contract employee. This person will need to have a strong front-end development background and deep knowledge of accessibility (A11Y) standards to join our team.

In this role, you will play a crucial role in ensuring that our web and mobile interfaces meet and exceed accessibility guidelines, enabling users of all abilities to interact seamlessly with our products. You will be at the intersection of design and development, rapidly prototyping and implementing user-centric solutions that are both technically sound and visually compelling. You will collaborate closely with a lean team of designers, speaking their languages fluently to translate design concepts into functional, elegant interfaces that are not only innovative but also optimized for performance.

A brief summary of your job responsibility:

• Develop and implement accessible front-end code that meets WCAG (Web Content Accessibility Guidelines) 2.1 standards and beyond. Ensure accessibility across various platforms and devices, catering to users with visual, auditory, motor, and cognitive disabilities
• Build responsive, high-performance interfaces that are both functional and aesthetically pleasing while keeping accessibility in focus.
• Regularly audit and review the codebase to identify and fix accessibility issues. Use tools like screen readers, keyboard navigation, and assistive technologies to perform manual and automated accessibility testing.
• Collaborate closely with designers to translate their vision into functional code and that accessibility principles are considered from the initial design phase
• Balance design aesthetics with technical feasibility and performance
• Participate in user research and usability testing to inform design decisions
• Act as a bridge between design and development teams, ensuring clear communication and alignment on project goals and deliverables
• Continuously update yourself with the latest trends, tools, and technologies in UX design and frontend development, bringing new ideas and innovations to the team

To succeed in this role, you will ideally have:

• Strong expertise in front-end development with a focus on accessibility, including experience with HTML, CSS, JavaScript, and ARIA
• In-depth knowledge of WCAG 2.1 (Web Content Accessibility Guidelines)
• Proven experience in rapid prototyping and delivering high-fidelity prototypes that can be quickly tested and iterated
• Experience conducting accessibility audits and testing
• Familiar with design principles with the ability to think like a designer when needed, while also being deeply aware of the limitations and opportunities within frontend development
• Familiar with the latest frontend frameworks, systems, and best practices, with a focus on delivering user-centric solutions
• Excellent collaboration skills, with the ability to communicate effectively with both design and development teams
• A user-centric mindset, with a passion for creating products that delight and engage users
• Experience participating in design activities and workshops, contributing to the overall UX vision and strategy
• Strong problem-solving skills, with the ability to navigate complex challenges and propose creative solutions

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions! The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.
  

We are seeking a highly motivated Research or Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. If you are independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges, this is the role for you.

JOB DESCRIPTION

• Develop, test, and maintain enterprise planning systems and applications.
• Analyze complex problems related to resource planning and scheduling, identifying potential solutions, and implementing the most effective one.
• Collaborate with other developers and stakeholders to deliver high-quality software products.
• Deploy software to production environments and provide ongoing maintenance and support to customers.
• Take responsibility for documenting code with technical specifications, user manuals, and other documentation to facilitate understanding and maintenance by other team members.
• Identify and address bottlenecks, inefficiencies, and scalability issues to ensure optimal performance of the software system.

JOB REQUIREMENT

• Bachelor's or Master's Degree in Computer Science or Engineering or relevant disciplines.
• Minimum of 6 years of working experience as a Software Developer/Engineer
• Hands-on experience in Cloud Native Technologies such as microservices, DevSecOps, and Container Platforms
• Proficiency in designing and developing microservices using at least one programming language, preferably C# .NET, Java, or Python
• Good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)
• Can-do attitude and willingness to interface with multiple stakeholders.
• Excellent troubleshooting, follow-through, and problem-solving skills, with attention to detail.
• Excellent verbal and written communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review Architectural drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Degree in Civil/Structural Engineering.
• Minimum 5 years Site/Working Experience.
• Good Organizational and planning skill.
• Able to work independently and as a team.
• Candidates with Marine Project experience preferred.

Requirement:

• Strong technical aptitude and the ability to understand and explain complex products and solutions
• Excellent communication and interpersonal skills, with the ability to build and maintain relationships with customers
• Problem-solving skills and the ability to think creatively to overcome challenges
• Strong negotiation and presentation skills
• Proficiency in Microsoft Office Suite and customer relationship management (CRM) tools
• Willingness to travel within the region as needed

Job Description:

• Proactively identify and pursue new sales opportunities within your assigned territory
• Develop and execute targeted sales strategies to meet and exceed sales targets
• Provide technical expertise and support to customers, ensuring their needs are met
• Collaborate with cross-functional teams to deliver seamless customer experiences
• Continuously monitor market trends and competitor activities to identify new avenues for growth
• Maintain accurate records of all customer interactions and sales activities
• Represent the company at trade shows, conferences, and other industry events

Inspection Engineer (Tankage)

Job Description:

Inspection on various tanks such as basic repair and maintenance.

Performed regular inspections to ensure Quality Assurance on the various installed materials in the facility.

Manage the inspection process regularly by determining the corrosion rate.

Perform internal/external inspections on storage tanks and to generate reports with repair recommendations.

Monitor the tank inspections on regular intervals.

Performed various quality assurance procedures on the tanks.

Maintain records of all inspection process carried in both hard copies as well as electronic copy.

Perform inspection asper various quality assurance procedures on the tank’s asper client criteria.

Perform internal and external inspections to determine if it meets the acceptance criteria of a specific code, standard or document.

Properly interpret regulations, codes, and industry standards.

Computer usage to compile and submit daily reports, inspection reports, and inter-office communications.

Pay attention to detail and be capable of recommending and approving repairs as well as performing visual inspection of completed work.

Maintains a positive relationship between client, facility, and customer; and promote a positive attitude towards co-workers.

Compile and submit completed inspection reports in a timely manner.

Inspection of various storage tanks in accordance with API inspection codes and Recommended practices asper API- 620, 650 and 653.

To provide technical expertise on all NDT matters as required on projects.

Qualifications:

Degree in any related engineering/science field from a recognized university

Candidates with a Diploma in Mechanical Engineering, preferably with more than 15 years of experience in the petrochemical industry working in fixed equipment or inspection related areas

Knowledge of materials selection, Non-Destructive Examination techniques, welding, and risk-based inspection procedures, would be an advantage

Familiarity with major API codes and specially API 650 for tankage will be an added advantage

Knowledge and ability to use computer programs such as MS Office, etc.

Willingness to work extended hours, not afraid of heights and working in confined spaces

A team player with strong communication and interpersonal skills

Capable of effectively driving milestone planning for Equipment Strategy development with key members from various functions

Candidates having work experience with ExxonMobil will be prioritized.

Job Description:

• Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units
• Actively involved in job estimation and WIP (Work-In-Progress) tracking
• Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems
• Manage and supervise the Maintenance, Repair & Overhaul (MRO) tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary products
• Deliver allocated and ad-hoc tasks within stipulated timeline and cost
• Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost
• Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations
• Submit investigation reports to relevant authority for approval
• Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained
• Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components
• Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible
• Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts
• Perform other related duties as assigned

Job Requirements:

• Degree in Mechanical/ Mechatronic Engineering
• Experience in Component MRO in related industries
• Experience in effectively leading a team of Technicians
• Experience in SAP System is advantageous
• Knowledge in Army systems will be an added advantage
• Ability to read and interpret schematics and datasheets
• Strong technical skills in troubleshooting Engine, Transmission or Gearboxes
• Competent in Mechanical/Mechatronic system
• Familiar with components testing
• Ability to read and interpret Engineering Drawing and datasheets
• Good communication skills and a strong team player
• Able to work under pressure and tight timeline
• Good analytical and problem-solving skill
• Able to read Manual and Engineering Drawing for any re-engineering work required

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Job Description

The Quality Assurance Engineer is responsible to ensure that all products, processes, methods and equipment are validated and is the quality representative in Quality improvement projects. He/She handles external customer complaints and change management business processes. The QA Engineer expected to lead and drive cross functional team in day-to-day issues, global bench marking activities, internal process robustness and automations. He/She must be inclined to have hands-on understanding of tool and product functionality and production.

In this role, you will have the opportunity/responsibility to:

• Continuous improvement of Core Value Drivers and KPI’s in support of quality and business growth through the rigorous deployment of DBS tools
• Manage CAPA & 8D processes; assure root cause analysis and effectively implement robust CAPA in a timely manner. Follow-up and verification of CAPAs to assure no recurrence. Adhere to corporate escalation and reporting guidelines
• Strong focus on variation reduction using data driven approach and automotive core tools such PFMEA, Capability analysis/SPC. MSA etc.
• Proactively identify leading key Indicators and provide Manufacturing Quality Trend Charts/Analysis and suggest/implement improvements based on the trends.
• Support QMS to meet ISO 9001 requirements. Perform Internal Audits per the annual audit schedule, prepare report, follow-up and verification of completion of actions initiated from audit(s)
• Evaluates work methods, procedures and policies. Tracks progress of qualification status and reliability results & determine disposition of non-conforming processes.
• Lead and Support People engagement initiatives both site and global
• Drive efficiency, automation and digitalization in production & QM methods

The essential requirements of the job include:

• Minimum Bachelor’s degree in Engineering/Science
• Min 5 years relevant working experience in manufacturing with 3 years in Quality Control/Assurance in Semiconductor, Electronics or Automotive Manufacturing.
• Solid understanding of quality tools and methods. (FMEA, Control Plan, SPC, 5Why, FTA, 8D, 6 Sigma, Minitab/JMP)
• Certified Quality Engineer or Certified Lead auditor with thorough understanding of ISO 9001 2015 requirements
• Excellent English communication and Interpersonal skills.

It would be a plus if you also possess previous experience in:

• Previous exposure to the Manufacturing sector.
• Excellent problem-solving and analytical skills.
• Analytical and data visualization skills eg Tableau, Qlikview
• Lean / Kaizen proficiency/ black belt proficiency a plus

Company:

Sopra Steria is a listed European tech leader specializes in Consulting, Digital Service, and Software. We have 60,000 employees worldwide located in different regions (Europe, North America and Asia), whereby Singapore is the HQ for APAC. EvaGroup Asia Pacific is part of Sopra Steria I2S APAC, in charge of Infrastructure, Cloud and Cybersecurity services.

Responsibilities:

Managing and Operating Red Hat Platform Operations Day 2:

• Red Hat Enterprise Linux
• Red Hat Identity Management
• Red Hat Satellite
• Red Hat Ansible Automation Platform
• Installation/Configuration/Hardening/Maintenance/Patching
• Maintain System Security
• Advanced Troubleshooting
• Performance Tuning
• Capacity Management
• Preventive/Proactive Support
• Incident/Change/Problem Management

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Minimum 3 years of hands-on experience with Red Hat Enterprise Linux administration.
• Familiarity with security tools and protocols in a Linux environment.

Preferred Qualifications:
Red Hat Certified Engineer (RHCE) or Red Hat Certified System Administrator (RHCSA).

Established in 2017, QCP is one of the first digital asset trading firms in Singapore, with a vision to partner the next generation of investors to unlock institutional opportunities in digital assets. 

QCP brings to clients deep expertise gained from thriving through multiple market cycles. A global market maker in digital asset derivatives with a vast network of liquidity providers and counterparties, we are shaping the future of digital asset markets through greater access and efficiency. 

We offer a range of tailored derivatives and spot trading as well as structured solutions to institutional, professional and accredited investors. We also provide 24/7 liquidity across various markets in partnership with various exchanges and platforms. 

QCP is headquartered in Singapore and is supported by a strong team of professionals in trading, business development, operations, risk and compliance teams.

Our in-house publications track the constantly evolving state of digital assets and markets, and can be accessed on our Telegram (t.me/QCPbroadcast), website (qcpgroup.com), Twitter (@qcpgroup) and LinkedIn.

Responsibilities

As an Entry-Level Cloud Engineer at QCP Capital, you will play a key role in supporting the design, implementation, and maintenance of our AWS infrastructure. You will be part of the Technology Operations team, reporting to the Head of Technology, and will work closely with cross-functional teams to ensure our cloud-based systems' availability, scalability, and security. This is a great opportunity for a recent graduate with a passion for cloud technologies to gain hands-on experience and grow their skills in a dynamic and fast-paced environment.

• AWS Infrastructure Management
• Assist in the design, deployment, and maintenance of scalable and highly available AWS infrastructure.
• Support the implementation and management of AWS services such as ECS, EC2, S3, RDS, Lambda, Networking, and others as needed.
• Monitor and optimize resource usage, performance, reliability, and costs.
• Monitor and improve AWS network performance.
• Security and Compliance
• Participate in regular security assessments and audits to ensure compliance with industry standards.
• Work closely with the security team to assist in responding to and remediating security incidents.
• Support efforts to enhance cloud infrastructure and data protection following Well Architected Framework principles.
• Automation
• Develop basic infrastructure as code (IaC) using tools such as Terraform, CloudFormation, or the Cloud Development Kit (CDK).
• Learn to implement automation scripts to streamline routine tasks and improve operational efficiency.
• Assist in setting up CI/CD pipelines.
• Monitoring and Alerting
• Help set up and configure monitoring and alerting systems to proactively identify and resolve issues.
• Collaborate with other teams to respond to and resolve incidents.
• Collaboration
• Work closely with development and production teams to ensure seamless integration of cloud services.
• Provide technical support and assistance to team members and stakeholders as needed.

• Bachelor's degree in Computer Science, Computer Engineering, or a related field.
• 0-2 years of experience in cloud engineering, software development or related fields.
• Experience with programming languages (e.g., Python, Bash) is mandatory.
• Experience with docker and containerization is a plus.
• Good understanding of Networking.
• Familiarity with infrastructure as code tools (Terraform, CloudFormation, CDK) is a plus.
• Knowledge of CI/CD pipelines, cloud architecture, security and DevOps practices is an advantage.
• Strong problem-solving skills, eagerness to learn, and excellent communication skills.
• Able to work independently.
• Interest in building a career as a Cloud Engineer with a focus on AWS.
• AWS certifications (e.g., AWS Certified Solutions Architect, AWS Certified Developer) are an added bonus, but not required.

The Environment We Offer

As a growing firm with a tightly-knit team, we respect and listen to all our employees. You will get the chance to make an impact by having your voice heard by everyone, including the management.

Our employees enjoy a high level of autonomy at work. We focus on substance, not form - as long as you can perform, you will be recognized and rewarded. We are also dedicated to supporting our staff and ensuring they develop holistically to maximize their potential in the long- term.

We also provide flexible working arrangement as required and a casual and fun environment to boot!

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

This position is ideal for a recent graduate who is passionate about solving challenging business problems and building applications that provide an excellent user experience. As a Data Engineer, you will be an integral part of the Loyalty and Marketing development team, focusing on designing and building software solutions that leverage data to solve business problems.

The role is for a self-motivated individual with strong foundational software engineering skills. The candidate will be extensively involved in hands-on activities, including POCs, design, documentation, and development of new functionality. The candidate must be flexible and willing to switch tasks based on the team's needs.

Responsibilities:

• Assist in the design, development, and implementation of software solutions.
• Participate in the development of new products iteratively by building quick POCs and converting ideas into real products.
• Design and develop mission-critical systems, delivering high-availability and performance.
• Interact with both business and technical stakeholders to deliver high-quality products and services that meet business requirements and expectations while applying the latest available tools and technology.
• Develop code under the guidance of senior developers to ensure deliverables are on time, within budget, and with good code quality.
• Maintain a passion for delivering zero-defect code and contribute to ensuring the team's deliverables meet or exceed the prescribed defect SLA.
• Assist in coordinating Continuous Integration activities and other related items in addition to contributing core product code.
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner.

Job Description:

· Developing and managing operational activities, including the monitoring of Workplace Safety and Health (WSH) strategies, and overseeing manpower, financial and resource plans.

· Day to day repair and maintenance job arrangement and yard operation management.

· Manage cost, quality and schedule, as well as health, safety and environmental activities for the site.

· Maximise productivity within the maintenance environment through sound scheduling and planning.

· Supervision the office team and review the job card and overtime to ensure all jobs are recorded and billed accordingly.

· Review invoices, quotation and efficiency of workers in perform their repair works.

Requirements:

· Minimum 2-3 years experience in heavy machinery industry.

· Technically background of Heavy machineries.

· Strong analytical and problem-solving abilities.

· Excellent communication and interpersonal skills.

Operations

· Reporting to the Head of Operations, ensure smooth day to day running of the training centre.

· Lead a team of operations executives in process planning and execution.

· Take up Management Representative role for audits.

· Make operational decisions on the go.

· Train new comers on job demands.

· Ensure all binding obligations to SSG (SkillsFuture Singapore) and MOM (Ministry of Manpower) are met.

Training

· To take care of facilities of the training center.

· To liaise with trainers to ensure smooth documentation flow pre and post training.

· To maintain ISO29990 Standards of the training center.

· To maintain OSHA18001 Standards of the training center.

· To manage all training equipment and liaise with contractors for repairs and servicing.

· To manage Training Management System (TMS) within the training center.

· To perform scheduling task of trainers.

· To manage all training materials and ensure security of training materials.

Requirements:

· Must have a passion for the industry and leadership qualities to lead a team of executives.

· Understand the WSQ (Singapore Workforce Skills Qualifications) system and/or having ACTA/ACLP will be an advantage.

· Diploma and above qualifications.

· Good presentation and people skills.

· Driven and motivated.

Job Description:

· Developing and managing operational activities, including the monitoring of Workplace Safety and Health (WSH) strategies, and overseeing manpower, financial and resource plans.

· Day to day repair and maintenance job arrangement and yard operation management.

· Manage cost, quality and schedule, as well as health, safety and environmental activities for the site.

· Maximise productivity within the maintenance environment through sound scheduling and planning.

· Supervision the office team and review the job card and overtime to ensure all jobs are recorded and billed accordingly.

· Review invoices, quotation and efficiency of workers in perform their repair works.

Requirements:

· Minimum 2-3 years experience in heavy machinery industry.

· Technically background of Heavy machineries.

· Strong analytical and problem-solving abilities.

· Excellent communication and interpersonal skills.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Job Descriptions

• Thoroughly review and understand bidding employer’s requirement documents, project specifications, and process data.
• Translate employer requirements into effective contractor solutions that align with project goals.
• Propose T&I proposal and support project execution.
• Assign work to In-House design team. Timely provide technical proposal or solution to project operation team.
• Liaise and communicate with project stakeholder for technical clarification and conclusion.
• Technical support for SFE Vessel operation and maintenance.
• Support engineering budget (estimation) and cost control.

Requirements

• Bachelor Degree in Civil Engineering / Naval Architect
• Min 10 years of related working experiences in offshore structure design and installation such as offshore platform, jacket and foundation.
• Preferably have experience with Wind Farm T&I.
• Familiar with offshore industrial standards and codes.
• Familiar with engineering design tools and software.
• Able to work in a team.

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

The Project Engineer will execute projects related to Building Management Systems (BMS) and Power Monitoring Systems (PMS) for commercial, industrial, and hospitality sectors. The ideal candidate will have a strong technical background, excellent project management skills, and a passion for delivering high-quality solutions.

Key Responsibilities:

Project Execution:

1. Manage BMS and PMS projects from conception to completion.

2. Coordinate with clients, contractors, and internal teams.

3. Ensure projects meet technical requirements, timelines, and budget, ensuring customer satisfaction.

Technical Expertise:

1. Design, configure, and commission BMS and PMS systems.

2. Troubleshoot and resolve technical issues.

3. Stay updated on industry trends and emerging technologies.

Project Planning and Management:

1. Develop project plans, schedules, and resource allocation.

2. Conduct site surveys and assessments.

3. Prepare and manage project documentation.

Collaboration and Communication:

1. Work closely with sales, engineering, and operations teams.

2. Communicate effectively with clients, stakeholders, and vendors.

3. Provide technical support and customer trainings.

Quality Assurance and Safety:

1. Ensure compliance with industry standards, regulations, and company policies.

Requirements:

Education:

- Diploma in Electrical Engineering, Mechanical Engineering, Building Engineering Services or related fields.

Experience:

- 1-2 years of experience in BMS, PMS, or related industries is preferred but not mandatory

- Proven track record in project execution and management is preferred but not mandatory

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

• Salary up $4500
• Main Con
• West Area
• 8am to 5pm

Responsibilities:

• Review project specifications, technical clarifications and construction drawings.
• Carry out construction works scheduling, material requisition, cost control, project supervision and documentation to ensure compliance to regulatory.
• Co-ordinate with the Structural, Architectural and M&E staff to resolve related problems and issues.
• To perform QA / QC role on area assigned
• Assist project manager in planning and execution of project plans at site

Requirements:

• Degree in Civil Engineering and PEB recognized degree
• Candidate without experience are welcome to apply

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

EA Reg. No: R1222284 | Kelvin Soh

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for FP & Plumbing system installation and troubleshooting on site
• Prepare material requisition for all FP & Plumbing equipment and materials
• Prepare work programme for FP & Plumbing works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of FP & Plumbing system, including detailed design, calculation, shop drawings, pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with FP & Plumbing suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for FP & Plumbing system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all FP & Plumbing equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling FP & Plumbing works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in FP & Plumbing design calculations and Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage