Responsibilities

Provide Leadership to the Electrical engineering team to comply with project requirements and to meet project schedules.
Lead and prepare overall concept.
Lead, prepare, & review Request for Quotations (RFQs) and specifications. Lead EPC tender as the lead for Electrical.
Review technical proposals from OEMs to ensure compliance to our design requirement.
Plan & Manage the Electrical Master document List.
Plan & Manage manpower loading.
Review cable routing, BOQ, lead engineers and drafters.

Lead the engineering design of the following activities:
Design of 230kV, 66kV, 6.6kV & LV power supply system including; Sizing of Power Generation System, transformer, UPS & DC systems.
Articulate the overall Single Line
Understand & explain Power system Analysis by ETAP
Understand & explain Protection coordination
Calculate Cable Size
Understand & explain HV, MV and LV distribution & motor starter system
Understand & explain UPS & DC system
Understand & explain Solar generation system
Understand & explain Power Management System
Plan & coordinate Electrical Room layout
Understand, explain, plan & coordinate Cable and Busduct Management System

Familiar to the following Equipment and System;
Steam/Gas turbine generator
EDG (Emergency diesel generator)
GCB/TCB/UCB
GSUT/UAT/AT
MV/LV VSDs
IPBD/SBPD/LV Busduct
HV/MV/LV Switchgear and MCC
Civil interface for switchboard installation, pull pit and penetration.

Requirements

At least 10 years of relevant experience as Leader or Senior Electrical Engineer in EPC project for Power, Petrochemical and/or Waste-to-Energy plants
Bachelor’s degree in electrical engineering or equivalent
Strong background in EPC projects Strong leadership & people management
Familiar with industrial standard, e.g, ISO, IEEE, and etc. and Singapore standard, e.g SS638
Familiar with statutory Regulation or Code, like Singapore transmission code. etc.
Able to work in collaboration with various disciplines
Able to interface seamlessly with engineering, construction, and operations contractors

Able to work on-site in construction environment

Work location: Tuas Nexus

• Up to 4000 + AWS + VB
• 5 Day work week
• Monday – Friday, 7.50am – 4.55pm

Responsibilities:

• Comprehend the policies and objectives related to Quality, Environmental, Water Efficiency, and Occupational Health & Safety, including environmental impact assessments and safety risk evaluations.
• Ensure the effectiveness of the Quality & Environmental Management System within the department, maintaining compliance with legal and regulatory requirements.
• Conduct regular solution analyses and manage replenishment activities.
• Troubleshoot process issues and provide detailed technical reports.
• Identify, assess, and review risk hazards and environmental impacts for both existing and new processes and activities.
• Report any quality, environmental, water efficiency, or safety concerns to the appropriate internal authority.
• Coordinate with customers on production issues and project updates.
• Develop and periodically review work instructions, process parameter standards (PMP), and Failure Modes and Effects Analysis (FMEA).
• Perform any additional tasks as assigned by the supervisor.

Requirement

• Degree in Chemical Engineering or related discipline.
• Having relevant work experience in electroplating / semiconductor field.
• Knowledge and experience in Wafer Plating is essential.
• Independent and self-driven individual.
• A team player with good interpersonal skills.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.

• Able to liaise with consultants and subcontractors.

• Able to work independently and as a key member of the Site Management.

• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.

• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.

• Ensure all works are carried out within schedule and maintain the required quality.

• Ensure work safe environment at the work site and manage workers.

• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.

• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.

• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

• Responsible for general on-site technical and engineering matters.

• Quality Control.

• Co-ordination of works with subcontractors.

• Liaise with the consultants on technical and quality issues.

• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent

• Required skill(s): MS Office, preferable candidate with AutoCad skills

• Minimum 2 years Site/Working Experience. Candidate with LTA Projects experience will be advantage.

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 3 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Position Responsibilities:

• To manage and be responsible for site automation system including ABB 800xa system and control builder programming and Schneider quantum proworx 32 programming, industrial network design and maintenance, Mware and server/workstation and Fix32 database and graphics design/MES/DCS/SCADA/PLC as well as label applicator and ABB Robotic palletizer machine.
• Carry out automation and control implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget and qualification of facilities in accordance with site to approved procedures.
• Provide specialized advice to other sections and subordinates for trouble shooting/continuous improvement to process/systems.
• Monitor and enforce compliance measures (including safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Supervise, develop and motivate junior staff to help realize their maximum potential to contribute towards achieving objectives of the department.
• Contribute to the development of the annual operating budget of the section to ensure achievement operational targets of section.
• Responsible for planning and implementing plant automation maintenance, managing of engineering resources during maintenance plan schedule and prompt resolution of breakdowns, including engaging external assistance.
• To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.
• Monitor and manage the defined automation system to ensure constant and reliable automation control to the plant to minimize disruption to the production process.
• To support customer complaints and deviation investigations to ensure that all relevant engineering corrective actions are completed within the agreed timeline.

To be successful in the role, the incumbent should have the following qualities:

• Good honours degree in the relevant engineering discipline
• At least 3 years of relevant experience in the process/food industry
• PLC (ABB 800xA, Scheider and Siemens)
• Basic awareness of industrial standards
• Good understanding of local codes and requirements
• Hold work experience in Microsoft Windows
• Good knowledge in Control systems both in maintenance and plant commissioning.

Note: This job description is not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

IPS has an immediate need for a talented Engineer (Electrical) to join our industry leading team at our Singaporeoffice.

The Engineer/Senior Engineer works independently on various Bio-Pharmaceutical/Industrial projects as assigned by a Project Manager and acts as Lead Electrical Engineer. The Lead Electrical Engineer position focuses on Electrical engineering and design and will report to the Engineering Project Manager and interface with other discipline engineers as required.

This position will play a role in the entire design process including but not limited to preliminary assessments, concept design, basic design, detailed design, site support, problem resolution, and customer & vendor accessibility. The Engineer/Senior Engineer may have to work on several concurrent projects and at times may assist as a technical expert on a specialized design.

Job Duties and Responsibilities:

· Reviewing and monitoring all Electrical/ELV System deliverables

· Developing HV, MV, LV & ELV System design Calculations, Load Studies, drawings, Specifications, data sheets, Cable Schedules, Scope of works, MTOs and 3D Models, and utilizing Industry sector and safety best-practices.

· Conversant with all Electrical and ELV systems design involved in Pharmaceutical, Petrochemical, Industrial Projects/plants.

· Knowledge of Singapore codes/standards for HVAC/Fire Protection and Sanitary/Plumbing Systems

· Reviewing, monitoring, and ensuring compliance requirements are met for design and (e.g. Standards, specification and local codes and regulations etc.)

· Coordinating with other engineering and design discipline team members

· Developing, Drawings, Documents, Plans/Sections etc.

· Developing Electrical/ELV System SLDs, Schematics, Cable Tray Plans/Sections etc.

· Review/Prepare 2D AutoCAD Design Drawings.

· Review/Prepare 3D Model using Revit, AutoPlant, BIM or similar software and extract design drawings from these models.

· Develop coordinated services drawings with other disciplines

· Responding to reports and requests for information

· Reviewing stamped and finalized drawings (including piping plans and sections, piping

· Ensuring engineering, design quality, and technical accuracy of drawings, 3D models, material quantities, specifications, procedures

· Prepare demolition layouts/schematics, tie-in requirements and translate into drawings.

· Develops design concepts, prepares documents during various stages of design. Corrects and updates design documents. Develops solutions to design problems.

· Initiates squad inter-discipline squad checks and squad checks with client (when necessary) prior to issue of drawings at various stages of project.

· Works with equipment suppliers/vendors to obtain the necessary information needed for design completion. Interacts with clients regularly to secure scope and design intent.

· Ensure acceptable levels of quality and checks for coordination of work to assure documents reflect design intent and necessary coordination.

· Coordinates design work with related engineering disciplines. Attends job and construction meetings, site walks, liaise with M&E contractor and participate in the coordination of the M&E work with other disciplines.

· Contributes to annual performance reviews, assist in educating and development of assigned design staff and acts as resource for design questions.

· Having analytical thinking skills.

· Being ethical and trustworthy.

· Having good CAD knowledge.

· Being flexible.

· Having good written and verbal communication skills.

· Being able to motivate others.

· Having Requisite IT skills.

· Being able to work with a team.

· Having problem solving skills.

· Being able to maintain good business relationships.

Qualifications & Requirements:

· Minimum 8 years experience in design office preferably with consultant/contractor in engineering field, preferably with EPCM/EPC experience.

· Engineering Degree/Diploma from an accredited technical institution.

· Experience with Electrical/ELV systems Design (e.g. Biopharma/Clean Industrial systems’ Projects, Hazardous Area Classifications etc.)

· Must be proficient in the use of CAD and 3D modeling design.

· Has a demonstrated ability to lead Technical Design for Electrical/ELV Systems on Large Industrial Projects, Develop/manage Engineering Deliverables, problem solving, communicate effectively to all key personnel, and time management.

Key Accountabilities:

• Undertake independently the commissioning, installation, maintenance and repair/overhaul of MTU products and its associated equipment at MTU workshop or at site in accordance with MTU manuals and/or specific given instructions.
• Capable in resolving the technical matters and completing the services according to the works order and to the acceptance of the Customers and Supervisors, thereafter, provide the service/investigation reports where applicable.
• Liaise with Supervisors and in-house Technical Specialist for technical assistance, if required.
• Develop and update own skills and knowledge to meet the job requirements through training and self - learning.
• Advise, instruct and train the team members in carrying out the assigned tasks, in using of MTU documentations, tools, customers' drawings, etc.
• Observe the safety regulations of WSHA and guidelines/risk assessment from the company's WHS Committee when performing work at-site or at customer's premises.
• Work assigned from time to time

Qualifications:

• Diploma in Mechanical or Electrical Engineering
• Preferably with working experience on diesel engine.
• Good communication and interpersonal skill, resourceful, team player
• Willing to travel overseas on job assignments

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field
• 5+ years of experience in instrumentation and control system design, analysis, and implementation
• Proficiency in using CAD software for control system design
• Experience with control system programming and software tools such as PLC programming, DCS programming, or SCADA systems
• Knowledge of codes, standards, and regulations related to instrumentation and control systems, such as ISA, IEC, and NEC
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Experience with industrial processes and equipment, such as pumps, motors, and valves, is a plus
• Professional Engineering (PE) license is preferred

• Instrumentation and control systems for industrial processes should be designed, developed, and tested.
• Choose and specify instrumentation parts, such as controllers, transmitters, and sensors.
• Using CAD software, create schematics, diagrams, and layouts for control systems.
• Using software tools like PLC programming, DCS programming, or SCADA systems, develop and put into practice control plans.
• For planned initiatives, carry out cost-benefit evaluations and feasibility studies.
• Ensure that projects are finished on schedule and under budget by working together with project managers, other engineers, and clients.
• Review and approve instrumentation and control system design documents, including specifications, drawings, and calculations.
• Prepare and present technical reports and presentations to clients and other stakeholders.
• Ensure that instrumentation and control systems are designed and installed in compliance with applicable codes, standards, and regulations.
• Provide technical guidance and support to other team members.
• Keep abreast on new developments in the field of instrumentation and control systems as well as market trends.

Responsibilities:

• Take ownership of primary Sales Business Unit, and support assigned secondary Sales Business Unit.
• Establishes prospects within defined business segment
• Sales forecast and planning
• To participate and contribute to planning and meeting both long term and short-term business plan goals at both a strategic and tactical level
• To analyze targeted market segments for opportunities and work with functional teams on strategic projects to win new business
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Research competition and develop customer-specific technical sales strategies
• Responsible for sales turnover through product specifying into target projects through Consultants, Architects or Developers
• Responsible for customers’ technical needs assessment and analysis
• Anchor design and product recommendation to customers
• Support system proposal development, and proposal delivery to customers
• Work closely with various departments to develop winning technical offers, as well as to participates in the preparation of bid responses based on system designs and project specification
• Provides basic training and presentation about products and system solutions to clients
• Provide technical support at construction field, including on-site technical discussions, on-site installation demonstrations, etc.

Job Requirements:

• Experience in Coating/Construction Industry
• Proficient in Microsoft Office and Powerpoint
• Excellent presentation and communication skills, both verbal and written

Essential Attributes:

• Self-driven and willing to take up challenges
• Able to work independently as well as with other team members
• Strong interpersonal and excellent communication skills
• Creative and resourceful individual who possess strong determination for success

Education and Certification:

• Minimum Diploma or Degree in Engineering or equivalent
• Candidates posses own transport

Responsibilities:

• Take ownership of primary Sales Business Unit, and support assigned secondary Sales Business Unit.
• Establishes prospects within defined business segment
• Sales forecast and planning
• To participate and contribute to planning and meeting both long term and short-term business plan goals at both a strategic and tactical level
• To analyze targeted market segments for opportunities and work with functional teams on strategic projects to win new business
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Research competition and develop customer-specific technical sales strategies
• Responsible for sales turnover through product specifying into target projects through Consultants, Architects or Developers
• Responsible for customers’ technical needs assessment and analysis
• Anchor design and product recommendation to customers
• Support system proposal development, and proposal delivery to customers
• Work closely with various departments to develop winning technical offers, as well as to participates in the preparation of bid responses based on system designs and project specification
• Provides basic training and presentation about products and system solutions to clients
• Provide technical support at construction field, including on-site technical discussions, on-site installation demonstrations, etc.

Job Requirements:

• Experience in Coating/Construction Industry
• Proficient in Microsoft Office and Powerpoint
• Excellent presentation and communication skills, both verbal and written

Essential Attributes:

• Self-driven and willing to take up challenges
• Able to work independently as well as with other team members
• Strong interpersonal and excellent communication skills
• Creative and resourceful individual who possess strong determination for success

Education and Certification:

• Minimum Diploma or Degree in Engineering or equivalent
• Candidates posses own transport

Responsibilities:

• Drive optimization of plant capacity, equipment uptime and yield by safe, disciplined & cost-effective operations.
• Provide facilitative leadership and technical expertise in the daily operations of the unit to assist operators in resolving performance gaps vs. production plan.
• Optimize equipment maintenance and/or plant turnaround based on business requirements and/or production schedule.
• Review and reduce energy consumption through implementation of programs, initiatives and projects in the process and utility areas.
• Drive the development and enhancement of the skills of shift team technicians.
• Promote quality culture and drive work discipline in day and shift team operations.
• Participate in review of process and operations (through process safety management) to enhance process safety.
• Develop and lead data-driven productivity initiatives.
• Work with Reliability Engineers in identification of root cause for equipment failure and development of long-term resolutions.

Requirements:

• Bachelor’s degree in chemical, Mechanical or Electrical Engineering
• At least 2 years’ relevant experience in technical/operations function in petrochemical/chemical manufacturing.
• Those without experience but are interested in Chemical Engineering are encouraged to apply.
• Demonstrated ability to understand and apply technical knowledge in chemical process.
• Resourceful and possess excellent analytical & interpersonal skills.
• Willing to work in 12-hour rotating shift environment.

• Instrumentation and control systems for industrial processes should be designed, developed, and tested.
• Choose and specify instrumentation parts, such as controllers, transmitters, and sensors.
• Using CAD software, create schematics, diagrams, and layouts for control systems.
• Using software tools like PLC programming, DCS programming, or SCADA systems, develop and put into practice control plans.
• For planned initiatives, carry out cost-benefit evaluations and feasibility studies.
• Ensure that projects are finished on schedule and under budget by working together with project managers, other engineers, and clients.
• Review and approve instrumentation and control system design documents, including specifications, drawings, and calculations.
• Prepare and present technical reports and presentations to clients and other stakeholders.
• Ensure that instrumentation and control systems are designed and installed in compliance with applicable codes, standards, and regulations.
• Provide technical guidance and support to other team members.
• Keep abreast on new developments in the field of instrumentation and control systems as well as market trends.

RESPONSIBILITIES

• Be part of the site team to perform engineering design, project management and oversee drawing management, and control of technical documentation;
• Good knowledge of Singapore Building Regulations and codes, design development & detailing;
• To assist Project Manager for site planning, coordination, supervision, monitoring and inspections
• To ensure site activities are executed in full compliance with technical specification and approved drawings within project budget and schedule;
• To liaise with authorities, consultants and subcontractors for technical submittal and approval;
• To adhere to construction procedures and safe work practices;
• To ensure efficient control and use of manpower, equipment and materials onsite without wastage;
• Others ad-hoc related duties as assigned.

Requirements:

• Possess a Bachelor Degree in Civil Engineering duly recognised by Professional Engineer Board of Singapore and accepted universities within the BCA listing.
• At least 3 years in relevant working experience in local construction industry;
• Self-motivated, independent and good interpersonal & communication skills

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

• Take instruction from/assist reporting to superior.
• Produce sketch drawings.
• Set design criteria , check design calculation and drawings.
• Assist in technical proposals.
• Check documentation complies with design criteria/Client brief/Approved concept/Standard.
• Liaise/attend clients, architects and site meetings.
• Maintain and check for completeness record, etc.
• Resolve any technical problems faced during the project design and/or construction stages.
• Other ad-hoc assigned by Director.
• At least 5 years of working experience in the construction industry.
• Candidate must possess a least bachelor's degree/post graduate diplima/professional degree in Engineering Mechanical or equvalent.
• Relevant project experience in HVAC/ACMV/MEP system both in design and project management.
• Strong knowledge of M&E installation, current practices, code and authorities requirement.
• Knowledge in ACMV product R&D preferred.
• Knowledge in Auto Cad and BIM preferred.

The Operations Manager will oversee and manage all aspects of the service and repair operations at Perfex, ensuring optimal efficiency, cost-effectiveness, and quality of work. The role involves coordinating service and repair activities for heat transfer products and industrial radiators, managing a team of technicians, and working closely with the production, procurement, and sales teams to meet customer requirements. The manager will also be responsible for continuous improvement of processes, ensuring compliance with safety standards, and meeting customer satisfaction targets.

Responsibilities:

• Oversee day-to-day operations for service and repair, ensuring the timely and effective completion of jobs.
• Manage and coordinate a team of service technicians and repair specialists, ensuring high-quality service delivery and adherence to safety standards.
• Plan, schedule, and monitor repair work to optimize resource utilization and meet customer deadlines.
• Collaborate with procurement to ensure availability of parts and materials required for repairs and maintenance.
• Maintain strong relationships with clients, addressing service inquiries, resolving issues, and ensuring customer satisfaction.
• Implement and monitor KPIs related to service quality, turnaround time, cost management, and safety compliance.
• Drive continuous improvement initiatives to enhance service quality, reduce repair lead times, and improve operational efficiency.
• Develop and implement service policies, procedures, and guidelines to ensure consistency and compliance with company standards.
• Ensure all repairs and servicing comply with regulatory requirements and internal standards.
• Report on operational performance, resource utilization, and customer satisfaction to senior management.
• Oversee the maintenance of service equipment and ensure its operational readiness at all times.
• Manage budget and financial aspects of the service and repair department, including cost control and revenue forecasting.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Operations Management, or a related field.
• Minimum of 5-7 years of experience in operations management, with a focus on service and repair, preferably in the industrial or manufacturing sector.
• Strong understanding of industrial heat transfer products and radiators is an advantage.
• Proven experience in leading teams and managing repair and service operations.
• Solid knowledge of health, safety, and environmental regulations.
• Excellent communication, organizational, and leadership skills.
• Ability to manage multiple tasks in a fast-paced, dynamic environment.
• Strong problem-solving skills and the ability to implement process improvements.
• Proficiency in using ERP systems for planning and scheduling.
• Experience in the manufacturing or industrial service industry.
• Strong technical background in mechanical systems or heat transfer technology.
• Certification in operations management or lean manufacturing is a plus.

JOB DESCRIPTION

- To support Operation Manager to initiate, plan, execute, monitor and control for the entire company’s ongoing projects.

- Coordination between departments from QA/QC, Finance, Engineering, Projects, production, logistic, commercial in local and oversea for smooth operation

- Identifying inefficiencies and areas of improvement

- Resource management

- Any additional tasks out of the above assign by the management

QUALIFICATION:

- Degree/diploma in mechanical/electrical

- Previous HVAC/ACMV experience in Marine/ industry/ land preferred

- Fresh graduate with good working attitude and willing to learn sprit are welcome to apply

We are seeking an exceptionally skilled and detail-oriented NDT

Systems Engineer to join our team. This role demands extensive

expertise in advanced NDT methods, system design, programmin

and hands-on testing. The ideal candidate will have a proven trac

record in operating and programming advanced NDT equipment,

including PAUT, ToFD, DRT, ECT, and ACFM, and will possess

advanced skills in software and mechanical design.

1. Advanced NDT Equipment Handling:

Phased Array Ultrasonic Testing (PAUT): Operate PAU

systems, including setting up and calibrating equipment

configuring probe arrays, and conducting complex

inspections on various materials.

Direct Radiography Testing (DRT): Execute DRT

procedures, including optimizing exposure parameters,

interpreting radiographic images, and ensuring complia

with safety and quality standards.

Eddy Current Testing (ECT): Perform ECT for detecting

surface and near-surface flaws, including setting up test

parameters and analyzing signals.

Alternating Current Field Measurement (ACFM): Utili

ACFM to detect and size surface-breaking defects, includ

setting up equipment and interpreting measurement da

2. System Design and Programming:

Automatic Immersion Systems: Design, program, and

implement automated immersion systems for ultrasoni

testing. This includes developing custom software soluti

and integrating with hardware components.

Software Simulation: Use CIVA software to simulate an

model NDT scenarios, optimizing test setups and predic

inspection outcomes.

Equipment Programming: Develop and troubleshoot

custom programming for ultrasonic testing equipment,

including creating scripts for specific test procedures an

automating test sequences.

3.Technical Skills:

CIVA Software:

Advanced knowledge of CIVA software fNDT simulation and modeling.

SolidWorks and AutoCAD:

Proficient in SolidWorks formechanical design and AutoCAD for technical drawing.

Programming Skills:

Experienced in programmingultrasonic testing equipment, including creating customscripts and automation solutions.

4.Personal Qualities:

Initiative and Hardworking:

Self-driven with a strong wethic, capable of working independently and managing pressures.

Analytical Skills:

Excellent analytical and problem-solviabilities, with a keen eye for detail and precision.

5.Consulting and Solutions:

Offer expert consulting services to addresscomplex NDT challenges, providing tailored solutions baon client requirements and industry standards.

Problem Solving:

Analyze and resolve technical issuesrelated to NDT processes, equipment, and systemintegration.

6.Travel Requirements:

Regional Travel:

Travel to various international locationincluding the Middle East (Saudi Arabia, UAE, Oman, Qaand Asia (Singapore, Malaysia, Indonesia, Thailand,Bangladesh, India) for project assignments.

Adaptability:

Adapt to diverse working environments,including offshore and onshore sites, and handle projecdemands with flexibility.

Application Instructions:

Interested candidates should submit a detailed resume outlitheir qualifications, experience, and relevant certifications.

Please include a cover letter addressing how your skills andexperiences align with the responsibilities and requirementsoutlined above.

Responsibilities:

• Arranges necessary facilities and instruments for jobs such as meters, test kits, temporary preparations, shore generators, and load banks
• Performs testing and commissioning activities and ensures that proper documentations are approved and signed
• Supervises and deploys manpower to execute the operational tasks
• Ensures that electrical equipment and switchboards meet the purchase specifications, and arranges for protection and maintenance of the electrical system
• Reviews commissioning work processes to enhance efficiency and productivity
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department and vendors
• Plans and schedules the testing and commissioning requirements based on project basis, and organises all logistics requirements for major operations
• Performs any other assigned duties and responsibilities

Requirement

• Diploma in Electrical Engineering or related Engineering Disciplines
• Min. 4 years of related work experience working on FPSOs
• Possess working experience related to testing of LV/ MV Switchboards, power generators, DCS / ICSS interface for PMS system
• Capable of testing and calibration of Electrical switchboard and its components, troubleshooting and clear understanding of system specification and class requirements
• Familiar with the testing procedures and applicable rules and regulations of regulatory bodies
• Familiar with test memos and manuals

Our Addresses:

Seatrium - Admiralty Yard

Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Seatrium Limited - Tuas Yard

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Our Working Hours:

Mon - Thu: 8:00 am - 5:15 pm

Fri: 8:00 am - 4:30 pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

OB DESCRIPTION

Job Title

Quality & HSE Engineer

Occupation

QUALITY CONTROL ENGINEER

Job Description & Requirements

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Purpose:

Responsible for performing the final inspection of assembly products to meet Customer's quality standards.

Key Area of Responsibilities:

· Perform In-process and Final Inspection for assembly tools and loose assembly modules to meet the requirement as defined on drawing, WI and any related documents.

· Initiate Material Review Board (MRB) review when part or assembly is not according to requirement as defined on drawing, WI and any related documents during in-process inspection.

· Update outgoing inspection record after Final Inspection to allow monitoring of the internal quality.

· Raise Non-Conformance Report (NCR) for non-conformance found to ensure reject is recorded.

· Support and participate in company continuous improvement program.

Qualification & Experiences:

· Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course

· Preferably with Workplace safety & health in Metal work certification

· Knowledge on quality inspection and buyoff

· No experience are welcome

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation).
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID, Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.

Requirements:

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above.
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.