Salary: $6,000 - $8,000 + 15 Days AL

5 Working Days, 9am-6pm(Up to change according to project)

Changi South (Between Bedok / Kembangan MRT)

Requirements:

Degree or diploma and aptitude relevant to Broadcast Engineering (specializing in Broadcast Engineering, including System / Audio Engineering / IT or any other related area).

Safety Knowledge: Good knowledge of the principles of safety at work as applied in the TV industry.

Understanding of OB Systems: Understanding of Outside Broadcast systems and environment.

Knowledge and experience of operating and troubleshooting a range of OB equipment in sound, communication, IP, etc.

Minimum 5-8 years of work experience in Outside Broadcast Environment.

Event Experience: Experience with internatinal scale events is necessary.

Job Scopes: (Before, During & After Project)

Review the operations of the Engineering Department to ensure the quality of broadcast operations meet industry standards.

Remain up-to-date with outdoor broadcast technology and equipment.

Guide the Assistant Engineers to read technical (Auto CAD) engineering drawings and plan for their training where needed.

Ensure procedure for video equipment testing and preparation is in place.

Ensure adequate processes are in place for communication / escalation of technical related problems that arise during a project.

Keep Engineering environment (Warehouse, Engineering Room and desks) clean, functional, safe and presentable.

Ensure compliance of engineering procedures with Health & Safety guidelines.

Supervise and schedule maintenance of specific categories of broadcast equipment to ensure the equipment are fully functional and well maintained (internally and externally clean/dust-free).

Monitor physical and technical quality and appearance of broadcast equipment. Prepare the maintenance & improvement report.

Plan and maintain a list of specific categories of broadcast equipment which require scheduled maintenance.

Job Purpose

· Drive all Oceanfreight Operational KPI performance of all Asia Pacific countries and support the countries in achieving their KPIs as well as the productivity and data quality benefits intended to be delivered through these KPIs.

· Drive the strategic design and change of any KPIs where needed

Differentiator

· Subject matter expert and strategist who applies advanced knowledge of the job area and Oceanfreight processes typically obtained through advanced education and work experience

· Manage projects / processes and delivers results and strategy with minimal supervision

· Problems faced are difficult and complex and need strategic vision to design the best way forward

Main Responsibilities

· Drive Operations process and performance improvement plans with in-depth analysis and potential solution proposals as well as strategic vision to meet KPIs as well as productivity and data quality goals

· Drive the impact of process and system changes to ensure quality, efficiency, and improvement

· Understand and analyse operational data and statistics to identify further opportunities, develop action plans, and implement process improvements and operational strategic vision

· Cooperate with Global, Regional and Country Operations & Compliance teams with various analysis and process improvements and provide ad-hoc assistance to country, regional and global senior management

· Formulate innovative business and technical solutions within a strategic framework to improve operational effectiveness

· Consolidate the results of improvement projects and compose relevant report on progress and results

· Drive best practices to identified key risk areas and resolve them

· Support the design the Global landscape and strategy for operational topics within Oceanfreight

Stakeholders

· Connect with and influence other specialist departments such as, but not limited to, BPO/IT Training, BPO/IT CIS (Customer Information Services), Global Oceanfreight Operations, etc.

· Build strong, trusting cross functional relationships with DGF senior managers such as Country Oceanfreight heads and country managers, regional Oceanfreight head and Regional CEO

· Understand customer and key stakeholder interests and concerns such as Oceanfreight Operators in country, supervisors, and country management. Advise stakeholders of purpose, goals and strategy behind projects

· Provide technical and system guidance to line managers and operators

Management Responsibility

· Individual contributor who may manage some employees

· Directs the work of country level professionals and (senior) manages process and programs affecting country operational productivity and contribute direct to their bottom line

· Coach and review the work of country level professionals and operators

Required Skills

Operations Management, Process Engineering, Business Processes, Quality Control, Net Promoter Score, Reporting, Performance Management, Process Improvement, First Choice, Change Management, Cost Reduction, Workflow Automation, DGF Business Knowledge, Business Strategy, Project Management, Stakeholder Management, Influencing, Feedback, Presentation & Storytelling, Facilitation

Qualifications

· Bachelor’s Degree or equivalent experience/qualification

· More than 6 years of experience

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Report to Project Manager /Site Manager for the Arrangement of work
• Liaise with consultants for the submission and approval of materials and shop drawings
• Responsible for planning, programming and monitoring of work progress on site
• Co-ordinate the inspection work by Resident Engineer and clerk of works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors
• Structure and Architectural work
• Set up accounts and workstations .
• Monitor performance and maintain systems according to requirements .
• Troubleshoot issues
• Ensure site safety and proper execution of site work procedure on site
• Willing to work on Sites (under hot sun)

Job Requirements:
Degree/Diploma in Mechanical Engineering or related
Preferably 3 years of experience on project management and building construction projects
Good communication and interpersonal skills
Software skills on MS Project and ACAD preferred

• Position: Operations Manager (CLEANING)
• Location: Tuas (2 minutes walk from Gul Circle MRT)
• Working Hours: Monday to Friday (8am - 5pm)
• Salary (commensurate with experience): Up to $10,000 + Allowance + AWS + Performance Bonus
• Duration: Permanent
• Industry: Waste management service

Main Responsibilities:

• Oversee and manage cleaning teams at different client locations within a day, ensuring that tasks are completed efficiently and according to the client’s specifications
• Ensure that staff follow systematic cleaning routines, maintain high standards, and comply with each client’s unique requirements
• Serve as the primary point of contact for clients, ensuring their cleaning needs are met and addressing any issues or requests promptly
• Build strong relationships with clients by maintaining regular communication and ensuring high levels of customer satisfaction
• Travel to multiple client sites in a single day as required, demonstrating flexibility and effective time management
• Adapt to various working environments, ensuring smooth coordination of cleaning activities across all assigned locations
• Communicate effectively with clients, employees, and third parties, ensuring professional representation of the company at all times
• Provide clear instructions to cleaning staff and report progress to clients and senior management
• Ensure that all cleaning operations comply with relevant health and safety standards at each client site
• Conduct regular site inspections to ensure staff adhere to job descriptions, safety regulations, and client expectations
• Any other ad-hoc duties assigned

Requirements:

• To have experience clinching and handling cleaning accounts and cleaners, B2B
• Minimum of 2 years of experience in managing housekeeping or cleaning operations, preferably in an outsourced cleaning company
• Knowledge of professional cleaning standards and sanitation processes

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

-Manage the team in safe, clean and

efficient environment.

-Drives new business, manages key relationships and accounts

-Processing, handling, recording all inbound and outbound shipments.

-Problem solving, solutions driven and implementing change to improve productivity

-Setting KPI and working closely with the management team

-Scheduling, training, supervising and appraising staff.

-Ensure adherence to all company policies and procedures, good practices, and safety standards.

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

The Business Analyst will be part of a team that manages product development, implementation and continuous improvement of crew IT applications and systems in Flight Ops Division, Integrated Crew Operations and Planning Department. The ideal candidate will have a strong background in systems management, a deep understanding of operational requirements, and a passion for technology-driven solutions.

Key responsibilities

• Playing a key role in project management, ensuring timely and within-budget delivery.
• Review training and qualification records within crew products, identify and redesign systems, processes, and reports for improvements to ensure crew training and qualifications meet regulatory and compliance requirements.
• Develop user stories and define system objectives and acceptance criteria, ensuring they meet operational and compliance requirements.
• Collaborate with IT and software development teams to design and enhance system functionalities.
• Develop and maintain strong relationships with key stakeholders including IT and software development teams to manage product releases.
• Prepare user requirements and tender specifications for new systems.
• Prepare and submit cost justification paper to management.
• Evaluate tender proposals and submit recommendation to management.
• Perform user acceptance testing.
• Develop and implement change management plan.
• Conduct user training and system documentation.
• Conduct risk assessment and business continuity exercise as required.

Requirements

• You should possess a recognized University degree, preferably with Honours in Computer Science or Information Science or Technology.
• Good knowledge in project management, analytical, problem-solving skills and decision-making abilities.
• Outstanding communication and interpersonal skills, capable of working effectively with cross-functional teams.
• Experience in managing IT projects and excellent understanding of operational processes and regulatory requirements related to crew management will be an advantage.
• Entry level candidates with relevant internship experience might be considered

We thank all candidates for your interest in Singapore Airlines, and regret that only shortlisted candidates will be notified.

Position Summary

You are responsible for production, assembly, design and development of hardware and equipment the Company’s products. The job also involves sourcing of components, participating in technical design, working with Software Engineers and/or Project Manager in budgeting, scheduling, management of contractors, and installation, deployment and maintenance of the products in an operational environment (on-site when required).

Main Responsibilities

• System set-up; troubleshooting, resolution of anomalies discovered in equipment and methods, provision of assistance in maintenance service
• Installation of equipment room racking, servers and UPS. cable works for power and communication
• Installation and maintanance of electrical and Instrument equipment
• Installation, configuration, testing and maintenance of operating systems, application software and system management tools. Ensuring the highest levels of systems and infrastructure availability and security.
• Managing and monitoring all systems and infrastructure.
• Collation of information on hardware systems, costs of development, work program and technical specification
• Participation in the development and testing process, systems testing and commissioning
• Provision of support of design and installation of ‘turnkey’ and / or ‘user-defined’ system
• Sourcing and identification of suppliers for evaluation
• Conduct of preliminary assessment on systems requirement of the clients and matching with components recommended by sub-contractors
• Provision of assistance in systems deployment, system implementation and / or installation
• Performance of corrective, preventive maintenance work in-house or at customer site (on-site)
• Implementation of enhancement/upgrades as instructed
• Preparation of documentation and logistics support where necessary
• Travelling maybe required from time to time

Skills and Experience

· Minimum 5 years hands-on experience in electrical and electronic system set-up, installation, servicing, troubleshooting, and maintenance

· Strong debugging skills

· Strong team work as well as able to work independently

· Well-versed in:

Micorsoft Windows Server and Desktop Operating Systems

Microsoft Office

Single-Line Diagram

Electrical Drawings

· Experience in:

Hands-on Unit Testing

Hands-on Integration Testing

AutoCAD

Network Diagrams

Project Management

· Competency in:

IT Network installation, configuration, and administraton

IT Systems installation, configuration, and administraton

· Knowledge of:

Cyber Security concepts and implementation

iOS and Android platforms

Microsoft Project

Minimum Qualifications

· Degree in Electrical or Electronics Engineering, or equivalent practical experience

· Practical experience in:

System set-up, installation, servicing, troubleshooting, and maintenance

Attributes

· Critical thinking and problem-solving skills

· Strong interest and awareness of new technologies

· Proactive with good time-management skills

· Good interpersonal, analytical and communication skills;

· Ability to:

Multi-task, prioritize activities, work independently and calmly under pressure

Interact positively, clearly and professionally with peers, customers and vendors

Anticipate and take proactive actions

The Ideal Candidate

· You possess big picture thinking, a willingness to learn, dive into unfamiliar systems and resolve complex issues both from a business and technical perspective.

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Job Responsibilities

• Develop object detection and tracking using deep learning and machine learning.
• Maintain and optimize algorithms of the existing system framework related to computer vision and deep learning.
• Maintain and optimize existing web and Android applications.
• Collaborate with the engineering team to deliver complete systems and products.

Job Requirements

• Candidate must possess at least Bachelor’s Degree/ Post Graduate Diploma/ Professional Degree in Computer or Electronic or equivalent.
• Required skills: Object Oriented Programming languages (E.g. C++ in Qt and Visual Studio), Python.
• No prior working experience is required.
• Knowledge of image processing and computer vision will be an advantage.
• Experience in OpenCV or Pytorch or Tensorflow will be an advantage.
• A team player who can work under stress and independently.

Job Description

• Design and development/assembly of product
• Troubleshoot and resolve issues with automation systems and equipment.
• Generate project proposal
• Coordination with stakeholders for product build
• Provide technical support to project end user
• Documentation of reports/manuals following ISO 9001/2015 standard
• Source and liaise with the supplier
• Scheduling, purchase, installation/assembly of equipment for sales/exhibition
• Testing and commissioning of equipment (factory & site)
• Liaising with customers upon project completion, after-sales services, feedback/improvement, and exploration of potential business opportunities.

Job Requirement

• ITE / Diploma / Bachelor in Electrical Electronics/Mechatronics/Mechanical Engineering or Engineering or relevant discipline
• 3 years of relevant experience when applying for senior position
• Working knowledge and experience in PLC, micro-controllers, electrical wiring, etc in automation applications
• Experienced in Automation Design
• Able to work under pressure and with minimum supervision
• Possess strong leadership qualities, positive working attitude, good interpersonal skills, self-driven and adaptable to new ideas
• Able to work overtime; e.g. during weekends and public holidays
• Ability to coordinate and communicate with relevant parties to complete the project

We are seeking an experienced Firmware Engineer to join our team to design, develop, and optimize firmware for embedded systems. The ideal candidate will have strong experience working with FPGA, ARM processors, and embedded software development using C, C++, and Python Scripting Skills. You will implement cyber security software / firmware solutions on ARM/FPGA based embedded systems.

Key Responsibilities:

●      Develop and maintain firmware for embedded systems, specifically targeting FPGA and ARM-based processors.

●      Design and implement real-time embedded systems using C, C++, and Python.

●      Write and optimize device drivers, board support packages (BSP), and low-level hardware interfaces.

●      Collaborate with hardware engineers to define system architecture and debug hardware/firmware integration issues.

●      Implement, simulate, and test FPGA-based firmware using tools like Verilog, VHDL, or SystemVerilog.

●      Work on bootloaders, and system diagnostics.

●      Perform unit testing and integration testing for firmware, ensuring system performance and reliability.

●      Contribute to code reviews, technical documentation, and design reviews.

●      Troubleshoot and resolve firmware issues, optimizing system performance.

●      Integrate and deploy AI/ML models (e.g., neural networks) into embedded devices for tasks such as anomaly detection, or predictive analytics.

Qualifications:

●      Bachelor’s or Master’s degree in Electrical Engineering, Computer Science, or a related field.

●      3+ years of experience in firmware or embedded software development.

●      Strong proficiency in C, C++, and Python.

●      Experience with FPGA design and implementation using Verilog, VHDL, or similar hardware description languages.

●      Hands-on experience with ARM processors (Cortex-A, Cortex-R, or Cortex-M series) and associated toolchains.

●      Familiarity with embedded Linux and/or RTOS environments.

●      Experience with hardware debugging tools such as JTAG debuggers.

●      Strong understanding of real-time embedded systems, including hardware/software interfaces, peripherals (PCIE, UART, SPI, I2C), and memory management.

●      Excellent problem-solving and communication skills.

Preferred Qualifications:

●      Experience with PCIe, DDR, or high-speed interfaces.

●      Experience with scripting languages like Python for automating testing and development processes.

●      Knowledge of networking protocols and interfacing.

●      Familiarity with secure boot, encryption, and other security measures in embedded systems.

●      Experience with AI/ML frameworks such as TensorFlow Lite, PyTorch, or Keras, and knowledge of how to optimize them for embedded systems.

●      Hands-on experience with neural network architectures (CNNs, RNNs, DNNs) and deploying them on resource-constrained environments.

• Performance Bonus: Our company recognizes and rewards high performance with competitive bonuses tied to your results.
• Restricted Stock Units (RSUs): We issue RSUs to contributors, offering you a stake in the company's success and aligning your interests with our long-term growth.
• Career Advancement Opportunities: We provide clear career progression pathways and support your development to help you reach your full potential.
• Collaborative Work Environment: Join a team that values innovation, collaboration, and continuous improvement.

Are you curious about the advancement of technology that enable millions of devices to be created on a single silicon chip the size of your finger? Are you pursuing to become a wafer fabrication expert in a fully integrated process chain? Look no further as UMC Process Integration Engineer position is the perfect fit for you.

UMC Singapore is expanding its production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. We are looking for Process Integration Engineer to maintain customer production by ensuring stable wafer quality and on-time wafer delivery through process integration and daily management. This position provides excellent opportunities for growth and development.

Responsibilities

• Introduce customer's new product to FAB and support in new product's tape out procedures to ensure pilot success.
• Improve new Product yield and ensure mass production inline, WAT and CP yield stable
• Define standard operation procedure for daily job
• Co-work with module engineers to solve production related issues. (inline, WAT, yield and reliability...)
• Co-work with module engineers to develop customized process to meet customer special requirement

Qualifications

• Possess at least a bachelor's degree in Electronic Engineering, Electrical Electronic Engineering, Physics, Material Science
• Study in specialized in wafer chip or related semiconductor course
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• Semiconductor device process engineer background is preferred
• Semiconductor foundry experiences is preferred

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Description

The End User Computing (EUC) team in SIA provides IT services for all SIA Group employees in Singapore and Overseas. We are looking for an experienced professional with relevant experience to be part of the EUC team and play a significant role in modernizing our enterprise authentication system. This position also offers significant opportunity to contribute to the enhancement of our security posture by enabling Multi factor Authentication (MFA) and Single Sign-On (SSO) solutions.

Responsibilities

•Design, implement, and maintain a robust enterprise authentication system with a focus on Multi-Factor Authentication (MFA) and Single Sign-On (SSO).

•Evaluate and assess various solutions available in the market and conduct Proof of Concepts (PoC) to determine the best fit for the organization.

•Stay abreast of industry best practices and emerging technologies to continuously enhance and improve authentication mechanisms.

•Collaborate with cross-functional teams to ensure alignment with overall security strategy.

•Develop and execute a comprehensive migration plan to transition users to the new MFA solution.

•Implement effective change management strategies to minimize disruption and ensure a smooth transition.

•Collaborate with application owners and development teams to seamlessly integrate applications with the new SSO solution.

•Define standard and create authentication patterns for application integration.

•Troubleshoot and resolve any issues related to SSO integration, ensuring optimal performance.

•Act as a subject matter expert and provide guidance to internal stakeholders.

Required Skills

•Bachelor’s degree in computer science, Information Technology, or a related field.

•Proven experience in designing and implementing enterprise authentication solutions.

•Solid understanding of Single Sign-On (SSO) and experience with SSO solution implementation.

•Familiarity with identity and access management (IAM) concepts and technologies.

•Strong knowledge of security best practices.

•Excellent communication and interpersonal skills to collaborate effectively with teams.

•Good working knowledge in Active Directory, Single Sign-On, 2 Factor Authentication, Encryption, LDAP/LDAPS, RADIUS protocol, SAML 2.0, Open ID Connect and OAuth 2.0.

•A good understanding of SDLC and Agile methodology.

•Enterprise Architecture (TOGAF) or Microsoft Certification (MCSE) preferred.

•Exposure to ITIL (Incident, Problem & Change management) preferred.

•Ability to work independently, multi-task, and take ownership.

• Position : Estimation Engineer (Aerospace) - Up to $4,500 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,500 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Responsible for providing complete analysis, estimate, and studies for all deliverables involved in the assigned scope.
• Identify design and constructability issues and analysis to determine constructability.
• Develop detailed cost estimates from engineering drawings.
• Act as a connection between subcontractors, design team and client.
• Determine required but non indicated scope through the analysis of site conditions and all contract documents (plans specifications, etc.)
• Collaborate with operations staff to ensure that General Conditions and Requirement items are appropriately captured in the estimate.
• Perform assessment on subcontractor proposals to ascertain if scope is covered.
• Assist in auto-cad drawings and drafting.
• Any other ad-hoc duties required

Requirements:

• Minimum Diploma in Mechanical Engineering or equivalent
• Minimum 3 years’ experience in the fields of engineering, manufacturing, servicing, and repair of aircraft tooling, GSE’s, and/or similar equipment.
• Sound working knowledge of engineering principles, GD&T, materials, surface & heat treatments, and equipment testing.
• Candidates with experience in a manufacturing environment including machining, steel and aluminium fabrication, welding and sheet metal work will have an advantage
• Proficient in Microsoft Office
• Bilingual in English & Mandarin to liaise with chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Salary: $2600-$3000

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule, claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English

Able to draw 2D / 3D

Engineer, Automation

Singapore Headquarters | Full-Time | Hybrid

HOYA Electronics’ primary focus is on the development of optical and extreme ultraviolet (EUV) photomask blanks, which are critical components in the manufacturing process of the latest-generation chips used in various applications such as artificial intelligence, high-performance computing, and 5G. The company also manufactures a range of photomask blanks used in the production of chips for various applications such as memory, logic, and power devices.

Life at HOYA Electronics

HOYA strives to create innovations for a better future for people.

At HOYA Electronics, we are dedicated to innovation in the information technology segment, envisioning a world where all can thrive in harmony with nature. Our people are guided by our mission along with principles of commitment and innovation, influence every decision and action we take. We prioritize environmental protection, safety, and human rights, fostering diversity, inclusion, and employee well-being.

Be Empowered to Innovate and Develop for a Better Tomorrow with Us

• Experience an empowering and inclusive workplace that fuels your growth and development.
• Unlock your potential with abundant opportunities for skill-building and career advancement.
• Thrive in an environment that supports work-life balance and values your well-being.
• Receive fair and competitive rewards – your success is our success.
• We believe in recognizing excellence and celebrating your contributions.

Get to Know the Role

We are seeking an Automation Engineer who is capable of managing factory automation technologies. Your responsibilities will include troubleshooting systems, designing and testing automated equipment, and leading efficiency improvements using Lean Manufacturing principles. You will also need to maintain machine uptime, oversee new machine setups, and integrate equipment across plants, so we are seeking someone who has a keen eye for detail. You should also have strong project management skills, to ensure timely and cost-effective project delivery, as well and stay abreast of advancements in the industrial automation field to drive continuous productivity improvements.

Essential Responsibilities

• Understand factory automation technology and equipment such as robots, automated guided-vehicles and computerized manufacturing system, AMHS etc.
• Repair, troubleshoot advanced AMHS hardware, software and interface problems, maintaining the system to ensure full functionality and reliability
• Design, modify, implement and test automated machines, programs, jig and fixture to required job specification in an efficient and cost-effective manner. Lead in-house automation projects on layout, build, troubleshoot, repair and modify developmental and production equipment.
• Drive efficiency improvement using Lean Manufacturing approach to identify waste, improve/streamline process flow and automation improvements with team and/or with cross-functional team collaboration
• Lead and maintain overall machine uptime, monitor machine utilization and OEE index by identifying and eliminating the causes for recurring issues with CAPA implementation
• Setting up new machines, transferring of equipment at different plants and integration to existing system. Supervise installation crews and support the field installation work.
• Project management on cost, quality, scope and schedule to ensure on timely delivery of the project and within budget
• Participate in design and documentation reviews, update management on work progress and deviations
• Keep abreast of latest developments in industrial automation technology and introduce them to plant wide operations achieve cost savings and productivity improvements
• Any ad hoc duties assigned by supervisor/manager

Skills and Competencies Profile

• Degree or Masters in Engineering (Mechanical, Mechatronics, Electrical, Electronics, Automation, Industrial, Computer etc)
• At least 2 years relevant work experiences in a similar capacity and semi-con industry
• Hands-on experiences in working with cleanroom automated equipment, knowledgeable about cleanroom work environment and SEMI standards requirements
• Proficiency with CAD software: such as AutoCAD is essential, and others such as SolidWorks is good to have
• Knowledgeable of semi-con industry standard on equipment design, safety rules, operating and maintenance instructions and procedures.
• Able to read and interpret technical drawings, equipment manuals etc
• Creative thinker, proactive and able to demonstrate excellent project management and problem-solving skills
• Independent, self-starter with good written, communication and analytical skills
• Candidates with automation design, PLC experience, understanding of computer programming and software development are highly desirable
• Excellent experiences in handling and managing machine preventive/predictive maintenances and critical spare part controls, in order to minimize unplanned downtime

HOYA Electronics Singapore Pte Ltd is an equal opportunity employer. We are committed to building diverse teams and creating a safe and inclusive workplace that enables our people to perform at their best, regardless of nationality, ethnicity, religion, age, gender identity or sexual orientation, and other attributes that make every individual unique.

An offer with HOYA Electronics Singapore is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations.

HOYA Electronics Singapore does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with HOYA Electronics Singapore.

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

Job Description

• Support day-to-day operations
• Daily picking, sorting and packing goods for local outbound shipment.
• Handle inbound of goods and restocking.
• Stacking outgoing goods on pallet for outbound according to 3PL and the total number of goods to ship out
• Ensure 3PL scan all parcels and tally the numbers recorded.
• Accountable to replenishment of goods and packing materials/ supplies timely.
• Report any discrepancies to immediate superior and ensure any operational issues are addressed promptly.
• Handle goods returns and refunds.
• Maintain proper housekeeping and comply with safety requirements.
• cycle count and stock take.
• Any other duties as assigned by the supervisor or manager.

Job Requirement

• Warehouse environment
• Basic command of English
• Ability to work independently and as a team
• Able to lift and carry heavy goods
• Fast-paced environment
• Start work immediately will be an added advantage

This is a 12 month contract role based in Singapore, Experience in Mechanical Engineering/ Electrical Engineering is preferred.

Job Responsibilities:

• Execute regional space, power, cabling and other infrastructure requirements in support of Edge network requirements, present and future.
• Design/Plan new site electrical/mechanical critical infrastructure for Data Center sites.
• Work with in house Engineers and design and draw layout of Edge/POP sites floor plans, allocate space assigned to network function, optical, backbone, IP, compute, etc.
• Execute all SOW Engineering design packages related to new or existing edge/pop sites as per Edge and Network Services (ENS) standards.
• Proactively contribute to documentation, automation and processes as they evolve.
• Understand the overall needs of current and future POP infrastructure.
• Guide retrospective reviews of completed projects with teams to incorporate lessons learned into the team's future roadmaps and goals.
• Ensure processes are being followed and all documentation and systems are delivered as per set standards.
• Support site acceptance process for new POP sites.
• Travel to site across states for site survey and evaluation on as per need basis.

MINIMUM QUALIFICATIONS

• 8+ years of electrical engineer work, Professional Engineer License required.
• Outstanding proficiency with AutoCAD/AutoDesk tools.
• Outstanding proficiency with AutoCAD/AutoDesk tools/BIM 360/Blue Beam.
• Knowledge of engineering principles of the infrastructure architecture (space line up, air flow, cooling etc.)
• Knowledge of Telecom Central Offices, Data Center, Collocations and Remote Hut environments, to include engineering principles regarding power and other infrastructure.
• Understanding of optical network design, installation and maintenance for service providers or enterprise networks
• Knowledge of Telecom Central Offices, Data Center, Collocations and Remote Hut environments, to include engineering principles regarding power and other infrastructure.
• Experience with communication and directing tasks to vendors/suppliers.