Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job Description

• To act as Resident Engineer for underground MRT station
• Supervise and ensure strict quality control
• Review Technical Documents
• Keep record of all site activities and prepare daily report
• Supervise any repair works
• Witness & verify any field test carried out on site;
• Monitor and report progress of the works on site;
• Manage a team of RTOs
• Work atleast 60 hours per week

Requirements

• Registered with JAC of IES/ACES as an accredited Resident Engineer
• Possess a Degree in Civil Engineering
• Minimum 10 years of relevant experience in Deep Excavation underground projects
• Minimum 8 years of hands-on site experience specifically with LTA projects
• Professional experience in deep excavation, Earth Retaining Stabilizing Structures (ERSS), Diaphragm wall construction, Jet Grouting, Strutting works, Drain diversion, etc

AMC Founded in 2006, licensed by the Singapore Police Force, Police Licensing and Regulatory Department. offers custom security solutions suited to your demands. We work towards meeting the unique needs of every client, be it an enhancement to your current security set up or a complete overhaul that includes:

• Virtual patrolling

• Facial recognition access control

• Remote vehicular access control

• License plate recognition technology

• Visitor Management System

Responsibilities:

• Plan, develop and execute test plans and test cases for desktop and web-based applications.
• Perform manual and automated testing using tools like Selenium, Bash scripting and Python.
• Identify, document, and track bugs using bug tracking tools such as JIRA
• Collaborate with developers, product managers, and other stakeholders to ensure high-quality software releases.
• Conduct performance testing using tools like JMeter.
• Perform API testing using tools like Postman.
• Create and maintain test automation frameworks and scripts.

Requirements:

• Previous leadership experience in planning and proposing QA test activities to stakeholders.
• Proficiency in Python scripting, bash scripting and C++ would be beneficial.
• Strong understanding of manual testing methodologies and processes.
• Experience with automation testing tools (e.g., Selenium).
• Familiarity with version control systems (e.g., Git, SVN).
• Knowledge of Windows and Linux environments.
• Excellent analytical thinking and attention to detail.
• Strong verbal and written communication skills.
• Ability to troubleshoot and resolve issues efficiently.
• Experience working in agile teams.
• Familiar with test methodologies, including functional and non-functional testing, regression testing, smoke testing, sanity testing, end-to-end testing, integration testing, and installation testing

Just imagine your future with us…

At Aurecon we see the future through a very different lens. Do you?

Innovation, eminence and digital are at the heart of everything we do. Are you excited about the future?

Are you driven by the opportunity to work on some of the most challenging and complex projects around the world and to learn from the best? We are.

Diversity is at the core of everything we do. We work together to create a culture based on respect, trust and inclusiveness. Our differences are what fuel our creativity.

What will you do?

In this position you will join our Singapore Buildings business, where you will play an integral part in a team of highly skilled specialists that ‘bring ideas to life’ for our clients across all types of building and infrastructure projects.

We know the work we do is vital in assisting our world’s economic development and, it’s the technical expertise and the depth of knowledge of our people that really sets us apart. Here are the key things you will do to ‘bring ideas to life’.

• Taking responsibility for projects from initial design, through to construction and final review.
• Working in collaboration with other design disciplines, locally and regionally to ensure the integrity of the overall design.
• Managing projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications.
• Assisting in workload management and resource forecasting and involved in preparation of proposal documentation.
• Reviewing and ensuring compliance, including drawings, reports, specifications, survey, access, and preparation of appraisals.
• Building and maintaining effective relationships with clients, recognizing, and developing potential business opportunities.

We know today’s complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.

What can you bring to the team?

Firstly, you will share our genuine passion for re-imagining engineering and be someone that actively pursues continuous learning to help shape the future. You will also need the following:

• A Bachelor’s Degree in Mechanical Engineering, with at least 10 to 12 years’ relevant experience in Buildings Mechanical Design and commissioning of M&E systems in modern commercial and industrial buildings. Data Centre Experience will be preferred.
• Strong project management skills with ability to lead project team members on technical delivery. Excellent presentation, verbal, and written communication skills.
• Sufficient experience to demonstrate intermediate to advanced knowledge of relevant engineering codes, standards, and practices.
• Organised approach and ability to accept increased responsibility and produce accurate and detailed work.
• High level of computer literacy and exposure to BIM / Revit will be highly desired, with advanced problem-solving skills through investigation and analysis.

Our Aurecon Attributes define our way of being – they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don’t expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here.

We value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?

About Us

Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.

Over the last 85 years, our team of more than 5,000 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world’s most complex challenges.

In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking – an approach that is guided by digital engineering, the user experience and sustainability – ensuring that the work we do is future ready and leaves a legacy for the next generation.

Think engineering. Think again.

Want to know more?

You can learn more about what it’s like to work at Aurecon by visiting the careers section of our website.

If you are intrigued or excited by what you have read, then we want to hear from you. Apply now!

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• Design, develop, implement, and maintain software systems.
• Collaborate with team leads to understand client needs, assess technical implications, and estimate project timelines.
• Create, update, and review technical documentation.
• Oversee offshore teams, ensuring adherence to quality standards and technical guidelines.
• Review code for potential issues, conduct unit and integration testing, and support user acceptance testing.
• Develop deployment strategies, support production environments, troubleshoot issues, and implement corrective actions.
• Perform other tasks as assigned.

Job Requirements:

• Bachelor's degree in Computer Science or Information Technology with at least 5 years of software development experience using Java (J2EE, Spring Framework) and frontend technologies (JavaScript, Angular, AngularJS), preferably in a banking or financial setting.
• Experience working with offshore teams.
• Hands-on experience with deploying and managing cloud-native Java applications on Microsoft Azure.
• Knowledge of the Newgen BPM system.
• Strong understanding of software development life cycle methodologies, including Waterfall and Agile.
• Excellent communication, presentation, and interpersonal skills.
• Self-motivated, proactive, and able to work independently or as part of a team. Demonstrates a strong sense of responsibility and ownership.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24991

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

We are looking for a skilled IT Security Engineer to join our client for a 1-year direct contract. The successful candidate will bring strong expertise in information security and hands-on experience managing security projects from start to finish.

Responsibilities:

• Lead and execute security projects across various domains, including endpoint, network, and application security.
• Implement and manage security tools, such as Web Proxy, Endpoint Protection, Email Security, and Vulnerability Scanners.
• Assess system security through threat modeling and propose effective solutions.
• Explore and integrate emerging security technologies to strengthen the organization’s security posture.
• Collaborate with teams to ensure secure deployment and operation of cloud environments.

Requirements:

• Bachelor’s degree in Computer Science, Computer Engineering, Information Security, or a related field.
• 5 years experience in IT Security, with deep expertise in one or more security domains.
• 3 years hands-on experience in end-to-end IT security projects or project delivery.
• Familiarity with security tools and frameworks.
• Security certifications (CISSP, CISM, AWS Certified Security, etc.) are highly desirable.
• Experience with cloud security is an added advantage.
• Thrives in fast-paced and demanding environments.

This role is a great opportunity to work on impactful security projects in a dynamic environment.

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Summary:

As an information Technology (IT) Service Engineer, you will play a crucial role in providing technical support and assistance to our clients. You will be responsible for diagnosing and resolving hardware and software issues, ensuring the smooth operation of IT systems, and delivering top-notch customer service.

AZ Digital is an equal opportunity employer. We encougrage applications from candidates of all backgrounds and experiences.

Key Responsibilities

1. Installing Hardware and Software Systems: This involves setting up and configuring computer Hardware and software, ensuring they function correctly.

2. Provide Hardwae and Software support: You would be responsible for helping end-users with any issues related to hardware or software, troubleshooting problems, and providing solutions.

3. Provide Training to End Users: Part of your role may involve training end-users on how to use hardware and software effectively.

4. On-site/in-house Troubleshooting.

5. Configuring Computer Networks.

6. Ad-hoc Duties as Assigned.

Qualifications and Skills:

- Basic IT Knowledge, willing to learn on the job.

- Travel Requirements: The job requires travelling island-wide, so you must be willing

to commute to different locations.

- Ability to work independently and as part of a team.

- Proficiency in troubleshooting and problem solving.

- Customer-oriented with a commitment to delivering exceptional service.

- Having class 3 Driving Licence is a plus.

- Experience in Repair/installation of POS/Kiosk Systems: While not mandation, having

experience in this area is considered an asset.

Roles and Responsibilities:

• Ability to effectively communicate with technical and non-technical groups, both internal and external (App owner, developers, Appian team)
• Platform Management (OS, VM, Diskspace, CPUs related resources etc.)
• Ability to identify, resolve and recommend solutions to problems.
• Oversee the day-to-day administration of the Appian platform, ensuring it is operational and performing efficiently.
• Coordination between Customer SMEs and Appian to get required access
  Install, Configure and Managing the organization’s APPIAN BPM- related application and manage deployments, administration, troubleshooting, maintenance, and technical support activities.
• Stay current with Appian updates, patches, and releases, and plan and execute upgrades when necessary.
• Application Server (i.e. JBoss or WebLogic) downloaded from respective licensed Site
• Web Server downloaded from Web Server site (if required).
• Web Server installation & configuration (if required).
• Appian downloaded from Appian communityTemporary license download from Appian community
• In addition, all the required s/w packages (jdk, DB) can be downloaded from the authenticated sources.
• Appian and Application server installation & configuration
• Installation of the required database as per the Appian compatibility
• Integration of the Appian and Application server and Data base server
• Platform(Appian) Health check
• Monitor the performance of system components and transactions.
• Monitor business process execution and data associated with those processes.
• User Access Management

Logs Management

• Management of integrations with other systems like integrations with LDAP for access authentication
• Work on the tickets (service request) with respect to platform
• Environment (Appian instance, Application Server JVM) Restart/stop/start
• Strong problem-solving and troubleshooting skills to address platform issues
• Research and resolve assigned incidents/requests related to Appian environments.
• Involvement in Change/Configuration management related to Appian environments changes.
• Implement data backup and disaster recovery strategies to safeguard against data loss or system failures.

Job Description & Requirements

Civil engineers create, improve and protect the environment in which we live. They plan, design and oversee construction and maintenance of building structures and infrastructure, such as roads, railways, airports, bridges, harbours, dams, irrigation projects, power plants, and water and sewerage systems.Civil engineers plan, design, and supervise the construction and maintenance of building and infrastructure projects. These projects may include facilities, bridges, roads, tunnels, and water and sewage systems.

Job Summary

The AI Engineer Specializes in developing artificial intelligence (AI) models and systems that can perform tasks traditionally requiring human intelligence, such as learning, problem-solving, pattern recognition, and decision-making. In addition to technical expertise, AI engineers play a key role in collaborating with other teams to implement AI-driven solutions that solve complex business problems.

Mandatory Skill-set

• Bachelor’s degree in Computer Science, Information Technology, or a related field;
• 3-5 years of relevant experience;
• Strong knowledge of AI frameworks;
• Experience in the Financial Services/Payments industry;
• Knowledge of DevOps practices and tools;
• Experience with infrastructure as code (IaC) tools;

Desired Skill-set

• Excellent problem-solving skills and attention to detail;
• Strong communication and collaboration skills;
• Relevant certifications in AI technologies can be beneficial;
• Proficiency in Python, Java, and R;
• Strong knowledge of AI frameworks such as TensorFlow or PyTorch.

Responsibilities

• Design, deploy, and maintain machine learning models and algorithms from scratch;
• Implement AI solutions that integrate with existing business systems to enhance functionality and user interaction;
• Manage the data flow and infrastructure for effective AI deployment;
• Collaborate across teams to align AI initiatives with organizational goals;
• Monitor and optimize resources for performance, cost, and security;
• Manage the data flow and infrastructure required for effective AI deployment;
• Troubleshoot and resolve issues promptly;
• Develop and maintain documentation for ai solutions and processes;
• Developing, deploying and debugging IaC code for AI solutions;
• Ensure that AI solutions comply with company security policies and best practices in security;
• Stay updated with the latest AI technologies and best practices.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

At BandLab Technologies, we are committed to delivering innovative solutions that prioritize security and user trust. As we expand our product offerings, we recognize the critical importance of safeguarding our cloud infrastructure. We are seeking a Cloud Security Engineer to join our backend team and lead our cloud security initiatives.

In this role, you will focus exclusively on securing our products and development processes, ensuring they remain resilient against evolving security threats. This is not an IT security role; it does not involve managing organizational devices, corporate accounts, or office networks. Instead, you will contribute to impactful projects that protect the core of our business, working within a collaborative environment that values innovation, knowledge-sharing, and professional growth. If you’re ready to make a tangible difference and grow alongside a supportive team, we’d love to hear from you.

Key Responsibilities

Security risk management

• Identify and assess security risks and vulnerabilities across our multi-cloud environments (AWS, Azure, GCP).
• Develop and implement strategies to mitigate identified risks.

Security enhancement projects

• Plan, coordinate, and execute security enhancement projects from initiation to completion.
• Collaborate with engineering teams to integrate security best practices into the development lifecycle.

Infrastructure security

• Utilize Infrastructure as Code (IaC) methodologies to design and maintain secure cloud infrastructure.
• Develop tools and procedures for managing permissions and access controls.

Vulnerability management

• Conduct Static Application Security Testing (SAST) and Dynamic Application Security Testing (DAST).
• Perform penetration testing and configuration assessments to identify security weaknesses.
• Review vulnerability reports and guide remediation efforts.

Incident response

• Monitor systems for security breaches and respond to incidents promptly.
• Configure and manage Security Information and Event Management (SIEM) systems.
• Develop strategies to prevent future security incidents.

Compliance and documentation

• Ensure adherence to relevant security regulations and standards.
• Maintain and update security policies and procedures.
• Prepare for and facilitate security audits.

Required Skills, Knowledge and Expertise

Experience
Minimum of 3 years in cloud security roles, with hands-on experience in architecting and implementing security solutions in at least one major cloud provider environment.

Analytical skills
Ability to define risks, identify threats, and develop actionable mitigation plans.

Adaptability
Comfortable working with various tech stacks and tools.

Technical proficiency

• Strong understanding of networking, client-server communication, and authentication protocols (e.g., OAuth/OpenID, SAML, SSO).
• Proficiency in Infrastructure as Code (IaC) tools and methodologies.
• Programming skills in languages such as Python, JavaScript/TypeScript, Java, C#, or Go.
• Experience with cloud monitoring and logging tools like Azure Log Analytics (Kusto), Google BigQuery (SQL), or AWS CloudWatch Logs Insights.
• Experience with serverless architectures and related technologies.
• Familiarity with containerization and orchestration tools, such as Kubernetes.
• Knowledge of cloud-native security services like AWS GuardDuty, Microsoft Defender, or GCP Security Command Center, Wazuh.

Facilitate and plan the suitable construction sequence for Structural and Architectural with consideration to the various authorities requirement and contract specifications.

Propose the suitable and most cost effective ERSS process and all trades coordination during design development and planning stage (Architectural Structural & MEP).

To prepare and plan for the following: i) Lifting Plan ii) Construction Sequence iii) Construction Scheduling iv) Construction Method v) Drafting of item i, ii & iv

To coordinate and liaise with project team to develop, plan and control of project work schedule.

To calculate/estimate the duration of each construction activity and the resource requirements.

Requirements:

Degree in Civil Engineering with 5 years’ experience preferably in Construction planning and programme coordinator in (PUB / LTA) project.

Proficient with Primavera 5/6

@ [email protected]

Brief Summary:

As an Optical Thin Film Engineer, you'll drive design strategies, operational optimization, and client satisfaction. Your responsibilities include optics-focused coating design, process optimization, technical support, and staff training.

Job Description:

· Design optical coatings to meet customers’ and internal specifications.

· Develop and implement coating designs and processes to optimize efficiencies and yields while minimizing costs.

· Optimize chamber configurations for the deposition of optical thin films.

· Provide technical support in maintaining coating operations.

· Maintain documents and records of processes and procedures relevant to design, development, and production.

· Report project status and progress to supervisor regularly and accurately.

· Train production staff in the operation of precision optical coating processes.

· Perform other duties as assigned by management.

Qualifications:

· Minimum Degree in Engineering, Physics, Material Science, or related field.

Required Skills & Abilities:

· Minimum 3 years’ experience in optics manufacturing/Solar/Semiconductor/Vacuum industry/ Thin film back ground with at least 1-2 years in optical coating design and production.

· Experience in optical Thin film coatings manufacturing environment is advantageous & preferred

· Knowledge of modern thin film coating production technologies including thermal evaporation, electron beam evaporation, ion-assisted deposition, and magnetron sputtering is preferred.

· Knowledge in Optical Principles, Optical Coatings, Optical Design, Optical Fabrication, Optical Physics, Opto-Mechanical principles, and other technical areas within the Optical Industry is preferred.

· Proficiency in utilizing design software such as TFCalc, Filmstar, Macleod or Optilayer.

· Strong analytical skills and ability to work independently as well as in teams.

· Excellent written and oral presentation and communication skills.

Interested applicants may also send your CV to [email protected]

Factory automation company looking for electrical engineer to design and program automated machinery. Job scope is design machine electrical circuit and programming of PLC. Do trouble shooting for PLC system. Experience in Mitsubishi, Keyence and Omron PLC. Knowlegde of PC programming will be good. Help to do some hands-on job.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

• To plan, coordinate and execute quality assurance and quality control of project
• To ensure all products are executed in accordance to contract specifications
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• Any other ad-hoc duties as and when assigned

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Responsibilities:

• Responsible for automation engineering systems & processes per safety and performance standards to build products
• Establish performance & quality criteria via validation (IQ, OQ and PQ) by FEED (Front End Engineering Design), testing, installation, commissioning & handover for production
• Work closely with internal team for technical solution, design experiment, validation, qualification procedure & check list to ensure products meet governance, company & customer requirements
• Create testing protocol, run test for concept approval, analyze results, update activity logs & document results
• Monitor compliance with safety and quality regulations
• Calibrating and repairing machine & equipment
• Participate in cross functional team for product failure root cause analysis and automation system Continuous Improvement
• Design new machines & auxiliary equipment maintenance procedures, check list & work instructions, provide training for operation & maintenance staffs
• Collaborate with internal and external process FMEA and Machine qualification
• Reasonability of workplace health and safety, abide by all EHS policies and procedures, cooperate with Management and colleagues in EHS initiatives
• Any other duties when assigned by management
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives
• Collaborates with suppliers and in-house complete all FAT and SAT requirements within the delivery date
• Perform Lean principle (5S, Gemba-walk, 5-why and B&A suggestion improvements)
• Submit and Follow-up qualification with QA and Production staff

Requirements:

• Diploma / Degree of Engineering in Automation / Mechatronics / Mechanical / Electrical or equivalent
• Previous 3-6 years’ experience as a validation engineer or in a similar role
• Experience in project management
• Strong understanding of automation engineering system design concept & development, manufacturing processes and safety regulations
• Excellent mathematical and analytical skills. Attention to detail
• Knowledge of statistical software analysis (e.g., MINITAB, MATLAB)
• Well versed in Microsoft office tools (Excel/ Word / Power point)
• Have knowhow in Process Failure Mode Effect Analysis (PFMEA) and CPK study
• Leadership, ownership, team player, self-motivated
• Attention to details and eager to learn new technology

Interested candidates may send their CV to Caris (Reg No. R1109826) at [email protected] quoting the job title in the Subject line. We regret that only shortlisted candidates will be notified.

IGnesis is a multi-disciplinary engineering consultancy firm based in Singapore providing consultancy services in Fire Safety Engineering, Environmental Sustainability Design, Mechanical & Electrical, and Advanced Simulation Technology. We conduct CFD modelling and studies for a range of applications pertaining to natural ventilation, fire and smoke spread in buildings and tunnels, evacuation modelling and microclimate analysis such as thermal comfort, wind-driven rain, etc.

Due to projects in Singapore and overseas, we are looking for experienced and motivated candidates to join our team.

The role will involve:

1. Using Computational Fluid Dynamics (CFD) software for simulation relating to building performance applications such as natural ventilation, wind-driven rain, thermal comfort, etc.

2. Carrying out CFD modelling and analysis, including preparation of 3D model, simulation set up and pre-/post processing as part of the CFD process.

3. Liaising with clients to understand simulation requirements and deliverables.

4. Preparation of related reports for submission and presentation to stakeholders and authorities.

5. To develop, propose and review simulation methodologies.

The prospective candidates are expected to have:

1. Bachelor's degree in Mechanical Engineering, Building Science or related discipline with a specialization in CFD Modelling

2. Good understanding of building physics, thermodynamics, and fluid mechanics/dynamics.

3. Experience in softwares such as BIMHVAC, OpenFoam, IES, FDS, Pyrosim, Fluent, etc

4. Good written and oral communication skills

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24124

What will you do?

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.

• In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Descriptions:

1. Develop and provide business solutions for SME, Enterprise, and various industry verticals using cloud technologies, participate in test-plan development, integration, and deployment.
2. You will be working with our Cloud Consulting & Sales team to evaluate the requirements and determine actionable tasks, estimates and provide efforts for business solution build and architecture in cloud-based technologies including Application & Infrastructure modernisation, APIs, BigQuery, AI/Machine Learning solutions (Dialogflow, AutoML, Tensorflow etc.).
3. Development of a proof of concept (POC) for business solutions.
4. Responsible for technical documentation on solution implementation.
5. Perform operational readiness tasks and ensure production acceptance criteria are met.
6. Respond to platform technical issues in a professional and timely manner.
7. We are looking for candidates with high-value personal qualities – critical thinking and problem-solving skills, willing to learn, agile and adaptable to changes on the go, with a resilient and can-do attitude.

Requirements:

1. Background in any programming languages, preferably Python/Javascript or NodeJS.

Workplace: Ang Mo Kio

Job Desciption:

• Execute full software development lifecycle
• Develop existing programs by analyzing and identifying areas for modification
• Integrate software components into a fully functional software system
• Develop software verification plans and quality assurance procedures
• Document, write operational documentation and maintain software functionality
• Deploy programs and evaluate feedback
• Comply with project plans
• Maintain and improve existing codebases and peer review code changes
• Provide a detailed level of technical assistance to the customers
• Support customers by responding within the designated SLA
• Investigate and troubleshoot issues, developing solutions for customers while understanding their needs
• Perform impact analysis and coordinate implementation
• Carry out routine maintenance work
• Troubleshoot, debug and upgrade existing systems
• Maintain systems by monitoring and correcting software defects

Requirements:

• Ability to document requirements and specifications
• Proficiency in troubleshooting software issues and debugging a large codebase
• Proficent in Java development

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)