MedTech Catapult is a national initiative for accelerating the development of high-value MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems. The Lead Engineer will report to the Lead, Product Engineering.

Job Responsibilities:

• To provide electronics and instrumentation design capability in support of the design, development, test and manufacture of safety critical products and processes for complex medical technology product solutions.
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule.
• To design and develop PCB and control systems for next generation medical devices.
• To provide operational electronics development, prototype design and testing - both analogue and digital.
• To conduct PCB schematic capture and layout, including component selection and testing.
• To build and test prototypes and document the design and performance of these.
• To create embedded system design and implementation.
• To conduct EMC testing with in-house equipment and through liaison with EMC test house for electrical safety and medical device compliance.
• To support development of intellectual property portfolio in device design and process technology know-how.
• To provide clearly documented records of technical data, decisions, methodologies, calculations and software use in accordance with ISO/FDA quality standards.
• To support the Procurement and Engineering teams for sourcing and defining specifications.
• To conduct error and tolerance sensitivity analysis, reliability analysis, reliability testing and reliability test program design.
• To support CAD-based electro-mechanical integration, at the component level, board level and assembly level.
• Write and review documentations for QMS.
• Interface with external parties (design houses) to communicate product requirements.
• To support other activities for product engineering when required.

Requirements

• MSc/BSc in Electrical Engineering or Computer Engineering.
• >10 years experience in medical devices (e.g. electronic product design).
• Has a good knowledge and understanding of i) Processes of electronic product development and realization, ii) operation and design of electronic systems and circuits; iii) Regulations applying to medical devices, iv) Electronic device operation and fabrication and v) Electronic sensors, measurement systems and instrumentation.
• Experience with PCB design ? digital and analogue.
• Proficient in HDL languages (Verilog, System Verilog).
• Knowledge of ASIC design and sign-off.
• Familiarity with scripting languages like Python, Perl, or C/C++ is a plus.
• Experience with design, development or manufacture of photonic systems or photonics-enabled products is a plus.
• Experience with the use of simulation tools for electronic design is a plus.
• Experience with Medical device ISO standards including ISO9001, IS013485, ISO 14971 and IEC 60601-1 and managing QMS.
• Good collaboration skills, organised and detailed.
• Demonstrate strong interpersonal skills and leadership skill.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• To lead, coordinate and work with cross functional teams such as tools suppliers, equipment engineers, process engineers, facility engineers, environment health and safety officer, contractors for tool placement plan.
• To participate in the evaluation, planning and supervision of projects including testing and commissioning.
• To provide support for new chemical and gas evaluations. Plan and execute specialty gas system release/unhooking up.
• To carry out overall cleanroom capacity modelling and planning, work with manufacturing, process and equipment engineering to ensure requirement is met.
• To review capacity model, understanding the constraints and re-lay the equipment layout in the cleanroom to maximise the cleanroom space usage.
• Management of contractor?s services to ensure fulfilment of contracts terms and agreements.
• Identify opportunities for innovation that are relevant and appropriate to the company business objectives
• To review capital and cashflow requirements, driving activities to improve capital efficiency and reduce cost.

Requirements:

• Degree, Diploma in Engineering (Chemical, Mechanical, Electrical/Electronic, Building Management) or equivalent.
• Degree with 3 years and Diploma with 5 years related experience in
• Manufacturing of Semiconductor, Wafer Fab.
• Able to work in fast-paced environment, proactive and able to work independently with minimum supervision, self-driven and self-motivate to get job done.
• Able to work in a manufacturing, production, cleanroom environment.
• Technical knowledge in Facilities Support System such as ACMV, HVAC, Scrubber, Electrical, Compressed Dry Air, Nitrogen, Hydrogen, Process Cooling Water, Ultra-Pure Warter, Chilled Water, Wastewater Treatment etc.
• Possess Project Management skills.
• Strong understanding of building codes, HSE laws, regulations and best practices and the ability to interpret/translate these into compliance activities
• Proficient in utilizing Excel, Power Point, Project, Word & Visio, AutoCAD.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

One of the oldest nurseries in Singapore, Prince’s has 50 years’ experience in the industry. Started out humbly as a flower shop, Prince’s has evolved into a full-fledged landscape design and installation specialist. At the international front, our global connections ensure that Prince’s meets the needs of our customers. Strategic alliances with Europe, Australasia, and Asia have been a boon to our service-oriented culture.

Role Duties:

• Develop and implement effective sales strategies to drive business growth for venue decorating services, with a focus on corporate clients.
• ⁠Identify and pursue new business opportunities to expand our client base within the festive events market.
• ⁠Manage and maintain relationships with existing clients, ensuring high levels of customer satisfaction and repeat business.
• Present, promote, and sell our festive decoration services, including design proposals for event spaces, Christmas trees, Chinese New Year decorations, and more.
• ⁠Coordinate closely with internal teams (designers and project managers) to ensure smooth execution of events and client satisfaction.
• ⁠Meet and exceed sales targets and KPIs set by the Festive department.
• Stay updated on industry trends, festive decoration trends, and competitor activities to keep our services competitive and relevant.
• Prepare and deliver compelling sales presentations tailored to client needs.
• ⁠Handle client inquiries, quotations, and negotiations to close deals efficiently.

Candidate Profile:

• Proven experience in sales, business development, or a related field, ideally within event management or festive decorations.
• Strong knowledge of festive event coordination, especially Christmas and Chinese New Year events in Singapore.
• ⁠Excellent communication and negotiation skills, with a customer-focused approach.
• Ability to build and maintain strong relationships with corporate clients.
• Self-motivated, proactive, and able to work independently as well as part of a team.
• Flexible with consistent change.
• Familiarity with the local market and festive customs in Singapore.
• Prior experience in handling corporate clients and large-scale events.
• ⁠Bachelor’s degree in Business, Marketing, Events Management, or a related field.

We apologize that only shortlisted candidates will be notified.

Job Description:

Major job scope includes but not limited to:

• Responsible for new product development from electronic circuity design to final power module packaging and its application
• Responsible on supporting NPI test development from small volume sample up to production release
• Define test schematics, design/optimize test loadboards, create test plans and optimize test methodologies
• Hands on experience on Design For Testability (DFT) from IC design techniques and testability features to a hardware product design
• Responsible for new product characterization and product datasheet
• Work with design and application engineers in defining and developing test methodologies, test plans, test modes and DFT meeting to product datasheet
• Experience in data analysis using industry-standard software/tools for product characterization, electrical and temperature simulation, 6-sigma analysis and etc
• To support Customers specific application characterization request and helping resolving customer application problem
• Responsible to coordinate and actively participate in Product/Process DFMEA, ensuring success in engineering build for New Product Introduction (NPI), including formulating all product engineering documentation and sustain the product until mass production
• Other duties as assigned by supervisor

Job Requirements:

• Bachelor’s degree in Microelectronics, Electrical/Electronic Engineering or any related course and experience
• Minimum 5 years working experience on High Power Semiconductor Product Development
• Excellent oral and written skills in English and Chinese
• With relevant work experience on Product characterization equipment and bench testing tools
• Possess expertise in C++, Visual Basic programming, SmartTest 7.x.x/8.x.x & debug techniques
• Strong communication skills, effectively communicating technical concept and work collaboratively
• Good understanding on Semiconductor Power Module manufacturing and Technical Know-How
• Good understanding on Automotive product testing and expectation
• Ability to work effectively and efficiently with diverse teams, customers, as well as internal and external partners.
• To be based in Singapore and required frequent travel to China

Guidelines for Applicants:

• You may apply thru Mycareers Future or email to [email protected]

Job Description

Nanomatics, a cutting-edge startup revolutionizing plastic waste management, is seeking an intern for Business Development Specialist position. The candidate will lead the growth of Company's innovative products and services. This role involves conceptualizing sales strategies, driving market expansion, building relationships with customers, and ensuring the effective use of resources. The ideal candidate will combine a strong understanding of business and marketing expertise with sustainability concepts to position Nanomatics as a leader in circular solutions for waste management. This is a part-time position with convenient work schedule and possibility to convert into a full-time position.

Roles and Responsibilities

• Conceptualise sales strategies and business plans for products and services.
• Propose informed business decisions referring to data insights and analysis.
• Implement market expansion and new market plans for business growth.
• Find prospects, develop relationships with potential customers and formulate new account development strategies.
• Collaborate with internal teams to refine the products and services to meet market demand.
• Provide feedback from customers to guide technical and product development efforts.
• Lead the creation of marketing materials, including brochures, technical promotional content, and illustrations, to effectively promote Nanomatics' solutions.
• Track business development progress and key performance indicators (KPIs) to measure the success of strategies and projects.
• Prepare regular reports and presentations for senior management on achieved outcomes and future plans.

Requirements

• Candidate is pursuing a degree (BSc, MSc) in business/marketing.
• Strong "can do" attitude and intrinsic motivation for seeking new opportunities.
• Good interpersonal and communication skills, especially when talking to senior company representatives.
• Relevant skills (CRM, animation, video production, or other) is a plus.
• Singaporean PR/Singapore citizen.
• Able to commit 3-4 months.

What We Offer

• A chance to work with innovative technologies addressing critical environmental challenges.
• An opportunity to shape the growth of a high-impact startup in the sustainability sector.
• A dynamic and relaxed work environment with room for professional growth.

Role: Laboratory Engineer (Geotechnical/soil testing)

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

AI Singapore (AISG) is a national AI programme launched by the National Research Foundation (NRF) to anchor deep national capabilities in Artificial Intelligence (AI).

The programme office is hosted by the National University of Singapore (NUS) and brings together all Singapore-based research institutions and the vibrant ecosystem of AI start-ups and companies developing AI products to perform use-inspired research, grow the knowledge, create the tools, and develop the talent to power Singapore's AI efforts.

We are looking for a Senior AI Engineer to join AI Singapore to lead the evaluation efforts in the Applied Research for Foundation Models team in AI Products.

Duties and Responsibilities

• Support the development of NLP products for Southeast Asian languages, with a focus on foundation models and linguistically-motivated approaches.
• Aid efforts on the fine-tuning, alignment and reasoning of large language models, including research, experimentation, implementation and data creation where applicable.
• Keep abreast of latest developments in NLP for low-resource languages, evaluation approaches etc.
• Collaborate with various parties both within and outside of Singapore on research and software development

Qualifications

• Masters or Ph.D. in Computer Science, Machine Learning, AI, Statistics, Mathematics, Engineering or Computational Linguistics
• Background in Linguistics is highly preferred
• Competency in a Southeast Asian language, or knowledge of multiple languages is strongly preferred
• Familiar with modern NLP models, including transformer architectures and large language models
• Familiar with fine-tuning and alignment techniques related to chain-of-thought generation and reasoning in LLMs
• Familiar with NLP evaluation methods and metrics
• Experienced in NLP model implementations based on PyTorch or Tensorflow/Keras, with some exposure to the setting up of end-to-end pipelines from data preparation to deployment
• Fluent in Python, but other languages such as Java, C++ or Javascript will be a bonus
• Have a good grasp of the fundamentals of Machine Learning
• Knowledge and experience in Software Engineering will be beneficial (e.g. Agile framework, Frontend/Backend development, Git)
• Some knowledge of DevOps (Docker, Kubernetes, CI/CD) will be a plus
• Team player with good communication skills and passion for technology

We're seeking a seasoned Senior Software Engineer to design, build, and integrate complex software components. As a Senior Software Engineer, you'll play a key role in delivering quality solutions and harnessing emerging technologies to drive business value.

Key Responsibilities

• Design, develop, and maintain complex software components, adopting design thinking and customer-oriented approaches.
• Build prototypes and design system architectures to demonstrate technology opportunities.
• Collaborate with cross-functional teams to deliver enterprise engineering products in a fast-paced environment.
• Provide technical consultancy and expertise in the systems development process, contributing to defining technical specifications and configuring solutions.
• Stay updated on emerging technologies, such as Artificial Intelligence, to drive business value and enhance service experience.

Requirements

Essential Qualifications

• Relevant qualifications in Computer Science, Information Systems, Computer Engineering, or related fields.
• Good knowledge of Agile software development, DevOps, and cloud technologies.
• Experience in modern web and application technologies (e.g., Nuxt JS, Vue JS, Node JS, Next JS).
• Excellent analytical and problem-solving skills.

Nice to Have

• Past experience working with Ruby on Rails.
• Experience in architecting and developing solutions to complex and ambiguous problems.
• Strong communication and interpersonal skills.
• Past work experience in large software teams.

We're seeking a skilled Engineer, Quality Assurance to join our team in Singapore. Reporting to the Engineering Manager, you'll play a critical role in ensuring the quality assurance aspects of our technical areas.

Key Responsibilities

• Participate in our shift-left testing process and entire Software Testing Life Cycle (STLC) to ensure high-quality products.
• Collaborate with Product Managers to define, test, and validate product requirements.
• Design, execute, and automate tests for web applications and backend APIs, ensuring comprehensive coverage.
• Produce detailed test reports and serve as the sign-off authority for feature releases.
• Work closely with Development teams to identify and resolve issues, ensuring seamless collaboration.
• Contribute to the evaluation and adoption of testing automation frameworks.
• Mentor junior QA engineers, sharing expertise and promoting growth.

Essential Qualifications

• Bachelor's or Master's degree in Computer Science or a related field.
• Excellent communication skills, with the ability to explain technical concepts to diverse audiences.
• 2-5 years of experience in web application testing and automation.
• Strong foundation in Software Engineering concepts and STLC life cycle.
• Ability to write test plans and test strategy documents.
• Good knowledge of API and Web testing, Networking, and Operating System concepts.
• Strong troubleshooting, debugging, and analytical skills.

Preferred Qualifications

• Experience with testing automation tools.
• Background working in product companies.

Roles & Responsibilities

• Responsible for all on-site technical and engineering matters.
• Ensure works carried out meet company’s quality standards & contractual requirements.
• Involved in project planning, monitoring project progress and schedule.
• Including prepare work plan, schedule, preparation all the related work procedure/method statement, job safety analysis, technical clarification.
• To co-ordinate with the client, consultant, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Include attending all progress meeting.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors, foremen, workers and sub-con meets client & regulatory work requirements.
• Other ad-hoc duties assigned from time to time
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Key Responsibilities:

• Formulation Support: Collaborate with the R&D team to develop and scale up cosmetic and skincare formulations, ensuring consistency and performance.
• Process Optimization: Design, implement, and optimize chemical processes to improve production efficiency, reduce costs, and enhance product quality.
• Quality Control: Monitor production processes to ensure that products are produced according to specifications, comply with regulatory standards, and maintain high-quality standards.
• Troubleshooting: Diagnose and resolve process-related issues, ensuring minimal downtime and maintaining production schedules.
• Sustainability Initiatives: Identify and implement sustainable practices in the manufacturing process, including waste reduction, energy efficiency, and greener chemical alternatives.
• Compliance: Ensure compliance with safety standards, environmental regulations, and industry best practices (e.g., GMP, ISO).
• Cross-Department Collaboration: Work closely with the quality assurance, production, and supply chain teams to ensure smooth operations and continuous improvement.

Requirements:

• Experience: At least 1-2 years of experience in a chemical engineering role, preferably within the cosmetics, skincare, or personal care industry.
• Skills:Strong understanding of chemical processes and formulation techniques in the cosmetic/skincare industry.
  Proficiency in process modeling, data analysis, and process optimization.
  Familiarity with industry regulations and quality standards (GMP, FDA, etc.).
  Excellent problem-solving and troubleshooting skills.
  Ability to work in a fast-paced, collaborative environment.
  Strong communication and documentation skills.
  
• Desirable: Experience with sustainability practices in manufacturing, knowledge of new trends and innovations in cosmetics/skincare formulations.

Join the Institute of Microelectronics (IME) to be immersed in cutting-edge semiconductor research. As a research institute within the Agency for Science, Technology and Research (A*STAR), IME bridges the gap between academia and industry. Our mission is to accelerate innovation in advanced packaging, piezoMEMS, SiC, RF/mmWave GaN, and photonics & sensors, and to develop talent and inspire in Singapore.

We are looking for a passionate individual to join our Technology-Business Development department. You will be responsible for sales and marketing, account management and industry development. If you're excited about the future of microelectronics and wish to contribute to the development of Singapore's innovation engine for microelectronics, we want you on our team!

Job Responsibilities

• Perform market intelligence, develop and execute go-to-market plans for commercialization of IME's research capabilities.
• Lead industry and customer engagements, understand their needs and work with Technology Development teams to formulate value propositions.
• Structure, review and negotiate contracts with industry partners and customers.
• Develop industry network, manage accounts and build relationships to win and retain industry partners and customers.

Job Requirements:

• Degree in Science or Engineering.
• Ability to think on the feet
• Result-oriented, analytical, proactive, resourceful and team player
• Good communication, presentation and interpersonal skills
• Resilience and adaptability to work in a fast-paced and fast-changing environment
• Passion to develop Singapore's semiconductor industry

Join the Institute of Microelectronics (IME) to be immersed in cutting-edge semiconductor research. As a research institute within the Agency for Science, Technology and Research (A*STAR), IME bridges the gap between academia and industry. Our mission is to accelerate innovation in advanced packaging, piezoMEMS, SiC, RF/mmWave GaN, and photonics & sensors, and to develop talent and inspire in Singapore.

We are looking for a passionate individual to join our Technology-Business Development department. You will be responsible for sales and marketing, account management and industry development. If you're excited about the future of microelectronics and wish to contribute to the development of Singapore's innovation engine for microelectronics, we want you on our team!

Job Responsibilities

• Perform market intelligence, develop and execute go-to-market plans for commercialization of IME's research capabilities.
• Lead industry and customer engagements, understand their needs and work with Technology Development teams to formulate value propositions.
• Structure, review and negotiate contracts with industry partners and customers.
• Develop industry network, manage accounts and build relationships to win and retain industry partners and customers.

Job Requirements:

• Degree in Science or Engineering.
• Ability to think on the feet
• Result-oriented, analytical, proactive, resourceful and team player
• Good communication, presentation and interpersonal skills
• Resilience and adaptability to work in a fast-paced and fast-changing environment
• Passion to develop Singapore's semiconductor industry

Profile Summary:

The Senior Systems Engineer supports security systems and operations administration, monitoring and maintenance. Monitors security alerts and events. Collects and documents contextual information based on established practices and supports the preparation and publishing of security advisories. Assists with the analysis of security-related information and events, escalation of incidents for validation and remediation.

Able to be alert and vigilant in performing monitoring activities, and is able to analyze and resolve security-related issues critically. He/She communicates clearly in his/her interactions with others and coordinates effectively with his/her team to perform security operations.

Roles & Responsibilities:

Monitor security systems

• Perform non-routine security monitoring activities

• Perform prioritization and allocation of security incidents

• Track security monitoring rules and alerts

• Compile regular reports on the performance of security operations

Maintain security operations

• Assist with the implementation of agreed security system changes and maintenance routines

• Assist with implementation of new security programs

• Support vulnerability, penetration testing and assessments

• Support the development of reports on security penetration testing results

• Recommend security products, services and/or procedures

• Support the alignment of security systems with established service agreement standards

• Support the implementation of new enterprise security architecture, technologies and enhancements

Respond to queries

• Support live response to security issues

• Support investigation of security breaches such as forensic threat investigation

• Support the resolution of security related issues

• Support the simulation of user problems to identify security system drawbacks

• Recommend security system modifications to reduce user problems

Facilitate compliance

• Assist with the implementation security policies, procedures and programs

• Educate users on the security standards and practices

• Identify improvement areas to existing security policies and procedures

• Deliver user training

Optimize security system performance

• Support piloting of new tools, technologies, and processes as well as installation of hardware and software

• Support security system testing and ongoing optimization or changes such as scheduled upgrades and updates

• Maintain documentation of all optimization activities

• Suggest improvements to operational processes, procedure manuals, and documentation

Requirements/ Qualifications:

• Minimum Bachelor in Computer Science or equivalent
• 2-3 years of relevant experience
• Experience in firewall, network scanning or asoc
• Possessed Risk assessment experience
• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays.
• Experience in AD/ID administration as per best security practices
• Exposure in IM8 or equivalent

IT SECURITY engineer

We are a leading Regional IT and Cyber Security system integrator headquartered in Singapore with a presence in Malaysia & the Philippines. We are hiring talented individuals with a positive attitude to join us. We run SOC, a cybersecurity consultancy, and other professional services to local and regional customers.

Primary Functions:

· Responsible for providing technical assistance and support related to computer systems, hardware, or software

· Responds to queries, run diagnostic programs, isolate the problem, and determines and implements a solution

· To ensure that clients get prompt and quality service

· To document troubleshooting and problem-resolution steps

· To participate and provide knowledge transfer to customers when necessary

· Professional services implementation including but not limited to Linux, Wintel Server, Networking, CyberSecurity project implementation

· Create training manuals, documentation, and knowledge transfer documents

· Install and modify computer & Infrastructure based on in-house best practices

· To implement security control on the system and network devices

· Follow up with customers to ensure the issue has been resolved

· Provide technical assistance and support for queries and issues related to computer systems, Local area network (LAN), Wide area network (WAN), and other hardware/software via phone, email, and/or onsite according to stipulated SLA

Requirements and Skills:

· Diploma holder in IT and other IT Security certifications will be a plus

· Minimum 1-year experience in IT

· Fresh graduates are welcome as we will provide relevant training

· A good understanding of IT network, data storage, network, Wintel Server

· Resourceful, creative, independent, and able to work well in a team

· Required to work on-site when necessary

· Taking ownership of technical issues and working with customers and partners to resolve more advanced issues when necessary.

· Good written and verbal skills; excellent phone and email manners.

· Understanding of TCP/IP, OSI Layer, network security, Internet, DNS, network routing, switching, SMTP email, Linux, and Microsoft Windows

Other Information:

· Office Location: 67 Ayer Rajah Crescent #02-10 S139950

· Working hours: Mon-Friday, 9 am-6 pm

· Depending on the season and customer request may require to work outside working hours

· Monthly basic salary commensurate with qualifications and experiences

· Other benefits such as annual leave, medical, insurance, training opportunities, regional exposures, etc

· Additional performance bonus based on individual contribution towards company strategy and its financial performance

Contact: [email protected]

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Assurity Trusted Solutions (ATS) is a wholly-owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

Middleware Administration

• Responsible for providing technical services to support environment provisioning, software integration and projects from deployment planning, setup & testing, pre-production readiness to production cutover;
• Hands-on experience on Middleware technologies such as Webserver Apache, IIS, WebLogic, JAVA & .NET based Application server, SSO server, Scheduling and Enterprise Backup;
• Responsible for software upgrades and patching ensuring that the platforms are performing to their potential & meet security compliance;
• Collaborate with Cyber Security and identify solutions for remediation of vulnerabilities in the web and middleware infrastructure;
• Developing and maintaining infrastructure/process logs, documentation, process metrics and capacity trending will be part of the daily activities;
• Participate in 24/7 support by acting as an escalation point for any production issues;
• Responsible for monitoring and optimizing the performance of middleware systems. This may involve diagnosing and resolving issues related to scalability, throughput, latency, and overall system efficiency.
• Work closely with developers, system administrators, and other stakeholders to understand their requirements and provide technical support;
• Stay current with trends and incorporate emerging technology to benefit the platform for on premise and cloud solutions;

Requirements

• At least 3-5 years of Middleware support experience, preferably in large-scale government projects;
• Candidate with strong infrastructure/technical background with knowledge on message-oriented applications in cloud-native architecture will have an advantage;
• Strong understanding of high-availability architectures. Hands-on experience in Clustering, Load Balancing and failover management;
• Work under minimal supervision and take ownership of middleware incidents end to end
• A good working knowledge in UNIX-platform based Web-App administration is a must;
• Good verbal and written communication skills.
• Strong analytical and problem solving skills.
• Good interpersonal and team management skills.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions! The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Responsibilities

• Manage IT infrastructure (including SDWAN and cybersecurity solutions), servers (including VM) and backup solutions (on-premises and cloud)
• Manage various IT assets including user PC, Retail POS and peripherals, printers (including barcode printers), electronic shelf labels, digital signage, mobile phones and tablets etc.
• Manage various SAAS solutions including Microsoft 365
• Problem solving, troubleshooting & user support
• Project management of IT initiatives
• Liaising with various external vendor solution providers
• User training, UAT, user/system documentation and change management.
• Assist in developing and implementing IT policies, protocols, procedures, solutions, and best practices including incident reporting on containment and remediation.
• Be part of project management team on IT initiatives (including system updates and migrations) starting from managing timelines, requirements gathering, specifications, sourcing of solutions, evaluation of solutions, managing implementation process including UAT, user training and system documentation.
• Assist to conduct regular system audits, regular checks on network and data security and testing to detect issues within the IT systems.
• Identify opportunities to improve and update software and systems for higher productivity.

Prerequisites

• Minimum 3 years work experience in IT support, systems administration, or network management, experience in setting up or maintaining basic infrastructure (networking, server setups) is a plus.
• Diploma in Computer Science, Information Technology, Network Engineering, or related field.
• Familiar with configuring and maintaining servers, workstations, and network devices.
• Good analytical, logical and problem-solving skills.
• Team player and able to independently and self-motivated.
• Able to communicate clearly with both technical teams and non-technical staff.

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.

Job Summary:

We are seeking a highly skilled and experienced Senior Sales Engineer to lead our front sales activities in the Polymer and Crystallization (POFC) sectors. The ideal candidate will have a strong technical background, excellent communication skills, and a proven track record in sales.

Main Tasks and Key Responsibilities:

• Undertake sales and marketing of Sulzer Polymer and Crystallization Technology in Japan.
• Focal point for Sulzer Crystallization Technology in Southeast Asia.
• Develop and execute sales strategies to achieve sales targets and expand our customer base in the Polymer and Crystallization markets.
• Identify and engage with potential clients, understanding their needs and providing tailored solutions.
• Conduct technical presentations to showcase the benefits and features of Sulzer Polymer and Crystallization Technology.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer prior to order stage.
• Co-ordinate all proposal activities with Process, and Product-line Management teams to ensure customer requirements are met.
• Deliver sales proposals, negotiate contracts, and close deals.
• Follow up projects monthly and update CRM daily.
• Assist Project Management and Engineering during project execution.
• Stay updated on industry trends, market conditions, and competitor activities.
• Involved in organization of marketing activities such as tradeshow, conference and digital content.
• Any other duties that are assigned by superior.
• 40% travelling is expected.

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

We are proud to be recognized as a Top Employer 2024 in Brazil, China, Germany, Switzerland, the United Kingdom and the United States.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

In this role you will be accountable for:

• Design and conduct bench-scale test and pilot testing related to the company's separation process technology. Some tests may required rotating shift schedule.
• Develop and review validation protocols for bench-scale test and pilot testing
• Investigate and resolve discrepancies identified during bench-scale test and pilot testing
• Collaborate with process engineers to develop new technologies and improve existing ones
• Work with the sales team to develop commercialization strategies for new technologies
• Stay up-to-date with industry trends and emerging technologies related to separation processes

To succeed in this role, you will need:

• Degree in Chemical engineering, Biochemical engineering, Environmental engineering or related fields
• 2 to 5 years of analytical testing experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• Knowledge of separation processes such as distillation, liquid-Liquid extraction, and crystallization.
• Experience designing and conducting bench-scale tests and pilot testing, as well as experience developing and reviewing validation protocols is an advantage.
• Basic knowledge and experience in analytical chemistry, including experience with various analytical equipment is an advantage.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• With process engineering background are welcome to apply.

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

Project Overview

The AMR IRG is an interdisciplinary community of biologists, engineers, and clinicians from MIT and Singapore, sharing a state-of-the art research facility and united by a commitment to providing a supportive intellectual environment where students and staff can learn, grow, and contribute to solving a pressing societal problem.

The objective of this project is to advance the field of RNA analysis by developing and implementing innovative analytical tools. These tools will be used in a comprehensive study of all forms of RNA -- the ribonucleome -- and the >170 RNA modifications -- the epitranscriptome -- in disease pathobiology, host-pathogen interactions, biomarker development, and therapeutic target discovery.

Responsibilities

The Research Engineer will plan and conduct experiments with the aim of studying the roles of RNA modifications in human immunue diseases. The candidate will work primarily on cell culture, RNA isolation, and chromatography-coupled mass spectrometry analysis. As part of this work, the candidate will prepare results for publication, be a liasion with the AMR IRG community, work with external collaborators, and develop strong experimental and communication skills.

Requirements

• B.S. or M.S. in biochemistry, molecular & cell biology, bioengineering, chemical engineering, or a related field.
• Experience in cell culture, RNA extraction, high-performance liquid chromatography or mass spectrometry are prefered. Strong proficiency in oral and written communication in English. Ability to work well with others and as part of a team.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notifie

Job Responsibilities

• New product planning:

- Analyse industrial trends, market data and customer insights to derive constructive ideas and information for the purpose of NPD.

- Define product competitive positioning and unique selling proposition (USP).

• New product development (NPD):

- Responsible for entire NPD process; from concept initiation to completion, for both new product and reformulations.

- Take the lead in close collaboration with cross functional teams such as Regulatory, Marketing, Supply chain, Contract manufacturers, R&D and Quality, for seamless on-time delivery of products.

- Source for contract manufacturers and liaise with formulators to develop new product; be the main contact point with these suppliers for NPD/ formulation discussions.

- Review formulas and ingredient/ design statements for new product that is compliant with regulations.

- Familiar with the concept of product challenge test, stability, and compatibility studies.

- Research market prices, create accurate product costing data and propose product pricing.

• New product introduction:

- Conduct product training to regional trainer/marketing team and key leaders of salesforce.

• Post-launch product management:

- Analyse product performance and identify actions required.

- Manage product feedback and propose technically sound customer-centric reply.

- React to necessary corrective and preventive actions (CAPA) raised by Quality.

• Contribute for and implement standard procedures (in compliance with industrial standards and QMS requirements) for any product development and management activities or as assigned.
• Perform other duties and projects as necessary to meet company goals.

Requirements

• Degree in Cosmetic Science or Chemistry.

• Minimum 2 years of experience in product development/ management in the cosmetic and skin care industry.

• Bonus if candidates have prior experience with beauty/personal care/medical device.

• Strong interest in marketing of beauty, skin care, personal care and/ or beauty device products.

• Self-starter, good at working well independently with initiatives.

• Resourceful & good business sense.

• Meticulous & detail-oriented.

• Product/ project management skills.

• Planning & organising skills; time management skills.

• Analytical & problem-solving skills.

• Professional communication & negotiation skills; proficient in English and Chinese - To liaise with Mandarin speaking counterparts

• Strong interpersonal skills to connect with people from different cultures and levels, both internally and externally.

• Travelling is expected.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Develop advanced video/image analytics technologies using both Computer Vision Algorithms and advanced ML/DNN
• Research technologies and concepts in the areas of Machine Learning, Computer Vision and Edge AI
• Participate in system design activities, prototyping and testing
• Follow and contribute to software development best practices

Qualifications

• At least a Bachelor’s Degree in Data Science, Computer Science, Engineering or similar
• Experience in developing Computer Vision applications, i.e. object detection & classification, object segmentation, computer vision algorithms, ML models optimization, etc.
• Experience with ML/DNN in at least one of the following frameworks: TensorRT, Tensorflow, Keras, PyTorch
• At least 2 years of experience with C++

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Experience:

• Computer vision: 3 years (Required)

Work Location: In person

Job description:

As a member of the filter design team, the successful candidate will play a key design role as a product owner of resonator/filter in development and commercialization of acoustic filters with both BAW and SAW technologies from beginning, concept meeting to end, mass production including characterization.

Experience with either SAW or BAW filter design -layout, simulation, fabrication, and characterization- is required for senior position and principal position is available for candidates with proven track record in ramping up commercialization of acoustics filters in mass production environment.

Responsibilities:

- Co-work with international team across China and Singapore on a cross-disciplinary team basis

- Use commercial circuit analysis and physical modelling tools as well as custom software packages to design and analyse acoustic filters

- Assist RF measurement analysis by generating test plans and analysing results

- Produce RF engineering reports to support team members

- Communicate with R&D team for co-design and device improvement

Qualifications/Desired skills:

- Track record in design and mass-production of SAW/BAW filters for mobile applications is highly desirable

- Strong skills and working knowledge of design simulation tools, e.g. ADS, AWR, HFSS, COMSOL, etc

- Understanding of RF test parameters and test equipment

- Understanding of filter application and mobile communication system and architecture

- Experience with drawing programs, schematic capture and PCB layout tools

- Experience in RFIC design, RF module and front-end system design is preferred

- Knowledge of MEMS fabrication

- Strong written and verbal English skills to support complex analysis

- Organized team player and a good learner who is open to discussions