Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Job Description & Requirements

Responsibilities:

• Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports;escalating project completion impediments.
• Day-to-day management on site, including supervising and monitoring the site and co-ordinate sub-contract works.
• Liaise with clients and consultants on project.
• Complies with codes and regulations by complying with requirements; preparing permit applications, plans, and compliance reports.
• Produce proper reports and documentation before and after project completion.
• Marketing, co-ordinate and liaise with potential customer, sub-contractors, suppliers through phone, email and faxes on company product and services.
• Assist on Tender exercises and Pre-con survey and update of As-Built drawing on site.

Requirements:

• Minimum Diploma or equivalent
• 3- 4 years of working experience in M&E ( Electrical / ACMV), A&A Building field
• Able to work independently and possess good interpersonal skills
• Able to start work immediately or within short notice

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

• You are responsible to drive and manage the silicon Bump & package assembly suppliers, backend processes and solutions to achieve the aggressive TQRDCEB goals.
• You will work closely with package design & technology, test & product engg, production planning, quality engg & NPI teams, assembly/substrate suppliers to support new product & technology introduction activities by defining processes, monitoring systems, manage process improvements and changes.
• Provide day-to-day support to bump and assembly suppliers & internal planning, product and test engineering teams.
• Plan, drive & implement improvement activities for continual improvement, 2nd sourcing, cost reduction & customer satisfaction.

•Qualifications:

• PhD / Master / Degree in Mechanical / Electrical / Electronics Engineering with 7~12 years of relevant experience of managing advanced node silicon bumping, large body single & multi-chip (2.1/2.5/3D) package assembly, substrate & back-end suppliers and processes.
• Hands on experience in Product Life-Cycle Management - creating & maintaining Bill of Material structure, Process Documentation, Process Change Notification etc.
• Good team player, result oriented individual, experienced in project management, failure analysis tools, techniques and TQM. Good analytical, problem-solving skills. Flexible and agile.
• Sound knowledge of applicable industry standards, quality systems, regulations, knowledge of prevailing and emerging silicon package & substrate technologies, bumping and assembly processes, materials and equipment.
• Able to communicate with internal team members & external partners in various geographic locations and may required to travel from time to time at short notice.
• Experienced AutoCAD user. Knowledge of silicon & PCB fabrication, board assembly processes, are an added advantage

· Attractive Salary Package

· Flexible WFH Arrangements

About the company

Our client is a leading fintech organisation with a well-established presence across APAC. With rapid expansion plans, they are now looking for a software test engineer to be a part of their team.

About the job

As a Software Test Engineer, your responsibilities involve:

• conducting functional testing, specialized testing, and performance testing to ensure ongoing project progress and maintain quality.

• Conducting requirement analysis, writing test plans, test cases, etc.

• Handling web/app front-end and back-end interface testing tasks, independently building interface automation testing frameworks.

• Tracking and locating defects or issues in the product and communicating with project stakeholders about project progress and issues.

Skills and experience required

As a successful candidate, you should have at least 3 years of experience in software and interface testing across both functional and automation frameworks.

You should have a good understanding of Databases such as Oracle, SQL server coupled with good SQL/Query experience to prepare test data.

You should also have worked with Java or python related programming language on automation testing frameworks.

Whats on Offer

This is an exciting opportunity to be at the forefront of the Fintech Industry as their Software Test Engineer. You will get the opportunity to be part of end to end testing methodologies to be able to push out real world tech product to global consumers.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 8 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

• A renowned company that operates the world's largest transshipment hub.
• Be part of a dynamic team for engineering systems and equipment.

About Our Client

A leading transshipment cargo company, with strategic operations in Singapore and the world. Equipped with state-of-the-art technologies and systems, the company offers a wide range of services, from warehousing, logistics and freight forwarding.Committed on delivering quality services, innovation and contributing to the industry's development.

Job Description

Responsibilities:

• Lead and contribute to the development and implementation of smart grid and battery energy storage projects.
• Collaborate effectively with key stakeholders, including technology partners, to ensure successful project outcomes.
• Oversee project timelines, milestones, and resource allocation.
• Apply comprehensive knowledge of battery energy storage systems, industry standards, and local regulatory requirements.
• Address technical and safety requirements, ensuring compliance in the design and implementation of projects.
• Prepare and review technical documentation to ensure accuracy, completeness, and adherence to industry best practices.
• Propose and implement corrective actions to address performance and reliability exceptions.
• Continuously monitor and evaluate system performance metrics.

The Successful Applicant

Qualifications:

• Bachelor's/Master's degree in Electrical Engineering or a related field.
• Proven experience in battery energy storage system design, implementation, and optimization, Power Conversion System, DC-DC, PLC Control or related.
• Strong project management skills with a track record of successful project delivery.
• Excellent analytical and problem-solving abilities.
• Exceptional communication skills to effectively collaborate with cross-functional teams and external partners.

What's on Offer

You will be working in a industry leading company that creates focuses on creating new possibilities and foster building great teams. To have the flexibility and opportunities to grow with the chance to create culture for the innovation of the future.

Responsibilities:

• To advertise and close deals on solution services to clients.
• To provide excellent customer service by providing easily accessible information.
• Actively pursue new business opportunities and cultivate positive relationships with current clients.
• Demonstrate the capability to succeed in a sales setting and meet the company's sales goals.

Requirements:

• Min diploma in Mechanical, Electrical, Electonics Engineering or its' equivalent
• At least one-year related sales experience
• Good communication and interpersonal skills

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Brief Description:
Implementation, handling and troubling network-related matters

Scope of Work:

• Perform network administration
• Maintains network performance by performing network monitoring and analysis and performance tuning; troubleshooting network problems;

escalating problems to vendor

• Administer and manage switches, routers, firewall and anti-virus systems
• Responsible for testing, commissioning, configuration, maintenance and operation of new network equipment
• Assist with VPN configurations and wireless troubleshooting
• Create and maintain documentation related to network configuration, policies, procedures and service records
• Participate and provide technical support in network implementation projects whenever required
• Provide standby remote support during weekends and after working hours for any production network related incidents
• Reporting network tasks and projects status to key stakeholders

Qualifications and Experience:

• Relevant network certifications, Prefer to have Cisco CCNA certification
• Minimum 3 years of IT experience in network management is preferred
• Good knowledge of Rack & Stack, Firewall, Routers, Switches, VPN and LAN/WAN technologies such as TCP/IP networking
• Strong experience with network & IT security
• Able to work independently and is a good team player
• Strong communication skills and interpersonal skills
• Possess good technical problem-solving and troubleshooting skills

Contract Type: 12 months

Salary: SGD4,000 to SGD5,500

Location: Punggol / East Coast / Jurong

Working Hours: Rotational shift
- i. Mon – Fri 8:30am to 4:30pm (onsite), Sat 9:00am to 1:00pm. (onsite)
- ii. Mon – Fri 10:00am to 7:00pm (onsite), Sat 9:00am to 1:00pm. (onsite)

Commencement: Immediate

Job Types: Full-time, Contract

Contract length: 12 months

Salary: $4,000.00 - $5,000.00 per month

Schedule:

• Monday to Friday
• Weekend availability

Experience:

• Network engineering: 1 year (Required)

Work Location: One location

Job Type: Contract

Contract length: 12 months

Salary: $4,000.00 - $5,200.00 per month

Experience:

• Network engineering: 3 years (Preferred)

Work Location: In person

Responsibilities:

• Prepare timely and accurate progress reports for ongoing projects, highlighting key milestones, achievements, and challenges.
• Assist in the preparation of comprehensive work done reports, detailing the completed tasks, materials used, and any deviations from the initial plan.
• Support the engineering team in maintaining internal quality management documents, ensuring that project processes adhere to standards.
• Update and maintain monthly reports, including project status, and resource allocation, to provide a clear overview of project performance.
• Undertake any ad-hoc duties as assigned, contributing to the overall success of the engineering department.

Requirements:

• Minimum of a Bachelor's degree in Civil Engineering or a related field. Candidate that does not fulfill this minimum requirement but with relevant experience would be considered.
• Meticulous and detail-oriented, with the ability to spot errors and discrepancies in reports and documents.
• Strong analytical capabilities to interpret project data, identify trends, and make informed recommendations.
• Excellent organizational skills to manage multiple reports and tasks efficiently.
• Effective communication skills to collaborate with cross-functional teams, contractors, and clients.
• Familiarity with engineering software and tools, including MS Office suite, AutoCAD, or project management software.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

JOB RESPONSIBILITIES:

• Plan, lead, coordinate and execute product development activities in blood management products, such blood bag products.
• Pursue set & defined goals & targets.
• Identify scope, application, projected market potential and price target.
• Define project approach & strategy.
• Identify critical success factors as benchmarks & constrains to overcome.
• Project budgeting & control.
• Manage and co-ordinate design projects with various departments, customers and supplier.
• Managing project schedule & timeline.
• Perform biological assessment to support material changes.
• Provide regular update to management on progress of projects.
• Preparation of Biological Evaluation Plan (BEP) and Biological Evaluation Report (BER).
• Design, review and implement biocompatibility evaluations including biological testing, chemical characterization and Biological Risk Assessments (BRA) to comply ISO 10993.
• Biocompatibility sections in regulatory submission (Technical files, Design dossier, Clinical
• Evaluation Report (CERs).
• Maintaining up-to-date product standards compliance, technical file & design history file.
• Establish and carry out design verification test (Type Testing, Biocompatibility, etc).
• Perform designated equipment calibration and maintenance.
• Establish new SOP for test methodology.
• Ad-hoc duties as assigned by Section Head.

WORKING HOURS:

• 5 days work week, Day shifts.
• 8am – 5.30pm (Mon – Fri)

JOB REQUIREMENTS:

• Degree in Biomedical/Material Science or relevant discipline.

Summary of the Job: (Primary function of the job)

· Produce complete control solution and software design base on customer specification and Sys-Mac standardized practice

· PLC based software control design & HMI software design

· Integration of third-party equipment’s and components into software design

Example data communication, barcode scanner, motion control, Robot Controllers, vision system and signal conditional

Job Description:

· Developing and troubleshooting PLC & HMI/ SCADA program

· Developing and integration with MES or Database systems.

· Troubleshooting communications with MES or database.

· Troubleshooting electrical components & system control

· Prepare Machine I/O, flow chart, interface time chart, data allocation list, setup procedure and software code

· Documentation of machine operation manual for the project

· Liaise with the Customer, Design and Project Engineer for the software development and execution of the project

· Execute Engineering Change Notice (ECN) for change of software

· Maintain proper project documentation

· Provide training to End users and technicians.

· Adhere to all health and safety rules and procedures

Job Requirements:

· Min. Bachelor’s degree in Electrical Engineering/ Electronics/ Automation Control or equivalent

· Min. 5 years relevant experience in Automation project

· Experience in PLC programming & SCADA design is a must

· Knowledge of Mitsubishi, Allen-Bradley, SCADA (WinCC, Ignition)

· Knowledge of C++, C#, .NET is an added advantage

· Knowledge of robot programming is an added advantage

· Able to perform assigned task independently or through team activities

· Self- motivated, resourceful and organized

· Willing to travel overseas for assignments at short notice

· Good interpersonal communication skills

Responsibilities:

• Leads, interfaces and provides direction for field engineering for system wide MEICA works which include Odour Control & Air Jumper Facilities and Site Wide Instrumentation Monitoring for DTSS2.
• Site supervision and commissioning of the system wide MEICA works including coordination and interface with the Tunnel and Link Sewer contractor.,
• Ensures the Contractor provides consistent quality of works in accordance with approved drawings and contract specifications.
• Resolves construction and commissioning related issues raised by Client/Contractors.
• Monitors and reports on daily, weekly and monthly work progress and safety records.
• Responsible for the review and approval of Contractor submissions which include, but not limited to reports, RFIs, claims, specification, calculations and drawings.
• Ensure consistent and thorough submittal reviews of the Contractors’ submission have been done throughout the submittal approval process.
• Attendance in meetings, discussions with clients, contractors and to lead in interface, technical and progress discussions; and preparation of meeting notes.
• Monitor Contractor’s progress and schedule and cost performance.
• Assess and check on RTOs’ certification on the value of work completed and recommend progress payments to be made to Contractor.
• Ensures that records of all works including but not limited to tests, inspections, and minutes of site meetings are filed in the DTSS2 Project Information Management System.
• Maintains a high profile in HSES by active participation in HSES audits, inspections and reviews.
• Promotes a near-miss reporting culture and ensure lessons learnt from these near misses are shared across the program.

Qualifications:

• A good Degree in Mechanical Engineering
• Registered with the BCA and accredited with the Joint Accreditation Committee (JAC) of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore is preferred
• About 8 years of relevant experience in Odour/Water/Wastewater Treatment Plant Project and familiar with process mechanical and building services related works.
• Experience in managing and administering engineering work in multiple-contract environment
• Conversant with local building codes, M&E Codes of Practices and regulations
• Good supervisory skills
• Strong letter and report writing ability

• Perform Digital IC Verification and maintain verification environment for module and SOC level using UVM methodology.
• Create and debug test cases and Verification IP and write and review verification plan.
• Carry out assertion-based verification and code coverage analysis on module and SOC level.

Requirements:

• Degree in Electrical/Electronic Engineering
• At least 5 years of digital IC verification experience from design to tape-out
• Good understanding of system Verilog and UVM verification methodology
• Knowledge in connectivity technology and C programming language.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

· Attractive Salary Package

· Flexible WFH Arrangements

About the company

Our client is a leading fintech organisation with a well-established presence across APAC. With rapid expansion plans, they are now looking for a software test / QA engineer to be a part of their team.

About the job

As a Software Test / QA Engineer, your responsibilities involve:

• conducting functional testing, specialized testing, and performance testing to ensure ongoing project progress and maintain quality.

• Conducting requirement analysis, writing test plans, test cases, etc.

• Handling web/app front-end and back-end interface testing tasks, independently building interface automation testing frameworks.

• Tracking and locating defects or issues in the product and communicating with project stakeholders about project progress and issues.

Skills and experience required

As a successful candidate, you should have at least 3 years of experience in software and interface testing across both functional and automation frameworks.

You should have a good understanding of Databases such as Oracle, SQL server coupled with good SQL/Query experience to prepare test data.

You should also have worked with Java or python related programming language on automation testing frameworks.

Whats on Offer

This is an exciting opportunity to be at the forefront of the Fintech Industry as their Software / QA Test Engineer. You will get the opportunity to be part of end to end testing methodologies to be able to push out real world tech product to global consumers.

We are looking for a well-organized site engineer with strong leadership skills to join our growing team. The site engineer's responsibilities include managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. You should be able to work alongside various professionals and create work schedules that meet deadlines.

To be successful as a site engineer, you should demonstrate strong analytical and logical thinking skills. Candidates should display a superb work ethic and thrive under pressure.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.

Completing quality assurance and providing feedback to the team.

Note: English, Mandarin(Chinese) language knowledge compulsory

Responsibilities:

• Regularly visit new and existing clients
• Increase client base through cold calling and industry expansion
• Examine and investigate emerging industries
• Offer clients post-purchase assistance
• Communicate with vendors for project sales
• Conduct a fundamental spray demonstration in the testing facility

Requirements:

• Min Nitec in Mechanical, Chemical, Mechatronic or it’s equivalent
• At least one year related outdoor technical sales experience
• Previous sales experience in fluid control products is an added advantage
• Good interpersonal skills

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Sales Engineer (Energy Solutions / battery product) - Comm / Pandan Road

Working Time: Monday to Friday, 8.30am – 6.09pm
Working Location: Pandan Road (Nearest MRT: Clementi, company provide one way transport)
Salary: $2500 – 3400 + Transport allowance: $1170/mth + Mobile reimbursement: up to $150/mth + commission

Responsibilities:

• Manage existing accounts & source for new customers
• Preparing of sales quotations/tender
• Product and technical consultation to customers
• Meeting customers to discuss sales and technical issues when necessary
• Site presentation of company’s product to client
• Co-ordinate with production department to ensure timely delivery

Requirements

• Possess at least 2 years of sales related experience in industrial sales or battery product related sales experience is preferred.
• Diploma / Degree holders in Electrical/Electronics/Mechanical is preferred.
• Possess own vehicle is an advantage.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

• Co-lead with the Program Manager and manage project from NPI to mass production transfer.
• To ensure NPI project is successfully completed by meeting all specification and requirement.
• Design project plan, execute and completer all tasks within the stipulated time frame and budget.
• Attend tool trial, part evaluation, technical problem analysis and problem solving.
• Liaising internally with project team members and externally with customers on technical matters.

Roles and Responsibilities:

• Emerge in leading project development, change management and implementation of processes linking the business and technical perspectives.
• Collaborate and partner with multi-levels stakeholders across various geographic locations and Regional Head Offices.
• Provide business support & training to application systems.
• Work with business stakeholders and regional counterparts on business processes, performance monitoring, reporting, improvement analysis, solutioning and governance.
• Act as intermediary between business users & technical team to gather requirements, perform analysis, provide documentation, conduct user acceptance test & user training.
• Implementation of system enhancements, new regulations and/or processes.
• Maintain/publish new Global SOP (standard operating procedure) for related business processes and ensure timely distribution.
• Collate, analyze and map system & process workflows.
• Identify issues, gather information from various sources, analyze data, interpret patterns and trends, build models, give recommendations, and create insightful analysis.
• Identify improvement opportunities and recommend process changes, oversee the implementation of revised processes and monitor the efficacy of updated processes.
• Take lead in investigating problems/issues reported by users.

Requirements

• Minimum 2 years' container shipping experience, preferably with experience in Business Process Management.
• Degree/Diploma holders in relevant discipline.
• Knowledge in Business Process Management and Agile practices preferred (not a must)
• Continuously learn and apply new technologies and methodologies to enhance business processes.
• Be open to job rotation opportunities for career growth and to gain experience in various business areas.
• Analyze data and identify areas for improvement in business procesess to ensure high quality and efficient operations

Interested candidate, please sent your resume in MS Word format to andylow@recruitexpress.com.sg

Andy Low Soon Meng (R1104601)

Recruit Express Pte Ltd
EA Licence No: 99C4599

We regret that only shortlisted candidates will be notified.

Our client is a Global MNC, one of the leading players in the Medical Devices sector. Due to business needs, they are now recruiting an IT Support Engineer (Navision System) to be part of their team for ongoing transformation projects. They are located in the East – easily accessible.

Responsibilities Desktop Support Engineer (Navision System):

• Provide support and maintenance for the ERP system.
• Perform programming for e-commerce platforms and participate in website design and development projects.
• Design and develop websites according to specified requirements.
• Troubleshooting and provide training to end user.
• Offer support for implementing new EDI solutions and applications, including developing and maintaining EDI integrations using XML.
• All other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology or other relevant field of studies
• Minimum 2 years of relevant working experience in ERP System Implementation and Maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

EA License No: 19C9682

EA Reg. No. R22108850 (Chan Mun Mun)

• Attend or lead a group of workers to job sites to carry out various activities including but not limited to:

1. RHVAC commissioning

2. Servicing

3. Troubleshooting

4. Installation of equipment/appliances

5. Coordination or Commercial meeting

6. Survey/inspection

• Resource and project planning
• Liaison with clients on project technicalities when required
• Write survey/inspection reports
• Write progress reports and close out reports for every assigned tasks
• Liaison with clients on project technicalities when required
• Assist Sales and Commercial Department on material & labour estimates for quotation purposes

QUALIFICATION

• Graduate of Mechanical Engineering or Refrigeration Engineering (Bachelor’s Degree)
• Minimum 2 year experience in RHVAC field
• Procient in Refrigeration Cycle and RHVAC troubleshooting
• Procient in written and oral English communication skill
• Procient in material take or and labour estimate for a given RHVAC project
• Good understanding on electrical circuit diagram and HVAC Controls (Electrical and PLC)
• Good grasp on technical writing
• Good leadership, coaching and analytical skills
• Able to work independently
• Team player
• Knowledge on Project Schedule Software or Autocad is an advantage
• Train Junior RHVAC Technicians
• Ensure compliance to Safety, Health and Environmental standards

We are located at 11A Tech Park Crescent Singapore 637842 (Tuas South).

Our client, one of Asia-Pacific’s leading organizations is looking for:

Senior DevOps Engineer

Responsibilities:

• Participate in an in-house engineering squad for engineering excellence in design, development and operational of the Cloud Platform
• Work with products team to analyze and enhance products from reliability perspective. Participate in the products development cycle to ensure sustainability and reliability is built right into the products.
• Be the guiding subject matter of expert for Devops methodologies, contribute to Automation, Availability, Scalability and Resiliency
• Focus on ensuring infrastructure as code deployment security with various CI/CD toolchain such as Gitlab, Atlassian, Terraform

Requirements:

• Degree in Computer Science, Business Information Systems, Information Technology, Engineering or equivalent, with 5+ years of experience in building large scalable infrastructure and platform
• Familiar with cloud services such as AWS and Azure; Familiar with Zero Trust Network solutions such as Azure AD Conditional Access and Cloudflare Access
• Familiar with Mobile Device Management solutions such as Intune
• Experience in large-scaled distributed environments and their challenges
• Hands-on experience with Terraform, Gitlab/Atlassian and how to secure the deployment pipelines
• Experience with IAC deployments and it’s best practices; Familiar with IAC security and opensource tools in relevant domain
• Good to have knowledge and experience on GitOps; Good to have knowledge on Node.js, Python or other scripting languages

-------------------------------------------------------------------------------------------------------

Interested applicants can also email CV at [email protected] (for faster processing, please state the exact job / position title applied “DevOps Engineer”)

Only shortlisted candidates will be notified.

-------------------------------------------------------------------------------------------------------

EA License Number: 10C3636
EA Personnel Name: Arora, Hardeep
EA Personnel Registration Number: R1111454

• Project Management & Supervision
• Assist project Manager / Senior Project Engineer on design and site
• Coordination, Testing and Commissiong, Handover Documentation
• ITE, Diploma or Degree in Mechanical, Electrical or equivalent
• 1-2 yrs of working experience in the related field
• Fresh graduates are welcome to apply