Job Responsibilities

• Perform process engineering and design
• Conduct process simulations, and prepare PFDs, UFDs, Heat and Material Balance
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare process equipment datasheets and instrument datasheets

Job Requirements

• Bachelor Degree in Chemical Engineering
• Possess at least 0-3 years of experience
• Knowledge of international codes and standards, software and tools
• Relevant experience as a Process Engineer on Oil & Gas/LNG projects would be an added advantage
• Understanding of process systems, heat and material balance, and P&IDs

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Summary

Process & Mechanical design, design review, RFQ preparation, technical evaluation, site installation supervision and coordination.

Job Description

• Review engineering standards/specifications/drawings, tender, quotations and proposal documents.
• Preliminary and detailed process & mechanical design of chemical plant, incineration plant, food waste plant, water/wastewater plant, offsites & utilities, pollution abatement, etc. including mechanical specification, design calculation, equipment layout design, support design, etc.
• Collaborate with BIM team for 3D model development and ensure the model is according to design.
• Coordination of internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are achieved and exceeded.
• Prepare mechanical equipment requisitions and to ensure that the items procured are in accordance with specifications and schedule to ensure timely delivery.
• Technical review of mechanical equipment/system vendors proposal and submission.
• Coordination with equipment/system vendors on mechanical design and installation work during project execution stage.
• Prepare mechanical technical submissions and work with design lead to liaise with stakeholders, not limited to client/project consultant for submission approval.
• Prepare method statement for all the equipment installation
• Support during construction, installation, start-up, testing and commissioning activities.
• Ensure compliance & perform any other duties as requested by design lead/ engineering management.

Requirement

• Bachelor’s degree in Chemical or Mechanical Engineering or related engineering discipline.
• 3 years and above in process & mechanical design in process plant (such as chemical plant, incineration plant, food waste, water/wastewater plant, offsites & utilities, ACMV, pollution abatement, etc) and hands on experience working in fast paced, diverse and multi-disciplined projects and O&M activities.
• Familiar with process & mechanical design code of practice and standards in Singapore, EN, ASME & PED.
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office software.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Ability to uphold the use of standards and escalate issues in a timely fashion.
• Ability to work independently with minimal oversight.
• Willing to work at Tuas south area

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

Description

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing Diffusion team on the key technology issues that need Technology Development (TD) breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise TD Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.
• Ownership of module business process

Requirements

• PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are welcomed to apply.
• Minimum 4 years of relevant experience in Diffusion process development.
• A deep understanding of flow dynamics , thermodynamics, physical phenomena and their direct application to Diffusion deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2 - 4 months at a stretch to work on technology development.

Job Description

• Perform process design for chemical plants, storage terminals, industrial waste facilities in basic design, FEED and detailed engineering stage.
• Responsible for developing process engineering deliverables including PFD, P&ID, calculation reports, heat and mass balance, system descriptions, line list, simulation model, utility consumption list, process control philosophy, etc in accordance with project requirement and applicable codes/standard.
• To carry out process calculations such as hydraulic calculation, surge analysis, heat transfer calculation, pressure relief and blowdown analysis, utility consumption calculation, equipment sizing, etc.
• Develop firefighting design philosophy, fire water/foam demand calculation and fire water/foam network hydraulic simulation as per local regulation and international code/standard.
• Develop design basis and UFD for utility supply system and wastewater handling system.
• To participate in design review, Process Hazard Analysis, SIL Studies, 3D Modeling review and prepare close-out reports when required.
• Work closely and co-ordinate with other engineering disciplines for preparation of process deliverables and provide process parameter input as required.
• Provide regular update to Lead Process Engineer, Process Manager and Engineering manager on process related technical and engineering issues.

Requirements:

• Bachelor’s Degree in Chemical,Process Engineering or equivalent
• Team player with strong analytical and communication skills
• Minimum 3 years of experience in oil & gas/petrochemical/water treatment /chemical plants
• Fresh Graduates are also welcome to apply

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

OTSAW Digital is seeking creative, energetic well-rounded Product Development Engineer to work in the field of autonomous robot technology.

You will be responsible for integrating and testing software solutions in simulation and on the robot. We are looking for engineers who are interested in tackling challenging problems for our robots.

At OTSAW Digital, we want people with passion. We want innovators. We want people who can collaborate and bring us a creative future.

So, if you are passionate about working in a startup, want to solve hard problems and make cool robots with us, please apply.

Responsibilities:

• Participate in new product development from concept to launch.
• Manage and co-ordinate with various departments, to develop product fulfilling to product design specification, keeping schedule, cost and quality.
• Identify and resolve all issues effectively to achieve all objectives.
• Acquire product design specification approval from stakeholders before product development.
• Translating customer’s needs and pain points into product design specifications.
• Establish and carry out test procedures for products to meet to product design specification.
• Establish assembly drawing to the manufacturing team for production purposes.
• Ensure proper documentation (including manuals) of all required information for product.
• Support product installations and any necessary diagnoses, troubleshooting, service, and repair.
• Provide product training and support internally.

Requirements:

• 2-3 years working experience in relevant fields.
• Min. education qualification: Bachelor Degree in Robotics System, Computer Engineering, Electrical Engineering.
• Strong foundation in Electrical, Mechanical and Software System.
• Demonstrate deep interest & understanding in robotics field.
• Experience in developing on actual physical robot is a plus.
• Experience in any of the following C++, Python, ROS, JS, Git, Autodesk Eagle, Autodesk Inventor is a plus.

Join Fortinet, a cybersecurity pioneer with over two decades of excellence, as we continue to shape the future of cybersecurity and redefine the intersection of networking and security. At Fortinet, our mission is to safeguard people, devices, and data everywhere.

We are currently seeking a dynamic Senior Software Development Engineer to contribute to the success of our rapidly growing business.

We are looking for a software engineer in the Vulnerability management team to accelerate one of Fortinet-Lacework’s core security application roadmaps.

The ideal candidate is a software engineer who is passionate about cloud security, systems engineering, big data, and directly addressing customer-facing issues. This team focuses on delivering products while solving engineering challenges at scale. Given the fast-moving nature of this space, candidates should have a learner’s mindset and a curiosity for cloud infrastructure and the surrounding challenges with securing it.

As a Senior Software Development Engineer, you will:

• Develop an in-depth understanding of the Fortinet-Lacework platform and customer value proposition.
• Drive projects/technical initiatives related to providing risk insights based on data correlation.
• Influence and define delivery timelines in alignment with our field and product teams while balancing speed, accuracy and precision.
• Build instrumentation, observability, and analytics into the services to support data-driven decisioning and incident response.
• Work with leadership to track key performance, cost, and efficiency metrics as service level objectives (SLOs).
• Work cross-functionally with other Engineering, Product Management, Support, Sales teams as well as Customers.
• Demonstrate good communication skills and present work to company leadership and at company-wide events.
• Actively participate in recruiting and mentor new members of the team.
• Strive to use readily available, general and scalable methodologies and tools; stay current with latest tools and techniques.

We Are Looking For:

An insightful and influential collaborator to join our team. We encourage you to apply for this position if you have the following qualities:

• Degree in quantitative field (e.g. Computer Science, Engineering, Mathematics, Statistics, Operations Research or other related field).
• 5+ years of experience with SaaS development and deployment using modern cloud platforms.
• Strong experience developing data-intensive applications.
• Hands-on design and development of Go and/or Java-based microservices.
• Exposure to modern software delivery release models and associated tooling (CI/CD, monitoring, observability).
• Ability to deal with ambiguity, driving design and implementation to conclusion with limited supervision.
• Advanced degree (Master’s or PhD or equivalent experience) in quantitative field.
• Familiarity with cloud-based data warehouses (Snowflake, Redshift, etc.).
• Experience handling large scale of data including processing, querying and optimizing for performance, cost and efficiency.
• Experience working in Cloud Security or Infrastructure Security.
• Cloud certifications or other demonstrable cloud domain knowledge.

Why Join Us:

At Fortinet, we embrace diversity and inclusivity. We encourage applications from diverse backgrounds and identities. Explore our welcoming work environment designed for a rewarding career journey with an attractive Total Rewards package to support you with your overall health and financial well-being. Join us in bringing solutions that make a meaningful and lasting impact to our 660,000+ customers around the globe.

Job Description

The Applications Development Engineer role is within the product division that designs and manufactures inspection and review equipment for the semiconductor manufacturing industry. Based in Singapore, the Applications Engineer will be responsible for product penetration/adoption and process optimization at customer facilities in fabs.

This includes gaining expertise on KLA equipment and customers’ semiconductor fabrication processes and applying them to solve critically important production problems.

The role also includes training customers and other applications engineers, handling/driving local applications issue processes, investigating customer technical needs/problems and providing solutions, conducting final acceptance, demonstrating products, and understanding competitive situations, methodology, and performance group analysis.

Characterization of new systems and features includes crafting and conducting experiments, collecting data, and publishing results and recommendations in the form of application notes, best-known methods, or

characterization studies.

Minimum Qualifications

• Minimum Bachelor's Level Degree in Engineering and related work experience of 8 years.
• Work experience in semiconductor processing or the equipment industry is preferred.
• This role requires up to 70% travel on short notice, including extensive international travel and working with other global cultures.
• Teamwork is critical, so having a good balance between technical skills and people skills is important.

Responsibilities

• Process module ownership involving Bonding process characterization and advanced process development for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer Bonding processes to high volume manufacturing (Fab10N), and work on continuous improvements to manufacturability.
• Address process issues working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving the process margins required for meeting the mature yield goal for 3D NAND parts.
• Advanced 3D NAND Bonding process development will include performing fundamental research, consumables development, and hardware evaluation, as well as testing processes for novel applications.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions.
• Identify process simplification opportunities and drive cross functional teams in implementation.
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures, and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• PhD in Materials Science, Chemical Engineering or Physics with minimum 5 years hands-on experience in leading edge bonding equipment and hybrid bonding process development experience.
• Familiarity with Bonding equipment operation, optical metrology and profilometry
• In-depth understanding of Bonding process mechanisms
• Understanding of various integration and structural impacts and constraints related to bonding process.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects.
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously.
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.
• Suitable candidates may be considered for Expat posting to Singapore from overseas locations.

This is an exciting and fast-paced position! Our team Application Development & Support(ADS) delivers software solutions to leadership and engineers throughout Micron's global manufacturing network. As Operations Central Team (OCT) Software Development Engineer at Micron Technology, Inc., we have the chance to create and improve Micron systems and processes on a global scale.

We will collaborate with customers across departments and geographical sites to design, develop, innovate and support software throughout the development life cycle. Be part of the team to support efficient business processes by maintaining a focus on global alignment, and participating in efforts to research and influence technology roadmaps.

Responsibilities include, but not limited to:

• Demonstrate Micron core values People, Innovation, Tenacity, Collaboration, and Customer Focus
• Collecting requirements from customer requests
• Designing, developing, debugging, documenting, testing, and deploying applications
• Collaborating with other developers on the team
• Working closely with Business Operation Teams, Product and Application Development teams, and other internal customers during application development and deployment
• Training users on the use and maintenance of new applications

Project Description

• Join an agile team as one of the developers to develop a web solution for Micron globally including, but not limited to, API, ETL, and database
• Can be a new or existing running projects

Learning Outcomes

• Gain hands-on development experience in modern tools and pioneering tech stacks (Angular, OpenShift, Azure)
• Learn to work effectively in the IT agile development team to develop successful product with timely delivery
• Gain domain knowledge on semiconductor industry
• Learn problem-solving and analytical skills and good software engineering practices
• Develop communications, interpersonal, and other critical skills in the professional environments

Pre-requisites

• Proficient in Angular, .NET Core, C#, and SQL
• Knowledge of containerized deployment with Docker, Kubernetes, and OpenShift a plus.

Traits

• Strong analytical, problem solving, and interpersonal skills
• Motivated to work in dynamic and fast-paced environment
• Ambitious and driven to complete tasks independently while recognizing ways to improve processes
• Active team participation, partnership, and consensus-building skills
• Good verbal and written communication skills

Responsibilities

• Implements full software development process
• Collaborates multi-functionally with business users, project managers and other engineers to achieve elegant solutions.
• Develops high quality and innovative software design and solutions.
• Provides ongoing documentation, maintenance, support and improvements in existing systems and platforms.
• Provides 24x7 Support

Education Required

Bachelors Degree or equivalent experience in Computer Science or related field of study

Experience Required

3 years experience in 3 or more of the following:

• Experience in front-end web development (preferably Angular, ASP.NET)
• Proficiency in C# and Object Oriented Programming
• Proficiency in HTML, CSS, JavaScript
• Experience in RESTful Web API development (preferably ASP.NET Core, Node.js)
• Experience with Agile development methodologies
• Good understanding of one or more database technologies (MSSQL, ORACLE, Snowflake, MongoDB, CouchDB)
• Experience in SSIS, SSRS, Tableau, PowerBI or any Business Intelligence technologies Bonus if you have experience in Python and cloud programming, CICD (Azure), NiFi
• Knowledge of source code repositories (Git)
• Knowledge of SQA is a bonus

Working Location

1, North Coast Drive, Singpaore 757432

Job Summary

The Test Development Engineer will design, develop an automated test system and test programs for test automation. This will involve designing electronic circuits, writing test software, and integrating test hardware to attain full test automation. This person will commission the test system and integrate it into the machine handling automation system.

Duties and Responsibilities

1. Design, develop, and implement test application systems to support the test automation designs.
2. Develop TEST software, TEST system, and TEST Probing system.
3. A hands-on approach to system integration and hardware configuration.
4. Install and commission test programs and systems.
5. Conduct training and provide test system documentation.
6. Meet the departmental cost, schedule, quality, and engineering objectives.
7. Keep track of product performance, improvement, and cost reductions.

Job Qualifications:

• Min Bachelor’s Degree in Electrical and Electronic Engineering.
• Minimum 2 to 3 years’ experience in the field of test engineering.
• Proficient in LabView or C# programming skills or both.
• Good knowledge of Electronics Circuit.
• A good understanding of test instrumentation is required.
• Laser and optical testing knowledge is an added advantage.

Your main responsibilities include:

• Develop and maintain product datasheet testing and characterization test programs for NAND and NOR components
• Working with product reliability engineers to define test flows for individual products
• Provide support to operation team to ensure seamless execution for generated test flow on the tester with live product
• Perform electrical failure analysis for failure validation and characterization

You are encouraged to apply if you can demonstrate some of the qualities listed below:

• Master's or Bachelor's degree in Engineering field. Microelectronic/Electrical/Computer Engineering fields are preferred.
• Positive attitude and self-motivation towards learning and development.
• Good analytical mindset and structured personality.
• Good written and verbal communication skills.
• Hands on experience with C++/Python and Object-Oriented Programming is a plus
• Understanding Automated Test Equipment and flash memory is a plus.
• Fresh graduates are welcome to apply.

Working location:

• 990 Bendemeer Road, Singapore 339942

Job duties and responsibilities:

• Design new products and continually improve existing products to meet industry standards and customer requirements.
• Develop technical manuals and Instruction Operating Manuals for products, ensuring accuracy and usability.
• Prepare, review, and verify design drawings, detailed specifications, and fabricated drawings for compliance with technical standards.
• Create Bills of Materials (BOMs) and ensure accurate documentation.
• Order materials and supplies; monitor the progress of fabrication and installation to ensure alignment with design specifications and schedules.
• Perform quality control checks to ensure the integrity of materials, components, and final products.
• Update and maintain design records, project databases, and documentation for traceability and reference.
• Track and coordinate the delivery of goods and materials to meet project timelines.
• Collaborate with cross-functional teams, including procurement, production, and project management, to address technical challenges.
• Provide technical support and guidance to the fabrication and installation teams during project execution.
• Identify opportunities for cost optimization, design innovation, and process improvement.

Job Requirements:

• Degree or Diploma in Mechanical, Precision, Tool, and Die Engineering, or a related field.
• At least 2 years of experience as a Design Engineer.
• Proficiency in drafting software such as AutoCAD, SolidWorks, 3D modeling software, or equivalent.
• Experience in Marine Hydraulic Applications, with knowledge of valves and actuators, as well as gear design (e.g., spur gear, planetary gear, bevel gear).
• Understanding of forging, casting, and precision CNC machining processes.

Roles & Responsibilities:

· Responsible for analysing wastewater samples using various analytical lab methods

· Perform lab equipment maintenance, troubleshooting, and calibration

· Develop methods for wastewater treatment according to customer’s requirements

· Develop test plans, drive testing execution, analyze, document results, and report to respective PIC.

· Lead and guide technician(s) priority, workload, technical understanding

· Learn critical market drivers/needs and understand product applications

· Manage projects or sub-projects including timelines and budgets and work in an interdisciplinary team

· Consolidate and analyse data for process quality control and reporting purposes, ensure compliance with relevant standards and regulatory requirements.

· Facilitate laboratory equipment, accessories, and consumable purchase and inventory management

· Developing and maintaining an effective laboratory workforce by constantly improving work methods

Qualifications/Experiences required:

· Degree in Chemistry, environmental, chemical engineering-related engineering fields.

· Able to communicate with various levels of people.

· Pleasant personality; mature, independent, and resourceful.

· Analytical with good writing, communication, and problem-solving skills

· Self-motivated, team-oriented, and flexible individual must possess the initiative and ability to take on numerous challenging tasks, and new projects, and meet high standards and deadlines.

As a Product Development Engineer, the Non-Volatile Engineering (NVE) Product Engineering organization at Micron Technology, Inc., you will be part of a brilliant team of engineers that solves complex problems. You will be responsible for enabling Micron’s NAND products with seamless and issue free release to both internal and external non-volatile system customers.

Key Responsibilities :

• Design novel test algorithms and develop test programs for validating NAND features and commands
• Study the latest RG NAND designs, with focus on customer mode operations
• Use high-speed tester hardware to perform functional and design validation of new NAND devices
• Perform Electrical Failure Analysis during the evaluations, and investigate root causes of reported device issues
• Make use of Verilog/Synopsis VCS for simulation study and analysis
• Involvement in high-speed fail debug
• Collaborate with NAND Design, Application Engineering, Product and System teams to drive closure of device issues
• Develop and optimize deterministic usage case flow and Random Sequence Generator for validation purpose
• Automation of program development and work processes using scripting

Requirements:

• Degree in Electrical and Electronics Engineering / Computer Engineering with 1-3 years’ relevant experience in NAND related product and/or test program development
• Software development proficiency (e.g. C-based programming) and scripting (e.g. Perl, Python)
• Simulation software know-how (e.g. Verilog, Synopsis VCS)
• Excellent problem solving and analytical skills
• Good multitasking and organizational skills
• Strong presentation skills Self-motivation and enthusiasm
• Effective communication skills in written and spoken English

We are seeking a talented and motivated Software Development Engineer to join our dynamic team. You will be responsible for designing, developing, and maintaining software solutions that drive our business forward.

Responsibilities:

• Design, develop, and implement software solutions using various programming languages and technologies.
• Collaborate with cross-functional teams to understand business requirements and translate them into technical solutions.
• Write clean, efficient, and well-documented code.
• Troubleshoot and debug software issues.
• Perform unit and integration testing to ensure code quality.
• Stay up-to-date with the latest technologies and industry trends.
• Contribute to the overall improvement of our software development processes.

Requirements:

• Bachelor's degree in Computer Science, Engineering, or a related field.
• Strong communication and teamwork skills.
• Minimum 3 year Experience.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructure, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking an experienced and highly motivated Embedded Engineer to join our dynamic engineering team. The ideal candidate will be responsible for designing, developing, testing, and maintaining embedded systems for a variety of applications. You will work closely with hardware and software teams to integrate solutions that meet our customer’s needs while ensuring high quality, reliability, and performance.

Job Description

• Design and develop embedded systems and applications based on customer requirements and project specifications.
• Write efficient, optimized code for embedded systems in languages such as C/C++ or assembly.
• Develop, implement, and test embedded software on various platforms (e.g., ARM, or microcontrollers).
• Debug and troubleshoot embedded systems using tools like oscilloscopes, logic analyzers, and in-circuit debuggers.
• Conduct system performance analysis and implement software optimizations to meet power, speed, and resource constraints.
• Create unit tests and integrate automated testing into development processes.
• Document and maintain clear code, designs, and specifications for embedded systems.
• Collaborate with cross-functional teams, including hardware engineers, software developers, and QA engineers, to deliver high-quality embedded products.
• Participate in code reviews, maintain version control using Git, and follow industry best practices for embedded development.
• Stay up to date with emerging embedded technologies and continuously improve the design and development process.

Requirements

• Experience in firmware development on embedded systems using C/C++ and/or assembly
• Knowledge and/or experience in embedded system such as Arm-Linux
• Knowledge and/or experience in porting codes (especially assembly language) from Intel-Linux to Arm-Linux
• Knowledge in information security or networking standards is an added advantage.
• Knowledge in secure boot for NXP i.MX solution is an added advantage.
• Strong problem-solving skills and ability to work independently as well as teams.
• Excellent communication and collaboration skills.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

• Migrate jobs from old scheduler JP1 to IBM Workload Automation

• Troubleshoot new and existing issues in current environment

• Test and implement new IWA features applicable to the current environment

• Develop new jobs for supported systems by demand

• Collaborate with system owners to clarify and cater business demands through automation

• Perform SIT and UAT before implementing to PROD

• Create release notes and runbook for PROD deployment and BAU support

• Execute basic MS SQL queries related to product troubleshooting

• Ensure correct AD user details for smooth job execution

• Run connectivity tests between IWA and remote servers

• Confirm folder and file permissions in remote servers for flawless job execution

• Work with IBM support for maximum product utilization

• Team up with other software SME to create a faultless system.

• Develop and deploy scripts and jobs to control scheduled activities, ETL and business processes

• Create API-based processes as the need arise

• Monitor job failures in Control-M and SkyBot, provide RCA, and resolve if possible

• Create incidents for job failures and technical issues, then assign it to the appropriate workgroup

• Respond to workload automation requests submitted by the stakeholders through ServiceNow

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Identify, propose and evaluate new business opportunities for business growth, with respect to the sale/purchase of refining products including procurement of intermediate components for value-added feedstock/blending entities, and third-party service collaboration.
• Coordinate with internal and external stakeholders to establish operating, commercial and accounting procedures for managing third-party contracts and agreements.
• Oversee day-to-day refinery performance and ensure stakeholders adherence to contractual quantity and obligations. Liaise and collaborate with stakeholders to resolve issues and concerns.
• Work closely with internal stakeholders to support the needs of refinery feedstock demand and supply of products, to achieve optimal refinery operation.

• Degree in Chemical Engineering

• At least 2 years' relevant experience in oil refinery/petrochemical.
• Experience in process/development engineering or commercial work knowledge will be advantageous

The Lead Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role involves managing a team of engineers, collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability

To lead the process engineers,

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management

Qualifications/Experiences required:

• Degree in Environmental, Chemical Engineering, or related engineering fields.
• Min. 5 years and above in process & mechanical design in wastewater treatment plants, hands-on experience working in fast-paced, diverse, and multi-disciplined projects and O&M activities will be an advantage.
• Able to communicate with various levels of people.
• Self-motivated, team-oriented, and flexible individual must possess the initiative and ability to take on numerous challenging tasks, and new projects, and meet high standards and deadlines

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 3 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.