• Perform qualification validation of medical device sterilization related equipment and processes
• Perform the release of sterilization batches in accordance to relevant ISO standards
• Ensure the compliance of equipment in accordance to Calibration and Preventive Maintenance requirements.
• Perform complaint handling, investigate root cause of complaint, and perform Corrective Action and Preventive Action as necessary.
• Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.
• Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures
• Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing
• Participate in external and internal audit to ensure company quality system is effective
• Participate in continuous improvement programs such as 6S program, yield improvement projects etc.
• Support new production introduction as a team member representing quality
• Perform other tasks as assigned by the supervisor

Education

• Bachelors Degree in Engineering, Science (e.g. Microbiology) or equivalent

Experience

• Work experience as a sterilization engineer in a medical device manufacturing environment
• Experience with qualification validation of equipment and processes for sterilization of medical device
• Working knowledge of ISO11135 EtO Sterilization for Medical Devices and/or any other relevant standards such as ISO11137 Gamma Sterilization
• ISO13485 Internal auditor

Skills

• Statistical Analysis (Hypothesis Testing, ANOVA, Gage R&R, DOE etc)
• Root cause analysis (Kepner-Tregoe, 5-Why, 6M etc)
• Problem solving techniques (e.g. DMAIC/8D/PDCA/A3 application in continuous improvement)
• Competent with general PC and Office software application

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize adaptive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for CAM and non-contact measurement related repair processes.
• Lead and own CAM and non-contact measurement activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on digital manufacturing and conventional machining
• Experience in operating non-contact measurement equipment and Siemens NX multi-axis manufacturing module
• Understanding of common component repair processes (welding, heat treatment, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

Authorities and Responsibilities

1. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives.
2. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
3. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with customers, production and suppliers to meet the quality requirements.
7. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
8. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
9. Manage the implementation / schedule of calibration control.
10. Participate in the implementation of risk assessment and risk control of medical devices

Competence Requirement

• Preferred to have NTC / Diploma / Degree in Precision / Mechanical Engineering or related discipline.
• Fresh degree may be considered while other educational qualification is required with preferred 3 - 8 years of relevant working experience in related Engineering industry.
• Possess good analytical, verbal, written and interpersonal skills.

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Key Responsibilities

1. Develop new procedures and Best Known Methods (BKMs) to service new products. Contribute to the FMECA process.
2. Participate in or own first chamber Build & Test in Apps lab. Solve issues, or work with Engineering to address issues identified. Work with Manufacturing to develop procedures and participate (if required) on New Product final test
3. Partner with Quality & Reliability (Q&R) group to review and address Top Field Issues. Participate in or own CAPA process. Conduct or facilitate Failure Analysis (FA) if needed
4. Develop and document procedures to install (start-up), retrofit and maintain the product (Technical Product Manuals)
5. Develop new procedures, Customer Engineering Notices (CENs), Internal Service Bulletins (ISBs) and troubleshooting guides as required
6. Collect process and qualification data to create product Best Known Methods (BKMs)
7. Develop initial training package for new products and work with Global Technical Training (GTT) to develop training class. Train Customer Engineers (CEs), Process Engineers (PSEs) and Technical Product Support (TPS) assigned to customers who will receive ELS Shipments, prior to shipping
8. Identify new parts that require to be stocked by AGS and work with them to ensure parts are stocked in correct locations

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job responsibilities:

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet targets.

• Coordinate internal resources and third parties/vendors e.g. Consultants and Sub- Contractors/Suppliers for the flawless execution of all projects.

• Ensure that all projects are delivered on-time, within scope and within budget.

• Ensure that work are executed in accordance with approved plans/drawings, contract specifications and regulatory requirements.

• Ensure resource availability and allocation.

• Develop detailed project plan to monitor and track progress.

• Manage changes to projects’ scope, schedule and costs using appropriate verification techniques.

• Perform risk management to minimize project risks.

• Measure project performance using appropriate tools and techniques.

• Create and maintain comprehensive project documentation.

• Responsible for the overall project management, planning & control, and execution, including project budget evaluation and profitability.

entify and comply with all applicable statutory/regulatory requirements related to the project.

Lead a team of professional and technical staff in planning and execution of day-to-day operations to achieve all key project target.

Respond swiftly to work delays, emergencies, and other problems.

• Report and escalate to Management as needed.

• Any other duties that may be assigned.

Requirements:

• Proven at least 3 years of working experience in project management in the public and private residential, government and commercial building projects.

• Solid technical knowledge related to structural, architectural (finishing) or M&E works.

• Solid organizational skills including attention to detail and multi-tasking skills.

• Excellent written and verbal communication skills.

• Excellent team player with ability to meet tight deadlines.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job responsibilities:

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet targets.

• Coordinate internal resources and third parties/vendors e.g. Consultants and Sub- Contractors/Suppliers for the flawless execution of all projects.

• Ensure that all projects are delivered on-time, within scope and within budget.

• Ensure that work are executed in accordance with approved plans/drawings, contract specifications and regulatory requirements.

• Ensure resource availability and allocation.

• Develop detailed project plan to monitor and track progress.

• Manage changes to projects’ scope, schedule and costs using appropriate verification techniques.

• Perform risk management to minimize project risks.

• Measure project performance using appropriate tools and techniques.

• Create and maintain comprehensive project documentation.

• Responsible for the overall project management, planning & control, and execution, including project budget evaluation and profitability.

entify and comply with all applicable statutory/regulatory requirements related to the project.

Lead a team of professional and technical staff in planning and execution of day-to-day operations to achieve all key project target.

Respond swiftly to work delays, emergencies, and other problems.

• Report and escalate to Management as needed.

• Any other duties that may be assigned.

Requirements:

• Proven at least 3 years of working experience in project management in the public and private residential, government and commercial building projects.

• Solid technical knowledge related to structural, architectural (finishing) or M&E works.

• Solid organizational skills including attention to detail and multi-tasking skills.

• Excellent written and verbal communication skills.

• Excellent team player with ability to meet tight deadlines.

Job Description

Key Responsibilities

1. Manage customer expectation and issues with software releases providing a prioritized list of requests to business unit per platform. Independently learn and investigate customer's high value problem (HVP), systematic bug or systematic software failures.
2. Troubleshoots a variety of difficult software problems and interface with engineering teams to improve product quality.
3. Interfaces with external customers for requirements analysis and schedule.
4. Manage software proliferation at customer sites. Deliver software implementations and manage customer to achieve project objectives.
5. Performs customer specific software testing and analysis on bugs and enhancements.
6. Track software performance and quality at external customer sites.
7. Provide on-going training to customers and customer engineers (CE) for technical products and systems issues. Deliver updates and reports to managers, partners and peers.
8. Assist in training junior level engineers in departmental procedures, corporate procedures, and detailed product operation. Lead work groups and troubleshooting forums.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

(Customer Interface is essence to fulfilling of functions )

• Manage and maintain existing customer accounts
• Ensure Sales Orders are fulfilled for On Time Delivery
• Work closely with various departments to drive order fulfillment towards customer satisfaction
• Manage risks/issues that might/do arise over the course of program life cycle & take measures to correct them before they occur.
• Participate in Chang Control Board (FA/PILOT/Production ECO) & NPI-Meetings
• Monitor and manage Ageing Stock inventories
  
  The Requirements:
• At least a Diploma / Degree in Engineering field.
• 2 to 5 years’ relevant experience as a Program Engineer preferably serving customers from seimconductor, medical/life science or analytical industry
• Proficient with computers and in using MS word, Excel, Power point.
• Work experience in SAP / Oracle /SUGAR CRM network preferred.
• Possess analytical and problem- solving skills, excellent oral and written communications skills for effective communication.
• Ability to multi-task in a dynamic and fast paced environment.
• Meticulous with strong project management experience.
• Customer and sales service-oriented team player to maintain and improve quality of service.

Other information:

• Working Hours : 8.15am to 5.30pm (Mon-Fri)
• Location : Changi North
• Company Bus : Pick up at Ang Mo Kio, Yishun, Hougang, Punggol, Pasir Ris, Bedok, Tampines MRT/Interchanges

Interested candidates are invited to apply online with an updated resume. Please indicate the below information in your resume:

• Education Background
• Work experience
• Current & Expected salary
• Reason(s) for leaving current/previous job
• Availability / Notice Period

We regret that only shortlisted candidates will be notified.

Thank you for applying!

Job Description

At Applied Materials, our innovations make possible the technology shaping the future. We are the leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. As a part of the hardware engineering team, you will be taking a lead in mechanical design, be the point of contact and interface to the wider product development team and work with the customers to solve challenging problems in multiple domains.

Minimum Qualifications:

• Bachelor's degree in Mechanical Engineering, or related engineering field
• 3D CAD experience – Pro-engineer, Solidworks or UG NX
• 3+ years of hands-on experience designing capital equipment

Key Qualifications:

• Semiconductor equipment design or troubleshooting experience
• Fire in the belly – can do attitude
• Proficient in simulation and analysis methods (FEA, thermal analysis and tolerance analysis)
• Strong in one of the following fields: Thermal or Compressible flow or Design or Machining & manufacturing processes
• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information
• Excellent written and verbal communication skills
• Able to craft clear engineering documentation
• Ability to form effective cross-functional relationships and to communicate product design/mechanical requirements clearly to non-experts
• Ability to prioritize and handle multiple projects simultaneously

Description:

You will own the end-to-end design, development and validation of hardware required to enable chemical vapor deposition (CVD) processes. You will work with a passionate cross-functional team to generate design concepts, and as the mechanical engineering lead you will be responsible for engineering analysis and documentation for your piece of the project:

• Identifying design tradeoffs and risks to choose best path to solution
• Identifying and performing experiments, data analysis and applying scientific methods to reduce design risk early
• Running analysis (tolerance, thermal, flow etc.) to prove designs will meet intended objectives

In the prototyping and validation phases, you will support internal and external teams in identifying, troubleshooting and resolving issues found at the component and system level and will be multidisciplinary in nature. Troubleshooting issues as customer site may involve some international travel.

At the end of every project; with your contribution; Applied Materials will be able to deliver technology that will enable our customers to develop devices for all conceivable applications, sensors, memory, logic, IoT and beyond!

Key Responsibilities

• Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.
• Develops and uses procedures. Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.
• Analyze operational data; Develop and implement recommendations. Participates in and may lead audits.
• Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs.
• Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines.

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market.

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements.

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information.

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies.

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus.