What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Minimum with 7 years relevant experience
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

What you will do

• APU Physical Design Implementation for APU partitions focus on MDLA/NDLA n5/n4/n3e/ process
• Physical VerificaTion to deliver clean APU partition gds N5/n4/n3e/ process
• Perform Timing Closure ECO for APU partition including PrimeTime timing check and twk timing ECO

What you bring

• Apr hands on for n5/n4/n3e process using Innovus and Fusion compiler EDA tool
• tcl/csh/perl/bash. programming skill
• Timing Analysis Debugging and Fixing skills
• Experienced N4/N3e process

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Roles & Responsibilities

Primary Function/Primary Goals/Objectives:

· Ensure the execution of the capital project on processes, equipment, plant facilities are compliance with the Safety and GMP policies, procedures, standards, and statutory requirement

· Deliver projects independently on time, on budget and in scope.

· Manage project capital and expense cash flow budgets.

· Manage project cost status-raise Purchase Orders, process invoices on a timely manner

· Provide timely project status review

· Manage key portfolios in Project Management Office such as Capital Planning, Site Master Planning, Shutdown Planning, Drawings Management and Metrics Reporting.

Major Responsibilities:

· Implement plant continuous improvement projects and cost saving efforts.

· Conduct Risks Assessment (RA), develop work Method Statements (MS) and Safety Work Procedure (SWP)

· Manage reward and recognition and employee engagement programs in the organization.

· Manage various improvement programs and workstreams in the plant, track and report benefits of projects.

· Any other duties as assigned by supervisor.

Requirements:

· Bachelor’s degree in civil / Geotechnical Engineering

· At least 10 years relevant experience in tender and project management for civil, marine, infrastructure projects

Responsibilities

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D

Engineer - Analog / RF Design [Radio System Solutions]

Job Description:

• Design of RF/Analog/Mixed-signal IC circuit blocks / IPs based on specifications (performance, area, power consumption).
• Realize IC layout with floor planning and performance considerations (with layout engineers).
• Testing & Debugging of IC prototypes (with system verification engineers).
• Support of IC to mass production ready.
• Continual support / debug of field related issues or customer IC rejects.
• IC design and performance documentation.

Requirement

• Bachelor's Degree / Master’s Degree in EEE (major in IC Design).
• Knowledge of RF/analog designs through final year project and internship are an added advantage.
• Training will be provided.

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the team

Radio System Solutions Division develops standalone RF-IC or IPs for wireless communication products within MediaTek. This involves designing and verification of building blocks such as low-noise amplifiers, power amplifiers, filters, data-converters, phase-locked loops, low-dropout regulators and digital calibration circuits in advanced semiconductor processes. We are looking for a passionate talent who always up for challenges to join us for this exciting career journey!

In MediaTek, we believe technology changes lives and a changed life can change the world.

Joint us - Tomorrow built by you.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

1. JOB DESCRIPTION
Job TitleSolar Site EngineerOccupationENGINEERJob Description & Requirements
We are seeking dedicated and enthusiastic local Singapore graduates with ITE & Diploma certifications to join our team as Solar Site Engineer. The ideal candidate should be willing to work under harsh conditions at project sites and possess a strong interest in renewable energy, particularly solar power systems.Responsibilities:1. Site Assessment and Preparation· Assist in the evaluation and preparation of project sites for solar installations.· Conduct site surveys and collect data necessary for the design and installation of solar systems.· Coordinate with the Project Manager to ensure all site conditions and requirements are met.2. Installation and Commissioning:· Support the installation, commissioning, and testing of solar photovoltaic (PV) systems.· Work with PM to ensure installations comply with design specifications and safety standards.· Troubleshoot and resolve issues that arise during installation3. Maintenance and Support:· Perform regular maintenance checks on installed solar systems to ensure optimal performance.· Assist in diagnosing and repairing any faults or issues with the solar equipment.· Maintain accurate records of site activities, including installation progress, maintenance schedules, and any issues encountered.· Prepare and submit reports to senior engineers and project managers4. Collaboration and Communication :· Work closely with other team members, including electricians, technicians, and project managers.· Communicate effectively with clients, contractors, and other stakeholders.Criteria:· ITE or Diploma in Electrical Engineering, Mechanical Engineering, Renewable Energy, or related fields.· Basic understanding of solar PV systems and renewable energy principles.· Willingness to work outdoors and under harsh conditions.· Strong problem-solving skills and attention to detail.· Ability to work independently and as part of a team.· Good communication skills and a proactive attitude.· Physically fit and able to handle the demands of on-site work.Preferred Skills:· Experience with solar PV system installation or maintenance (internships or academic projects are acceptable).· Familiarity with electrical drawings· Basic knowledge of electrical safety standards and practices.· Proficiency in using relevant software and tools for site assessment and installation.Working Conditions:· Primarily outdoor work at various project sites.· Exposure to varying weather conditions and potentially challenging environments.· Occasional weekend or evening work may be required to meet project deadlines.

Job Description:

• Operation and Maintenance of Electrical systems
• Continuous performance monitoring and ensuring highest uptime
• Project coordination for new equipment installations
• Troubleshooting of system abnormalities and provide technical solution
• Initiate continuous improvement projects
• Manage external contractor and vendors and maintaining safety standards

Job Requirement

• Degree in Electrical Engineering or related fields with min 3 years' experience
• Experience in operation and maintenance of Transformers, LV, MV switch boards, UPS, Motors, Frequency convertors and power distribution.
• Experience in project installation of electrical distribution
• Able to study protection circuits, single line drawings and control circuits.
• Knowledge of low voltage systems like Fire protection, CCTV, PA and network systems

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

ABOUT AMS

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the Project Team of TopSKY-ATC (HE).

ROLE DESCRIPTION SUMMARY

In this role you will work in an international multidisciplinary team focused on the Verification and Validation of the TopSKY HE product in order to confirm compliance to requirements and the fitness for purpose in accordance with Operational Scenarios. You will be responsible for the design and execution of the procedures and scenarios.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Verification and Validation Engineer, you are accountable for:

• Verification of the solution to confirm the system’s compliance to the Functional Baseline requirements
• Validation of the solution to confirm the system’s fitness for purpose in accordance with the Operational Concepts.
• Contribute in System Requirement Analysis activities to confirm requirements are testable and allocate a Verification Method(s) and Verification Phase(s), documented in the Verification Cross Reference Matrix (VCRM).
• Proactively participate in PI planning and backlog refinement including contributing to the effort estimation
• Conduct of the verification and validation tests in accordance with the Project Plan(s) and Project Schedule at the program’s relevant location (Thales ’premises, supplier premises and/or customer premises)
• Conduct of verification and validation tests during formal testing activities Acceptance Verification and Validation (AV&V) with the Customer.
• Communicate with both internal and external stakeholders for the V&V testing activities.
• Participate in System Requirement Analysis workshops, internally, with suppliers and with the Customer.
• Participate in Test Procedure Reviews and Test Readiness Reviews, internally, with suppliers and with the Customer.
• Report regularly on the progress of the testing activity against the agreed planning and budget
• Record the test results in the project Test Management System and any defects in the Defect Management System.
• Contribute to the Defect CCB by providing summary defect status and impact assessments
• Track and verify and validate defect corrections including regression testing.
• Maintain and retest test procedures as requirements are changed
• Produce Test Procedure Books and Test Reports.

· Support your Squad members (software, integration and verification)

· Support the Product Owner (PO) and Scrum Master (SM)

o Make recommendations on strategies to improve performance or productivity

o Identify risks, and proposing effective solution early and executing mitigation actions

o Provide input into the planning and coordination of program integration activities

• Contribute to the development of Policies, Processes and Procedures for the V&V activities best practice
• Leading Technical Working groups both internally and externally to define technical solutions
• Mentoring and support to all personnel involved in V&V activities, and contribute to succession plans for key V&V roles.
• Contribute to the development of V&V Engineering estimates for any modification proposals to the baseline in the context of projects/bids
• Work in accordance with the defined Thales processes and practices, and contribute to their improvement.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

• Degree in Engineering, Computer Science or related discipline

Essential Experience

· Test Engineering / Test Analyst experience of large, complex, real time software based systems (5+ years)

· Experience in Air Traffic Management Verification and Validation Scenario design and execution

· ATM experience in the following areas:

o Airspace

o Coordination

o ATM HMI

o Interpartition

o Adaptation/Configuration

· Experience with Air Traffic Management standards eg. ICAO, Eurocontrol, AID

· Application of domain knowledge to high value complex design, development and integration projects.

· Proven experience in conducting objective reviews of verification and validation artefacts

· Proven problem identification and analysis skills and system requirements analysis skills

· Experience in working in a multi-disciplinary integrated team environment

· A positive attitude combined with excellent interpersonal and motivational skills.

· Sound judgement and independent decision-making capability where necessary

· Excellent written and oral communication skills in English

Desirable:

· Experience in Air Traffic Management Operations

· Experience in System Engineering tools eg. DOORs, Jira

· Experience in Verification and Validation Tools eg. Vivaldi, Jira

· Experience in working in a Scaled Agile Framework (SAFe)

· International Software Testing Qualification Board (ISTQB)

· Advanced Test Analyst CTAL-TA Certification

· French Literacy

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Responsibilities:

• Be a member of the Process Engineering Team for top quality servers & storage products, maintain and update end to end production process & value stream mapping, cover end to end production process for better efficiencies thru process optimization, layout/work station enhancement as well as smart factory / automation projects
• Cooperate with the NPI PM team, Test Engineers, Quality, Production, Planning, Logistic and other departments to support production, including audit
• Support NPI ramp with propose new equipment, manage equipment readiness to support LVO, Engineering Change and customer requirement
• Ability to perform first level process issue triage and resolve issues locally where possible, analyze and identify process issue and deficiencies with follow up actions for resolution and improvement to meet goal for cost, quality and delivery.
• Escalate any process issue found to have major impact on quality, process and or cycle time if not able to resolve locally

Skills and Requirements:

• Bachelor’s Degree in Electrical / Electronics Engineering
• 3+ years of relevant work experience is preferred
• Strong IT background, experience with SAP is an advantage
• Technically know-how on Kaizen, 6 Sigma, PFMEA, DOE and/or 8D is a plus
• Experience with server & storage product is an advantage

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• Bachelor/master’s degree in Electrical/Electronic Engineering / Computer Science or equivalent
• With minimum 4 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms
• Strong communication skills, problem solving and analytical skills
• Candidate with more years of experience will be considered for a more Senior role.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Develop advanced video/image analytics technologies using both Computer Vision Algorithms and advanced ML/DNN
• Research technologies and concepts in the areas of Machine Learning, Computer Vision and Edge AI
• Participate in system design activities, prototyping and testing
• Follow and contribute to software development best practices

Qualifications

• At least a Bachelor’s Degree in Data Science, Computer Science, Engineering or similar
• Experience in developing Computer Vision applications, i.e. object detection & classification, object segmentation, computer vision algorithms, ML models optimization, etc.
• Experience with ML/DNN in at least one of the following frameworks: TensorRT, Tensorflow, Keras, PyTorch
• At least 2 years of experience with C++

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Experience:

• Computer vision: 3 years (Required)

Work Location: In person

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Job Responsibilities :

• Communicate, coordinate, and integrate department resources to enhance efficiency and achieve departmental goals and objectives.

• Oversee team member assignments, manage project scheduling, and track project progress to ensure timely and successful completion.

• Implement cost control measures and optimize resource allocation to maximize department performance.

• Foster team development through targeted training and mentorship programs, ensuring the success and growth of team members.

Job Qualification

• Master’s degree in a related field, such as Chemistry, Chemical Engineering, or Material Science.

• Over 5 years of relevant work experience.

• Strong knowledge of 12-inch semiconductor diffusion processes, including furnace, ion implantation, and Wet Bench System.

• Proven ability to identify, assess and solve problems

• Analytical with good interpersonal skills

• Team leader with execellent communication/coordination skill.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

The New Product Introduction (NPI) process engineer will provide Dermcut Medical Pte Ltd with technical support and operating knowledge for our medical device operation. This role will conduct critical engineering functions such as product validation, troubleshooting, identifying and implementing process improvements.

The engineer will work closely with project manager and is in charge of taking the prototype from pilot scale into full scale manufacturing in support of commercial efforts. This position will focus on developing various processes and implementing those to support mass production.

Primary Responsibilities

• Establish processes based on product specifications.
• Develop control plans, gage repeatability & reproducibility, test method verification & validation, and pFMEA.
• Identify areas of process improvement to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
• Co-ordinate the generation of dossier including but not limited to design files, technical files and project files to include design outputs, shelf-life studies, biocompatibility, sterilisation, risk analysis, validation master plans, IQ's, OQ's, PQ's and test regimes.
• Responsible for screening and optimization of process parameters to achieve robust and stable processes and maximize yields, efficiencies and process capabilities.
• Perform other related duties and responsibilities as assigned.

Education / Experience Requirements

• Bachelor’s degree in process engineering or similar qualification.
• A minimum of 2 years’ experience in the medical device industry.
• A strong understanding of validation strategy (IQ/OQ/PQ), support protocols and reports.
• Experience in root cause analysis of technical discrepancies/abnormalities.
• Familiar with FDA documentation requirements, ISO 13485 quality management system, lean manufacturing, and good manufacturing practice.
• Experience with SolidWorks and Microsoft Project preferred.

Job Responsibilities:

•Lots handling, WAT analysis and process optimization

•Device development, Yield trouble shooting and reliability improvement

•Fab transfer & Customers handling

•Customized structure process integration development

• To be responsible for helping to drive leading edge process/device development and optimization of devices in order to meet scaling, performance, reliability, and manufacturability requirements.

• Identify and solve IC process and device problems

Job Qualification

•Bachelor degree or above in Materials Science, Electrical Engineering, Chemical Engineering, Mechanical Engineering, Physics, Chemistry or a related engineer discipline.

• 5+ Years Experienced Process Engineering

• Fab 12" knowledge is preferred

• Knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles

•Good communication skills, be able to work within cross-functional teams, including internal and external partners

About Antina

Founded in 2020, Antina is a JV between Starhub Mobile and M1 and is responsible for the rolling out of the 5G Standalone (SA) Radio Access Network (RAN) in Singapore for the two mobile network operators.
The Standalone 5G (SA) RAN is a game-changing ultra-high speed, low-latency network, and one which will enable new use cases across entertainment, cloud gaming, transportation, education and healthcare. 5G is used across three main types of connected services, including enhanced mobile broadband, mission-critical communications, and the massive IoT.

Non-standalone 5G (NSA) was the first stage of 5G, using a new 5G radio (or 5G NR) access network overlaid on an existing 4G LTE network core. Standalone (SA) 5G uses the 5G NR access network on a brand new 5G network core. Both approaches provide value, but many of the most exciting new features and innovative use cases of 5G can only be realized through a standalone 5G network.

Purpose

The primary role of our Operations Engineer is to monitor and maintain 3.5GHz C-Band RAN systems to ensure operational efficiency and continuity for the company’s business.

Duties and Responsibilities

1. Carry out 24 x 7 daily monitoring of the 3.5GHz C-Band RAN systems’ faults and alarms.
2. Issue trouble tickets and tracked the fault resolution to ensure that any fault raised is responded to and resolved within the agreed SLA.
3. Coordinate with StarHub and M1 to develop, implement and maintain processes/procedures for daily operations, system configuration and maintenance activities.
4. Coordinate with StarHub and M1 to assess, plan, align, schedule and implement Change Request (CR) raised by StarHub and M1.
5. Generate monthly network performance and usage reports or any ad hoc reports upon request by StarHub and M1.
6. Coordinate and work with the equipment vendor, StarHub and M1 to test all gNode B software upgrade and patches with their respective 5G Core Network to ensure end to end compatibility.
7. Coordinate with equipment vendor, StarHub and M1 to schedule a mutually agreed timeline to load the software upgrades/patches to the live network.
8. Administer all system and user management functions of the 5G RAN OSS, which includes managing the access right of StarHub's, M1's and the equipment vendors, performing software and hardware upgrades, security functionalities and system maintenance (such as database maintenance).
9. For 5G Exploratory Platform (5GEP), to be the interface with IMDA to update on changes to network configurations, software versions and procedures.
10. Coordinate with StarHub and M1 to support project implementation and network expansions.
11. Interface with vendors and contractors on all operational and project support activities.

Requirements

Qualifications:

1. New graduate with NITEC, Diploma or Degree in Electrical/ Electronic/ Telecommunication or related qualification or possess at least two years of related working experience.

Technical Skills:

1. Preferable to have some knowledge in telecommunication networks, knowledge of cellular network would be an advantage.
2. Preferable to have some basic IP knowledge.

Interpersonal skills:

1. Maintain a strong learning attitude and able to keep up in a fast-paced environment.
2. Able to work independently and is also a good team player.
3. Possess good communication skills.
4. Strong commitment to work and have good initiatives.

How to apply

Apply here via myCareersFuture or send your CV directly to [email protected].

Antina is a company driven by ability and hardwork. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Visit our company website at www.antina.com.sg for more information.

Eigen Energy is a systems integrator for solar energy and electric vehicle charging infrastructure, with technical competencies in engineering and construction, energy management, software engineering and cross platform integration.

We are looking for a Assistant Engineer to assist with the scheduling, planning, forecasting, resourcing, and managing of technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

Roles & Responsibilities

• Lead installation team to carry out solar panel installation works which include installation of solar panels on the roof, installation of solar PV inverter and connection to the existing electrical switch board
• Manage multiple solar installation projects across Singapore
• Liaise with client, contactors and internal teams to ensure ontime project delivery
• Execute project installation with the M&E shop drawings provided by engineer
• Assist with ad-hoc duties if needed

Requirement:

• Minimum 2 years of working experience in electrical engineering, solar field is preferred
• Able to read and understand M&E shop drawings
• Able to work outdoor, under the sun

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom