Reporting to Technical & Planning Department Manager, this position will provide technical and process safety support for the manufacturing process to ensure production complies strictly with Company’s quality & safety standards and environmental regulations. This role will also be in charge of performing investigation to identify root causes for plant troubles and implement countermeasures and driving plant optimization initiatives.

Responsibilities:

• Oversee plant performance, issue operating instructions, conduct root cause analysis, investigate process failures, and recommend appropriate solutions or corrective actions.
• Coordinate Safety Case activities and liaise with other departments to ensure completion of all follow up actions.
• Lead HAZOP studies and other process safety assessments
• Handle raw materials and utility consumption analysis and efficiency improvement drive, which include managing evaluation meetings and following up on action plans and other operational tasks.
• Plan and conduct trial production for new products or raw materials, and initiate optimization ideas for process and process safety improvements
• Perform technical and process safety studies and share knowledge with other team members
• Conduct training for Plant members and in-house contractors
• Coordinate Management of Change and support plant investment projects such as budget planning, monitoring project progression and scheduling project meetings
• Maintain and improve Integrated Management System such as developing standard operating procedures and maintaining proper certification and documentation.
• Anticipate potential operational issues and recommend appropriate corrective actions.
• Promote continuous development and implementation of improvement ideas to enhance manufacturing competitiveness level

Requirements:

• Master’s Degree in Chemical Engineering or Polymer with 7 to 12 years or Bachelor’s Degree in the same discipline with 9 to 14 years of relevant working experience in Chemical Engineering in a polymer plant
• Strong leadership and communication skills and effective team player
• Self-motivated, independent and resourceful
• Proficient in Microsoft Office applications
• Knowledge in HAZOP, Risk Assessment, DCS, ISO standards would be advantageous
• Proficient in Japanese language as the role is required to liaise with counterparts and understand the Company policy and standards from Japan Headquarters
• Able to perform overtime work when required
• Willing to work in Jurong Island
• Overseas travelling is required

General Summary

Currently, we have a great opportunity available for an Chemical Operator, ETP to join our Production Team/Group/Dept. This position will be located in our Singapore branch and will report directly to the Production Engineer. The ETP operator is responsible for safely and efficiently operating all equipment necessary to manufacture atmospheric emulsions, reactor batches, pilot batches, and cold-blend products. This position is also responsible for performing quality control testing, packaging product for shipment to customers.

Primary Responsibilities

· Communicate with Shift Team Leaders and Production Engineer regarding safety, production, quality, or any other operational issue

· Manufacture batches in accordance with all safety, quality, and efficiency standards by following work orders and verbal directions

· Safely and efficiently operate reactors, emulsion kettles, Cowles mixers, homogenizers, heat exchangers, pumps, filtration devices, automated packing stations, forklifts, and other equipment related to the manufacture of chemicals

· Correct packaging of finished goods into pails, drums or totes as required.

· Efficient operation of the wastewater treatment plant, soft water process and boiler operation when necessary

· Use equipment to monitor pressure, temperature, and other hazardous conditions

· Monitoring of SCADA systems

· Execute process parameters warning alarm systems

· Wear proper Personal Protective Equipment (PPE) when required

· Perform quality control testing and adjust batches to ensure specifications are met through water adjustments, debugs, reheats, etc.

· Perform required calibrations on equipment in accordance to ISO procedures

· Ensure accurate documentation and inventory accuracy in accordance to established doctrine

· Use all equipment safely and ensure safe operation of equipment by coworkers

· Maintain clean work areas in accordance with 6S protocol

· Assist in the manufacture of new products and establishing procedures

· Prepare sample as per customer request

· Assist in the prevention of quality problems and the establishment of solutions for existing issues

· Perform related duties as assigned or as the situation dictates

· Live our Values & Behaviors

· Collaborate effectively within a highly matrixed global environment

Other

· Perform related duties as assigned or as the situation dictates.

· Must be able to climb stairs, stand for extended periods of time, and safely lift up to 40 kg

· Must be able to wear required Personal Protective equipment (PPE) for extended periods of time

· Must be able to pass Pulmonary Function Test

· Must be able to operate forklift safely

· Must show proficiency in the operation of all necessary equipment

Critical Competencies, Knowledge, Skills, and Abilities

· Basic math and computer application skills

· Basic mechanical maintenance & troubleshooting skills (eg, mixer, motor & pump) will be a plus

· Knowledge of SCADA, PLC Programming & DCS system will be advantageous

· Ability to think independently and handle tasks through to completion in an efficient manner

· Ability to adapt to changing demands and to react positively to verbal instructions given by a Team Leader or other superior

· Excellent oral and written communication skills

· Proven ability to follow procedures and handle multiple tasks, effecting a positive outcome

· Willingness to work in a team environment

Education and Experience

· “ITE”/ Diploma level

Work Hours

Michelman’s standard work hours for this role is a 12 hours rotating shift, day shift will start from 7am to 7pm and night shift will start from 7pm to 7am.

Job Description

Candidate applying for this position shall research, develop and implement AI robotics to create an intelligent environment in the robotics for autonomous manufacturing.

Roles & Responsibilities

• Lead stakeholder discussions to grasp problem statements, requirements, and expectations.
• Conduct technology scouting for industrial robotic applications and automation best practices.
• Perform process mapping and feasibility analysis for robotic processes.
• Develop smart robotic automation options, project proposals, and scoping.
• Engineer and conceptualize robotic processes.
• Program robotic motion using simulation-based techniques.
• Execute the project lifecycle for robotic process development and implementation.
• Prepare technical project documentation and presentations
• Develop and optimize advanced robotic algorithms for perception-guided manipulation.
• Maintain and support software components for manipulation systems.
• Collaborate with hardware engineers to integrate software solutions.
• Create and implement transfer learning models for various machine learning tasks.
• Collaborate with domain experts to tailor transfer learning models to specific business needs.
• Utilize transfer learning to enhance expert skill efficiency and applicability.
• Stay updated on the latest advancements in transfer learning and skill adaptation.

Job Requirements

• Relevant Engineering degree with focus on robotics or mechatronics.
• Minimum 2 years of experience in industrial robotic automation development and deployment.
• Expertise in ROS and programming languages like C++, C#, Python, or JavaScript.
• Knowledgeable about Linux platforms and command line operations.
• Deep understanding of robot manipulation and kinematics.
• Proficient in CAD software, especially Siemens NX.
• Strong in industrial and collaborative robot programming.
• Familiarity with offline robot programming software like ABB-RobotStudio, Robotmaster, or RoboDK.
• Experience with machine learning frameworks (TensorFlow, Pytorch, Scikit- Learn, Caffe) and computer vision tools (OpenCV, PCL) is advantageous.
• Skilled in working with diverse datasets and applying transfer learning.
• Proficient in rapid prototyping and constructing neural network models efficiently.
• Strong problem-solving skills and analytical mindset.
• Effective communication and stakeholder interaction abilities.
• Adaptable, hands-on, and self-motivated approach to work.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Scope:

• To carry out water sampling for process unit and send to lab for analysis and follow up with the recommendation in process.
• Operate Boiler / Evaporator / cooling tower / RO in the WasteWater Plant
• Control Pane operation through SCADA system to monitor and adjust process parameters.
• To update test result in data system
• To handle general workers in the plant for daily plant works and chemical handling
• To maintain all the process units/ pumps and equipment’s and instrument in good condition.
• Company Emergency Response team member
• To support shift ad-hoc operation

Requirement:

• Education – NITEC & above
• Skills - Basic English communication includes reading and writing skill
• Abilities – Ability to work independently
• Other characteristics such as personal characteristics – Team player with interpersonal skills (gentle, considerate and patient)
• People certified with Forklift / WAH/AWSHPP/ Boiler attendant class-1 have added advantage.

1.1. Broad Functions:

The primary responsibility of a Production Process Technician is to support the efficient and safe operation of the plant's production processes. They play a crucial role in ensuring that equipment and systems function optimally, production runs smoothly, and product quality meets the required standards.

1.2. Job Description / Responsibilities:

1.2.1. Ensure the smooth operation of the production plant.

1.2.1.1. Follow work SOPs.

1.2.1.2. Observe safety rules and 5S.

1.2.1.3. Ensure cleanliness of work area, upkeeps equipment and assist in the maintenance program and operating of production machinery and equipment.

1.2.1.4. Assists in loading and unloading of ISO tanker, raw materials, carries out chemical waste sorting, waste transfer and stock keeping.

1.2.1.5. Collect process data.

1.2.1.6. Routine plant logging

1.2.1.7. Conduct site walks to discover abnormalities.

1.2.1.8. Conduct material weighing and charging (PA & RE)

1.2.1.9. Assist TL in troubleshooting plant issues.

1.2.1.10. Grade change cleaning activities (PA & RE)

1.2.1.11. Perform confine space Tank cleaning (PA & RE)

1.2.1.12. Reactor cleaning (PA)

1.2.1.13. Conduct process gas and product sampling using gas chromatography (RE)

1.2.1.14. Perform weekly PH meter calibration (CHE & PA)

1.3. Requirements:

1.3.1. Min “O Level or equivalent or NITEC in Chemical Engineering or equivalent

1.3.2. Fresh graduate acceptable

1.3.3. Relevant working experience in a chemical manufacturing industry is an advantage.

1.3.4. Computer-literate able to perform data entry and use Microsoft Excel

1.3.5. Good communication skills

1.3.6. Hands-on and able to multi-task

1.3.7. Self-disciplined, good team player,

1.3.8. Responsible and independent worker

1.3.9. Have a safety mindset.

1.4. Others:

1.4.1. Location: Jurong Island (Company Transport provided)

1.4.2. Commence work: ASAP.

1.4.3. Applicants can work in Singapore without requiring a work pass.

1.4.4. Working Hours: 12-hours Rotation Shift

1.4.5. Salary Range: 2.0K to 2.4K

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 1-2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Oversee various stages of full project deliveries covering requirements gathering and analysis, design, construction, delivery, integration, testing, commissioning, and maintenance services
• Map out the overall project management plan and ensure that the roles and responsibilities, objectives, commitment, deliverables, schedule, and risks are clearly defined and communicated to team members and customers
• Establish a risk management plan for a structured approach to identify and review potential risks and mitigation actions
• Manage project budget and costs with the objective of maximizing revenue and margin achievements.
• Establish a project execution plan and schedule for tracking of deliverables within the scheduled milestones
• Build a high-performance delivery team, comprising both onsite and offshore resources, and provide effective leadership for the team members
• Oversee the entire project delivery life cycle within scope, schedule, and budget
• Maintain a pro-active and responsive relationship with all stakeholders, both internal management and customers, to provide regular and accurate progress updates, problem reporting and resolution processes
• Perform other duties as assigned

Requirements

• Min Degree in Mechanical / Electrical / Environmental Engineering (Degree must be recognized by the Professional Engineers Board, Singapore)
• At least 10 years of relevant experience in the implementation and management of qualify control systems
• Hands-on” attitude, meticulous and analytical with excellent problem-solving skills
• Professional project management certification (e.g. PMP, CITPM, etc) is preferred
• Team player with good interpersonal and communication skills
• Able to work under pressure, resourceful and independent with good negotiation skills

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

The Global MSAT team will support the Biologics Operations strategy, in particular regarding customer centricity, providing harmonized deployed services and more consistency in execution. It will also support the new technology introduction that we forecast in the coming years, with accelerated timelines. Internally, this team will have a close interface with R&D and Group Operations for early alignment, priority setting, planning and execution of our global improvement agenda. The technical diversity, strong teamwork and cross functional collaboration in a fast paced working environment makes the MSAT roles dynamic, exciting and rewarding, offering excellent personal and professional development within the function and across the Lonza global biologics network

This senior scientific role will be part of a Global MSAT Biologics team and will be responsible for providing technical leadership and know-how directly with cross functional teams across the Lonza Biologics operations network on a day to day basis, supporting Global project implementation to the sites and ensuring all project time lines and objectives are consistently monitored and delivered. The role will focus in areas of strategic material harmonization, new technology introduction, continuous process improvement and cross site process tech transfer, working closely with network site functional teams.

Key responsibilities:

• Responsible to oversee implementation of harmonization projects into the Global network sites, developing deployment plans cross functionally and supporting the on-site teams during all phases of transfer to meet business targets (as required)
• Responsible as a point of contact for support and resolving critical network technical problems (as required), working cross functionally across sites to maintain internal and external customer project outcomes e.g. Global QA Alerts.
• Responsible to provide daily technical coaching and mentoring to members of the Global and site MSAT teams with specific technical problem resolution and improve operational execution. Supports the training and knowledge transfer to improve overall expertise and capability of the Global MSAT network.
• Accountable to maintain and establish a professional internal and external network to maintain technical and compliance knowledge and know how consistent with the role objectives and team development.

Key requirements:

• PhD or equivalent means of demonstrating ability with considerable experience in industry and/or a relevant biologics development or manufacturing environment
• Has demonstrated extensive knowledge in field of expertise either from process development or a cGMP manufacturing operations background and on-the job training, working as either as an individual contributor or in a management supervisory role.
• Recognized Subject Matter Expert (SME) in field of relevance e.g. biologics process development or from working in a cGMP MSAT environment. Ability to technically understand complex non routine unit operations with a proven track record of successful technical transfer expertise.
• Has experience leading implementation / harmonization projects involving cross-functional, multi-site teams.
• Has a deep understanding of manufacturing science and process as a whole and also Lonza’s business practices and customer expectations.
• Experience of material qualification and specification setting is desirable.
• A role model in demonstrated interpersonal skills with ability to work with others in a technical coaching capacity.
• Works well with both internal and external customers in problem resolution. Experience in leading cross functional project activities with ability to multi task, prioritize and be an effective decision maker.
• Proven problem solver has an excellent technical attention to detail, communication skills both written and verbal, interpersonal qualities with a continuous improvement positive mind set.
• Proven experience working with external and/or internal customer peers on technical planning, design and execution of technical scopes of work, showing resilience and tenacity to deliver on time against goals and objectives

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Ensure safe and optimal operation of process units
• Ensure workplace safety by proper asset upkeep, supporting function testing on safeguarding system and proper control on work activities in the plant
• Participate in plant shutdown & start-up and process unit troubleshooting work activities

• Diploma or NITEC in Chemical Process Technology (Petrochemicals or Pharmaceuticals) OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE / Polytechnic engineering graduates are welcome to apply as training will be provided

Job Description

• Oversee project execution during design, construction and testing and commission works for water and wastewater treatment works or process plant engineering and construction works.
• Lead the technical presentation to Client and Consultant
• Coordinate with Client, Consultant, Client Site Technical Representative(s), Subcontractors and Suppliers during project execution.
• Process Mechanical Work Design in water and wastewater treatment plants and pumping station and pipeline.
• Prepare and submit Process Mechanical Technical particular to Consultant/Client and following up on technical submission till its approval/acceptance by Consultant/Client.
• Control and monitor process mechanical work progress with Sub Contractors and suppliers on the mechanical technical documentation and physical work deliverables.
• Assist PM on progressive monthly claim and payment response matters with Sub Contractors and Suppliers.
• Coordinate with Project QS/PM for establishing of contractual scope of mechanical works and its technical requirements and participating in calling of quotation and assists Procurement Team during awarding of Sub Contract/Supply Contract.
• Prepare O&M Manual and As Built drawings for handing over to client.
• Support PM for project schedule or manpower arrangements.

Requirements

• Degree in Mechanical/Chemical/Environmental Engineering。
• Experienced Mechanical Engineer with qualifications recognized by the PEB Singapore.
• At least 15 years of relevant experience in plant construction fields and preferably in Water and Wastewater Industries in Singapore or in Southeast Asia Region.
• Have experience in water and sewerage pumping station including pipe laying works.
• Good knowledge of Design/Coordination and the Code of Practices and its requirements such as American Standard, British Standard and Singapore Standards.
• Good knowledge of relevant software: Microsoft Office (Word and Excel). Knowledge of CAD, BIM, and Project Scheduling will be an added advantage.

Responsibilities:

• Supervise design schedule, estimates and drawing updates
• Control of all design & engineering documents
• Review of tolerances and constraints on new products prior to estimation
• Continuous development of cost saving activities
• Allocate and monitor schedules quality and cost for subcontracted design & tooling
• Support the Sales dept on design-related function
• Involve in all tooling designs & pre-sale activities (Prototype & quotation)
• Ensure tooling meet the production requirements
• Make tooling improvement to meet higher productivity

Requirements:

• Degree in Mechanical Engineering or equivalent
• 3-5 years hands on experience in precision metal stamping process/multi-slide forming
• Competent in tool design and conversant with CAD and geometric tolerance
• Meticulous and detail-oriented
• Able to prioritize workload and meet deadlines
• Team-player, self driven and able to work under pressure with a sense of urgency and meet tight deadline

Experience with injection molding, double disc grinding, and machining is an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Maintain budgets and adjust according to needs as they arise.

Track performance and analyse the completion of key goals.

Document and report project progress to stakeholders and clients.

Problem solving skills with for to manage the pressurised situations.

Coordination and good communication with our own team for project support and sharing experience.

Field Engineer - Job Summary

A Field Engineer is responsible for overseeing and managing engineering projects at construction or operational sites. They ensure that the work is executed according to plans, specifications, and safety standards. This role combines technical skills with hands-on fieldwork to address real-time issues during construction, installation, and testing.

Key Responsibilities:

• Project Supervision: Oversee construction or installation processes, ensuring work meets project specifications and quality standards.
• Site Inspections: Conduct regular site inspections to monitor progress, identify issues, and ensure safety protocols are followed.
• Coordination: Work closely with contractors, engineers, and other stakeholders to ensure efficient execution of the project.
• Documentation: Maintain detailed records of work progress, site conditions, and any deviations from the original plans.

Skills & Qualifications:

• A Bachelor's degree or Diploma in Civil Engineering, Mechanical Engineering, Electrical Engineering, or related fields.
• Fresh graduates are welcome to apply, with on-the-job training and mentorship opportunities.
• Strong problem-solving, communication, and organizational skills.
• Ability to work in field environments
• Able to work under pressure.

Our manufacturing company designs and manufactures metal precision components, molds, and precision-pressed materials.

Of course, people with Process experience are of the utmost importance but they have to be able to speak English and be able-bodied for the job posted.

Malaysian PRs welcome to apply.

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

• Collaborate with engineers, architects etc. to determine the specifications of the project
• Negotiate contracts with external vendors to reach profitable agreements
• Obtain permit and licenses from appropriate authorities
• Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations.
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Acquire equipment and materials and monitor stocks to timely handle inadequacies
• Supervise the work of laborers, mechanics etc. and give them guidance when needed
• Evaluate progress and prepare detailed reports
• Ensure adherence to all health and safety standards and report issues
• Materials quantity take off , Drafting works if necessary

Job Requirements:

• Proven experience as Project Manager
• In-depth understanding of construction procedures and material and project management principles
• Familiarity with quality and health and safety standards
• Outstanding communications and negotiation skills
• Able to use Microsoft office , microsoft project , autocad , revit , naviswork and other engineering softwares skillfully.
• Excellent organizational and time-management skills
• A team player with leadership abilities
• Advances time management and analytical skills
• Excellent client-facing communication skills
• Candidate must possess at least BSc/BA in Engineering Civil) or Engineering (Metal Fabrication/Tool & Die/Welding) or relevant field (Degree is recognized by BCA will be an advantage)
• 5 years' experience in Project Management (Metal Works)
• Able to liaise with Chinese client

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Job Duties and Responsibilities:

• Provide technical support to resolve technical inquiries from ships/vessels on Nordic Systems.

• Attend on-board service attendances and commissioning services, annual inspection and maintenance for vessels based on troubleshoot of the technical issues and feedback by chief engineer/vessel managers.

• Review service reports, customer technical specifications and provide support to sales team for bidding of spares.

• Troubleshoot issues involving electrical/electronic control systems, PLC products.

• Read and understand manuals, schematics, and P&ID's.

• Lead the preparation and coordination of ITRs based on approved electrical completion procedures.

• Prepare and update status of punch list and ensure all cleared punch items to be acknowledged by the client reps.

• Monitor and manipulate site execution in line with sequence of works.

• Handle technical issues, drawings, reports, procedures and any other relevant documents.

• Develop engineering capabilities and work with sales team on project proposal and bidding.

• Selection of equipment, materials for instrumentation and controls.

• Execution of projects.

• Plan and carry out E&I maintenances

• Manage Subcon and other adhoc activities, lead the team of technicians on site to execute the project.

Job Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.

• Prior experience in the Maritime/Oil & Gas industries and shipyards will be highly advantageous.

• Excellent verbal and written communication.

• Possess excellent interpersonal and communication skills.

• Responsible, Meticulous and able to work under pressure.

• Proficient with Microsoft Office Applications (Outlook, Word, Excel, Power Point, etc).

• Experienced in PLC/SCADA systems.

• Fluency in English (verbal and written) is essential.

Working hour: 8:30am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Scope

· Designing, manufacturing, and installing components that fulfil requirements.

· Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement) （Preferably IN MARINE&OFFSHORE&MANUFACTURING INDUSTRY）

· Analyzing problems or deficiencies and developing solutions to resolve them.

· Conducting experiments and evaluations to improve and innovate product designs.

· Creating plans and designs using CAD technology.

· Evaluates final product’s overall performance, reliability and safety.

· Estimating budgets and time scopes for each project.

· Writing technical documentation for machine operators.

· Ensuring that products meet compliance regulations.

· Collaborating with project managers and other engineers in our team.

· Liaison with vendors on finalization of modules.

· Responsible for mechanical documentation.

Requirement

· Degree in Mechanical / Mechatronics Engineering or related disciplines with 3years’ experience.

· Diploma in Mechanical / Mechatronics Engineering or related disciplines with 5 years’ experience.

Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

• Create detailed designs and layouts for steel structures using CAD software (e.g., AutoCAD, Tekla, SolidWorks)
• Develop accurate structural drawings, including framing plans, connection details, and assembly drawings.
• Perform design calculations to ensure structural integrity, load-bearing capacity, and compliance with codes.
• Strong knowledge of steel structure design principles and software (e.g., STAAD.Pro, Tekla, SAP2000).
• Familiarity with construction materials, fabrication processes, and assembly techniques.