Key Responsibilities:

• Managing external electrical subcontractors to ensure that works are in compliance with class, drawings, installation procedures and quality processes.
• Reviewing and proposing to management the most suitable electrical and electronics equipment for newbuild vessels.
• Managing troubleshooting processes and root-cause analyses.
• Checking calculations and drawings for electrical and electronics systems and interfaces.
• Overseeing project documentation and liaising with class, regulators and clients.

Basic Requirements:

• Diploma / Degree in Electrical Engineering.
• Strong, knowledgeable and results-driven leader.
• Minimum 5 years’ experience in a similar capacity, preferably in aluminium high-speed vessels.
• Sailing experience in an engineer’s capacity would be an advantage.
• Working knowledge in programming, automation and PLC would be an advantage.
• Effective communication skills in written and spoken English.
• Proficient in relevant Microsoft Office programs, including Microsoft Project.

Others

• 5.5 days work week
• Two-way company transport provided to and from Boon Lay / Lakeside / Bukit Batok / Jurong East

Your remuneration will commensurate with your experience and qualification.
Your career advancement will depend on your attitude and contributions.
KEEP CALM AND JOIN US!
Interested applicants please forward your detailed resume to
Penguin Shipyard International
21 Tuas Road
Singapore 638489
Email: [email protected]
Only shortlisted candidates will be notified. Thank you.

Job Description

• Carry out works scheduling, material requisition, cost control, site supervision and documentation.
• To supervise the site works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Ensure timely and smooth progress of works.
• To perform QA / QC role on area assigned and to ensure safety regulations are being compiled on site.
• Prepare various reports & RA (progress report, project handover report and etc.).
• Any other duties that may be assigned.
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

Requirements

• 2 years of relevant experience or fresh University/Poly/ITE graduate
• Mechanical Engineering
• Working location at Tuas

Responsibilities:

• Determine the scope based on requirements, including stating the scope of work, calculating the resources required in delivering the service and advising the senior system engineer preparing the quotation
• Install and configure services as per the approved implementation plan
• Carry out technology, professional and maintenance support services as per scope within the stipulated duration/ timeline
• Provide level 1 support (basic hardware break-fix & troubleshooting of hardware and software issues ) for installed services
• Provide technical deliverables such as high level design document, user acceptance test (UAT) doc and as-built documentation
• Provide outstanding quality of service and meet predefined customer service level agreement (SLAs)
• Undergo technical trainings and obtain technical certifications that are required to meet suppliers’ mandatory technical requirements
• Conduct knowledge transfer training (where required) 

Knowledge, Skills and Experience:

• Minimum 3 years of relevant experience
• Certified in at least one of the technology domain (Infrastructure hardware and software, hyperconvergence, network, security, cloud and/or end user computing)
• Strong technical knowledge on the assigned solution domain/product
• Knowledge of product portfolio in other technology domain is desirable
• Expertise in enterprise products implementation, migration and support.
• Strong interpersonal skills with a customer-centric attitude
• Strong oral and written communication skills
• Strong attention to technical details, priority management and planning skills
• Ability to work independently with little to no supervision
• Results-oriented
• Strong documentation skills

What’s In It For You?

• Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.
• Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.
• Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.
• Diversity, Equity & Inclusion: It’s not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.
• Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.
• Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.

Don’t meet every single requirement? Apply anyway.

At Tech Data, a TD SYNNEX Company, we’re proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you’re excited about working for our company and believe you’re a good fit for this role, we encourage you to apply. You may be exactly the person we’re looking for!

1) Liaise with Customer for Software requirement and specification.
2) Design the Control & Software Structure, Programming, Testing, implementation and customer support
3) Prepare Machine Operation Manual and Documentation.
4) Work with Project Team for on time delivery of the project.1) Degree in Computer Science / Electrical / Electronic Engineering or equivalent.
2) Minimum 3 years' experience in Software PLC Programming for Omron / Allen Bradley and Siemens PLC.
3) Strong oral and written communication skills. Able to speak & write in English and Chinese in order to liaise with Chinese speaking associates.
4) Must be prepared to travel to jobs sites/overseas.
5) Goal oriented and working directly with clients and other professionals with minimum supervision.
6) Experience in AutoCAD for electrical drawings.
7) Full time position
8) 5.5 days working days

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Clash checking in AVEVA
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Clash checking in AVEVA
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting,plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement form AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layoutand Piping General Arrangement from AVEVA
• Etraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and oyther discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

• Plan and carry out preventive maintenance throughout the hotel to ensure that standards are maintained for guest comfort.
• Ensure the smooth daily operation in the department through supervision, delegation of duties and coordinate all engineering activities within the Hotel.
• Ensure the preventive/ corrective maintenance for all the hotel’s facilities are done promptly.
• Conduct routine checks and log data of all facilities, following up on faults and repair works if required.
• Perform property/ room preventive maintenance inspection and update.
• Perform incident investigation and prepares report.
• Assist in fire safety procedures within the Hotel
• Monitor the service and maintenance of all equipment and controls.
• Schedule preventive and corrective maintenance.
• Maintain the tidiness of the store, workshop and check on the tool inventory.
• Ensure that all spare parts are available for use whenever required and proper storage of supplies & materials.
• Maintain fire-fighting facilities and equipment in compliance to the Fire Safety regulation.
• Perform regular energy/ defect analysis and be involved in energy management.
• Keep up to date on safety-related administrative documents.
• Ensure his/her own safety and the safety of others during interventions and those of the external service providers.
• Be available to carry out emergency maintenance work outside of normal working hours, as required for: full power failure, evacuation fire system re-set and / or failure of mechanical systems.
• Maintain records of repair work and daily checks as required by the local Council, Government and Manufacturer specifications.
• Ensure the external areas of the hotel are neat and tidy and maintained in line with Company brand standards.
• Strive to honour the Accor Vision and demonstrate active use of Accor Values.
• Any other reasonable request within your range of competence as required by Management.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Supervise and oversee the sequential activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL' s Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritise from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.
• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site.
• Communicating with Project Management Team / QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works.
• Assist with the management of internal and external third party interfaces.

Requirements

• Diploma or Degree in Electrical and Instrumentation
• Min 3 to 5 years work experience as Electrical Project Engineer in Oil and Petrochemical Construction Industry
• Experience in project co-ordination with client, engineering and procurement departments
• Experience in co-ordinating with site construction team for installation, testing and commissioning works
• Preferably with overseas experience
• *FRESH GRADUATES ENCOURAGE TO APPLY*

IPS is hiring! We are looking for a talented Senior Project Engineer to join our industry leading Engineering team at our growing office in Singapore.

The Senior Project Engineer will manage deliverables from design team for excellent inter-discipline coordination. Will be responsible for Engineering Deliverables’ overall Quality, Services Cost and Design schedule. The assignments include specific tasks on project teams and the Project/Design Manager should use their education, creativity and expertise to resolve Inter-disciplinary engineering problems and tasks as assigned.

Job Duties and Responsibilities

• Client Coordination - Overall responsibilities, both fiscally and technically, for the project while maintaining customer relations.
• Interdisciplinary Team and Design Coordination - Responsible for overall design deliverables and coordination with interdisciplinary design team.
• Generates/Supports Development of Design Deliverables including Specifications, Data Sheets as well as supporting Design narratives.
• Adheres to Project/ design scopes of work for each project and alerts Client and Management about changes or requests for additional services.
• Generates/Supports Development of Equipment Requisitions & Works’ Packages for bid.
• Generates/Supports Development of techno-Commercial Bid Analysis
• Coordinates Review of vendor submittals and documents
• Coordinate with Client and provides design team with required input
• Sees that satisfactory relationships are maintained with internal and external team - clients, consultants and other project team members.
• Provides site support on projects as required.

Qualifications & Requirements:

• Minimum of 8 years of Process/Mechanical engineering design experience, preferably in the Pharmaceutical, Biotech or Bio-Pharm industry.
• Bachelor’s Degree in Chemical/Mechanical Engineering.
• Proven experience of Interdisciplinary Design Coordination and Client/Internal Team Management.
• General knowledge of Bio-Pharma Process system design and applicable codes in Process/Mechanical engineering.
• Strong Design background and Technical focus
• Has a demonstrated strong time management skills and the ability to manage Design/Engineering deliverables on Bio-Pharma/cGMP Clean Industrial projects,
• Good Verbal and Written Communication and Problem solving Skills are essential
• Pharmaceutical, Biotech or Nutraceutical industry experience is required.
• AutoCAD experience will be an advantage.

Company Overview:

About Us

IPS-Integrated Project Services is a global leader in developing innovative and cost effective solutions for the engineering, construction, commissioning and qualification of complex pharmaceutical and biotech research and manufacturing facilities. With technical expertise spanning R&D to pilot-scale to large-scale production, our team specializes in the technology, trends and regulatory environment to successfully deliver capital projects and improve operations. For over twenty years, we have applied unique LEAN methodologies throughout the project life cycle, continually finding ways to do things better and more efficiently, delivering higher quality and controlling costs. Headquartered in Blue Bell, PA, IPS is a multi-national company with over 900 professionals worldwide and offices in California, Indiana, Kansas, Massachusetts, New Jersey, North Carolina, Pennsylvania, Brazil, Canada, China, Singapore, Switzerland, UK and four locations in India. Visit our website at www.ipsdb.com.

JOB SCOPE:

• Need draw engineering construction Drawings.
• Draw curtain wall and window Drawings
• Support the Teammate in carrying out the responsible.
• Need to go to the construction site for inspection
• Other duties assigned.

Job Requirement:

• Preferely familiar with AutoCAD.
• Self-motivated individual with a positive attitude.
• Able to multi-task and work in a fast-paced environment.
• Good Interpersonal skills

• Perform the project engineering design work.
• Liaise with clients, vendors and third parties on technical discussions and document submission.
• Coordinate with project team on the project planning and execution.
• Supervise and check the design drawings, material take-off and shop drawings
• Perform structural analysis and prepare structural analysis report.

Qualification

• Degree in civil/marine engineering / naval architecture
• Min. 2 years of structural design experience in offshore or civil engineering
• Being Familiar with and experience in international structural aluminium and/or offshore structure design codes and standards to be an advantage
• Knowledge in Staadpro/Tekla to be an advantage.
• An effective team player, problem solver and self-motivated
• Good written and spoken English.

• Lead the project engineering design work.
• Liaise with clients, vendors and third parties on technical discussions and document submission.
• Coordinate with project team on the project planning and execution.
• Supervise and check the design drawings, material take-off and shop drawings.
• Perform structural analysis and prepare structural analysis report.

Qualification

• Degree in civil/marine engineering / naval architecture
• Min. 5 years of structural design experience in offshore or civil engineering
• Being Familiar with international aluminium and/or offshore structure design codes and standards to be an advantage.
• Knowledge in Staadpro/Tekla to be an advantage.
• An effective team player, problem solver and self-motivated
• Good written and spoken English.

Control Engineer

Main Responsibilities

• Responsible to assist in the design of controls system and programming to meet the budget and time expectations of the project.
• Able to Modify controls design and other documents according to the Standards and compliance to industry standards as according to project specification.
• Develop specific program per customer and project requirements.
• Knowledge in Allen Bradley, COMAP and Siemens-S7 programming.
• Knowledge in instruments, control valves and shutdown valves troubleshooting.
• Knowledge in various industrial communication protocols like MODBUS, Ethernet etc.
• Knowledge in control panel design as per project requirement.
• Participate in controls and validation activities, conduct test and debug, FAT and SAT.
• Work together with the Customer, Process engineer, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Ability to communicate in an open, clear, precise and effective manner.

Requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent;
• Minimum 3 years of related work experience in oil and gas industry.
• Must be able to travel as requested.
• Must be available to work overtime.
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment.
• Well organized and respectful of project deadlines.
• Positive attitude.
• Target and result orientation.

Well-versed in retrofitting of Engine and crankshafts within time

· With enriched experience in troubleshooting of two stroke and four stroke engines

· Sound knowledge in framing and executing of scheduled maintenance plans, estimates, and contract specifications.

· Well adapted to Preventive, Conditional based Predictive & Break down maintenance of Engines and plant utilities

· Laid down SOP’s and MIS reports and have knowledge in implementation of ISO-9001 -2001, 18000 - 2007, 14000 – 2007.

· Conducted operational and performance tests on marine machinery and equipment on behalf of makers like Hyundai and Yanmar.

· Prepared technical reports for the final evaluation by regulatory and insurance bodies.

• Understanding and carrying out all tasks given by the Senior Engineer.
• Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.
• Ensuring all expenses stay within the allocated budget.
• Performing regular inspections of equipment and scheduling maintenance or repairs.
• Providing assistance to different staff or engineering teams.
• Inspecting inventory and reporting inconsistencies as well as ordering more materials.
• Producing CAD drawings according to specifications.
• Evaluating all products and processes and ensuring standardization of quality assurance measures.
• Participating in various learning experiences, which may include attending workshops and training sessions.
• Calibrating and troubleshooting equipment as required.

Requirements:

• A completed apprenticeship or similar experience is recommended.
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Practical experience using CAD software may be required.
• Ability to follow instructions and to collaborate with others.

• Marine & Offshore industry
• Basic $4000 - $6000
• 5 days (8.30am – 6.00pm)
• Location: Penjuru Lane
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Electrical Design: Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Commissioning and integration: Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• System Optimization and Performance Enhancement: Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Documentation and Reporting: Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Regulatory Compliance and Safety: Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.

Requirements

• Min Diploma in Electrical Engineering or related.
• Min 3 years of experience in Electrical Design in Marine/ Automation/ Automotive industry.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

YOUR DAILY JOURNEY

As a member of a multidisciplinary development team, the Build Engineer will collaborate with different teams in Singapore Studio and other Ubisoft Studios to design, implement and maintain CICD pipeline solutions for production

WHAT YOU WILL DO

• Monitor, communicate and resolve CICD pipeline incidents. Follow up on topics in relevant support channels
• Collaborate with development team to improve the reliability, scalability and performance of the pipeline solutions
• Collborate with Production to support co-development studios and external teams
• Identify potential risks and challenges, to actualize optimal pipeline solutions
• Manage and maintain source control branches, integration flows
• Setup and maintain server resources such as build machines
• Maintain documentation for workflow methods, pipeline solutions and project tools, and promote best practices
• Manage access permissions for various project resources like Perforce and AD

The candidate will work on developing an intelligent and sustainable Energy Management System (EMS) for Residential Air Conditioning (RAC). The candidate will assist in:

• Developing learning-based algorithms to optimize RAC operations based on energy cost, PV energy generation, and comfort requirements.
• Developing predictive models.
• Conducting and evaluating the control strategies in case studies.

Company:

Sopra Steria is a listed European tech leader specializes in Consulting, Digital Service, and Software. We have 50,000 employees worldwide located in different regions (Europe, North America and Asia), whereby Singapore is the HQ for APAC. EvaGroup Asia Pacific is part of Sopra Steria I2S APAC, in charge of Infrastructure, Cloud and Cybersecurity services.

Description:

The ideal candidate for this position will have experience in Networking technologies such as Routing, Switching, and experience in Ansible (Yaml), python and scripting for creating Network Automation.

Responsibilities:

• Maintain and upgrade client’s network and connectivity to other offices, regional exchanges, collocation sites
• Provide network design, solution deployment, and technical documentation for network and security related equipment such as Firewall, Load Balancer, IPS, proxy etc
• Translates business requirements into technical designs that ensure availability, stability, scalability, security and ensure the solutions comply

 Competencies Required:

• Knowledge of routing, BGP, OSPF, EIGRP, IP multicast, QoS, VPC, Spanning-tree
• Proficiency in managing Cisco, Checkpoint, PaloAlto and Fortinet firewalls
• Familiarity with network monitoring and troubleshooting/analysis tools, such as Solarwind, Netscout InfiniStream, WireShark, NetFluke, ServOne etc.
• Familiarity with network tools to improve network infrastructure performance
• Experienced in network automation concept (NetDevOps) and tools (python, ansible, git)
• Working knowledge of ITIL framework related to Incident, Change, Request...

Qualifications Required:

• Degree in Business Information Technology/Information Technology/Computer & Communication Systems/Computer & Network Technology/Computer & Networking
• CCNP or the equivalent professional certificates
• Excellent spoken and written English skills.
• Experience of working in a multi-cultural, virtual team, across multiple geographical regions

• Regular team buildings
• 18 leave days / Year
• Insurance: GP, Life Insurance, Dental & Optical reimbursement
• Annual bonus
• Working hours: from 9am to 6pm, Monday to Friday
• E-learning and certifications paths

Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by physically performing the task of process control, equipment monitoring and in-process analysis to ensure the production process strictly follows company safety standards and environmental regulations and product quality is within customer's requirement.

Responsibilities:

• Support Shift Supervisor in handling plant start-up, shutdown manufacturing process according to established procedures
• Support production activities such as in-process quality testing, catalyst preparation, equipment preparation for maintenance, loading & unloading of process solvents
• Perform all routine task required to maintain manufacturing process such as monitor process parameters, plant patrolling, data logging and housekeeping
• Perform safe work practices through following safety regulations and supporting safety programs
• Ensure safe working conditions through taking corrective actions to maintain equipment and process condition within safe operating limits
• Perform company emergency response in areas of firefighting, rescue and loss containment
• Maintain plant safety equipment through routine checks
• Execute predictive maintenance to identify and prepare equipment for maintenance before breakdown
• Prepare or update standard operating procedures based on acquired experience and new technical know-how

Requirements:

• Diploma in Chemical Engineering or Chemical and Pharmaceutical Technology, NITEC in Chemical Process Technology or Higher NITEC in Chemical Technology or a related discipline with at least 4 years of relevant experience
• Knowledge in Distributed Control System is advantageous
• Effective team player with good communication skills and high self-motivation
• Able to perform rotating shift work
• Able to perform overtime work when required
• Willing to work in Jurong Island

1. To meet up with the Clients, developer, contractor and all the stakeholder.
2. To maintain good relationship with clients, developer, contractors and all the stakeholder.
3. To maintain Existing Clients and build up on the Expansion.
4. To fulfil the Clients, developer, contractor and stakeholder requesting on Estimate, quotation and Tendering.
and all the KPI requirements of the Contracts.
5. To have minimum 1 year or more experience in Building, Plumbing and Sanitary works.
6. To Standby 24/7 for urgent call and response to site if needed.
7. To prepare and submit weekly report to the Project Manager on the sale forecast and works updates.
8. To engage and Coordinate with Specialist and Sub Contractors.
9. To manage team of 10 members.
10. To have a Class 3 Driving Licenses preferably with own car.
11. To have knowledge in Building, Plumbing and Sanitary works COP.

Roles:

Process Technician will be part of the Operations Team responsible for ensuring Operations processes run smoothly as per production plan. The incumbent is expected to be proficient in troubleshooting and resolving operations and process issues.

Responsibilities:

• Manage safe start up and shutdown of process/unit
• Ensure routine tasks and operations checklists are completed as scheduled
• Issue and close safe work permits and ensure work activities are carried out safely
• Ensure proper handover and takeover during shift change
• Participate in Environment, Safety, Health and Compliance programs

Requirements:

• Diploma with background in chemical or mechanical
• At least 2 years’ of relevant experience in a manufacturing/polymer plant
• Those with Class 1 or Class 2 local boiler attendant certification are encouraged to apply
• Strong interpersonal skills
• Proficient in Microsoft Office
• Good team player, with strong self-initiative
• Experience in DCS operations and controls
• Supervisory skills is advantageous
• Willing to perform 12hour rotating shift work

Job Description:

• Configures and installs various network devices and services (e.g., routers, switches, firewalls, load balancers, VPN, QoS)
• Performs network maintenance and system upgrades including service packs, patches, hot fixes and security configurations
• Monitors performance and ensures system availability and reliability
• Monitors system resource utilization, trending, and capacity planning
• Provides Level-2/3 support and troubleshooting to resolve issues
• Works within established configuration and change management policies to ensure awareness, approval and success of changes
• Selects and implements security tools, policies, and procedures in conjunction with the company’s security team
• Liaises with vendors and other IT personnel for problem resolution

Requirements:

• Bachelor's degree in Computer Science or related disciplines
• At least 5-7 years of similar experience
• Proven hands-on network engineering experience
• Certified in CCNP or higher (CCIE and/or CISSP highly valued)
• Good understanding of networking protocols (e.g., IPSEC, HSRP, BGP, OSPF, 802.11, QoS)
• Good understanding of the OSI or TCP/IP model
• Hands-on experience with monitoring, network diagnostic and network analytics tools

Our Addresses and Working Hours:

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities:

• Responsible to provide Electrical & Instrument (E&I) support to maintenance and operations of the plant
• Maintenance strategy planning and implementation
• Predictive and preventive maintenance (PPM) planning
• Lead failure root cause analysis, analyze asset availability and drive improvement in E&I reliability
• Risk management which includes PPM strategy, equipment/parts obsolescence, spare optimization.

Job Requirements:

• Bachelors or Masters degree in Electrical & Instrumentation Engineering
• Candidate with 1 to 2 years of experience in a chemical industry/manufacturing environment will be an added advantage.

About the job

This role supports Store IT systems, service requests and IT incidents including IT hardware equipment, application systems and operations. This role works closely with store co-workers, super users, Service Office IT team and external IT vendors to ensure high availability, stability, and security of IT system to support store activities and operations.

Your assignment

• Perform day-to-day IT operations and support activities in the store to ensure that IT systems perform with high availability, performance, and security
• Investigate, trouble-shoot, follow up and communicate with store users on their IT support incidents and service requests with resolution, closure, work-around and escalation
• Perform Store IT support according to IT policies, standards, and SOPs
• Support IT audit, compliance, and security reviews and assessments
• Support implementation of local Store IT project activities within planned scope, schedule, and budgets
• Support Store super users in testing, training, implementation, and upgrade of Store IT systems including associated technical documentation
• Support and coordinate with Service Office IT in system security patches and anti-virus updates on Store IT systems on a needs basis
• Maintain inventory records of hardware, software license and support contracts
• Support IT hardware, software, license and subscription compliance through physical checks and tools (Service Desk and SCCM)
• Coordinate on-site work with authorised vendors during rebuild, relocations or repairs
• Support Service Office IT and Store BN in IT budget preparation and contract renewal of Store IT hardware, software licenses, application support, subscription & other IT services procurement with due diligence
• Support system & data backup, recovery procedures to ensure effective and timely recovery of business data & IT services in the event of an emergency or disaster situation
• Provide standby weekend & after office support if required or rostered

Your profile

Motivation:

• Passionate about IT solutions and trends in the retail industry
• Possesses teamwork and service-oriented mindset
• Strong sense of achievement in driving IT operational support

Knowledge:

• At least a Diploma in IT Professional disciplines (Computer / Information Technology)
• Minimum 3 years of experience in IT support role
• Practical knowledge to support super users, system support and testing
• Practical experience in IT support including Service Desk, System monitoring, Backup & restore, Patching & Malware protection
• IT Support experience of IT systems in retail environment (Microsoft Navision, LS Retail, POS, CRM, SQL Database)
• Working knowledge of IT infrastructure, network and security technologies (Windows Servers, Active Directory, Azure, VMWARE, EMC Storage, CISCO Routers, Switches & WLAN, Firewall, SCCM and Azure Cloud)
• Familiar with store operations, e-commerce and retail business processes

Capabilities:

• Install and configure computer hardware, operating systems, servers, storage, networks, printers, and applications
• Maintain, monitor, troubleshoot and support computer systems and networks including POS, Printers, Scanners, Wi-Fi, MGF devices, Desktops, Laptops and Tablets
• Resolve IT support issues and service requests in a structured and timely manner
• Excellent teamwork and establish good working relationship with users and service providers
• Customer service mind-set, self-starter, process improvement orientation
• Able to work under time pressure with problem solving, priority driven, and business focused approach
• A technical, logical thought process with strong communication skills and has a good command of English