About Our Client

• Logistics Freight Forwarding Solutions @ Kranji
• Normal Working Hours: Mon - Fri @ 8am - 5pm
• Basic + AWS + PB

Job Description

• Design and optimize packaging processes using Solidworks.
• Create technical drawings and packaging layouts compliant with ASTM standards.
• Improve production efficiency and reduce waste through process optimization.
• Collaborate with production, quality, and logistics teams to ensure smooth operations.
• Ensure packaging meets quality standards, including ASTM compliance, through testing and inspections.
• Troubleshoot process issues and provide technical support.

The Successful Applicant

• Min. NITEC/Diploma in Engineering or equivalent.
• With relevant experience or knowledge in packaging/ crating work preferred
• Understanding of ASTM international standards.
• Proficient use of Solidworks software.
• Able to manage multiple projects in a fast-paced environment with strong project management skills.

Reach out

Please submit your updated resume by using the APPLY NOW button

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to Kanry Search Singapore Pte Ltd’s PDPA and e2i’s PDPA.”

Kanry Search Singapore | 24C2261

Sarah Lau | R22110930

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Our client specializes in high-precision CNC machining and custom manufacturing. Due to business needs, they are now recruiting a Welding Process Engineer to be part of their Welding Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Welding Process Engineer:

• Design and create welding procedures, specifications, and jig fixtures.
• Perform TIG welding and have knowledge of orbital welding (preferred).
• Introduce and implement advanced welding technologies and techniques.
• Estimate costs, resources, and timelines for welding projects.
• Train welding personnel on techniques and safety protocols.
• Maintain comprehensive records of welding procedures, inspections, and certifications.
• Develop and uphold Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).

Requirements:

• Diploma in Mechanical Engineer
• Possess Certified Welder Inspector (CWI) is an added advantage
• 3 years of relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

• 5 days, Alexandra (South-West), walking distance from MRT
• $3200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• No experience can apply

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• 1 year of relevant experience as Process Engineer
• Candidate with no experience can apply as on-the-job training is provided
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

This role requires highly cross functional interactions with key site functions to ensure success in production and release performance. Individual must be able to effectively communicate and collaborate closely with the team members and various SME to ensure equipment are operational to sustain daily operations, resolve operation challenges and implement effective measures to address the challenges to ensure without compromising on safety and compliance.

Location: Tuas

Salary up to $10000

1 Year Contract

Design & Project Engineering:

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule.
• Lead F&E to participate in technical transfer activities and cross-functional meetings.
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints.
• Effectively manage and work with project CQV team to ensure timely delivery of projects.
• Prompt updates or escalation of issues and challenges
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment.
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design.
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo.
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications.
• Work with project managers to complete design and engineering projects within schedule, budget and quality constraints.
• Develop technical solutions to complex problems requiring the regular use of ingenuity and creativity.

Daily Operations

• Accountability and ownership of assigned equipment
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Effectively communicate and collaborate with cross function stakeholders to address operational challenges and concerns to ensure sustained operation and minimal interruptions to operations activities.
• Lead and participate in equipment breakdown investigations to identify root causes. Effectively communicate to the customers on the subsequent plans, short term, and long-term mitigating actions.
• Collaborate closely with cross functional SME to implement effective corrective, preventive action and improvements to eliminate or mitigate future recurrence.
• Ensure operation continuity through asset lifecycle management planning, assess and identify impact to safety, compliance, operational schedule and cost.
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state.
• Accountable for deviation/change control associated to process equipment performance.
• Responsible for investigation of deviations, development of corrective and preventive actions
• and implementation of change controls in a timely manner.
• Support equipment readiness initiatives for New Product Introduction or Product Campaign Changeover
• Responsible for operation and reliability of Biotechnology process equipment and/or single use systems assigned.
• Apply process equipment knowledge to perform troubleshooting of equipment failures/malfunctions and the development of technical assessments during normal working hours and after hours when required.
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo.
• Apply knowledge of Operational Excellence practices such as lean maintenance to drive continuous improvement.
• Responsible for completion of process equipment periodic review, data integrity assessment and security assessment in a timely manner
• Collect, organize, analyze and present results for operational issues or engineering projects of various scale and complexity.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

Transport Pick Up: Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun
Location: Tuas
Contract Duration: 1year
Salary: Up to 6K

Job Description:

• Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe / models.
• Carry out technical assessment for evaluation of processes
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensure the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians and fellow process engineers on the process and procedures as required.

Requirements

• Min Degree in Engineering, preferably in Chemical Engineering or Degree in Science with Major in Chemistry
• Has min 2 years of experience
• Demonstrated ability to provide technical solutions for complex problems through equipment and process understanding
• Working knowledge of Regulations, and Good Manufacturing Practices (GMP)
• Proactive, has experience with high performance teams, strong interpersonal and project management skills

If interested, please email your resume to [email protected]
➖
Alex Goh Hock Leong
(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Description:

• Create and maintain manufacturing instructions and procedures.
• Develop and troubleshoot process control recipes.
• Assess and evaluate manufacturing processes.
• Investigate quality and EHS issues.
• Implement preventive measures for processing problems.
• Ensure safety and quality standards are met.
• Identify and improve processes and equipment.
• Update plant personnel on process changes.
• Train technicians and engineers on procedures.
• Manage equipment/GMP systems and ensure compliance.

Salary: up to $6000 + 250 transport + 1.5m completion bonus

Working Days & Hours: Mon-Fri Office Hours

Location: Tuas (pickup from Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun)

Job Requirements:

• Degree in Chemical Engineering, Process Engineering, Pharmaceutical Engineering , or a related field.
• Relevant certifications in process engineering or pharmaceuticals may be advantageous.

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Job Responsibilities

• Manage Calibrated Tools & Equipment- Ensure availability and regular checks in accordance with SINGLAS accreditation.
• Able to validate & analyze the Calibration test report.
• Able to interpret Technical data like illustrated part drawings, wiring drawings ,CMM Service Bulletin , AD etc.
• Liaise with calibration vendors for coordinating pickup & deliveries and timely calibration services
• Liaise with OEM or Product Support Engineer on any related issue of the tools & equipment.
• Maintain and update documentation and data accurately, timely to comply with the requirements.

Job Requirements

• Diploma in Engineering field
• Knowledge of Aviation procedures & process will be advantage
• Self-motivated with a positive attitude
• Able to work under pressure and independently in a fast-paced environment
• Good interpersonal and communication skills
• Familiar with Microsoft Excel /Power Point / Words

• Basic Salary: $6,000 to $8,000 Basic + $1,000 Transport allowance + Mobile + Sales Commission

• Possess sales experience in SEMICONDUCTOR FRONT END PROCESS

Our client is a Europe MNC & a global leader of instrumentation equipment in the semiconductor & pharmaceutical industry.

Responsibilities:

• Manage & grow client base from MNC to SME
• Achieving or exceed sales & revenue targets
• Support, perform & coordinate instrument demo to clients
• Manage complex sales with ability to sell across different levels within accounts

Requirement:

• Diploma or Degree
• Sales experience in Semiconductor Front End process
• Proficient in Chinese to coordinator with Chinese speaking clients

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

Working Location: Ang Mo Kio

Working Hours: 8.30am-6.15am (Mon-Fri)

Responsibilities:

• Machine servicing, installation and training
• Lapping and polishing machine operation.

Requirements:

• Exp in Precision Engineering machine operation or machinery servicing
• Knowledge of Mitsubishi or Siemens PLC is added advantages

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to [email protected]

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion!

R22103985 | EA License 16C7883

Transport Pick Up: Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun

1. Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
2. Develop, maintain and troubleshoot the process control system recipe / models.
3. Carry out technical assessment for evaluation of processes
4. Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
5. Develop, implement and monitor robust preventive measures for processing issues.
6. Play a pro-active role in ensure the site safety and quality standards are adhered to.
7. Proactively monitor, identify, develop and implement improvements in processes and equipment.
8. Communicate on a regular basis to the plant personnel on process updates.
9. Train the process techincians and fellow process engineers on the process and procedures as required.
10. Own one or more multiple equipment / GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Qualification

• Min. degree in Engineering, preferably in Chemical Engineering or Degree in Science with Major in Chemistry
• Preferably, 2 – 3 years experience in a relevant manufacturing environment (pharmaceutical and new product introduction).

TELE me at @jacechooo or WA me at https://wa.me/+6582976283 NOW!
Interested candidates please submit your resume to [email protected]

Jace Choo Oi Kei
Personnel EA License No.: R1875164
Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Salary: up to $8000

Duration: 6 months

Working Days & Hours: Mon-Fri Office Hours

Location: Kranji

Job Description:

Support Site Manufacturing (Upstream/Downstream) Activities Through:

• Planning and executing activities required for process investigation such as performing process impact assessment, participating and performing root cause analysis. Work with cross functional teams for process issues investigation
• Analyzing process trends, monitoring process performance as part of the CPV program. Escalate and perform investigation in event of any out of trend or process issues
• Leading process investigations to identify root cause and implement action plans to correct or prevent re-occurrence
• Planning and executing process improvements and robustness projects
• Leading/supporting cycle development for process parameters where applicable
• Drafting process training slides and providing process training to cross functional teams
• Raising change controls as change owners for process changes
• Performing impact assessments for relevant change controls
• Providing technical /process parameters for creation and revision of master batch records. Review master batch records.

Lead/Support Technology Transfer for New Technologies/Product Introduction Through:

• Leading/Supporting the evaluation of new manufacturing technologies and/or equipment for process improvement or process capabilities build
• Planning and executing technical transfer activities according to project timelines. Raise change controls where applicable to support the technical transfer
• Monitoring process performance and trending through the site CPV program. Proactively investigate where required to ensure process robustness.
• Performing risk assessment, drafting required technical transfer and process control strategy documents and updating lifecycle documents
• Authoring study and process validation protocols and reports where needed

Others:

• Support audits, regulatory submissions and responses
• Support and execute global manufacturing sciences initiatives according to project timelines
• Responsibility to adhere to any applicable EHS requirements.
• Commitment to a fair and respectful relationship to others and behavior in accordance with Takeda’s Code of Conduct.
• Any other duties as assigned by supervisor.

Job Requirements: Min Degree in Biochemistry, Chemistry, Chemical Engineering, Biotechnology, Biochemical Engineering with minimum 3 - 4 years of relevant experience in pharmaceutical industry

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to optimize the spray drying processes for collagen and gelatine powder production, ensuring high-quality and consistent output.

Key Responsibilities

• Manage research project with Principal Investigator (PI), Co-PI and team members to ensure all project deliverables are met
• Participate in brainstorming and ideation, conduct research and experiments, create functional models, and maintain documentation of design development
• Develop system from embodiment of concept to detailed design of parts and assemblies, including selection of standard components, through application studies, analyses and calculations
• Organise procurement of required electrical and mechanical components as well as commercial devices
• Guide students to carry out assembly of submodules, integration of system and testing of machines
• Coordinate maintenance of associated equipment with POD technical officers when required
• Perform risk assessment, and ensure compliance with workplace safety and health regulations

Job Requirements

• Bachelor's degree or higher in mechanical engineering, or related field.
• Professional-level competency in mechanical system and part design
• Strong prototyping skills
• Proficiency in CAD software, such as SolidWorks or Creo Parametric
• Mechanical engineering degree
• Minimum design experience of 5 years

Key Competencies

• Show strong initiative and take ownership of work.
• Demonstrates expertise in experimental design and execution, with good analytical thinking and problem-solving skills.
• Able to build and maintain strong working relationships with people within and external to the university.
• Good communication and interpersonal skills.

· Coordinates all work related to Process Engineering deliverables on scheduled projects needed to meet the deadlines developed by Plant Capital Plan, New Product Introductions, and New Process Technology Developments.

· Responsible for manufacturing engineering support, the development of new process technologies, and the support of new product introductions/tech transfers.

· Organizes testing associated with the development of new process technologies and the support of new product introductions/tech transfers and works closely with the overall Tech Transfer team.

· Works closely with technical services to develop and confirm Critical and Key Process Parameters needed for Equipment and Process Validation. Develops and delivers presentations to communicate project timelines and milestone completions.

· Serve as the Subject Matter Expert for equipment and processes within area of responsibility and thereby serving as the SME for investigations, design reviews, equipment/process troubleshooting, Capital Project planning, change control and other related activities for the site.

· Able to work well in cross functional TEAMS, good communication and presentation skills, strong technical understanding, general automation knowledge, multi-tasking and time management

· Work effectively with others from diverse backgrounds and demonstrate capability to adapt to new, different, or changing requirements. Display strong moral principles and work ethics while demonstrating initiative. Maintain a professional presence and display responsible behaviours.

· Develops conceptual strategies, processing schemes, feasibility studies, PFD’s, and detailed scopes of work.

· Identify and execute projects to increase safety, reduce product cost, improve product quality, improve yield, and reduce material usage.

· Work on several different projects and be able to prioritize these projects.

· Assists in developing control strategy and instrument process design, including emergency and shutdown procedures, instrument specification sheets, control ranges, alarm points, and automation strategy.

· Authors, updates, reviews, and approves area procedures and master batch records to ensure correct content and compliance with Good Manufacturing Practices.

· Designs studies, executes experiments and perform data analysis.

· Writes study proposals, progress reports, development reports, and various technical memo’s.

· Evaluates new technologies to improve the commercial production process.

· Supports scale up activities from R&D to production.

· Provides miscellaneous overhead support of facility.

· Supports the assurance of a robust manufacturing process for the current registered process as experience is gained post launch.

· Sets up robust process for trouble shooting.

· Acts as an effective change agent.

· Acts as a key player for the expansion of projects as needed to increase scale of manufacture.

· Investigate deviations from standards of manufacturing process using effective root cause analysis tools. Recommending and implementing effective corrective and preventative actions.

· Generating, evaluating, and implementing innovative and creative solutions.

· Assist as subject matter expert for technical projects.

· Capable of generating a project scope and cost plan to effectively draft a capital request.

· Develops product and process knowledge in multiple process train areas.

· Contributes to equipment URS development and retrofit. Participates in equipment FAT’s, SAT’s, etc.

· Participate in Quality Risk Assessments and process hazards analysis activities.

Our requirements:

• Min Degree in Biomedical Sciences or related sciences
• Min of 2- 5 years’ experience in Process Engineer
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

If you are interested in the position, do kindly drop your most updated resume to [email protected] (Attn: Process Engineer)

Thank You.

Leon Leong De Cong

R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

ROLE SUMMARY

· The incumbent will be responsible for execution of the manufacturing process in a multi-product cGMP facility capable of manufacturing commercial, clinical and development stage biological products.

· The engineer/scientist in manufacturing operations is responsible for execution of the manufacturing process in a multi-product cGMP facility capable of manufacturing commercial, clinical and development stage gene therapy products. Additional roles include using operational and technical knowledge to lead troubleshooting activities, tech transfer and start-up activities, investigations, analyse process data, and identify and implement moderately complex process improvements.

ROLE RESPONSIBILITIES

· Leading relevant process activities including protein purification or cell culture operations (depending on the background of the candidate), solution formulation, and equipment preparation (set-up, CIP, SIP) by following established SOP’s.

· Leading the setup and evaluation of unit operations, executions, and changeover (daily and long-term)

· Troubleshooting of complex process disturbances, identifying resolution and implementing corrective and preventive measures, as require

· Real time assessment of process performance and predictive analysis with identification of course correction (if required).

· Individual will be required to perform process monitoring, data analysis, and data preparation for presentation in several forums including project team meetings.

· Serve as the operations point of contact for technology transfer and start-up of products by reviewing process parameter tables and approval of applicable documentation.

· Generate process overview presentations, sampling plans, and other tech transfer deliverables (if required).

· Capable of managing intra-departmental projects and performing relevant presentations with minimal supervision.

· Individual will provide subject matter expertise in supporting process and author product related investigations, execute CAPAs, and provide impact assessment of complex process and equipment change controls to ensure a robust and capable solution with minimal supervision.

· Individual will help to ensure the equipment and facilities are maintained in a GMP compliant state at all times.

· The individual will be responsible for leading within the department as well as other departments to plan, communicate, and coordinate activities.

· Individual will assist in leading the inventorying, tracking, maintenance scheduling, and troubleshooting of mechanical equipment.

· Individual will be responsible for authoring and/or approving job-related documentation.

· Individual will drive the evaluation and assist in the implementation of new technology for process execution and/or analysis.

· Individual will be expected to participate and drive in continuous improvement and innovation initiatives. Individual is expected to be a coach.

· Individuals are responsible to ensure a safe work environment and to lead job hazard analysis and qualitative risk assessments.

· Individuals will be required to develop the multi-tasking skills of peers.

· Escalates and remediates with various levels of management when there is a risk to operations, personal safety, equipment functionality, product supply and/or to quality/compliance.

· Individual should be involved in mentoring junior level scientists/engineers.

Our requirements:

• Min Degree in Biomedical Sciences or related sciences
• Min of 10 years’ experience in Process Engineer
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

If you are interested in the position, do kindly drop your most updated resume to [email protected] (Attn: Process Engineer)

Thank You.

Leon Leong De Cong

R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

YOUR ROLE

The Regional Procurement role is designed to drive the development, implementation, and continuous improvement of procurement and PTP (Procure-to-Pay) processes across the region. This role ensures alignment with global policies, processes and standards, while adapting to regional specifics and regulations. The person will lead & coordinate transformation initiatives, support operational excellence, and facilitate the deployment of effective procurement solutions within the region. By creating strong relationships with key stakeholders, providing subject matter expertise, and monitoring performance metrics, this role aims to enhance the efficiency, effectiveness, and overall success of procurement and PTP activities within the region

WHAT ARE YOU GOING TO DO?

Projects / Solution development

Support the development of regional procurement and PTP projects/solutions (e.g., global/regional policies, processes, and tools) by:

• Adapting Global Projects: Mapping global projects/solutions to regional circumstances and regulations, identifying necessary exceptions/modifications to ensure proper integration within the region.
• Defining Transformation Roadmaps: Creating detailed plans for transitioning countries to new solutions.
• Subject Matter Expertise: Acting as an SME for project stakeholders, identifying gaps, and providing solutions/workarounds for existing and new processes, systems, and tool implementations

Projects / Solution deployment

Support the deployment of regional procurement and PTP projects/solutions by:

• Documentation and Progress Tracking: Developing and maintaining project/process documentation (including translations if needed), managing, and tracking procurement project progress.
• Training and Coordination: Providing training and coordinating activities within countries to ensure the successful embedding of new solutions.
• Communication Cascade: Disseminating global procurement and PTP communications to the countries.

Run & Maintain

Support ongoing procurement and PTP operations within the region by:

• Document Management: Timely and accurate updating of operational documents (e.g., approval matrices) essential for effective procurement and PTP processes.
• Process Assessment and Improvement: Conducting process assessments, quantifying the impact of process pain points through data analysis, and defining improvement projects.
• KPI Monitoring: Monitoring regional KPIs and initiating improvement projects/actions when scores fall below target (e.g., Supplier Data Quality Index - DQI).
• Training and Knowledge Management: Identifying knowledge gaps in procurement and PTP operating models, preparing and conducting training sessions with stakeholders to address these gaps.
• Improvement: Identifying areas of improvement at regional and implement defined action plans
• Stakeholder Engagement: Developing and maintaining strong relationships with key stakeholders within procurement, PTP, and other functions to enhance the efficiency and effectiveness of people, processes, and tools

WHAT ARE WE LOOKING FOR?

Education & Qualifications

• University Degree or equivalent qualification

Experience

• At least 3 years of relevant procurement process and project management experience; knowledge of continuous improvement and change/project management concepts. Proven experience in developing/ deploying/ improving Procurement processes, policies, systems, and tools.

Specialist Knowledge & Skills

• MS Office incl. Visio; experience and working knowledge of project management tools; sound knowledge of process design, drafting, and documentation.

WHAT DO WE HAVE TO OFFER?

With a genuine culture of reward and recognition, we want our employees to grow, develop and be part of our journey. There’s no doubt that you will be compensated for your hard work and commitment so if you’d like to work for one of the top Logistics providers in the world then please do get in touch to find your next role.

ABOUT TOMORROW

We value your professional and personal growth. That’s why we share plenty of career opportunities for you to thrive within CEVA. Join CEVA for a challenging career.

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. With a minimum of 7 years relevant industrial work experience

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

COMPANY DESCRIPTION

Red Shield Industries (RSI) is the social enterprise arm of The Salvation Army. By re-using, recycling and restoring donations in kind from the public and corporations, it generates income through its Family Stores to support our mission to provide holistic care to the community.

RSI also strives to assist humanitarian needs in times of crisis and emergency, leveraging on its logistics network to deliever aid to crisis areas in the region quickly and efficiently.

Working closely with local and international organisations, RSI engages them in meaningful programmes for their coprate social responsibility initiatives.

https://www.salvationarmy.org/singapore/red_shield_industries

RESPONSIBILITIES

About The Job

The Process Worker supports the mission of the Red Shield Industries, a social enterprise, highly regarded by public for its excellent delivery donation in kind service which is sensitive and responsive to the community welfare needs and meeting the funding needs of The Salvation Army. It is expected that as a process worker, the job incumbent will sort and distribute donated items according to the guidelines set up to maximize the revenue for The Salvation Army's work.

Key Responsibilities

• Check and process all clothing/toys/bric-a-brac/books/glassware/etc collected are classified as per standard operation procedures
• Ensure items are sorted categorically and distributed efficiently to warehouse for on forwarding to the retail stores.
• Support the execution of the planning and smooth operation of the sorting system and packaging before sending to the warehouse for distribution to the various stores.
• Surrender unclaimed monies or valuables to supervisor who will bring to the attention of the Processing Centre Management.

• Secondary Education
• Physically fit (able to lift 10 to 20 kg of goods)
• Able to stand for long period (4 hours)
• Able to work in non-aircondition environment

Working Hours

• 44 working hours
• Monday to Sunday: 8.30am to 6pm (inclusive 1.5-hours break)

Work Location

The Salvation Army Singapore Red Shield Industries

356 Tanglin Road Singapore 247674

• 5 days, Alexandra (South-West), walking distance from MRT
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Suppor current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time
• studies

Interested applicants, please send your resume to [email protected]

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.