• MNC (Woodlands)
• Company Transport Provided
• Basic: $1800 to $2500 + AWS + VB (3 to 4 months)
• Excellent Benefits + Career Progression
• Training Provided for candidate without or with lesser experience

Job Responsibilities:

• General maintenance, equipment repair and overhaul plant equipment / instrument.
• Carry out minor fabrication work (piping, support system, vessel, electrical supply, lighting system).
• Maintain good housekeeping and 5S in the work area.
• Assist in plant troubleshooting job.
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.
• Operate processes in accordance to operating procedures, process safety information (where applicable) and safe work practices.
• Participate in relevant safety and health programs, trainings and initiatives.
• Report on safety and health incidents and accidents.
• Any assigned ad-hop task/s.

Requirements:

• Preferably 2 to 3 years’ experience in a process manufacturing environment.
• Basic Education Requirements: Minimum NTC-3 in Welding/Maintenance Fitting or Electrical fitting and Installation or other relevant technical certificate.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

This role is responsible for one of the front-end process modules in Office Printhead or PageWide Printbar manufacturing lines and required to apply subject matter knowledge to drive technical and operational excellence in the manufacturing processes. Expected also to work on problems of diverse complexity and scope.

May participate in project team activities and facilitates information validation and team decision making process. Exercises independent judgment within generally defined policies and practices to identify and select a solution. Ability to handle most unique situations. May seek advice in order to make decisions on complex business issues.

Responsibilities

• Designs engineering solutions, including methods, operation sequences, and processes for the manufacturing of parts, component sub- assemblies, and final assemblies, based on established engineering principles and in accordance with general specifications and requirements.
• Lead issue diagnosis and problem-solving, using a systematic problem solving approach.
• Work in a project team of other manufacturing engineers and internal and outsourced manufacturing partners to develop and execute reliable, cost effective and high quality manufacturing solutions for moderately-complex products from new- product introduction through end of lifecycle.
• Delivers professionally written reports, and supports realization of operational and strategic plans.
• Collaborates and communicates with management, internal and external partners in outsourced manufacturing or development r regarding process and standards compliance, recording and reporting issues, and recommendations for problem resolution for manufacture of existing products.
• Represents the manufacturing engineering team for all phases of larger and more- complex development and manufacturing projects.

Education & Experience Recommended
• Bachelor’s or Master’s degree in Manufacturing engineering, Mechanical Engineering, or any other manufacturing related discipline
• Typically has 2-4 years of work experience, preferably in product/process engineering, or a related field or an advanced degree with 0-2 years of work experience.

Knowledge & Skills

• Using engineering tools and software packages to design and automate manufacturing processes.
• Strong analytical and problem-solving skills.
• Competent in adopting manufacturing methodologies such as Lean Manufacturing, Continuous Improvement etc.
• Understanding of material properties and hardware and electrical component design.
• Using empirical analysis, modeling and methodologies to validate manufacturing process and tooling design and specifications.
• Proficient in English. Good written and verbal communication skills.
• Ability to effectively communicate ideas to stakeholders
• Competency in Industry 4.0 technologies/Digitalization/Data Analytics is a plus.

Impact & Scope
• Impacts immediate team and acts as an informed team member providing analysis of information and limited project direction input.

Complexity
• Responds to routine issues within established guidelines.

Disclaimer
• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our PHOTO Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

• Business Process Documentation: Determine and document current business processes to identify and understand user needs effectively.
• Root Cause Analysis: Collect and analyze data to identify the root causes of organizational problems.
• Operational Process Improvements: Plan and implement operational process improvements to enhance information systems and product quality.
• Metrics Development: Develop and monitor metrics for process management and identify opportunities for future improvements.
• Functional Requirements and Solution Design: Translate the organization’s business objectives into functional requirements and solution designs.
• Stakeholder Collaboration: Partner with key stakeholders to implement re-engineering practices that align with organizational goals and objectives.

Experience and Skills Required

• Educational Qualifications:Bachelor’s degree in Business Administration, Engineering, Management, or a related field (preferred).
  
• Technical and Domain Expertise:Proficiency in business process modeling, process design, requirements management, and project management.
  Experience with business re-engineering methods, techniques, and the technology industry.
  Familiarity with applying Agile techniques to prioritize and define requirements iteratively.
  
• Certifications:Formal training in LEAN and Six Sigma (advantageous).
  
• Communication Skills:Strong written and verbal communication abilities to engage effectively with stakeholders and teams.
  

Responsibilities:

Carry out activities to addresss & resolve Non-Quality Events (NQEs)

Monitors & carry out activities to resolve NQEs at various product / production lines

• Monitors & records NQEs from the production line
• Reviews, analyses & validates NQE contents
• Executes immediate containment actions for NQE e.g., hold lot in Manufacturing Execution System (MES), etc.
• Prepares and consolidates quality issue review topics (to share on the progress of follow ups on NQEs / MRBs) prior to daily meeting with Yield Dept
• Prepares information package required for MRB (e.g. event chronology, preliminary investigation and analysis results, etc.); Facilitates MRB meetings
• Records, follow ups and reports Quality Engineering activities (e.g. NQE, MRB, etc.) on Quality Activities Tracker
• Issues & drives 8Ds for NQE issues

Monitor product thru Quality Gate

Applies Quality Gate (QG)

• Monitors & records QGs results from the production line
• Performs lab analysis (e.g., SEM / EDX) on QG failed parts
• Participates in task forces (defect analysis, risk assessments)

Following the detection of QG failed lots, proposes short-term actions to ensure integrity of the quality of products and / or processes (i.e., equipment shutdown, etc.)

Others

Data Analysis: Pulls, plots capability & trend and analyses data from JMP & Klarity

Reports: Updates & presents various Quality Engineering reports & KPIs

Others: Performs audits and other tasks as may be assigned

Requirements:

Educational Qualifications :

Diploma – Minimum 2 years of relevant experience in a manufacturing environment

Higher NITEC – Minimum 3 years relevant experience

NITEC – Minimum 6 years relevant experience

Technical / job knowledge :

• Knowledge in Quality tools and methods (SPC/MSA/FMEA, Problem-Solving & Audit skills) is an advantage
• Knowedge in statistical tools (e.g. JMP, Klarity, etc.) is an added advantage
• Knowledge and skills in lab (SEM/EDX, etc.) is an added advantage
• Knowledge of semiconductor products & manufacturing processes

Personal capabilities :

• Meticulous and with a sense of initiative, responsibility & urgency
• Team player with positive attitude and willingness to learn

Others :

• Able to work on normal swing shift (Sunday - Thurs), 8.30am to 6pm

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Position: Senior Software Engineer
Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$6,500 – $8,000

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Scope:

Software Development

• Design, Develop and Maintain device drivers for Windows Operating Systems
• Undertake WHQL testing and certification of drivers and device frameworks.
• Design, Develop and Maintain User Libraries and DLLs.
• Participate in all phases of SDLC and prepare corresponding documentation
• Undertake porting and maintenance of existing drivers to new frameworks and OS’s
• Resolve defects reported by internal and external customers
• Collaborate with USB host & device firmware development teams.

Job Requirement:

• Degree/Master’s in computer science/Engineering or related field.
• 5 years or above experience in the area of device drivers development, preferably USB
• In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs
• Excellent C Programming Skills.
• Professional attitude to work and meticulous in coding and testing
• Must have participated and experienced in SQA processes.

Job description:

· Responsible for organizing, supervising, and directing project construction activities to successfully meet project specifications and schedules as Contractor’s principal representative to Owner at the jobsite.

· Forms preliminary construction plans including organization, staffing, and administration, subject to review by the Project Manager.

· Studies specifications to plan construction procedures; monitors procurement of equipment and materials to be delivered to conform to work schedules.

· Finalizes assignment of field construction personnel and mobilization plan of manpower; assembles members of organization at the start of the project.

· Authorizes work and services to be purchased from outside sources or subcontracted at the jobsite in accordance with construction policy and project economics.

· Confers with or directs supervisory personnel and subcontractors engaged in planning and executing work procedures, interpreting specifications, and coordinating various phases of construction to prevent delays.

· Authorizes the field construction schedule and field construction procedures to ensure good workmanship, safe construction, and on-schedule performance.

· Acts as liaison between Contractor and Owner’s representatives in the interpretation of specifications.

· Receives from subordinates’ reports on progress, materials, manpower, and costs, and directs the work schedule.

· Inspects work in progress to ensure that workmanship conforms to specifications. Develops new construction methods to satisfy unusual circumstances and changes from the original plan.

· Approves jobsite expenditures for labor and services by reviewing cost records, workmanship, material quality and quantity, scheduling, and procurement.

· Approves Safety procedures for all site workers to abide.

Requirements:-

• Diploma or Degree holder in Engineering field
• 3 years’ experience least in oil & gas, chemical construction industry
• Experience in executing construction in process/petrochemical plants and storage terminals
• Degree holder in relevant major
• Independent, resourceful, diligent and good team player.
• Able to lead supervisors & workers to comply, fulfil projects requirements, meeting schedules.
• Expected to perform hands-on duties with acquired skills and knowledge.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

• Analyze drawings to assess product characteristics, special handling needs, and determine appropriate packaging and crating requirements.
• Manage multiple projects effectively with minimal guidance or supervision.
• Identify opportunities for packaging improvements and implement solutions.
• Provide support for on-site packing activities as needed.
• Perform other ad-hoc tasks as assigned.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

• MNC (Woodlands)
• Company Transport Provided
• Basic: $1700 to $2100 + AWS + VB (3 to 4 months)
• Excellent Benefits + Career Progression
• Training Provided for candidate without or with lesser experience

Job Responsibilities:

• General maintenance, equipment repair and overhaul plant equipment / instrument.
• Carry out minor fabrication work (piping, support system, vessel, electrical supply, lighting system).
• Maintain good housekeeping and 5S in the work area.
• Assist in plant troubleshooting job.
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.
• Operate processes in accordance to operating procedures, process safety information (where applicable) and safe work practices.
• Participate in relevant safety and health programs, trainings and initiatives.
• Report on safety and health incidents and accidents.
• Any assigned ad-hop task/s.

Requirements:

• Preferably 2 to 3 years’ experience in a process manufacturing environment.
• Basic Education Requirements: Minimum NTC-3 in Welding/Maintenance Fitting or Electrical fitting and Installation or other relevant technical certificate.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Developing and optimizing processes, including production flow, assembly methods, and equipment
• Ensuring efficient and profitable manufacturing processes
• Carrying out risk assessments of all equipment and processes
• Writing reports based on data collected and presenting findings to higher-ups
• Coordinating manufacturing launch of new or revised products
• Help with change control, test script writing

Requirements:

• Min Degree in related study
• 1-2years experience in Pharma engineering

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Esther Lim Suk Hui

EA Personnel No: R18728082

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Responsibilities

• Lead and manage a team of RPA developers and analysts to delivery end-to-end automation
• Analyse business processes and identify opportunities for automation
• Design, develop, test, deploy and maintain RPA solutions according to best practices
• Work closely with stakeholders to understand their needs and ensure successful project delivery
• Contribute to the governance and best practices of RPA engagements within the Center of Excellence (COE)
• Liaise with cross-functional teams, such as cyber security, Active Directory (AD), AWS etc. to address any roadblocks and ensure smooth project execution
• Train and mentor business users on RPA capabilities
• Manage client relationships and demonstrate the value of automation through workshops and demos
• Create and maintain project documentation, including process design documentations (PDDs), solution design documents (SDDs), and technical design documents (TDDs)
• Continuously improve RPA processes for increased efficiency and scalability

Requirements

• Degree holder
• At least 5 consecutive years in roles of similar capacity
• Good technical writing skills
• Familiar with incident, problem and change management processes
• An eye for automation opportunities
• Passionate about mentoring team

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Job scope:

• Monitor, analyze and make decisions on how to address MTBE (Metrology and Backend) tools that are out of control for established SPC rules for both process and defect related issues.
• Use SOP to dispose of products that were out of control for established SPC rules for both process and defect related issues.
• Perform daily compilation of presentation materials on daily process and tools issues and present in Passdown meeting
• Carry out and complete process engineering tasks assigned by process engineers which directly contributed to process improvement and flexibility improvement.
• Required to perform basic metrology tool tuning.
• May be required to perform equipment recipe creation.
• Take the initiative to assume added responsibilities.

Requirements:

• Working hours: 8.30am to 6pm (Mon to Fri)
• Understanding of SPC and its applications in semiconductor equipment and processes.
• Direct experience in metrology (Defectivity/Thickness/Geometry), Sorting and packaging, and Characterization lab are plus points.
• Excellent verbal and written communication, good PC skills, presentation skills and strong data collection and analysis skills.
• Willing to work any shift and that you be a behavioral example by being a proactive problem solver, communicating openly, and taking responsibility.
• Possess good teamwork, multi-tasking capabilities and project leading skills.
• Self-motivated
• Ability to troubleshoot problems and address root causes
• Team oriented with a strong focus on effective team dynamics

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Work with both R&D and Operation Managers to kick off improvement projects that aims at cost reduction, yield improvement, Human Resource Management (work along with HR), etc.
• Implement Lean manufacturing principles and best practices to drive process improvements across all production lines
• Develop Production standard procedure or Work Instructions and align these documents with quality management systems requirements
• Prepare and conduct training for Operation teams to ensure up-to-date compliances are practiced consistently
• Identify opportunities for process optimization and implement strategies to improve productivity and efficiency
• Collaborate with the R&D team to introduce new technologies and innovations to our manufacturing process
• Report monthly CI & other assigned KPI performance
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s Degree in Mechanical/Industrial Engineering, with minimum 1 year working experience in manufacturing environment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Primary Purpose:

To implement process commissioning, warranty support and customer training and as well work closely with Customer Service Team and ensure that OIPT new installed tool can meet PA specifications well and be fully functional and available for customer use. Also, to involve regular extensive travel across Japan and Asia areas.

Key Responsibilities:

1. Process Commissioning: Follow SOP to implement process commissioning works and continuously improve SOP to shorten days to acceptance time.

2. Process Acceptance: Make a process summary report after process commissioning work is completed and assist to negotiation tool acceptance sign off.

3. Warranty Process Support and Training: Support warranty process issues troubleshooting to meet the requirements of Research/mass production customers and offer and promote process training to the customers.

4. Lateral Support: Assist to collect Research/mass production tools performance, e.g. MTBC/MWBC, uptime, thru-put, yield performance to support the tools sales and CIP upgrades.

Join one of the world’s leading energy solutions providers and discover how you can grow with Yinson no matter where you are in your career.

Yinson is passionate about meeting the world’s energy demands in a sustainable way. To achieve this, we believe in attracting great employees through the creation of a vibrant, progressive workplace that puts people first. We’re always on the lookout for experienced and passionate individuals to be part of the team, working and collaborating effectively to make a difference and create impact with individuals, corporations, governments and the business world.

So what are you waiting for? Join us now!

Who are we?

Yinson is a world leading energy solutions provider. Our business consists of Offshore production, Renewables, Offshore Marine and Green Technology. We have offices and operations in various countries around the world and thus offer a culturally diverse, international environment. We are now hiring in preparation for further growth.

This role requires good organizational/coordination skills and management of a small team of process engineers. Direct contact with the client and vendors will be necessary. The principle role of the Lead Process Engineer is to:

• Assist to plan, define, award and manage various Engineering Contractor’s technical deliverables for both basic engineering and detailed design.
• Assist to plan, define and award and manage Package Vendor’s technical deliverables and equipment delivery.
• Manage the closeout of HAZOP actions.
• Ensure compliance with Client basis of design and corporate specifications.
• Prepare, interface with client and maintain a deviation request list with regards to all Client specifications.
• Prepare project-specific discipline-related technical specifications and drawings with regards to all Client, Company and Classification Society requirements.
• Ensure that all contractors and vendors meet the contractual, Classification Society and technical requirements related to process engineering discipline.
• Responsible for providing support towards development and consolidation of multi-discipline engineering registers/lists.
• Assist in interface engineering registers, P&IDs, calculations and drawings.
• Ensure compliance with Safety Studies recommendations and best practices.
• Own, manage and coordinate for all aspects related to the Process Simulation.
• Assist trouble-shooting during construction, mechanical completion, pre-commissioning and commissioning, through to start-up, and including during operating regime.
• Travel as required, including but not limited to shipyards in SE Asia region, China, Middle East region, other Yinson Offices (Oslo, Malaysia), candidate vessels (onshore/offshore), operational production units (offshore) and onshore support bases.

Key Duties and Responsibities:

• Perform as Technical Authority for Process Discipline Engineering.
• Ensure that costs to Yinson are minimized and that project schedule is maintained.
• Manage the EPC Contractors, Engineering Contractors and Equipment Vendors. Follow-up and monitor Contractor schedule and progress and ensure any deviation is mitigated by corrective action coordinated with YP team.
• Interact with Client as required.
• Identify and ensure execution of the process engineering scope of work in accordance with the legal obligations, contract terms, scope of work, technical requirements and company policy.
• Interact with and support the engineering contractors as required (including Marine Engineering, Topsides Module Engineering, Integration Engineering, etc.) and equipment/package vendors.
• Achieving resolution of multi-discipline equipment problems by coordinating with other discipline engineers and project engineering management team.
• Update job knowledge by tracking and understanding emerging methodology improvements; and absorbing new practices from clients and partners.
• Engineering problem solving and troubleshooting, even when not directly in own discipline (taking a holistic approach to the project).
• Coordinate discipline issues between client, contractors, vendors and other relevant parties.
• Provide input to weekly/monthly progress reporting and other relevant status information as needed.
• Participate in audits and review processes as necessary
• Interact with non-technical disciplines as required (document control, cost control, planning).
• Other tasks as requested by the Engineering Manager.
• Attend ICSS FAT, OFE Package FATs, and witness Performance Test as required.
• QHSSE Duties – every employee shall:

o Take care of themselves and others who may be affected by their acts or oversights;

o Not interfere with or misuse anything supplied for their health, safety and welfare;

o Report quality related problems and HSSE hazards or deficits within their area to the QHSSE department;

o Promote and take part in the QHSSE continuous improvement process.

Requirements:

• Degree qualified in a technical subject (Chemical Engineering).
• Good use of Word, Excel & PowerPoint.
• Proficient in HYSYS simulation.
• Able to write Technical Reports.
• Experience in execution of FPSO projects.
• Experienced in Oil & Gas Process Engineering (15-years).
• Previous Lead Role for engineering contractor.
• Proven experience of reviewing & commenting on deliverables from contractors.

Responsibilities

• Review engineering deliverables from detailed engineering consultant / equipment vendors to ensure to meet client specifications
• Coordination with detailed engineering consultant or design, client, vendors, sub-contractors and third party specialists
• Monitoring, reporting ad driving engineering process
• Conducting and attend P&ID design review, HAZOP (Hazard and operability study), SIL (Safety integrity level) and 3D model reviews.
• Monitor and drive the closing out of punch lists after design review / HAZOP (Hazard and operability study).
• Supporting procurement team on technical issue with vendors, Construction team during construction phase on site checks and commission team during plant or sub system start-up.
• Function assigned by Department managers.

Requirements

• Bachelor Degree in Chemical engineering or related disciplines
• Experience in Marine/Oil & Gas will be an added advantage
• Knowledge in HYSYS, SmartPlant P&ID
• Able to handle work under tight schedule
• Good sense of Contractual Knowledge

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin