Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Responsibilities:

• Advanced low-power physical design/integration flow development.
• Full-chip floor planning and place & route.
• Power network design and analysis.
• Support signoff timing closure, power integrity, and signal integrity.
• Physical Verification using DRC, LVS.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power physical design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Key Responsibilities:

• Drive the overall Company’s Quality Assurance and Quality Control functions and programmes.
• Support the Project Management and QAQC teams in the development and implementation of Project Quality Plans (PQP)/CONQUAS/Quality Mark/Quality Management plans to achieve and maintain the highest level of Quality Standards.
• Ensure strict compliance with various Contractual QAQC Requirements conforming to Project requirements.
• Oversee the renewal audits & surveillance certification audits of existing ISO 9001 certifications to the latest versions.
• Act as main liaison party with external certifying body on all ISO certifications related to Quality.
• Oversee the continuous operations of the In house Academy with HR department to upskill and train all employees internally through in-house courses/training
• Conduct site-based Quality-related training to promote quality culture, better knowledge and awareness among project site staff.

Qualifications:

• Possess a recognized Engineering Degree with certification preferably BCA CONQUAS / QM manager certification and if having as Internal ISO 9001 Auditor certification is a plus point.
• At least 3 years' experience as a QA / QC role.
• Experienced in BCA CONQUAS / Quality Mark assessments is preferred
• Possess good communication skills and positive working attitude

JOB DESCRIPTION

We are looking for a Senior Software Development Engineer who will be responsible for developing high-quality software solutions that meet business needs.

Your work will be pivotal in shaping the technical direction of the projects you are involved in and in mentoring junior team members to improve their skills.

You will work directly with the product head, who you will assist as his lead to manage the software design and development of all the product develop by the company or our contract manufacturer.

JOB SCOPE

Software Design and Development:

• Lead the design and implementation of complex software features or systems.
• Write clean, efficient, and maintainable code in programming languages such as C#, C++, Python, or others as appropriate.
• Apply design patterns, algorithms, and best practices to build robust, scalable systems.

Code Review and Mentorship:

• Review code contributions from other developers, ensuring high code quality and best practices.
• Mentor and guide junior engineers, helping them grow technically and professionally.

Collaboration and Problem Solving:

• Work closely with product managers, designers, and other teams to understand user requirements and translate them into technical solutions.
• Troubleshoot complex issues across the software stack and work on performance optimization.

Architecture and Technical Leadership:

• Contribute to the technical architecture of systems, ensuring scalability, security and maintainability.
• Take ownership of major system components, driving their development from inception to production.
• Ensure the codebase follows industry standards and best practices for security, performance, and reliability.

Testing and Quality Assurance:

• Develop unit tests, integration tests and other automated testing procedures to ensure software quality.
• Participate in continuous integration and continuous delivery (CI/CD) processes.

Innovation and Continuous Improvement:

• Stay up-to-date with the latest technology trends, frameworks, and development tools.
• Propose new ideas and techniques to improve software development processes and product quality.

Documentation:

• Document software design, implementation details, and testing procedures.
• Create and maintain technical documentation for internal and external use.

QUALIFICATIONS

Technical Skills:

• Proficient in one or more programming languages such as Java, Python, C++, C#, or JavaScript.
• Solid understanding of software development methodologies (Agile, Scrum, etc.).
• Strong experience in object-oriented design and design patterns.
• Knowledge of databases (SQL, NoSQL) and data modeling.
• Familiarity with cloud platforms (AWS, Azure, Google Cloud) and containerization technologies (Docker, Kubernetes).
• Experience with version control systems like Git.
• Experience with performance tuning and optimization of software systems.

Experience:

• 5+ years of experience in software development.
• Proven track record of delivering high-quality software systems.
• Experience in leading or mentoring teams of software developers.
• Knowledge of full software development lifecycle (SDLC).

Soft Skills:

• Excellent communication skills, both written and verbal.
• Strong analytical and problem-solving skills.
• Ability to work effectively in a fast-paced, collaborative environment.
• Leadership skills with the ability to make decisions and drive technical direction.

Preferred Qualifications:

• Experience in working with microservices and distributed systems.
• Familiarity with DevOps practices and CI/CD pipelines.
• Experience with automated testing frameworks and tools (JUnit, Selenium, etc.).
• Knowledge of Agile methodologies and experience working in Scrum teams.

Responsibilities:

- Repairing, inspection, commissioning/installation of steam-and gas turbines and rotary machineries for ships and power generation. Cryogenic equipment services. Bulk material handling.

- Automation service and calibration. Control system service/trouble shooting (PLC). Boiler auto-combustion control and auto feed water control and burner overhauling.

- Willingness to work hands-on in marine, oil & gas industrial environment and work overtime (will be paid).

- Able to travel overseas (paid allowance) at short notice.

Requirements:

- Higher Nitec/Diploma/Degree or equivalent in Mechanical Engineering, Marine Engineering, Automation & Instrumentation/Mechatronics.

- With or without experience in related industry or sea-going experience.

- Good communication skills at all levels, from workers to Chief Engineer/Supt.

- Good command of English to write Service report and able to speak Mandarin with overseas clients.

- Working hours: 5 day/week 0800-1700 hours.

Interested candidates, able to speak English & Mandarin a must to liaise with overseas clients. Also written Service Report in English.

Please email resume with photo to [email protected]

Responsibilities:

· Pre and post technical support to customer on vision

· Provide technical support to customer

· Provide on-site service

· Evaluate and qualify knew products

Requirements:

· Degree or Diploma in Electrical / Optics Engineer

· 3 to 5 years of experience on machine vision application

· Good understanding on camera / lens / optical

a. Conduct feasibility study to develop basic and detailed engineering designs.

b. Manage budget and resources to ensure timely project completion.

c. Manage project to ensure compliance with legal and safety requirements.

d. Motivate team members and develop their skills.

e. Oversee workplace safety to ensure work is performed according to workplace safety procedures.

f. Minimum 2 years experience in Building Construction works.

You will be at the core team of Delta Research Center leading disruptive technological advancement with strong business value that empower company’s new business in intelligence machines, robotics and automation. As a research engineer, you will collaborate with technical experts to develop state-of-the-art mobile robot products / solution. You will play a key role in continuously improving existing and new products /technology, as well as be part of a dynamic and growing ecosystem in this field. You will manage and execute research programs and projects – particularly in the domain of robotic manipulation that develop and deliver impactful research and business outcomes.

Key Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Integration, testing and validation of R&D outputs into AMR platforms
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including own products
• Providing hands-on on-site support for software development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable software packages
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Job Requirements:

• Degree/Masters in Electronics, Computing, Mechatronics Engineering or equivalent
• Candidates with 3-4 years relevant experience in robotics research, integration, and development will be considered for a senior position
• Passionate in robotic navigation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in programming languages such as Python and C++, and/or other languages
• Proficient in robot programming using Robot Operating System (ROS) and Linux environment
• Proficient in software development in a collaborative environment using CI/CD tools
• Experience in one or more of the following domains will be preferred: Localisation, Mapping, Navigation, Machine Vision, Path Planning, Motion Planning, and/or Mission Planning
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

• To develop, document and support the build of high precision plastic injection tooling and molded parts for manufacturing.

• Support Program team during upfront new project quotation stage by providing accurate upfront tooling/product DFM that matches the right quality requirements.

• To meet customer for DFM and mold concept review to ensure customer’s technical requirements and concerns are addressed.

• Support Tooling Department by conducting internal tooling design and DFM reviews before tool launch.

• Support Production in areas like molding process optimization, implement manufacturing fixtures and automation for reliability and efficiency improvements.

• Support Quality Team in the design and fabrication of test/measurement fixtures.

• To coordinate mold trials, tooling and molded part troubleshooting and carry out necessary engineering changes to ensure parts can be produced smoothly with the required quality.

Your areas of knowledge and expertise that matter most for this role:

• Excellent technical analytical ability with strong interest for problem solving.

• Self-motivated team player with good interpersonal and communication skills.

• Past working experience or knowledge of Precision Tooling Design/Fabrication, Micro Plastic Injection Molding Process or Manufacturing Process Engineering related field preferred.

• 3D CAD software skill for Siemens UG NX or PTC Creo 4.0 and above

*Please note that Cyrus is in the process of relocating its office to Loyang by Q4 2024.

• Assist project manager in planning and execution of project plans at the construction site,
• Execute project plan and ensure works are completed as per the schedule and in accordance with contract specification and design drawing.
• Ensure the construction site fulfills the authority's code of practice and complies with house safety rules & regulations.
• Handle correspondence job paperwork and submission.
• Liaise with all parties involved in the project, including authorities, consultants, clients, subcontractors, and suppliers.
• Attend site meetings and inspections, regularly report on progress, and monitor the schedule.
• Prepare site meeting minutes, monitor work schedules, project costing, and procurement, and coordinate with all parties to ensure work progress is completed within the target time and budget.
• Supervise and report the progress of the work to the Project Manager.
• Update construction drawings,
• Give feedback to the project manager on any issue encountered on-site and propose a feasible solution.
• Any other ad-hoc duties assigned by the Project Manager,
• Review of civil & structural working drawings and shop drawings
• Organizing regular meetings with sub-contractor’s technical teams to resolve technical problems in pre-construction and construction phase.
• Preparation of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspections with RTO.
• Reviewing and site supervision of site work.
• Assisting project manager for planning and preparing daily progress reports.
• Tracking and optimizing manpower for each works.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

You will work as an integral part of the laboratory operations team, providing support to the laboratory manager in operations and related laboratory duties such as safety matters, procurement and core equipment training. If you thrive in a dynamic environment and have a passion for managing laboratory operations and contributing to scientific advancements, this role could be an exciting fit for you!

Key Responsibilities

• Oversee the daily operations of the laboratory, ensuring that all processes and procedures are followed accurately and efficiently
  Facilitate training and development of laboratory users
  Support the operations team on laboratory safety and documentation
  Ensure compliance with all relevant regulations and safety standards to maintain a safe working environment
  Manage the laboratory procurement of equipment and supplies, including negotiating contracts with vendors and suppliers
  Implement and oversee maintenance schedules for laboratory equipment to ensure optimal performance and longevity
  Maintain the microfabrication cleanroom in functional state
  Stay abreast of technological advancements to enhance operational effectiveness.
  Other ad-hoc duties

Qualifications

• Bachelor’s Degree in Engineering or related field from a reputable university
• At least one year of working experience in a research/laboratory environment and familiarity with research operations
• Working experience in rapid prototyping, CAD or cleanroom microfabrication is preferred, but not necessary
• Understanding of safety regulations and compliance
• Ability to work cooperatively and communicate effectively with team members and researchers
• Passionate in mastering research equipment and passing on knowledge to users

To apply, please send your cover letter, CV and three references (name, institution, email). Only shortlisted candidates will be contacted.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

General Accountabilities

• Regular visit to SI key partners to further expand and explore potential sales opportunities.
• Supporting key Partners on Sell out Targets set by HQ.
• Planning product promotion according to R&D and marketing research;
• Provide customer support and product solutions training
• Participate in important project product selection, solution providing, bidding scheme and implementation plan evaluation;
• Develop and implement quarterly sales plans and achieving individual KPI set and any other scopes as determine by management.

Job Qualifications

• Candidate must possess at least a Bachelor's Degree.
• Min. 5 years‘experience in related field.
• Good communication ability, can work under pressure
• Strong understanding and background in video surveillance security market will be advantageous.
• Preferred with relevant technical background experience.
• Service-oriented, analytical and takes ownership to solve problems.

Job Responsibilities:

• Develop and implement maintenance schedules for machinery and equipment.
• Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
• Conduct routine inspections and preventive maintenance to optimize machinery performance and extend equipment lifespan.
• Liaise internally between operations teams to address machinery breakdowns and operational concerns.
• Coordinate data collection on auxiliary materials from operations teams and report accordingly.
• Manage receipt, maintenance, and monitoring of machinery parts inventory.
• Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.
• Undertake additional tasks as required to support operational needs and project requirements.

Job Requirements:

• Bachelor's Degree in Mechanical or Mechatronics Engineering or Equivalent.
• Preferably with at least 3 years of working experience dealing with machinery.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

• Expertise/ working/ practical knowledge of containerization platforms – particularly openshift
• Working/ practical knowledge of operating environments & platforms – virtual machines, Linux, Windows; databases – MariaDB. MSSQL; application/middleware/web servers – jboss, ssh, apache, tomcat, kong, nginx
• Fundamental understanding of networking – network load balancing, DNS
• Working/ practical knowledge in security – server / os hardening, ssl, network vulnerability assessments, penetration testing; component security
• Troubleshooting; technical advisory/ consultations; project status reporting; organize calls with partners
• Work in multicultural & multiracial environment
• Occasional (rare) overtime

JOB DESCRIPTION:

Plan, schedule, organize and co-ordinate site installation works of security and communication and related systems projects, which include;

• Planning and scheduling of site installation works;
• Monitor site installation progress of sub-contractors, prepare progress reports,
• Attend site and co-ordination meetings, and technical meetings, prepare site documentation
• Plan equipment installation schedules, and schedule system testing and interfacing works
• Reports to the Project Manager and assist in carrying out specific site related tasks.

Qualifications:

• Polytechnic Diploma/ Degree/ Master in Civil Engineering/Construction
• At least 2 years of relevant working experience
• Good team player, able to lead and multi task
• Excellent interpersonal and communication skills
• MS Office skills – Excel/Words/Powerpoint

As a Process Control System Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

As a PDE Network Engineering Process Control System (PCS) Engineer/Senior Engineer, we will be responsible to develop smart manufacturing solutions towards the Industry 4.0 standard. We will gain exposure and knowledge in many cutting-edge areas including Machine Learning, Advanced Control Solutions and Deep Learning. As a PDE PCS Engineer, we will have the opportunity to develop a complete solution that starts from requirements gathering, data analysis and modeling with big data platform, followed by system development and integration; and then network wide implementation. The work we do directly affects the bottom line of the entire company by providing scrap/excursion control, Statistical Process Control (SPC), Advanced Process Control (APC or Run-to-Run), Fault Detection and Classification (FDC), and overall enhanced process capability. We will meet regularly and team with Process areas to understand their tools, processes, and challenges and work with them to create process control models, strategies, and other methods for ensuring quality output.

Responsibilities

• We develop, implement and improve smart control solutions for optimum manufacturing performances.
• We provide technical oversight, guidance and support for process control implementation
• We conduct intensive data analysis and modeling to identify sources of variation in the process and translate it into control solutions.
• We support PDE KEG team in Classification, Characterization and Categorization and define Data Collection Requirements, Perform Integration and Setup Data Collection in E3 Environment.
• We define Analysis and setup Requirements and Setup Limits and OCAP and engage in periodic review with PCS team and network on BKM practices.
• We develop and deliver training on control systems and related topics.

Requirement

• PhD, Masters/Bachelor’s Degree in Electrical and Electronics Engineering/Computer Science/Statistics/ Mathematics/Physics
• At least 4 years of experience in semiconductor manufacturing advanced process control.
• Experience and knowledge in Programming and Data Analysis. Preferred experience in Python/R/SQL/Hadoop eco-system and/or in the development of web-based applications
• Familiar with Machine Learning.
• Good communication and interpersonal social skills.
• Excellent problem solving and analytical skills.
• Excellent verbal and written communications skills. Good interpersonal skill and a good teammate.
• Excellent Project management skills.
• Ambitious and ability to multi-task and balance dynamic priorities.
• Ability to participate in a multi-functional team environment.
• Willing and capable of international travel, as needed, to accomplish your objectives.

Keen on the role? Apply now!

Optics are critical at KLA and at the core of our tools that are finding defects on wafers and reticles that aren’t visible with the human eye. We do this by using different light sources and nanophotonics to capture images. As an optical engineer at KLA, you’re responsible for developing ultra-high precision optical systems and component designs for complex systems, conducting key optical simulations, modeling and analysis as well as identifying manufacturing issues and developing solutions for these.

Responsibilities:

• Facilitate the optical specifications, lens design, and supplier integration of new optics enabled products for the Optics Development Engineering group.
• Effective use of Code V or Zemax to design low residual aberration generating imaging lenses, relays, spatial/polarization beamsplitters and zoom lenses both from nominal design process to final Monte Carlo tolerance analysis and error budgeting.
• Construct complex system models using above components having all imaging paths with critical parameters needed to produce accurate and efficient raytracing simulations of Strehl/WFE performance, coherent and incoherent PSF size/shape, focal depth of field and pupil, multiple bounce ghost and non-sequential stray light analysis, and polarization ray tracing to quantify transmission, retardance, diattenuation.

Education or experience should include:

• Designing, modeling and analyzing optical systems
• Optical manufacturing processes
• Code V or Zemax Optical software advanced user
• Statistical lens tolerancing
• Ghost and stray light analysis
• Design for manufacturing based on capabilities of Optical metrology
• Specification of precision opto-mechanical assemblies; and
  Data analysis using Matlab or other programs. Any suitable combination of education, training, or experience is acceptable.

Minimum Qualifications

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

We're seeking a skilled Full Stack Software Engineer to contribute to the development and implementation of Litmus & Sentinel, our AI guardrails products. As a Full Stack Software Engineer, you'll play a key role in ensuring the responsible and ethical use of AI technologies.

Key Responsibilities

• Collaborate with cross-functional teams to design, develop, and integrate Litmus & Sentinel into products, ensuring seamless integration and high uptime.
• Contribute to the development of frontend and backend modules, leveraging the latest technologies and best practices.
• Conduct regular code reviews, performance evaluations, and technical assessments to maintain high standards of product quality and reliability.
• Work closely with stakeholders to understand requirements and translate them into technical solutions.
• Stay updated on industry trends, emerging technologies, and best practices in AI ethics and governance.

Requirements

Essential Qualifications

• 3+ years of full-stack software engineering experience in building scalable products.
• Experience with NextJS (TypeScript) and building API backend using frameworks such as NestJS (TypeScript) and FastAPI (Python).
• Exposure to cloud-based application development on AWS.
• Demonstrated ability to write efficient code and build software.
• Strong problem-solving skills and critical thinking.

Nice to Have

• Experience in generative AI-enabled applications.
• Interest in data science, artificial intelligence, and machine learning.

We are seeking an engineer with opto-electronic product development experience, tasked with the mission of design, build and manufacturing of Si Photonics chips. The candidate must possess expertise in one of the following areas: opto-electronics, photonics, electronic circuit development, electronics board design, packaging design, or FPGA development.

Responsibilities

• Perform system-level optical and electronic test and measurements
• Prepare and develop prototype to products based on Photonics IC specifications and designs
• Source suppliers, establish supply chain and photonics manufacturing and collaborate with ODM/OEM/contract manufacturing partners

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics, Applied Physics, or a related discipline in Optics and Photonics
• At least 2 years of working experience
• Candidate is expected to have experience in any one of the following areas: circuit and system, FPGA Development, or Advanced Packaging
• Experience in commercial Si Photonics product design and product engineering is preferred.

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

We are seeking an Engineer with Silicon photonics experience to work on photonics integrated chips design and engineering. The scientist will work on device design, photonic circuit and layout with commercial Si photonics fabrication and optical to electronic testing and measurements. In addition, engineer work on advanced packaging knowledge for chip integration.

Responsibilities

• Conduct research and development for Silicon photonics chips
• Design photonics integrated circuit
• Perform optical and photonics simulations and optimization
• Work with Si photonics foundry for fabrication
• Perform optical and electronic measurements

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics or Applied Physics or related discipline to Optics and Photonics
• At least 2 years working experience
• Candidate is expected to be familiar with optical, thermal, multi-physics, and system simulation software (such as Ansys Lumerical, RSOFT, Zemax, and COMSOL) photonic layout software and understanding of Si Photonics fabrication
• Experience with optical and electronic test and measurements
• Commercial Si Photonics product design and product engineering is preferred