Responsibility :

• Perform all roles and responsibilities required of site supervisors under the Building Control Act.
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations.
• Supervise concreting, pavement, drainage construction works (applicable for C&S)
• Carry out checks on compaction and curing of concrete (applicable for C&S)
• Carry out checks on striking of formwork, re-props and removal of props (applicable for C&S)
• Carry out checks on quality & erection of precast components (applicable for C&S)

Qualification:

• Minimum four (4) years of relevant experience as a civil & structural engineer.
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.

Key Responsibilities:

• Support the implementation and contribute to the continuous improvement of Safety, Quality, Environment, and Health Management Systems, including but not limited to SS506 Part 3, ISO 9001, ISO 14001, OHSAS 18001, and IATF 16949.
• Act responsibly to ensure the safety of oneself and others who may be affected by actions or omissions at work, as per legal obligations.
• Assist management in mitigating Major Accident Hazards to As Low As Reasonably Practicable (ALARP) levels and escalate concerns when necessary.
• Ensure adherence to Customer Specific Requirements (CSR) in all operational processes.

Requirements:

• Strong knowledge in chemical engineering, mechanical engineering, and/or polymer science.
• Experience in process safety management, quantitative risk assessments (e.g., Layer of Protection Analysis - LOPA), or safety case preparation is an advantage.
• SCEM certification or possession of a Steam Engineer/Boiler Attendant certificate is preferred.
• Working knowledge of ISO9001, ISO14001, SS506-Part 3 standards, cost control practices, and relevant regulations.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities:

• Develop and draft process improvement initiatives to enhance occupational safety, product quality, energy efficiency, production capacity, and cost-effectiveness.
• Implement process improvement projects using the Management of Change system and/or Non-Regular Work system.
• Collaborate with R&D and Operations teams to coordinate, plan, and execute new grade trial runs, including overseeing trial operations and evaluations.
• Monitor process performance and key parameters to identify and mitigate risks that may impact plant stability, safety, or product quality.
• Provide technical support in troubleshooting process-related issues, conducting root cause analyses, and recommending corrective and preventive actions.
• Contribute to the preparation and implementation of safety and quality standards by participating in relevant studies such as HAZOP and FMEA.

Requirements:

• Singapore Certified Energy Manager qualification is preferred.
• Familiarity with the Safety Case Regime is essential.
• Knowledge of IATF 16949 standards is preferred.
• Understanding of ISO9001, ISO14001, ISO45001, and SS651 standards.
• Familiarity with IEC 61511 standards is an advantage.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

We are seeking a product manager for our client ST Engineering.

Title: Product Manager

Responsibilities

• Conduct and analyse market research on commercial-defense products with AI technologies to identify market demand, growth opportunities and competitive threats

• Translate global and regional market intelligence into actionable insights that inform strategic product direction and commercial planning

• Provide senior leadership with clear, data-driven reports on market trends, customer demands, and emerging technologies that could influence business strategy

• Ensure compliance for advanced networks, sensors, and AI technologies by managing certification processes and maintaining adherence to industry regulations

• Develop and optimize pricing strategies for networks, sensors, and AI-based solutions that balance profitability with competitive positioning

• Lead the development and execution of GTM strategies for advanced networks, sensors, and AI products, targeting both regional and global market penetration

• Partner with the Product Managers, Marketing and International Business to execute GTM plans that align with customer needs and business objectives

Requirements

• Degree in Business, Engineering or a related field; advanced degree (MBA or M.S.) or certifications in Digitalisation, AI and Data Science

• Experience: 5+ years in start-ups or corporate roles in commercial business functions that focused on business model innovation, go-to-market analysis, compliance and commercialisation in the AI, telecommunications and tech sectors

• Solid understanding of market dynamics and regulatory requirements, with in-depth knowledge of compliance and certification processes relevant to the industry

• Develop and implement pricing strategies and go-to-market plans

• Proficiency with advanced networks and sensors with AI applications

• Strong written and verbal communication skills, with experience in delivering markets, business and commercialization insights and recommendations to senior management

• Exceptional organizational skills and the ability to manage complex, cross-functional initiatives with multiple stakeholders

• Experience leading teams and fostering collaboration across product, finance, and commercial departments

• Working location is Jurong East/Ang Mo Kio

• Singaporean only

Please click apply, or submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Goh Kwan Way Marc

EA License No : 06C4642

EA Reg No : R24120754

We regret that only shortlisted candidates will be notified.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Who You Are

You are passionate about the Airline Crew and Ops business. You see yourself contributing

in a team and believe a team is more than the sum of its team members. You enjoy

communicating with different stakeholders as part of the project delivery, being self-driven

and support the goals of the entire team. You like to challenge yourself and others, actively

speaking out, seeking answers and listening. You like to work in a flat hierarchy structure.

You are adaptive, thrive in a dynamic environment, and see change as something positive

About Us

One third of pilots and cabin crew worldwide are flying with schedules produced by

Jeppesen's innovative solutions. One million pilots use our navigation products, and every

day some 70,000 routes around the world are planned with the help of Jeppesen solutions.

At Jeppesen, a subsidiary of Boeing, you will work with breakthrough technology, exciting

customers and fantastic colleagues from around the world. Our products comprise best-of-breed solutions that break down silos, enable more effective workflow, and amplify

cross-functional collaboration within the airline. Our culture is characterized by creativity,

professionalism and self-organization within an open, diverse and flexible work

environment.

We believe that our employees must be allowed to dream big and have fun for us to remain

one of the top companies in the industry. We encourage and enable our employees to

continuously develop their professional skillset and explore new areas. We are focusing on

continuous improvements and innovations to bring more value to our clients in the future.

About The Position

The Digital Services and Support (DSS) Implementation department is responsible for

development and delivery of our Crew and Ops management products to airline

customers. We are looking for Senior Systems Analyst/Software Engineer to join our

department based in Singapore. This is an opportunity to be part of an enthusiastic team

that solve some of the most challenging airline’s planning and operational problems.

In this position, you will work closely with our clients and develop applications to meet

their business needs. We are looking for applicants with strong communication skills who

can drive technical solutions decision in a confident way. The candidate should be good at

dealing with technical challenges as well as handling client expectations and building longterm customer relations.

Your responsibilities will include requirement gathering, software customization,

optimization modelling, testing and continuous improvement on the value proposition of

our products.

This position will be based in Singapore and the candidate needs to be able to travel to our

customers from time to time as part of the job, mainly within APAC region. We support

hybrid working model.

Basic Qualifications

• Bachelor Degree or higher in Computer Science/Computer Engineering/Electrical
• and Electronics Engineering/Information Systems or other relevant major with
• equivalent experience
• Comfortable working in Unix / Linux environment
• Adept in Python or similar languages
• Strong analytical and problem-solving skills
• Strong verbal and written communication skills
• Thrive working in a self-organized team structure

Preferred Qualifications

• Experience with Unix / Linux system administration, shell scripting, database,
• GitLab, CI/CD
• Experience working within a Scrum team or in similar Agile project setup
• Airline Crew/Ops Management knowledge
• Jeppesen Crew/Ops products customization experience

Relocation:

This position offers relocation based on candidate eligibility.

Work Authorization:

Employer will sponsor applicants for employment visa status based on candidate eligibility.

Other Job-related Information:

This requisition is for a locally hired position. Benefits and pay are determined at the local

level and are not on Boeing US-based payroll.

Responsibilities

· System Engineering Design

· Generating Test Plan & Procedures

· Sourcing and Procurement of System Hardware

· Planning and Setting up Test Lab

· Conduct Factory Acceptance Test

· Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites

· Perform Troubleshooting and Resolving System Faults

· Perform On-Site Acceptance Test

· Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

· Degree in Electrical & Electronics Engineering / Computer Science or equivalent

· Minimum 2 to 3 years working experience in industry

· Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred

· Computer literate e.g. MS office, Visio

· Excellent Oral and Written Communication Skills

· Excellent Time-management

· Good Learning Capability

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Intellimaticz Pte Ltd

Role: OpenShift Container Platform Engineer

Job Requisition Number: JR45643

Job Level: More than 10 years of relevant experience (L4)

Location: Singapore

Job Objectives

Group Technology and Operations (GTO) provides software and system development, information technology support services and banking operations.

We have centralized and standardized the technology components into Singapore, creating a global footprint which can be utilized for supporting our regional subsidiaries and the branches around the world. We operate and support 19 countries with this architecture to provide a secure and flexible banking infrastructure.

Our operations divisions provide transactional customer services for our businesses while also focusing on cost efficiency through process improvements, automation and straight through processing

Key Responsibilities

· Design, implement, and configure OpenShift clusters and containerized applications

· Develop and maintain technical documentation related to design, configuration, usage, troubleshooting, backup, recovery, etc., for all OCP environments

· Provide Technical assessment and advisory in relation to design, installation, configuration, including system upgrade and migration of OCP environment, including the operators for OCP

· Collaborate with development teams to onboard and optimize applications on the OpenShift platform

· Implement best practices for containerization, orchestration, and automation using OpenShift

· Troubleshoot Red Hat OCP configuration and services and container issues, working in collaboration with other relevant IT areas and vendor support towards a quick and effective resolution

· Work on container security solutions and ensure compliance with security policies

· Manage OpenShift clusters for performance, availability, and capacity planning

· Perform assessments and health checks of existing solutions and provide best practice recommendation and guidance to Support team.

· Automate deployment process

Key Requirements:

· Minimum 10 years of practical experience in the implementation of OpenShift/Kubernetes environments

· Expertise with the RedHat OpenShift Container Platform/Kubernetes.

· Experience in dealing with container configuration management, especially Helm and app-of-apps concepts.

· Experience working with infrastructure as code technologies such as Ansible, Terraform.

· Knowledge of application development, Java Spring Boot.

· Experience in CI/CD Pipeline.

Technical Skills:

· Containerization, Linux administration, Virtualization, Networking, and Security

· Providing first class level 3 support

· Java Spring Boot, Helm, OpenShift, Kubernetes

Please forward your resume in MS word format to [email protected]

Please do not send PDF Format Resume. Send the following details

1. Notice period

2. Current Salary

3. Expected Salary

4. Visa Status in Singapore

5. Current Location

Responsibilities:

• Liaise and co-ordinate with consultants, clients and subcontractor on Civil, Architectural & M&E works.
• To assist and prepare method statement, drawings, work progress and other relevant documents for M&E related works with project teams.
• Attend regular site meeting with consultants.
• Supervise all M&E related works on site.

Requirements:

• Diploma / Degree in Mechanical / Electrical Engineering.
• 2-3 years experience in Mechanical / Electrical.
• Fresh graduate may apply.
• Experience in engineering softwares and AutoCAD.

Job Description and Qualifications for a Engineer in the Petrochemical Industry

A Engineer in the petrochemical industry at Jurong Island plays a crucial role in overseeing engineering activities at the site. Here is a job description and qualifications typically required for this role:

Job Description:

1. Technical Oversight: Provide technical expertise and support, resolve drawing discrepancies & technical difficulties with technical team and ensure preparation of detailed method statements and work instructions for scheduled job are done. Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

2. Project Management: Manage engineering projects, including planning, scheduling, and budgeting to ensure projects are completed on time and within budget.

3. Safety Compliance: Ensure strict adherence to safety regulations and protocols of the job site to maintain a safe working environment.

4. Quality Control: Oversee quality control procedures to maintain high standards of construction and operation.

5. Team Collaboration: Work closely with multidisciplinary teams, including chemical engineers, mechanical engineers, and technicians. Coordinates between sub-contractors/vendors/stakeholders and monitor site manpower / material / equipment demands to meet schedules. Liaise with the owners and consultants on the submission related to structural works, project, maintenance works, electrical works and Technical Department.

6. Problem Solving: Identify and troubleshoot engineering issues, offering effective solutions.

7. Documentation: Prepare technical reports, documentation, and progress reports.

8. Supervision: Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.

• Full time supervision at site
• Able to communicate and team work
• Other Ad-Hoc related duties assigned by the company

Qualifications:

1. Education: A Bachelor's Degree in Engineering or a related field is typically required

2. Experience: 10 years of experience as a Engineer or similar job role in the electrical Engineering industry or Mechanical cum steel structural work and maintenace works.

3. Technical Skills: Technical expertise and knowledge in mechanical cum steel structural works , electrical , maintenance works , M& E engineering. Proficient in Microsoft Project and Good knowledge on method statements, Autocads drawing –piping isometric and etc

4. Communication Skills: Effective communication and teamwork are crucial for collaborating with various teams and stakeholders.

5. Project Management: Project management skills are valuable for overseeing engineering projects effectively.

6. Safety Awareness: A strong commitment to safety and the ability to ensure compliance with safety standards is essential.

• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team / department.
• Ensuring that the site works are completed with high quality standards and adhering to safety requirements throughout the project or maintenance works.

Job Duties

• Reports to Project Manager.
• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Lead a group of supervisors and ensure site progress is on schedule.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• Provide technical guidance during project design and construction phases,resolving technical issues promptly and effectively.
• Support the management of manpower, materials, and equipment to optimize productivity and efficiency.

Requirements

• Recognized Degree in Civil / Structural Engineering or equivalent. PE Board recognized degree is preferred.
• At least 6 years’ experience in building or civil engineering project for senior role.
• Minimum 2 complete cycle (piling to roof) for HDB projects.
• Experience in architectural works will be an advantage.
• Technical competence.
• Knowledge in BIM/VDC is an advantage.
• Positive attitude and good team player.
• Demonstrates a sense of urgency.

As a Senior Project Engineer, your main responsibility is to lead, supervise, execute and coordinate project activities together with a group of Engineers, Technicians and sub-contractors leading to successful project completion. You will monitor and control projects on schedule, within budgeted cost and quality and safety standards. You will also work closely with the consultant/owner to ensure the project is delivered according to requirements. As a senior, you are also required to perform system programming and troubleshooting during project implementation.

You should possess a Diploma/Higher Nitec in Electrical and/or Electronics in any Engineering related courses, with 3-5 years’ experience in site supervision and coordination with owner, main contractors, and subcontractors, must have experience in alarm, card access and CCTV system installation knowledge. Must be computer literate and knowledge of Risk Management.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

As a Service Engineer, you have to attend to equipment fault at customers’ premises. Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities. Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met. Also to ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault. To carry out periodic maintenance for our customers.

You should possess a Diploma in Electronics and/or Electrical Engineering with 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc. With good interpersonal communication skills and a valid Class 3 license. Stand-by duty is required.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Electrical Project Engineer / Licensed Electrical Worker (LEW)
Working Hours: Monday-Friday [ 830am - 530pm ]
Address: 1 Bukit Batok Street 22, #04-01 GRP Building, Singapore 659592
Salary: $2,500-$4,000

Requirements:

• Degree in Electrical Engineering (Major in Power)
• Prefer with Class 3 driving license

Responsibilities:

• Preparation of technical specifications.
• Carry out site inspections on LT and HT installations per EMA requirements.
• Assist PE/ LEW to carry out switching of electrical panels.
• Standby and attend emergency call up services at customer installations.
• Prepare incident reports, technical proposals, etc.
• Site supervision of sub-contractors on maintenance works.

Join Our Team at Thatz International Pte Ltd

Are you ready to embrace the new opportunities in the ever-evolving landscape of technology? At Thatz International Pte Ltd, we are committed to identifying exceptional talents to drive the growth of our Next-Generation ICT Engagement and Consultancy (Thatz2.0) or Outsourcing business in the new norm. If you're passionate about leveraging technology to make a difference, we want to hear from you!

IT Helpdesk Engineer (Temp)

Work Location: Downtown Core, Singapore

Job Type: 1-month service contract, subject to renewal

About the Role:

This role is crucial to maintaining smooth IT operations during the absence of a regular team member. The candidate will provide first-level technical support, troubleshoot IT-related issues, and ensure seamless service for internal stakeholders.

Primary Responsibilities:

· Provide first-level technical support for hardware, software, and network-related issues.

· Respond to IT service requests via email, phone, or in-person, ensuring timely resolution.

· Install, configure, and troubleshoot desktops, laptops, printers, and other IT equipment.

· Manage user accounts, passwords, and permissions in systems like Active Directory.

· Maintain accurate documentation of issues, resolutions, and support activities.

· Assist with system updates, routine maintenance, and troubleshooting network connectivity.

· Coordinate with senior IT staff or external vendors for issue escalation.

· Support IT projects and perform ad-hoc tasks as required by the IT team.

· Any other ancillary tasks or works as and when requested and assigned by the Company.

Job Requirements:

· At least 3 years of experience in IT helpdesk or technical support roles.

· Proficiency in Windows OS, MS Office Suite, and basic networking concepts.

· Hands-on experience with remote desktop tools and ticketing systems.

· Familiarity with PC troubleshooting, Trend Micro support, and Microsoft Outlook issue resolution.

· Strong problem-solving and communication skills.

· Ability to prioritize tasks and handle multiple requests efficiently.

How to Apply:

Ready to join Thatz?You can apply through our NextGig.Asia job portal, which is hosted by Thatz International. The job post can be easily found at https://nextgig.asia/Talents/JobSearch/External/?companyname=Thatz%20International%20Pte%20Ltd. Simply sign up and submit your application at https://nextgig.asia/ or send your resume to [email protected].

Shortlisted candidates will be contacted.

Equal Opportunity Employer:

We are committed to fair employment practices and consider all applications based on merit. We encourage diversity and do not discriminate based on race, religion, gender, or any other characteristic.

Data Protection:

Your privacy matters to us. By applying to this job advertisement, you consent to the collection, usage, and/or disclosure of your personal data in compliance with the Personal Data Protection Act.

Our Associate Recruitment Company:

Established in the Year 2000, Thatz Resources Pte Ltd(Agency License No. 04S4557) has been dedicated to matching top IT talent with our clients’ needs across all levels.

Stay Connected:

Follow us on Instagram, Facebook, LinkedIn, and Telegram to stay updated on our latest offerings and industry insights. Join our online community to explore endless possibilities with us!

Instagram: https://www.instagram.com/thatz_international

Telegram: https://t.me/EmployMebyThatz

Facebook: https://www.facebook.com/profile.php?id=100091735044533

LinkedIn: https://www.linkedin.com/in/thatz-recruiter-25234548

Stay Safe and Healthy!

Take care of yourself and those around you.

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Job Responsibilities

• To support the construction team for M&E engineering works.
• Planning/scheduling and coordination of M&E works.
• Project coordination, supervision, and monitoring of the progress of site work.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Ensure quality work in order to achieve CONQUAS and/or QM requirements
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Degree in Mechanical & Electrical Engineering or related fields. PE Board recognized degree is preferred
• Minimum 8 years of relevant experience in the construction industry
• Proficient in Autodesk Revit or BIM software

1. Job scope

• Ensure M&E works are carried out according to specifications/drawings
• Inform the Project Director / Project Manager on any technical / site problems about M&E works;
• Supervise the progress of M&E works on site;
• Coordination of sub-contractor's M&E work and ensuring the work is on schedule.
• Work closely to the clients, consultants and sub-contractors on technical matters
• Supervise and Coordinate M&E services work and work closely with other department staff to meet the project timelines
• Conduct in detailed, M&E coordination with all specialist contractors
• Carry out testing and commission of M&E work; Execute mechanical and electrical works in construction
• Supervise day-to-day site works and manage sub-con/in progress production planning & build.
• Handle the project supervision and documentation
• Manage M&E subcontractors’ submission of method statements, drawings, materials, samples, and work progress
• Dealing with troubleshooting

1. Job Requirements:

• Diploma in Mechanical or Electrical Engineering
• Basic knowledge of computer software e.g. Microsoft Word, Excel, Auto CAD, email, etc
• Knowledge of reading building construction drawings
• 3-5 years of working experience in main-con, preferably in all the projects

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Key Responsibilities:

• Conduct site acceptance tests, oversee commissioning processes, and assist with the start-up of Insulating Glass machinery.
• Interface with customers for after-sales service, identify their needs, and provide tailored solutions.
• Address and resolve on-site maintenance issues by troubleshooting and offering technical support.
• Work collaboratively with customers to fulfill repair schedules effectively.
• Deliver training sessions to help customers optimize product performance.
• Provide feedback from the field to engineering and production teams for product improvements or new designs.
• Ensure compliance with validation processes, including product applications, controls, and documentation.

Requirements:

• Must be very willing to travel as there are times the travelling can take up to 8 weeks.
• Physical ability to handle heavy machinery parts and tool kits (>30kg).
• Ability to read and interpret technical drawings.
• Prior working experience in a technical servicing role is a must.
• Hands-on experience in servicing and the ability to work independently at job sites.
• Willingness to travel for service assignments within the SEA region.
• Strong problem-solving skills and a customer-focused mindset.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

WHO WE ARE:

Build. Scale. Sustain.

PALO IT is a global technology consultancy that crafts tech as a force for good. We design, develop and scale digital and sustainable products and services to unlock value across the triple bottom line: people, planet, profit. We do the right thing, and we do it right. We're proud to be a World Economic Forum New Champion, and a B Corp-certified company.

• We are small enough to care locally, big enough to deliver globally (5 continents, 18 offices, +650 experts from +50 nationalities)
• We are robust and resilient (100% independent and 0 debt)
• We are entrepreneurs and passionate experts: We invest in what we believe genuinely and work as a collective intelligence
• We are positive, courageous, caring, doers and committed to excellence

YOUR ROLE

You will leverage your software development expertise alongside cutting-edge AI tools to accelerate development cycles and drive innovation. As a key member of our engineering team, you'll use your talents in software development, application architecture, and problem-solving to create rapid prototypes and production-ready solutions. You'll harness AI-powered development tools to enhance code quality, automate routine tasks, and expedite delivery while maintaining high engineering standards.

Working closely with project teams and business stakeholders, you'll provide technical expertise that enables innovation through both traditional development practices and AI-augmented workflows. Your outstanding interpersonal skills will help you build or be part of a high-performing engineering team that consistently exceeds expectations by effectively combining human expertise with AI capabilities.

YOUR RESPONSIBILITIES

• Drive Fullstack development with AI-augmented practices.
• Ensure code quality through testing, code reviews, and AI-assisted analysis.
• Understand DevOps workflows and implement CI/CD automation pipelines.
• Design high-performance, scalable solutions using AI-powered approaches.
• Identify and implement opportunities for AI enhancement in applications.
• Leverage AI tool to troubleshoot and resolve technical issues efficiently.
• Stay current with emerging AI technologies and development practices.

YOUR PROFILE

As our company transitions into an AI-focused firm, all developers are expected to demonstrate proficiency in AI-augmented development practices. We are looking for a creative, self-motivated individual with the following qualifications and qualities:

• Deep technological expertise and a strong software development background.
• Experience in developing scalable, reliable, and secure applications
• Proficiency in working with AI coding assistants (e.g., GitHub Copilot, Cursor, ...) for code generation and problem-solving.
• Understanding of prompt engineering principles for optimal AI tool interaction.
• Ability to effectively collaborate with AI tools while maintaining code quality and adherence to best practices.
• Critical thinking to validate and verify AI-generated code and solutions.
• Adaptability and willingness to continuously learn and stay updated with the rapidly evolving AI landscape.
• Excellent interpersonal and cross-group collaboration skills.
• Independent thinker with a strong work ethic.
• Detail-oriented and excellent organisational skills.
• Possess excellent communication skills.
• Strong understanding of common programming patterns and principles.
• Strong team player.
• Strong troubleshooting skills and ability to meet deadlines.
• At least 5 years of relevant experience (8 years minimum for senior). Preferred technologies include ReactJS for frontend development and NodeJS/Java/Python/PHP for backend development.

Candidates with experience in one or more of the following are preferred:

• Solution Architecture
• AI/ML Services and Frameworks
• Cloud Computing Platforms (Azure, AWS, GCP, etc...)
• Native Mobile Development (iOS, Android)
• Hybrid Mobile Development (Flutter, React Native)

We will be prioritizing applicants who have a current right to work in Singapore, and do not require sponsorship of a visa.

MORE ABOUT PALO IT:

We’re eager to adapt to change, learn from our experiences and move to meet our planet’s urgent needs. We are continuously taking action to:

• Become a climate net-zero company
• Attain 50% of revenue from projects with a positive impact
• Train 100% of our workforce on impact
• Achieve B Corp certification among all our offices across the globe
• Continuously measure & improve employee happiness

Our clients are amongst the world's most successful companies. We innovate with both established Fortune 1000s, SMEs and start-ups who aim to make an impact, become global leaders and address the world's most complex challenges.

What We Offer

• Stimulating working environments
• Unique career path
• International mobility
• Internal R&D projects
• Knowledge sharing
• Personalized training

For more on our team culture and benefits, check out our careers page.

PALO IT Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Palo IT SG does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Palo-IT.

Your personal data will be processed for the purposes of managing Palo-IT’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Title: Sputter Process Engineer (ID1603)
Location: Pioneer, transport pick up Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift
Night Shift: 8:00pm – 8:15am
Salary: $2800 - $3600
Benefit: 12 days Annual Leave, AWS and Variable Bonus


Job Description
• Ensure the sputtering machine is tuned to operate at maximum capacity without compromising performance.
• Adjust the sputtering parameters to maintain high-quality output, minimizing defects and inconsistencies.
• Regularly monitor and maintain the sputtering equipment to ensure it remains in optimal condition.
• Optimize the sputtering process to maximize the efficient use of materials, reducing waste.
• Work closely with teams from different departments to ensure smooth operations and address any cross-functional
• issues.
• Analyze data from the sputtering process to identify trends, issues, and areas for improvement.
• Based on data analysis, make precise adjustments to the sputtering machine to enhance performance and quality.
• Implement a continuous improvement approach to keep refining the sputtering process and achieve better results
• over time.
• Any other job assigned by superior.

Requirement:
• Diploma or Bachelor's degree in any Engineer-related field.
• Minimum 4 years of experience in manufacturing process related role for Diploma Holder
• Material Science & Chemistry Fresh Graduate for degree profile.
• Fresh Graduate with strong technical understanding
• Understanding of Sputtering technology
• Good knowledge of Minitab, Microsoft Office

(Hiring for new branch located at BUKIT BATOK area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Mon.- Fri. office working hours
• Salary Range: Basic salary $2,600 ~ $3,500 + Incentive/Commission + Creative Performance Bonus)

Responsibilities

• Responsible for developing long term customer relationship and maximizing customer retention;
• Support on pre-sale and post-sale, not limited to solution proposal on technical requirement, design & budget control, timeline management, etc. based on projects;
• Participate in industrial related exhibitions, marketing campaigns/events;
• Other ad-hoc duties assigned by the superior.

Qualifications

• Min. Higher Nitec in Engineering (any field), or equivalent;
• Entry level applicants with the right learning attitude and positive minder are welcome to apply as comprehensive On-Job-Training will be provided;
• Excellent written and oral communication skills
• Pro-active, possess technical and Negotiation/social problem-solving skills with attention to details;
• Posse valid Class 3 driving licence is a MUST

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work.

(We regret to inform that only shortlisted candidates will be notified)

What you'll be doing

• Assist in the management of facilities and systems, including project management for new building construction and the maintenance of existing structures
• Develop and implement programs for planned maintenance and services, ensuring effective and efficient operations
• Manage service partners and contractors, providing technical advice to user departments as needed
• Coordinate fire safety and Green Mark-related tasks to ensure statutory compliance
• Investigate safety incidents and prepare detailed reports as required
• Ensure the timely resolution of technical issues and maintenance needs, working closely with relevant stakeholders

What we're looking for

• Bachelor Degree level in Electrical Engineering or related studies
• 3 - 4 years of experience in similar setting, preferably Healthcare setting
• Proficient in design calculations, cost estimation, preparation of plans, and detailed engineering design
• Ability to meet quality and regulatory standards, and contribute to the efficient execution of projects

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button.

**We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

**JobStudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties. Please be aware of scams impersonating JobStudio and our employees. You may call our office directly for verification. We will not be liable for any loss arising from scams.**

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Stephanie Toh

EA Personnel Reg No: R1217674

Job Summary

You will be working with a team of professional engineers to challenge status quo, think different, thrive in ambiguity to meet mission objectives of our customers. You will lead a team of software engineers and work closely with other cross functional teams, Service Delivery Managers and Project Managers to deliver quality satellite ground software systems to our customers.

Job Responsibilities

• Drive the design and architecture of satellite ground control and antenna management software systems.
• Lead software team in implementing design, testing, verification, and validation of all software components.
• Implementation of cybersecurity measures for software applications
• Generate and maintain software development documentation.
• Plan and provide necessary software maintenance, training, and consultancy to users on the deployed software.
• Continuously develop new skills & techniques in software technologies to improve and reduce software development time and effort.
• Participate in the definition and development of future products.
• Collaborate with various stakeholders including customers, and engineering teams across organizations.
• Able to challenge the status quo, think different, thrive in ambiguity, care for team members and being ever curious.

Job Requirements

• Knowledge in Computer Engineering or related field.
• At least 8 years’ experience in mission critical system software development.
• Proficient in developing full stack applications, preferably with C#, JS.
• Experience with database, API design, network architecture, message broker, and cloud technologies.
• Experience with core engineering infrastructure tools such as GIT servers, CI/CD pipelines, Container Technologies.
• Familiar with agile software development lifecycles.
• Good understanding of hardware.
• Able to communicate in English and work in a fluid, innovative environment.
• Singaporean only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.