Job Responsibilities

• Design process and perform process calculations for water, wastewater treatment, air treatment projects.
• Design PFD, P&ID with Auto CAD independently or with the help of drafters.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and piping and ducting with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Prepare submissions of the process drawings and textual documents.
• Focus on deliverables and deliver the above-mentioned documents on time.
• Evaluation of technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Other ad hoc jobs.
• Report to engineering manager.

Job Requirements

• Minimum Qualification: Bachelor degree in environmental, chemical engineering or related engineering
• The candidate should be highly responsible for this role.
• A degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment. Master degree holders with less experience will be considered.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.
• Must be able to communicate effectively in English, proficiency in Mandarin will be added as advantage.

Scope

• In General, Plan, manage & control overall scope of Electrical works of

projects.

• Understand Project specifications, prepare specifications for electrical

equipment and systems

• Technically evaluate suppliers’ proposals.

• Guide Designers to prepare Sing[le Line Diagrams/Subcontractors in

producing Field Engineering Drawings and verify their accuracy based on

project specifications and applicable local and international codes.

• Manage Supervisors/Subcontractors for the execution of construction works

by regular visits and meetings.

• Interface with other disciplines proactively to ensure there are no

mismatches.

• Liaise with clients’ Engineers/ Supervisors and Professional Engineers for the

smooth execution of projects.

Requirements

• Recognized Degree in Electrical or Electronics or Instrumentation

Engineering with minimum 8 years relevant working experience, preferably in

the chemical engineering industry.

• Experience with 22KV & LV Electrical system is required preferably in

Singapore and understanding of Singapore codes.

• Matured, Proactive, leadership qualities, good communication and

interpersonal skills are essential and willing to work longer hours based on

project needs.

• Familiarity with relevant Local & International Engineering Codes and

Practices.

• Senior positions will be considered for candidates with more experience in

the relevant field

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

Job Description

The Advanced Remanufacturing and Technology Centre (ARTC) is a contemporary public-private partnership, spearheaded by A*STAR in collaboration with NTU Singapore, to bridge technology gaps in advanced manufacturing and remanufacturing adoption. Smart Virtual Systems Group of ARTC specialises in developing innovative platforms and infrastructure capabilities that enable immersive and connected services for the manufacturing industry.

SVS is seeking a highly motivated Research Engineer to develop highly available and scalable microservices-based applications and AI platform for autonomous manufacturing applications. He/she is expected to demonstrate a high level of independence and initiative, with the ability to effectively engage internal and external stakeholders to deliver solutions.

The key roles & responsibilities include but are not limited to the following:

• Lead the software development and infrastructure system for Autonomous Manufacturing Technologies
• Develop and deploy cloud-native software solutions and implement scalable container platforms using agile methodologies
• Translate business requirements into technical designs
• Coordinate cross-functionally to ensure the project meets business objectives

Job Requirement

• Bachelor Degree in Engineering or relevant disciplines
• 2 years of working experience.
• Understanding of Cloud Native Technologies and DevSecOps CI/CD Pipelines
• Understanding of Kubernetes platform and monitoring tools
• Hands-on experience with deploying and managing microservices using container orchestration platform
• Preferably possess Certified Kubernetes Application Developer Certification
• Can do attitude and happy to interface with multiple stakeholders
• Excellent problem-solving skills, attention to detail
• Excellent verbal and written communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

The Advanced Remanufacturing and Technology Centre (ARTC) is a contemporary public-private partnership, spearheaded by A*STAR in collaboration with NTU Singapore, to bridge technology gaps in advanced manufacturing and remanufacturing adoption. Smart Virtual Systems Group of ARTC specialises in developing innovative platforms and infrastructure capabilities that enable immersive and connected services for the manufacturing industry.

SVS is seeking a highly motivated Research Engineer to develop highly available and scalable microservices-based applications and AI platform for autonomous manufacturing applications. He/she is expected to demonstrate a high level of independence and initiative, with the ability to effectively engage internal and external stakeholders to deliver solutions.

The key roles & responsibilities include but are not limited to the following:

• Lead the software development and infrastructure system for Autonomous Manufacturing Technologies
• Develop and deploy cloud-native software solutions and implement scalable container platforms using agile methodologies
• Translate business requirements into technical designs
• Coordinate cross-functionally to ensure the project meets business objectives

Job Requirement

• Bachelor Degree in Engineering or relevant disciplines
• 5 years of working experience.
• Understanding of Cloud Native Technologies and DevSecOps CI/CD Pipelines
• Understanding of Kubernetes platform and monitoring tools
• Hands-on experience with deploying and managing microservices using container orchestration platform
• Preferably possess Certified Kubernetes Application Developer Certification
• Can do attitude and happy to interface with multiple stakeholders
• Excellent problem-solving skills, attention to detail
• Excellent verbal and written communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• 5 days, Alexandra (South-West), walking distance from MRT
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Suppor current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time
• studies

Interested applicants, please send your resume to [email protected]

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

• 5 days, Alexandra (South-West), walking distance from MRT
• $3200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• No experience can apply

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• 1 year of relevant experience as Process Engineer
• Candidate with no experience can apply as on-the-job training is provided
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Job Responsibilities:

• Develop and implement quality assurance plans, standards, and protocols for production or project management.
• Review project specifications and engineering drawings to establish quality standards.
• Ensure all work complies with relevant codes, ISO standards and regulations.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Identify and document any quality issues, non-conformance and corrective actions.
• Providing guidance and advice to the Project Manager on significant changes to the quality management system with direct impact on site operations.
• Training the production team on quality control measures to improve product excellence.
• Collaborate with production, engineering and project management teams to identify and implement process improvements.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Conduct root cause analysis for site level NCRs and recommend corrective action and preventive actions.
• Overall knowledge of safety policies and procedures to achieve safe work practices.

Requirements:

• Diploma /Degree in Engineering, Quality Management or related filed.
• Minimum 5 to 8 years of working experience quality assurance/control in industrial /equipment production or engineering projects would be advantageous.
• Proficient in quality inspection tools, data analysis and report writing.
• Up to date knowledge of federal and industry standards and best practices.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Excellent problem solving and analytical skills.
• Keen attention to detail.
• Willingness to travel for site inspections.
• Able to work independently and a good team player.
• Candidate who can start work within short notice or immediately would be advantageous.

Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc
• Develop the work schedule and coordination of the project works to ensure project is on schedule
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works
• Handle and resolve all site technical relating matters
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met
• Prepare all relevant checklist for Installation and Testing & Commissioning Works
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works

Requirements

• Degree in Mechanical Engineering
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client
• Good technical knowledge in understanding the Mechanical System
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills
• Meticulous and analytical with excellent problem-solving skills
• Highly motivated and able to work independently with minimal supervision

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

General Description

The incumbent is responsible to provide technical process support to the Production Shift teams and the Facility Owner of the process area in the LNG Terminal.

Roles and Responsbilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

• Provide technical support for routine and non-routine production activities and develop best practices to improve production safety, reliability and efficiency.
• Evaluate current production activities, make recommendations and execute continuous process improvements in the areas of safety initiatives, equipment reliability and operational excellence.
• Troubleshoot for process and equipment problems to ensure greater operational reliability and efficiency
• Measure plant performance including power consumption index, operating index relating to process availability, efficiency and reliability and other relevant field data surveys.
• Undertake energy efficiency and optimisation projects as required.
• Undertake alarm management for assigned area and proactively drive alarms to ensure robust operations.
• Undertake Management of Change (MOC) for terminal modifications and take on lead role for various MOC projects as required
• Support engineering design analysis including preliminary design development, (heat and mass) calculation, technology evaluation and equipment selection.
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, model reviews, Safety Integrity Level reviews, RAM analysis, layout and other process etc and support the design validation process in alignment with contract and regulatory requirements and specifications.
• Review standard operating procedures and start up manuals to ensure compatibility with design limitations and procedures are adequate.
• Lead, review and perform inspection and investigation of equipment and production systems to facilitate optimisation and formulate remedial procedures.
• Assist the Production Manager to report and investigate any related HSSE near miss / violation.
• Custodian of Operation Abnormality Reports, to manage the overall status of the reports, perform initial investigation to determine root cause and to drive root cause analysis and resolution.
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum of eight (8) years practical experience in process engineering function in an oil, gas or petrochemical industries.
• Conversant with local/international codes, regulations, standards, best practices in the process.
• Good knowledge of commissioning, operations and troubleshooting of a variety of large and complex processes in the oil, gas or petrochemical industry is critical.
• Knowledge of the LNG / natural gas or other hydrocarbon industries would be advantageous. Candidates with experience in cryogenic plant design, commissioning and start-up are preferred.
• Certified Energy Manager certification will be an advantage.
• Knowledge of Process Safety Management, Process Hazard Analysis and Functional Safety would be advantageous
• Knowledge of electrical, instrumentation, controls and mechanical discipline would be advantageous
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Self-motivated, independent and strong team player
3. Strong interpersonal, written and verbal communication skills
4. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties.

Education

Bachelor degree in Chemical Engineering

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines.
• Supervise and coordinate site installation works by contractors.
• Attend site coordinate meetings with main-con, consultants and contractor.
• Lead daily briefing and execute the project activities and oversee implementation of the quality plan.
• Coordinate installation activities, site safety, order, arrange and receive M&E major equipment delivery for contractors’ installation.
• Arrange and attend material, equipment, installation, and testing inspection.
• Carry out testing and commissioning, combined services testing for TOP/CSC,
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards and safety aspects.

Requirements

• Min Diploma in Building M&E Service (ACMV, FP, P&S, BMS, Ele and ELV) , Mechanical and Eletrical Engineering
• Min 5 years of experience
• Familiar to Building services (ACMV, FP, P&S, BMS, Ele and ELV) code requirement and basic design and necessary submission for tender bidding and construction, TOP and CSC
• Experiences for coordination with architecture, C&S and process team for M&E Space, maintenance and fire exit routing
• Skilled in design, coordination, and project management
• Experience in tender bidding, with strong analytical and critical thinking abilities
• Interpersonal, communication skills & leadership
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification are highly desirable

Job Description

• Lead, Plan, organize, supervise and liaise closely with operation team on all lifting activities.
• Overall in-charge for preparing lifting and erection plan for all the Crawler or Mobile Cranes.
• Prepare, develop and review Lifting plans, Method Statement, Risk Assessment and Safe Work Procedure of all executive teams for any lifting activities.
• Conduct routine checks and inspections on work site to ensure compliance with authorities and client’s requirements.
• Daily walk about around assign areas of site and make a note of compliance and non-compliance to HSE operating procedure and works are carried out safely.
• Able to prepare and review lifting plan and coordinate site lifting supervisors, riggers and signalman, and being the focal point for all site lifting operations Perform discipline checks of the procedures and analysis.
• Read project specifications and provide feedback from an engineering perspective. Liaise with clients, and project teams.
• Coordinate and interface with Client/ other contractors to harmonize the onsite lifting arrangement.
• Conduct safety assessment & discussion with EHS team (safety) for any latest safety policy and implement the safety requirement when needed.
• Periodically monitor and implement any procedural changes according to the local authority / client’s requirement & regulation updates.
• Periodically monitor and execute the lifting work improvement at lifting site inclusive all facilities/tools.

Requirements

• Degree in Civil Engineering or any related Engineering
• Minimum of five (5) years site experience and has attended MOM or Institute of Engineers Singapore conducted Appointed Person - Lifting Operations course to oversee the activities of the various lifting operation on site
• Able to communicate well (spoken and written).
• Possess a willing to learn and proactive attitude.

Responsibilities:

• Prepare CAD drawings, REVIT/BIM to support customer’s project specifications and requirements
• Create drawings based on PDF, hand drawn or verbal instructions using AutoCAD to support customers’ project requirements
• Calculate material requirements and liaise with internal team for accurate and timely material orders
• Prepare drawings and compile documentation for project submission

Requirements:

• Possess 3 years of proven experience in AutoCAD/REVIT/BIM, preferable in mechanical engineering field
• Possess excellent computer skills in AutoCAD software, BIM and MS Office (Excel, Powerpoint, Word & Project)
• Independent, team player with ability to multi-task
• Possess strong communication and organization skills

You may apply to below link,

https://sg.quickhr.co/view_job.php?jd=MTJxdWlja19ocl9yZWNydWl0bWVudA==&cd=MjA5MHF1aWNrX2hyX3JlY3J1aXRtZW50

*Due to the volume of applications, only shortlisted candidate will be notified. Thank you for your understanding and application.

Job Description

• Supervision of civil and structural works in accordance to the project specifications, construction drawings and Building Control Act and Regulations
• Responsible for site supervision with the RTO as a team and resolve all site issues
• Manage the site supervisors with respect to civil and structural engineering works.
• Attend site, progress, variation and coordination meetings
• Ensure site safety and prepare safe work procedure with Safety personnel
• Ensure the smooth completion of the project

Job Requirements

• Degree in Civil & Structural Engineering or equivalent
• Registered Resident Engineer (with BCA / IES / ACES) with minimum 5 years of Resident Engineer Industrial experience
• Strong Interpersonal and communication skills

Job Responsibilities:

Be responsible for creating CAD drawings and bill of materials – shipping containers and lifting apparatus.

Able to conduct finite element analysis, and sizing calculations for anti-vibration devices and protective foams.

Able to tabulate the required bill of materials.

Able to assist Procurement Team with Supplier’s enquiry.

Able to work with Production Team or Contractor for the manufacturing.

Able to work alongside Professional Engineer for equipment certification.

Able to write work instruction.

Job Requirements:

Min 3 to 5 years relevant experiences

Proficient in MS Office, Shared Point, & Solidworks.

Proficient in Written and Verbal Communication skills.

Experience with Structural Calculations and Analysis.

Able to write in a clear, concise manner, and generate comprehensive design reports.

Ability to adapt and multi-task.

Relevant work experience in logistics, semi-conductor or electronic industry is an advantage.

Experience in the creation and implementation of continuous improvement program is an advantage.

Able to speak Mandarin as this position needs to communicate with Mandarin speaking counterpart.

About the Opportunity

The IT Engineer provides support to employees experiencing technical problems and performs troubleshooting, problem diagnosis, resolution, and escalations. In-depth knowledge and hands-on experience with system and server administration and virtualization experiences are required. Area of expertise for this position includes Microsoft technologies, VMware virtualization, Citrix VDI, Linux and storage. Prior experience supporting L1 and L2 requests in IT would be helpful for this position.

Job Responsibilities:

• Primary responsibilities will include overseeing and executing system-based projects, writing scripts to automate manual processes, and creating system documentation & diagrams. Provide system administration and configuration of specialized mission applications and software.
• Strategic Infrastructure Management: Global Administration, maintenance, and support of the Server environment and VDI infrastructure, ensuring optimal performance and scalability to meet the evolving needs of the organization as the need arise.
• Incident Resolution and Technical Escalations: Act as a point of escalation for complex technical issues, leveraging your advanced troubleshooting skills to swiftly diagnose and resolve incidents, minimizing impact on business operations.
• Advanced Problem Analysis and Resolution: Conduct in-depth analysis of system problems, particularly those related to hardware, software applications, and operating system servers, employing sophisticated diagnostic techniques to implement effective solutions.
• Comprehensive Documentation and Knowledge Management: Develop and maintain comprehensive documentation, including automation scripts and procedures, to streamline troubleshooting processes, enhance team collaboration, and ensure continuity of operations.
• Root Cause Analysis and Problem Management: Lead root cause analysis efforts for critical problems and major incidents, identifying underlying issues and implementing preventive measures to mitigate future occurrences, thereby safeguarding business continuity.
• Proactive Performance Monitoring and Security Compliance: Utilize advanced monitoring tools and command-line interface utilities to continuously assess server performance, identify potential vulnerabilities, and ensure adherence to stringent security standards.
• Change Management and Risk Mitigation: Spearhead the planning, coordinating, and executing system software upgrades, patches, and firmware updates, meticulously evaluating risks and impacts to minimize disruptions and maintain system integrity.
• Effective Communication and Stakeholder Engagement: Interface with IT management, end-users, and departmental teams to communicate feedback, share insights, and champion initiatives aimed at enhancing operational excellence and delivering exceptional service quality.
• Follows SOP: Support procedures and provides troubleshooting guideline and cause analysis for technical issues

Job Requirements

• BS degree or equivalent experience.
• 8 + years of advanced experience as a IT Administrator or Engineer with hands on experience in servers, virtualization and storage.
• Active Directory (AD) & Domain Controller Administration including DNS and GPO management in a multi-site environment.
• Building and administering Windows\Linux servers and accompanying infrastructure, maintaining capacity and performance in enterprise environment.
• Candidates must possess experience with both Windows and Linux mixed environments.
• Experience with Infrastructure – virtual environment, VDi, Citrix Netscalar, Backup& Restore, disaster recovery and business continuity
• Hardware: Dell MX7000 Chassis and MX700 series blade configuration, PowerEdge rack servers
• Storage: NFS and ISCSI storage concepts. Cronjobs and rSync functionality
• Networking: TCP/IP, VLAN, DNS, Load Balancing and security concepts
• Virtualization: VMware 7 and above and Citrix Storefront
• Transferable Skills: Communication, ability to work with a diversity of people, ability to plan and organize, time management, analytical problem solving, Project Management, & customer service skills.
• Strong communication and collaboration skills
• Ability to work independently and as part of a team.
• Willingness to learn and adapt to new technologies and processes.
• Ability to multi-task in a fast-paced IT environment with fluctuating priorities and deadlines.
• Ability to interface and work with varied positions and levels of technical knowledge both within the department and with other departments in the company.

Responsibilities:

• Performs activities related to the electrical works and maintenance needed onboard vessels

• Systems / power generation / backup power source / fire detection system and safety system for 2 stroke or 4 stroke engines

• Assist to guide onboard service engineers on the task which require electrical engineers’ competencies so as to operate and maintain electrical/electronic/electro-hydraulic/electro-pneumatic/automation systems efficiently.

• Termination works on vessel / Trouble shooting of 4 stroke generator safety system / Electrical governors would be value added

• Advise customers / Supt, the need of shore assistance or need to procure spares in case defects of equipment failures which cannot be resolved thru onboard attendance.

• Carry out on board attendance in liaison with the Service manager

• Provide work done report and submit to service managers

• Experience in carrying out maintenance marine alternators is a plus

• Carry out annual calibration of Cargo tanks Temperature and Pressure sensors, manifold pressure gauges of fleet vessels

• Identify areas for improvements and to have good PR in dealing with customers in SG or Overseas regardless of location

Requirements:

• Diploma in Electrical Engineering / Technical Cert

• Preferably 5 years of relevant work experience in Marine Electrical Industry.

• Hands on experience working onboard sea going vessels as ETO (Electrical-Technical Officers) would be value added

• Possess good knowledge of electrical power distribution, maintenance and practical hands-on skills

• Proficient in troubleshooting & fault diagnosis skills related to electrical, instrumentation, automation & control and including air conditioning and ventilation system

• Able to read and understand Engineering Drawings (Electrical and pneumatic)

Familiar with regulatory and legislative shipping industry environment

A team player and collaborate well with office technical team as well as shipboard team

• Able to communicate well and Fluency in English in both written and spoke

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules
• Check and ensure all the temporary work is carried out as per PE design

Requirements

• Degree in Civil Engineering or equivalent
• Min 2 to 3 Years Relevant Work Experience (C&S RC / building work)
• Proficient in English writing and speaking
• Microsoft application (words, excel, ppt etc)