Job Responsibilities

• Liaise between the various disciplines and departments to ensure works are carried out efficiently
• Ensure that the project meets the required specifications and standards
• Study and understand project spec, scope of work and scope of supply
• Assist to ensure that resources arrived are in accordance to the orders and requests raised
• Ensure that the resource allocations for production and project team are on time to ensure construction works can proceed on time
• Monitor and ensure that budgets are updated
• Support all HSE and QA/QC efforts and ensure works are in compliance to such efforts
• Assist in the preparation of reports to update the management on overall outyard activities
• Attend Client & Production Meeting together with Project Managers
• Tracks potential variations for the Projects and to follow up with Commercial
• Monitor progress status of individual Disciplines
• Submits Project Execution Plans for Tender Submission
• Any other ad-hoc duties assigned by Superior

Job Requirements

• Diploma/Degree in Mechanical Engineering
• Min 5 years of experiences in Marine Project Management holding the same designation
• Good management and leadership skills
• Have own vehicle to travel to site inspection when needed
• Able to travel overseas for short trip when required

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design &calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/ Mechanical/ Electrical Engineering
• Strong technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

• Recognized Degree in Telecommunications or Electronics Engineering.

• Minimum 5 years of experience in the oil and gas industry.

• Experience in designing & producing deliverables of telecom systems such as Radio Systems (Tetra/UHF/VHF), PAGA, PABX, CCTV, Access Control, Radio, Microwave, Navigational systems, GMDSS, Microwave, VSAT, DAS system for Oil & Gas projects.

• Experienced in Engineering studies such as PAGA coverage study, CCTV coverage study, RF coverage study.

• Able to work independently, multi-tasking, attention to detail, good communication skills, and high time conscious.

• Willing to travel overseas for short-term and/or long-term assignments.

• Lead/assist in the project from detailed design, documentation submissions.

• Evaluate specifications, conduct coverage studies, and prepare design calculations to construct an integrated telecom system in accordance with project requirements with the most suitable and most cost-effective design.

• Client facing environment, to hand technical discussions, design clarification meetings. Able to direct and lead a team of design engineers.

Ensure project quality standards and conformance with design plans and specifications are maintained.

JOB DESCRIPTION

In this role, you will need to

1. Plan, create, release and follow up on production orders

2. Carry out preventive maintenance of machines and perform quality control inspection

3. Liaise with machine manufacturers to perform troubleshooting of production equipment as and when needed

4. Review and recommend disposition of rejected in-coming raw material, work-in-process and finished goods

5. Investigate quality escapes and recommend preventive measures

6. Collect and analyse production data to improve production efficiency and processes

7. Perform stocktaking duties

8. Perform any adhoc duties as assigned by superior

JOB REQUIREMENTS

To qualify for this role, you will need to have

1. At least a minimum NITEC in Mechatronics Engineering or Mechanical Engineering certificate.

2. 1 to 2 years of working experience preferred.

3. Ability to understand mechanical and electrical drawings

4. Good command of written and spoken English needed for communications with overseas vendors

5. Competency in the use of Microsoft Office such as Outlook, Excel, Word & PowerPoint

6. A team player who is self motivated and demonstrates initiative

7. A highly analytical and meticulous problem solver

8. A hands-on learner and loves working with machinery

9. Comfortable with working with a diverse group of people

Others :

• 5 day work week
• Career advancement opportunities
• Within walking distance to Gul Circle MRT
• Located next to bus stop
• Free parking

- Carpentry workshop

- Understand carpentry technical details

- Able to read construction drawing and guide fellow carpenters

- Allocate tasks to carpenters and manage daily manpower

- Manage daily operations in factory, ensure smooth production and oversees all tasks in factory

- Able to go to site for site measurement

- Able to discuss carpentry details with clients and architects

- Great team player and leader

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. As a member of the operations team, the Associate Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Ang Mo Kio, Singapore.

Core Responsibilities

• Perform Temperature, Mechanical and Electrical Calibration as per international standard or WI using reference master, tester and etc (on site and in-house) with report and necessary administrative work
• Conduct routine maintenance of lab equipment as schedule and assigned
• Ensure proper delivery of service to customers
• Any other duties as assigned by Manager / Section Head / Senior staff

Requirement

• Degree, Diploma and ITE in Aerospace / Precision or Mechanical Engineering
• 1 year or more experience in Temperature, Mechanical and Electrical Calibration is preferred
• Able to work under pressure with acceptable level of output and able to complete work according to deadlines set
• Customer Oriented with good working attitude and to maintain good interaction with colleagues
• Candidate with a valid class 3 driving licence will have an added advantage

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

OBJECTIVES:

• Act as Tech Transfer Lead for process technology transfers from R&D, CMC or external collaborators to and from GMP clinical manufacturing of different modalities and platforms to meet tech transfer objectives.
• Provide external contract manufacturing oversight in technical operations to achieve project deliverables and timeline.
• Provide supports in biologics and vaccine plant start up and operation by providing technical evaluation, investigation and CAPA.
• Collaborate closely with key stakeholders within GMP clinical manufacturing such as Operations (Drug Substance or DS, Drug Product or DP), QA, Engineering, Validation in meeting operational targets and program /tech transfer schedule.

RESPONSIBILITIES:

• Lead/support tech transfer of process/product with different modalities/platform from internal stakeholders and to/from external manufacturing partners in terms of tech-ops support such as exceptions, change control and process input.
• Provide external manufacturing support as part of tech transfer oversight.
• Work and coordinate with different sub teams during project phase to ensure their timely involvement and alignment to the strategy and successful completion according to schedule.
• Act as Subject Matter Expert in process operations equipment, including but not limited to single use bioreactors/fermentors, mixers and fill finish equipment (DP)
• Perform product/process root cause analysis for complex deviations and investigations using established problem-solving tools.
• Mentoring operations crew in process and equipment knowledge and know-how to operate equipment as per design intent.
• Provide impact assessment and support to change control and deviations of GMP runs during clinical manufacturing
• Perform risk assessment related to process, engineering and safety (ie FMEA)
• Support process/equipment procurement specification review, qualification/validation activities
• Support standard operating procedures (SOP) generation for process/equipment.
• Drive/support operations crew in troubleshooting related to operational issues when required.
• Support Audit as technology transfer SME where required.
• Act as a training/document coordinator for the department
• Act as a delegate to the Supervisors/Managers and conduct team activities in their absence.

EDUCATION, EXPERIENCE, KNOWLEDGE AND SKILLS:

• BSc/MSc in a engineering/scientific discipline (Bio/chemical engineering/life science/biology/chemistry) with 4-8 years relevant industry experience
• Biological technology transfer experience required, in vaccines would be an advantage
• Experience in aseptic process simulation/media fill would be an advantage.
• Experience/knowledge of cGMP practices as applicable to upstream/downstream vaccine manufacturing processes (DS), process development is desirable
• A thorough knowledge of Good Documentation Practices (GDP) and Good Manufacturing Practices (GMP)
• Well-organized and detail-oriented, with ability to effectively prioritize tasks with agility, eager to learn, interact and collaborate effectively with various stakeholders in a team environment and consistently demonstrate reliability and responsibility.
• Must be a team player with good working ethics, initiative, diplomacy, positive influencing abilities and drive
• Good oral communication and demonstrable, exemplary writing skills
• Experience with problem solving and statistical tools will be an advantage.

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

About the Job

• Electronic assembly engineer
• Reports to production manager
• Indoor air-con working environment
• Specially looking for talented graduates
• Full time job

Job scope:

- Electronic hardware assembling and testing.

- Communicate with clients

- Follow up customer's order

Requirement:

- Requires extensive knowledge of electronic principles and assembly experience.

- Aggressive & self motivated

- Diploma holder or higher certificate;

- Fluently communicate with English and Chinese

- Basic S$ 2’500/month ~ S$ 3’500/month + High commission + Bonus

- Probation period 6 months

About us

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

The Sourcing Specialist is responsible to implement sourcing plans and tactics to effectively manage the sourcing activities related to their assigned portfolio to maximize supplier performance (cost, quality, lead time) and support the business plan

Roles and Responsibilities:

• Comply with company and local procedures applicable to the job function.
• Work closely with Sourcing Manager or Sourcing Leader to guarantee supply for portfolios.
• Identify opportunities and implement actions to continually reduce wasted time, money, and resources from assigned tasks.
• Implement sourcing plans with the goal of assuring specified quality, meeting required delivery times, and minimizing cost.
• Conduct requests for information, quotation, information, proposal (RFI/Q/P) and bidding processes, minimizing risk and maximizing value in terms of quality, delivery and cost.
• Select a high-performance supply base for assigned portfolio, in accordance with a short-list of preferred suppliers defined by Business Line strategy and Category Managers.
• Negotiate prices and terms with suppliers to meet specified quality, delivery and cost objectives.
• Execute contract negotiation and development in coordination with Sourcing Manager and Supplier Contract team.
• Take charge of Approved Supplier List (ASL) creation.
• Drive the parts and process qualification in coordination with Qualification team.
• Document the performance of action plans and timelines for assigned sourcing projects.
• Evaluate current and prospective suppliers through supplier reviews, site visits and capability evaluation, in coordination with Supplier Quality teams, to assure supply capabilities, on-time delivery, quality and service.
• Maintain accuracy in SAP parameters.
• Any other assignments or tasks assigned to support business opportunity and on time shipment of the technology center.

Qualifications and Experience:

• Bachelor’s degree in Engineering (or similar fields)
• 3-5 years of experience in Supply Chain related functions
• Experience in pricing negotiation and contract establishment

Project Description:

We're expanding our Managed Services capabilities and seek an experienced APAC Production Support Lead for trading and risk management systems. The role involves overseeing current engagements, primarily on the Murex platform, ensuring quality, and aligning with global best practices.

Responsibilities:

• Supervise current L1/L2 production support engagements, utilizing onsite/offshore resources in business hours and 24x7 shifts.
• Bring critical and quality-driven thinking to maintain high-quality standards.
• Establish a delivery and quality assurance framework with processes, best practices, and KPIs.
• Define a strategy for building tools and accelerators for improved support.
• Manage client communications, ensuring alignment with SLAs and service delivery.
• Select and coach profiles, fostering a mindset for critical systems support.
• Collaborate with technology and business teams to minimize stability issues.
• Ensure adherence to Incident, Change, and Problem Management protocols.
• Introduce best practices and conduct regular reviews and meetings.

Mandatory Skills Description:

• 10+ years in production treasury application support for banks.
• Experience managing support teams across APAC, including team building and restructuring.
• Experience managing teams on 24x7 shifts.
• Proven leadership in defining processes and best practices.
• Strong background in Support Lead roles.
• L1 & L2 application technical and functional support experience.
• Knowledge of Treasury platform architecture (Murex, Calypso, Kondor).
• Proficiency in SQL, Pl/Sql, and system backups related to UNIX and Database.
• Excellent team collaboration, written and verbal communication skills.
• Effective stakeholder management.
• Flexibility for shifts and weekends.

Nice-to-Have Skills:

• Expertise in trading platforms (Murex, Calypso, Orchestrade, Finastra, FIS).

Job Description

What you will do:

• Support and complement the engineering team and sales team in the process design related to refrigeration systems and gas compression systems inclusive of compressor selections with Frick Screw compressors, York multi-wheel centrifugal compressors, and other compressors or chillers for the projects. This includes vessel and heat exchanger design using HYSYS and HTRI software and optimal to have AutoCad 2D experience for P&IDs and PFDs.
• Assume responsibility in providing engineering support for the design of refrigeration systems and gas compression systems for sales and projects, attend HAZOP meetings, and assist the sale and project teams at customer meetings.

How you will do it:

• Design refrigeration systems for various applications and perform a heat balance.
• Prepare P&ID diagrams, equipment layout/piping layout for refrigeration system.
• Size refrigeration equipment such as pressure vessel, heat exchangers, valve and controls
• Able to read and understand project/technical specification and comply to require specification.
• Specify temperature, pressure and differential transmitters, and flow meters along with the instrument engineer.
• Design refrigeration system for cold rooms/chilled water system/glycol system
• Work with different vendors on the selection of third-party equipment
• Able to hold technical discussions with vendors, sub-contractors and customers.
• Frequent site visits to ensure the refrigeration systems are integrated and installed in accordance to original design and provide effective solution for any impromptu design changes.
• Meet or improve the committed submission schedule of engineering documents, and complete assigned tasks within the time frame given, with minimal supervision.

What we look for:

• Diploma / Degree in Chemical Engineering, or equivalent.
• Proficiency in AutoCAD is a must.
• Familiarity with international engineering codes such as ASHAERE/API/ IIAR/ ASME etc
• Minimum 5 years relevant experience, preferably in refrigeration, chemical process, oil and gas (onshore and offshore), food and beverage, or similar industry.
• Experience in engineering software - HYSYS/ HTRI is a plus.
• Knowledge in API is a plus.
• Experience in working with site contractors and vendors on the successful implementation of the refrigeration system design at site.
• Team player, effective communicator, able to build customer relationship and customer satisfaction.
• Able to work independently and have a strong sense of responsibility.

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Description:

- Assist the Program Manager in the design and development of Rocket Motors.

- Responsible for the design of all assembly and testing fixtures.

- Assist the Team in all Firing Trials and will also be responsible for data collection and analysis.

- Involved in Modeling and Simulation including FEA.

Job Requirements

- Degree in Mechanical Engineering

- Able to work as a team and enjoys outdoor activities,

- Excellent communication and presentation skills

- Able to contribute ideas and solutions.

· Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

· Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.

· Interacting with clients, interpreting their needs and requirements, and representing them in the field.

· Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

· Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

· Reviewing the engineering tasks and initiating the necessary corrective actions.

· Developing specifications for the project's needed equipment.

· Creating frameworks to measure the project's metrics and data collection.

· Establishing field test methods and methods for monitoring the quality of those tests.

· Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

· A Bachelor's degree in engineering or a related field.

· A valid engineering license.

· 4 or more years' field and project planning experience.

· Excellent computer literacy and knowledge of design and visualization software.

· The ability to work with multiple discipline projects.

· Excellent project management and supervision skills.

· Excellent organizational, time management, leadership, and decision-making skills.

· Strong written and verbal communication skills.

· Knowledge of applicable codes, policies, standards, and best practices.

Project Description:

• The department is responsible for development and maintenance of Capital Market IT applications (in-house and package) used worldwide, covering Front Office (Murex, Apex, Orchestrade...), Back Office (Summit, Calypso...), Market data referential (Asset Control..), Market Risk (in-house application on big data technologies).
• In a challenging and multicultural environment, the candidate will join a dynamic team of experts to support and enhance the bank's Interest Rate Derivative Back-Office Platform built around Summit, a software package from Finastra.

Responsibilities:

• As a developer and release engineer, you will be part of an international team focused on technical activities to maintain and enhance the bank's Interest Rate Derivative Back-Office Platform. You will also contribute on modernizing the platform's ecosystem to integrate it with the banks' tools and new technologies.
• Responsible for the release management (build and deployment)
• Coordinate the deployment in production of new application releases
• Provide technical expertise to modernize the release process (CI/CD) and develop new tools if required
• Contribute to the Architectural design of the Solution
• Provide level 2 and level 3 application support (technical and functional) with close interaction with the Business and IT departments
• Manage the non-production environments
• Maintenance of current application modules and development of new functionalities with Business Analysts.
• This role requires a pro-active mindset in security, incident preventive measures, productivity and global improvement of the quality of service.

Mandatory Skills Description:

• Minimum of 2 years' experience in Release Management (CI/CD and DevOps) and its tools (E.g. GIT, Jenkins, Nexus...)
• Minimum of 2 years' experience of development on Summit
• Minimum of 4 years' development experience with a market standard language (Preferably C++, C# or Java) and good understanding of the Development life-cycle
• Good hands-on experience with SQL and Databases (E.g. Sybase / Oracle)
• Good hands-on experience to the Unix/Linux platform and Shell scripting• Experience using and deploying CI / CD and the related tools (e.g. Git, Jenkins...)
• Careful observance of standards and processes with attention to details
• Experience with production support activities
• Exposure to the Unix/Linux platform and Shell scripting

Nice-to-Have Skills:

• Exposure to Back-Office and Capital Markets system similar to Summit in CIB organization (E.g. Murex, Calypso, Sophis, Front Arena, Kondor+, Opics...)
• Knowledge in Financial IRD products IRD and Capital Market FO/BO environment
• Exposure to the Agile Development Methodology
• Other technical skills including Middleware (e.g. Kafka, MQ Series...), Monitoring, Batch Scheduling, Software Quality
• Security awareness and best practices
• Autonomous, self motivated and excellent team player
• Ability to work well under pressure

Job Description

• Production planning and delivery planning
• Handle customer order by phone call
• Simple machine maintenance
• Simple administrative work
• Need to take night shift alone, usually one week per month
• Work at cement plant inside Jurong Port(not Jurong Island)

Requirement

• O-level and above
• Fluent in English
• Familiar with computer and simple MS office
• Customer oriented
• Effective in communication with customers and capable of converyingg information cleatly and accuratley to delivery drivers
• Computer literated with excellent organisational skills and experience in schedule co-ordination
• Eyes for details, efficient in administrative work

We are looking for a Software Engineer proficient in Java Spring to work on large scale projects.

• 5 days work week (Mon - Fri).
• Attractive remuneration package.
• Hybrid work arrangement.

Responsibilities:

• Actively participate in backend software development (Java Spring).
• Work closely with stakeholders throughout the software development life cycle.
• Develop and deploy portable applications using container technology (Docker/ Kubernetes).
• Involve in functional and unit testing.
• Engage in pair programming, code reviews and discussions to improve code quality and maintainability.

Requirements:

• Experience with Java Spring Framework.
• Experience in leveraging on cloud platforms such as Amazon AWS.
• Proficient in unit and functional testing.
• Collaborative team player with good interpersonal skills.
• Experience in solution/system design and architecture is highly advantageous.

Interested candidates may apply via email to [email protected] (indicating Job ID J43093 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

What you will do:

As a HVAC Sales Engineer, you will execute sales strategies to achieve profitability and growth objectives and sets priorities to ensure customer satisfaction in business delivery objectives. Drives sales figures through tenders by developing and maintaining relationships with customers/contractors and interacts with them frequently and ensure a commitment to customer satisfaction.

How you will do it:

• Work with BOD, Service, COE and Product teams in providing selections and quotations to consultants/customers/contractors
• To support consultants in chiller/airside selections prior to tender roll out (BOD)
• To develop relationships and quote to contractors tendering for HVAC contracts
• Work with internal stakeholders for equipment selection/optimization/costing
• Executing the initiatives and committing to yield total customer satisfaction and achieve the business results
• To ensure the success of the Key Performance Indicators (KPIs) and Sales Plan objectives to his/her business segment within the sales department
• Maintain existing customer base and develop new customer base to ensure continuous business growth
• Maintain constant field intelligence and feedback pertinent information on competitors’ activities, product, prices, business performance and promotional programs
• Foster strong customer’s relationship with all customers enabling the company to achieve profitability and excellent payment collection position at all times

What we look for:

• Diploma or Degree in Engineering, preferably in Mechanical Engineering (open with fresh grad)
• Knowledge in chillers & airside a plus
• Fluent in windows software

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

Job Description:

• Check drawings, specifications and contracts to understand project requirement
• To coordinate with sub-contractor for daily work
• Supervise progress and coordination on site
• Coordinate with RE/RTO and conduct the site inspection

Job requirement:

• Diploma in Civil Engineering or equivalent
• Contract basis
• 5.5 days' workweek
• Project site located at Tuas
• Only Singaporeans

Responsibilities:

• Supervise and lead a team for maintenance and overhauling jobs, including mechanical, diesel and air-conditioning onboard vessels or in workshop
• Inspect pre-service, disassembly, assembly and pre-delivery of all mechanical equipment.
• Plan and coordinate with customers and suppliers on works to be carried out
• Prepare, coordinate and monitor work schedule
• Manage daily manpower deployment
• Perform site inspection and work discussion
• Assess and ensure safety requirements and permits are strictly followed
• Provide logistic support e.g indent of spares and follow up

Requirements:

• Diploma in Mechanical or Marine Engineering
• Able to deal and communicate with stakeholders effectively at all levels
• Possess man-management experience to supervise and deploy workers
• Possess high level of initiative
• Able to work under pressure
• Proficient in MS Office
• Willing to work in Changi area

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description:

- Raise Purchase Requisitions for direct materials for production

- Monitor Purchse Order and the timely deliveries of raw materials and components to meet production plan

- Monitor production output for production.

- Create lot allocation for production

- Create and maintain production orders for production tracking to meet delivery

- Maintain traceability record

- Track material usage and allocation

- Perform Cycle count, create packing list and filing

- Printing of Route Card and Job card

- General Ad-Hoc task assigned by the Supervisor.

Job Requirements:

- Diploma / Degree in related fields

- Proficient in Microsoft Office (Words / Excel)

- Knowledge in SAP is preferred

- Possess good communication, interpersonal, and organizational skills

- Good team player

Job Description:

- Process support on the improvement, upgrading & troubleshooting of processes and machines. The process includes cold forming of steel and aluminum parts, heat treatment of aluminium & steel parts, anodizing, zinc phosphating, spray painting, CNC machining, etc.

- Support the production controllers on the scheduling of production.

- Prepare & review new process sheets, in addition to maintenance & updating of existing process sheets.

Reviewing & approving MITE for calibration of gauges, measuring instruments, machines, etc.

- Establish processes for new production parts together with the other engineers.

- Plan and coordinate tests to establish new sources of materials such as steel, aluminium, chemicals, etc.

- Design support for the R&D team on the development of new parts for ease of manufacture.

- Design & draft of cold forming tooling & gauges.

- Provide technical support for supplied parts, fabricated tooling, etc.

- Oversee and coordinate the procurement of new machines, new automation and new equipment together with the procurement department.

- Up keeping and updating of the current plant layout drawings and planning of new plant layout.

- Ad Hoc duties assigned by the superior.

Job Requirements:

- Degree in any engineering feilds

- Experience in tooling design, gauge design, jigs & fixtures design, process engineering &/ or automation in a manufacturing environment will be an advantage.

- Basic knowledge in GD&T & proficiency in AutoCAD & Solidworks will be an advantage.

- Experience with Kaizen methodology will be an advantage.

- Proficiency in Microsoft PowerPoint, Excel & Words preferred.

- Experience in conducting trouble shooting & problem analysis of manufacturing process will be an advantage,

- Willingness to travel and work overseas on short term basis, will be preferred.

• Lead a team of mechanics in the repaif of MAN engines
• Trouble shoot and advice on electrical /mechanical systems problems and carry out triuble shooting on engine problems
• Assist the Service Manager / Asst Manager- Repaid in coordinating subcontractors of mechanical / electrical works
• Advise customers on the service, maintenance and repair of engines and ship system affecting the engine
• Answer all technical enquiries from customers as assigned by the Service Manager / Asst Manager-repair
• Carry out any other work as directed by the Service Manager/ Asst Manager - repair