As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

The L1 IT Support Engineer (IT ServiceDesk) is accountable for providing a high level of satisfaction among students and staff by providing first-level support for all GESS standard software and hardware. This position entails the diagnosis and assessment of end-users' technical requirements, utilizing sound discernment to promptly address and resolve any issues that may arise.

The engineer's responsibilities encompass the identification, investigation, and resolution of technical issues, as well as the prompt and effective response to support requests from students and staff through in-person, email, and phone interactions. It is anticipated that they will document, chart, and monitor all issues to ensure that they are resolved in a timely manner.

Additionally, they may occasionally offer technical training and support to GESS personnel and students. The engineer is instrumental in ensuring that the team remains dedicated to providing exceptional support and satisfaction, and it is imperative that they adhere to the GESS values and expectations for customer service.

Furthermore, they may be obligated to oversee initiatives as necessary, thereby facilitating the continuous enhancement of technology services and support strategies within the educational environment.

Key Accountabilities

First-Level Troubleshooting and Support:

· Provide initial troubleshooting by guiding users through in person, via email and IT ticketing system, and over the phone while also offering remote desktop support using Remote Desktop Software.

· Deliver quality service to students and staff in all assigned tasks, consistently upholding GESS values.

· Ensure timely and effective solutions for any technical issues that may arise with GESS technology.

Incident Management:

· Log and track support calls in the designated GESS system(s).

· Prioritize and escalate tickets as required to maintain high levels of customer satisfaction.

· Identify trends in support calls and develop documentation to address frequently occurring issues.

Communication and Reporting:

· Report problems and issues promptly, notifying management of any increasing trends, unusual activities, or repeated issues.

· Provide regular updates to customers on the status of ongoing resolution efforts.

· Attend daily and weekly meetings as requested or required to stay informed and aligned with team objectives.

Continuous Improvement:

· Recommend improvements for technology or systems, including procedural steps, increased training, and enhanced documentation.

· Access and utilize software updates, drivers, knowledge bases, and FAQs to assist in resolving end-user issues.

Collaboration and Support:

· Assist other teams in initiating, designing, and managing effective support solutions as required by the school’s needs.

· Collaborate with internal second-level support and departmental tech teams (Divisional Tech Help Center) for escalated or reassigned tickets.

Technology Development and Testing:

· Support the development and testing of new technologies to ensure operational integrity and functionality.

· Proactively communicate ideas, expectations, and goals while working with others to achieve desired outcomes.

Service Level Agreement (SLA) Management:

· Follow up on tickets approaching SLA deadlines to ensure timely resolution and avoid SLA failures.

Other Duties:

· Perform additional tasks as assigned by the Director of Technology, adapting to the evolving needs of the school environment.

Knowledge and Experience

Education:

· Diploma in Information Technology, Computer Engineering, or Business Information Technology.

Technical Skills:

· Proficient in Windows OS and Apple products.

· Experience with Microsoft Office 365 and computer troubleshooting.

· Knowledge of Mobile Device Management (JAMF or Intunes) is a plus.

· Familiarity with ID Card and digital signature systems is advantageous.

Experience:

· At least three years of IT support experience, preferably in an educational environment.

Soft Skills:

· Strong customer service orientation and effective communication skills.

· Positive attitude, initiative, and the ability to work independently and under pressure.

· Team player with a cooperative mindset.

Adaptability:

· Willingness to learn and adapt to new technologies and evolving IT environments.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Senior Testing Engineer

As part of IME’s Photonics & Sensors Department, the candidate will take lead for the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices
• Manage photonics laboratory including facilities management, health and safety, equipment calibration, inventory and stocktake
• Take on procurement duties for laboratory equipment and consumables
• Prepare technical presentations for internal meetings

Qualifications:

• Bachelor’s degree in Physics, Electronic/Electrical Engineering or equivalent
• Experience in optical/photonics device testing
• Experience in experimental data acquisition and analysis
• Critical thinking and problem solving ability
• Strong skills in communication and providing technical presentations
• Values teamwork and fostering a collaborative spirit
• Skillset in programming or instrument automation is a plus

Job Scope:

a. Perform soldering of PCBA with microscope;

b. Assist in SMT basic setup (OJT to be provided) e.g., Kitting Process, Tape and Reel Feeder loading, In-Process Checks; and

c. Cleanroom working environment, with donning of ESD apparels such as smock, shoes, hairnet, mask.

Requirements:

a. Basic manual soldering experience, with understanding of electronic and PCB Board, soldering processes;

b. Education level N level and above; and

c. Able to converse and understand assembly instructions written in English.

Training:

a. Training will be provided for successful candidates to perform his/her job scope.

* Soldering of through-hole and surface mount soldering

* Rework method

* SMT preparation

The working hours are as follows:

Mondays to Thursdays: 8.30am to 6.00pm

Fridays: 8.30am to 5.30pm

Meal Breaks: 1 hour

The basic monthly salary will commensurate with the shortlisted candidate’s work experience, negotiable.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

At InnoEdge, we work with organisations to protect them from cyber threats. We help detect new unknown cyber threats through research, fortify networks, and defend critical information infrastructures. Based in Singapore, our team consists of cybersecurity experts who use the advanced techniques and technologies to deliver cutting-edge solutions and services.

InnoEdge believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Collaboration is key to our success. We prioritise open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Responsibilities:

• Design, build and deploy high performance web applications and APIs
• Design client-side and server-side architecture
• Build the front-end of applications through appealing visual design
• Develop and manage well-functioning databases and applications
• Write high-quality code with unit, functional and end-to-end tests
• Perform architectural/technical design, technical prototyping, development, and reviews
• Communicate and negotiate technical solutions and architectural designs with diverse stakeholders
• Lead technical work and integration efforts across teams and products
• Staying abreast of developments in web applications and programming languages
• Provide technical mentorship to junior staff in the team.
• Perform occasional travel to remote sites to assist the support engineer in troubleshooting, or to accompany the product manager as a pre-sales engineer

Requirements

• At least 5 years of hands-on experience in modern web apps using JavaScript/Java/python or relevant experience in a software development team where the product goes into production
• Be a team player with good communication skills
• Demonstrate ability in full stack deployment of web applications
• Experience in designing and implementing RESTful API design
• Experience in the software development using agile SCRUM
• Experience in the following web application framework software / solution stack:

o Java Spring Boot

o ReactJS (knowledge of VueJS would be considered a bonus)

o Python

o Shell scripting

• Experience in the following would be a bonus:

o Git/Github, Elasticsearch, and Kibana

o Experience with threat hunting, Snort, and Arkime domains

o RHEL hardening expertise

o Networking skills, including configuring switches as network brokers

o Docker containers, development of CI/CD pipeline

o Designing and implementing microservices architecture

If you meet these qualifications and are passionate about software development and cyber security, we encourage you to apply for this exciting opportunity. We offer competitive compensation, a comprehensive benefits package, and a collaborative and dynamic work environment.

Job Summary:

As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existingdrawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform thefunction inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of ten (10) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skills:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

JOB SUMMARY:

The Applications Engineer is responsible for promoting the sale of the Division’s products which requires engineering knowledge sufficient to make judgments involving applications, installations, and economic consideration, as well as, handling all customer and distributor inquiries requiring technical assistance.

ESSENTIAL DUTIES & RESPONSIBILITIES:

This job description represents the primary areas of responsibility; specific position assignments will vary depending on the needs of the proposal department.

To perform the job successfully, an individual must be able to execute each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Essential duties and responsibilities should be listed in the order of importance/majority of time spent.

• Primarily responsibility is to support sales in the quoting, designing, and costing of solutions to customer problems, including prompt responses to inquiries and questions.
• Handles application inquiries and recommends appropriate products with a high sense of urgency and in a timely manner.
• Provides quotations, both written and verbal, in accordance with ERP and company price lists, electronic quote tool and contractual discount schedules; performs necessary follow-up.
• Assists customers with troubleshooting problems, handles customer complaints, and solves problems in a prompt, professional manner; may be involved in investigating and reporting on warranty claims and return goods authorization (RGA) process.
• Performs costing analysis, when necessary, on product line items versus published pricing to arrive at gross margin calculation for review and approval by Applications and Sales Managers
• Coordinates customer delivery requirements with the Production Department
• Recommends modifications to standard products to meet individual customer requirements, within practical company and economic limitations.
• Takes necessary actions to increase sales of the Division’s products.
• Represents, on occasion, and if necessary, the division at trade shows as well as potential visits to customer for sales or service-related activities.
• Assists in creating marketing literature, website development and other system tools to boost productivity and sales.
• Performs other duties of a similar nature and level as assigned.

EDUCATION AND EXPERIENCE:

• Bachelor of Science degree in Engineering or equivalent experience with plant emission control design
• 2-3 years of experience developing system design for nuisance dry particulate collection for industrial manufacturing processes
• Understanding of EPA emissions requirements is preferred.
• Experience working with materials used in corrosive and/or high temperature environments.
• Experience working with technical specifications is preferred.
• Understanding of the physics of gas flow is preferred.
• Knowledge of fans and process systems is preferred.
• Experience developing cost estimates and proposals for engineered equipment systems.
• Experience working with pollution control and product recovery equipment is preferred.
• Experience managing equipment design and supply projects is preferred.

Key Responsibilities:

• Overseeing projects at one or multiple stipulated sites.
• Assist project manager is the execution of the projects.
• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.
• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.
• Monitor and ensure progress of works are carried out according to project specification.
• Design schematic drawing, layout drawing, P&ID drawing.
• Review and check drawing before submit to main contractor.
• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.
• Support project manager in the administration of contract, claim, variation and any dispute arise.
• Raise MR and order material & arrange manpower for necessary works.
• Advise site team for work schedule and technical issues.
• Make sure project is carried out according to schedule.
• Responsible for site supervision and implementation.
• Responsible for ensuring implementing safety measures.

Requirements:
- Minimum diploma
- 3 years or above experiences in ACMV, especially in air-conditioning industry
- Able to use AutoCAD or other related software for ACMV Design
- Able to communicate Fluent in English
- Minimum 3 years in ACMV Sector

We're seeking a seasoned Senior Software Engineer to design, build, and integrate complex software components. As a Senior Software Engineer, you'll play a key role in delivering quality solutions and harnessing emerging technologies to drive business value.

Key Responsibilities

• Design, develop, and maintain complex software components, adopting design thinking and customer-oriented approaches.
• Build prototypes and design system architectures to demonstrate technology opportunities.
• Collaborate with cross-functional teams to deliver enterprise engineering products in a fast-paced environment.
• Provide technical consultancy and expertise in the systems development process, contributing to defining technical specifications and configuring solutions.
• Stay updated on emerging technologies, such as Artificial Intelligence, to drive business value and enhance service experience.

Requirements

Essential Qualifications

• Relevant qualifications in Computer Science, Information Systems, Computer Engineering, or related fields.
• Good knowledge of Agile software development, DevOps, and cloud technologies.
• Experience in modern web and application technologies (e.g., Nuxt JS, Vue JS, Node JS, Next JS).
• Excellent analytical and problem-solving skills.

Nice to Have

• Past experience working with Ruby on Rails.
• Experience in architecting and developing solutions to complex and ambiguous problems.
• Strong communication and interpersonal skills.
• Past work experience in large software teams.

We're seeking a skilled Engineer, Quality Assurance to join our team in Singapore. Reporting to the Engineering Manager, you'll play a critical role in ensuring the quality assurance aspects of our technical areas.

Key Responsibilities

• Participate in our shift-left testing process and entire Software Testing Life Cycle (STLC) to ensure high-quality products.
• Collaborate with Product Managers to define, test, and validate product requirements.
• Design, execute, and automate tests for web applications and backend APIs, ensuring comprehensive coverage.
• Produce detailed test reports and serve as the sign-off authority for feature releases.
• Work closely with Development teams to identify and resolve issues, ensuring seamless collaboration.
• Contribute to the evaluation and adoption of testing automation frameworks.
• Mentor junior QA engineers, sharing expertise and promoting growth.

Essential Qualifications

• Bachelor's or Master's degree in Computer Science or a related field.
• Excellent communication skills, with the ability to explain technical concepts to diverse audiences.
• 2-5 years of experience in web application testing and automation.
• Strong foundation in Software Engineering concepts and STLC life cycle.
• Ability to write test plans and test strategy documents.
• Good knowledge of API and Web testing, Networking, and Operating System concepts.
• Strong troubleshooting, debugging, and analytical skills.

Preferred Qualifications

• Experience with testing automation tools.
• Background working in product companies.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Join our R&D team within Chemtech division in Singapore as Electrical and Instrumentation Technician/Engineer.

Your main tasks and responsibilities:

• The job holder is responsible for the execution of preventive maintenance, troubleshooting, repairs, and maintenance of all pilot plant facility as well as maintaining the calibration program of all instruments.
• Develop electrical and instrumentation systems tailored for ATEX or IEC classified environments. This includes designing control panels, crafting intricate wiring diagrams, and meticulously mapping out instrumentation layouts.
• Oversee the installation, commissioning, and maintenance of electrical and instrumentation systems. Troubleshoot and resolve electrical and instrumentation issues to minimize downtime and ensure safety. Conduct routine inspections and preventive maintenance on electrical and instrumentation equipment.
• Ensure all electrical and instrumentation systems adhere to relevant safety standards and regulations. Participate in safety assessments and develop strategies to mitigate risks associated with electrical and instrumentation systems.
• Maintain accurate documentation of electrical and instrumentation designs, configurations, and maintenance records. Prepare technical reports, drawings, and documentation for internal and external stakeholders.
• Identify opportunities for process optimization and efficiency improvement in electrical and instrumentation systems. Stay updated on industry trends and emerging technologies to recommend upgrades and improvements.

To succeed in this role, you will need:

• Diploma or Degree in Electrical Engineering with relevant experiences in pharmaceutical, chemical or petrochemical industries.
• >7 years for Diploma or 3-5 years for Degree experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• •Hands-on experience in ATEX or IEC environment, preventive maintenance, troubleshooting, repairs, maintenance of automation and equipment, as well as maintaining the calibration program of all instruments.
• Ability to conceptualize and provide design for electrical, instrument and control wiring diagrams.
• Requires skills in analyzing malfunctions in control systems and making appropriate repairs. This includes troubleshooting PLCs, field sensors, control wiring, general I/O wiring, & networks/communications wiring.
• Requires skill in the use of technicians' tools such as electric meters, oscilloscopes, calibration devices, electronic testers, etc.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• Proficiency in AutoCAD or other relevant design software.

Location: We are based in Cleantech 3 (This role is for our new R&D Test Centre)

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable

Quantitative Product Development Engineer (Trading)

Job Responsibilities:

• Actively participate in the development and maintenance of equity and futures products, ensuring consistent improvement in online service quality through technical solutions, and take responsibility for the reliability of live trading.
• Collaborate closely with researchers to enable various strategies, regardless of type or scale, to operate efficiently in live trading and generate substantial returns.
• Conduct research and integration of programmatic trading platforms, including implementing and deploying microsecond-level software solutions.
• Optimize the performance and latency of trading and order execution systems across dimensions such as computation, storage, networking, and hardware.

Job Requirements:

• Bachelor's degree or higher in Computer Science or a related field from a well-known domestic or international university, with over 2 years of work experience.
• Proficient in Linux operating systems and meet at least one of the following:a. Skilled in C++ and one scripting language.
  b. Skilled in Python 3 and one statically-typed language.
• Familiarity with production and iterative processes for online services, along with techniques for improving service reliability.
• Experienced with best practices such as Git, code review, and CI/CD, with a strong focus on tool-building and excellence in execution
• Experience in maintaining large-scale, highly complex, mission-critical products.Strong system design skills with expertise in performance, reliability, and availability.Hands-on development experience in any of the following areas: operating systems, databases, storage systems, or distributed systems.

Regret to inform that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R1878287

Business Registration Number: 201735941W.

Licence Number: 18S9037

Responsibilities

• Collaborate with sales and software engineering teams to evaluate and identify optimal cloud solutions for customers.
• Migrate on-premises workload to Cloud Service Providers.
• Plan, design and develop cloud infrastructure necessary to support Anacle's software applications.
• Monitor cloud systems for optimal performance and establishes and monitors best practices, policies, and procedures.
• Identify, analyse, and resolve infrastructure vulnerabilities and application deployment issues.
• Perform vulnerability / security updates and firmware patches.
• Configure and monitor the statuses of backups and perform disaster recovery when required.
• Configure and monitor health statuses of cloud components and respond to monitoring alerts appropriately to ensure continuity in customers' software applications.
• Prepare system architecture documentation.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor’s Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Experience with cloud technologies – AWS, Azure, or Google Cloud
• Fresh graduates, or anyone with relevant working experience
• Good background in Operating System administration for Linux/Unix and/or Microsoft Windows Server.
• Proficient in networking concepts (e.g., DNS, TCP/IP, and firewalls)
• Hands on experience in managing public cloud including developing and deploying large, scalable production applications on cloud/Iaas, Paas platforms and Containers. Experience with Docker and Kubernetes is a plus.
• Working knowledge of DevOps software development tools and methodologies is an advantage.
• Cloud service providers’ certification will be a plus
• Able to work after office hours depending on project needs
• Able to handle multiple tasks and priorities using effective organisational and time management skills.
• A good team player who is able to work in a fast-paced environment.

We regret that only shortlisted candidates will be notified.

Qualification (s) – BE/ BTech/ MTech/MS/ PhD

Domain - Electronics, Electrical, Computer Engineering or Computer Science Engineering.

Experience – Fresh Graduate Diploma with 0 to 2 years experence including IHL and Singapore Polytechnics Graduate with EEE qualifications.

Job Description –

RTL coding and module-level verification of digital IC circuit blocks

Assist DV engineering team for system-level verification and debug

Assist in creating and maintaining design documentation

Assist in the completion of sign-off GDSII working with DFT and PD engineering teams.

Requirement –

Highly motivated and driven to solve challenging design problems

Able to read and understand the architectural specifications at the sub-

system/chip level

Comprehend the Power-Performance-Area trade-offs in the development of micro-architecture

Proficient with at least one programming language

Preferred experience –

Concentration/major in IC Design

Hands-on experience in digital IC design

Knowledge of industry Protocols – PCIe, NVMe, USB4.0, DDR, AXI, CHI, AHB, MIPI, Display port, Ethernet etc.

Design Techniques – Low-power, UPF, Clock Domain Crossing (CDC),

Booting/Reset Flow

Proficient in a scripting languages – Shell scripting, Python, Tcl, PERL etc.

Job responsibilities

1. Responsible for Physical Design for Full chip/Blocks covering Floor planning, Placement, Area Optimization, Clock tree synthesis, Placement optimizations, Routing, Timing Closure, power network design, Voltage drop analysis, RC extraction, etc.

2. Be a highly-valued member of our start-up like team through excellent collaboration and teamwork with other R&D Engineers.

3. Work with Frontend team to understand the RTL design and drive physical aspects early in design cycle for physical design closure.

Job requirements

1. Bachelor's degree or above, major in Microelectronics / Electronic engineering / Communication engineering and other related fields.

2. More than 3 years working experience in layout and wiring of 40 nm and below technology.

3. Able to independently complete the whole chip P&R process and IR_ Drop, STA, low power inspection.

4. Familiar with TCL or Perl and other scripting languages.

5. Familiar with design flows and EDA tool software.

6. Familiar with Sign-off methodology and the use of EDA tool software in STA / power.

Job Description: Semiconductor Process Integration Engineer

Position Overview: We are seeking a highly-skilled Process Integration Engineer to join our team. The primary responsibility of this role is to develop and deliver advanced process modules with our partner foundry facilities for optoelectronic integrated circuits (ICs). The ideal candidate will have a strong background in semiconductor process technology and a proven track record of working effectively with external partners.

Key Responsibilities:

1. Process Development: You will join an existing team to design and develop semiconductor process flows to for a proprietary CMOS + III-V monolithic integration platform. You will integrate various process modules into a cohesive manufacturing process, optimizing for performance, yield, and reliability.

2. Collaboration with Fab Partners: You will be responsible for management of projects under your purview with one or more fab partners, including aspects such as budgeting, schedule and resource planning. You will work closely with fab partners to develop, optimize, and implement process modules for optoelectronic ICs, ensuring compatibility with fab partner manufacturing protocols. You will provide technical support and feedback to fab partners, troubleshooting process-related issues and implementing corrective actions. You may also be embedded within the fab partner’s team for specific durations during critical phases of the process development effort.

3. Data Analysis: You will analyze process data to identify trends, root causes of issues, and opportunities for process improvements. You will also design experiments and test plans to retire technical risks and resolve process issues. You will also be responsible for maintaining detailed documentation of process development activities, including process flows, specifications, and test results.

Qualification (s) – BE/ BTech/ MTech/MS/ PhD

Domain - Electronics, Electrical, Computer Engineering or Computer Science Engineering

Experience – 04 to 10 years

Highly motivated and driven to face the challenging design

problems

Architecture and Micro-architecture of complex digital SoCs

and mixed signals SoCs

Be able to communicate with system architects and decipher

system requirements and develop architectural specification of

the SoC

Understanding the future market requirements and develop

micro-architecture for the silicon to serve multiple generations

of market is a big plus.

Be able to micro-architect the chip considering low power and

high-performance techniques

Complete sign-off GDSII working with DV, DFT and PD

engineering teams.

Be able to comprehend usual service level agreement features

–

Power, Performance, Area and Customer Schedule, andaccordingly plan the development.

Preferred Expertise:

Architecting, micro-architecting and designing SOC for

embedded processors for storage, IoT, security and compute

applications

Functional safety, power management, coherency, security

Protocol knowledge - PCIe, NVMe, USB4.0, DDR, AXI, CHI,

AHB, MIPI, Display port, Ethernet

Design Techniques – Low-power, UPF, Clock Domain Crossing

(CDC), Booting/Reset Flow SW and/or hardware validation

Scripting Languages – Shell scripting, Python, TCL, PERL etc.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

About the Centre for Quantum Technologies (CQT)

The Centre for Quantum Technologies (CQT) in Singapore brings together physicists, computer scientists and engineers to do basic research on quantum physics and to build devices based on quantum phenomena. Experts in this new discipline of quantum technologies are applying their discoveries in computing, communications, and sensing.

CQT is hosted by the National University of Singapore. The Centre also has staff at the Agency for Science, Technology and Research, Nanyang Technological University, Singapore, and the Singapore University of Technology and Design. With some 200 staff and students, it offers a friendly and international work environment

Learn more about CQT at www.quantumlah.org

Job Description

The Centre for Quantum Technologies (CQT), National University of Singapore is looking for researchers and engineers to develop next generation quantum computers based on trapped ions. There are multiple positions available at different levels with a diverse set of expertise. This program is funded under the National Quantum Processor Initiative, a flagship program under the National Quantum Office Singapore. The aim of the program is to develop a full stack quantum processor based on Yb-Ba ions. This program brings together the unique capabilities of the existing ion trap groups in CQT expertizing on these two-ion species to explore scalability of the system.

The Centre for Quantum Technologies is a pioneering quantum centre in the world offering a diverse research culture at the intersection of three different fields namely, theoretical, experimental Physics and computer science. We offer competitive salary and enriching intellectual experience in a city state known for its forward outlook. This program also allows strong collaboration with leading academic and industrial groups within and outside the country.

The team members will work to build electronics to control the ion trap quantum processor. That includes digital design, RF and microwave sources and low noise analog / digital front end. The ideal candidate should have practical experience in at least one of the following fields and desire to cross the boundaries and learn relevant skills.

The successful candidate will be involved in all stages of the development cycle: collaborate with other team members to define the technical requirements, design, manufacturing, testing and integration of the prototype into the control system.

Job Requirements

We are looking for several electrical engineers to join the small team of scientists and engineers working on the next generation of the ion trap quantum processor. The candidate should have:

• Bachelor or Master degree in electronics, electrical engineering or related fields;
• At least 1-2 years of experience in electronics design is preferred;
• Experience in programmable digital logic design using Verilog or VHDL, digital signal processing, and familiarity with control theory;
• Design and characterisation of low noise electronics for the analog front end, good understanding of the noise sources in electronic circuits;
• Design and implementation of the RF electronics circuits.

Job Description

• Develop verification plans based on design-related documentation, set up the verification environment, and complete verification from module level to system level.
• Execute regression testing and enhance verification coverage.
• Collaborate with chip design engineers to identify and resolve design defects.
• Guide the design team in implementing a verification-friendly design flow.
• Perform RTL-level, gate-level, and low-power verification with UPF (Unified Power Format).
• Assist FPGA engineers and software engineers in completing FPGA prototype testing.
• Ensure the integrity and correctness of chip designs from multiple dimensions.

Requirements

• Bachelor’s degree or higher in Computer Science, Electrical Engineering, Communications Engineering, or related fields. 3+ years of work experience.
• Experience in design or verification of peripheral modules, communication modules, or SoC systems.
• Proficiency in Verilog and expertise in C/SystemVerilog.
• Knowledge of one or more scripting languages such as Python, Ruby, Perl, Shell, Tcl, or Makefile.
• Experience with UVM (Universal Verification Methodology) is a plus.
• Familiarity with the digital chip development process and successful tape-out project experience is an advantage.
• Experience with formal verification is a plus.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Lead, oversee, and plan the development of autonomous vehicle learning platforms.
• Identify and develop autonomous vehicle hardware and software stacks.
• Actively drive projects to improve existing platform features and add new features to complement and expand the capabilities of the system.
• Engage and mentor Master’s and Undergraduate students as well as industry attachment interns.
• Collaborate with other research engineers and coordinate various activities at the Advanced Robotics Centre.

Qualifications

• Bachelor’s degree in engineering related to robotics field.
• Familiar with vehicle structures, electronics, vehicle kinematics and dynamics.
• Experience with autonomous vehicles Drive-by-Wire (DBW) systems and control.
• Proficiency in CAD/CAM and fast prototyping.
• Familiar with open-source autonomous driving frameworks such as Apollo, Autoware, etc.
• Proficiency in robotics middleware and simulation tools (ROS, Gazebo, Carla, SUMO, Carsim (preferred)).
• Experience in C/C++ and Python development.
• Experience in autonomous vehicles and robotics full-stack development is preferred.
• Experience in remote control system development is preferred.
• Highly motivated individual who can work in a fast-paced environment.
• Meticulous organizer with a positive and can-do attitude.
• Strong team player with the ability to lead projects.
• Good communication, writing and presentation skills.