Unified Communications (UC) Engineer/Analyst

Job Description:

• Primary handling voice incidents escalations
• Configuring and troubleshooting of CUCM, CME, Cisco Unity Connection, Cisco Unified CCX, Cisco IP Phones, Cisco IP Communicator, Cisco Jabber, Cisco Voice Gateways (SIP, H323, MGCP)
• Configuring Cisco IP Phones, Expansion Modules, Extension Mobility Profiles, Voicemail, Cisco Jabber, Cisco IP Communicator.
• Upgrading IP Phone firmware in CUCM and CME to fix vulnerabilities.
• Monitoring alerts, collecting traces and debugs for voice incidents involving call flow issues.
• Remediating all endpoints, gateways and servers and making sure all are 100% compliant.
• Engaging Cisco TAC and working along with them to resolve complex incidents.

Job Requirements:

• Degree / Diploma in computer or Electronics Engineering
• CCNP Cisco Collaboration certification
• Minimum of 14+ years of related IP telephony / Unified Collaboration /Telepresence implementation or Administration experience including some of the following:

-Knowledge with TELISCA Call Recording troubleshooting

-Setup & maintenance of Cisco Collaboration and meeting products such as CUCM, CUC, IMP, CMS, TMS.

-Capable to install, integrate, maintain, modify, improve, enhance and upgrade the hardware and software of the Cisco Collaboration products

-Experience in administration of Cisco UC servers in Cisco UCS platform

-Experience in setup & troubleshooting of H323, SIP Trunks, SCCP, MGCP Voice Gateways, etc

-Experience in Cisco IP Phones

-Experience in integration with AD, DNS, LDAP etc…

-Experience in Single Sign-On (SSO) setup and troubleshooting.

-Knowledge in Routing, Switching and Security

-Knowledge in Server, Local and Group Policy, User management, Services, etc

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• Calculate total daily production quantity output and check balance quantity per plan order.
• Encode transfer note finished goods (FG) and work in process (WIP) to the MRP.
• Daily checking of the part inventory stock on the MRP.
• Record the quantity of incoming insert that will use in the production.
• Prepare percentage planning yielding weekly report and percentage production efficiency weekly report.
• Prepare report on daily rejection part and record in the non-conforming report.
• Coordinate with the planner regarding production plan of the production.
• Prepare material weekly inventory.
• Prepare label that will use in the production.
• Prepare overtime and leave form of the production personnel and submit to HR department.
• File production related document like part samples, sample approval form and injection molding parameter data to the filing cabinet.
• Withdraw production office supplies every week in the administration office.
• Follow ISO 9001, ISO 13485 and safety rules and regulations.
• Implement 5S and good housekeeping in the production area.
• Performs other tasks assigned by his supervisor to achieve department objective.

Requirements:

• At least secondary level can write and speak simple English.
• At least 6 months experience in clerical works.
• With basic knowledge in computer MS office.

Job Responsibilities:

• Manage day to day operation based on inventory needs, new product introduction, equipment efficiency and resource optimization while maintaining GMPs compliance.
• Streamline company’s production process in order to maintain an efficient and effective team.
• Perform Quality Measures of staff performance.
• Assist in Internal Quality Audits (IQA).
• Plan, organize, direct and control of daily production with production supervisor.
• Evaluate, improve product quality, production efficiency, work procedures and safety enhancement in accordance to food safety and GMPs.
• Manage cost performance and be responsible for daily production yield and output.
• Staff development and improve staff competency.
• Preparing monthly production report, provide support for new product launch and to review documents and reports.

Job Requirement:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in any field.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Senior Executive specialized in Manufacturing/Production Operations or equivalent.
• FMCG / Food Manufacturing experiences will be advantage
• Knowledge of ISO22000:2005, BRC issue 8, HACCP
• Knowledge of Business Central 365 (Microsoft Dynamic Navision)
• Microsoft office (excel, powerpoint, outlook)

Interested applicant may send your cv/ resume via whatsapp 84597671

What you’ll do:

• Familiar with the latest authorities’ design codes, specifications and requirements as well as submission procedures
• Responsible for project management, design coordination and contract management
• Undertake design and study of civil infrastructure work of road work, Sewerage, permanent and temporary traffic, drainage and utilities
• Able to be the design lead communicating and liaise with client and authorities while managing the team members design deliverable of drawings and reports.
• Able to liaise and coordinates with other design discipline/departments as well as managing sub consultants in preparation of drawing and reports for submission
• Able to communicate with clients and approving agencies for purposes of obtaining design information, presenting design intent and options and expediting approvals
• Able to supervise the team and carry out independent review of submission documents

The role involves conducting thorough research to support the production of high-quality video content, from documentaries and series to news package. The ideal candidate will have a passion for storytelling, a keen eye for detail, and the ability to work effectively in a fast-paced production environment.

Responsibilities:

1. **Research & Content Development**:
- Conduct in-depth research on various topics, including historical events, industry trends, and target audience preferences.
- Gather information from credible sources (articles, books, archives, interviews, etc.) to support video concepts and scripts.
- Compile background materials, facts, and data to enhance the accuracy and relevance of video projects.
- Collaborate with writers, producers, and directors to ensure that research aligns with creative and production goals.

2. **Script Support**:
- Assist in the story development by providing accurate and engaging research material.
- Fact-check scripts to ensure historical and factual accuracy, making necessary corrections as needed.
- Identify potential experts, interviewees, or locations relevant to the project.

3. **Content Sourcing**:
- Identify and source appropriate stock footage, images, music, and other visual/audio elements for production.
- Work with external libraries, archives, and rights holders to secure permissions for third-party content.

4. **Pre-Production Assistance**:
- Research and recommend filming locations, including coordinating logistics such as permits and local resources.
- Prepare briefing documents and reports to support the production team during pre-production planning.
- Help identify potential interview subjects or contributors relevant to the content.

Skills Required:

- Strong research skills with the ability to synthesize large amounts of information into concise, usable formats.

- Excellent communication and writing skills, preferably in both English and Chinese.

- Detail-oriented with a focus on accuracy and consistency.

- Ability to manage multiple projects simultaneously and meet tight deadlines.

- Familiarity with video production processes, including pre-production, production, and post-production.

- Proficient in using research tools, databases, and software (e.g., online archives, video databases, etc.)

We’re searching for an Infrastructure / System Engineer to be part of our diverse team of talents here at NCS!

If you believe in going above and beyond, want to exemplify the best, and wish to bring people and technology together like never before, then we would love to have a conversation with you!

Overview

We are seeking an experienced Infrastructure Engineer to join our Infra team that is providing critical operations and maintenance for an enterprise customer. The ideal candidate will have advanced expertise in VMware Virtualization, Windows Server 2016/2019, Veritas NetBackup, Red Hat Enterprise Linux (RHEL), and SAN storage. This role is essential for ensuring the stability, reliability, and performance of the customer’s IT infrastructure.

What we seek to accomplish together:

1. VMware Virtualization:

• Design, deploy, and manage VMware virtual environments.
• Perform advanced troubleshooting and optimization of virtual infrastructure.
• Ensure high availability and disaster recovery configurations for virtualized environments.
• Conduct regular health checks and performance tuning of VMware systems.
• Perform regular updates, patching, and security hardening for VMware environments.

2. Windows Server Administration:

• Manage and maintain Windows Server 2016/2019 environments.
• Perform regular updates, patching, and security hardening.
• Implement and manage Active Directory, Group Policy, DNS, and DHCP.
• Troubleshoot and resolve server related issues to ensure optimal performance.

3. Veritas NetBackup:

• Configure and manage backup and recovery solutions using Veritas NetBackup.
• Perform regular backups, restore operations, and disaster recovery testing.
• Monitor backup jobs and troubleshoot failures.
• Ensure compliance with backup policies and retention requirements.
• Perform regular updates, patching, and security hardening for Veritas NetBackup environments.

4. RHEL Administration:

• Install, configure, and maintain Red Hat Enterprise Linux servers.
• Perform system updates, patch management, and security hardening.
• Monitor system performance and troubleshoot issues.
• Automate routine tasks using shell scripting and other tools.

5. SAN Storage Management:

• Configure and manage SAN storage solutions.
• Monitor and optimize storage performance and capacity.
• Perform regular maintenance, updates, and patching of storage systems.
• Troubleshoot and resolve storage related issues to ensure data integrity and availability.

6. General Responsibilities:

• Participate in the planning and execution of infrastructure projects.
• Collaborate with crossfunctional teams to support application deployments and updates.
• Maintain detailed documentation of configurations, procedures, and operations.
• Provide 24/7 support for critical infrastructure components as part of an oncall rotation.
• Ensure compliance with company policies and regulatory requirements.

We are driven by our AEIOU beliefs—Adventure, Excellence, Integrity, Ownership, and Unity—and we seek individuals who embody these values in both their professional and personal lives. We are committed to our Impact: Valuing our clients, Growing our people, and Creating our future.  

Together, we make the extraordinary happen.  

Learn more about us at ncs.co and visit our LinkedIn career site. 

We handle all profiles with the highest level of confidentiality.

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Remuneration: Basic + VB

Work location: Alexandra

Job Description:

Report to the Project Director / Manager in Charged of the WTW system.

• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built
• documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Job Requirements:

• Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Specific experience in WTW system (Offshore Passenger Transfer System) is highly advantageous
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Strong leadership with problem-solving skills. Strong understanding in structural design is highly advantageous
• Ability to speak both English and Mandarin to liaise with Mandarin speaking clients
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software is highly advantageous
• Good understanding of Document Control. Knowledge of ISO9001:2015 QAM system is highly advantageous
• The candidate must be willing to travel and work in marine and offshore environment.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Summary:

• Basic up to 4.5k
• Performance bonus
• 5 days work week, 8-5pm
• Location: Pioneer
• MNC company
• Career Advancement
• Proficiency in CNC machines

Key Responsibilities:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electrical / Mechanical / Mechatronics Engineering
• Min 2 years of relevant experience in servicing CNC turning / milling machines
• Possess class 3 driving license

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Basic salary: ($3,200 - $4,500)

Location: Serangoon

Mon - Fri, 8.30am to 6pm

Job Description

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Job Requirements

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA would be highly advantageous
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

As a Senior Package Design Engineering (PDE) Central Engineering System and Analytics (CESA) Engineer, you will develop integrated solutions to empower Backend Operations to make data-driven and heuristics-based decisions. You will work across Global Operations and sites to improve Cost, Scale, Quality, and Cycle Time by defining and designing data architecture and collaborating with key partners.

Responsibilities

• Yield Enhancement (YE) lots analysisLead YE lot analysis including reconstructing fuse identififaction (FID) for traceability, statistic comparison for different group
  
• Yield modelling / pareto benchmarkingIdentify actionable opportunities from YE lots
  Develop and improve Yield Models for HBM
  Periodically improve models based on actual performance
  
• Best Known Methods (BKM) DeploymentDevelop BKM’s for YE and drive implementation
  Identify/align BKMs and monitor implementation
  Works with different teams in the identification of critical metrics

Requirements:

• PhD/Masters/Bachelors in Statistics, Mathematics, or a related field; advanced degree preferred.
• Minimum of 3 years of experience in semiconductor manufacturing or related fields
• Preferably with experienced in Package Design Engineering and Yield Enhancement
• Strong understanding and knowledge of semiconductor manufacturing processes and technologies.
• Proficiency in statistical/machine learning and statistical techniques skills will be additional advantageous;
• Experience in MRDA will be a plus
• Proven ability to make decisions, multi-task, and solve problems and address root causes.
• Exhibit critical thinking to see opportunities.
• Effective communication skills in verbal/written.
• Self-motivated. Able to work independently with minimal supervision.
• Able to travel as required to support department and company objectives.

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

Job Scope:

• Collaborating with project managers to understand project requirements, specifications, and expectations
• Participating in project planning and scheduling activities
• Inspecting construction sites regularly to monitor progress and ensure compliance with design specifications
• Implementing and maintaining quality control procedures to ensure the project meets industry standards and regulations
• Conducting tests on construction materials to ensure they meet required standards
• Collaborating with architects, engineers, and other professionals to coordinate activities and resolve design issues
• Provide technical solutions to problems encountered during the construction process
• Efficiently managing resources, including labour, materials, and equipment
• Implementing and enforcing safety protocols to ensure a safe working environment
• Conducting regular safety inspections and addressing any issues promptly
• Maintaining accurate and up-to-date project documentation, including daily reports, progress reports, and as-built drawings
• Keeping records of materials used, labor hours, and equipment usage
• Identifying and resolving construction-related issues and challenges as they arise
• Providing regular updates to project stakeholders on progress, challenges, and milestones
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Master’s degree in engineering or a related field
• At least having 2 years relevant experience in engineering or site engineering in construction industry
• Strong knowledge of construction methods, materials, and processes.
• Familiarity with relevant construction codes, regulations, and safety standards.
• Proficiency in using construction management software and tools.
• Excellent communication and interpersonal skills.
• Problem-solving skills to address unexpected challenges.
• Attention to detail and a commitment to quality.
• Able to multi-task and work under tight schedules
• Strong negotiation and problem-solving skills
• Able to face challenging tasks and meet high standards and deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 working days

We are regret that only shortlisted candidates will be notified.

Responsibilities:

1. Responsible for packaging solutions and design, defining performance criteria for signal integrity (SI), power integrity (PI), and thermal performance.

2. Optimize power performance in packaging design, focusing on PI and SI parameters.

3. Manage collaboration and technical communication with packaging and testing vendors.

Requirements:

1. Bachelor’s degree or higher in Electronic Engineering, Microelectronics, Computer Science,

or a related field.

2. Minimum of 5 years of experience in packaging design and development, or experience in

project development at a design company.

3. Strong communication and coordination skills, teamwork spirit, and resilience under

pressure.

4. Proficiency in both written and spoken English and Chinese is a plus.

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 2 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skill

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are seeking a highly skilled Senior Software Engineer with strong Solution Architecture capabilities to lead the front-end development of our small, agile team. You will work together with a group of UX Designers and UX Engineers, ensuring that our solutions are scalable, technically sound, and compatible with cross-division systems. This hybrid role requires hands-on technical leadership, architectural oversight, and an understanding of WCAG standards and accessibility best practices. This role will be offered as a 2-year contract.

A brief summary of your job responsibility:

• Lead the UX Engineers in delivering high-quality, scalable front-end code
• Ensure that development process follows best practices for maintainability, performance, security, and accessibility
• Provide mentorship to the team, reviewing code, and helping solve technical challenges
• Evaluate cross-division systems and existing infrastructure to ensure compatibility and integration of proposed solutions
• Identify potential system limitations or risks early in the design process and work with teams to address them
• Design systems and applications with a focus on reusability and long-term maintenance
• Actively participate in coding, prototyping, and developing front-end components
• Communicate technical challenges and solutions to both technical and non-technical stakeholders
• Align technical execution with business goals, working closely with the Program Manager and other team members to meet deadlines and deliverables
• Stay up-to-date with the latest AI developments, tools, and trends, and explore ways to integrate them into development processes and products

To succeed in this role, you will ideally have:

• Strong front-end development experience to guide UX engineers
• Proven experience with solution architecture, especially in evaluating system-wide compatibility and scalability
• Ability to understand and integrate solutions across different systems, ensuring they align with organizational infrastructure.
• Proven experience leading small technical teams, with a focus on collaboration and mentorship
• Strong cross-functional collaboration skills, ensuring alignment between technical execution and business needs
• Keen interest in AI technologies and familiarity with AI tools that can be leveraged to optimize development efforts
• Experience working in agile teams, particularly in lean environments where quick iterations and adaptability are key.
• Experience working on A11Y and strong understanding of WCAG standards

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.
  

As a PDE Central Process Integration Principal Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide synergy

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

JOB QUALIFICATIONS

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

As a PDE Central Process Integration (PI) Senior Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide alignment

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

Requirements

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

Keen on the role? Apply now!

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

This position is ideal for a recent graduate who is passionate about solving challenging business problems and building applications that provide an excellent user experience. As a Data Engineer, you will be an integral part of the Loyalty and Marketing development team, focusing on designing and building software solutions that leverage data to solve business problems.

The role is for a self-motivated individual with strong foundational software engineering skills. The candidate will be extensively involved in hands-on activities, including POCs, design, documentation, and development of new functionality. The candidate must be flexible and willing to switch tasks based on the team's needs.

Responsibilities:

• Assist in the design, development, and implementation of software solutions.
• Participate in the development of new products iteratively by building quick POCs and converting ideas into real products.
• Design and develop mission-critical systems, delivering high-availability and performance.
• Interact with both business and technical stakeholders to deliver high-quality products and services that meet business requirements and expectations while applying the latest available tools and technology.
• Develop code under the guidance of senior developers to ensure deliverables are on time, within budget, and with good code quality.
• Maintain a passion for delivering zero-defect code and contribute to ensuring the team's deliverables meet or exceed the prescribed defect SLA.
• Assist in coordinating Continuous Integration activities and other related items in addition to contributing core product code.
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner.