* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

We need Engineer experienced in 1 years. Responsible for all aspects of underground work including cable pulling, installing instruments & threaded rod; install CMS, trunking, tray, ladder rack, confined space entry, small power, and lighting, terminating and gladding SWA.· Examined installations and observed operations to ensure conformance to design and equipment specifications, and provided technical assistance to field personnel in the areas of high voltage distribution equipment and high voltage motors/generators Purchased and maintained office supply inventories, and always careful to adhere.

We need Engineer experienced in 1 years. Responsible for all aspects of underground work including cable pulling, installing instruments & threaded rod; install CMS, trunking, tray, ladder rack, confined space entry, small power, and lighting, terminating and gladding SWA.· Examined installations and observed operations to ensure conformance to design and equipment specifications, and provided technical assistance to field personnel in the areas of high voltage distribution equipment and high voltage motors/generators Purchased and maintained office supply inventories, and always careful to adhere.

We need Engineer experienced in 1 years. Responsible for all aspects of underground work including cable pulling, installing instruments & threaded rod; install CMS, trunking, tray, ladder rack, confined space entry, small power, and lighting, terminating and gladding SWA.· Examined installations and observed operations to ensure conformance to design and equipment specifications, and provided technical assistance to field personnel in the areas of high voltage distribution equipment and high voltage motors/generators Purchased and maintained office supply inventories, and always careful to adhere.

Job description

• Carry out Indoor Air Quality monitoring
• Carry out Industrial Hygiene monitoring
• Carry out Noise monitoring
• Preparation of test reports

Requirements

• Degree in Environmental / Chemical / Mechanical Engineering or related field / certificates
• For fresh graduates / candidates with no experience, training will be provided
• Willing to work in outdoor environment, testing and monitoring is carried out at customers premises
• Proficient in Microsoft Office
• Class 3 license preferred

Job Responsibilities

• Progressing all elements of design in-line with the Design Checklist;

• Prepare electrical tender packages including specification and drawings;

• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and to remain technically competent;

• Tendering and estimating of electrical works for projects prior to award;

• Compilation and Review of Operation and Maintenance Dossier for Projects;

• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;

• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;

• Evaluating technical submittals for specification and client requirement compliance;

• Approving Test Packs at each step of construction through to completion;

• Forwarding testing and commission passing criteria to the System Supervisor.

Job Description & Requirements

Responsibilities:

Develop software solutions by studying information needs; conferring with users; studying systems flow, data usage and work processes; investigating problem areas; following the software development lifecycle.

Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and proposed solutions

Document and demonstrate solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code

Prepare and install solutions by determining and designing system specifications, standards and programming

Improve operations by conducting systems analysis; recommending changes in policies and procedures

Update job knowledge by studying state-of-the-art development tools, programming techniques and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations

Protect operations by keeping information confidential

Provide information by collecting, analyzing and summarizing development and service issues

Accomplish engineering and organization mission by completing related results as needed

Support and develop software engineers by providing advice, coaching and educational opportunities

First and foremost, developing software our users need

Mentor junior and mid-level engineers

Collaborate with team to brainstorm and create new products

Grow engineering teams by interviewing, recruiting and hiring

Make informed decisions quickly and taking ownership of services and applications at scale

Work collaboratively with others to achieve goals

Be a persistent, creative problem ­solver

Remain cool and effective in a crisis

Stay on the leading edge of development practices

Passionate about great technologies, especially open source

Understand business needs and know how to create the tools to manage them

Job Description

• Site Inspection, planning & coordination
• Ensure works comply with regulations

Job Requirements

• Minimum Degree in Civil Engineering recognised by PEB, BCA or BOA
• With or without experience
• Salary commensurate with experience
• Part-Time or Full-Time
• To include expected salary
• Only those with qualifications recognised by BCA as RP need to apply

Come help develop the future of software used in industrial automation. We are seeking individual with a real passion for learning that are curious and often challenge the status quo. Attitude, aptitude and integrity are central to all successful applicants. Together, we work to build our primary product, PCO.

PLC programmers are responsible for programming assembly lines, robotic devices, or other manufacturing processes using programmable logic controllers (PLC). This role is ideal for a detail-oriented, logical thinker who enjoys working with different machines in combination with computers. PLC programmers work full time but experience a moderate amount of travel and activity in the workplace, such as supervising the installation of their programs and machinery.

The daily responsibility involvement includes of the following;

• Design and perform detailed designing for machine electrical control systems;
• Write Programmable Logic Control (PLC) program for automatic machine control & processes.
• Develop process specific application function librabries.
• PLC application programming and build new function library.
• Ability to utilize, debug, design and install engineering software.
• To collaborate and work together with Design Team (comprising of both mechanical & electrical membes) for the design concept arising from new project proposal and confirmed projects;
• Diploma or Degree in Electrical Engineering OR its equivalents;
• Good knowledge of PLC and circuit design;
• Demonsrated ability to visualize projects, develop and produce design from concept through completion.
• Sound knowledge of process instrumentation, PLC programs such as Delta, Mitsubishi, Matsushita, Omron PLC, Direct Logic, Siemens.
• RS422, RS485, Modbus TCP and other industrial interface protocol.
• Knowledgeable of VB, VC, C# will be considered as an added advantage;

Plus;

• Programming experiece in C++, Python, SQL or similar language.
• Industrial electrical panel design.
• HMI/SCADA programming (Allen-Bradley, Ignition or similar).

The Engineer is responsible for the engineering, maintenance and servicing of equipment and associated electrical and mechanical parts. He/She leads a team of Assistant Engineers and Technicians and general workers to ensure that maintenance works and services are carried out swiftly and in accordance with regulatory requirements to minimise disruptions to operations and ensure progression to meet project schedule.

The Engineer acts as a first point of contact for complex repairs and works closely with client and team to address and resolve technical and engineering issues. He/She develops maintenance and engineering regimes and ensures that they are implemented, and assesses risks and its impact on the organisation. The Engineer solves day-to-day issues and oversees the implementation of workflow improvements that may enhance clients' satisfaction, as well as optimise the use of the organisations resources.

The Engineer is a team player with strong leadership skills. He/She should be able to work under pressure, multi-task and work irregular hours, as well as be prepared to work at various heights.

~ Analyse risk management data.

~ Conduct audits on maintenance of equipment.

~ Develop, coordinate, or monitor all aspects of installation and commissioning.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage engineering resources.

~ Measure equipment efficiency to propose improvements.

~ Monitor maintenance and repair schedules to ensure compliance.

~ Oversees the deployment of staff to maintenance functions.

~ Prepares specifications and drawings installation.

~ Specify system components or direct modification of products.

~ Inspection on installation method

~ Effectiveness of the corrective action process and the improvement implementation

~ Documentation of the production inspection plan, process control plan, technical work instruction

~ Documentation of Corrective Action Request (‘CAR’), processing of returned material, maintenance of product quality tracking status

~ Plan and track receiving quality inspection results and records

~ Compile quality summary report

Additional Information:

• 5 day Mon to Fri (8.30am to 5.30pm)
• Basic + Allowance + AWS + VB and other benefits
• Working location in Jurong with 2-way company transport at Jurong East
• Chemical Manufacturing MNC

Responsibilities:

• Supervise production staff, ensure effective production schedules, and enforce compliance with company policies.
• Oversee consistent and efficient production to ensure timely delivery of quality products.
• Participate in troubleshooting and process improvement activities within the plant.
• Manage the daily operations and transitions of production and packaging technicians.
• Lead investigations into deviations and identify root causes.
• Maintain workflow by monitoring processing steps, setting variables, and observing control points and equipment.
• Actively participate in Quality Management Systems (QMS) including GMP, SOP creation, IPC analysis, and CAPA management.
• Facilitate the review of Manufacturing and Packaging Batch Records.
• Manage SAP functions related to batch closure, inventory, purchase requisitions, work orders, and other related tasks.
• Support process and cleaning validation operations to ensure compliant outcomes.
• Implement cost-saving measures and develop or update SOPs and work instructions.
• Coordinate equipment maintenance and repairs to ensure operational efficiency.

Requirements:

• Minimum Diploma or Degree in Engineering.
• 5 working years experience in a process plant with supervisory experience.
• Autonomous, team player, high organizational skills and analytical.
• Good communication skills.
• Proficient in MS Office.
• Singaporeans Only

Interested applicants, please submit your application now!

We regret that only shortlisted candidates will be notified.

EA License No.: 23C1461

EA Reg. No.: R24120207 (Soh Yan Cheng Andrew)

By submitting your personal information and/or resume, you are deemed to consent to CareerVisors Pte. Ltd. to collect, use and disclose your personal information and/or resume to prospective employers/companies for the purposes of employment.

Responsibiliites :

• Collaborate with the business development Team to develop and come up with detailed solar PV system designs that meet client requirements, local codes, and industry standards.
• Optimise system layout for maximum energy production and cost-effectiveness.
• Perform solar resource assessments to determine energy generation potential.
• Conduct shading analysis and assess site suitability for solar installations.
• Develop bill of materials (BOM) for projects.
• Use modelling software to predict system performance, energy output, and financial returns.
• Prepare and submit permit applications, ensuring compliance with local regulations and utility requirements.
• Coordinate with regulatory authorities to secure necessary approvals.
• Develop and implement quality control procedures for solar installations.
• Conduct inspections to ensure system integrity and safety standards.
• Provide technical guidance and support to installation teams during system setup.
• Troubleshoot and resolve technical issues as they arise.
• Create and maintain accurate and detailed project documentation, including schematics, drawings, and technical manuals.
• Monitor and ensure systems are operating optimally before handing over to clients.
• Promote and adhere to safety protocols and ensure that all installations meet safety requirements.
• Prepare weekly and monthly progress reports for every project to ensure that projects are within schedule.
• Provide technical support for sales, proposals, and during potential client meetings.
• Must be proficient in AutoCAD
• Solar experience is added advantage

Requirements :

• Diploma or Bachelor’s Degree in Engineering or relevant field
• Prefer two (2) years of relevant work experience
• Preferably with Energy Industry or Renewable Products background
• AutoCAD, PVSyst or Helioscope skills preferred
• Technical advisors, EPC contractors, BD related roles are welcome to apply

The Engineer is responsible for the engineering, maintenance and servicing of equipment and associated electrical and mechanical parts. He/She leads a team of Assistant Engineers and Technicians and general workers to ensure that maintenance works and services are carried out swiftly and in accordance with regulatory requirements to minimise disruptions to operations and ensure progression to meet project schedule.

The Engineer acts as a first point of contact for complex repairs and works closely with client and team to address and resolve technical and engineering issues. He/She develops maintenance and engineering regimes and ensures that they are implemented, and assesses risks and its impact on the organisation. The Engineer solves day-to-day issues and oversees the implementation of workflow improvements that may enhance clients' satisfaction, as well as optimise the use of the organisations resources.

The Engineer is a team player with strong leadership skills. He/She should be able to work under pressure, multi-task and work irregular hours, as well as be prepared to work at various heights.

~ Analyse risk management data.

~ Conduct audits on maintenance of equipment.

~ Develop, coordinate, or monitor all aspects of installation and commissioning.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage engineering resources.

~ Measure equipment efficiency to propose improvements.

~ Monitor maintenance and repair schedules to ensure compliance.

~ Oversees the deployment of staff to maintenance functions.

~ Prepares specifications and drawings installation.

~ Specify system components or direct modification of products.

~ Inspection on installation method

~ Effectiveness of the corrective action process and the improvement implementation

~ Documentation of the production inspection plan, process control plan, technical work instruction

~ Documentation of Corrective Action Request (‘CAR’), processing of returned material, maintenance of product quality tracking status

~ Plan and track receiving quality inspection results and records

~ Compile quality summary report

Work in construction sector

• Prepare shop-drawings and follow-up on subsequent comments.
• Attend project safety meeting and site co-ordination meeting.
• Arrangement of work with our site supervisors according to Builder's work program.
• Monitor materials purchase and delivery schedule.
• Implement variation work upon receiving new drawings and instructions
• Assist site staff in preparing as-built drawings, operation and maintenance manual.

Job Description:

• Support set up of machinery to ensure on-time for mass production.
• Responsible for leading machine conversions and cleaning equipment.
• Assist in immediate breakdown restoration of machine function to achieve production output.
• Perform troubleshooting and diagnostic-based troubleshooting guide.
• Conduct on-the-job training for new production operators and technicians
• Statistical process monitoring and control lead to productivity improvements.
• Support continuous improvement initiatives toward production efficiency and quality.
• Design and fabricate simple jigs/fixtures to improve production processes.
• Carry out periodical maintenance for process machinery on schedule.
• Review process issues, and internal corrective action requests, assist in a customer complaint investigation, and conduct failure analysis.
• Assist new production introduction trial run.
• Ensure customer orders are fulfilled on time in full.
• Perform reconciliation and maintain an accurate inventory of materials and finished goods.
• Consistently adhere to good housekeeping practices and safety regulations.
• Responsible for completing and countersigning GMP documentation for traceability and submitting it to Management at the end of each processed order.
• Ensure workplace safety.
• Workplace housekeeping and cleanliness.
• Any other duties and responsibilities as assigned by the management.

Job Requirements:

• Preferably at least a Diploma / Higher NITEC / NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering.
• Able to read basic engineering drawings.
• Fluent in both oral and written English.
• Knowledge of GMP will be an added advantage.
• Good communication and interpersonal skills.
• Able to support overtime and shift.
• Systematic and able to work under pressure.
• Able to work independently.

1. JOB DESCRIPTION

Job Title

Assistant Production Engineer

Job Description & Requirements

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Cconstruction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Our Client is a leader in the Manufacturing MNC. Due to their current expansion plan, they are looking for a Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibility:

• Responsible in production planning and control processes
• Handle manpower allocation/planning and participate in HR-related activities.
• Manage order processing and related documentation tasks.
• Work closely with Sales and Quality departments to resolve production issues.
• Track and monitor production schedules to meet delivery timelines.
• Prepare and submit detailed monthly production reports.
• Involve in process improvement initiatives.
• Any other ad-hoc duties as assigned.

Requirement:

• Minimum Diploma in Engineering related studies or equivalent
• Minimum 2 years relevant experience
• Proficient in Microsoft Office application

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Production Management Trainee (Manufacturer company)

5 work days, 8am-530pm, Sembawang, $2000-$2500

Responsibilities & Requirement:

• Handle day to day operation.
• Monitor attendance of the workers.
• To carry out inspections of the facilities to identify and resolve issues.
• Monitor equipment inventory and place orders when necessary.
• Ensure health and safety policies are observed.
• To attend ad-hoc assignment
• Quarterly Bonuses & other benefits
• Transport and uniform provided
• Singaporean only may applied

Interested applicants, please click apply button or email resume : [email protected]

We regret that only shortlisted candidates will be notified.

Strafford Consulting Pte Ltd

EA License No: 23C1919

By submitting your personal information and/or resume, you are deemed to consent to Strafford Consulting Pte. Ltd. to collect, use and disclose your personal information and/or resume to prospective employers/companies for the purposes of employment.

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Construction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

1. To coordinate with consultants / subcontractors on the shopdrawings / samples / method statements and keep all involved parties updated of the latest changes.
2. To attend to project / technical meeting and resolve site issues with owner / consultants in order for the site progress to proceed smoothly.
3. To verify the work done on site are in accordance to the approved drawings / specifications / authority’s requirement and also ensured that the subcontractor carry out rectification for non-compliance.
4. To resolve site issues with consultants / subcontractor / supplier ASAP in order to minimise delay to the construction progress.
5. To ensure that the related documentations are updated and ready for ISO audit.
6. To cooperate with the safety department and carry out the assigned duties within the safety framework.
7. Assist site management team in project Planning & coordination.
8. Plan and schedule work sequences for construction operation.
9. Arrange and prepare documents for authorities’ submission for Conquas, RI, TOP etc.
10. To study tender / construction drawings, specifications, and contracts to understand project requirements.
11. Understanding of critical project criteria related to schedule & productivity.
12. Must be a team player and ability to work in a cross-functional team environment.
13. Strong oral and written communication skills.
14. Able to work independently, proactive and self-motivated.
15. Able to provide guidance to new staff / junior staff.
16. Minimum of 5 years of relevant experience.

Our manufacturing company designs and manufactures metal precision components, molds, and precision-pressed materials.

Of course, people with Process experience are of the utmost importance but they have to be able to speak English and be able-bodied for the job posted.

Malaysian PRs welcome to apply.

Job Description & Requirements

1) Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.

2) Confer with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.

3) Responsible of setting the machine to meet the First Article base on the customer print, tolerance, and dimensions.

4) Responsible of assisting the Machine operator to meet their goals.

5) Responsible to edit program to suit different machines will be preferred

6) Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications.

7) Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.

8) Oversee installation, operation, maintenance, and repair to ensure that machines and equipment are installed and functioning according to specifications.

9) Conduct research that tests and analyzes the feasibility, design, operation and performance of equipment, components and systems.

10) Develop, coordinate, and monitor all aspects of production, including selection of manufacturing methods, fabrication, and operation of products.

Job Description

1. Oversee the works on equipment structures, installations, deployments, facilities, and equipment being deployed at sites.

2. Plan and work out the resource provision requirements, work, schedule, and Standard Operating Procedures (SOP) for works at sites.

3. Review planned work schedule and method statements prior to commencement of site work activities.

4. Ensure that works are carried out accordingly to design, meeting the safety, health, environmental and comfort requirement for stakeholders.

5. Identify defects and damages at the site infrastructures, including equipment and facilities, as well as theft, accidents, and incidents.

6. Carry out safety training to instil safety awareness. Ensure safety rules and regulations at sites are adhered to by all site personnel.

7. Be part of Safety Committee and ensure compliance to safety, health and environmental requirements including Authority Code of Practices (COP) and WSH, MOH & MOM Guidelines.

8. Resolve any unexpected problems or difficulties that may arise at sites.

10. Prepare regular reports to update site progress, resource utilisation, requirements, past and on-going activities, etc.

Requirements

1. Minimum bachelor’s degree with at least Six (6) years’ relevant field safety experience in supervision of installation and maintenance of roadside and Civil and structural coordination with government/utility agencies and other contractors.

2. Experience as a safety auditor/inspector in ensuring Environmental, Safety and Health practices are complied with.

3. Strong analytical and problem-solving skills, resourceful and meticulous.

4. Highly motivated and pro-active with the ability to work both independently as well as in a team.

5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint for Windows.

6. Good verbal communication and writing skills in English.

7. Be expected to travel regularly between office and sites.

8. Prepared to work on site and perform night work based on project needs.

Job Description

• Industry/ Organization Type: F&B Manufacturing
• Position Title: Production Operator / Food Operator (Central Kitchen)
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday 9 AM-6 PM)
• Salary Package: Basic Salary up to $3,000 + Performance Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Operate machinery and equipment involved in food production, including mixing, cooking, packaging, and labeling, as per company procedures and product specifications.
• Ensure that all products meet the company’s quality and safety standards.
• Conduct regular checks on products to ensure consistency in texture, flavor, and appearance.
• Perform regular machine checks and basic maintenance tasks such as cleaning, lubricating, and adjusting equipment to ensure smooth operation.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• At least 1 year of working experience in a related field
• Able to commit OT when required
• Physically fit – able to carry up to 25KG

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69984 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus