Job Description:

• Drives systems development from concept to production.
• Translate the product requirements into a functional system with a detailed technical design plan.
• Create and maintain all the relevant Hardware design document, schematic design drawings, layout diagrams, Gerber, verification documents and reports.
• Proactively assess the technical risks and resolve the design issues by providing reliable solutions.
• Ensure Electrical regulatory compliance and thermal dissipation requirements are fully met with proven design solutions and design practices.
• Lead and manage the product electronics design with in-house design team, ODM and OEM suppliers.
• Maintain effective communication with internal stakeholders as well as internal functional groups (local and overseas) in order to track and report the project status.
• Manage all development projects in accordance with Brady development processes and tools.
• Ability to apply advanced electronics engineering principles and theories to complex issues. Demonstrates broad knowledge in the field.
• Interfaces effectively with other departments in the solution of problems or issues.

Requirments

• Bachelor degree in Electrical Engineering background.
• Minimum of 5 years’ experience as Senior Electrical Engineer.
• Ability to support firmware engineers on Boot loader/ BSP (Board support Package) development and debugging.
• Experience in Altium Designer is an advantage.
• Experience in Digital design, I/O Interface, Timing, Power, Thermal and cost analysis.
• Involvement in product design development and production transfer.
• Experience in Embedded mixed signal hardware design, especially in multi-layer PCB's using Microprocessors, DDR2/DDR3 Memories, SLC NAND, Stepper and DC Motor Drivers, USB Hub controllers, Ethernet transceivers, DACs, ADCs, LVDS Controllers and FPGA/CPLDs.

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

DevOps Engineer

Smart IMS is a leading provider of information technology solutions, offering a wide range of services to businesses worldwide. With a strong focus on innovation and customer satisfaction, we help organizations streamline operations, improve efficiency, and achieve their strategic goals.

We are currently looking for a DevOps Engineer to set up of CI/CD pipelines, application installation, triage activities and release support.

Responsibilities:

- Implement critical functions as a part of the DevOps team

- Collaborate with different teams to understand requirements for environment build.

- Troubleshoot and debug environment related issues.

- Document scripts and automation processes for future reference and maintenance.

Requirements:

- Exposure on CI/CD pipeline setup

- Familiar with Linux.

- Knowledge in cloud platforms and one or more scripting languages

Additional Information:

- Location: HarbourFront

- Working hours: Monday to Friday, 9 am to 6 pm.

- Competitive salary commensurate with experience, with 14 days of Annual Leave and above market medical coverage / insurance.

- 12-month renewable contract with 2 months' notice period.

Key Responsibilities:

• Conduct comprehensive site surveys to evaluate potential solar installation sites, ensuring compliance with all relevant SCDF (Singapore Civil Defence Force) regulations.
• Prepare and generate technical drawings based on project requirements, ensuring all designs comply with relevant building codes and regulations.
• Perform technical assessments such as shading analysis, PVSyst simulations, consumption analysis, and other energy efficiency evaluations.
• Prepare economic analysis, proposals, and tender documents for submission, ensuring accuracy and competitiveness.
• Work closely with the procurement team to liaise with vendors and suppliers for up-to-date price lists, product details, and service information.
• Ensure that technical and design specifications are met through careful interpretation and application of engineering drawings.
• Collaborate with project managers, engineers, and other stakeholders to ensure project success from design to implementation.

Key Requirements:

• Strong proficiency in AutoCAD (a must) for creating detailed and precise drawings.
• Familiarity with PVSyst and Sketchup software is highly preferred.
• In-depth knowledge and experience in interpreting engineering drawings and translating them into practical design requirements.
• Strong technical skills in performing shading analysis, energy consumption analysis, and conducting various technical simulations.
• Excellent understanding of solar power systems and related technical documentation.
• Ability to prepare economic analysis, proposals, and tender submissions.
• Strong communication and interpersonal skills to liaise effectively with vendors, suppliers, and internal teams.
• Detail-oriented with a focus on quality, compliance, and efficiency.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

The role is primarily to support the Binnies Singapore office to secure and deliver the Coastal and Flood Risk projects in Singapore. In addition, the successful individual will require to provide support to UK offices to deliver their Flood, Coastal, and Maritime projects.

It is primarily a technical role involving participation in maritime and coastal related civil engineering projects and studies. The individual will require performing design tasks, various studies, engineering management, client liaising, and communicating with other teams and offices.

The individual may need to work as a coastal specialist working closely with the same discipline and other multidisciplinary teams. This is a great opportunity for the successful candidate to develop his/her technical and engineering management skills, particularly in various types of flood, maritime and coastal projects, and obtain international experience.

The key duties and responsibilities include but are not limited to:

• Design of coastal and coastal related structures
• Undertake various coastal studies
• Perform the projects/tasks within the agreed budget and programme
• Client liaising
• Attending meetings both internal external
• Progress monitoring & reporting
• Proposal preparation

Required Competencies

• CPD in the relevant specialist skill area
• BSc or MEng (Hons) Coastal Engineering
• Specialist knowledge of areas such as metocean studies, feasibility studies, Beach and shore management plan preparation, and detailed design
• Coastal engineering knowledge (tide, current, waves, wave overtopping, rubble mound structures, tidal and storm surge barriers, coast protection works)
• Sound knowledge of BS Maritime & Eurocode codes and industry-standard guidelines such as CIRIA and other relevant international standards and guidelines
• Performing calculations and desktop studies with limited guidance
• Project report writing
• Proposal writing
• Understands support needed by junior staff
• Team player
• Adaptable
• Experience work in multidisciplinary coastal projects
• At least 10 years of experience in planning, design and/or implementation of coastal, marine, reclamatin infrastructure projects
• Experience in project management in the planning, design and/or implementation of coastal, marine, reclamation infrastructure projects is a plus point
• Experience in client liaising and leading technical meetings

Education & training:

• BSc or MEng in Civil and Coastal Engineering
• A registered Professional / Chartered Engineer under the Civil / Coastal Engineering Discipline is a plus point

Background & experience:

• Post-graduation consultancy office experience

Knowledge base:

• Coastal engineering design & studies
• Knowledge of Eurocodes/BS 6349/CIRIA Guidelines

Skills:

• Site assessments
• Design of coastal structures
• Metocean studies and surveys
• Feasibility studies
• Good experience in using design software
• Excellent written and oral communication skills
• Client liaising
• Excellent interpersonal skills

Personal attributes:

• Proven ability to carry out design and other tasks reliably
• Always seeking improvement in design and delivery performance
• Recognises client needs and delivers solutions
• Self-motivated
• Willing to make international travel for both short and long terms assignments with a short notice.

When you’re part of Thermo Fisher Scientific, you’ll do daring work, and join a team that values performance, quality and innovation. As part of a successful, growing global organization you will be encouraged to perform at your best. With revenues of more than $40 billion and the largest investment in R&D in the industry, we give our people the resources and chances to create significant contributions to the world.

Location/Division Specific Information

The Materials and Structural Analysis (MSD) Electron Microscopy (EM) business enables customers to find meaningful answers to questions that accelerate breakthrough discoveries, and ultimately change the world. The MSD EM business designs, manufactures, and supports the broadest range of high-performance microscopy and OFI systems workflows that provide images and answers in the micro-, nano-scales and OFI workflows.

Combining hardware and software expertise in electron, ion, and light microscopy with deep application knowledge in the materials science, life sciences, electronics, and natural resources markets, the worldwide Electron Microscopy employees are dedicated to customers' pursuit of discovery and resolution to global challenges.

Here are some of the products you might support our customers with:

• Corporate organization
• Overview of our instruments
• How to make a microscope

Day in the life of a Field Service Engineer: https://www.linkedin.com/mycompany/thermo-fisher-scientific/recommendations/urn:li:activity:6911716842898083842

How you will make an impact:

The Field Service Engineer II for the Materials and Structural Analysis Division (MSD) of Thermo Fisher Scientific is responsible for performing the on-site installation, servicing and repair of complex equipment and systems. Engineers investigate and improve operational quality of system equipment; Scanning Electron Microscopy (SEM), OFI Systems; instruct customers in the operation and maintenance of the system; serve as company liaison with customer on administrative and technical matters for assigned projects; and conduct on-site installations of the full range of Thermo Fisher Scientific electron microscopy systems and their associated options.

This role provides the opportunity to grow within Field Services and across the Thermo Fisher organization. You will be eligible for transportation support, company phone, company laptop as well as other company benefits that include bonus, employee assistance program and more!

What you will do:

• Conduct on-site installation of complex equipment and follow testing procedures to ensure proper working order
• Conduct on-site scheduled planned maintenance visits
• Provide solving and repair support for customers and other field service personnel
• Cultivate and develop positive working relationships with customers, system users and company personnel
• Successfully complete technical training, as required
• Complete and submit field service reports on assigned tools
• Perform Preventive Maintenance tasks
• Partner with colleagues to acquire technical guidance needed to problem-solve systems solutions
• Provide training for customers and users on system maintenance
• Provide feedback to product quality teams
• Provide appropriate input in writing updating and correcting various Thermo Fisher system documentation
• Provide guidance for various reports including identifying and isolating unique problems with system
• Act as a subject expert and resource for training
• Align with application scientists to collaborate on outstanding solutions to meet our users challenges
• Must maintain Thermo Fisher Scientifics’ Four-I Values.

How you will get here:

Education

University degree/Bachelor degree in electronics, physics, engineering, computer science or similar field preferred; or 2-5 years of equivalent combination of education, skills and experience

Experience

4-5 years’ Experience:

• Operating, solving, repairing and calibrating complex analysis tools such as SEM, Prober, OFI or similar systems is a plus but not required.
• Experience with Ultra High Vacuum (UHV), OFI systems a plus but not required.
• Experience operating O-scopes, digital voltmeter and logical problem solving.

Competencies

• Demonstrate Product Knowledge: Describe products and product lines, their positioning in the marketplace, and the needs they meet
• Describes product portfolio characteristics
• Identifies and describes competitors at a high level
• Scale the Technology: Gain proficiency in installing, servicing and maintaining increasingly complex scientific instruments
• Performs routine maintenance and basic repairs on a small number of noncomplex instruments
• Resolves majority of calls on first visit, applying appropriate resources
• Solve Tough Problems- solve problems precisely, timely and efficiently
• Fix with Precision: Follow safe, methodical processes to isolate and resolve problems
• Follows SOPs and standard processes to solve problems
• Identifies problems too complex to solve independently and seeks help
• Solve Problems Remotely: Remotely gather information and take action to resolve issues
• Uses standard tools to remotely gather information on instrument status
• Effectively gathers and documents key information about the problem from customer
• Impress the customer- Provide the highest level of proactive service to every customer, regardless of the circumstance
• Communicate Effectively: Foster clear, fact-based conversations with customers
• Proactively seeks to communicate with customers when onsite
• Actively and attentively listens to customers
• Takes ownership for relationship with customer and internal partners
• Manage Difficult Situations: Demonstrate empathy and professionalism while resolving customer issues
• Maintains a positive attitude in the face of challenges in interactions with customers
• Asks for assistance from supervisor or peers when unsure with how to handle a difficult customer situation
• Drive for Results- Take the initiative to follow processes and to focus on results, without waiting to be asked
• Respect for Process: Follow standard processes and implement processes where none exist
• Understands and follows key processes relevant to role
• Aware of SOPs and asks questions as appropriate
• Drive to Solutions: Demonstrate resilience and focus in resolving issues and meeting goals
• Provides a first timefix when possible, applying appropriate resources
• Involves others quickly when needed to solve a problem
• Demonstrate Initiative: Identify what needs to be done and do it without waiting to be asked
• Takes ownership of important issues within job scope without being asked
• Asks questions to find opportunities that need to be addressed

Knowledge, Skills, Abilities

• Required to read, write, and speak English fluently.
• Demonstrated ability to work under pressure, with a consistent record to make decisions with minimal direct supervision.
• Demonstrated ability to be detail oriented, problem solver, promote team environment.
• Demonstrated ability to display a high level of confidentiality for both customer and Thermo Fisher Scientific.
• Literate in Windows software environments
• Must have a thorough understanding and extensive experience solving and repairing ultra-high vacuum and high voltage systems.
• Ability to read and interpret schematics
• Ability to partner effectively with customers
• Strong Interpersonal communication, teamwork/building, time management, organizational, problem solving and customer service skills
• Proven ability to solving complex systems and subsystems down to component level
• Familiar with UHV phenomenon and technology
• Must be willing to travel 25-50% of the time. Often on short notice, to customer sites to resolve problems or support other field service personnel
• Must possess a valid driver’s license and passport and travel regionally and internationally as the need arises.
• Requires proof of Covid-19 vaccination.
• Extensive walking may be required.
• May work at customer locations, in office environment to include cubicles and/or in laboratory environments.
• Depending on area of building, personal protective equipment may be worn to include lab coats, coveralls, hood, facemask, hairnets, safety gloves, safety glasses, steel toe shoes, and/or bump hats.
• Physical requirements include the ability to lift up to 50 lbs.

Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.

Apply today! http://jobs.thermofisher.com

Job Info:

• Monday to Saturday 7 - 7
• Location: Bukit Batok

Responsibilities:

• Pre-plan and prepare construction schedule, and coordinate activities.
• Follow up and report On-site and Off-site project management and progress.
• To prepare and submit progress reports as required by consultants and clients.
• Analyse project specifications, including civil/structural, architectural, and M&E drawings.
• Conduct thorough monitoring of construction work activities and prepare daily, weekly, and monthly site reports.
• Maintain a safe and clean working environment, ensuring adherence to standard rules and regulations.
• Perform other project related administrative duties assigned.
• Coordinate, prepare and arrange site inspection with RE & RTO.
• Arrange daily Toolbox Meeting with Site Supervisor and WSHC and briefing on site activities and daily task. Arrange Site daily activities with Site Supervisor.
• Attend monthly, weekly safety meeting and site works with Client.
• Prepare necessary submission for project. Example, RFI, MS, RA, SWP, shop drawings and supporting documents preparation.
• To prepare and keep records, summary related to project. Maintain Project documents control for ISO purpose.
• Organise the team to attend to emergency defects on Sundays and Public Holidays, and update the status of resolution in the client’s WhatsApp chat group. (Emergency Recovery Work)

Requirements:

• Minimum 2 to 4 years of work experience in infrastructural or marine construction industry. However open to fresh graduate to apply.
• Relevant project experiences in dredging, reclamation or near shore construction will be preferred.
• Knowledge of construction methods, materials, and BCA regulations.
• Daily sea travel to island work site is mandatory.
• May require to assist in variable projects.
• Own travel vehicle will be advantageous.
• Strong organizational and communication skills.
• Ability to work well under pressure and in a fast-paced environment.

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

EA License No: 24C2352

EA Personnel No: R24123724

EA Personnel Name: Tiffany Ng Xin Yi

Key Responsibilities:

• Responsible for generating scripts and templates required for the automatic provisioning of resources
• Discover standard cloud services offerings, install, and execute processes and standards for optimal use of cloud service provider offerings.
• Build scripts to integrate with the organization’s systems as a service offering.
• Stay well-informed of failures and complications related to a cloud offering.
• Responsible for debugging technical issues inside a complex stack involving virtualization, containers, microservices, etc.
• Manage a complex cloud environment in accordance with company security guidelines

Requirements:

• Mandatory - having expertise in deploying and managing IaaS & PaaS Infrastructure services on AWS, GCP & VMWare environments using Terraform, Cloud Formation, CDK (Cloud Development Kit) & Ansible
• Hands on experience in Ansible tower as well as writing and deploying Ansible Playbooks
• Relevant cloud certifications such as AWS Cloud Practitioner or Sys Ops .
• MUST have experience on Singapore Government Cloud
• Familiarity with containerization technologies such as Docker , Kubernetes Docker and EKS. And
• Public cloud delivery know-how with AWS and/or Azure
• Hands-on AWS experience with at least 2 implementation (preferred in an Enterprise scale environment)
• Experience with core AWS platform architecture, including areas such as: Organizations, Account Design, VPC, Subnet, segmentation strategies.
• Experience with Cloud native Backup and Disaster Recovery approach and design
• Knowledge of DevOps and CI/CD pipeline (GitHub, Jenkins, Artifactory)
• Familiar with Encryption, Logging, and Privacy/Security Protocols (e.g. TLS 1.2, ELK stack)
• Familiar with one of the enterprise operating systems (Microsoft Windows Server (20012 & up) and/or RHEL 7, 8)

People Profilers Pte Ltd

DID: 6950 9738

http://www.peopleprofilers.com

Lim Yi Tian, Candy

EA License No. 02C4944
Registration No. R1109829

Job Overview

As an Indoor Sales Engineer, you will play a crucial role in supporting our sales team and enhancing our customer engagement strategies. Your focus will be on delivering exceptional customer service, collaborating closely with sales teams, and contributing to our marketing efforts.

Key Responsibilities:

Customer Service:

- Deliver exceptional customer service through proactive pre-sales support.

- Achieve customer satisfaction and loyalty by utilizing effective communication and resolving issues efficiently.

Sales Support:

- Generate sales quotations and reports to facilitate and enhance the sales team’s efforts.

- Close collaboration with sales and application teams to comprehend customer requirements and deliver customized solutions.

- Maintaining up-to-date CRM records, tracking customer interactions, order history, and anticipated demands.

- Evaluate CRM data to identify trends, opportunities, and areas for enhancement.

Marketing:

- To support corporate global marketing on local multi-channel marketing campaigns (digital, social media, email, print).

- Ability to create content to drive brand awareness, lead generation, and customer engagement will be an advantage.

- Monitor campaign performance and to optimize results.

Remuneration:

- Competitive salary and benefits package for suitable candidate

- Opportunity for professional training, growth and development.

- A collaborative and dynamic work environment.

Qualifications:

- Candidate must possess at least a Diploma in electronic engineering/business.

- Familiarity with CRM systems, MS Office, SAP B1 and marketing tools is a plus.

- Proactive and results-oriented, with great aptitude for seeing possibilities and addressing problems.

About VIAVI Solutions

VIAVI (NASDAQ: VIAV) is a global provider of network test, monitoring and assurance solutions for telecommunications, cloud, enterprises, first responders, military, aerospace, and railway. VIAVI is also a leader in light management technologies for 3D sensing, anti-counterfeiting, consumer electronics, industrial, automotive, government and aerospace applications.

We are the people behind the products that help keep the world connected at home, school, work, at play, and everywhere in between. VIAVI employees are passionate about supporting customer success and we welcome people who bring their best every day to the company - to question, to collaborate and to push for solutions that will delight our customers.

Role: PQC Research Engineer

Location: Singapore

Summary

We are looking for a highly skilled and motivated Research Engineer specializing in Post-Quantum Cryptography and AI technologies to join our advanced research team. The ideal candidate will have a strong foundation in mathematics, software development, and communication systems. The candidate will focus on designing, analyzing, and validating cryptographic solutions that remain secure against quantum computing threats, contributing to the future of secure digital communication.

Major Responsibilities

· Research and Development:

-Conduct cutting-edge research on post-quantum cryptographic algorithms.

-Investigate potential weaknesses in current cryptographic standards and help develop quantum-resistant algorithms.

-Design cryptographic protocols that ensure security and efficiency in a post-quantum world.

-Investigate and design adoption of AI technology.

· Mathematical Modeling:

- Develop mathematical models and theoretical frameworks for post-quantum cryptosystems.

-Conduct performance analysis and benchmark new cryptographic algorithms for robustness and scalability.

· Software Development:

-Implement and optimize post-quantum cryptographic algorithms in software, using programming languages such as Python, C, C++, or Rust.

-Work with existing cryptographic libraries and frameworks (e.g., OpenSSL, Liboqs) to integrate quantum-safe algorithms.

-Collaborate with software development teams to ensure secure integration of quantum- resistant cryptosystems into applications.

· Security Protocols & Systems:

-Design and test quantum-resistant security protocols for networks, cloud services, and distributed systems.

-Develop key exchange and digital signature algorithms that are secure in the quantum era.

-Explore hybrid cryptography solutions that combine classical and post-quantum techniques for immediate use.

· Collaboration andPublication:

-Work closely with interdisciplinary teams of researchers, cryptographers, and engineers to tackle the challenges of post-quantum cryptography.

-Publish research results in top-tier journals and conferences, and present findings to both technical and non-technical audiences.

· Prototyping andTesting:

-Design and implement proof-of-concept cryptographic systems for practical applications.

-Perform experimental testing to evaluate the performance, security, and efficiency of post- quantum cryptographic methods.

· Stay Updated:

-Keep abreast of the latest developments in quantum computing, cryptography, and related fields.

-Contribute to the company's post-quantum cryptography roadmap and long-term strategy.

Required Qualifications:

· Master’s Degree or above in Computer Science, Mathematics, Electrical Engineering, Information Security, or a related field.

· Proficiency in mathematics, particularly in number theory, algebra, and complexity theory.

· Hands-on experience in software development using languages such as Python, C/C++, Rust, or Go.

· Familiarity with communication protocols and security architectures.

Preferred Qualifications:

· Good understanding of cryptography, including symmetric and asymmetric encryption techniques.

· Good understanding of AI technology

· Experience with post-quantum cryptographic frameworks and algorithms (e.g., NIST PQC candidates).

Skills and Competencies:

· Strong analytical and problem-solving skills.

· Ability to collaborate in a multidisciplinary research environment.

· Excellent communication skills, both written and verbal, to effectively share research insights.

· High level of attention to detail and a proactive approach to emerging security threats.

If you have what it takes to push boundaries and seize opportunities, apply to join our team today.

VIAVI Solutions is an equal opportunity and affirmative action employer - minorities / females / veterans / persons with disabilities.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Print Art Director
Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Outram Park / Harbourfront

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Job Description:

• Demonstrate with minimal direction the attributes of good planning, driving for results, customer focus (both internal and external), good creativity, and problem solving abilities, in addition to good written and oral communication skills.
• Develop modular approach to hardware design and architecture.
• Generate concepts and develop detailed designs for the mechanical systems.
• Conduct detailed engineering analyses on components and sub-assemblies.
• Proactively assess the technical risks and resolve the design issues by providing reliable solutions.
• Ensure quality is built into designs and driven through product development.
• Develop a mechanical timeline for their own developments and is accountable for it.
• Support project planning and execute design implementation.
• Deliver module designs based on planned cost, schedule and quality.
• Develop test methodology, experimentation, prototype to verify design.
• Work in close support of the marketing department in the analysis of customer need (VOC) and in the development of product specifications.
• Translate product requirements into a functional system.
• Work with manufacturing team to support injection molding, gear design, machining, sheet metal and assembly.
• Participate in other aspects of the product development such as : solving manufacturing issues, product performance, repair issues, product improvements, and value engineering.
• Work cross-functionally with internal team and other core disciplines (EE, Firmware, Software, Marketing).
• Ability to apply advanced mechanical engineering principles and theories to complex issues.
• Mentor and coach junior engineers on project basis.

Requirements:

• A Bachelor in Mechanical Engineering with minimum 8 years of relevant professional experience in mechanical design.
• Candidate must have full experience in product development from conceptualization to mass production.
• Knowledge of mechanical engineering design principles and practice.
• Experience designing complex mechanisms, such as clutches, gear trains, cams, and linkages.
• Knowledge of electro-mechanical components such as motors, power transmission and sensors.
• Expertise in the design of plastic, sheet metal, gear design, die-cast parts, rubber, electro-mechanical & mechanism parts/assemblies.
• Fluent in SolidWorks CAD software or/and FEA.
• Sound knowledge of Geometric Dimensioning & Tolerancing.
• Knowledge of Design of Experiments and Six Sigma is preferred.
• Competence with analytical techniques such as Design for Failure Modes and Effects Analysis, Design for Assembly, Design for Manufacturing, and Pugh Matrix is preferred.

The QA/QC Engineer is responsible for implementing site quality assurance and quality control system, in compliance with the quality standards at site.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Engage the project team to deliver high quality works;
• Lead the QA/QC team and train the site team on Structural and Architectural trades;
• Assess site operations and procedures daily and recommend improvement actions;
• Provide insights for defects and recommend preventive measures;
• Prepare monthly reports for Management;
• Conduct Internal Quality Audits;
• Compile trade information, test reports, and formalize documentation;
• Liaise with authorities (i.e. BCA on assessment to achieve target score, LTA on inspections and compliances)
• Adhere to safety practices in the workplace.

Value Add of Position

• Obtain buy-in from project team towards quality assurance and quality control initiatives.
• Translate deep understanding of quality standards and requirements into site works.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering or construction related field
• Experience: At least 3 years of building and/or civil engineering experience.
• Experience in QA/QC and certified auditors would have an added advantage.
• Completed at least 1 building project

Technical Competencies

• Knowledge of quality requirement of BCA, industry norms and contract specifications
• Quality Management Systems certification – ISO 9000
• Knowledge in Structural and Architectural works

Job Description:

• Collaborate with other developers and engineers to design, build, and maintain applications.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Troubleshoot software issues and participate in impact analysis of encountered issues.
• Generate relevant documentations, reports etc.
• Contribute to continuous improvement of software development best practices.
• Keeping up-to-date with industry trends and technology developments.

Requirements:

• Degree in Computing/ Computer Science/ Computer Engineering/ Info Systems / EEE or equivalent
• Entry level candidates with good learning attitude and relevant experience can be considered.
• Familiar to full-stack development and understand concepts of software engineering.
• Knowledge of Agile Development methodology.
• Knowledge of basic coding languages such as C++, Javascript, HTML5 and Java
• Basic programming experience.
• Knowledge of databases (SQL / NoSQL).
• Comfortable using AngularJS, NodeJS, ReactJS and other common frameworks to develop software for various platform.
• Ability to learn new software and technologies quickly.
• Ability to follow instructions and work in a team environment.
• Good team player with critical thinking, analytical and creative problem-solving skills.
• Detail-oriented.
• Candidates with more professional/complexity of experience can be considered for the senior role

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Ackcio Pte Ltd builds reliable wireless monitoring solutions for industrial applications. Our Ackcio Beam suite of products runs off our core technology, a long-range, low-power radio wireless mesh communication to reliably transmit industrial sensor data in real-time both underground and above ground. Currently our technology is widely used in construction, mining, infrastructure, and rail industries to automate the monitoring process, improve productivity, and make the activity safe. We now help major clients in over 40 countries across 6 continents monitor their projects with our technology.

Ackcio was incorporated in Singapore in 2016, and has drawn investments from prominent investors including Atlas Ventures, Wavemaker Partners, Enterprise Singapore, Accelerasia, Aletra Capital Partners, Foundamental, and EF.

Job Description

Our business is growing rapidly, and we are looking for a self-motivated Senior Electronics Engineer to drive our electronics R&D efforts, design new products, and bring them to market that would be deployed across the globe in the harshest imaginable environments like hot gold mines in Australia to freezing temperatures of Scandinavia.

You would be responsible for timely execution of features and releases. We expect you to be engineering innovative capabilities to our product and ensure integration of our system with external partners from ideation to execution.

Core Responsibilities

Product Architecting

• Understand the product requirement in detail and capture all functionality requirements.
• Work with the relevant stakeholders and team members in obtaining a deep understanding of the products that are to be built.
• Architect the products’ electronics design while incorporating all functionality requirements.

Design and Implementation

• Along with the other Engineers, design the products’ electronics circuits.
• Ensure that the product design complies with requirements such as EMC emissions, power constraints, industrial usage, etc.
• Work through the product development cycle all the way from schematic design to prototype to production.
• Verify the designs through simulations and tests to ensure that all functional and non-functional requirements are captured correctly.
• Optimize the product design to reduce the cost of manufacturing and ensure that it is designed for manufacturing.
• Compile the PCB layout diagrams and other associated documents with our contract manufacturer.

Product Validation, Testing and mass production

• Work with our contract manufacturer to bring the product to life.
• Build prototypes and conduct full functionality tests.
• Oversee the production process of the products with our contract manufacturer to ensure we can manufacture the products at scale.
• Design automated test procedures and documentation for remote troubleshooting.
• Component sourcing and evaluation for alternate sourcing and cost reduction.

Qualification Required

• Master’s/Bachelor’s Degree in Electrical/Electronic Engineering
• At least 5 or more years in designing and productization of electronic products.
• Proven track record in designing analog and digital circuits for industrial electronic products.
• Experience with PCB design software such as Altium.
• Good problem-solving skills.
• Excellent analytical skills with a proven ability to think innovatively and resourcefully.
• Team player with a no ego and collaborative attitude.
• Self-motivated and driven to excel and deliver, able to handle stress with a positive attitude.
• Proven track record in leadership and project management.
• Strong communication and presentation skills especially in technical topics.
• Flexible, no 9 to 5 mentality.
• Experience with Mechanical design software such as SolidWorks will be a plus.

Perks

• Work with a talented team of a fast-growing, deep-tech startup.
• Cool working space with lots of friendly people.
• Be part of a deep-tech startup that is disrupting the market
• Open and supportive leadership team
• Flexible work arrangements

Our Awards

2021

• Great Place To Work certified
• Techblazer Bronze Award - Singapore highest accolade for tech innovation
• Forbes Asia 100 To Watch
• Top Singapore Wireless Companies and Startups
• Top Singapore Construction Companies and Startups
• Finalist - Ground Engineering Awards
  -Award for Equipment Innovation
  -Specialist Geotechnical Supplier of the Year
• Finalist - New Civil Engineer Tunneling Festival
  -Innovation in Instrumentation & Monitoring

2020

• Top 50 Contech Startups
  - Productivity Category

Find us at https://www.ackcio.com/

Secretlab is endeavoring uncharted waters by exploring exciting new product categories. Our commitment to innovation and excellence has positioned us as a leader in our industry. As we continue to expand our product portfolio, we are seeking a talented and passionate project lead to join our dynamic team.

Position Overview:

The PCB Designer will spearhead the design and development of PCB’s. This pivotal role entails team leadership, ensuring projects align with quality benchmarks and deadlines.

Experience:

• 3+ years of experience in PCB design, with a proven track record of successfully designing and manufacturing complex PCBs.
• Experience with high-speed digital circuits, analog circuits, RF circuits, or power electronics is a plus.
• Strong experience with industry-standard PCB design tools (e.g., Altium Designer, Cadence, Eagle, or similar).
• Familiarity with design for manufacturability (DFM) and assembly (DFA) guidelines.

Skills:

• Proficiency in schematic capture, PCB layout, and routing techniques.
• Understanding of signal integrity, high-speed circuit design, and electromagnetic interference (EMI) mitigation.
• Experience with power distribution design, thermal management, and grounding techniques.
• Knowledge of PCB fabrication and assembly processes, including surface-mount technology (SMT) and through-hole components.
• Familiarity with component libraries, part creation, and footprint design.

Qualifications:

• Bachelors degree in electrical engineering, computer engineering or related field.
• 8+ years of progressive leadership experience in engineering teams with expertise in audio DSP engineering.

Company Overview:

Secretlab is endeavoring uncharted waters by exploring exciting new product categories. Our commitment to innovation and excellence has positioned us as a leader in our industry. As we continue to expand our product portfolio, we are seeking a talented and passionate project lead to join our dynamic team.

Position Overview:

The hardware lead will spearhead the development and deployment hardware solutions. This pivotal role entails team leadership, ensuring projects align with quality benchmarks and deadlines.

Responsibilities:

Hardware Design and Development:

• Lead the design, prototyping, and testing of hardware systems, ensuring they meet functional and performance requirements.
• Architect hardware solutions, including schematic design, PCB layout, and component selection, ensuring the design is manufacturable and cost-effective.
• Ensure that designs are scalable and maintainable while meeting product performance, cost, and timeline goals.

Testing and Validation:

• Oversee the development of test plans and validation processes to ensure that hardware products meet specifications and regulatory requirements.
• Perform hands-on testing, troubleshooting, and debugging of hardware prototypes and production units.
• Develop and track test reports, failure analysis, and corrective actions.

Qualifications:

• Bachelors degree in electrical engineering, computer engineering or related field.
• 8+ years of progressive leadership experience in engineering teams with expertise in audio DSP engineering.

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Project Coordinator/ Project Engineer
• Working Location: Tuas
• Working Hours: Mon – Fri, 8.30 AM – 5.30 PM
• Salary Package: Up to $4,100 + AWS + Bonus (Up to 4 months)
• Duration: Permanent

Key Responsibilities

• Monitor project activities.
• Report to the Section Manager/ Department Manager.
• Maintain and control project site and safety.
• Verify project deliverables with site documents.
• Report site/ safety deviations or issues on projects to the Section Manager.
• Attend/ Conduct toolbox meetings.
• Report and assist the Section Manager/ Engineer in project deliverables.
• Participate in department EHS activities.
• Assist with maintenance activities.
• Prepare Purchase Requisition and update cost summaries as required.
• Maintain project document filing and organize documents.

APPLY NOW!!!

• At least a Diploma and above.
• Minimum 1 year of related working experience or knowledge in the Project Site of the chemical industry.
• Proficient with Microsoft Office.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67897 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/Organization Type: Marine Maintenance/Services
• Position Title: Service Engineer
• Working Location: Islandwide
• Working Hours: Flexible – must be on standby 24/7 to respond to client calls
• Salary Package: Up to $4,500 +OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform diagnostics, maintenance, and repair work on DF engines and other marine propulsion systems.
• Conduct routine inspections and troubleshoot engine issues to minimize downtime.
• Provide technical support and expertise to clients, ensuring optimal engine performance.
• Collaborate with the engineering team to develop and implement maintenance strategies.
• Prepare detailed service reports and documentation for all completed work.
• Ensure compliance with safety regulations and industry standards during all service activities.
• Travel to client sites as required to perform on-site maintenance and repairs.

APPLY NOW!!!

• At least a Diploma in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.
• Minimum of 2 years of experience in engine repairs and maintenance, preferably within the marine industry.
• Experience with DF engines is highly preferred.
• Able to travel to client sites as needed, sometimes on short notice.
• The position requires flexibility in working hours, as the engineer must be on standby 24/7 to respond to client calls.
• Ability to work in varying environments and under pressure to resolve issues promptly.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68647 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Institute of Operations Research and Analytics (IORA) is seeking a dedicated and skilled Research Engineer to support our research projects focused on the implementation and analysis of machine learning (ML) algorithms. The successful candidate will be instrumental in providing coding expertise, data management, and analytical support to a range of projects in operations research and analytics.

This is an excellent opportunity for recent graduates passionate about applying their technical skills to real-world problems, particularly in the field of machine learning and data analytics.

Key Responsibilities

• Coding and Implementation: Develop and implement machine learning algorithms and models to support IORA’s ongoing and new research projects.
• Data Analysis: Conduct data processing, exploration, and visualization, delivering insights that guide research conclusions.
• Model Evaluation: Collaborate with researchers to evaluate model performance, optimizing algorithms for robustness and efficiency.
• Documentation: Ensure thorough documentation of code, data pipelines, and research findings to facilitate reproducibility and project continuity.
• Collaboration: Work closely with research teams to understand project objectives, gather requirements, and provide technical support in the form of coding and data analysis.
• Maintenance and Troubleshooting: Manage and troubleshoot issues in codebases and data pipelines as they arise, ensuring smooth and efficient project progress.

Requirements

• Education: Bachelor’s degree in Computer Science, Data Science, Engineering, Statistics, or related field.
• Programming Skills: Proficiency in Python (preferred) or R, with experience in relevant libraries for ML and data processing (e.g., Scikit-Learn, Pandas, TensorFlow, PyTorch).
• Data Management: Familiarity with data extraction, cleaning, and preprocessing methods; experience with SQL or other database management tools is a plus.
• Machine Learning Knowledge: Understanding of machine learning fundamentals, including supervised and unsupervised learning, model selection, and evaluation techniques.
• Analytical Mindset: Strong analytical and problem-solving skills with attention to detail in data analysis and algorithm implementation.
• Team Collaboration: Ability to work collaboratively within a research environment, with effective communication skills to convey technical information clearly.

Preferred Experience

• Experience with version control systems, such as Git.
• Prior research experience or involvement in machine learning or data science projects is advantageous.
• Exposure to cloud computing platforms like AWS or GCP for ML model deployment (optional but a plus).

How to Apply

Interested applicants should submit their resume, a cover letter detailing their interest in the role, and any relevant project portfolios or coding samples that demonstrate their experience with ML and data analysis.

Job Info:

• Monday to Friday 8 - 5, Saturday 8 - 12
• Location: Bukit Batok

Responsibilities:

• Coordinate maintenance activities for facilities and equipment to ensure optimal performance and minimize downtime.
• Ensure the proper functioning and maintenance of machinery and equipment (such as genset, excavator etc) to support production and operational requirements.
• Coordinate tasks and resources across machinery & equipment maintenance team, and logistics & operations team to meet operational goals and deadlines.
• Oversee and ensure the Operations and Logistics adhere to safety measures during operations.
• Address operational issues and challenges, implementing solutions to maintain efficiency and productivity.
• As team leader in performing daily task, inclusive of daily reporting.

Requirements:

• Minimum diploma in maintenance or mechanical engineering.
• Minimum of 2 – 5 years of experiences in machinery and equipment field.
• Possess knowledge on the procedures in maintenance of equipment & machinery.
• Possess knowledge in logistics and operations will be advantages.
• Basic IT knowledge on software operating.
• Valid class 3 driving license (optional).
• People oriented, task oriented and possess positive work attitude.
• Strong organisational and communication skills.
• Ability to multitask, prioritize tasks, and manage time effectively.
• Problem-solving abilities and attention to detail.
• Willingness to travel to various project sites as required.

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

EA License No: 24C2352

EA Personnel No: R24123724

EA Personnel Name: Tiffany Ng Xin Yi

Duties and Responsibilities

• Communicate, promote and manage the company’s vision with respect to HSE standards, behaviour and performance.
• Communicate and promote a ‘Process Safety’ culture that supports continuous HSE improvement and actively engage workers through company-wide programs.
• Ensure appropriate resources are made available to develop, document, implement, maintain and comply with Process systems and programs.
• Regulatory and environmental compliance.
• Perform regular site inspections and training and Process safety meeting to assure safety and performance compliance.
• Ensure Process safety agenda, priority, and work plan were delivered as agreed,
• Perform employee performance reviews and continuous improvement programs.
• Conduct, perform, document and track Process Incident Reports and Incident Investigations.
• Develop and lead Process Hazard Analysis (HA) on existing and new processes.
• Develop and provide oversight and conduct audits for the site Management of Change (MOC) Process.
• Develop and provide oversight and conduct audits for Pre Start-up Safety Reviews(PSSR).
• Participate in Individual Disciplinary Action Discussion related to Safety or Performance Issues while working with Department Managers towards corrective action.
• Responsible for implementation and continual improvement of the site process safety, loss prevention and contractor safety.
• Perform any other duties as assigned.

Qualifications and Skills

• Diploma or Bachelor Degree preferable in Engineering.
• 5 years of supervisor and above.
• Preferably with 5 years of relevant working experience in oil and gas industry.
• Strong knowledge of process safety and good business sense.
• HAZOP and PSSR facilitator.