Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object[1]oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development.
• Experience in container development with docker in IoT devices.
• Prior experience in following areas Scrum AGILE methodology process is a plus: o Scrum AGILE methodology process o Develop and integrate embedded devices with cloud platforms o Develop and integrate vehicle side Information Technology for Public Transport (ITxPT) services, like GNSS and AVMS services. Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player

Responsibilities:

• Working in a team to design and develop a real-time, reliable and secured e-payment devices that processes millions of public transport commuters’ cards daily. The activities required to be performed shall include the following:
• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirement testing and production issues

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object[1]oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development.
• Experience in container development with docker in IoT devices.
• Prior experience in following areas Scrum AGILE methodology process is a plus: o Scrum AGILE methodology process o Develop and integrate embedded devices with cloud platforms o Develop and integrate vehicle side Information Technology for Public Transport (ITxPT) services, like GNSS and AVMS services. Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player

Responsibilities:

• Working in a team to design and develop a real-time, reliable and secured e-payment devices that processes millions of public transport commuters’ cards daily. The activities required to be performed shall include the following:
• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirement testing and production issues

Job Description

• Coordinate project management activities to ensure that projects are executed in a smooth and effective manner:
  • Liaise and coordinate site work matters with supervisor, clients, and relevant government authorities.
• Resolve site challenges proactively in a timely manner.
• Prepare project progress, claims and other reports.
• Carry out risk assessment and other risk management activities:
  • Make recommendations on risk control measures; and
  • Communicate Risk Assessments (RA) to concerned parties.
• Maintain and improve company reputation with clients
• Any other duties as assigned.

Qualifications & Other Requirements

• Relevant experience not required.
• Diploma/ Degree, preferably in Civil Engineering.
• Fresh graduates are welcome.
• Fluent in English.
• Singaporean / PR only

Working Hours

• Monday to Thursday: 0800hrs to 1800hrs;
• Friday: 0900hrs to 1800hrs

JOB SUMMARY

• We are looking for highly talented and ambitious individuals to join us as we embark on this journey of innovation, collaboration and co-creation. We're committed to promoting equality in the workplace and creating an inclusive and flexible culture - one where everyone can realise their full potential and make a positive contribution to our organisation. This in turn helps us to provide better support to our broad client base.
• As part of the Technology team, you will be a
• Techno banker involved in creating and designing cutting edge tools and applications that will redefine the future of banking
• Work in a truly Agile environment, as part of scrum teams that are striving to solve customer challenges
• Play a critical role in client journeys that help us make faster decisions to enhance the end-to-end client experience and achieve outcomes that are most valuable to our clients
• Part of a tribe of competence

RESPONSIBILITIES

Strategy
Desired Competencies:

• Proven ability to think out-of-the-box, fostering innovation and automation
• Analyse business problems and help to arrive at technically advanced solutions
• Proven ability that establish a strong team-player approach to problem solving
• Strong foundational knowledge of Algorithms, Data Structures, OOPs concepts and frameworks
• Curious learner, willing to learn and adapt to new technologies and frameworks
• Empowered mindset with ability to ask questions and seek clarifications
• Excellent communication skills that enable seamless interactions with colleagues globally
• Strong technical skills, with exposure to coding in any next-gen tech
• Awareness of Agile methodologies
• Object-oriented programming languages, i.e. Java, C#, Go
• Modern technologies like Microservices, UI frameworks –Angular, React, Lit
• Cloud technologies – AWS and Azure
• Middleware – Springboot, Nginx
• Gen AI/Prompt Engineering/Machine Learning algorithms

Regulatory & Business Conduct

• Display exemplary conduct and live by the Group’s Values and Code of Conduct.
• Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.
• Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance matters.

Our Ideal Candidate

• 2+ years’ experience in Designing, Developing and Maintaining Software Applications. Create efficient, reliable and scalable code for new software applications and/or improve existing ones. This includes both backend and frontend development (full-stack) based on project requirements
• Collaborate with Cross-Functional Teams. Work closely with product managers, designers and other stakeholders to understand requirements, provide input on feasibility, and deliver solutions aligned with business goals
• Conduct Code Reviews and Ensure Quality Standards. Participate in code reviews to improve code quality, ensure adherence to best practices and provide constructive feedback. Actively contribute to improving coding standards and development practices.
• Troubleshoot, Debug and Optimise Performance. Identify and fix bugs and performance bottlenecks in the software, ensuring a seamless user experience. Conduct regular testing to maintain high reliability and performance levels.
• Document Software and Technical Processes. Maintain clear and comprehensive documentation for code, technical designs and processes to facilitate knowledge sharing and support future maintenance

Membership

• Contribution to open source communities
• Participation in HackerRank/ Hackathons

Certifications - Certification from reputed development community like Google developer certification, Microsoft certified solution developer

Role Specific Technical Competencies

• Technical Skills and Coding Proficiency
• System Design & Architecture
• Analytical Thinking & Problem Solving
• Communication & Collaboration
• Adaptability & Continuous Learning

About Standard Chartered

We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.

Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.

Together we:

• Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do
• Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well
• Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term

What we offer

In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.

• Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.
• Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.
• Flexible working options based around home and office locations, with flexible working patterns.
• Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits
• A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.
• Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.

Recruitment Assessments

Some of our roles use assessments to help us understand how suitable you are for the role you've applied to. If you are invited to take an assessment, this is great news. It means your application has progressed to an important stage of our recruitment process.

Visit our careers website www.sc.com/careers

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

What You’ll Be Doing

• Design and implement innovative solutions for our full range of products.
• Build out industry-leading finanical platforms.
• Performance optimization for overall backend architecture aiming for low latency, high availability and scalability
• Build high availability high performance distributed service.
• Improve technology best practices and code reviews for peers.
• Work closely with Product, Design and Marketing teams to drive rapid innovation in cross-functional teams.

What We Look For In You

• Solid STEM (Science/Technology/Engineering/Mathematics) education background.
• Minimum 3 years of relevant experience in backend development.
• Strong logical thinking and problem-solving skills
• Fluent with high performance Java and async programming patterns.
• Familiar with distributed systems and micro service architecture.
• Experience in practicing automated testing and continuous integration
• Experience working with teams across offices and time zones.

Nice to Have

• Willing to learn all aspects of trading products in financial and crypto markets, including spot, future, swap, options, and structured products.
• Proficiency in speaking, reading and writing in both English and Mandarin to collaborate effectively with global and cross-functional team members.

Job Scope:

1. Proficient with AutoCAD and Microsoft Office
2. Highly motivated and independent
3. Able to work individually and as a team
4. Perform project coordination, working on-site and in office

Qualification:

1. Bachelor
2. Diploma or equivalent

Location:

• Eunos (Opposite Singapore Post)
• Nearest MRT (Paya Lebar)

Thank you for your application and we regret only shortlisted candidates will be notified.

The Cloud Infrastructure Engineering team builds and manages the foundational blocks of ClickHouse Cloud data plane end-to-end. This includes compute, networking, security, and a multi-cloud, multi-region architecture that provides a reliable and scalable managed ClickHouse experience for ClickHouse Cloud customers. Our team is looking for highly skilled and experienced cloud infrastructure software engineers to join our team, who will be responsible for designing, deploying, and maintaining our infrastructure.

What will you do?

• Architect and build a robust, scalable, and highly available distributed infrastructure.
• Build a cutting-edge cloud-native platform on top of the public cloud, and automate our cloud resource management.
• Work closely with our ClickHouse core database development team, and security team and partner with them to produce the SAS offering.
• Work on routing and traffic components to improve the reliability and scalability of our cloud service.
• Systematically improve availability by applying industry and distributed systems best practices.
• Design and build security components & tooling: firewall, PKI and certificate infra, zero trust network, etc.
• Improve performance and cost efficiency of our infrastructure.

About you:

• You have 5+ years of relevant software development industry experience building and operating scalable, fault-tolerant, distributed systems.
• Software development experience in Go, C/C++, Java, or similar.
• Experience with cloud technologies such as AWS, Azure, or GCP, including infrastructure-as-code (IaC) tools such as Terraform or CloudFormation.
• Experience developing cloud infrastructure services, preferably with Kubernetes.
• Experience developing cloud native edge or service mesh services, preferably with envoy and Istio.
• Experience leading and shipping large scope technical projects in collaboration with multiple experienced engineers.
• Understanding of network topologies, protocols, and security principles, such as VPNs, firewalls, and load balancers.
• Knowledge of cloud security best practices, including encryption, access controls, and compliance standards like SOC2 and GDPR.
• You have excellent communication skills and the ability to work well within a team and across engineering teams.
• You are a strong problem solver and have solid production debugging skills.
• You are passionate about efficiency, availability, scalability and data governance.
• You thrive in a fast paced environment, and see yourself as a partner with the business with the shared goal of moving the business forward.
• You have a high level of responsibility, ownership, and accountability

• Able to read and understand construction drawings and detect discrepancies for combined services.
• Responsible for the smooth and timely completion of projects
• Maintain all operational documentations and records
• Monitor and review performance of mechanics and draughtman
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• Prepare and issue of weekly and Monthly QA/QC reports.
• Manage projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications to ensure cost control, maintain project timeline, manage manpower resources for the project.
• Undertake ad-hoc responsibilities assigned by sale manager / director

Requirements

• Degree in Mechanical Engineering
• At least 2 years experiences, preferably in the building & construction.
• Ability to work under pressure and to tight deadlines.
• Ability to communicate complex concepts
• Able to work independently and in a team
• Good interpersonal, analytical and problem-solving skills
• Required to travel to construction sites and analyze the deployed machineries' repair status when the need arises.
• Good understanding of local regulatory and code requirements.

Candidate is expected to carry out Test Board Maintenance activities (Visual inspection, testing, framing, rework, washing, drying, packing etc)

Candidate is also expected to identify issues by recognizing data trends and to be able to read diagram and information from circuit.

Candidate must be driven and able to work independently and systematically to maintain delivery of excellent services.

Basic mechanical, electrical and programming knowledge is preferred to facilitate troubleshooting and root cause analysis.

Responsibilities and Duties

• Repair and maintenance of Test Board

• Maintain max passing yield results

• Test Board Maintenance activities (Perform socket replacement and testing)

• Identify Issues

• Reporting of service activities

• Management of spare socket inventory

• Technical service on industrial chambers

Requirements

Service Engineer – Diploma in Engineering

Technical Specialist – Diploma in Engineering

1 - 2 Years Experience

Strong in hands-on, able to work independently with minimum supervision

Able to do soldering work on tiny component

Technical Specialist will assist Service Engineer in above duties. Diploma holders demonstrating good technical capabilities will be considered for Service Engineer

Able to do soldering work on tiny component

Job Scope:

• Supervise site operations and daily activities on construction or engineering sites
• Manage project timelines to ensure the project stays on schedule
• Coordinate with contractors, subcontractors, and suppliers for timely delivery of materials and services
• Ensure quality control by conducting site inspections and monitoring work to meet design specifications
• Monitor and enforce safety standards to comply with health and safety regulations
• Manage resources, including manpower, equipment, and materials for project efficiency
• Provide technical support and troubleshoot issues as they arise on-site
• Review plans, blueprints, and technical drawings, offering feedback and solutions
• Prepare daily and weekly progress reports for senior engineers or project managers
• Maintain accurate project documentation, including records of site activities and materials used
• Assist in cost control by monitoring project expenses and tracking material usage
• Supervise the installation of systems or equipment as required
• Collaborate with design engineers, architects, and other stakeholders to ensure project alignment with design
• Conduct and participate in site meetings to discuss progress, challenges, and next steps

Requirements:

• Degree in Civil Engineering or equivalent
• 3-5 years of relevant experience, with at least 2-3 years in LTA underground or MRT projects
• Experienced in managing underground projects, including D-wall, borepiling, and other structural works in Singapore.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

JOB SCOPE
Responsible for executing the company projects in building construction which covers.

• To review project specifications and technical clarifications
• To prepare method statements and check drawing discrepancies
• To carry out project planning, design, material requisition, cost control, project supervision and documentation
• To supervise the construction works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• To target and ensure timely and smooth progress of works
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

JOB REQUIREMENTS

• Minimum a degree in Civil/Structural Engineering
• Minimum 5 years working experience in building construction
• Use of Autocad would be an advantage
• Proficient in using Microsoft Office and familiar with Microsoft Project
• Good communicative skills, able to interact with people of all levels and teamwork

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object[1]oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development.
• Experience in container development with docker in IoT devices.
• Prior experience in following areas Scrum AGILE methodology process is a plus: o Scrum AGILE methodology process o Develop and integrate embedded devices with cloud platforms o Develop and integrate vehicle side Information Technology for Public Transport (ITxPT) services, like GNSS and AVMS services. Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player

Responsibilities:

• Working in a team to design and develop a real-time, reliable and secured e-payment devices that processes millions of public transport commuters’ cards daily. The activities required to be performed shall include the following:
• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirement testing and production issues

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

(ll) Requirements

Education

• Bachelor's degree in Mechanical, Electrical, or a related field.

Experience

• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards.

Skills & knowledge

• Profound knowledge of M&E and piping systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Job Description: Software Engineer

As a Software Engineer at D-SIMLAB Technologies, you will gain exposure to both technical and soft skills development while working on innovative software solutions for world-leading semiconductor manufacturers. This role extends beyond software development, involving close collaboration with clients and providing professional consultation services to support their operational needs.

Key Responsibilities:

• Software Product Deployment and Delivery:
  Collaborate with a team of Software Engineers and Data Scientists to ensure smooth deployment and delivery of D-SIMLAB’s software products at semiconductor manufacturing sites. Work with global clients to address their technical needs and deliver high-quality solutions.
• Product Enhancement:
  Contribute to the continuous improvement of D-SIMLAB’s software, focusing on areas such as data visualization and algorithm optimization to improve product quality and user experience. Actively participate in product development cycles, from conceptualization to implementation.
• Key Software Component Development:
  Take ownership of the development and maintenance of critical software components, ensuring scalability, performance, and reliability in diverse manufacturing environments.
• Client Consultation:
  Provide technical expertise and consultation to customers, helping them implement and optimize D-SIMLAB’s software solutions in their manufacturing processes.
  Assist in troubleshooting and problem-solving to enhance client satisfaction.
• Collaboration and Innovation:
  Work in a multicultural and multidisciplinary team, contributing to innovative ideas and technical solutions. Stay updated on the latest technology trends and actively seek ways to improve the efficiency and performance of the software.

Candidate Requirements:

• Education:
  Bachelor’s or Master’s degree in Computer Science, Software Engineering, Industrial Engineering, or a related field.
  Diploma holders with relevant experience are encouraged to apply.
• Technical Skills:
  Strong skills in C#, .NET, SQL.
  Familiarity with software development life cycles, agile methodologies, and version control systems.
  Experience with algorithms, data structures, and software architecture design.
  Experience with visualization frameworks and tools is an advantage.
• Soft Skills:
  Strong interpersonal and communication skills, with the ability to work effectively with clients and teams from different technical and cultural backgrounds.
• Adaptability and Willingness to Travel:
  Willingness to travel internationally and work on challenging projects at semiconductor manufacturing sites. Ability to adapt quickly to new environments and work under pressure to meet project deadlines.
• Career Growth:
  Interest in personal and professional growth by enhancing both technical and soft skills.Fresh graduates are welcome to apply.

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests
  

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
  Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision
  

Installation, commissioning and modification of marine switch boards and systems

Breaker calibration and testing.

Handling projects as requested by ship yard.

Testing and servicing of devices listed below

Gauges as well as transmitters for Temperature and pressure (VDO).

Safety devices for generators such as over current protection relays, reverse power protection relays (Omron, DEIF, and Crompton).

Panels such as engine alarm panel, fire alarm panel and bilge alarm panel.

Electrical instruments such as Voltmeter, ammeter, frequency meter, power factor meter & kilo wattmeter (DEIF, & selco).

Switchgears (Mitsubishi, Terasaki, Merlin gerin, & Siemens).

Testing, trouble shooting and upgrading the following panels

Diesel and shaft Generators(Caterpillar and Cummins)

Main and emergency switch boards

Generator set control panels

Fire detection system

Tank alarm system

Cranes

Navigation lights

Motors

Starters including variable drives and soft starter.

Candidate with experience as stated below will be an added advantage:-

a. Working with LTA and related Agencies

b. Underground pipe laying for Power & Telco

c. Road Works (Milling & Patching)

d. ERSS - Earth Retaining Support Sysytem

e. Site management and coordinations

f. Proper communications and detailed information flow

Infrastructure & Platform Services Team
You will help to build and sustain strong technology foundations forming the bedrock of our digital solutions.

What impact can you make in this role?
We are looking for Lead Cloud Engineer, who will enable our Cloud Native transformation efforts in alignment with the next iteration of our customer’s technology transformation journey, all with the goal of driving developer velocity and therefore business agility and value. This role will see synergistic collaboration with senior leadership and teams/squads of product-minded architects, engineers, and application developers, who are passionate about “building cloud applications and not just applications in the cloud”.

What will you do as an Cloud Engineer, Technology Group?

Enable Cloud Native transformation strategy and roadmap

• Enable the next iteration of cloud strategy by planning and executing against the vision for an agile organization that leverages cloud native to take full advantage of cloud computing
• Communicate the case for and benefits of increased cloud native adoption to senior stakeholders, business units and business solution teams
• Enable roadmaps and pathways for the rationalization and modernization of applications to just-right cloud services, platform, and architecture within our hybrid cloud (public and private) ecosystem
• Measure and track progress of cloud strategy through the development of effective Key Performance Indicators (KPIs) that set the conditions for successful cloud native adoption, culture, behaviour, and differentiating business outcomes

Enable Cloud Centre of Practice and Excellence

• Champion and exemplify cloud native practices, including cloud native philosophy, architecture, principles, and culture
• Lead product management, including research and proof-of-concept, for emerging cloud native services and platforms, for example, enterprise containerization, landing zones, orchestration, and automation
• Define cloud reference architecture, standards, and processes within the enterprise, for example, provide opinionated landing zones that comprise a set of policies or rules to enforce a security baseline and prevent non-compliant activities
• Perform cloud governance role in disciplines like identity & access management, tenant/account management, security & compliance, and billing
• Provide common tooling, solutions, and patterns for cloud native adoption and developer enablement, productivity, and self-service
• Assist application and developer teams to onboard applications to hybrid cloud (public and/or private) services and platforms
• Provide education and learning opportunities to enable teams to understand existing and emerging cloud computing technologies, as part of overall cloud capabilities building

Deliver Cloud Engineering and Operations

• Implement opinionated set of technologies, on top of cloud service provider(s), to consolidate institutional knowledge, tooling, patterns and practices; and deployable artifacts to production
• Provision cloud services to developer teams based on pre-stipulated service level agreements
• Manage the maintenance of virtual appliances, for example, AMI, and base container images
• Manage cloud operations disciplines like patch management, network configuration, certificate management, logging agents, and intrusion detection
• Steward cloud spend and budget, including the monitoring of cumulative usage, identifying of areas for optimization, managing reserved instances (RI) and negotiating on committed spend agreements
• Manage support vendor partnerships through regular vendor stewardship meetings and service level and escalation reporting

Provide technical leadership

• Provide technical coaching and mentoring to enterprise architects, application and infrastructure teams on cloud native architecture, philosophy, and practices

What qualifications or skills should you possess in this role?

• At least 8 years of relevant experience in delivering hybrid cloud strategies, operating models, and technology service management practices
• Bachelor’s Degree or Master’s in Computer Science, Information Technology or equivalent
• Some return-on-investment and business case development experience
• Strong communication abilities to influence key stakeholders ranging from C-level executives, MDs, CISO, application architects and subject matter experts
• Proven track record of delivering cloud applications on Amazon AWS and Microsoft Azure using cloud-native design and patterns
• Proven experience in designing microservices, event driven architecture using open source, .NET, NodeJS, Python, Java, message queues, streaming, databases, and cloud data services
• Extensive experience in architecting applications and automation technologies to meet the expected standards of availability, agility, capacity, resiliency, and security
• Hands-on experience with cloud technologies including, Docker, Kubernetes (particularly RedHat OpenShift 4.x), Infrastructure as Code, Service Mesh, Immutable Infrastructure, and declarative APIs
• Hands-on experience automating full lifecycle management of application hosting platforms in data center and public cloud using DevOps practices and CI/CD methodologies
• Strong understanding of Infrastructure and Platform Automation technology products such as Amazon CloudFormation, VMware vRealize Suite, HashiCorp Suite, Puppet, Ansible, and Chef
• Strong understanding of AGILE, LEAN or SaFE methodology
• Strong understanding and knowledge of industry technology standards, and security & compliance frameworks (e.g. NIST, CIS, CSM) and experience working with audit and regulatory bodies
• One or more AWS/Azure Certifications at Professional and/or Specialty level

The Quality Engineer applies engineering principles and techniques to meet the quality targets and organisational objectives in a manufacturing environment. He/She also assists in analysing manufacturing and quality issues make recommendations for out of control processes.

In addition, the Quality Engineer participates in quality improvement projects in accordance with organisational objectives.

The Quality Engineer is required to have strong communication skills, good teamwork and an analytical mind to perform his/her role well to achieve the desired organisational outcomes.

~ Assist in implementation of improvement projects.
~ Attend to internal or external audits related issues.
~ Collect data for analysis.
~ Enforce practices of good safety culture and good manufacturing practices.
~ Ensure adherence to processes and procedures.
~ Ensure all quality plans are properly documented and maintained.
~ Ensure no expired tools running in the production line.
~ Facilitate the implementation of quality system in the organisation.
~ Identify opportunity for continuous improvement projects.
~ Implement calibration cost reduction activities.
~ Interpret information provided by the network/dashboard for quality performance monitoring.
~ Maintain production yield targets.
~ Monitoring quality control and assurance processes.
~ Perform evaluation/experiments.
~ Supervise manufacturing work for workplace safety and health compliance.

1. Plan, design and construction management of Mechanical services for all types of building projects.
2. Mechanical services include Air-conditioning & mechanical ventilation system, fire protection system, sanitary, plumbing, gas and swimming pool filtration systems.
3. Provide support in project management and contract administration for building engineering contracts.

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Supervise concreting, pavement, drainage construction works (applicable for C&S);
• Carry out checks on compaction and curing of concrete (applicable for C&S);
• Carry out checks on striking of formwork, re-props and removal of props (applicable for C&S);
• Carry out checks on quality & erection of precast components (applicable for C&S);
• Check on structural steel works (applicable for C&S);
• Check and assess temporary works and ERSS by the contractors to ensure that the C&S, M&E and building works are safe and in compliance with all relevant regulations;
• Carry out coordination of all services, help resolve contractors’ queries and provide feedback on site issues, discrepancies and irregularities to QP(S), project consultants and/or CAG ;
• Review contractor’s submissions (shop drawings, method statements, risk assessment, test plans, soil sample test results, test cube results, DSM core results etc), and report any non-compliance with the Contract and authority’s requirements to CAG, the project consultants and/or QP(S);
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies;
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings;
• Attend QAQC meetings, monitor and check on quality on all works and materials on site; take measures to rectify any non-compliance and report of any materials that are not conforming to the Specifications;
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works;
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site;
• To review all drawings (including shop drawings, construction drawings) and method statements and risk assessments to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Contractor / QPs, including checking of as-built drawings and Operation & Maintenance Manual submitted by the contractors and ensuring that the required construction tests associated with the construction works are carried out where necessary;
• Coordinate and compile the As-Built information for record purposes timely.
• Monitor the quality and progress of defects rectification works when necessary.
• Ensure that daily records of all civil and structural engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, site diary, labour force, day works,provisional items or provisional quantities etc, are updated in a timely manner and properly kept;
• Keep accurate records of variations as instructed or approved and to maintain a set of updated drawings on site;
• Together with the safety team, provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site, provide safety oversight and ensure main contractors and their sub contractors adhere to the approved safe work
• procedures for the works and all relevant CAG and regulatory safety requirements; ensure mitigation controls in updated risk registers (Programme/Aerodrome/DfS) are duly implemented on site;
• Liaise with all relevant authorities;
• Adhere to the shift duty roster assigned;
• Undertake any other duties includign administrative tasks related to the project as and when instructed by the SRE, Consultants or CAG

Qualification:

• Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 3 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;
• Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;
• Lead C&S and/or geotechnical site staff to monitor, supervise and inspect works as directed by CAG, QP(S), SRE, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal skills;
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;
• Possess strong supervision and leadership skills;
• Must be willing to work shifts.

• To involve in the planning and design of mechanical engineering works for building services.
• To prepare tender documents, design and technical specifications for tenders, as well as supervise the installation and commissioning of mechanical works.
• Able to liaise both end user customers and vendor and supplier for project coordination.
• Onsite support upon customer request if necessary to have first-hand look for project requirement.
• Responsible for all on-site technical and engineering matters
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems
• To read and draw technical drawing
• Well versed in Autocad
• Material Procurement
• Assist Manager in Project Integration
• Strong analytical, Problem solving & Decision Making Skill

We transform Industrial Waste into Metals, Minerals, Specialty Chemicals and Energy.

We are seeking spirited Individuals with high positive energy levels. Happy Individuals with a passion for the

Environment and Sustainability. Individuals that want to make a difference. You must be a resourceful problem solver, with excellent people skills. To be part of our Green engineering team to maintain our High Temperature Incinerator, and Industrial Waste Water Treatment System for Hazardous Waste, and Waste Plastic to Oil Conversion.

• Candidate must possess at least Diploma in Engineering (Industrial, Mechanical, Mechatronic/Electromechanical, Electrical) or equivalent.
• At least 3 Year(s) of working experience in active preventive maintenance.
• Familiar with pumps, motors, control panels, piping, elevtricals wiring.
• Preferably with a specialise skill such as Welding, Pneumatics, Hydraulics, Piping, Instrumentation & Controls etc.
• Certifications in Safety and/or other specialities
• Handle a team of technicians

Job Description
As a BIM Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.