JOB SCOPE
Responsible for executing the company projects in building construction which covers.

• To review project specifications and technical clarifications
• To prepare method statements and check drawing discrepancies
• To carry out project planning, design, material requisition, cost control, project supervision and documentation
• To supervise the construction works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• To target and ensure timely and smooth progress of works
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

JOB REQUIREMENTS

• Minimum a degree in Civil/Structural Engineering
• Minimum 5 years working experience in building construction
• Use of Autocad would be an advantage
• Proficient in using Microsoft Office and familiar with Microsoft Project
• Good communicative skills, able to interact with people of all levels and teamwork

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object[1]oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development.
• Experience in container development with docker in IoT devices.
• Prior experience in following areas Scrum AGILE methodology process is a plus: o Scrum AGILE methodology process o Develop and integrate embedded devices with cloud platforms o Develop and integrate vehicle side Information Technology for Public Transport (ITxPT) services, like GNSS and AVMS services. Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player

Responsibilities:

• Working in a team to design and develop a real-time, reliable and secured e-payment devices that processes millions of public transport commuters’ cards daily. The activities required to be performed shall include the following:
• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirement testing and production issues

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

(ll) Requirements

Education

• Bachelor's degree in Mechanical, Electrical, or a related field.

Experience

• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards.

Skills & knowledge

• Profound knowledge of M&E and piping systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Job Description: Software Engineer

As a Software Engineer at D-SIMLAB Technologies, you will gain exposure to both technical and soft skills development while working on innovative software solutions for world-leading semiconductor manufacturers. This role extends beyond software development, involving close collaboration with clients and providing professional consultation services to support their operational needs.

Key Responsibilities:

• Software Product Deployment and Delivery:
  Collaborate with a team of Software Engineers and Data Scientists to ensure smooth deployment and delivery of D-SIMLAB’s software products at semiconductor manufacturing sites. Work with global clients to address their technical needs and deliver high-quality solutions.
• Product Enhancement:
  Contribute to the continuous improvement of D-SIMLAB’s software, focusing on areas such as data visualization and algorithm optimization to improve product quality and user experience. Actively participate in product development cycles, from conceptualization to implementation.
• Key Software Component Development:
  Take ownership of the development and maintenance of critical software components, ensuring scalability, performance, and reliability in diverse manufacturing environments.
• Client Consultation:
  Provide technical expertise and consultation to customers, helping them implement and optimize D-SIMLAB’s software solutions in their manufacturing processes.
  Assist in troubleshooting and problem-solving to enhance client satisfaction.
• Collaboration and Innovation:
  Work in a multicultural and multidisciplinary team, contributing to innovative ideas and technical solutions. Stay updated on the latest technology trends and actively seek ways to improve the efficiency and performance of the software.

Candidate Requirements:

• Education:
  Bachelor’s or Master’s degree in Computer Science, Software Engineering, Industrial Engineering, or a related field.
  Diploma holders with relevant experience are encouraged to apply.
• Technical Skills:
  Strong skills in C#, .NET, SQL.
  Familiarity with software development life cycles, agile methodologies, and version control systems.
  Experience with algorithms, data structures, and software architecture design.
  Experience with visualization frameworks and tools is an advantage.
• Soft Skills:
  Strong interpersonal and communication skills, with the ability to work effectively with clients and teams from different technical and cultural backgrounds.
• Adaptability and Willingness to Travel:
  Willingness to travel internationally and work on challenging projects at semiconductor manufacturing sites. Ability to adapt quickly to new environments and work under pressure to meet project deadlines.
• Career Growth:
  Interest in personal and professional growth by enhancing both technical and soft skills.Fresh graduates are welcome to apply.

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests
  

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
  Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision
  

Installation, commissioning and modification of marine switch boards and systems

Breaker calibration and testing.

Handling projects as requested by ship yard.

Testing and servicing of devices listed below

Gauges as well as transmitters for Temperature and pressure (VDO).

Safety devices for generators such as over current protection relays, reverse power protection relays (Omron, DEIF, and Crompton).

Panels such as engine alarm panel, fire alarm panel and bilge alarm panel.

Electrical instruments such as Voltmeter, ammeter, frequency meter, power factor meter & kilo wattmeter (DEIF, & selco).

Switchgears (Mitsubishi, Terasaki, Merlin gerin, & Siemens).

Testing, trouble shooting and upgrading the following panels

Diesel and shaft Generators(Caterpillar and Cummins)

Main and emergency switch boards

Generator set control panels

Fire detection system

Tank alarm system

Cranes

Navigation lights

Motors

Starters including variable drives and soft starter.

Candidate with experience as stated below will be an added advantage:-

a. Working with LTA and related Agencies

b. Underground pipe laying for Power & Telco

c. Road Works (Milling & Patching)

d. ERSS - Earth Retaining Support Sysytem

e. Site management and coordinations

f. Proper communications and detailed information flow

Infrastructure & Platform Services Team
You will help to build and sustain strong technology foundations forming the bedrock of our digital solutions.

What impact can you make in this role?
We are looking for Lead Cloud Engineer, who will enable our Cloud Native transformation efforts in alignment with the next iteration of our customer’s technology transformation journey, all with the goal of driving developer velocity and therefore business agility and value. This role will see synergistic collaboration with senior leadership and teams/squads of product-minded architects, engineers, and application developers, who are passionate about “building cloud applications and not just applications in the cloud”.

What will you do as an Cloud Engineer, Technology Group?

Enable Cloud Native transformation strategy and roadmap

• Enable the next iteration of cloud strategy by planning and executing against the vision for an agile organization that leverages cloud native to take full advantage of cloud computing
• Communicate the case for and benefits of increased cloud native adoption to senior stakeholders, business units and business solution teams
• Enable roadmaps and pathways for the rationalization and modernization of applications to just-right cloud services, platform, and architecture within our hybrid cloud (public and private) ecosystem
• Measure and track progress of cloud strategy through the development of effective Key Performance Indicators (KPIs) that set the conditions for successful cloud native adoption, culture, behaviour, and differentiating business outcomes

Enable Cloud Centre of Practice and Excellence

• Champion and exemplify cloud native practices, including cloud native philosophy, architecture, principles, and culture
• Lead product management, including research and proof-of-concept, for emerging cloud native services and platforms, for example, enterprise containerization, landing zones, orchestration, and automation
• Define cloud reference architecture, standards, and processes within the enterprise, for example, provide opinionated landing zones that comprise a set of policies or rules to enforce a security baseline and prevent non-compliant activities
• Perform cloud governance role in disciplines like identity & access management, tenant/account management, security & compliance, and billing
• Provide common tooling, solutions, and patterns for cloud native adoption and developer enablement, productivity, and self-service
• Assist application and developer teams to onboard applications to hybrid cloud (public and/or private) services and platforms
• Provide education and learning opportunities to enable teams to understand existing and emerging cloud computing technologies, as part of overall cloud capabilities building

Deliver Cloud Engineering and Operations

• Implement opinionated set of technologies, on top of cloud service provider(s), to consolidate institutional knowledge, tooling, patterns and practices; and deployable artifacts to production
• Provision cloud services to developer teams based on pre-stipulated service level agreements
• Manage the maintenance of virtual appliances, for example, AMI, and base container images
• Manage cloud operations disciplines like patch management, network configuration, certificate management, logging agents, and intrusion detection
• Steward cloud spend and budget, including the monitoring of cumulative usage, identifying of areas for optimization, managing reserved instances (RI) and negotiating on committed spend agreements
• Manage support vendor partnerships through regular vendor stewardship meetings and service level and escalation reporting

Provide technical leadership

• Provide technical coaching and mentoring to enterprise architects, application and infrastructure teams on cloud native architecture, philosophy, and practices

What qualifications or skills should you possess in this role?

• At least 8 years of relevant experience in delivering hybrid cloud strategies, operating models, and technology service management practices
• Bachelor’s Degree or Master’s in Computer Science, Information Technology or equivalent
• Some return-on-investment and business case development experience
• Strong communication abilities to influence key stakeholders ranging from C-level executives, MDs, CISO, application architects and subject matter experts
• Proven track record of delivering cloud applications on Amazon AWS and Microsoft Azure using cloud-native design and patterns
• Proven experience in designing microservices, event driven architecture using open source, .NET, NodeJS, Python, Java, message queues, streaming, databases, and cloud data services
• Extensive experience in architecting applications and automation technologies to meet the expected standards of availability, agility, capacity, resiliency, and security
• Hands-on experience with cloud technologies including, Docker, Kubernetes (particularly RedHat OpenShift 4.x), Infrastructure as Code, Service Mesh, Immutable Infrastructure, and declarative APIs
• Hands-on experience automating full lifecycle management of application hosting platforms in data center and public cloud using DevOps practices and CI/CD methodologies
• Strong understanding of Infrastructure and Platform Automation technology products such as Amazon CloudFormation, VMware vRealize Suite, HashiCorp Suite, Puppet, Ansible, and Chef
• Strong understanding of AGILE, LEAN or SaFE methodology
• Strong understanding and knowledge of industry technology standards, and security & compliance frameworks (e.g. NIST, CIS, CSM) and experience working with audit and regulatory bodies
• One or more AWS/Azure Certifications at Professional and/or Specialty level

The Quality Engineer applies engineering principles and techniques to meet the quality targets and organisational objectives in a manufacturing environment. He/She also assists in analysing manufacturing and quality issues make recommendations for out of control processes.

In addition, the Quality Engineer participates in quality improvement projects in accordance with organisational objectives.

The Quality Engineer is required to have strong communication skills, good teamwork and an analytical mind to perform his/her role well to achieve the desired organisational outcomes.

~ Assist in implementation of improvement projects.
~ Attend to internal or external audits related issues.
~ Collect data for analysis.
~ Enforce practices of good safety culture and good manufacturing practices.
~ Ensure adherence to processes and procedures.
~ Ensure all quality plans are properly documented and maintained.
~ Ensure no expired tools running in the production line.
~ Facilitate the implementation of quality system in the organisation.
~ Identify opportunity for continuous improvement projects.
~ Implement calibration cost reduction activities.
~ Interpret information provided by the network/dashboard for quality performance monitoring.
~ Maintain production yield targets.
~ Monitoring quality control and assurance processes.
~ Perform evaluation/experiments.
~ Supervise manufacturing work for workplace safety and health compliance.

1. Plan, design and construction management of Mechanical services for all types of building projects.
2. Mechanical services include Air-conditioning & mechanical ventilation system, fire protection system, sanitary, plumbing, gas and swimming pool filtration systems.
3. Provide support in project management and contract administration for building engineering contracts.

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Supervise concreting, pavement, drainage construction works (applicable for C&S);
• Carry out checks on compaction and curing of concrete (applicable for C&S);
• Carry out checks on striking of formwork, re-props and removal of props (applicable for C&S);
• Carry out checks on quality & erection of precast components (applicable for C&S);
• Check on structural steel works (applicable for C&S);
• Check and assess temporary works and ERSS by the contractors to ensure that the C&S, M&E and building works are safe and in compliance with all relevant regulations;
• Carry out coordination of all services, help resolve contractors’ queries and provide feedback on site issues, discrepancies and irregularities to QP(S), project consultants and/or CAG ;
• Review contractor’s submissions (shop drawings, method statements, risk assessment, test plans, soil sample test results, test cube results, DSM core results etc), and report any non-compliance with the Contract and authority’s requirements to CAG, the project consultants and/or QP(S);
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies;
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings;
• Attend QAQC meetings, monitor and check on quality on all works and materials on site; take measures to rectify any non-compliance and report of any materials that are not conforming to the Specifications;
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works;
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site;
• To review all drawings (including shop drawings, construction drawings) and method statements and risk assessments to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Contractor / QPs, including checking of as-built drawings and Operation & Maintenance Manual submitted by the contractors and ensuring that the required construction tests associated with the construction works are carried out where necessary;
• Coordinate and compile the As-Built information for record purposes timely.
• Monitor the quality and progress of defects rectification works when necessary.
• Ensure that daily records of all civil and structural engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, site diary, labour force, day works,provisional items or provisional quantities etc, are updated in a timely manner and properly kept;
• Keep accurate records of variations as instructed or approved and to maintain a set of updated drawings on site;
• Together with the safety team, provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site, provide safety oversight and ensure main contractors and their sub contractors adhere to the approved safe work
• procedures for the works and all relevant CAG and regulatory safety requirements; ensure mitigation controls in updated risk registers (Programme/Aerodrome/DfS) are duly implemented on site;
• Liaise with all relevant authorities;
• Adhere to the shift duty roster assigned;
• Undertake any other duties includign administrative tasks related to the project as and when instructed by the SRE, Consultants or CAG

Qualification:

• Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 3 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;
• Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;
• Lead C&S and/or geotechnical site staff to monitor, supervise and inspect works as directed by CAG, QP(S), SRE, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal skills;
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;
• Possess strong supervision and leadership skills;
• Must be willing to work shifts.

Production Packer | Gross can reach $2300 | Admiralty

Working hours: Monday to Friday 8am-5.45pm
Meal Break: 45 mins
Tea Break: 15mins
Salary : $1,600 + Allowances + OT
Gross : $$2000-$2300
Location : Woodlands Terrace
Company transport provided at various area (Yishun, Admiralty, Woodlands, Marsiling, Lakeside)

Job Description:

• Responsible for daily manufacturing operations
• To received Finished Products from production
• Picking, packing plastic audio buttons & panels

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Job Description:

• Involvement in Production testing scope.

• Operates and maintains simple test equipment appropriately to measure and perform RF PCBA & module tuning and testing

• Perform duties with minimal supervision

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

• Set up and run HASS to qualify the modules under testing conditions.

• Conduct a Functional Acceptance Test to complete the module test process.

• Maintaining the operations of the ATE stations

• To generate test reports

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

Job Requirement:

• Education background : ITE or Diploma in Electronics / Communication Engineering or related studies

• On the job training will be provided.

• Prior experience working in electronics (modules) production / manufacturing environment

• Competent handling of miniature with tweezers

• Ability to handle and solder components using a microscope

• Ability to produce consistent quality workmanship on repetitive manual processes

• Work Location: Ang Mo Kio

Knowledge, Skills, Competencies

• Able to understand mechanical and electrical wiring diagram with some basic understanding of cable termination.

• Experience with network design and networking exposure will be added advantage

• Good knowledge with Operating platform such as Microsoft Windows and Linux

• Proficiency in operating measuring equipment or software such as network analyser, serial protocol analyser and oscilloscope

Benefits Summary:

• Up $5000 + Bonus + Benefits
• 5 Days work week
• Working Location: North, East

Responsibilities:

• Define inspection and test plan for product
• Design jigs for critical to quality alignments
• Evaluate engineering changes of assigned product.
• Provide technical expertise of manufacturing process to PAG
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6582693981

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Project Engineer

Basic: $2,700 - $3,800
Working Hours: 5 Days Mon-Fri (830am to 530pm)
Location: Jalan Kilang Timor, Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Able to manage project with minimal supervision;
• Attends external project kick-off meetings, meetings with clients or consultants as well as technical and co-ordination meetings, project meetings and internal project closure meeting;
• Ensures the adherence to the safe work procedure (SWP) established; and implement risk control measures;
• Resolves site problems proactively in a timely manner;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by reducing materials wastage, usage of tools and equipment, etc;
• Request and initiate orders of materials required for projects;
• Documentation on project progress and damage;
• Ensures proper project documentation including email communication;
• Any other related duties as assigned.

Requirement

• Degree in Mechanical Engineering or. Diploma in Mechanical Engineering with working experience.
• Knowledgeable in MS Office, MS Project and able to read construction drawing.
• Training Provided

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Role: Service Engineer - ACMV
Duration: 1 year contract (Renewable and Convertible)
Location: Multiple locations - Changi Business Park Crescent, Asian Square Tower, Orchard Rd
Working hours: 12 hours shift; 4 days a week. 4/3/4/3 shift pattern
Salary: Up to $3.5k + 1 month bonus

As an HVAC Technician, he will maintain mechanical and electrical equipment for commercial HVAC systems at facilities by conducting proactive performance testing and ongoing scheduled maintenance.

Core Responsibilities:

• Install, repair, adjust, and maintain small electric or pneumatic control systems used for building. This includes heating, ventilation, air conditioning, and refrigeration systems and equipment.
• Conduct ongoing maintenance on building HVAC equipment to ensure proper equipment operation and compliance with all applicable codes, regulations, and work safety.
• Troubleshoot equipment failures and determine the best course of action for equipment modifications.
• Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion.

Requirements:

• Nitec / Diploma with 1 - 2 years of job-related experience.
• Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 20kg or more.
• Ability to follow basic work routines and standards in the application of work.
• Communication skills to exchange straightforward information.
• Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.

We regret to inform you that only shortlisted candidates will be notified.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/8809

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

Senior Data Engineer ( Informatica and Azure Data Factory)

Job Requirement:

• Data Engineers with experience in Informatica, Azure Data Factory, Databricks, or Microsoft Fabric typically have responsibilities centered around designing, implementing, and managing data pipelines and architectures that support data integration, transformation, and analytics within a cloud-based or hybrid environment.
• Design and implement ETL (Extract, Transform, Load) workflows using Informatica PowerCenter, Informatica Cloud, or Informatica Intelligent Cloud Services (IICS)
• Build and manage ETL and ETL data pipelines using Azure Data Factory (ADF) to orchestrate data movement and transformation across on-premises and cloud environments.
• Create and optimize Spark-based data pipelines in Databricks, using notebooks or jobs to ingest, clean, and transform large datasets for analytics and reporting.
• Work with Microsoft Fabric to integrate and manage dataflows, datasets, and transformation processes across its unified data platform, helping build scalable data pipelines.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

Recruitment Manager

Hand Phone: +65 92333815

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

• Manage Standardized Work Chart (SWC), subcontractors, and site staff to ensure on-time project completion and update clients, consultants, subcontractors, and stakeholders on project progress.
• Prepare method statements, identify drawing discrepancies, submit material and sample submissions, and provide technical advice to resolve M&E-related issues
• Inspect work to ensure compliance with contract specifications, codes of practice, and safety regulations, while coordinating with SWC on structural and civil work matter
• Conduct inspections with RTO/RE based on specifications and approved drawings.

Requirements:

• Diploma/Degree in Electrical/Mechanical Engineering or equivalent
• At least 5 years of experience including involvement in two MRT/LTA underground project
• Proficient in leading CSD/SEM coordination, design interface, and construction coordination for transit projects, including chairing and leading coordination meetings
• Strong experience in BIM software and AutoCAD.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Review and approve shop drawings for RC and temporary works (e.g., struts, walers), and collaborate with consultants, the construction team, and authorities.
• In charge of structural design of temporary works, including scaffolding, falsework, and formwork.
• Take the lead or assist the project department in addressing design-related issues, while managing and resolving production, quality, design, engineering, and scheduling challenges.

Requirements:

• Degree in Civil Engineering or equivalent.
• At least 7 years of infrastructure project experience in structural design.
• Proficient in STADD, AutoCAD, and Microstation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Working Days: 5.5days
• Working Timing: Mon to Fri 8:30am to 5:30pm & Sat 8:30sm to 12:30pm
• Working Location: Woodlands Industrial / Site Office
• Salary: $3,000 to $5,000 depending on experience

Requirements:

• Candidate must possess at least a Diploma, Advanced/ Higher/ Graduate Diploma or Degree in Mechanical, Electrical Engineering
• Experience in chiller system

Responsibilities:

• Knowledge of M&E project requirements and contract requirements
• Able to manage projects/ claims/ sub-contracts
• To able to work odd hours (if necessary)

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Process Engineering Specialists is an international services company providing Project Management, Construction Management, Commissioning, Qualification & Validation, Automation and services to our clients in the pharmaceutical and biopharmaceutical sectors.

We are currently looking to hire Senior Process Project Engineer who will bring their dynamic expertise and drive our client’s project to completion.

What we’re looking for:

• Generation User Requirement Specification (URS) for assigned systems.
• Reviews and approves Basis of Design (BOD) and detail design of assigned systems i.e. PFDs, P&IDs etc.
• Ensures procurement packages (bill of materials (BOM), datasheets, cutsheets etc) meet client equipment specifications.
• Tracks HAZOP action items and ensures action items are incorporated into system design.
• Attends 30%, 60% and 90% model reviews ensuring systems meet operational, safety and ergonomic requirements.
• Reviews and approves system lifecycle documentation (FS. SDS, IO lists, etc) and ensures they meet client requirements.
• Attends factory acceptance test (FAT) of associated equipment if required.
• Attends automation software bench FAT if required.
• Supervises and executes Site Acceptance Testing (SAT) and commissioning activities.
• Generates FAT, SAT and commissioning protocols for assigned equipment and ensures protocols meet client specifications.
• Ensures Vendor Document Requirements (VDR) meet client requirements.
• Builds Preventative Maintenance (PM) tasks and spare parts lists on client Computerised Maintenance Management System (CMMS)

We're currently looking for candidates in Singapore who is willing to relocate to Ireland on a long-term basis.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

• Experience in Active Directory/ Entra AD required.
• Monitor and maintain Windows and Linux servers to ensure optimal performance and uptime.
• Assist in troubleshooting and resolving system-related issues for both platforms.
• Perform routine maintenance tasks, including updates, patches, and backups.
• Manage user accounts and access permissions across Windows and Linux environments.
• Support system deployments, configurations, and software installations.
• Document system configurations, processes, and procedures for future reference.
• Assist with system monitoring and generate performance reports.
• Collaborate with senior team members to implement security measures and best practices.
• Participate in disaster recovery and business continuity planning activities.
• Provide technical support to end-users and escalate issues as needed.

Requirement

• Minimum bachelors degree holder
• Hands on Entra AD experience
• Minimum 5 years of experience in server administration
• Hands on experience in administering Windows & Linux Servers.
• Good to have experience in VMWare, Nutanix.
• Able to multi task