Roles & Responsibilities

Degree in civil or mechanical engineering, expeienece in micro piling works, ground improvement works, jet grouting works, soil nailing, able to work day and night shift, taking care of site safety and prepare risk assesment (RA) based on job requirments. Assisting quanitity surveyour for tender and monthly progress claims.

Selected Candidates to carry out, or supervise, inspections, maintenance, testing and checks according to the rules and procedures in order to release the aircraft to service.

Key Responsibilities

• Inspections

To carry out or supervise technical handling of an aircraft, within the scheduled ground time, according current carriers instructions

Activities:

1. Performs the checklist according to the aircraft type and carriers instructions
2. Inspects the performed duties
3. Signs the required logbook ( e.g. AML/CML + BOW) for maintenance release

• Analying defects and complaints

Activities:

1. Checks pre-arrival information on aircraft status, from crew and/or Maintenance Control Center
2. Contact flight crew directly after arrival for debriefing
3. Checks logbooks for open items
4. Analyses defects and complaints (trouble shooting)
5. Decides if defects and complaints can be deferred or rectified immediately
6. Informs and consults home base and Maintenance Manager or duty Engineer/Service Manager/Operations/Crew upon actions to be taken

• Repair, technical handling and modifications

To carry out or supervise maintenance and repairs of the aircraft

Activities:

1. Ensures availability of work instructions (checklist)
2. Ensures correct and adequate stock control (spare parts and materials) and maintenance of ground equipment (if applicable), in accordance with company procedures
3. Plans and organises the repair process and deploys Mechanics
4. Performs or supervises repairs and technical handling
5. Communicates with home base and Service Manager/Operations/Crew about the progress of the repair or the modification process.
6. Inspects the repairs and modifications
7. Perform flight duties or relief duties to other station when required

• Administration

Activities:

1. Performs all administration related to the technical handling of the carrier, according to instructions by the carrier
2. Updates Station Information File
3. Carry out station related tasks assigned by Maintenance Manager.

• Supervision of Mechanics

Activities:

1. Checks if duties are performed under safe conditions
2. Trains Mechanics

• Knowledge and Experience

1. Is holding of EASA B1 or B1/2 AML
2. Is certifying staff according to EASA 66 Cat. B1 or B1/2
3. Possess either or multiple ratings of A320,A330,A350,B777,B744,B787
4. Preferably has at least 2 years of experience as a certifying engineer
5. Reads, writes and speaks English
6. Has sufficient knowledge about specific operator- and type- procedures including customer demands
7. Has the proven ability to quickly and accurately identify more complex issues and problems that require thorough analysis
8. Is able to envisage the broader consequences of various decisions
9. Is able to arrive at a sound judgement in the face of conflicting facts and ambiguous information

• Behavioural Competencies

1. Concern for Excellence
2. Customer Service Orientation
3. Drive
4. Integrity
5. Judgement
6. Self Confidence

Electrical engineers design, develop, test, and oversee the manufacturing of electrical equipment and systems. They also manage projects, ensure safety standards are met, and collaborate with other engineers and technicians. Some of their responsibilities include:

• Designing systemsElectrical engineers design electrical systems for a variety of applications, including automobiles, aircraft, and power generation equipment. They also design and draft construction drawings.
• Managing projectsElectrical engineers manage engineering projects, including timelines, resources, and teams. They also track work progress to ensure projects are delivered on time and meet specifications.
• Ensuring safetyElectrical engineers ensure that installations and applications meet safety standards and are in line with customer needs. They also carry out work in accordance with safety procedures.
• CollaboratingElectrical engineers often collaborate with teams from other departments, so they need to be able to communicate complex ideas clearly.
• Analyzing performanceElectrical engineers perform quality and performance analysis on new and legacy systems. They also summarize data and report on test results.
• Preparing budgetsElectrical engineers examine the needs of new equipment, calculate costs, and help prepare budgets.

Electrical engineers should have strong organizational and communication skills, as well as problem-solving abilities, attention to detail, and a deep knowledge of electrical engineering codes and safety standards.

Joining Arup

Arup’s purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.

The structural Engineer is required to undertake structural design for major projects and produce drawings and reports in line with structural specifications. This role will be involved in small and medium sized projects, as well as being a key member of larger projects groups that includes design, technical documentation, cost estimates, tender submissions, project scheduling and meeting deadlines and budget.

The Opportunity

• Provide hands on structural design for a range of projects and structural design calculations.
• Prepare and review of drawings submitted.
• Participate in BIM coordination to assist in the implementation of the project BIM execution pla
• Work with structural technicians to produce Revit Models and coordination works with engineers of other discipline.
• Produce project related correspondence and reports

At Arup, you belong to an extraordinary collective – in which we encourage individuality to thrive. Our strength comes from how we respect, share and connect our diverse experiences, perspectives and ideas.

You will have the opportunity do socially useful work that has meaning – to Arup, to your career, to our members and to the clients and communities we serve.

Is this role right for you?

• Degree in Civil Engineer with at least 3 years of relevant experience in Structural Engineering in Building projects
• Proven Track record of a diverse range projects such as in low and high rise PPVC, Pre-stressed and Timber structures
• Proficient or have experience in Revit, Rhino/Grasshopper and Programming skills
• Good written and verbal communication, literacy, and numeracy skills
• Able to demonstrate strong design ability and engineering skills and knowledge

What we offer you

At Arup, we care about each member’s success, so we can grow together.

Guided by our values, we provide an attractive total reward package that recognizes the contribution of each of our members to our shared success. As well as competitive, fair, and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do.

We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling eligible members to share in the results of our collective efforts.

Please see a list of Arup’s Singapore benefits below:

• Hybrid working policy & flexible working hours
• 13th month bonus
• Birthday leave
• Paid parental leave for birth mothers 16 weeks & new parents (excluding birth mothers) 4 weeks
• Purchase Additional leave of up to 20 days (permanent employees)
• Paid Annual subscription to relevant Professional association.
• Reimbursement of Professional Engineers application and examination Fees
• International mobility opportunities
• QP allowance
• Site Allowance
• Work related travel insurance
• Dental expense cover
• Marriage leave (3 days)
• Examination leave (2 days)
• Family care leave
• Bike Loans of up to SGD2000

Different people, shared values

Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We are an open environment that embraces diverse experiences, perspectives, and ideas – this drives our excellence.

Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Arup provide an environment where you will make a positive difference. Discover more about life at Arup at www.arup.com/careers/your-life-at-arup.

We are committed to making our recruitment process and workplaces accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you.

Our Application Process

Please apply directly through our applicant tracking system. Shortlisted candidates will be contacted by Talent Acquisition to discuss next steps. Stay safe online – Arup will never ask for your bank details as part of our recruitment process.

Arup does not accept unsolicited resumes from recruiters or employment agencies.

S. A E & C (S) PTE LTD

Site Engineer

Salary range – S$3,500.00 to S$5,500.00

Job Description – Site Engineer (Civil / Architectural)

Responsibilities

- Project site management mainly related to RC / Steel Structure / Metal / Architectural works

- Manage and handle on-site technical matters

- To prepare site related forms like Method Statement, Risk Assessment, Safe Work Procedures, etc

- Coordination with personnel from both main-contractors and sub-contractors

- Coordination with Professional Engineers

- Coordination with relevant Government agencies like LTA, SMRT, SCDF, etc

- Ensure project is executed in accordance with the construction standards and specifications

- Ensure project is on schedule and within budget

- To do on-site measurements and tally the measurements to drawings

- To prepare / amend / study shop-drawings and give comments

- To make sure all site staff attend the Tool Box Meetings (TBM)

- Any other ad hoc duties assigned by the Senior Management

Requirements

- Minimum Diploma / Degree in Civil Engineering or similar course

- Has at least 5 years of experience in Singapore in the related field

- Has experience working for LTA projects / high-rise buildings

- Familiar with Microsoft Office (Word & Excel in particular)

- Must have good interpersonal / social skills to explain, communicate, liaise, negotiate with the Senior Management, own construction team, and main-contractors and/or subcontractors

Expectations

- Have good work ethics and shows camaraderie with other employees

- Have good presentation skills when meeting clients

- Is self-motivated and willing to learn

- Able to perform in challenging environment

- Values respect, responsibility and humility

Interested candidates who meet the qualifications and requirements may email their resumes.

Only short-listed candidates will be notified

Job Description

· Monitor the daily progress of activities and prepare weekly report of the status of each assignment.

· Ensure timely submission of all documents for client review and approval.

· Coordinates with all projects related personnel on day-to-day progress of work activities, procurement & operations to ensure timely completion of the project.

· Provides full support as required by the management.

· Evaluate, organized, and prioritize workload within a schedule.

· Resolve engineering issues at site by coordinating with the respective departments to implement solutions.

· Report necessary documents for additional works.

Requirements

· Degree in Engineering or equivalent.

· Familiar in AutoCAD.

· Good technical knowledge.

· Ability to multi-task and work under pressure.

· Min 2 years related experience.

Mechanical Engineer

Role Overview:
We are seeking a skilled and motivated Mechanical Engineer to join our R&D team. In this role, you will design, develop, and test mechanical components for a variety of products. You will collaborate with cross-

Key Responsibilities:

• Design and develop mechanical systems, components, and assemblies for various products
• Create detailed 3D models, technical drawings, and prototypes using CAD software.
• Conduct material selection, stress analysis, and thermal analysis to ensure design integrity and performance.
• Work closely with cross-functional teams to integrate mechanical designs with electrical, software, and user-interface systems.
• Perform testing and validation of mechanical prototypes to ensure they meet performance, safety, and regulatory standards.
• Troubleshoot and resolve design, performance, or manufacturing issues.
• Conduct design reviews, ensuring compliance with product specifications, quality standards, and cost objectives.
• Develop and maintain product documentation, including technical reports, assembly instructions, and testing protocols.
• Stay current with industry trends and technological advancements to continuously improve design processes and product quality.

Qualifications & Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field.
• Proven experience (2+ years) in mechanical design
• Proficiency in CAD software (SolidWorks, AutoCAD, CATIA, etc.) and other design tools.
• Solid understanding of material properties, manufacturing processes, and mechanical testing methods.
• Strong problem-solving skills and the ability to apply engineering principles to complex challenges.
• Well versed at TCP/IP, USB, BLE, Modem, Wi-Fi and Serial communications
• Collaborate with Hardware team in the product development process for cameras and Networking, Wireless and IOT products.
• Excellent communication skills, both written and verbal, to interact with cross-functional teams and stakeholders.
• Ability to work independently and in a team environment, managing multiple projects and deadlines.

Preferred Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field.
• Experience in product development and life cycle management.
• Collaborate with Hardware team in the product development process for cameras and Networking, Wireless and IOT products.

Roles & Responsibilities

Job Description:

• To assist the Project Engineer for the execution of contracts progress.
• To co-ordinate with clients, consultants, subcontractors to ensure timely delivery of work schedule.
• To monitor and carry out quality check on progressive completed work and make recommendation for effective project management.
• To assist in the preparation, checking and submission of shop drawings.
• To assist Project Engineer on all other project administrative matters.

Job Requirements:

• Possess at least Diploma / Degree in Electrical Engineering or equivalent.
• Preferable with minimum 2 years of working experience in M&E or construction industry.
• Possess relevant safety certificates is an advantage.
• Ability to work independently and under pressure to meet tight project schedules.
• Willing to travel & based at the project site.

Responsibilities

• Engage maintenance activities for our peripheral digital equipment at client place.
• Repair peripheral digital equipment if there is problem after performing diagnostic tasks.
• Compile data from maintenance/repair work and analyse those data for further improvement.
• Communicate with client in the ground level and understand what kind of issue client is facing.
• Involve in project for installation of equipment at client place.
• Any other ad-hoc duties assigned.

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Job Title: Project Engineer

Location: Singapore

Start Date: December 2024

Duration: 1-year

NES Fircroft has partnered with our client, a leading Oil & Gas company dedicated to innovation and providing comprehensive industrial solutions, to seek a Project Engineer to join the team.

Main Duties:

● Supervise & Coordinate project’s day to day activities including installation and coordination with consultants, main contractors and subcontractors.

● Follow up project schedule by monitoring project progress; coordinating activities; resolving problems on time to ensure the project progress on time.

● Determines project schedule by studying project plans and specifications; calculating time requirements; sequencing project elements.

● Guide, provide inputs and comments, for the drafter to prepare installation plan drawings, detailed drawings for mechanical parts like piping layout, piping isometric drawing, pipe supports, process and mechanical plan drawings.

● Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.

● Check, confirm all safety documents and issue work permits to contractors in collaboration with site safety officers, work permit requirements will be trained by ALSg.

● Assist project manager or procurement in charge in preparation of tender documentation, procurement specification and Bill of quantity.

● Attend the weekly and monthly project meetings to update the status and activity of the project.

● Prepares weekly or monthly project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.

● Manage and coordinate vendors and suppliers during commissioning and testing of the equipment and systems.

● Maintains site safe condition and clean working environment by enforcing internal procedures, rules, and regulations.

● Maintains product and company reputation by complying with state and company policy and regulations.

● Contributes to project team effort by accomplishing related results as needed.

● Assist Project Manager in the preparation of project Capex, budget estimation and cost allocation.

● Able to work independently and less supervision required.

● Willing to work late or during weekends when required.

● Conduct Toolbox meetings with safety officers onsite and maintain records.

● Procurement and sourcing of equipment and materials.

● With sound knowledge of process piping installation and equipment installation.

● Able to work with drafters to produce Piping drawings, installation drawings, details design.

● Apply General PTW, PTP, SIPP from Main Contractor / Customer.

SKILLS & EXPERIENCE

Qualifications:

● Graduate of Bachelor's degree in Mechanical or equivalent engineering education.

● Physically fit to work at a construction site as project engineer.

Experience:

● More than 5 yrs experience working on site installation coordination and project supervision.

● Experience working at process/equipment construction site, plant installation, EPC, or equivalent.

● With experience in giving inputs in technical design and technical document preparation.

● With experience in piping installation, Equipment installation, pipe routing.

Skills:

● Ability to read, understand & demonstrate the P&ID and PFD drawings to site work.

● Proficient to read and understand engineering plan drawings like piping and pipe support plan, equipment layout mechanical installation plan.

● Able to understand Fire Fighting and Alarm systems.

● Proficient with Microsoft office application and Microsoft project or equivalent and familiar with Google doc

● Familiar with Singapore and international codes /Regulations related piping, construction

PERFORMANCE GOALS

● on time project completion

● Assist Project Manager to meet on time preparation of Capex and accuracy.

● Deliver high quality installation

● Contributes to project cost saving and efficiency.

● Contributes to safety to meet Zero (0) Major incidents and time lost.

An established Civil & Structural Engineering Consulting firm in Singapore requires the following:

Resident Engineer

Responsibilities:

• To assist QP (Supervision) on the site supervision and coordination works.
• To attend site meetings and resolve site technical issues.
• To review contractor’s submission.

Requirements:

• Registered with IES as Resident Engineer (RE) in Singapore.
• Preferably with 2 years relevant site experience and preferably in bridge structures and/ or road works.
• Able to work independently as well as in a team.

Interested applicants, please write-in with detailed resume, stating personal particulars, current & expected salaries, availability and experiences to [email protected]

Job Summary:

At Hilton Garden Inn Singapore, Serangoon, as a Duty Engineer, you will be responsible for ensuring the smooth operation and maintenance of hotel facilities, systems, and equipment. Provide technical support and assistance to maintain high standards of guest satisfaction and safety.

Key Responsibilities:

• Perform routine inspections and maintenance tasks on hotel systems, equipment, and facilities.
• Conduct repairs and troubleshooting on electrical, plumbing, HVAC, and mechanical systems.
• Ensure prompt resolution of maintenance requests and work orders.
• Ensure compliance with hotel safety and security policies and procedures.
• Conduct regular safety inspections and report hazards or potential risks.
• Participate in emergency response procedures.
• Provide prompt and courteous assistance to guests with maintenance-related concerns.
• Ensure guest rooms and public areas are well-maintained and functional.
• Work closely with Housekeeping, Front Desk, and other departments to ensure seamless operations.
• Communicate maintenance schedules and updates to relevant teams.
• Maintain accurate records of maintenance activities, repairs, and inspections.
• Update and review maintenance schedules and procedures.
• Adhere to Hilton standards, regulations, and industry best practices.
• Ensure compliance with environmental and sustainability policies.

Requirements:

• Higher/Nitec in Electrical/Mechanical Engineering or related field.
• 2 years of experience in maintenance or engineering role, preferably in hospitality.
• Strong technical knowledge of electrical, plumbing, HVAC, and mechanical systems.
• Excellent problem-solving and communication skills.
• Ability to work independently and as part of a team.
• Flexibility to work rotating shifts, including nights, weekends, and public holidays

Wintel Engineer JD

· Administration and troubleshooting of Windows Servers (Preferably Windows 2008 R2, Windows 2012, Windows server 2003).

· Able to Install of windows servers and has good troubleshooting skills for Wintel systems, knowledge in hardening and securing of Wintel systems.

· Advanced level of Administration of Windows server with active directory, DNS, DHCP and High Availability.

· Understanding of RAID, pros and cons of various RAID levels and decision making on the same in a given situation

· Microsoft cluster configuration, administration and troubleshooting.

· Working experience with various storages, precisely for cluster configurations is good to have.

· Working knowledge in SAN environment and storage space management from systems side is good to have.

· File system and quota management.

· Experience and knowledge on FTP and SFTP Client and Server Model.

· Experience and knowledge with installing and implementing VMware ESX server, VMware virtual Center, setting up V-Motion, HA, DRS, and related VMware products such as VM Workstation, VMware converter VM Backup products and other products for virtualization would be advantages.

· Understanding about the ITIL process

· 3+ Years of System Administration Experience is must.

· Must be a Graduate in Engineering / Science / Diploma in Computers

· Preferably with any two of the given certifications - MCSE / VMWare Certification

· Must have good communication & Interpersonal Skills

· Must be customer-focused

· Good problem-solving skills

- Minimum 6-9 years experience in software application design, development and Implementation – Must

- Atleast 6 years experience in Web application development using JavaScript, HTML, CSS -- Must

- 5+yrs experience in Front-End Development using AngularJS & React JS (mandatory) and Java (preferable)

- The ideal candidate will be responsible for designing and developing user interfaces, ensuring responsiveness and high performance.

- Experience in building scalable web applications and collaborating with back-end developers to integrate APIs is essential.

- Strong problem-solving skills and attention to detail are a must.

Job Description:

• Candidate should have Diploma/Bachelors Degree.
• 3-6 months expereince in Cloud Technologies (AWS/AZURE).
• Microsoft Certified Azure cloud professionals & AWS Certified Solutions Architect (MUST)
• Experience in infrastructure administration/management
• Experience in middle IT management.
• Strong understanding of cloud computing concepts, such as virtualization, scalability, and elasticity. Familiar with specific cloud platforms, such as AWS and Azure

• Create detailed designs and layouts for steel structures using CAD software (e.g., AutoCAD, Tekla, SolidWorks)
• Develop accurate structural drawings, including framing plans, connection details, and assembly drawings.
• Perform design calculations to ensure structural integrity, load-bearing capacity, and compliance with codes.
• Strong knowledge of steel structure design principles and software (e.g., STAAD.Pro, Tekla, SAP2000).
• Familiarity with construction materials, fabrication processes, and assembly techniques.

1. JOB DESCRIPTION

Job Title

Mechanical Project Engineer

Occupation

Engineer

Job Description & Requirements

Responsibilities:

• Site coordination of equipment assembly and troubleshooting.

• Follow up site technical issues.

• Coordinate and plan supply of materials to site.

Requirements:

• Degree from polytechnic with mechanical, electrical or related study.

• Min. 1 year of relevant working experience in plant or construction machinery.

• Excellent proficiency in Mandarin and English.

• Able to use Autocad or other CAD Softwares.

• Good knowledge of MS Excel and MS Word.

• Has class 3 driving license.

• Hands on and self-motivated to work.

• Advantage if having site experience.

• Position: Production Packer
• Working hours: Monday to Friday 8am-5.45pm
• Meal Break: 45 mins
• Tea Break: 15mins
• Salary : $1,600 + Allowances + OT
• Gross : $$2000-$2300
• Location : Woodlands Terrace
• Company transport provided at various area (Yishun, Admiralty, Woodlands, Marsiling, Lakeside)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description:

• Responsible for daily manufacturing operations
• To received Finished Products from production
• Picking, packing plastic audio buttons & panels

Benefits:

· Basic salary up to $3600

· Good career progression

· AWS + VB

Job Scope:

· Report to Sales Manager and attend meetings to address delivery and production matters

· Achieve monthly and yearly sales targets and manage new customer accounts

· Coordinate daily production plans and logistics schedules for smooth operations

· Collaborate with departments (sales, inventory, production) to ensure timely delivery

· Prepare and review sales forecasts, performance reports, and KPIs

· Build and maintain relationships with customers, addressing issues and providing solutions

· Handle customer inquiries and manage inventory, including aging and excess stock

Job Requirements:

· Possess a diploma in Mechanical/Electrical Engineering or related field

· At least 2 years of related working experience

· Competent in understanding technical writing

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Tan Pei Xuan (R24124430)

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description & Requirements

• Red Hat Enterprise Linux (RHEL) and Windows Administration

• Professional understanding of networking related to RHEL and Windows

• Professional understanding of SAN Storage related to RHEL and Windows

• AWS Certified Solution Architect will be an advantage

• Good understanding of large Data Center Facilities operation

• Hands-On experience supporting various Infrastructure agents like NetBackup

• (Mid-Level) vSphere 7.x.

• Cross-team collaboration with storage, network, security and application delivery

• Technical leadership quality to handle technical challenge and sensitive situations

• Integrate the server automation process either by custom scripts or via third-party solutions(Ansible)

• Candidate should have the drive and intellectual horsepower to resolve user issues and support them through telephone, email, or via chat services as applicable

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create software solutions for automated Computer Vision Equipment.
• Develop software for GUIs, manage large datasets, and implement multi-threaded programming.
• Design and implement Image Processing and Computer Vision Algorithms, contributing to the Software Development Life Cycle.

Requirements

• Skilled in Visual Studio programming and proficient in C++.
• Expertise in vision inspection, computer vision, and image processing.
• Familiarity with C# and experience in Deep Learning for Defect Classification are advantageous

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568