Responsibilities:

• Perform review/gap analysis on customer’s specifications for chemical processes, with adequate process control measures.

• To conduct quarterly internal audits to ensure process compliance according to plating specifications

• Actively involve in new process setup, buy-off and qualification program

• Involve in quality issues investigations, troubleshooting, root cause analysis and corrective action implementation

• Translate customers’ specifications to Work Instructions/SOPs

• Responsible for the maintenance of the Quality Management System (QMS) of the company.

• Perform internal audits to ensure process, product and system are complied with requirements.

• Aggressive to trigger process improvement in terms of better quality, more stable process, improve productivity, reduce cycle time etc.

• Provide training to the operators, inspectors and executive staff continuously to achieve team or Company’s objective.

Job Requirement:

• Candidate must possess at least Diploma or degree in chemical engineering or equivalent.

• At least 1 Year(s) of working experience in the related field is required for this position.

• Demonstrated ability to work in a team environment

• Ability to communicate effectively with co-workers, both orally and with written correspondence

Responsibilities:

Technical Support

• Provide day-to-day technical guidance and support to the 3rd party manufacturer, addressing any mechanical engineering-related issues that may arise during production.

Quality Operation

• Collaborate with the manufacturer to establish and maintain strict quality control standards, ensuring the consistency and reliability of our products.

Process Optimization

• Identify opportunities for process improvements and efficiency enhancements within the manufacturing workflow.

Problem Solving

• Analyze and resolve mechanical engineering challenges, preventing or minimizing production delays and defects.

Product Improvement

• Work closely with the design and development teams to implement design changes and improvements that enhance product quality and manufacturability.

Investment audit & asset management support

• Coordinate investment audit in close collaboration with other functions and conduct periodic physical asset inspection. Support annual inventory check if needed.

Requirements:

• Bachelor's degree in Mechanical / Electrical Engineer or a related field, Master's Degree of Mechanical Engineering is plus
• Min. 5 years in EMS (Electronic device assembly) with excellent understanding of overall supply chain, manufacturing technology, process set-up, process validation and SOP support.
• Open to travel once a week to nearby country (Can be a day trip or overnight trip)
• Prior experience in SMALL DEVICES such as earpods/ smart watch/ from electronic devices ( wearable electronic devices )
• R&D and Manufacturing Production Supervision Experience

All qualified applicants, please send in your resume NOW to:
Whatsapp: https://wa.me/+6597430026
Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Job Description:

• Oversee post-sales activities Cybersecurity products.
• Participate in large-scale project implementations at both local and regional levels.
• Provide on-site implementation services, including testing, deployment, and documentation.
• Offer technical support to ensure customer satisfaction.
• Analyze and address customer queries by troubleshooting and consulting existing knowledgebase articles and known issues.
• Be available for 24x7 maintenance support calls on a routine standby basis.
• Any other ad hoc duties as assigned by supervisor.

Requirements:

• Candidates with no prior relevant experience are also encouraged to apply
• Bachelor’s Degree or Diploma in Cyber Security, Computer Science, Computer Engineering, or a related field.
• 1-3 years of relevant experience in IT, particularly in network support and administration.
• Knowledge and experience in networking, including routing and switching technologies.
• Capable of working independently as well as part of a team.
• Willing to work diligently and eager to learn about new technologies.
• Strong analytical and troubleshooting abilities.

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Salary: Up $3300+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience required
• Able to write simple report

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Our Client is in the Oil and Gas. Due to their current expansion plan, they are looking for an Facilities Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibility

• Plan and coordinate infrastructure and equipment maintenance activities.
• Address work orders and manage maintenance schedules.
• Investigate and report breakdowns, identifying root causes and solutions.
• Review maintenance programs and suggest improvements.
• Identify inefficiencies in equipment and propose upgrades.
• Evaluate systems to enhance operational efficiency.
• Monitor infrastructure and asset life, implementing long-term maintenance plans.
• Prepare purchasing documents for parts and service contracts (e.g., cleaning, landscaping, pest control).
• Develop the Facility Asset Management Plan (AMP).
• Oversee facility expansions, systems upgrades, and quality control.
• Manage contractors, ensuring they meet company requirements.
• Ensure compliance with regulations and safety standards.
• Prepare technical reports and compliance documents.

Requirement

• Min Degree in engineering
• Min 3 years’ experience in Facility Engineering in Oil & Gas, chemical or Plant environment
• Good if have civil engineering back ground
• Knowledge in Building regulatory and engineering
• Experience in MS Office, SAP

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

JOB RESPONSIBILITIES

• Design plastics or injection-mold fabrication processes.

• Create and improve injection-mold machinery.

• Analyze manufacturing data and suggest improvements.

• Analyze production and machinery line.

• Ensure quality output of membrane extrusion.

• Develop and design engineered plastic parts, insert molded parts and assemblies.

• Interact with internal customers, suppliers, and internal resources.

• Establish the parameters for an optimal molding environment.

• Design necessary components.

• Ensure environment to make plastics is appropriate.

• Analyze quality control and correct flaws.

• Work with other team members and vendors.

• Review existing validation reports.

• Create new reports and verifications.

• Analyze moldflow, part advisor analysis, finite element analysis, and stress/fatigue analysis on plastics.

• Design hot/cold runner molds.

• Develop 3D solid mold designs.

• Create water diagrams and hot runner wiring schematics.

• Prepare mold-filling simulations.

• Work with SQE to approve new supplier for molded parts, optimize the process at supplier’s manufacturing process

Requirements:

• Bachelor’s degree in Plastics Engineering or a related field with at least 2 to 3 years experience.
• Degree in business or equivalent
• Proficiency in Microsoft Word and Excel
• Experienced in Construction field will be an advantage

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669

1. Laboratory duties

• Understanding of the experiment requirement and objectives.
• Preparation of laboratory equipment, apparatus, hardware, software for lab classes.
• Housekeep the laboratory after each laboratory session.
• Support the Lecturer for the laboratory sessions/workshops.
• Arrange and provide lab familiarization sessions for new lecturers on experiments.

2. Responsible for laboratory inventory and procurement of laboratory materials and equipment

• Assist in the keeping of records and regular report to the reporting officer.
• To provide & maintain proper bookkeeping on lab matters such as feedback, problem tracking and follow-up actions.
• Obtain quotations and discuss requirements with the reporting officer.
• Provide technical assistance and support to students in their projects.

3. Equipment maintenance (Hardware/Software)

• Ensuring required software are properly installed and running before class commencements.
• Provide servicing, maintenance, troubleshooting & minor repair of laboratory equipment.
• Assisting in managing of software licenses, installations or updating, setup, and maintenance of lab computers and software.
• Liaising with vendors on issues log and status.

4. Workplace Safety & Health

• Deliver WSH and Risk Assessment Talks to students
• Ensuring lab safety at all times and all users (e.g. students, lecturers, etc) to comply with the lab rules & regulations.
• Assist in conducting risk assessment for engineering laboratories.
• Taking the role as Occupational First Aider.
• Monitor FYP and workshop activities and collect suggestions for possible improvements.

5. General Matters

• Any ad hoc duties as assigned by Reporting Officer

Requirements

• Diploma in Engineering discipline(Electrical/Mechanical/Mechatronics) with at least 1 year of experience
• Familiar and able to operate laboratory equipment, software & perform troubleshooting if required.
• In-depth domain knowledge which includes the understanding of lab objectives, applied principles and lab safety requirements
• Knowledge of laboratory safety requirements
• Able and willing to share knowledge with others
• A good team player
• Able and willing to share knowledge with others
• A good team player

More details (Willing to work on rotational shift duties):

• 5 Days work week
• Weekdays Shift: 8.30am to 5.30pm /1pm to 10pm
• Sat duty (once a month)

1. No class/lab - 8.30 am to 5.30 pm
2. With class/lab - 9 am to 6 pm

Responsibilities:

• Review of project orders relevant specification and/or data sheets
• Providing and implementing cost effective and best engineering solutions for project
• Support sales, project and production team on various aspects of technical/engineering matters
• Prepare engineering documents, i.e. Assembly drawing with BOM, control schematic drawing, test procedure, data sheet and engineering library
• Manage engineering change function and ensure engineering documents are updated
• Providing engineering practice and calculation to meet project timeline
• Field support for the customers to resolve after sales / any technical issues
• Travel along with Technicians to installation base and sites if situation arises
• Administer and to maintain the SAP item master data
• Drive the department’s improvement programs and/or process efficiency initiatives

Requirements:

• Diploma/Degree in Mechanical/Instrumentation or equivalent
• At least 1-2 years experience in Marine, Oil & Gas or Automation industry
• Possess knowledge in instrumentation and control system
• Knowledge in industrial standards related to Valve Automation
• Able to read and interpret Drawings, Specifications and Technical documents
• Knowledge of AutoCAD 2D/3D or drafting software & SAP will be added advantage

Interested applicants, send in your updated resume by clicking “Apply Now”.

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Benefits:

• Basic salary up to $4500
• Transport allowance $1200
• KPI Bonus (Ave 2 months)
• Variable Bonus (Ave 2 months)

Responsibilities:

• Offer technical and engineering assistance for medical equipment, including on-site maintenance servicing.
• Deliver an after-sales maintenance service, calibrate electronic components, and conduct laser alignment procedures.
• Supervise routine repair tasks, troubleshoot issues, and manage installation setups.
• Administer spare part inventory and handle warranty spare part returns.
• Schedule routine servicing and assist in equipment setup for demonstrations and new installations.
• Manage equipment maintenance service contracts and handle administrative documentation.
• Ensure thorough documentation, notification, tracking, and follow-up on all technical matters.
• Prepare and maintain technical service reports accurately.

Requirements:

• Min Diploma in Electrical/Electronic, Mechanical Engineering or equivalent.
• At least 1-3 years of experience in maintenance servicing and troubleshooting skills in similar industry.
• Strong technical problem-solving and troubleshooting skills.
• Able to work independently as well as collaborative with team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Plan, manage, execute and close out construction projects (and/ or maintenance construction works) in a safe, timely and sustainable manner including managing nominated subcontractors & vendors;
• Produce long and short term work plan / schedule for assigned task/projects;
• Conduct site investigations and analyse data (reports, tests and drawings);
• Ensure quality of work produced meeting requirements and ensure all pertinent documentations for the job is in order that includes but not limited to method statement & risk assessment, as-built drawings, EQCC, ITP, FIS (field info sheet) compilation of project documents and project closures
• Follow through with job quotations/ BQs, progress claims and issuance /closure of POs for the jobs
• Ensure work carried out safely and comply to all safety requirements
• Handles and resolve technical issues including liaising with subcontractors, vendors, designer and/or consultants
• Coordinate/ communicate with client and own staff (supervisor & logistics supplies) from planning stage till handing over including claims
• Planning of resources for the project (manpower, equipment & materials)
• Progress monitoring and reporting of project status
• Pre-work preparation, e.g. site visit, schedule, MS/RA etc.
• Setting project target and meeting supervisors regularly to share work plan and resource sharing;
• Regular site visit to identify system/ process deficiency and highlight in timely manner
• Recommendation and implementation of operational improvement possibility (including mechanisation, digitalization and other productivity and cost optimisation improvements)
• Carry out technical and feasibility studies that satisfy technical specifications
• Hand over the resulting structures and services for use including follow-up works related to DLP or warranty periods
• Follow through with incident reporting if there are any incidents to their respective sites
• Purchasing of materials that includes raising of MRF and close out of GRN once material received
• Checking on materials delivered to confirm correct materials ordered & delivered
• Attend monthly HSSE Committee meeting and highlight any pertinent issues
• Attend schedule project/ site meetings (internal & external) and highlight any pertinent issues; including producing meeting minutes
• Resolving any unexpected technical difficulties and other problems that may arise.
• Enhances organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.
• Taking part of tender preparation process including submission of technical submission, project schedule and any other actions required for the tender submissions

Requirements:

• Possess a Degree in Civil Engineering or equivalent recognized by Singapore PE Board.
• Minimum 3-5 years' of relevant site experience work for civil projects.
• Must be technically inclined and possesses excellent problem-solving.
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and construction teams.
• Candidate can start work in short notice is preferred
• Experience in using Microsoft Project/ Primavera or equivalent is preferred

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
• Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

About the Company:
The nature of business of our client is Construction and Civil Engineering company supporting the Oil & Gas and Chemical Processing Industry. They have decades of experience supporting large MNCs operating in Singapore, both on the mainland and offshore islands, in Civil Engineering Construction, and Maintenance projects.

Responsibilities:

• Act as the main QAQC adviser on project site for subcontractors, crafts people, and operatives
• Overseeing quality control and health and safety matters on site
• Review requirements, specifications, and technical design documents to ensure compliance in the inspection test plan (ITP), method statement, and installation
• Create detailed, comprehensive, and well-structured ITP to meet client needs
• Maintain, formulate, and follow through quality assurance system and follow through the audit requirements
• Formulate and implement a quality assurance program for the worksite including but not limited to training, assessment, and implementation to ensure quality works on site
• Estimate, prioritize, plan, and coordinate testing activities
• Liaise with consultant and internal teams to identify process system and site requirements and quality execution
• Day-to-day management of the site, including supervising and monitoring the site supervisory crew, labor force and the work of any subcontractors
• Investigate the causes of non-conforming cases and train users to implement solutions
• Preparing reports as required

Requirements:

• Possess at least a bachelor’s degree related to Civil Engineering and/or QA/QC knowledge
• Prior experience related to civil engineering in Oil and Petrochemical industry is necessary
• Good knowledge of Civil Engineering industries’ quality control/assurance

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

Project Engineers organise, administer and execute the project activities

• Coordinating activities – involve in meeting / liaising with Main Con, Owners & Consultants to arrange on-site works with Personnel. the project/s and ensures smooth transition and completion.
• Planning & Scheduling of Resources and Manpower - ensure schedules and deadlines are met and materials required are properly arranged.
• Budgeting and Control – monitor and always ensure that Budget and Manpower are managed properly
• Control Documentation and Responsiveness – Prepare and submit all necessary documentation from the commencement to completion of projects to all relevant project stakeholders.
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects
• To forecast and anticipate possible issue for projects and to eliminate potential risks
• Site supervision and to liaise with supervisors and workers to ensure smooth work flow
• Planning of manpower and work arrangement with site person in charge
• To liase with suppliers on procurement and delivery of materials and equipment
• Assist in settlement of project final account including variation orders

Requirements:

• Preferably Engineer specialized in Engineering - Civil or Electrical or Mechanical or equivalent.
• At least 1 Years of working experience in the related field is required for this position.
• Energetic, self motivated, good problem solving skills.
• positive attitude.

ASEANet Manpower Consulting Is a boutique search firm and our founder and consultants have years of experience from various industry and businesses background. Our expertise include Executive Search, Permanent Placement , Career Transition and Talent Development.

We connect outstanding people with the best Innovative Companies.

ASEANet Manpower Consulting offer different specialisms including:

Accounting & Finance, Admin & Secretarial, Banking, Construction, Engineering, Events, Education, Financial, F&B , Healthcare & Medical. , Supply Chain & Logistics, Manufacturing, Retail, and Information Technologies. With our professional recruitment service, we can assist

you with your desired career path.

Contact us for a FREE Consultation.

We believe that YOUR SUCCESS - IS OUR MISSION.

Our client are looking for next team members to join their growing team:

Hiring : Security Engineer

Job Responsibilities:

- Responding to intrusion alarm system activation

- Performing maintenance service, commissioning of alarm systems.

- Attending to customer request on alarm and card access systems

- Conducting patrols at night.

- Required to work on 12-hr rotating shift.

Job Requirements:

- At least a Higher Nitec with a high level of energy

- Good interpersonal communication skills

- Valid class 3 license.

- Minimum 1-2 years working experience

- Those who obtained Enhanced Basic Security certification will be an added advantage

- Candidates need to be bilingual in English and Mandarin to liaise with mandarin speaking associate.

Chua Mui Khim

( EA Registration Number : R22104766)

ASEANet Manpower Consulting Pte Ltd

(Co Reg : 202141565E / EA License: 21C0866)

We regret to inform that only shortlisted candidates will be notified

Job Description:

We are seeking a skilled ETL Developer specializing in Talend to design, build, and maintain ETL jobs that facilitate efficient data extraction, transformation, and loading. This role will involve working with diverse data sources including Cloudera, PostgreSQL, and SQL Server, while collaborating with cross-functional teams to ensure data quality and integrity. The ideal candidate will have strong experience in using ETL tools and scripting languages like SQL and Python to clean, validate, and transform data as per business requirements.

Key Responsibilities:

ETL Development:

Design, develop, and maintain ETL jobs using the Talend ETL toolset to extract, transform, and load data from a variety of data sources such as Cloudera, PostgreSQL, and SQL Server.

Create and maintain database tables, including necessary constraints and indexes to meet the project requirements.

Data Transformation & Quality:

Implement data transformation logic using Talend or scripting languages such as SQL and Python to meet target schema and quality standards.

Collaborate with teams to design and execute data quality improvement initiatives.

Clean, validate, and normalize data to ensure accuracy, consistency, and completeness.

Collaboration & Troubleshooting:

Work closely with team members to understand source system structures, data retrieval methods, and organizational tools.

Provide troubleshooting support to ensure data integrity and resolve data processing issues to maintain the efficiency of ETL processes.

Process Improvement:

Participate in ongoing efforts to enhance ETL processes, identifying opportunities for optimization, automation, and improved scalability.

Required Skills & Qualifications:

Technical Expertise:

Proficiency with Talend ETL toolset for building and managing data pipelines.

Strong understanding of databases such as Cloudera, PostgreSQL, and SQL Server.

Advanced SQL skills for querying, transforming, and loading data.

Experience with scripting languages like Python for data transformation.

Data Management:

Experience in designing and developing database tables with appropriate constraints and indexes.

Strong knowledge of data cleansing, validation, and transformation techniques.

Collaboration & Communication:

Ability to work collaboratively with cross-functional teams to understand data sources and business requirements.

Strong problem-solving and troubleshooting skills to ensure data accuracy and process efficiency.

Preferred Qualifications:

· Experience working in a cloud-based environment (e.g., Cloudera, AWS, etc.).

· Familiarity with data quality improvement frameworks and tools.

· Understanding of data warehousing concepts and practices.

Educational & Professional Requirements:

· Bachelor’s degree in Computer Science, Information Systems, Data Analytics, or a related field.

· 3+ years of experience working with ETL tools (Talend) and database technologies.

· Certifications in Talend or related ETL tools are a plus.

Respnsibilities

• Assist in providing technical support for enterprise network environments
• Resolve incidents by troubleshooting system and network problems, diagnosing and resolving hardware/software issues, and analyzing system logs for potential issues.
• Support network projects and Tech-Refresh initiatives
• Participate in on-call rotation for network support
• Perform routine network maintenance tasks
• Assist in monitoring network performance
• Collaborate with team members on service delivery
• Demonstrate problem-solving skills for network issues
• Communicate technical concepts effectively
• Deliver quality network support in a team environment
• Commit to continuous learning of network technologies

Requirements

• Degree/Diploma in IT Networking or equivalent
• Min 2 years of experience in network support or administration
• Good Knowledge of network technologies, OSI model, TCP/IP, LAN/WAN
• Familiarity with WLAN solutions (eg. HPE Aruba)
• Entry-level certifications (e.g., CompTIA Network+, CCNA)
• Ability to configure and maintain network devices under guidance
• Strong analytical and troubleshooting skills
• Good communication and teamwork abilities
• Eagerness to learn and adaptability to new technologies

Roles & Responsibilities

As an Engineer, you will be involved in:

• Studying & understanding the Specifications of Customer requirements / needs
• On-site assessment
• Brainstorming proposals to address customer requirements / needs
• Sourcing / selecting compatible components for the proposed design
• Preparation of estimated budget for the proposed design
• Conduct of Design Review sessions
• Detailed Design
• Detailing of Design with GT&T, Material Selection, Heat Treatment & Finishing
• Preparation of Bill of Material (Fabrication) & (Commercial)
• Preparation of Assembly & Pneumatic Drawings
• Assisting in assembly & troubleshooting of Sub-Modules
• Testing & Troubleshooting of Equipment
• Assist in Buyoff of Equipment
• Preparation of Operation Manual
• Fundamental Project Management

Desired Skill Sets

• Degree in Mechanical or EE Engineering or its equivalent
• Project management skills
• Knowledge in automation design of mechanisms / tools
• Familiar with general bus, related ICs, components and designs
• Knowledge of firmware, electronic, software, mechanical, and testing.
• Knowledge in GT&T, Material, Heat Treatment & Finishing
• Knowledge in Pneumatic
• Knowledge in Drafting & Simulation software (AutoCAD, NanoCAD, Fusion360, SolidWorks, ANSYS)
• Knowledge in Electronics / IoT (will be advantage)
• Knowledge in Programming (C#, C++, Python, PLC) (will be advantage)
• Min. 2 years exp.
• Only Singaporean, Singapore PR, Malaysian, and local graduate bonded for local employment can apply due to MoM regulation.

Screening Questions

• Do you have experience in automation and equipment maintenance?
• Do you have experience in equipment design?
• Are you a fresh graduate?

JOB DESCRIPTIONS

TO DESIGN, INSTALL AND REPAIR MECHANICAL EQUIPMENTS TO MEET CUSTOMERS REQUIREMENT.

REQUIREMENTS

ABLE TO READ AND INTERPRET MECHANICAL DRAWINGS

FAMILIAR WITH THE OPERATION OF HEAVY MACHINERIES LIKE LATHE, BORING AND LASER CLADDING MACHINES

FAMILIAR WITH TIG/MIG OR ROBOTIC WELDING PROCESS

MINIMUM 5 YEARS RELATED EXPERIENCE

IT Engineer

Responsibilities:

• Provide IT and network support including system installation, configuration, upgrading and troubleshooting.
• Manage computer networks and related computing environments on systems software, applications software, hardware, and configurations.
• Provide daily support to user and operation system platform.
• Documentation of all the IT assets, user information, phone lines, data lines and software licenses and maintenance.
• Protect data, software, and hardware by coordinating, planning and implementing network security measure.
• Troubleshoot, diagnose and resolve hardware, software and network problems.
• Managing of IT assets and assists in decision making on acquiring IT assets.
• Setting up all the IT requirements which includes PC, Copier Machines, required software and the applications pertaining to the respective department.
• Email configuration – creating email IDs for the new staffs, taking backup of the outlook files, adding additional email accounts in accordance to internal procedure.
• Monitor server infrastructure and application full data and system backup, load balancing web server, VM server and windows SQL cluster fail over services
• Carry out and deliver change request from operation team to enhance system security and data process tracking system.
• Conduct training related to operation system application, shop floor management system and internal IT Management policy.

Requirements:

• Diploma or Degree in Information Technology or equivalent.
• Possessed at least 2 years of experience in IT hardware maintenance service on server, network and storage preventive.
• Experienced in operation systems and good troubleshooting skills.
• Strong server and storage hardware configuration knowledge will be an advantage.
• Be a quick learner in acquiring new system skills and working with new technologies.

Interested applicants please submit your resume to [email protected]

We are looking to hire a Sales Engineer as our team is expanding into neighbouring regions.

If interested, please submit your application with your requested salary and resume.

Remuneration terms will be commensurate with your competency if hired. Only shortlisted candidates will be contacted.

Priority will be given to candidates that do not require sponsorship to work in Singapore.

----

As Sales Engineer you will be responsible for dealing with a wide customer base in Singapore. Your focus will be to understand customer’s needs and propose solutions to value-add to their project.

You will be the first point of contact for quotations, enquiries and all customer activity. This role would benefit with some engineering background to have the technical expertise in advising customers in their projects.

This role is an excellent opportunity to join a very customer focused niche industry which will offer you a strong career path, to take customer service and up-selling/cross-selling to a new level.

Important qualities:

• Problem solving skills – Ability to assess customer needs and offer tailored solutions. This often requires creative problem-solving and the ability to think on their feet.
• Clear communication skills – Ability to explain complex technical information in a way that is easy for non-technical clients to understand is essential
• Active listening – Understanding the client's needs and concerns to provide relevant solutions.
• Tenacity – Sales process can be long and challenging, so persistence and determination are key.
• Good time management – Sales engineers often juggle multiple clients and projects, so effective time management and the ability to prioritise tasks are important.

Your main responsibilities:

• Actively seek out prospective clients
• Manage existing key accounts
• Participate in technical discussions and commercial negotiations
• Clearly articulate technical capabilities and give product demonstrations
• Co-ordinate with factories on customer enquiries and project tenders

Requirements:

• Preferred to have an Engineering Degree or some form of engineering background
• Sales experience and network in the industry is a plus
• Good communications skills in both spoken and written English are essential
• Self-motivated and dynamic person that is passionate in the role
• Familiar with Outlook, Teams, Business Central and other Microsoft 365 apps

Employee benefits:

• 5 day work week
• Monthly transport (if utilising own car) and mobile allowance
• Basic + commission remuneration scheme
• Medical and dental benefits
• Training and development opportunities
• Medical and annual leave

Duty and Responsibility

- Procurement engineers oversee the purchase of technical equipment for industrial operations.

- They collaborate with designers/Site to determine the equipment needed to complete manufacturing or construction projects according to specifications, research vendors for that equipment, then order it.

- These engineers negotiate purchase agreements with vendors and award contracts to vendors for equipment.

- They also monitor any adjustments to the equipment needed to maintain an optimum supply of equipment to complete projects on time and within budget.

- A procurement engineer must possess high-level organization and record-keeping skills to maintain a consistent flow of equipment to the company’s factories or worksites and ensure vendors are fulfilling the terms of their contracts.

- Influencing and negotiation skills are also crucial for procurement engineers, as it’s up to them to negotiate the purchasing agreements for engineering equipment and hire vendors for projects.

Requirement

At least have 5 years Construction Sector

Experience

Good communication skills to liaise with associates, clients, Supplier, government authorities.

Good team player

• Administration experience of Storage Arrays of multiple vendors like EMC, Hitachi and Netapp
• Administration experience of Different Cloud platforms like AWS and Azure.
• Hitachi midrange and enterprise storage (AMS, HUS, VSP & Gx00 etc)
• Experience on AWS Cloud technologies like EC2, S3, Route53, Cloud Formation, Elastic IPs, VPC, RDS and Cloud Watch.
• Configuring Elastic Load Balancers with EC2 Auto Scaling groups.
• Optimized Volumes and EC2 Instances and created multi AZ VPC Instances
• Good Understanding of AWS Elastic Block storage(EBS), various volume types and Utilization of different types of EBS Volumes based on client requirement.
• Storage performance tuning and troubleshooting.
• Incident management and change management process knowledge.
• Project handling experience from sizing to roll-out, preferably with project management background Strong analytical skill, very initiative, good planning & systematic execution