Roles & responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/Construction Subcontractor, etc. for Detail Design Development

2. Review Structural Analysis and Calculation carried out by design consultant and develop simple structural calculation for temp. works

3. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, Shop drawing development

4. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, and Strutting etc.

5. Check/Rectification of all the structural drawing/ shop drawing if required

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline;

2. Minimum 3 years of experience in Civil and Structural Engineering especially for LTA Project

3. BE well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure

4. Be well-aware of Underground Structure/Construction Sequences and related civil design works

5. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards

* Candidates who has experience as CS Engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Job Responsibilities:

1. Circuit and system design of RF/analog transceiver IC based on CMOS technology

2. Schematic design, behavioral and circuit-level simulation, circuit implementation, layout design and test

Job Requirements:

1. A master's degree or above in microelectronics, communications, electronic engineering and other related majors; more than 3 years of relevant experience

2. Good know-how on RF/analog circuit theory and analysis; Good understanding of design process of RF/analog IC

3. Solid experience in the following module/block design and test: VCO, PLL, LNA, PA, MIXER, PMU, ADC, DAC, etc.

4. Good communication skills and team spirit.

5. Fresh MS graduates are welcome.

Responsibilities:

• Provide 2nd level onsite troubleshooting support in response to escalation from helpdesk to ensure consistently meet customer response / resolution times and objectives based on SLA
• Coordinate with equipment vendors and 3rd part suppliers to resolve issues
• Attend to customer enquiries (through phone and email) and follow-up on outstanding issues closely while ensuring that customers are kept updated on the progress
• Maintain call log database system and ensure all unresolved problems are escalated to the senior engineers
• Participate in adhoc projects when required

Requirements:

• Possess NITEC certification or Diploma in IT or relevant discipline
• Experience in desktop support and good working knowledge in Windows OS, Basic Network experience
• Minimum 2 to 3 years experience in customer support environment will be an added advantage
• Able to work under pressure and independently in a team environment
• Must be able to work in a fast-paced and dynamic environment
• Willing to travel around Singapore to multiple sites
• Able to work on rotating shifts

Primary Objectives of Position

• Manage the overall supervision of maintenance activities in depot and workshop
• Responsible for the availability of passenger trains, engineering train vehicles, light rail vehicles and workshop overhaul or plant equipment for mainline operation.
• Manage the budget expenditure of the section
• Ensure all defects on vehicles/equipment are rectified in a safe and responsive way.
• Provide an effective technical support service to all other Rolling Stock sections, including development and control of an overall maintenance plan, provision of Work Instructions, procedures and technical documentation and provision of regular performance information.
• Ensure that Rolling Stock staff and contractors within their sections are adequately trained and competent to perform their tasks safely and proficiently in the railway environment.
• Overall-in-charge of managing corrective and preventive maintenance of NEL/SPLRT passenger trains, engineering trains, light rail vehicles, or depot plant equipment.
• Overall-in-charge for all engineering projects in NEL/SPLRT Rolling Stock.

Major Responsibilities

• The day-to-day management of staff in their section.
• Ensuring individual roles, functions and responsibilities are clearly defined and communicated.
• Managing section budget resources to maximize maintenance outcomes and improve customer satisfaction.
• Providing advice and support to the HOD and Executive management as required.
• Identifying areas for improvement through training and development programs
• Ensure all staff are adequately trained and competent.
• Manage, lead, and motivate the section to achieve reliability, quality, cost and availability targets to meet customer needs.
• Maintain the performance of all vehicles and depot equipment.
• Perform and standby for company and department duty schedule such as PST, EIC, AEIC or Rerailment duty

The above activities are no means exhaustive and are subjected to amendment whenever is needed

Specific Safety Responsibilities

• Ensure all work related to the section are undertaken in a safe way during all maintenance activities in Sengkang Depot.
• Undertake Monthly Safety Observations of all areas under the purview of Rolling Stock and ensure that controls are in place to achieve safety.

Job Specifications

Minimum Education / Qualifications

• Degree or Diploma in Engineering from a recognized university or polytechnic.

Minimum Years of Relevant Experience

• Preferably with 3 years of relevant experience in Railway Engineering/Maintenance or equivalent

Knowledge/Skills

• Strong Communication, Writing, Analytical and Problem solving skills
• Knowledge of Training and Development, preferably with full ACTA qualification
• Conversant in MS Office software (Word, Excel, PowerPoint)

Attributes

• Highly motivated and resourceful team player
• Strong interpersonal and communication skills
• Strong planning and organization skills
• Analytical and meticulous

COMPANY DESCRIPTION

As the world's leading owner and operator of LPG carriers with five decades of operating experience, BW LPG promotes competitive, sustainable solutions to secure value for society and our stakeholders.

Our global footprint spans seven countries with 17 nationalities represented across our workforce. Our fleet of 39 Very Large Gas Carriers (VLGC) offer a total carrying capacity of over 3 million CBM. From spot voyages and time charters to Contracts of Affreightments (CoAs), our emphasis on flexible, reliable service has earned the trust of leading oil companies as well as trading and utility companies. More information about BW LPG can be found at www.bwlpg.com.

BW LPG is associated with BW Group, a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 490 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW LPG, as a member of the BW Group, is one of Forbes World's Best Employers 2023.

RESPONSIBILITIES

Summary:

The Senior/ Data & Machine Learning Engineer is a hybrid role focusing on developing our modern Lakehouse including pipeline development, and the deployment of machine learning models.

This position combines the responsibilities of a Data Engineer and Machine Learning Engineer, ensuring robust data pipelines and scalable deployment of ML models.

The role involves building data ingestion and transformation processes, deploying machine learning models, and working with DevOps and CI/CD for automated deployments and monitoring.

Collaborating with Business Analysts to ensure business requirements are translated into data solutions.

Working with Data Analysts to deliver accurate and reliable datasets that power impactful analytics and dashboards.

Partnering with other Data Engineers and Analytics teams (e.g., Quantitative Research team) to support advanced analytics and provide datasets for reporting and insights.

They collaborate with System Analysts and the Business to understand the business logic and data lifecycle within our systems and translate this into technical analytical solutions.

Responsibilities

• Design and maintain data pipelines: Design, build, automate, and optimize ETL/ELT pipelines to support data flow, transformation, and availability across the Lakehouse platform.

• Collaborate on data storage and solutions: Partner with analysts to create scalable storage solutions, optimizing data structures for both analytics and ML applications.

• Implement data quality and governance standards: Establish monitoring and enforce data quality checks, ensuring data consistency, reliability, and compliance.

• Optimize and maintain model performance: Continuously monitor deployed models for performance, retraining or adjusting them as needed to ensure sustained accuracy.

• Deploy and monitor machine learning models: Design and implement CI/CD pipelines for model deployment, ensuring efficient and reliable delivery of ML models.

• Mentor junior team members: Guide and foster the professional development of junior data engineers, enabling their contribution to the team and ownership of project deliveries.

Expertise:

• Collaboration and Communication Skills: Excels at working in a team to align data solutions with business needs, focused on creative problem-solving in a fast-paced environment.

• Analytical Thinking & Communication: Strong skills in analyzing and translating data-driven insights and requirements to both technical and non-technical stakeholders.

• Data Pipeline Development Skills: Proficiency in designing and implementing data pipelines to support reliable data ingestion and transformation using Databricks and Spark.

• Data Modeling Expertise: Advanced SQL and Python skills for complex queries and data modeling, enabling efficient data access and transformation.

• Python & Model Deployment Proficiency: Expertise in Python for deploying models and developing APIs for serving predictions.

• Spark & Azure Databricks: Skilled in using Spark on Databricks for processing large-scale datasets and supporting machine learning workflows.

Knowledge of:

• CI/CD Pipeline Creation (incl. for ML Models): Experience in creating CI/CD pipelines, enabling automated testing, validation, and deployment of data pipelines and machine learning models using GitHub and GitHub Actions with Databricks.

• Monitoring & Model Maintenance: Ability to set up monitoring tools for models, track metrics (accuracy, latency), and maintain model performance.

• IaC for Infrastructure Automation: Experience in automating cloud infrastructure management for consistent deployment and scaling using Infrastructure as Code tools like Terraform.

• Power BI Integration: Basic understanding of Power BI for creating visualizations of model performance and metrics for stakeholders.

• Agile Methodologies in Data Engineering: Understanding of agile frameworks to work within iterative sprints and collaborate with cross-functional teams

Experience:

• At least 3 Years in Data Engineering: Proven experience building and maintaining data infrastructure, with a deep understanding of data engineering principles and best practices.

• 1 Year in Machine Learning Engineering: Track record in managing the lifecycle of machine learning models, including deployment, monitoring, and retraining.

• Business & Data Transformation: Experience working in supporting business transformation and process improvement into Data-Driven organizations and systems.

• Agile Mindset and Experience: Thrives in Agile Environments, with a strong resilience, adaptability and responsiveness to change in fast-paced settings.

The position will be based in Singapore.

Only shortlisted candidates will be notified.

Job Title: Digital Infrastructure Engineer (ID1593)
Location: Pioneer, transport pick up Singapore and JB Bukit Indah
Working Hours: Mon to Fri 8:30am – 17:30pm
Salary: $2800 - $3800
Benefit: 12 days Annual Leave, AWS and Variable Bonus

Job Description
• To review the current IT infrastructure and propose improvement plans.
• Plan and implement the work based on company policy and ensure on schedule.
• Support and maintain the MS Windows servers, SAN Storages and CISCO network infrastructure of the whole company.
• To maintain and improve backup of the systems.

Requirement:
• Bachelor’s degree in IT related field or Diploma with at least 4 years of related working experience
• Experience in manufacturing field will be an added advantage
• Good knowledge in configuration of networking and IP telephony system.
• Good hands-on knowledge of Microsoft Server system
• Strong analytical and troubleshooting skills
• Project management knowledge
• Candidate with MCSE, CCNA certification will be a plus
• Fresh graduates are welcomed to apply

Job Duties & Responsibilities

• Research and analyze the project requirement, design the test case and develop test solution

• Take ownership of leading the quality of an assigned project and its features.

• Coordinate the execution of automated tests with a project’s testing cadence.

• Functional/ Regression testing verification.

• API and backend testing.

• Data analytics testing.

• UI and UX analysis and testing.

• Communicate with stakeholders and teammates of testing status and results.

• Contribute to collaboration with test automation team to continuously expand test coverage.

• Contribute to test case prioritization for manual and automated testing prioritization.

• Contribute to optimizing test case prioritization to increase testing velocity.

• Contribute to organisation’s Global QA improvement and project team’s quality process.

• Should have worked on Automation Tests for desktop based application

Job Requirements:

• Minimum Bachelor or Master Degree in IT/Computer Science or similar study background with 5 or more years of experience as a Software Developer Engineer in Testing (SDET)

• Good Knowledge of programming languages like Java, JavaScript and HTML

• Good to have knowledge on Banking or Finance.

• Expertise in automation testing tools like Selenium, Rest Assured , Cypress and Cucumber

• Expertise in BDD, Data Driven, Hybrid Test Automation Framework

• Hands on knowledge of desktop based app and its automation

• Able to adapt to changing business and project priorities.

• Proactive in bringing solutions to observed gaps in requirements and process.

• Proactive in test planning; able to identify and breakout tasks based on a test plan.

• Able to prioritize and execute QA tasks with minimal supervision.

• Execute tasks from QA lead or above.

• Mentor and guide junior level Associate QA Engineers and QA Engineers.

• Perform root cause analysis.

• Install and/or configure tests for systems.

• Optimize test cases for higher efficiency, especially for specific changes in code or features.

• Test client-server interaction.

• Test user behavior analytics.

• Analyze and test UI and UX requirements.

• JIRA and Confluence

Nice To Have Experience:

• Automation test result analysis and investigation of failures.

• Perform change impact analysis.

• Perform risk-based test analysis.

• Bonus skills and tools knowledge:

· GitHub and Bitbucket

· Docker

· Postman

· Jenkins CI

· JavaScript, Node.js & Selenium WebDriverIO

· Kubernetes

· Xray test case management tools

· AWS Cloud.

Interested applicants please send your resume in MS Word format and attention it to Joanna Tan (R1104661).

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

Business Registration Number: 200611680D. Licence Number: 10C5117

Process Engineer is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis. Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor's degree in chemical engineering, materials science, microelectronics or similar disciplines.
• Knowledge in process engineering, process control engineering and yield enhancement preferred
• Knowledge in SPC, DOE, FEMA, and 8D reports
• Experience in semiconductor industry would be an added advantage
• Fresh graduates are welcome to apply

Process Engineer (Backend) is responsible for development and establishment of production process.

Responsibilities

• Responsible for Backend process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control. Review and maintain FMEA, Control plan, OCAP with cross-functional teams.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line

Requirement

• Minimum bachelor's degree in material science, microelectronics, mechanical engineering or relevant engineering field
• Experience in semiconductor manufacturing industry and working in cleanroom environment
• Hands-on process experience in Backend Process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc within semiconductor IC packaging industry
• Experience in SPC, DPE, FMEA, OCAP, WI, CPK, PPK, 4D/8D report

Process Associate Engineer (Backend) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in Semiconductor and LCD processes are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machines related to production
• Monitor process via SPC chart/real time monitoring system
• Work on continuous improvement projects
• Perform lots on hold and disposition
• Support in recipe setup and qualification for production
• Troubleshoot process-related issue
• Collect engineering data
• Prepare manufacturing documents
• Maintain good housekeeping in the production area
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics Engineering or similar disciplines
• Process experience in Backend Process: Pick and Place, SMT/SMD, Ball mounting, Reflow, Laser Marking and Package Sawing
• Experience in Packing (TnR, Tray, MBB, etc) is an added advantage
• Experience working in semiconductor manufacturing environment
• Experience in manufacturing documentation of SPC, WI, SOP, FMEA, etc.
• Able to work under various shift pattern. The selected candidate will start with normal office hours, and eventually transition to 12-hour rotating shift between day and night

Equipment Engineer (Wet) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Copper Plating and Wet Etching process equipment working principle and how critical parameters will impact process and to work together with process counterpart to resolve complex integration issues
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance of Copper Plating and Wet Etching equipment
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Self-audit and update specifications to meet company Quality Standard requirements
• Provide long term solution to address daily issues. Resolve department hardware chronicle issues.
• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory
• Other ad-hoc duties as assigned

Requirements

• Minimum bachelor’s degree in electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• At least 3 years of relevant experience in equipment engineering, preferably in a semiconductor/LCD/Electronics / Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Candidates with no prior experience will be considered for junior position
• Proven ability to identify, assess and solve problems

Preferred Qualifications

• Prior experience in Advanced Packaging/LCD/foundry or similar industry background with SABRE/STRATUS/GPTC/SSEC experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Role: Resident Engineer at C2D Solutions Pte Ltd

C2D Solutions Pte Ltd is seeking an experienced full-time Resident Engineer to oversee the technical aspects of construction projects.

Key Responsibilities:

• Manage a team of technical supervisors to ensure compliance with regulatory and client requirements.
• Collaborate with Professional Engineers, regulatory authorities, and contractors for planning, design, and supervision to solve site problems and ensure timely project completion.
• Implement and maintain the site supervision quality and safety assurance system.
• Supervise structural and geotechnical works, identifying any contractor non-conformities.
• Understand and interpret drawings and contract documents.
• Conduct regular site checks to ensure compliance with health and safety regulations per MOM.
• Attend site progress and technical meetings with the project team and client to address issues.
• Ensure proper management of site documentation, including meeting records, safety documents, and submissions.

Qualifications:

• Degree in Civil/Structural Engineering from a recognized university and registered as a Resident Engineer with IES.
• Minimum 5 years of experience in supervising industrial developments, with expertise in bored piling, precast structures, and structural steel.
• Knowledge of AutoCAD and BIM is preferred.
• Strong supervisory and leadership skills.
• Effective communication skills to interact with all levels of personnel.

This role is essential for ensuring high standards in construction project execution.

Process Engineer (Wet) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in Wet process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Process Engineer (Thin Film) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in thin film process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Process Associate Engineer (Die Prep) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in semiconductor and/or electronics manufacturing industry are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machine related to production
• Process monitoring via SPC / real time monitoring system
• Work on process improvement projects
• Handle disposition and on hold lots
• Maintain good housekeeping in the production area
• Support in recipe setup and qualification for production
• Assist to troubleshoot process-related issue
• Collect engineering data
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum diploma in electrical / mechatronics / mechanical/ microelectronics engineering or similar discipline
• Minimum 2 years’ experience working in semiconductor manufacturing environment
• Minimum 2 years of experience working in Die Preparation process such as Backgrind, Dicing and Laser-grooving.
• Knowledge in basic SPC and Microsoft Office
• Flexible to work under various shift pattern. The selected candidate will start with office hours first, and eventually work on 12-hour rotating shift (day and night)

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

Company Description

Higogame is a trailblazer in the mobile gaming and entertainment industry. Since our inception in late 2020, we have been dedicated to transforming the gaming landscape in Southeast Asia and beyond, delivering innovative and immersive experiences that engage millions of players around the globe.

• Our revenue has seen remarkable growth year after year, with operations extending across multiple regions worldwide.
• In just three years, we've risen to become one of the top two games of our kind in the local market.
• We proudly serve around 2 million active users daily and have a total monthly active user base of 5 million worldwide.
• Our team consists of over 200 talented employees, including a robust R&D division of more than 100 experts.
• We offer exceptional career development opportunities and foster a multinational culture that empowers everyone to reach their full potential.

Join us as we continue to push the boundaries of mobile gaming!

Job Responsibilities:

1. Responsible for the secure operation and maintenance and development of the core transaction system database and related foundational platform systems.

2. Design and implement high availability solutions for databases to ensure 99.99% or higher availability.

3. Perform fault diagnosis and emergency response, analyzing and resolving database performance issues while accurately identifying root causes in a timely manner.

4. Optimize SQL, providing suggestions for improvement and optimization of problematic SQL queries.

5. Conduct forward-looking research on database technologies and promote their implementation and usage.

6. Provide technical consultation and system support services to project managers or system leaders.

Qualifications:

1. Over 3 years of work experience, including at least 3 years in dedicated SQL Server database operation management and technical support.

2. Proficient in using Performance Dashboard, SQL Profiler, and related diagnostic tools

3. In-depth understanding of indexing, physical and logical storage, execution plans, and blocking and deadlocking

4. Skilled in backup and restoration, DBCC, database clustering, mirroring, replication, and distribution, with a strong understanding of relevant Windows platform knowledge (clustering/AD domain). Candidates with experience in two or more database technologies, including SQL Server, will be preferred.

5. Familiar with Linux, Windows, IIS, SQL Server, Apache/Nginx, MySQL.

6. Knowledgeable about the architecture, replication, high availability, monitoring, and backup mechanisms of SQL Server and MySQL, with practical maintenance experience preferred

7. Proficient in SQL statements for SQL Server and MySQL, including writing stored procedures and designing table structures.

8. Detail-oriented, patient, calm under pressure, responsible, willing to research technology, and highly interested in DBA work, with good communication skills and a spirit of teamwork.

Responsibilities

• Coordination of Mechanical,Electrical, P&S design and installation.
• Ensure all works are carry out accordingly to drawings, specification, and compliance to authorities’ requirements.
• Site coordination and manage M&E personnel on work progress, drawings, material, samples, method statement submission and approval, to ensure quality and timely completion.
• Manage and Coordinate SWC.
• Preparation of CSD & SEM or CCSM drawings
• Monitoring of construction installation, field coordination and provide necessary problem solving.
• Carry out testing requirement, inspection with consultants.
• Conduct T&C and Handover to Client.
• Proper documentation of all test report, equipment records and As-built drawings.
• Supervision of workers and sub-contractor to ensure safety and compliance of work on site.
• Adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship.
• Other duties as assigned.

Requirements

• Minimum 5 years of engineering experience with Recognized Degree in relevant field.
• Minimum 3 years of supervision experience of M&E work in construction site for projects of similar scale and complexity.

Responsibilities:

• Improve / Create the efficient code merge process to the target codebase
• Configuration management
• Ensure accuracy and quality of installed system, perform functional and sub-system testing
• Be part of system safety group and ensure that safety measures are taken at all times
• Prepare system technical documentation and ensure smooth hand over of the system to operations and maintenance team

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related subject
• Programming skills in Python and C++

The AV Service Engineer is responsible for providing technical support, data collection, coordinating maintenance and operation activities to ensure the optimal operation of autonomous vehicles.

Key Responsibilities:

Level 1 Troubleshooting and Technical Support:

• Provide on-site Level 1 troubleshooting support (when activated) and debugging for technical issues encountered. Work with Level 2 support to identify, diagnose, and resolve basic configurations concerns, or minor hardware malfunctions.
• Collaborate with specialized teams or senior engineers to escalate complex issues beyond Level 1 for further analysis and resolution.
• Offer comprehensive customer support by resolving queries, providing technical assistance, and ensuring customer satisfaction.

Data Collection and Analysis:

• Execute routine data collection processes from data loggers, onboard sensors, software systems, diagnostic tools and feedback forms
• Analyze collected data to identify performance patterns, trends, and potential areas for optimization or preventive maintenance

Maintenance Coordination:

• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets including on-board equipment to ensure optimal functionality and safety.
• Develop maintenance schedules, ensuring adherence to protocols and manufacturer's guidelines for regular inspections, software updates, and component replacements.

Documentation and Reporting:

• Maintain meticulous records of Level 1 troubleshooting procedures, data collection findings, and maintenance activities performed on the buses.
• Generate detailed reports outlining identified issues, recommended solutions, and actions taken for each maintenance task or diagnostic analysis.

Operational Coordination:

• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet.
• Collaborate with engineering, operations, and management teams to facilitate coordination between technical tasks and operational requirements.
• Propose and implement improvements to enhance operational efficiency, reliability, and customer satisfaction.
• Any other additional duties not listed above but deemed appropriate for product and operations support by project basis.

Requirements (Must-Haves):

• NITEC or Diploma in relevant Engineering field
• Excellent communication skills and the ability to collaborate effectively with technical teams and stakeholders.
• Experience with hands-on troubleshooting of any of the following: electronics, circuitry, computers, software, mechanical installations

Requirements (Good-to-Haves):

• 1-3 years of hands-on experience in service engineering, technical support and/or operations coordination
• Good understanding of Class 4 autonomous buses equipped with SAE Level 4 autonomy, including sensor technology, control systems, and software.
• Proficiency in Level 1 troubleshooting, data collection methodologies, and coordination of maintenance activities for Class 3 and 4 vehicles and electronics equipment
• Familiarity with Unix (Ubuntu) environment

Ob behalf of our client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Senior Sales & Marketing Executive.

Responsibilities

- Achieve sales objectives within product range or assigned districts.

- Pursue sales leads, conclude orders, and initiate internal sales process and logistics.

- Provide technical solutions to Consultants prior to tender calling

- Understanding of local Codes (COP) for Equipment systems

- Attend tender interviews

- For secured contracts, to attend project meetings as and when required

- Handle variation orders

- Manage account receivables

- Visits to customers

Requirements

- Minimum diploma in Electrical/Mechanical/Mechatronics Engineering

- Proven sales record and handle of tender sales

- Good customer relationship management

- Applicants must be based in Singapore currently

Benefits

- Permanent placement

- Career progression

- Sizable organisation in the evergreen industry

Location: East

EA License: 22C0971 | EA Registration: R21101298

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:

As a SoC Design Verification Engineer, you will be you would be part of a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU chips.

• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Mentor junior verification engineers, providing technical guidance and support.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 5 years+ prior industry experience of design verification including significant System Verilog and UVM usage.
• Technical skills:

-Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

• Preferred skills:

- Knowledge of low-power design techniques and verification methodologies.

- Knowledge of hardware-software co-simulation mixed-signal verification techniques.

- Knowledge of gate level simulation methodologies.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

Job Title: Project Engineer (ID9072)
Location: Tuas
Working Hours: Mon to Fri 8.00am-5.15pm
Basic Salary: $3500
Gross Salary: $4000 - $5000

Job Description
-Involve in validation documentation for new machine/product/process/material
-Initiate product reviews. Verifies and test products. Responsible for validation, trial run for new projects and customers.
-Responsible for change control process and procedure development and implementation.
-Responsible for new job development.
-Provide technical support to customers.
-Provide QA support to project development
-Involved in new machine installation and process improvements.

Requirement:
• Min 1 year working experience in manufacturing environment
• Aircon Environment
• Company transport provided at Lakeside MRT, Jalan Boon Lay & Pioneer Mall & Pioneer MRT

Job Title: Engineer (CMTD) – Concrete Testing

1. To attend to clients’ enquiries and technical issues
2. To prepare and follow up on quotations sent to clients
3. To open job and follow through the job i.e. testing, report writing, report endorsement and draft invoice preparation
4. To prepare worksheets for new tests and assist to review existing worksheets
5. To lead and assist colleagues/ subordinates to ensure smooth operation of Concrete Lab
6. To provide support in the development of new tests
7. To provide and participate in corporate activities such as safety, internal/external trainings, work improvement, etc.
8. To participate in SAC SINGLAS Accreditation Assessment and achieve approved signatory
9. To support other sections when required e.g. Thermal lab/ Cement Lab/ Cube lab
10. To handle any other assignments, eg. ad-hoc duties and posting, etc. as assigned by supervisor from time to time

Requirements

• Minimum Degree in Civil Engineering
• Keen to learn
• Possess positive attitude