Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Architectural Engineer- job Posting

Position Overview: We are seeking a motivated and detail-oriented Project/Site Engineer for Architectural and Structural systems to assist in the supervision, coordination, and execution of construction projects. The ideal candidate will play an integral role in managing various site activities, ensuring quality control, and facilitating communication between internal teams, subcontractors, and clients.

Key Responsibilities:

· Assist in architectural system site supervision works, ensuring quality and progress.

· Coordinate project planning, documentation, and execution of works on-site.

· Oversee project works, manpower mobilization, material planning, and ordering.

· Communicate internally with various departments and externally with clients and subcontractors.

· Coordinate and follow-up on project submissions to authorities.

· Produce regular site progress reports and submit necessary documentation.

· Attend meetings and conduct site inspections to ensure quality control.

Additional Responsibilities:

· Manage all aspects of architectural system site works.

· Supervise manpower scheduling and deployment to meet project timelines.

· Ensure the timely completion and quality of subcontractor works.

· Prepare and submit method statements and other required reports.

· Review and monitor architectural and structural system drawings and approval statuses.

· Collaborate with project managers and stakeholders to resolve site issues.

Qualifications and Requirements:

· Minimum 1-5 years of experience in construction projects.

· Strong communication skills and ability to interact with people at all levels.

· Familiarity with project management processes across all project stages.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Responsibilities

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Key Responsibilities:

• Provide remote and on-site technical support, including but not limited to, Incident Management and Problem Management

• Escalate incidents, problems, changes to Team Lead, Service Delivery Manager, Account Manager or vendors as per defined business rules, ensuring timely resolution of client service requests

• Liaise with vendors needed to achieve incident and problem resolution.

• Maintain detailed knowledge of clients’ environments, where applicable, by maintaining and updating relevant documentation.

• Provide high levels of customer service and resolving problems/issues with the client in a constructive manner.

• Prepare adhoc reports as required for contractual requirements.

• Contribute to ITIL based processes to ensure successful delivery of services and initiate solutions to improve quality and productivity

• Participate in client presentations when necessary

Job Requirements:

• CCNP or CCIE in Enterprise is required

• Hands-on experience in installation, configuration and troubleshooting of Cisco routers, wireless or switches

• Have some working knowledge of Cisco Routers, Switches, SD-WAN, DNA, Wireless products in addition to Meraki Switch, Router, Wireless products

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• At least 3 years of experience in a technical support environment working with Cisco products

• Experience with VMWare NSX and VMWare Load balancers, is an added advantage

• Knowledge of Aruba, Bluecoat, Ironport, F5, Checkpoint, Fortigate or Juniper products is also preferred

• Able to work in a 24x7 and team environment

Job Description:

We are looking for a Mechanical Engineer to assist in site supervision and coordination for a construction project. Key duties include overseeing project execution, managing progress, coordinating with stakeholders, and ensuring quality control.

Responsibilities:

• Assist in system installation and commissioning.
• Coordinate project planning, materials, and manpower.
• Supervise subcontractors and monitor work progress.
• Conduct site inspections and ensure compliance with standards.
• Prepare reports and documentation as required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 1-5 years of relevant experience in construction projects
• Good communication skills and project management knowledge.
• Experience in wafer fabs or pharmaceuticals is a plus.

Job Description

• Work closely with external IT vendor, coordinating and supervising all IT related services and work done by external vendors.
• Maintaining and troubleshooting computer systems and network, including cybersecurity.
• Installing and configuring new hardware and application software.
• Conduct applications training for internal stakeholders.
• Tracking and managing IT related problems and issues.
• Address any issues related to ICT security, performance, and applications availability.

Qualifications

• 2+ year work experience with a Diploma/Degree in Computer Science, Information System or equivalent.
• Experience in Microsoft 365 platform. Experience in Microsoft Power Platform is an added advantage.
• Excellent verbal, written, and interpersonal communication skills.
• Excellent analytical problem-solving and critical thinking skills.
• Service oriented and positive working attitude
• Team player, proactive and willing to learn new technologies

Job Responsibilities

• Project coordination and Supervision of ACMV site progress
• Attend site meetings
• Coordination with sub-contractors
• Reporting Project Progress
• any other duties assigned

Job Requirements

• Fresh Graduate Welcome
• Degree in Engineering / Materials
• Working days per week: 6
• Working hours : 0830 - 1730hrs

Job Description:

The Project/Site Engineer will assist in the supervision and coordination of Electrical & Control systems for construction projects. The role involves monitoring project progress, managing resources, and ensuring quality standards are met. The engineer will work closely with internal teams, clients, subcontractors, and suppliers to ensure timely project execution and compliance with technical requirements.

Responsibilities:

• Supervise and assist in the execution of Electrical & Control system works on-site.
• Coordinate project planning, documentation, and execution.
• Monitor project progress, manpower mobilization, and material planning.
• Liaise with internal teams, clients, subcontractors, and suppliers to resolve issues.
• Conduct site inspections and ensure quality control.
• Manage the preparation and submission of method statements, shop drawings, and other required documentation.
• Report to the Project Manager (PM) or Construction Manager (CM).

Requirements:

• Diploma or Degree in Electrical Engineering or related field.
• 1-5 years of experience in construction projects.
• Strong communication skills and ability to collaborate across departments.
• Knowledge of project management processes.
• Experience in wafer fabs or pharmaceuticals is a plus.

Jason Energy Pte Ltd, a wholly owned subsidiary of Jason Marine Group Limited has significant experience in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised Telecommunication System Integrator in the oil and gas global market, we provide turnkey project systems that covers a full spectrum of services from the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

We are looking for a Project Engineer to prepare, schedule, coordinate and monitor the projects that are being assigned to him/ her. Reporting to the Project Manager in the Project Team, he/ she will

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements:

• Diploma or Degree in Engineering or relevant field
• Proven working experiences as a project engineer
• Project management and organizational skills
• Commitment to exceeding customer’s expectations
• Time management and organization skills

Good to Have

• MS Office Skills
• Microsoft Project Skill
• Dynamic Business Central knowledge will be an advantage
• Negotiation skills

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

About the team:

The Enterprise Technology team is a diverse and collaborative group of professionals responsible for driving the technological advancements within GXS Bank. We work on cutting-edge projects that aim to enhance the bank's infrastructure, security, and operational efficiency. Our team is at the forefront of innovation, leveraging the latest technologies such as cloud computing, artificial intelligence, and data analytics to deliver exceptional solutions.

About the Role:

The End-User Computing (EUC) Specialist/Engineer will be responsible for managing and supporting the endpoint devices used by GXS Bank employees. This includes desktops, laptops, mobile devices, and peripherals. The role involves ensuring the reliability, security, and optimal performance of these devices, addressing technical issues, and implementing best practices for endpoint management.

Key Responsibilities:

1. Endpoint Device Management

• Oversee the deployment, configuration, and management of endpoint devices (desktops, laptops, mobile devices, etc.).
• Manage and maintain device lifecycle, including procurement, setup, patch management, and decommissioning.
• Ensure devices are compliant with security policies and regulations.

2. Technical Support and Troubleshooting

• Provide first and second-level technical support for endpoint devices.
• Diagnose and resolve hardware and software issues, including connectivity, performance, and application problems.
• Escalate complex issues to higher-level support or external vendors as necessary.

3. Software and Patch Management

• Deploy and manage software applications and updates across endpoint devices.
• Implement and monitor patch management processes to ensure devices are up-to-date and secure.
• Utilize endpoint management tools (e.g., Jumpcloud, Automox, Microsoft Endpoint Manager, SCCM, Intune) for software distribution and compliance monitoring.

4. Security and Compliance

• Implement and enforce security measures, including antivirus software, encryption, and endpoint protection solutions.
• Conduct regular security audits and vulnerability assessments on endpoint devices.
• Ensure compliance with internal security policies and external regulations (e.g., MAS, NIST, CIS).

5. User Training and Documentation

• Create and maintain documentation for device configurations, troubleshooting procedures, and best practices.
• Conduct training sessions for end-users to enhance their understanding and effective use of endpoint devices.
• Develop FAQs and knowledge base articles to support self-service and reduce sup
• port requests.

6. Performance Monitoring and Reporting

• Monitor endpoint device performance and usage metrics to identify trends and potential issues.
• Generate regular reports on device health, support ticket resolution times, and user satisfaction.
• Provide recommendations for system improvements based on performance data.

7. Collaboration and Communication

• Work closely with other IT team members, business units, and external vendors to ensure cohesive support and implementation of endpoint management solutions.
• Communicate effectively with stakeholders to understand their needs and address technical concerns.
• Participate in regular team meetings and contribute to strategic planning for IT services.

Qualifications:

Education: Diploma/bachelor’s degree in computer science, Information Technology, or a related field.

Experience:

• Minimum of 3 years of experience in IT support or endpoint management.
• Hands-on experience with endpoint management tools (e.g., Automox, SCCM, Intune, Jumpcloud).

Technical Skills:

• Proficiency in troubleshooting and resolving hardware and software issues on endpoint devices.
• Knowledge of endpoint management tools for software deployment, patch management, and compliance monitoring.
• Familiarity with scripting languages (e.g., PowerShell, Python) for automation tasks.
• Understanding of IT security practices and endpoint protection solutions.
• Experience with mobile device management (MDM) solutions.

Soft Skills:

• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Customer-focused mindset with a commitment to delivering high-quality support.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Engineer will work closely with the Principal Investigator on several research projects on using machine learning in chemical and optimization problems
• The Research Engineer will help to develop machine learning models for both theory and applications in advanced control systems

Job Requirements

• B.S. or M.S degree in a relevant area, e.g., Chemical Engineering, Control Engineering, Computer Science, Chemistry, etc.
• Experienced in machine learning, optimization and programming languages (e.g., python, Matlab, C++, etc)
• Any experience with 1) advanced control, 2) machine learning theory and applications, and 3) chemical engineering and chemistry is a plus

Working location: Thomson

Job Summary:

This role is responsible for overseeing the testing and commissioning of electrical equipment on-site, ensuring adherence to project specifications and safety standards. The successful candidate will play a key role in verifying the proper installation and functionality of electrical systems, collaborating with clients and contractors to achieve successful project completion.

Key Responsibilities:

• Directly supervise and coordinate on-site testing and commissioning activities for electrical equipment, ensuring compliance with relevant codes, standards, and project requirements.
• Review, prepare, and submit comprehensive site acceptance test reports, documenting test procedures, results, and any identified discrepancies. Maintain accurate records of all testing and commissioning activities.
• Thoroughly review single-line diagrams, electrical schematic drawings, and other technical documentation to ensure proper system understanding and identify potential issues.
• Conduct and/or assist in electrical equipment installation inspections to verify compliance with design Actively participate in site activities and meetings involving clients, contractors, and other stakeholders, providing technical expertise and ensuring effective communication.
• Identify and troubleshoot electrical system issues during testing and commissioning, implementing corrective actions as needed.
• Enforce strict adherence to all safety protocols and procedures during testing and commissioning activities to ensure a safe working environment.
• Undertake tasks and assignments as directed by the Commissioning Lead, prioritizing effectively and meeting deadlines.

Job Requirements:

• Degree in Electrical Engineering
• Minimum of 2 years of local working experience in electrical testing and commissioning within a relevant industry (e.g., construction, infrastructure, power generation).
• Solid understanding of electrical principles, codes, and standards (e.g., IEC, IEEE, BS).
  Proficiency in interpreting single-line diagrams, electrical schematics, and other technical drawings.
  Practical experience in testing and commissioning MV/LV electrical equipment (e.g., switchgear, transformers, protection relays, cables).

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845

Job Summary:

We are seeking a highly skilled and motivated medical device Product Development Engineer to join our dynamic team. The successful candidate will be responsible for the design, development, and maintenance of software products that meet regulatory requirements for medical devices. This role requires a good understanding of both software engineering and medical device regulations, ensuring our products are safe, effective, and compliant.

Key Responsibilities:

• Collaborate with software development team to design, develop, and maintain software applications intended for use as medical devices.
• Collaborate with cross-functional teams, including clinical, regulatory, quality, and marketing to implement product requirements and specifications.
• Ensure software design complies with relevant medical device regulations and standards (e.g., IEC 62304, ISO 13485, HSA guidelines).
• Work closely with regulatory affairs to ensure software products meet all necessary regulatory requirements and obtain required certifications and approvals.
• Prepare and maintain documentation required for regulatory submissions and audits.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software development, preferably in the medical device industry.
• Experience with regulatory compliance for medical devices.
• Familiarity with software validation and verification processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Remuneration: $3,500 - $4,000

Working Hours: Mon - Fri, 7:30am - 5pm

Key Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.

Job Description:

• Minimum 2-3 years working experience in manufacturing environment.
• Nitec / Higher Nitec / Diploma in M&E or Mechanical Engineering
• Able to supervise and lead the subordinates.
• Willing to work after working hour or during non-working days.
• Able to work under pressure.
• Computer literate.
• Knowledge in ISO would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Position : Project Engineer (A&A Construction) - Up to $6,500 + Bonus
• Office Location : East - Aljunied
• Working hours : 5.5 days - Monday to Friday | 8am to 6pm | Saturday 8am to 12pm
• Salary (commensurate with experience) : Up to $6,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Building Construction

Main Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Organize labor, equipment and material for day to day site activities
• Carry out material receiving inspection and maintaining material record.
• Prepare daily and monthly progress report, perform and maintain inspection record.
• Any other duties assigned

Requirements:

• Minimum of Degree in Architectural/ Building / Construction Management or related; with at least 3-5 years of experience.
• Great team player with pro-active attitude.
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Technical Support Engineer (Automation Products) – Up to $4,500 + AWS
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Provide pre-sales support and post sales application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Support technical requests/support, respond to customer queries and issues of our customers over telephone or email.
• Documentation and recording of all service, support and application activities
• Conduct product training and demonstration to customers
• Work closely with sales team to maintain existing customers’ relationship.
• Using product application knowledge to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Build up relationship with our product's principal and provide customers’ feedback to product's principal for service and/or products enhancements.
• Value-add to customers’ needs and strengthen relationships with them.

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Job Title: Marine Technical Engineer (ID8359)
Location: Bukit Batok, Singapore
Must have technical and operations knowledge on marine vessel operations & maintenance
Salary: $3400 - $5000

Job Description:
- Managing and Overseeing daily vessel operations, including movements, documents and risk management.
- Ensuring compliance for Port state.
- Handling and checking ship and cargo documents, including customs compliance for international shipment, raise purchase procurement and purchase order for vessel request maintenance and repair.
- Tracking and reviewing of approved purchase requisition for all vessel.
- Assisting relevant departments with claims such as demurrage, cargo shortage, and commercial.
- Submitting monthly statistical reports, including operating rate statistics, demurrage and voyage reporting.
- Improving ship efficiency and reduce operational risk
- Engaging and deploying sea staff for vessel assignments.
- Managing planned maintenance system (PMS) repairs and maintenance activities documentation and report filling into marine department archive.

Requirement:
- Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
- Knowledge of international maritime regulations and environmental standards.
- Minimum 3-5 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.
- Willingness to travel and work in challenging environments (e.g., shipyards or offshore).
- Proficient in English (Spoken and Written) & Microsoft Office.
- Team player and able to work within time constraints.
- Strong sense of integrity and professionalism.

Job Title: Sales Engineer (ID4617)
Location: Tuas
Working Hours: Mon to Fri 8.15am – 5.30pm
Salary: $4000-$5000

Sales Engineer
The role is to market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors.

The successful applicant must
• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarise our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels

Candidate should
• Be customer and sales oriented
• Possess a strong sense of self-discipline, integrity & initiative; work well independently, yet be a good team player

• Position : Service Technician or Engineer-HVAC/ACMV
• Working hours : Monday to Friday | 8.30am to 5.30pm
• Location: Office in Boon Lay-Islandwide
• Salary (commensurate with experience) : Up to $4200 Basic + $50 Transport allowance + $50 mobile + Minimum 2 months Variable Bonus (max up to 5 MONTHS BONUS) + 16 days Annual Leaves + Medical Benefits + Overtime
• Duration : Permanent
• Industry : Refrigerating, Air-conditioning & Ventilation Machinery - MNC

Main responsibilities :

• Able to carry out corrective and preventive maintenance for chillers and related equipment
• To perform chiller overhaul – dismantle & re-assemble the major components
• Coordination with vendors and contractors, ensure all works carried out in accordance with specified quality and EHS standards
• Liaising with customers to resolve the chillers issues
• May be assigned to lead a team of technicians to fulfill jobs assigned – for engineer
• Assist or involve in schedule planning & prepare works related reports – for engineer
• Any other duties as deemed necessary from times to times

Requirement:

• ITE / Diploma in Mechanical, Electrical, Electronic Engineering or equivalent
• Min 2-5 years of relevant experience in Machinery overhaul
• Willing to performing physical activities, such as climbing, lifting, balancing, walking, stooping, and handling of materials.

Email to [email protected]

Do visit Search Personnel Pte Ltd for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior / Associate Engineer to be part of our Thin Film diverse team of talent. You will support the running of Production and ensure equipment readiness and worthiness for production.

What you will be working on:

• To assist Thin Film equipment engineers to sustain equipment performance and perform schedule & adhoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assist new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment.
• Some knowledge in Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Position : Service Engineer/Manager-Chillers/HVAC/ACMV
• Working hours : Monday to Friday | 8.30am to 5.30pm, Saturday half day 8.30am-12.30pm (on standby when required only)
• Location: Tuas
• Salary (commensurate with experience) : Up to $5000 Basic + Petrol reimbursement up to $400 per month, + Transport allowance/reimbursement + Bonus + Medical Benefits
• Duration : Permanent
• Industry : Heat Exchange Equipment

Main responsibilities :

• Perform servicing and maintenance on chiller
• To perform chiller overhaul – dismantle & re-assemble the major components
• Coordination with vendors and contractors, ensure all works carried out in accordance with specified quality and EHS standards
• Liaising with customers to resolve the chillers issues
• May be assigned to lead a team of technicians to fulfill jobs assigned – for engineer
• Assist or involve in schedule planning & prepare works related reports – for engineer
• Any other duties as deemed necessary from times to times

Requirement:

• ITE / Diploma in Mechanical, Electrical, Electronic Engineering or equivalent
• Min 2-5 years of relevant experience in Machinery overhaul
• Able to Perform servicing and maintenance on chiller
• Able to Repair and troubleshooting on chiller will be an advantage

Email to [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

working location: Ang Mo Kio , Yio Chu Kang, Central

Job Description

Manage & Lead the electrical team.

Perform engineering duties such as design, engineering calculations, planning, tender. Preparation/evaluations as part of the engineering project team

Team development QA/QC documentation review of engineering deliverables

Liaison with clients, project managers, architects, contractors

Resolve any technical problems faced during project design and/or construction stages

Suggests ways to increase revenues and efficiency.

Testing & Commissioning of the ACMV Electrical Systems

Ensure the team follows all electrical codes and standards.

Job Requirements

Any qualification in a relevant engineering field with minimum 5 years of related working experience in the Construction Electrical Field associated with ACMV / Electrical.

Engineering design of commercial buildings, major infrastructure transportation projects and mixed-use developments

Possess design experience and good understanding of ACMV / Electrical technical systems and procedures.

Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as cable, generators, panels, etc.

Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

Productions of drawings and developing models Site Experience, Testing & Commissioning Experience Having experience working with Infrastructure Projects would be an added advantage.

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845