SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a ISEP Senior Engineer to be part of our Facilities Department diverse team of talent. You will be responsible to provide support pertaining to Environmental, Health and Safety to wafer fabrication for the company

What you will be working on:

• Familiar with WSH Act, Fire Safety Act and ISO 45001, ISO14001, SS651 so as to ensure compliance to these requirements, including Statutory Equipment & Licenses.
• Ensure that the EHS Management Systems are implemented, maintained, and compliant with all applicable local legislation.
• Ensure safety case implementation and mitigative measures for Safety-Critical Events (SCE) in Major Hazard Industries (MHI).
• Develop, maintain, and periodically test emergency response plans, conduct CERT audits, and lead emergency drills including training, maintain procedure and implement all the requirement.
• Compliance with regulatory and permit/ licenses requirements, through Monitoring & Measurement and standard, work to ensure proper management and accurate reporting.
• Implement of EHS programs to improve awareness and performance towards established goals actively.
• Manage EHS incidents and non-conformance investigations, ensuring corrective and preventive actions are tracked and closed.
• Schedule and coordinate EHS related meeting, inspection and audit (External / Internal)
• Manage, schedule and coordinate EHS trainings including training and revision of training materials.
• Manage EHS reports, EHS bulletin/Alerts Manage and other communications
• Revise and write EHS procedures and work instructions.
• Manage work permit system and contractors management.
• Any other duties as assigned by Manager

More about you:

• Minimum Diploma / Bachelor in Science or Engineering in Environmental, Chemical or equivalent
• Familiar with local regulatory requirements related to workplace safety and health, and all other aspects of safety.
• Strong understanding of chemical safety regulations, ISO45001, ISO14001 and SS651
• Certificates in EHS Internal Auditing (ISO 45001, ISO 14001, SS651) will be significantly advantageous
• Registered Workplace Safety and Health Officer and Fire Safety Manager

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Tasks:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• 5 years of relevant work experience in Etch Equipment in the semiconductor industry
• LAM tools preferred
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

NetVirta is a fast growing, venture-backed startup in the fashion fit technology space. If you’ve had difficulty shopping online because you couldn’t find clothing or footwear that fit, you’ve experienced the problem we address. It’s an issue that troubles shoppers around the world and NetVirta is uniquely positioned to solve it.

Founded by two MIT graduates and located in Boston and Singapore, NetVirta is the world’s leading fit technology provider for medical, retail and sports equipment brands, helping customers order the right size with precision 3D body scanning. We began serving the medical industry in 2013, helping doctors scan medical patients to create custom-fit orthotics and prosthetics. In 2017, we expanded to enable NFL and NCAA football players to obtain custom-fit helmets. Fast forward to 2022, NetVirta’s closed deals with multiple clothing and footwear brands in North America, Europe, and Asia.

We are proud to be certified as Great Place to Work® in Singapore.

What can you expect?

We are seeking a Machine Learning Engineer / Researcher who will assist the development and deployment of advanced machine learning models to power our recommendation system and search engine. In this role, you will have opportunities to work with state-of-the-art AI techniques, including large language and vision models, integrating them to complement our recommendation system and search architecture. You will also play a vital role in maintaining and evolving our AI systems throughout the different growth stages.

Responsibilities

• Build scalable recommendation and search engines tailored to fashion content.
• Lead the design, development, and optimization of machine learning models, especially in the context of fashion recommendation systems and search engines.
• Integrate various techniques to help tackle cold start problems, including

1. Content-based recommendation
2. Leveraging implicit user interaction signals
3. Large language (vision) models

Required Skills & Experience

• Bachelor’s, Master’s or PhD degree in Machine Learning, Computer Science, or a related field.
• Experience with Python and machine learning frameworks (eg., TensorFlow, PyTorch).
• Prior hands-on experience with recommendation & search systems and knowledge of its key components (retrieval, re-ranking, cold-start, etc).
• Familiarity with using large language models and computer vision techniques.
• Ability to collaborate in a fast-paced, cross-functional environment with strong communication and teamwork skills.

Good-To-Have

• Knowledge of reinforcement learning (e.g. multi-armed bandits and related techniques).
• Prior industry experience with A/B tests in the context of recommendation systems.
• Good understanding of the infrastructure behind large-scale recommendation and search systems.

What else is awaiting you?

• Career development opportunities, like mentoring, career exploration through a Japanese concept called Ikigai.
• Learning is fundamental to our culture, your growth together with Netvirta's are paramount to how we can transform the industry.
• Besides hard work, we value your well-being and want you to have fun too! Attractive compensation and benefits as well as engagement and welfare activities awaits you.
• Work alongside with friendly colleagues in a positive environment.

Responsibilities:

• Solutions delivered on time and on budget.
• Perform maintenance on time.
• Provide timely and satisfactory issues resolutions.
• Conduct training, presentation to internal and external customers.
• Manage internal and external customers.

During System Implementation Phase:

• At site survey to ensure infra and network is in accordance to solutions requirements.
• Install, Configure solutions at sites.
• Manage User Acceptance testing at sites.
• Conduct User training at sites.
• Document handover items for customers at sites.

During Maintenance Phase:

• Ensure all delivered solutions are in operation.
• At site or remote to support and troubleshoot issues related to the delivered solutions.
• At site to perform solutions preventative action, monthly patching or upgrade.
• At site testing and delivery of Samsung devices.
• Work closely with the HQ Technical Support & R&D for critical issues escalation and VOC compilation.

Requirement:

• Diploma or Degree in Computer Science or Information System related fields
• Server and/or cloud certificate is highly preferred.
• At least 2 years of experience in network administration, QA testing, software installation and maintenance.
• Knowledge in the use of VM software and system OS (Windows Server, JAVA, Apache Tomcat, Redhat, Ubuntu, etc.).
• Knowledge in the configuration management such as AD, CA, DNS etc.
• Knowledge in the use of database: MSSQL, MYSQL etc.
• Knowledge on Cloud (i.e., AWS, Azure, or similar) and on-premises infrastructure deployment.
• Excellent problem solving, and analytical thinking.
• Good at documentation (specification, user guide creation)
• Excellent communication skills; able to present technical topics to non technical audience.
• Subject to government G50 clearance (compulsory)

Preferred Qualification:

• Knowledge in MDM related solutions and technology (such as Samsung Knox, Android Enterprise, VMWare Workspace ONE, MobileIron, Citrix Endpoint Management, Microsoft Intune, and etc) are a plus.
• Programing and software development skill in Java, XML, HTML, Android development are a plus.
• Project Management experience and/or certificate.
• Experience in designing cloud system environment, able to manage cloud resource with automation.
• Ability to take up a new technology and perform development based on client requirements.

Responsibilities:

Design mould, tooling and test socket solutions based on customer specifications, semiconductor packages, and testing requirements.

Utilize CAD tools (such as CREO, AutoCAD, SolidWorks, or similar) to create detailed 3D models and technical drawings.

Ensure designs meet mechanical, thermal, and electrical performance requirements for high-precision semiconductor testing.

Select appropriate materials, tolerances, and manufacturing methods to ensure product durability, precision, and cost-effectiveness.

Able to carry out the R&D of new test socket whenever the market trend is needed.

Work closely with cross-functional teams, including Sales, Product Development, Process Engineering, and Manufacturing, to refine designs and ensure compatibility with testing equipment and processes.

Provide technical support to manufacturing teams during prototyping, production, and assembly to resolve any design-related issues.

Engage with customers and vendors to ensure all moulds, tooling and test socket solutions meet functional requirements and industry standards.

Oversee the prototyping phase, ensuring that initial designs are built and tested effectively.

Lead or participate in validation and testing efforts to ensure the tooling and test sockets perform under specified conditions (e.g., temperature, mechanical stress, electrical signals, thermodynamics).

Analyse test data and provide feedback for continuous improvement in design and materials.

Continuously seek to improve design efficiency and product performance, optimizing socket contact interfaces, reducing testing time, and improving signal integrity.

Innovate by introducing new design techniques, materials, or technologies that improve the quality, reliability, and cost of the test sockets and tooling solutions.

Stay up-to-date with the latest semiconductor technologies and testing methodologies to ensure cutting-edge designs.

Develop and maintain comprehensive documentation for all designs, including detailed engineering drawings, materials specifications, and manufacturing processes.

Create user manuals and technical documentation to guide customers and internal teams on the proper usage of tooling and test sockets.

Qualifications:

At least Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.

5+ years of experience in mould & tooling design AND test socket design within the semiconductor industry or a related field.

Proven experience in designing test sockets, jigs, fixtures, and other related components for semiconductor testing.

Proficiency in & Hands-on experience with CAD software for mechanical design and simulation (e.g., CREO, SolidWorks, or AutoCAD).

Understanding of semiconductor testing processes and requirements (ATE – Automated Test Equipment).

Strong mechanical design and analytical skills.

Knowledge of materials science, particularly in relation to thermal management, wear resistance, and conductivity in socket designs.

Familiarity with signal integrity, high-speed test interfaces, and electrical characteristics relevant to test socket performance.

Excellent problem-solving skills, with the ability to identify and address complex technical challenges.

Strong attention to detail and precision in design and documentation.

Ability to work independently and as part of a cross-functional team.

Familiarity with industry standards for semiconductor testing (JEDEC, EIA, etc.).

Effective communication skills for both internal team coordination and customer interactions.

Willingness to travel occasionally for customer visits, manufacturing site inspections, or vendor meetings.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Position: Project Engineer (CONSTRUCTION)
• Location: Paya Lebar Quarter
• Working Hours: 6 days work week
• Salary (commensurate with experience): Up to $5,500 + 14 Days Annual Leave + Performance Bonus + Medical/Dental Benefits
• Duration: Permanent
• Industry: Fireproofing

Main Responsibilities:

• Responsible for the smooth completion of the assigned project, in terms of both documentations and operational aspects
• Attend site meetings with the Main-Contractor whenever necessary
• Plan and make sure site work progress follows the Schedule
• To work closely with office staff to prepare monthly Progress Claims, Payment Certificates
• To ensure the works are executed in accordance with approved plans/drawings and in accordance with contract specifications
• Manage and account for all materials & equipment delivered to site
• To manage workers’ time schedule
• Any other ad hoc duties assigned

Requirements:

• Minimum Diploma in M&E, Construction Management or equivalent
• At least 1 year relevant work experience
• Possess good communication skill to manage project team and stakeholders

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Overview:

As a 5G System Test Engineer, you will be involved in the testing and verification of 5G communication systems, ensuring our products meet international standards and customer requirements, contributing to the stable and efficient operation of 5G networks. You will have the opportunity to gain deep insights into core 5G technologies, master advanced testing methods and tools through hands-on experience, laying a solid foundation for your career.

Core Responsibilities:

1. Participate in functional testing, performance testing, compatibility testing, and stability testing of 5G communication systems to ensure they meet design requirements and industry standards.
2. Design and execute test cases based on testing needs, record test results, analyze, and report issues found during testing.
3. Assist the development team in reproducing and locating issues found during testing, tracking the progress of issue resolution until closure.
4. Learn and master the latest 5G testing standards and specifications, continuously optimizing testing processes and methods to improve testing efficiency and quality.
5. Participate in the setup and maintenance of the testing environment, including the installation, configuration, and upgrading of testing software and hardware.
6. Collaborate with the project team in the formulation and review of testing plans, ensuring testing activities are completed on time and with high quality.

Qualifications:

Education Background:

• Bachelor's degree or above in Computer Science, Electronic Information Engineering, Communication Engineering, or related fields, fresh graduate.

Professional Knowledge:

• Familiar with basic knowledge in communication principles, digital signal processing, and computer networks; prior knowledge of 5G technology is preferred.

Skills:

• Possess good logical thinking and problem-solving abilities; understand basic software testing processes and methods; have a programming background (such as Python, C/C++) is a plus.

Attitude and Qualities:

• Strong sense of responsibility, attention to detail, good teamwork spirit and communication skills; willing to continuously learn new knowledge and adapt to a fast-paced work environment.

• Position : Site Engineer - Up to $4,200 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,200 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Create solutions to complex technical problems in life science, Power, water treatment, chemical and petro-chemical, shipyard and oil and gas plants.
• Do field/ bench Calibration of measuring instruments like Pressure, Temperature, Flow, radar level, analyzer, wireless and collect data
• Calculate calibration range, mA, Freq, required output and accuracy before doing calibration and record the result during calibration
• Analyze and compile technical and statistical information and prepare report
• Maintain accurate engineering documents

Requirements:

• Minimum Diploma in Electrical / Electronic / Instrumentation
• Minimum 3 years of relevant experience in the same field
• Knowledge relating to Mechanical and Measuring Instruments
• Technical report writing and able to read the schematic diagrams
• Preferably with Class 3 Driving License
• Bilingual in English & Mandarin to liaise with Chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position : M&E Coordinator/Engineer (A&A Industry) - Up to $5,500 - All Welcome
• Location : Based on Project Sites
• Working hours : Monday to Saturday | 8am to 6pm (Saturday working hours based on site)
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Assist M&E Manager in coordinating M&E specific works on site.
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing OA/QC inspections to meet wi construction schedule.
• Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices.
• To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendor
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site co-ordination meeting and provide detail co-ordination with sub contractors.

Requirements:

• Minimum of Diploma in M&E Engineering or relevant; with at least 2 years of experience.
• Willing to work on weekends if site required.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : ALL WELCOME - Technical Sales Engineer (NO EXP REQUIRED/TRAINING PROVIDED) - Up to $4500
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Responsible for preparing quotations, proposal according to customer’s requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analysing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products..

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

OTSAW Digital is seeking creative, energetic well-rounded Product Development Engineer to work in the field of autonomous robot technology.

You will be responsible for integrating and testing software solutions in simulation and on the robot. We are looking for engineers who are interested in tackling challenging problems for our robots.

At OTSAW Digital, we want people with passion. We want innovators. We want people who can collaborate and bring us a creative future. So, if you are passionate about working in a startup, want to solve hard problems and make cool robots with us, please apply.

Responsibilities:

• Oversee and in charge of technical matters (both Software and Hardware) for assigned product line.
• Support Commercial Team in technical evaluation of new projects requirement, translating customer needs into product design and development requirements.
• Conceptualize and prototype new product ideas.
• Design and conduct validation test for new product functions, features.
• Fine-tuning product designs until they are ready for production.
• Delivering product specifications and procedures to the manufacturing team for production purposes.
• Delivering product specifications to the commercial team for sales purposes.
• In charge of troubleshooting and correction for technical issues escalated to R&D department.
• Coordinate and manage Development projects for assigned product line.

Requirements:

• 2-3 years working experience in relevant fields.
• Min. education qualification: Bachelor Degree in Robotics Engineer, Mechatronics, Computer Engineer, Electrical Engineer, Mechanical Engineer or other Engineering related course
• Strong foundation in Electrical, Mechanical and Software System are preferred
• Demonstrate deep interest & understanding in relevant domain of interest
• Experience in developing on actual physical robot is a plus
• Experience in any of the following C++, Python, ROS, JS, Git, Autodesk Eagle, Autodesk Inventor is a plus

As an Associate Engineer in Product Support Organization, within the Aftermarket Products & Services (APS) Business Unit, this role is responsible for the technical activities that support the repair and refurbishment of goods. This includes the completion of the quality of goods meeting schedule timelines.

The Associate Engineer ensures smooth repair and refurbishment of goods:

• Repair and refurbishment support: Ensure assemble of goods with accuracy
• On time delivery: completion of work order within the scheduled time frame

Responsibilities

• Create repair and/or refurbishment work orders.
• Expedite support and coordinate the replenishing of materials and work with materials planners to proactively solve raw material issues.
• Ensure materials are issued correctly as per work order.
• Perform Troubleshooting and Diagnostic based on Troubleshooting Guide
• Perform bonding and data collection based on Standard Work Instruction and Test Procedures (~2 - 4 hours standing and using microscope)
• Disassembly, assembly and Testing of Mechatronics Assemblies module to Standard Work Instruction and Test Procedures.
• Update system records in a timely upon completion.
• Support Agility Training to all Product Lines based on Supervisor’s assignment.
• Performs other duties as assigned.

Qualification

• Minimum qualification of Vocational Certificate/NITEC in Electrical or Mechanical Engineering
• Minimum experience of 2 years in the semiconductor/ manufacturing industry
• Basic knowledge of wire bonding and/or die bonding technology is preferred
• Able to work independently to troubleshoot and analyze machines and spares issues when needed
• Possess good written and communication skills
• Proficient in Microsoft Office (Excel, PowerPoint and Words)

Company Overview

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Senior Data Engineer

Institution: National Healthcare Group
Family Group: Administration

The Senior Data Engineer leads the creation, maintenance, and strategic development of our advanced data analytics infrastructure, which is vital to the hospital's data-driven decision-making processes. This role oversees the acquisition, storage, retrieval, and optimization of data from various sources to support clinical, operational, and research initiatives. The position directly supports the work of the Group Chief Data Officer (GCDO) for Data Analytics and provides leadership to the data engineering team.

Leadership and Management:

• Lead and mentor a team of data engineers, fostering their professional growth and ensuring high-quality deliverables.

• Develop and implement best practices, standards, and architectural decisions for data engineering processes.

• Collaborate with cross-functional leadership to align data engineering strategies with organizational goals.

• Drive innovation in data engineering practices and technologies within the organization.

Strategic Planning and Execution:

• Develop and execute the long-term vision for the data engineering function, aligning with the institution's overall data strategy.

• Identify opportunities for process improvements and automation to enhance team efficiency and data quality.

• Manage resource allocation and capacity planning for data engineering projects.

Data Sourcing and Collection:

• Oversee the identification and evaluation of source systems.

• Guide the team in gathering requirements on frequency, volume, and types of data.

• Ensure robust data privacy and compliance measures are in place, liaising with legal and compliance teams as necessary.

Data Ingestion and Architecture:

• Lead the design and implementation of scalable, efficient data ingestion pipelines using Informatica IDMC, Spark, and Python.

• Establish architectural standards for reliability and fault tolerance of ingestion pipelines.

• Oversee data transformation strategies during ingestion.

• Manage vendor relationships and collaborations for data ingestion projects.

Data Lake Management and Integration:

• Direct the structuring of data in the DataBricks Lakehouse to ensure optimal usability and performance.

• Oversee data partitioning, indexing, and archival strategies.

• Lead integration efforts with DataBricks Lakehouse, ensuring seamless accessibility for data scientists and analysts.

Data Quality, Validation, and Security:

• Establish comprehensive data quality frameworks and validation protocols.

• Implement and oversee security measures, including access controls, data encryption, and regular audits.

• Collaborate with compliance officers to ensure adherence to healthcare data regulations.

Performance Management and Optimization:

• Set and monitor KPIs for data ingestion pipeline performance.

• Lead optimization efforts to meet and exceed SLAs.

• Conduct regular performance reviews and implement improvement strategies.

Strategic Collaboration and Communication:

• Serve as the primary liaison between the data engineering team and other departments, including data science, business analytics, and IT.

• Present data engineering strategies, progress, and challenges to senior management.

• Foster a culture of knowledge sharing and continuous learning within the team.

Qualifications:

• 8+ years of experience in data engineering, with at least 3 years in a leadership role.

• Strong technical expertise in data engineering tools and technologies, including Informatica IDMC, Spark, Python, and DataBricks.

• Excellent communication and interpersonal skills, with the ability to influence and collaborate across all levels of the organization.

Nice to Have:

• Proven track record of successfully leading data engineering projects in a healthcare setting.

• Advanced knowledge of healthcare data standards, privacy regulations, and compliance requirements

Hitachi Asia Ltd., a subsidiary of Hitachi, Ltd., serves as the regional headquarters for seven countries across Southeast Asia (Indonesia, Malaysia, Myanmar, Philippines, Singapore, Thailand, and Vietnam). We are constantly increasing our presence through our forays in information & telecommunication systems, power systems, social infrastructure & industrial systems, electronic systems and equipment, construction machinery, high functional materials and components, automotive systems, and home appliances, among many more.

Position Overview:

We are seeking a highly motivated and skilled IT Infrastructure Engineer to join our team. The successful candidate will play a critical role in system implementation, ongoing maintenance, and support of existing systems, as well as providing proposals for new projects. This role will primarily serve a key customer, a prominent Japanese bank in Singapore.

Job Duties:

• System Implementation: Lead end-to-end system implementation projects, including planning, design, setup, testing, and system release.
• System Maintenance & Support: Provide troubleshooting and issue resolution for existing systems to ensure smooth operations.
• Project Proposal & Requirements Gathering: Collaborate with clients to understand requirements, evaluate solutions, and prepare detailed project proposals.

Key Qualifications:

• Education: Bachelor’s degree in computer science, IT Engineering, or a related field.
• Experience: - 8+ years in IT projects, particularly within banking or financial institutions. - 5+ years of hands-on experience in system infrastructure implementation. - 3+ years of experience working with major banks in Japan is highly preferred.
• Technical Expertise: Strong knowledge of system infrastructure, including Windows OS, Oracle Database, VMware, and other system operation products. Familiarity with JP1 or similar enterprise-level system operation tools. Proficient in programming and scripting languages (e.g., WinBatch, PowerShell).
• Language Proficiency: Advanced skills in listening, reading, writing, and speaking in both English and Japanese language to effectively communicate with clients and teams.
• Customer-Focused: Strong customer service orientation, with the ability to understand and address client needs effectively.
• Additional Skills: Ability to diagnose and resolve software-related issues in collaboration with product support teams. Strong communication and negotiation skills, with experience in working cross-functionally with internal and external IT teams.

JOB DESCRIPTION:

Role Purpose:-

The Project Engineer is tasked with planning and executing specific job tasks or work scopes on the FPSO project.

The complexity and scale of these scopes can be vary based on the Project Engineer's level of senority.

Key Accountabilities

Project managment:

• Assist the Area Manager in overseeing and managing the EPC scopes of the project. Resposibilies may include managing various work scopes or "mini-projects" within each phase to ensure the overall success and timely delivery of the project.
• Collaborate with multidisciplinary teams to ensure that project activities and deliverables are executed and delivered according to the schedule.

Project planning and monitoring:

• Create comprehensive plans and timelines for the different stages of the project, including contributions to the overall project schedule development.
• Monitoring the overall project schedule and its work scopes is crucial, including expediting: 1. Engineering progress and tracking the issuance of deliverables to support related functions such as procurement and construction. 2. Procurement activities and providing support for procurement processes, purchase orders, and package engineering. 3. The timely review of engineering for package engineering and monitoring the progress of key vendor date. 4. Construction activities and ensuring the on-time delivery of essential fabrication drawings and equipment by the required dates.

Technical knowledge

• Participate in design and technical reviews, as well as workshops, to develop action registers that monitor the implementation and closeout status.

Communication and stakholder management

• Notify other functions of potential delays abd develop plans to mitigate them.
• Regularly report on project status to the project management team and aid in producing progress reports for stakeholders.

JOB REQUIREMENT:

• Bachelor’s degree in Engineering or equaivalent technical discipline.
• At least 2-4 years of experience in Oil and Gas industry and/or in EPC projects or equivalent
• 4-10 years of experience in Oil and Gas industry.
• 4-10 years of experience in EPC projects or equivalent.
• Knowledge of project management principles.
• PMP certificate is desired
• Technical knowledge in FPSOs or other oil ad gas facilities.

Responsibilities:

• Design, develop, and test electronic circuits for embedded systems.
• Develop and debug embedded software using C/C++ or other relevant programming languages.
• Implement software solutions and design interfaces to support robot integrations
• Perform circuit simulations and PCB layout design.
• Optimize power consumption, performance, and reliability of embedded systems.
• Collaborate with cross-functional teams to define system requirements and specifications.
• Conduct design reviews, testing, and validation of hardware and software.
• Provide technical support and troubleshooting for product development and production teams.
• Assist robot field testing, evaluate the performance of our systems, and create performance reports.
• Contribute to overall architecture design and documentation.

Requirements:

Technical qualifications:

• Background in Computer Science/Electrical Engineering/Mechanical Engineering with focus in robotics, mechatronics, or related fields
• Proficient in ROS or C++ or Python and embedded programming
• Strong knowledge of robotic platforms, robotics hardware (sensors, actuators), and networks (Ethernet, Ethercat, CAN, Modbus, RS232, etc)
• Experience in circuit design, PCB layout, and debugging using tools like oscilloscopes, logic analyzers, and multimeters.
• Familiar with Linux platform, its configuration, and command line operations

Responsibilities:

• Design, develop, code, and document larger modules as part of firmware projects and lead a firmware project.
• Rich experience on embedded SoC software development and debug environment setup.
• Work with relevant architects, software and hardware teams to finalize the system level solutions and modularize the firmware development works.
• Utilize low level C coding techniques when developing codebases, follow coding standards and follow standard development best practices.
• Read schematics, utilize oscilloscopes, digital analyzers, and other test equipment in the development and debugging of firmware designs.
• Have fundamental knowledge about the operating system and its common drivers, especially understanding basics of RTOS.
• Have fundamental knowledge about inter-chip communications in heterogenous processor environment, and able to use OpenAMP or RPC such techniques.
• Understand storage devices/controller (i.e. SAS, SATA etc.) driver, protocols and firmware design is a plus.
• Understand power management at system level and OS power management handling is a plus, especially familiar with PMIC firmware.
• Understand the virtualization techniques on server environment is a plus.

Requirements:

• Minimum degree in Bachelors Engineering in Computer Science/Engineering, Electrical Engineering, related field or equivalent experience on embedded system.
• Minimum of 3-5 years of experience
• Experience with implementing embedded operating systems such as Linux, FreeRTOS on target hardware
• Demonstrated experience with C/C++/assembly language programming.
• Demonstrated experience with ability of problem analysis and solving.
• Familiar with RISC-V/ARM ISA is a plus.
• Good team player and be able to prioritize the tasks and delivery the modalized development work.

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

Summary:

• Basic up to 5k
• 5 days work week
• Location: Ang Mo Kio / Yio Chu Kang / Central
• Requires BCA in BIM Cert
• Must have experienced in ACMV & LTA/SMRT

Key Responsibilities:

• Develop and design mechanical systems (HVAC, plumbing, fire protection) in 3D using BIM software (Revit, AutoCAD, etc.)
• Prepare detailed mechanical design models, drawings, and specifications for commercial, residential, and industrial projects.
• Participate in design coordination meetings with architects, MEP engineers, and contractors to resolve clashes and ensure efficient project execution.
• Utilize BIM coordination tools like Navisworks to detect clashes and implement clash resolution processes for mechanical systems.
• Produce and maintain detailed documentation, including BIM execution plans, as-built drawings, and equipment schedules.
• Perform quality control checks on mechanical systems designs and ensure accurate implementation of BIM models in the construction phases.

Key Requirements:

• Min BCA in BIM Cert
• Min 2 years relevant working experience

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Joreen

WhatsApp me @ 8780 0117 for a prompt response to your enquiry!

Joreen Hung | Reg No.: R24119971

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Title: Marine Technical Engineer (ID8359)
Location: Bukit Batok, Singapore
Must have technical and operations knowledge on marine vessel operations & maintenance
Salary: $3400 - $5000

Job Description:
- Managing and Overseeing daily vessel operations, including movements, documents and risk management.
- Ensuring compliance for Port state.
- Handling and checking ship and cargo documents, including customs compliance for international shipment, raise purchase procurement and purchase order for vessel request maintenance and repair.
- Tracking and reviewing of approved purchase requisition for all vessel.
- Assisting relevant departments with claims such as demurrage, cargo shortage, and commercial.
- Submitting monthly statistical reports, including operating rate statistics, demurrage and voyage reporting.
- Improving ship efficiency and reduce operational risk
- Engaging and deploying sea staff for vessel assignments.
- Managing planned maintenance system (PMS) repairs and maintenance activities documentation and report filling into marine department archive.

Requirement:
- Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
- Knowledge of international maritime regulations and environmental standards.
- Minimum 3-5 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.
- Willingness to travel and work in challenging environments (e.g., shipyards or offshore).
- Proficient in English (Spoken and Written) & Microsoft Office.
- Team player and able to work within time constraints.
- Strong sense of integrity and professionalism.