Responsibilities

• Develop the next generation FPGA & SOC based artificial intelligent software Platform.
• Work closely with suppliers to support the FPGA/Linux software development in machine learning, computer vision, video coding and transmission and etc.
• Work together with advance solution team to deliver AI platform into different customer applications

Requirements

• Bachelor’s or Master’s Degree in Electrical Computer Engineering or Equivalent
• Minimum 3 years of hands-on experience with FPGA design, embedded Linux software development, or related
• Successful completed FPGA or embedded Linux designs from concept to production
• Familiar with common processor interfaces (PCI-Express, DDR3/4, I2C, SPI, RS232, MDIO, XAUI, MIPI, etc.)
• Experienced with Xilinx Vivado IDE including synthesis, simulation, place and route, timing closure
• Familiar with Vitis software platform is a plus
• Experienced with embedded Linux based BSP customization, software framework and application development
• Exposure to integration and debugging tools, such as oscilloscope, logic analyzers
• Able to work independently

Responsibilities

• Responsible for creating business opportunities with potential customers in ASEAN and ANZ region.
• Provides technical support to customers throughout the R&D cycle till completion.
• Drive design win and demand creation revenue for the company.

Requirements

• Degree/Diploma in Electronics or Electrical Engineering or equivalent
• Minimum 3 years of FAE working experience in a semiconductor distributor or manufacturer environment, or
• Working experience in a R&D position with strong knowledge in hardware design, analog and/or power application.
• RF & Microwave experience in Comms, Radar, Instrumentation, Defense etc. is a plus.
• Experience in PCB layout designs, schematic capture, routing rules, testing and debugging.
• Able to work independently and also contribute as a team player
• Strong communication and interpersonal skills
• Able to travel on short notice

Responsibilities

• Involve in the full cycle of development for reference board, modules and product solutions.
• Design, simulate, develop and test electronic modules & systems containing various interfaces, including microcontrollers, SOC, wireless, memory system, networking and power control sub system and etc.
• Generate documentations regarding concepts, specifications, schematics, test reports, verification report etc.
• Work as a team and coordinate closely with Software team, Marketing team and customers to deliver projects on time.

Requirements

• Degree in Engineering with minimum 3 years of experience in electronics hardware design, or minimum 10 years’ experience for senior role.
• Good knowledge in digital & analogue circuits, ultra-low power, audio system, power management, wireless & RF design, high speed computing technology etc.
• Experience on detailed electronics design, implementation & testing or complex PCBA designs, power integrity, signal integrity, design for test / manufacture & quality, wireless integration, etc.
• Strong hands on experience on hardware test, issue isolation, and debug
• Knowledge on test and support for product certifications
• Must be a good team player to work closely with software team.
• Initiative and willing to work in an energetic team

Responsibilities

• Responsible for Software Development.
• Involve in Feasibility Study, Design, Implementation, Testing, Maintenance and Customer Support.
• Study customer’s requirements, implement new specification, and develop new ideas for products improvement.
• Prepare technical design documents and software management by using source control tools.
• Work as a team and coordinate closely with Hardware, Marketing team and customers to deliver projects on time.

Requirements

• Degree in Engineering / Computer Engineering with min 3 years of experience in software development.
• Proficient in Python, Visual C++ program languages, and must have hands-on experiences
• Familiar with software interface to USB HID, Serial Port etc.
• Familiar with multiple structure software and state machine theory
• Knowledge on network protocol like TCP/IP, socket will be an advantage.
• Able to understand schematic and basic hardware knowledge
• An initiative worker and willing to work under stress
• Must be a good team player

The Testing and Certification Engineer for the Asia & Pacific Open Testing and Integration Centre (OTIC) in Singapore will be responsible for conducting testing with customers and testing tool providers, analyzing and evaluating testing results to certify O-RAN components.

Main Responsibilities:

• To work with the testbed System Architect, Technical Manager, and the other team members to configure and test a device-under-test (DUT) / system-under-test (SUT) of different customers.
• To understand the test specification and certification specified by standards bodies such as 3GPP, O-RAN, ETSI.
• To work with customers and testing tool vendors to configure and integrate DUT / SUT and the testing tools to achieve the testing / integration / certification objectives.
• To design, develop and deploy test cases to evaluate different O-RAN-based DUT / SUT.
• To participate in international organization discussion meetings (ORAN Alliance, TIP, MGMN), update the latest specifications defined by these standards bodies, and contribute to defining upcoming specifications/standards.
• To design, develop, and deploy test cases for manual and automation test scripts to evaluate different O-RAN-based DUT / SUT.
• To design detailed criteria and implement the procedures for each certification defined in standards.
• To analyze test results and assist customers in troubleshooting interoperability, security issues.
• To research 5G-related specifications and technologies for 3GPP and O-RAN.

Job Requirements:

• Bachelor or Master’s degree in computer science, computer engineering, communication engineering, or related fields.
• Hands-on experiences in Linux systems, virtualization/containers, edge/cloud systems deployment and management (e.g., Kubernetes).
• Good programming skills, e.g.: Python, shell scripting, C / C++.
• Hands-on experience and working knowledge of developing and deploying automation test tools (e.g., Jenkin). Experience with CI/CD is a plus.
• Hands-on experience and working knowledge in deploying and operating wireless networks (e.g., LTE, 5G networks).
• Familiar with 3GPP, ETSI standards, and O-RAN specifications is a plus.

Enabling Competencies:

• Analytical and problem-solving skills.
• Good interpersonal, communication and writing skills.
• Able to work independently and as a good team player.
• Adaptable and able to multi-task in a fast-paced environment.
• Ability to work under pressure.

Job Description & Requirements

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• To handle Tunnel Testing and Inspection activities.
• Tracking the movement of Tunnel Segmenrs by using the VMT Tracking System.
• Monitor the ring building activities prior to LTA submission and updating the ring building activities.
• Assist project teams in the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree in relevant discipline.
• Minimum 5 years of experience in procurement preferably construction/ civil engineering industry.
• Must be familiar with safety procedure within the site.
• Have experiences in working in large scale projects.
• Candidate with LTA and mrt tunnelling experience advantage.
• To be based in project site office.
• 6 Working Days per week.
• Working Location: Tampines.

Job Description & Requirements

Possess Diploma/ Degree in Civil/ Construction Technology

Supervise building construction works

Familiar with steel structure fabrication and erection

Familiar with construction site WSH rules and regulation

Able to communicate simple english

Possess Building Construction Supervisor Safety (BCSS) certificate is an advantage

Class 3 driving license will be an added advantage

Work at height supervisor (WAH) certificate preferred

Scissors lift/ boom lift certificate an advantage

Possess Diploma/ Degree in Civil/ Construction Technology

Supervise building construction works

Familiar with steel structure fabrication and erection

Familiar with construction site WSH rules and regulation

Able to communicate simple english

Possess Building Construction Supervisor Safety (BCSS) certificate is an advantage

Class 3 driving license will be an added advantage

Work at height supervisor (WAH) certificate preferred

Scissors lift/ boom lift certificate an advantage

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

Stand in rate to be discussed during interview.

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

• Together with the QP(S), provide overall team direction and management to realise the project objectives and activities as required by the Superintending Officer and consultants, ensuring that the project is delivered to the highest technical and safety standards
• Review Contractors’ proposal, method statements and designs
• To assist QP(S) and QP(Geo) in reviewing the construction proposals and implement supervision oversight of these construction works carried out by the Contractors
• Lead the RTOs to check all drawings (including shopdrawings, construction drawings) and specifications for discrepancies
• Overview of the quality system implementation, materials approval and compliance testing procedures
• To provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site
• Carry out any other duties related to the Project, including administrative tasks as directed by the CAG

Requirements

• The RE-Geotechnical shall have minimum five (5) years of relevant experience as a geotechnical engineer, of which at least three (3) years shall be in supervision of works in bored piling and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation
• The RE- Geotechnical shall possess a Geotechnical engineering degree recognised by the Professional Engineers Board of Singapore
• The RE- Geotechnical shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report

Duties & Responsibilities:

• Visit the precast fabrication yard min. twice a week during the duration of casting
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering degree recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Minimum 4 years of experience in concrete technology, inspection, quality control and quality assurance procedures related to production of high quality precast concrete products
• Accredited by JAC of IES/ACES as QSS

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical, D-wall and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

LEADING THE MARKET SINCE 1969

Founded in 1969, our company is a leading self-adhesive tape manufacturer, distributor, importer & exporter for a broad spectrum of quality self-adhesive tapes and packaging products / materials.

Our rich history and active presence in the industry has brought about high brands and product recognition by industry leaders. Our excellent track record for efficient and reliable sevices backed by high manufacturing standards have enabled us to be the leading choice for packaging solutions.

We are currently hiring and looking for a resourceful and highly motivated individual to join our expanding Marketing teams as:

Purchasing Assistant

• "O" Level with at least 2 years of working experience
• Competent in Microsoft Excel and Words
• Able to communicate in English and Mandarin to liaise with English / Chinese speaking associates
• Prefer staff who stay in Ang Mo Kio or East area
• Navision knowledge will be an added advantage
• Any other work assigned by supervisor

Responsibilities:

• Responsible for successful delivery of assigned projects.
• Manage the site project team and facilitate their ability to complete the project on time.
• Supervise workers and sub-contractors to ensure works are carried out as per schedule and in good quality.
• Project Management to achieve smooth project implementation and completion.
• Project Costing and re-engineering to increase project profit margin, preparation of monthly progress claim and expenditure budget control.
• Leading Testing and Commissioning of project team and conduct training to customers after completion of project.
• Provide technical support to customers and site project team in the selection of equipment for the project.
• Involve in technical discussion, progress meeting with client, M& E consultant and main or sub-contractors.
• Assist the Safety Coordinator / Safety Officer In charge of the Project Safety System planning, assessment and implementation.
• Performs other duties as assigned.

Requirements:

• Related Academic Achievements in Engineering (Electrical) or Building Services
• Min. 2 years relevant experience at local construction site.
• Strong project management experience in related Electrical Installation projects (especially on turnkey and A&A works) with strong technical knowledge and site experience.
• Able to communicate effectively with all levels of people and possess strong leadership quality and high initiative character.
• Able to communicate well in English and Mandarin.
• Proficiency in Microsoft Office and Project softwares including good knowledge in AutoCad/Revit
• Motivated, responsible with positive attitude and able to work under pressure and stress.
• This position requires the successful candidate to be onsite mostly.
• This position requires the successful candidate to work during after office hours sometimes due to project schedule.

InfoCepts is a global leader of end-to-end data & analytics solutions with nearly 20 years of experience, also named as Gartner’s 2020, 2021 and 2022 customers’ choice for Data & Analytics providers. We continue to grow rapidly year over year, now employing more than 1,200 people in offices across the globe. As we have grown, we have stayed true to our mission—to always help our customers stay modern that help them make smart, data-driven decisions. Since 2004, we have deployed hundreds of high performance analytics applications over web and mobile platforms, built several advanced analytics models, processed petabytes of data using Big Data technologies and delivered several high impact business solutions. Driven by our vision of delivering great customer experiences, we are looking for professionals who are passionate about making the world a better place by leveraging the power of data.

We are hiring aspiring / proven data engineers to join us. We provide extensive training, bootcamps/on-the-job to prepare qualified candidates for an exciting career in Data Analytics in Government and Public Sector.

What is a Data Engineer?

The role of a data engineer can be defined as someone who has the knowledge and skills to design and build systems for collecting, storing and analyzing data at scale.

Roles and Responsibilities:

• Work closely with the project team to develop and validate ETL workflow and packages in Informatica / Talend
• Drive the maintenance of data engineering pipelines
• Implement data engineering pipelines as per business needs and technical specifications provided by stakeholders and work closely with the data engineering team to ETL the required data from source systems into datastore
• Develop ETL jobs i.e. workflow packages, auto schedulers, in Informatica PowerCenter as per specifications and requirements
• Monitor and ensure ETL jobs are successfully executed and handle troubleshooting of any related technical problems on-site

Skills Required:

A successful data engineer needs to have a combination of technical as well leadership skills. A background in Mathematics, Statistics, Computer Science, Information Management can serve as a solid foundation to build your career as a data engineer.

• 1 to 2 years of ETL experience
• Strong proficiency in Python and SQL scripting skills
• Proven experience in Informatica PowerCenter in a similar capacity
• Prior experience with ETL operations using at least one other ETL - Informatica and/or Talend
• Knowledge of creating ETL packages and configuring workflows
• Knowledge of at least one database tool such as MySQL, MS SQL and/or PostgreSQL
• Adept at queries with good communication and stakeholder management skill