Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Responsibilities

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Key Responsibilities:

• Provide remote and on-site technical support, including but not limited to, Incident Management and Problem Management

• Escalate incidents, problems, changes to Team Lead, Service Delivery Manager, Account Manager or vendors as per defined business rules, ensuring timely resolution of client service requests

• Liaise with vendors needed to achieve incident and problem resolution.

• Maintain detailed knowledge of clients’ environments, where applicable, by maintaining and updating relevant documentation.

• Provide high levels of customer service and resolving problems/issues with the client in a constructive manner.

• Prepare adhoc reports as required for contractual requirements.

• Contribute to ITIL based processes to ensure successful delivery of services and initiate solutions to improve quality and productivity

• Participate in client presentations when necessary

Job Requirements:

• CCNP or CCIE in Enterprise is required

• Hands-on experience in installation, configuration and troubleshooting of Cisco routers, wireless or switches

• Have some working knowledge of Cisco Routers, Switches, SD-WAN, DNA, Wireless products in addition to Meraki Switch, Router, Wireless products

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• At least 3 years of experience in a technical support environment working with Cisco products

• Experience with VMWare NSX and VMWare Load balancers, is an added advantage

• Knowledge of Aruba, Bluecoat, Ironport, F5, Checkpoint, Fortigate or Juniper products is also preferred

• Able to work in a 24x7 and team environment

Jason Energy Pte Ltd, a wholly owned subsidiary of Jason Marine Group Limited has significant experience in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised Telecommunication System Integrator in the oil and gas global market, we provide turnkey project systems that covers a full spectrum of services from the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

We are looking for a Project Engineer to prepare, schedule, coordinate and monitor the projects that are being assigned to him/ her. Reporting to the Project Manager in the Project Team, he/ she will

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements:

• Diploma or Degree in Engineering or relevant field
• Proven working experiences as a project engineer
• Project management and organizational skills
• Commitment to exceeding customer’s expectations
• Time management and organization skills

Good to Have

• MS Office Skills
• Microsoft Project Skill
• Dynamic Business Central knowledge will be an advantage
• Negotiation skills

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

About the team:

The Enterprise Technology team is a diverse and collaborative group of professionals responsible for driving the technological advancements within GXS Bank. We work on cutting-edge projects that aim to enhance the bank's infrastructure, security, and operational efficiency. Our team is at the forefront of innovation, leveraging the latest technologies such as cloud computing, artificial intelligence, and data analytics to deliver exceptional solutions.

About the Role:

The End-User Computing (EUC) Specialist/Engineer will be responsible for managing and supporting the endpoint devices used by GXS Bank employees. This includes desktops, laptops, mobile devices, and peripherals. The role involves ensuring the reliability, security, and optimal performance of these devices, addressing technical issues, and implementing best practices for endpoint management.

Key Responsibilities:

1. Endpoint Device Management

• Oversee the deployment, configuration, and management of endpoint devices (desktops, laptops, mobile devices, etc.).
• Manage and maintain device lifecycle, including procurement, setup, patch management, and decommissioning.
• Ensure devices are compliant with security policies and regulations.

2. Technical Support and Troubleshooting

• Provide first and second-level technical support for endpoint devices.
• Diagnose and resolve hardware and software issues, including connectivity, performance, and application problems.
• Escalate complex issues to higher-level support or external vendors as necessary.

3. Software and Patch Management

• Deploy and manage software applications and updates across endpoint devices.
• Implement and monitor patch management processes to ensure devices are up-to-date and secure.
• Utilize endpoint management tools (e.g., Jumpcloud, Automox, Microsoft Endpoint Manager, SCCM, Intune) for software distribution and compliance monitoring.

4. Security and Compliance

• Implement and enforce security measures, including antivirus software, encryption, and endpoint protection solutions.
• Conduct regular security audits and vulnerability assessments on endpoint devices.
• Ensure compliance with internal security policies and external regulations (e.g., MAS, NIST, CIS).

5. User Training and Documentation

• Create and maintain documentation for device configurations, troubleshooting procedures, and best practices.
• Conduct training sessions for end-users to enhance their understanding and effective use of endpoint devices.
• Develop FAQs and knowledge base articles to support self-service and reduce sup
• port requests.

6. Performance Monitoring and Reporting

• Monitor endpoint device performance and usage metrics to identify trends and potential issues.
• Generate regular reports on device health, support ticket resolution times, and user satisfaction.
• Provide recommendations for system improvements based on performance data.

7. Collaboration and Communication

• Work closely with other IT team members, business units, and external vendors to ensure cohesive support and implementation of endpoint management solutions.
• Communicate effectively with stakeholders to understand their needs and address technical concerns.
• Participate in regular team meetings and contribute to strategic planning for IT services.

Qualifications:

Education: Diploma/bachelor’s degree in computer science, Information Technology, or a related field.

Experience:

• Minimum of 3 years of experience in IT support or endpoint management.
• Hands-on experience with endpoint management tools (e.g., Automox, SCCM, Intune, Jumpcloud).

Technical Skills:

• Proficiency in troubleshooting and resolving hardware and software issues on endpoint devices.
• Knowledge of endpoint management tools for software deployment, patch management, and compliance monitoring.
• Familiarity with scripting languages (e.g., PowerShell, Python) for automation tasks.
• Understanding of IT security practices and endpoint protection solutions.
• Experience with mobile device management (MDM) solutions.

Soft Skills:

• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Customer-focused mindset with a commitment to delivering high-quality support.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Engineer will work closely with the Principal Investigator on several research projects on using machine learning in chemical and optimization problems
• The Research Engineer will help to develop machine learning models for both theory and applications in advanced control systems

Job Requirements

• B.S. or M.S degree in a relevant area, e.g., Chemical Engineering, Control Engineering, Computer Science, Chemistry, etc.
• Experienced in machine learning, optimization and programming languages (e.g., python, Matlab, C++, etc)
• Any experience with 1) advanced control, 2) machine learning theory and applications, and 3) chemical engineering and chemistry is a plus

Job Summary:

We are seeking a highly skilled and motivated medical device Product Development Engineer to join our dynamic team. The successful candidate will be responsible for the design, development, and maintenance of software products that meet regulatory requirements for medical devices. This role requires a good understanding of both software engineering and medical device regulations, ensuring our products are safe, effective, and compliant.

Key Responsibilities:

• Collaborate with software development team to design, develop, and maintain software applications intended for use as medical devices.
• Collaborate with cross-functional teams, including clinical, regulatory, quality, and marketing to implement product requirements and specifications.
• Ensure software design complies with relevant medical device regulations and standards (e.g., IEC 62304, ISO 13485, HSA guidelines).
• Work closely with regulatory affairs to ensure software products meet all necessary regulatory requirements and obtain required certifications and approvals.
• Prepare and maintain documentation required for regulatory submissions and audits.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software development, preferably in the medical device industry.
• Experience with regulatory compliance for medical devices.
• Familiarity with software validation and verification processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Position : Project Engineer (A&A Construction) - Up to $6,500 + Bonus
• Office Location : East - Aljunied
• Working hours : 5.5 days - Monday to Friday | 8am to 6pm | Saturday 8am to 12pm
• Salary (commensurate with experience) : Up to $6,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Building Construction

Main Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Organize labor, equipment and material for day to day site activities
• Carry out material receiving inspection and maintaining material record.
• Prepare daily and monthly progress report, perform and maintain inspection record.
• Any other duties assigned

Requirements:

• Minimum of Degree in Architectural/ Building / Construction Management or related; with at least 3-5 years of experience.
• Great team player with pro-active attitude.
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Technical Support Engineer (Automation Products) – Up to $4,500 + AWS
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Provide pre-sales support and post sales application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Support technical requests/support, respond to customer queries and issues of our customers over telephone or email.
• Documentation and recording of all service, support and application activities
• Conduct product training and demonstration to customers
• Work closely with sales team to maintain existing customers’ relationship.
• Using product application knowledge to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Build up relationship with our product's principal and provide customers’ feedback to product's principal for service and/or products enhancements.
• Value-add to customers’ needs and strengthen relationships with them.

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Service Technician or Engineer-HVAC/ACMV
• Working hours : Monday to Friday | 8.30am to 5.30pm
• Location: Office in Boon Lay-Islandwide
• Salary (commensurate with experience) : Up to $4200 Basic + $50 Transport allowance + $50 mobile + Minimum 2 months Variable Bonus (max up to 5 MONTHS BONUS) + 16 days Annual Leaves + Medical Benefits + Overtime
• Duration : Permanent
• Industry : Refrigerating, Air-conditioning & Ventilation Machinery - MNC

Main responsibilities :

• Able to carry out corrective and preventive maintenance for chillers and related equipment
• To perform chiller overhaul – dismantle & re-assemble the major components
• Coordination with vendors and contractors, ensure all works carried out in accordance with specified quality and EHS standards
• Liaising with customers to resolve the chillers issues
• May be assigned to lead a team of technicians to fulfill jobs assigned – for engineer
• Assist or involve in schedule planning & prepare works related reports – for engineer
• Any other duties as deemed necessary from times to times

Requirement:

• ITE / Diploma in Mechanical, Electrical, Electronic Engineering or equivalent
• Min 2-5 years of relevant experience in Machinery overhaul
• Willing to performing physical activities, such as climbing, lifting, balancing, walking, stooping, and handling of materials.

Email to [email protected]

Do visit Search Personnel Pte Ltd for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior / Associate Engineer to be part of our Thin Film diverse team of talent. You will support the running of Production and ensure equipment readiness and worthiness for production.

What you will be working on:

• To assist Thin Film equipment engineers to sustain equipment performance and perform schedule & adhoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assist new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment.
• Some knowledge in Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Position : Service Engineer/Manager-Chillers/HVAC/ACMV
• Working hours : Monday to Friday | 8.30am to 5.30pm, Saturday half day 8.30am-12.30pm (on standby when required only)
• Location: Tuas
• Salary (commensurate with experience) : Up to $5000 Basic + Petrol reimbursement up to $400 per month, + Transport allowance/reimbursement + Bonus + Medical Benefits
• Duration : Permanent
• Industry : Heat Exchange Equipment

Main responsibilities :

• Perform servicing and maintenance on chiller
• To perform chiller overhaul – dismantle & re-assemble the major components
• Coordination with vendors and contractors, ensure all works carried out in accordance with specified quality and EHS standards
• Liaising with customers to resolve the chillers issues
• May be assigned to lead a team of technicians to fulfill jobs assigned – for engineer
• Assist or involve in schedule planning & prepare works related reports – for engineer
• Any other duties as deemed necessary from times to times

Requirement:

• ITE / Diploma in Mechanical, Electrical, Electronic Engineering or equivalent
• Min 2-5 years of relevant experience in Machinery overhaul
• Able to Perform servicing and maintenance on chiller
• Able to Repair and troubleshooting on chiller will be an advantage

Email to [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Summary:
We are seeking an experienced Software Testing Engineer to join our dynamic team focused on developing cutting-edge medical device software. The successful candidate will be responsible for designing, executing, and maintaining comprehensive testing processes to ensure our software meets the highest standards of quality, safety, and regulatory compliance. This role requires a deep understanding of software testing and compliance.

Key Responsibilities:

• Design, develop, and execute test plans, test cases, and test scripts for software applications intended for use as medical devices.
• Collaborate with software developers and cross-functional teams to identify, document, and resolve software defects.
• Conduct various types of testing, including functional, integration, system, performance, and regression testing, to ensure software quality.
• Prepare and maintain comprehensive testing documentation, including test protocols, validation reports, and traceability matrices, required for regulatory submissions and audits.
• Work closely with quality assurance and regulatory teams to ensure software testing aligns with industry best practices and regulatory requirements.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software testing, preferably in the medical device industry.
• Knowledge of software testing tools and frameworks (e.g., Selenium, JUnit, or similar).
• Strong analytical skills with excellent attention to detail.
• Effective communication and teamwork abilities.
• Experience with regulatory compliance and documentation for medical devices will be an advantage but not mandatory.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

The Job

• Develop timing/power/noise characterization flow for advanced node memory compiler.
• Strong focus on design automation for SRAM compiler, big data analysis and design verification.
• Develop memory analysis flow for PPA check.
• Design and develop the layout for integrated circuits according to electronics engineering principles, using software to create design schematics and diagrams.

The Talent

• Bachelor's Degree (with min. 8 years of relevant industry experience) /Masters Degree (with min. 6 years of relevant industry experience)/ PhD in Electrical and Electronic Engineering/Computer Engineering/Computer Science.
• Knowledge of SRAM/ROM memory functionality and high speed, low power memory design architecture.
• Experience in spice simulation and understand CMOS layout view, Verilog coding is preferable.
• Proficient in script programming with Perl or Python3.

• Position : Sales Engineer -Chillers/Heat Exchange
• Working hours : Monday to Friday | 8.30am to 5.30pm
• Location: Tuas
• Salary (commensurate with experience) : Up to $4200 Basic + Petrol reimbursement up to $400 per month, + Transport allowance/reimbursement + Bonus + Medical Benefits
• Duration : Permanent
• Industry : Heat Exchange Equipment

Main responsibilities :

• Submit plan and execute well-defined sales strategies to achieve targets
• Develop and maintain good rapport with existing customers;
• Promptly and professionally attend to customers’ enquiries and requests and provide technical advise on both existing and new products or systems;
• Supports sales opportunities through presentations, calling and visiting customers and prospects, needs identification with active follow-ups;
• Ensuring smooth service operation efficiency for customers with sales and operations team
• Investigating and resolving customers’ issues with relevant departments when necessary
• Acquire new customer accounts;
• Assist in preparation of proposals and quotation administration;
• Contribute creative alternative ideas to help maximize sales opportunities;
• Participate in marketing, advertising, promotional and publicity activities in line with corporate and product strategies;
• Gather information on market demand, competition and latest product developments
• Conduct periodic sales forecasts;
• Prepare weekly sales/contact reports.

Requirements:

• Diploma/Degree in Mechanical/Marine Engineering;
• Experience in Sales preferred but fresh graduates are welcome to apply as full training is provided
• Possess Class 3 driving license (with own transport preferred)
• Resourceful, proactive self-starter, positive attitude, performance oriented, able to work independently but also a team player;
  Must be able to read and write fluently in English
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Engineer will work closely with the Principal Investigator on several research projects on using machine learning in chemical and optimization problems
• The Research Engineer will help to develop machine learning models for both theory and applications in advanced control systems

Job Requirements

• B.S. or M.S degree in a relevant area, e.g., Chemical Engineering, Control Engineering, Computer Science, Chemistry, etc.
• Experienced in machine learning, optimization and programming languages (e.g., python, Matlab, C++, etc)
• Any experience with 1) advanced control, 2) machine learning theory and applications, and 3) chemical engineering and chemistry is a plus

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Engineer will work closely with the Principal Investigator on several research projects on using machine learning in chemical and optimization problems
• The Research Engineer will help to develop machine learning models for both theory and applications in advanced control systems

Job Requirements

• B.S. or M.S degree in a relevant area, e.g., Chemical Engineering, Control Engineering, Computer Science, Chemistry, etc.
• Experienced in machine learning, optimization and programming languages (e.g., python, Matlab, C++, etc)
• Any experience with 1) advanced control, 2) machine learning theory and applications, and 3) chemical engineering and chemistry is a plus

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Essential Duties and Responsibilities

• Responsible for software development lifecycle activities, including system study, analysis, design, code, test, and deployment for product using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS
• Work with project team members to identify product requirements and help define project scope, objectives, and plans accordingly
• Write, analyze, optimize, and debug product application code to maximize performance and quality
• Create automated unit tests and integration tests
• Write and maintain the internal tools to diagnose software component issues, improve productivity of build and release
• Document technical specifications and functional specifications
• Participate in agile planning and scope estimation for team projects
• Mentor and execute in Agile, Lean, and Continuous Delivery best practices

Requirements

• BS/MS in Computer Science/Engineering or related field
• 5+ years of software development experience in user interface application development using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS
• Experience in turning designs into responsive UIs with ReactJS /HTML5 / CSS (LESS)
• Experience in leveraging development workflow with tools like npm, webpack and Node.js
• Experience developing in Node.js development
• Experience with design patterns, performance/memory analysis, multithreading
• Agile / Scrum experience including TDD, unit testing, and continuous integration
• Strong analysis and problem-solving skills
• Excellent interpersonal skills including verbal and written communication skill
• Communicates well in English

Bonus

• Experience in WPF/WCF and MVVM programming
• Experience on creating webview2 UWP apps
• Experience in integrating with RESTful APIs