The PTO Lead Process Engineer leads new product introductions and the transfer of drug products to other facilities of moderate/high complexity independently and is a coach for his/her colleagues on the commercialization and manufacture of all drug products. He/ she typically will assume the responsibilities of a technical product steward and leads/supports all technical/ process activities (for example) investigations, validation and qualification processes, risk assessments and process safety management activities under his/ her responsibilities. The PTO Lead Process Engineer also leads/supports continuous process improvement activities to enhance site performance metrics and provides advanced/expert knowledge to the site and across our global technical network (while leveraging on other site experiences / knowledge) and continuously expands on personal expertise. He/ she will also provide technical supply support independently. The PTO Lead Process Engineer is expected to possess advanced/expert knowledge of at least one process/platform technology and supports the objectives of his/her seniors and the direct supervisor.

WHAT YOU WILL DO

MAIN RESPONSBILITIES

• Leads new product introductions to the site by conducting process and equipment comparisons, new raw materials introduction, development studies, clinical supplies manufacturing, cleaning processes development/ validation and training of technicians as required. Identifies and implements strategies for PPQ matrixing, novel technologies and new products etc. Authors PPQ protocols, reports and other associated documentation related to a new product introduction. Expected to have an advanced knowledge of product development, scale-up and technical transfer, key supporting documentation and associated regulatory requirements. Anticipates and remediates quality issues and challenges from the technology transfer process. Demonstrates advanced knowledge in technical writing for investigations, change request, PPQ reports and CMC sections.
• Leads and/or supports the design and execution of small/ full scale experiments using appropriate methodology and/or simulations for products/ processes to evaluate the impact of proposed changes to validated equipment/ processes.
• Proactively identify solutions independently to address issues that arose during experiment/ evaluation
• Leads/ provides technical guidance in support of site and divisional capital projects and new facility start-up activities. Ensures that the process design is well thought-out and robust for routine manufacturing. Provide technical input independently to the process design to ensure its fit for purpose for routine manufacturing. Responsible to transfer the knowledge of the project and facility to IPT colleagues.
• Provides technical expertise related to the product, equipment and manufacturing/cleaning processes in response to deviations/ product complaints/ adverse events to identify point of occurrence, root cause and corrective/ preventative actions. Demonstrates ability to lead and resolve complex technical issues and investigations and resolve with minimal supervision.
• Provides technical expertise for compliance activities such as audit and regulatory support. Acts as primary regulatory representative with business partners and regulatory agencies for moderately complex products/ programs/ issues.
• Manages product portfolio activities and is expected to manage a project team for activities associated with the product portfolio. Examples (but not limited to) include managing documentation updates (e.g. SOPs, batchsheets, recipes), quality risk assessments, change control management/ filing support (if applicable) and validation activities such as equipment qualification, simple process validation and cleaning validation/monitoring activities. Expected to have an advanced knowledge of respective compliance topics related to the above-mentioned activities. Demonstrates good project management skills (e.g. define core team and activities, project scheduling, stakeholder management and issues escalation etc), and demonstrates the ability to manage/ influence the project team.
• Supports routine supply manufacture by providing on going technical support to the IPT, participates in Tier processes and implements opportunities for improvement utilizing MPS (Our Production Systems) tools. Ensures optimum production runs, identifies constraints and non-conformances and troubleshoots to resolve complex issues in production systems. In addition, conceptualizes process designs to troubleshoot and resolve complex operational or manufacturing issues and recommend enhancements to improve production runs and enable the continuously improvement of the product cost structure.
• Manages and performs the proactive monitoring of the performance of process parameters, critical quality attributes and equipment/module(s)/unit operation(s) performance during manufacturing and cleaning. This could involve leading/participating in Prospective Process Analysis (PPA), statistical analysis and response to shifts and trends in process performance. Undertakes responsibilities as an active site product steward and is a member of the Value Chain Technical Team where applicable.
• In addition, leads Continued Process Verification and participates in Annual Product review activities as part of product lifecycle management. Applies moderately complex statistical and risk analysis tools to evaluate actions required to ensure product robustness across applicable manufacturing equipment and processes.
• Demonstrates advanced understanding of product CPP, CQA, Cpk and sterile boundary of the current validated processes. Has good knowledge of the raw materials and PCC (product contact components) used for the products under his/her responsibility.
• Actively participates and shows commitment to collaboration and sharing of best practices across the global S&T network. Typically possesses advanced and/or expert knowledge in at least one platform technology/ process.
• Complies with all divisional and site-specific policies, guidelines and procedures.
• Demonstrates and promotes Environmental, Health & Safety (EHS) leadership behaviors, ensuring that all activities are carried out in accordance with EHS requirements. Actively participates in GEMBA safety walks. Leads/ participates process hazards analyses (PHA) and applicable Process Safety Management (PSM) activities related to new/inline products.
• Where applicable, develops SOPs, gap analyses and procedures for Quality/EHS subsystems/ topics in compliance with regulatory requirements, divisional and corporate policies and guidelines. Typically possesses advanced and/or expert knowledge in at least one compliance topic.
• Demonstrates leadership behaviors in alignment with our leadership standards (Individual Contributor). Practices Inclusion as the How.
• Leads personal career development with manager assistance through annual Performance Management Process (PMP), Employee Development Plan (EDP) and career mapping.
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

Qualification:

• Bachelor's degree in a technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences

Experience:

• Minimum 5 to 10 years technical experience in related pharmaceutical manufacturing industry.
• Demonstrated capability to successfully lead teams in complex projects.
• Expert knowledge of core technology/unit operations relevant to active pharmaceutical ingredient, Biotech and/or Non-Sterile manufacturing.

Leadership, Professional and Functional Competencies

• Demonstrate leadership skills in alignment with our Leadership Standards, focusing on build talent, fostering collaboration and drive results.
• Effective communication skills, both oral and written. Ability to work effectively on cross- functional teams as a leader or a core member.
• Strong Leadership capabilities, with desire for active people development in the organization.

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24110

• We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.
• In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes

What will you do?

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.
• Strong analytical and problem-solving abilities.
• Excellent communication skills, both verbal and written.
• Ability to work collaboratively in a fast-paced, agile environment.
• Leadership qualities with the ability to mentor and guide team members.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

• We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.
• In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes

What will you do?

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.
• Strong analytical and problem-solving abilities.
• Excellent communication skills, both verbal and written.
• Ability to work collaboratively in a fast-paced, agile environment.
• Leadership qualities with the ability to mentor and guide team members.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Job Description:

· Designs jigs and fixtures as the case may be

· Design for fabrication/ Assembly/ Maintenance

· Research and Development of current or New Products

· Generates manufacturing drawings in accordance with applicable standards Interfaces with customers for technical discussion

· Research and analyse customer design proposals, specifications and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications.

· Specify system components to ensure conformance with engineering design and performance specifications

· Understand the design requirements and create the conceptual design/mechanism for the heavy trucks.

· Generate detailed engineering drawings of the design and prepare the Bill of materials.

· Responsible for the preparation of the manufacturing drawings of the detailed design.

· Conduct Finite Element analysis and kinematics & Dynamics analysis to improve the design performance.

· Engage with the manufacturing team during design stage and manufacturing stage to ensure the smooth transition from design to manufacturing.

Qualifications & Requirements:

· Candidate must possess Bachelor’s/Master’s degree in Mechanical Engineering and related courses.

· Minimum 1-2 years of experience in Mechanical design or Machine design is required for this position.

· In depth knowledge in CAD/CAE applications such as SOLIDWORKS, CREO, Inventor and Unigraphics etc.

· Ability to work in the fast paced environment and work independently.

· Strong mechanical engineering knowledge and fundamentals including design principles, machine elements, and fabrication methods.

Responsibilities

• To ensure smooth operation of site activities.
• To Provide logistical support (site utilisation) when needed, as requested by sub-contractors.
• To be the liaison for the coordination of different trades within the same discipline.
• Responsible for all on-site engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients queries to ensure timely work arrangements.
• Involve in day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and local authorities’ quality standard.
• Manage project documentation and maintain accurate records.
• Ensure compliance with all health and safety regulations.

Qualifications

• Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification.
• Experience/Knowledge in in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA is an advantage.
• Availability for Night Shifts: Candidates must be able to work during night shifts.
• More than 3-years of site experience in Construction sector, preferably in superstructure crosshead/ precast segmental bridge and Launching Gantry operation or similar.
• Good team player and able to work independently
• BCSS Certificate
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Location: Teban Gardens West Region

Job Description & Requirements

Job Description (Key Responsibilities):

Key responsibilities for this role include, but not limited to, the management of design, budget, schedules, quality and personnel, as Client’s integrated project execution team - working primarily at the project site.

Other responsibilities:

• To assist the Project Manager(s) in day-today management of the contract;
• To advise the PM(s) on site quality and safety issues;
• To determine any non-conformances on works;
• To liaise with the Contractor to rectify any non-conformances and document them properly;
• To ensure that decisions on site issues are conveyed to the Contractor within a reasonable timeframe;
• To ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety;
• To provide feedback to the PM(s) on quality and safety matters and suggests quality improvement measures for implementation on site;
• To supervise the installation of instrumentation and monitoring of instrumentation;
• To lead a team of supervisors to ensure full time supervision of works on site
• To assist in the operating of the PMCC
• Other duties as and when assigned

Job Requirements & Person Specification (Qualifications, Experience, Skills & Behaviours)

• Degree in Civil & Structural (C&S) Engineering / Construction Management (Preferable from government university in Malaysia for Malaysia candidate)
• Relevant experience in a C&S, geotechnical, tunnel, or viaduct project / construction environment
• Proficiency in relevant software programmes for planning and project work is advantageous
• Experience with C&S, geotechnical, tunnel, or viaduct design would be an advantage
• Strong analytical and communication skills
• Any offer of employment for the role of Project Engineer is also subject to approval from our client for you to commence work on their project

About Asia Infrastructure Solutions:

Asia Infrastructure Solutions is a leader in delivering project & programme management, cost management, sustainable design, engineering, business advisory and consultancy solutions for the infrastructure, buildings, and environmental sectors. The company was established by Global Infrastructure Solutions Inc. (GISI), the largest privately owned construction manager in the commercial building, industrial and healthcare markets, and a leading project / construction manager in the environmental and public infrastructure sectors. GISI and its founding members have over 90 years of project experience in Asia and currently employs 12,500 employees globally, operating in more than 90 countries.

Asia Infrastructure Solutions has a strong and diversified team of project managers, construction managers, programme managers, cost managers, sustainability consultants and various disciplines of engineering professionals with a long track record in the infrastructure, building and environmental sectors delivering the future for the built and natural environment. Our professional and technical expertise and capabilities are inherited from the Arcadis Design & Engineering / Hyder / Freeman Fox in Hong Kong and Arcadis Consulting / EC Harris / Davis Langdon & Seah businesses in Singapore which span many decades in the Asia region.

Notable projects in Singapore include the Jewel at Changi, CapitaSpring, the North-South Corridor, various hotels, data centers and corporate headquarters for the world’s leading MNCs to name a few.

We empower our employees to succeed and we invest in their professional growth through learning & development programmes as well as membership of professional bodies. Our employees also receive a range of benefits that includes opportunities for hybrid/flexible working, a share-ownership scheme, and private healthcare coverage.

Asia Infrastructure Solutions . Delivering the Future . AsiaInfraSolutions.com

Fair recruitment practices:

Asia Infrastructure Solutions adheres to the Tripartite Standards for Recruitment Practices in Singapore and uses fair, merit-based, and inclusive hiring practices.

Employment agencies:

Candidates referred by employment agencies will not be considered unless the agency has been explicitly instructed to provide candidates for the stated role.

Job Description (Key Responsibilities):

Key responsibilities for this role include, but not limited to, the management of design, budget, schedules, quality and personnel, as Client’s integrated project execution team for a Land Transport Authority (LTA) project.

Other responsibilities:

• To perform day-today management of an LTA construction project;
• To oversee site quality and safety issues;
• To determine any non-conformances on works;
• To liaise with the Contractor to rectify any non-conformances and document them properly;
• To ensure that decisions on site issues are conveyed to the Contractor within a reasonable timeframe;
• To ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety;
• To manage quality and safety matters and suggest quality improvement measures for implementation on site;
• To supervise the installation of instrumentation and monitoring of instrumentation;
• To lead a team of supervisors to ensure full time supervision of works on site
• To assist in the operating of the PMCC
• Other duties as and when assigned

Job Requirements & Person Specification (Qualifications, Experience, Skills & Behaviours)

• Minimum Degree in Civil & Structural Engineering / Construction Management
• For Senior Engineers at least 5 years' relevant experience in a project / construction environment including but not limited to transport / tunnelling / underground structures.
• For Project Engineers at least 2 years’ relevant experience. Fresh graduates can be considered on case-by-case basis.
• Previous experience of working on Land Transport Authority (LTA) projects in Singapore will be an advantage.
• Proficiency in relevant software programmes for planning and project work is advantageous.
• Experience in C&S, geotechnical tunnel or viaduct design will also be an advantage.
• Strong leadership qualities with good analytical and communication skills

About Asia Infrastructure Solutions:

Asia Infrastructure Solutions is a leader in delivering project & programme management, cost management, sustainable design, engineering, business advisory and consultancy solutions for the infrastructure, buildings, and environmental sectors. The company was established by Global Infrastructure Solutions Inc. (GISI), the largest privately owned construction manager in the commercial building, industrial and healthcare markets, and a leading project / construction manager in the environmental and public infrastructure sectors. GISI and its founding members have over 90 years of project experience in Asia and currently employs 12,500 employees globally, operating in more than 90 countries.

Asia Infrastructure Solutions has a strong and diversified team of project managers, construction managers, programme managers, cost managers, sustainability consultants and various disciplines of engineering professionals with a long track record in the infrastructure, building and environmental sectors delivering the future for the built and natural environment. Our professional and technical expertise and capabilities are inherited from the Arcadis Design & Engineering / Hyder / Freeman Fox in Hong Kong and Arcadis Consulting / EC Harris / Davis Langdon & Seah businesses in Singapore which span many decades in the Asia region.

Notable projects in Singapore include the Jewel at Changi, CapitaSpring, the North-South Corridor, various hotels, data centers and corporate headquarters for the world’s leading MNCs to name a few.

We empower our employees to succeed and we invest in their professional growth through learning & development programmes as well as membership of professional bodies. Our employees also receive a range of benefits that includes opportunities for hybrid/flexible working, a share-ownership scheme, and private healthcare coverage.

Asia Infrastructure Solutions . Delivering the Future . AsiaInfraSolutions.com

Fair recruitment practices:

Asia Infrastructure Solutions adheres to the Tripartite Standards for Recruitment Practices in Singapore and uses fair, merit-based, and inclusive hiring practices.

Employment agencies:

Candidates referred by employment agencies will not be considered unless the agency has been explicitly instructed to provide candidates for the stated role.

Civil Engineer

East side project

Min 3 years construction experience

Projects

(Utility diversion, trunk sewer, cycling path, bus facility works, Carparks, Tunnels)

Preferrable with LTA projects experiences in the past

Primary Objective

Manage all aspects of an engineering project, form start to finish, so that it is completed on time and within budget.

Prepare project schedule, method statement, and follow up drawing

Plan, support and attend to site works progress, safety conducts, works procedure and quality.

Liaising with Project Manager & Director, LTA & government authorities, sub-con, clients & consultants.

Key Activities

• Design, communicate and implement an operational plan for completing the project
• Monitor progress and performance against the project plan
• Take action to resolve operational problems and minimize delays
• Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
• Developing project schedules, budget, and forecasts; and selecting materials, equipment, and external contractors
• Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
• Select, and manage the activities of outside contractors to ensure they are integrated into the project and that the organization receives satisfactory standards of service
• Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
• Set priorities, allocate tasks, and coordinate project staff to meet projects targets and milestones.
• Ensure smooth authority submission.
• Solve technical issue such as drawing discrepancy, site condition changes etc.;
• Checking plans, drawings and quantities for accuracy, raise RFI when necessary;
• Ensure accuracy of setting out, levelling and site surveying;
• Ensuring that all materials used and work performed are as per specifications;
• Managing, monitoring and interpreting the contract design documents supplied by the client or architect;
• Liaising with project consultants, architect, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project;
• Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws;
• Liaising with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress;
• Overseeing quality control and assist safety department to achieve health and safety target on site;
• Preparing method statement, daily weekly report. Assist preparing monthly report;
• Raise the issue to Project Manager or Project Director if there is any unexpected technical problems, make feasible suggestion to solve the problem;
• Ensuring all site inspection and record as per client/developer requirement
• Ensuring all testing and quantity inspection are carried out as per contract requirement.

Requirement

1. BCA recognized Degree in Civil Engineering
2. Min 3 years Earthworks, Civil engineering working experiences, preferrable with LTA projects related

About the role

• Two-year contract
• Reports to Instrumentation Engineer and Senior Instrumentation Engineer;
• Maintain and implement ISO 9001, ISO 14001 & OHSAS 18001/ISO 45001 Management System effectively;
• Follow Instrumentation Engineer’s arrangement in conduct field monitoring tasks;
• Able to complete given task within permitted working hours;
• Maintain and protect the monitoring equipment diligently;
• Follow Instrumentation Engineer’s instruction in carry out adhoc work such as help out in digging manual trialpit, instruments installation.
• Implementation of the highest practicable standards of Health, Safety and Environmental Performance and maintenance of the Management Systems to ensure compliance with appropriate International Standards;
• Follow business management system and corporate compliance procedure;

About you

• Degree in Civil Engineering
• Fresh graduates are welcome
• Able to withstand long hours outdoors
• Ability to exercise job prioritization
• Team player
• Effective communication skills
• Results driven and highly motivated
• Able to deliver under pressure

What we offer

• Competitive salary with Annual Wage Supplement
• Generous paid-leave
• Career & training opportunities (international opportunities possible)
• Company shuttle from various pick-up at MRT stations across Singapore
• Collective health insurance and outpatient benefits;
• Employee Assistance Programme (EAP) to provide help when you need extra support.
• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Field Applications Engineer

STAr-Quest Technologies is seeking a Field Applications Engineer to support customers in the SE Asia territories. The candidate must have experience on wafer level test and able to demonstrate excellent communication and customer service support

Responsibilities:

· Provide onsite and remote technical support

· Perform setup and wafer level test application support such as SiPh testing

· Perform system integration with measuring test instruments

· Liaise with customers to align test requirements for establishing system acceptance criteria

· Generate reports and work with R&D team for improvement plan

· Work with Sales to participate in tenders

· Communicate internally with business units to offer test solution for customer

Employment Requirements:

· Degree in Electronic Engineering or with relevant work experience

· >2 years of technical and engineering support experience on wafer level test systems

· Broad knowledge on probers, testers and reliability tools for wafer level testing

· Programming skills such as python a plus

What we expect:

• Oversee the IT infrastructure and administration of the server, network, and relevant devices.

Ø Administration, Configuration & Maintenance of Network Infrastructure ( Firewall like Fortinet, Load Balancer like Peplink/F5 )

Ø Responsible for installing, configuring, and maintaining VM environment (VMWare, Hyper-V)

Ø Active Directory, DHCP, DNS, Anti-virus server

• Maintain servers and network file back-up/restore procedures (Internal & Cloud environment)
• Provide Local & Wide Area Network, Router, Internet, and system support/troubleshooting at all levels.

What we are looking for:

• Candidate must possess at least a Diploma or Degree in Computer Science/Information Technology or equivalent.
• At least 3 years of working experience in the related field is required for this position.
• Ability to work independently and efficiently, managing timelines and expectations.
• Good team player with strong analytical, communication, and troubleshooting skills.
• CCNA/CCNP certification is an advantage
• Knowledge in the cloud environments (AWS, Azure, Ali-cloud) will be an advantage

What we offer:

• Attractive rewards for long-term service staff
• Energetic and friendly working environment (flexible working hours, quarterly events, staff birthday celebration and etc.)
• Medical insurance

• Develop ATE test program, test hardware and bench evaluation board for analog, digital and power semiconductor devices.
• Research new test methodology for better test coverage and test time reduction.
• Work with multi-functional team to meet new product release schedule
• Proficiency in C++ Programming
• Degree in Electrical/Electronics Engineering
• Fresh graduates with good academic result are welcome to apply.

1. JOB DESCRIPTION
Job TitleSolar Site EngineerOccupationENGINEERJob Description & Requirements
We are seeking dedicated and enthusiastic local Singapore graduates with ITE & Diploma certifications to join our team as Solar Site Engineer. The ideal candidate should be willing to work under harsh conditions at project sites and possess a strong interest in renewable energy, particularly solar power systems.Responsibilities:1. Site Assessment and Preparation· Assist in the evaluation and preparation of project sites for solar installations.· Conduct site surveys and collect data necessary for the design and installation of solar systems.· Coordinate with the Project Manager to ensure all site conditions and requirements are met.2. Installation and Commissioning:· Support the installation, commissioning, and testing of solar photovoltaic (PV) systems.· Work with PM to ensure installations comply with design specifications and safety standards.· Troubleshoot and resolve issues that arise during installation3. Maintenance and Support:· Perform regular maintenance checks on installed solar systems to ensure optimal performance.· Assist in diagnosing and repairing any faults or issues with the solar equipment.· Maintain accurate records of site activities, including installation progress, maintenance schedules, and any issues encountered.· Prepare and submit reports to senior engineers and project managers4. Collaboration and Communication :· Work closely with other team members, including electricians, technicians, and project managers.· Communicate effectively with clients, contractors, and other stakeholders.Criteria:· ITE or Diploma in Electrical Engineering, Mechanical Engineering, Renewable Energy, or related fields.· Basic understanding of solar PV systems and renewable energy principles.· Willingness to work outdoors and under harsh conditions.· Strong problem-solving skills and attention to detail.· Ability to work independently and as part of a team.· Good communication skills and a proactive attitude.· Physically fit and able to handle the demands of on-site work.Preferred Skills:· Experience with solar PV system installation or maintenance (internships or academic projects are acceptable).· Familiarity with electrical drawings· Basic knowledge of electrical safety standards and practices.· Proficiency in using relevant software and tools for site assessment and installation.Working Conditions:· Primarily outdoor work at various project sites.· Exposure to varying weather conditions and potentially challenging environments.· Occasional weekend or evening work may be required to meet project deadlines.

Roles and Responsibilities:

• Design, deploy, and maintain robust cloud infrastructure to meet business needs.
• Monitor cloud resources to ensure optimal performance and cost-efficiency.
• Troubleshoot and resolve cloud-related technical issues.
• Develop, implement, and maintain configurations for underlying cloud services, including but not limited to AWS and Azure.
• Create and manage scripts for deployment, monitoring, reporting, and alerts to maintain a scalable, redundant, and highly available infrastructure.
• Analyze potential security threats and their relevance to customer environments.
• Ensure compliance with security protocols, policies, and data protection regulations.
• Manage and optimize Audio/Video/Data recording and capturing solutions (e.g., Telemessage, LeapXpert).
• Oversee archiving solutions such as Global Relay, NICE/NICE NTRX, and Behavox.
• Triage and resolve technical issues and user-reported problems.
• Collaborate with cross-functional teams to design and implement effective cloud solutions.
• Drive automation initiatives through scripting and process enhancements.
• Leverage tools like PowerShell and M365 to enhance operational efficiency.

Technical Skills:

• Proficiency in cloud collaboration tools for recording, capturing, and archiving (e.g., Telemessage, LeapXpert, Global Relay, NICE/NICE NTRX, Behavox).
• Strong scripting and automation skills (e.g., PowerShell).
• Hands-on experience with M365 collaboration and productivity solutions.
• Proven experience in managing and implementing cloud platforms like AWS and Microsoft Azure.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

Responsibilities:

• Assist Project Manager in monitoring and managing the day-to-day operations of project
• Liaise with consultants and /or sub-contractors on the project matters
• Attend meetings with owner/client/contractors/sub-cons on the project related matters
• Check drawings and raise technical queries to resolve the discrepancies in between drawings and as well as those arisen during the project execution
• Carry out in-progress inspection and joint inspection and to ensure that the works were executed to the required quality standard
• Update the project quality plan as and when appropriate
• Assist Project Manager on the tasks assigned

Requirements:

• Candidate must possess at least Bachelor's Degree/professional Degree in Engineering (Civil) or equivalent
• At least 5 year(s) of working experience in the related field is required for this position
• Preferably Seior Executive Specialized in Engineering- Civil/Construction/Structural or equivalent.

Job Scope:

• Install, maintain, and repair equipment and systems at customer sites
• Conduct regular inspections and preventive maintenance on equipment
• Troubleshoot and diagnose technical issues in the field
• Provide training and support to customers on equipment usage
• Prepare and maintain service reports and documentation
• Collaborate with internal teams to resolve customer issues
• Ensure compliance with safety and quality standards
• Manage inventory of spare parts and tools for on-site work
• Communicate effectively with clients to understand their needs and provide solutions

Requirements:

• Nitec/Higher Nitec in Mechatronics/Mechanical Engineering or Diploma in Mechanical/Electrical Engineering
• At least 2 years of hands-on experience in equipment servicing and repair
• More experienced candidates may qualify for higher positions
• Good command of written and spoken English
• Ability to write simple reports in English
• Responsible, hardworking, and able to work independently
• Positive work attitude and eagerness to learn new skills
• Capable of working under tight schedules
• Willingness to work after office hours as needed
• Availability for business trips on short notice

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Summary:

We are looking for a talented and driven Software Engineer to join our team. The ideal candidate will design, develop, and maintain high-quality software applications, ensuring they are robust, scalable, and aligned with user requirements. This is an excellent opportunity to work on innovative projects and contribute to cutting-edge solutions.

Key Responsibilities:

• Analyze user and system requirements to design and develop software solutions.
• Write clean, scalable, and maintainable code using programming languages such as [Java, Python, C#, or others].
• Develop and maintain software applications, APIs, and system integrations.
• Collaborate with cross-functional teams, including product managers, designers, and QA engineers, to deliver high-quality software.
• Troubleshoot, debug, and upgrade existing software systems.
• Conduct unit testing and integration testing to ensure software performance and reliability.
• Participate in code reviews to ensure adherence to coding standards and best practices.
• Document technical specifications, designs, and processes.
• Stay updated with emerging trends and technologies to continuously improve development practices.

Required Skills and Qualifications:

• Bachelor’s degree in Computer Science, Software Engineering, or a related field.
• Proven experience as a Software Engineer or similar role.
• Proficiency in [specific programming languages such as Java, Python, C++, etc.].
• Strong understanding of software development lifecycle (SDLC) and agile methodologies.
• Familiarity with databases (e.g., MySQL, PostgreSQL, MongoDB) and version control systems (e.g., Git).
• Experience with cloud platforms (e.g., AWS, Azure, Google Cloud) is a plus.
• Strong problem-solving skills and attention to detail.
• Excellent communication and collaboration abilities.

Preferred Qualifications:

• Experience with front-end technologies such as React, Angular or Vue.js.
• Knowledge of DevOps practices and tools (e.g. Docker, Kubernetes, CI/CD pipelines).
• Certifications in relevant technologies (e.g. AWS Certified Developer, Oracle Java Certification).

Review and comment on the implementation of structural safety improvements.

Manage steel structure projects from initial design to final implementation,including budgeting, scheduling,and coordinating with other teams.

Work closely with architects, civil engineers, project managers, and construction teams to integrate structural requirements into overall project design.

Provide structural technical support and manage the technical accuracy of existing structures.

To manage your own and your project teams work to programme, cost and quality requirements.

Salary: Up $3000+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• Able to write simple report

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

• Understanding and carrying out all tasks given by the Senior Engineer.
• Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.
• Performing regular inspections of equipment and scheduling maintenance or repairs.
• All other duties as per assigned by Project Manager/Senior Engineer and coordinate all sub-cons, suppliers, clients, and workers to meet the schedule and quality standards
• Working in collaboration with the senior engineer to design procedures, assessment techniques planning, and execution of a range of engineering projects.
• To control and guide safety instruction to underworking your worker
• Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; escalating project completion impediments.
• Prepares engineering reports by collecting, analyzing, and summarizing data and trends; entering data and generating reports and presentations; performing calculations.
• Determine budget, schedule, manpower, and material and equipment requirements to execute construction projects.
• Provide technical assistance to field staff when needed.

Qualifications:

• Minimum 5 years of experience as a DevOps Engineer, Site Reliability Engineer, or in a similar role within a GCC (AWS).
• Required experience on GCC SHIP2.0
• Proficiency in CI/CD tools (e.g., Jenkins, GitLab CI,) and configuration management tools – Terraform

CI/CD Pipeline Design and Optimization:

• Collaborate with development and operations teams to design efficient CI/CD pipelines that streamline the build, test, and deployment processes.
• Implement GitLab CI/CD best practices and optimize pipelines to reduce build times and improve deployment efficiency.
• Develop and manage infrastructure as code scripts to automate GitLab infrastructure provisioning and configuration.
• Leverage GitLab APIs and CI/CD scripts to automate repetitive tasks, reduce manual intervention, and enhance team productivity
• Able to design and create release management- managing multi release deployments and env management.
• Strong knowledge of AWS services for Network, compute, storage, security, scalability, monitoring, and alert management
• Strong scripting skills in languages such as Python, Bash, or PowerShell.
• Experience with IaC tools (e.g., Terraform, AWS CloudFormation) and version control systems (e.g., Git).

Top Mandatory skills:

1. CI/CD tools (e.g., Jenkins, GitLab CI,etc
2. Configuration management tools (Jira/confluence/gitlab Wiki)
3. GCC SHIP2.0
4. IAC setup for Inrfa - terraform

Skills which are good to have / optional:

1. Knowledge of Python/API development
2. Setup and development of CI/CD pipeline
3. Experience on AWS chimes/Kinesis/Gen AI (bedrock)

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' to drop your resume or email at [email protected]
• All shortlisted candidates will be contacted.

Saghana Sithara | Registration Number: R1550224

We are looking for a seasoned AWS Technical Architect to design, implement, and optimize our cloud infrastructure on AWS. The ideal candidate will have extensive experience with AWS services, infrastructure automation using Terraform, and in-depth knowledge of networking, compute, storage, database, monitoring, and alerting solutions. This role is critical to ensure our cloud infrastructure is secure, scalable, and efficient.
Required experience of GCC and IM8 policies.

Experience with advanced AWS tools and frameworks like Kinesis, Chime, OpenSearch, and Generative AI (GenAI) using Retrieval-Augmented Generation (RAG) is highly valued.

Key Responsibilities:

Cloud Architecture and Design:

• Design and implement highly available, resilient, and scalable architectures on AWS, including networking, compute, storage, and database solutions.
• Architect solutions that leverage AWS best practices for security, cost optimization, and performance.

Infrastructure as Code (IaC):

• Develop, maintain, and manage Terraform configurations for automated provisioning and management of AWS resources.
• Implement best practices in version control, modularization, and reuse to ensure IaC maintainability and scalability.

Networking and Security:

• Design secure VPC architectures, subnets, routing, VPNs, and peering connections for multi-region and hybrid environments.
• Manage security groups, network ACLs, and identity access management (IAM) to ensure a secure AWS environment.

Compute, Storage, and Database Solutions:

• Leverage AWS services like EC2, ECS Fargate, and Lambda for compute workloads, based on application needs.
• Design scalable storage solutions using S3, EBS, and EFS.
• Architect and optimize database solutions with RDS, DynamoDB, and Aurora.

Monitoring, Logging, and Alerting:

• Implement monitoring, logging, and alerting solutions using CloudWatch, CloudTrail, and the ELK Stack (Elasticsearch, Logstash, and Kibana) to ensure observability and troubleshooting capabilities.
• Set up proactive alerts and monitoring for performance and security issues to minimize downtime and optimize performance.

Top Mandatory skills:

1. Cloud Architecture and Design
2. Infrastructure as Code (IaC)
3. Networking and Security
4. Compute, Storage, and Database Solutions
5. Monitoring, Logging, and Alerting
6. experience on GCC (AWS) – Familiar with Govtech IM8 guidelines/policies

Skills which are good to have / optional:

1. Knowledge of Python/API development
2. Setup and development of CI/CD pipeline
3. Experience on AWS chimes/Kinesis/Gen AI (bedrock)

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' to drop your resume or email at [email protected]
• All shortlisted candidates will be contacted.

Saghana Sithara | Registration Number: R1550224

Job Description:

· Overseeing the daily site activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programmes.

· Coordinate with different departments concerning the site work activities.

· Work closely with sub-cons, highlight any work-related matters for team's discussion and solutions.

· Supervise works on-site for proper work execution and safety.

· Handle any engineering/technical issues.

· Prepare daily progress reporting and maintain records that are up to date.

Requirement:

· Minimum a Diploma / Degree in Civil Engineering or equivalent.

· Able to work independently with minimal supervision under tight schedule.

· Meticulous and good communication.