Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to manage the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.

• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.

• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.

• Contribute necessary improvements and offer advice about operational procedures.

• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications

• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.

• Work with the Service Department to resolve enquiries, if required.

• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.

• Able to travel in short notice.

• Good verbal communication skill.

• Physically capable and available to work overtime including weekends and public holidays.

• Ensure a safe working environment.

• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.

• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).

• Desirable overtime allowance after probation period.

Interested applicants can also send your resume/ cv to ‘[email protected]’.

What you will do

• 6G technology research & development
• New technology prototype, proof-of-concept, and system validation/verification
• Develop technical proposals for international standardization
• Eco-system engagement for 6G initiatives

What you will bring

• MS or PhD degree in Electrical Engineering, Communication Engineering or related.
• Possess strong knowledge in digital signal processing (DSP) and have experience in evaluating and designing communication algorithms.
• Deep understanding of mobile communication system and specifications, including standards such as 3G, 4G, 5G, and beyond.
• Hands-on experience in practical implementation for wireless communication system. Programming skill in C/C++, Matlab, Python, Verilog or VHDL, etc. is preferred.
• Strong background in the wireless communication industry, with a proven track record of working on wireless communication technologies.
• Expertise in at least one of following special areas is preferred: artificial intelligence (AI) applied to wireless communication, satellite communication systems, or energy engineering related to wireless networks.

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

The Government Technology Agency (GovTech) is the lead agency driving Singapore’s Smart Nation initiatives and public sector digital transformation. As the Centre of Excellence for Infocomm Technology and Smart Systems (ICT & SS), GovTech develops the Singapore Government’s capabilities in Data Science & Artificial Intelligence, Application Development, Smart City Technology, Digital Infrastructure, and Cybersecurity.

At GovTech, we offer you a purposeful career to make lives better. We empower our people to master their craft through continuous and robust learning and development opportunities all year round. Our GovTechies embody our Agile, Bold and Collaborative values to deliver impactful solutions.

GovTech aims to transform the delivery of Government digital services by taking an "outside-in" view, putting citizens and businesses at the heart of everything we do.

Play a part in Singapore’s vision to build a Smart Nation and embark on your meaningful journey to build tech for public good. Join us to advance our mission and shape your future with us today!

Learn more about GovTech at tech.gov.sg.

Who We Are:

The Singpass team builds Singapore’s digital identity system. This includes various personal authentication protocols, data sharing tools, and corporate identity systems through Corppass. The team’s mission is to provide reliable digital identity infrastructure that streamlines transactions, enables businesses, and protects against fraud. As a software engineer, you will:

• Build prototypes to demonstrate technological opportunities
• Design system architectures
• Write production quality code
• Manage deployments to cloud infrastructure
• Maintain systems to a high level of reliability

Because our team focuses on pushing new initiatives, you will also have to:

• Identify potential projects that improve the public good
• Design novel systems that work around bureaucratic constraints
• Advocate and explain these technical ideas to other government agencies

We are also looking for experienced software engineers! In addition to the above, more experienced software engineers will be expected to:

• Establish best practices for developer operations
• Provide technical leadership across multiple product teams
• Share your expertise and mentor other engineers
• Help with recruiting

You're not just here to write code, but also to figure out what we should be building and how we should build it. You will work on meaningful projects that solve problems pertinent to our society. The public sector is full of opportunities where even the simplest software can have a big impact on people’s lives. Rather than work on commercial ventures commonly found in the startup scene, we're here to improve how we live as a society through what we can offer as a government.

Your job will be to bring expertise and capability to the public sector.

Sometimes this means coding new systems from scratch. Other times this means using the best solutions the development community has to offer. We use cloud services, open source software, and commodity hardware as far as possible. These often include, but are not limited to: GitHub, AWS, React Native, MongoDB, and Stripe amongst others. Knowing what to build and what to reuse lets us avoid wasting time on solved problems and focus on delivering actual value.

What it is like working here:

• Rapid Prototyping - Instead of spending too much time debating ideas we prefer testing them. This identifies potential problems quickly, and more importantly, conveys what is possible to others easily.
• Ownership - In addition to technical responsibilities, this means having opinions on what is being done and having ideas on what should be done next. Building something that you believe in is the best way to build something good.
• Continuous Learning - Working on new ideas often means not fully understanding what you are working on. Taking time to learn new architectures, frameworks, technologies, and even languages is not just encouraged but essential.

Who we are looking for:

We work mostly in Typescript. However, we don’t require experience in any specific programming language or technology. Core competency in at least one language and the ability to learn is what matters to us. We look for people who:

• Have a demonstrated ability to build software - Prior work and personal projects count for much more than specific degrees.
• Write code to solve abstract programming problems - Clear thinking, the ability to debug, and understanding the limits of an approach matter much more than getting the “correct” answer.
• Talk and reason about code with other engineers - We work as a team so you need to be able to not just solve problems, but have other people understand your solutions.
• Take initiative to make things happen - Our job is to push for change in government, so we need to challenge the status quo and not wait for instruction.
• Want to work for the public good - We are public servants, we serve the public. This sometimes means ignoring political pressures and misguided policies. We need people who will push back if something is not in the public interest.

Overall we look for people who have ability, initiative, good communication, and strong values.

Our employee benefits are based on a total rewards approach, offering a holistic and market-competitive suite of perks. These include leave benefits to meet your work-life needs and employee wellness programmes.

We champion flexible work arrangements (subject to your job role) and trust that you will manage your own time to deliver your best, wherever you are, and whatever works best for you.

Learn more about life inside GovTech at go.gov.sg/GovTechCareers.

Stay connected with us on social media at go.gov.sg/ConnectWithGovTech.

Job description:

• Responsible to develop and review electrical design plans, specifications, and construction documents for the project.
• Provide technical guidance and oversight to the electrical design team, ensuring that electrical systems are designed and installed according to project standards and codes.
• Collaborate with architects, structural engineers, and other stakeholders to ensure that electrical systems are integrated correctly into the building design.
• Review shop drawings, submittals, and RFIs related to electrical systems and equipment and provide timely feedback to the design team.
• Conduct site visits and inspections to ensure that electrical systems are installed correctly and according to the design plans and specifications.
• Manage the commissioning and start-up of electrical systems and equipment, including testing and troubleshooting.
• Provide technical support to the construction team, including addressing technical issues, resolving conflicts, and managing change orders related to electrical systems.
• Review engineering designs and calculations to ensure compliance with all relevant codes, standards, and regulations.
• Any other duties as assigned from time to time.

Job requirement:

• Bachelor's degree in electrical engineering or a related field is required.
• At least 8 years of experience in electrical engineering, with a focus on construction projects. Candidate with less experience will be considered for a junior role.
• In-depth knowledge of electrical systems, including power distribution, lighting, fire alarm, and other related system.
• Strong technical skills, including proficiency in computer-aided design (CAD) software and other relevant tools.
• Excellent communication, organizational, and problem-solving skills.
• Ability to work collaboratively with diverse teams and stakeholders.
• Knowledge of industry codes and standards related to electrical systems.
• Sound knowledge of key Health and Safety issues and legislation.

Roles & Responsibilities:

· Assist Project Manager in monitoring and managing the day-to-day operation of projects

· Analyzing technical drawings, interpreting specifications, and determining the electrical requirements of a given project.

· Reviewing all engineering design plans to ensure compliance with project goals.

· Attend meetings with owner/client/contractors/subcontractors on project related matters.

· Ensure compliance with local codes, regulations, and safety standards

· Check and raise technical queries to resolve the discrepancies between drawings as well as those arisen during project execution.

· Ensuring health and safety codes are obeyed at all times.

· Ensuring all deadlines and budgetary requirements are met.

Job Requirement:

· Bachelor’s degree in electrical engineering or a similar field.

· Minimum 5 years working experience in the related field within the built environment

· Proficiency with CAD software and MS Office.

· Excellent time management and diagnostic skills.

· Strong communication and interpersonal skills.

Software Development

1. Design, Develop and Maintain device drivers for Windows Operating Systems

2. Undertake WHQL testing and certification of drivers and device frameworks.

3. Design, Develop and Maintain User Libraries and DLLs.

4. Participate in all phases of SDLC and prepare corresponding documentation

5. Undertake porting and maintenance of existing drivers to new frameworks and OS’s

6. Resolve defects reported by internal and external customers

7. Collaborate with USB host & device firmware development teams.

Knowledge and skill requirements:

1. Degree/Master’s in computer science/Engineering or related field.

2. 5 years or above experience in the area of device drivers development, preferably USB

3. In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs

4. Excellent C Programming Skills.

5. Professional attitude to work and meticulous in coding and testing

6. Must have participated and experienced in SQA processes.

Good to have Skills:

1. C++ / .Net / Python Programming Knowledge is a plus.

2. Knowledge of USB2.0 and USB3.0 protocols and USBCV is a plus.

3. Knowledgeable in WinUSB / libusb (Windows or Linux) is plus.

4. Embedded development experience in WinCE, MacOS, Android or Linux is a plus.

5. Experience working with hardware boards, scope and USB analysers is a plus.

Jason Marine Group Limited is a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

Wärtsilä is a world leader in marine technology and leading the industry's transformation towards a decarbonised and sustainable future. With the world’s widest portfolio and service network, we – Wärtsilians - deliver efficient, safe and sustainable integrated products and solutions to enhance the business of our customers. The opportunities presented through digitalisation and new technologies are offering a new era of shipping. Did you know that shipping is the world’s most efficient mode of transportation and that approximately 90% of world trade is carried by sea?

We want to change the course towards an interconnected and cleaner maritime future and are constantly on the lookout for future-oriented talent to join our team and to work towards enabling sustainable societies through innovation in technology and services - together. Are you ready to jump onboard?

We are looking for a Service Engineer, 2-stroke Services. This is a permanent opportunity, and its location is Singapore.

As a Service Engineer, 2-stroke Services, your responsibilities for the role include:

- Perform Field Service activities according to the work plan

- Perform mechanical/electrical and troubleshooting on 2-stroke engines and ancillary equipment

- Perform technical advisory for repair activities executed on customers' responsibility

- Commissioning of service products

- On-site team leading and managing of the assigned team and related activities during the work execution

- Interact with customers during the work execution

- Interacting with Field Services back office and Technical Services during work execution

- Perform internal and external progress status up-dates of the assigned work

- Ensure that the work is executed according to Wärtsilä Quality, Health, Safety, and Environmental guidelines and customer site procedures.

- Create the Service Work Reports

- Proactively consulting, advising, and promoting available Wärtsilä solutions and products to customer

To be successful in this role, we expect you to have:

- BSC Degree with 2-5 years of working experience in the related field

- Diploma in mechanical, and marine engineering with more than 5 years of working experience in the related field

- Excellent technical knowledge and problem-solving skills

- Good command of English, both written and oral

- Ability to work independently

- Willingness and flexibility to travel up to 80% of the time

- Ability to create internal and external work reports

- Ability to communicate and interact well with customers and other stakeholders

- Literacy in Information Management Applications/ Tools such as MS Office

At Wärtsilä we value, respect and embrace all our differences, and are committed to diversity, inclusion and equal employment opportunities; everyone can be their true self and succeed based on their job-relevant merits and abilities.

This is Wärtsilä

Wärtsilä is a global leader in innovative technologies and lifecycle solutions for the marine and energy markets. Our team of 17,000 professionals, in more than 200 locations in 68 countries, shape the decarbonisation transformation of our industries across the globe. Read more on www.wartsila.com.

Contact & next steps

Does this sound like the job for you? If yes, we hope to hear from you before the application deadline by submitting your application through our careers portal. Are you still wondering if you should apply and would like to get something clarified? Please reach out to David Samuel, Talent Acquisition Specialist ([email protected]) with any questions related to this position.

#FSWSCareers

On behalf of CTS Asia Pacific, we are looking for a PLC/Robotics Engineer!

While this role is customer-facing, in addition to the customer, work tightly together with the Project Manager, and other project team members as required to support each other in our close-knit team.

The preferred educational background in one of more of the following Software Engineering, Mechanical Engineering, or Electronic/Electrical Engineering from a local institution in Singapore. We welcome ITE graduates, but expect you to show 3-5 years relevant experience. For Diploma holders, 2-3 years; and for Degree holders, 1-2 years experience is expected. Training will be provided!

What are you expected to do?
- Project planning of automation solutions for industrial manufacturing plants
- Simulation of the process plant
- Software creation (e.g. robots, safety controls or HMI)
- Integrating drives and robots into the machine
- Commissioning of the machine with the software created for process testing in-house, and start-up support for the customer

What should you bring with you for this application?
- Good to have: Relevant experience and knowledge in Siemens PLC.
- Points of contact in the programming of controls (e.g. Simatic S7, TIA, PCS7, B&R, Beckhoff etc.)
- Creating user interfaces and/or drive technology is desirable but not a must
- Enjoy holistic project processing and an agile way of working
- Interest in technical challenges and robots

Do note that we are on the lookout for key members who can work independently and responsibly in a local team with collaboration from HQ in Germany.

It should also be exciting for you to know that training opportunities are ample in Singapore, and exchange abroad are available; in the future, projects scope will expand regionally too.

NousQ is a Singapore-based company focusing on research, design, develop, manufacture and commercialize medical technology and solutions that optimize healthcare delivery and serve large unmet needs for patients. The focus is on patient-centric solutions that patients really want and need. NousQ is proud to be the Top 5 winners of the Medtronic APAC Innovation Challenge 2022, and is honored to be the winner of other innovation challenge such as MedTech Innovator Challenge APAC 2022 Accelerator Cohort, Victoria Health Week MedTech Festival as well as the recent China TusStar APAC Challenge.

Currently, NousQ is looking for a passionate Firmware Engineer to join our growing team. We want to introduce the world to CLiKX, a revolutionary and cutting-edge robotic medical device. CLiKX will transform the way glue ear surgeries are now performed by moving the procedure from the operating room to an outpatient setting. As a result, the time, money, and resources needed for such a procedure are significantly reduced. A talented and motivated engineer has the opportunity to join our team of pioneer innovators in bringing CLiKX to the millions of untreated children who suffer from glue ears.

Profile / Qualifications:

This position is for an engineer with Bachelor’s or Master’s degree in Computer Science/ Electronics/Computer Engineering with 1 – 2 years of experience in embedded system development. Fresh graduates with relevant experience may be considered. The engineer will be a part of the startup team focusing on new product development.

· Good understanding of product realization process and preferably with prior experience or interest in medical device software design and development processes.

· Relevant experiences include coding with programming language such as C/C++ and/or competent in applying other similar IDEs/ toolchains for firmware development.

· Knowledgeable in quality concepts including verification and validation, and reliability testing.

· Good understanding of medical device software regulatory requirements, such as IEC62304 is a plus.

· Experience in AI-related development is a plus.

· Excellent communication skills in spoken and written English and good inter-personal skills to engage and interact with team members, vendors, consultant and any potential third party.

· Possess a high level of integrity, independent, self-motivated and enjoy working in a fast-paced startup environment.

Job Description

The responsibilities in supporting product development team include but are not limited to:

· Participate in ideation, conceptualization, design and iteration, verification and validation, manufacturing support for new product pipeline involving firmware.

· Involve in design reviews to identify issues and derive robust solutions that meet the intended use, safety and effectiveness, as well as quality of the product.

· Collaborate with manufacturing partners to communicate design concepts, technical and/or business trade-offs, and engineering solutions.

· Perform firmware engineering tasks including:

(i) Translate / refine high-level requirements into the architecture and engineering specifications of the firmware system

(ii) Design, develop, integrate and debug/troubleshoot the embedded system / MCU related hardware to meet the defined objectives, targeted cost and schedule.

(iii) Support the development and execution of relevant test plans, including unit test, integration test and system test to verify and validate that the product is able to meet all requirements.

(iv) Support functional and reliability tests to ensure safety and performance of the overall product systems.

· Generate and maintain the necessary documentation for the firmware systems, including design documents, firmware architecture, schematics, SOP/work instructions, Device Master Record (DMR) and other documentations needed to meet the regulatory requirements such as Design History File (DHF), IEC62304, ISO13485 & FDA 21 CFR Part 820.

· Oversee firmware design change orders and support any relevant verification and validation activities.

· Support ad-hoc administrative duties as and when required to ensure smooth operation of the company’s activities.

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Candidate is expected to carry out Test Board Maintenance activities (Visual inspection, testing, framing, rework, washing, drying, packing etc)

Candidate is also expected to identify issues by recognizing data trends and to be able to read diagram and information from circuit.

Candidate must be driven and able to work independently and systematically to maintain delivery of excellent services.

Basic mechanical, electrical and programming knowledge is preferred to facilitate troubleshooting and root cause analysis.

Responsibilities and Duties

• Repair and maintenance of Test Board
• Maintain max passing yield results
• Test Board Maintenance activities (Perform socket replacement and testing)
• Identify Issues
• Reporting of service activities
• Management of spare socket inventory

Requirements

Service Engineer – Diploma in Engineering

Technical Specialist – Diploma in Engineering

Strong in hands-on, able to work independently with minimum supervision

Able to do soldering work on tiny component

Technical Specialist will assist Service Engineer in above duties. Diploma holders demonstrating good technical capabilities will be considered for Service Engineer

Reporting to the Director of Sales, Domestic, you will be responsible for the revenue generation of assigned portfolios. You will also be expected to develop, service, retain, and acquire new business opportunities.

Duties and Responsibilities:

• Identify sales opportunities and develop new accounts
• Drive sales, monitor and track; and take necessary actions to ensure that goals are met
• Prepare and submit quotations, proposals, and tenders
• Ensure customer orders are processed accordingly
• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Enhance value-added selling approach
• Provide quality after-sales service to customers

The Successful Applicant:

• Preferably with a diploma or degree in Mechanical Engineering or equivalent
• Minimum 3 years of working experience
• Experience in Engineering or a related field would be an added advantage
• A team player who is meticulous and able to work independently
• Computer literacy (MS Office)
• Possess own transport
• Salary commensurates with qualifications and experience

We invite interested and qualified candidates to write in with their updated resumes (in MS Word Format) and their current and expected salary.

We regret that only shortlisted candidates will be notified.

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. of 8 years of relevant verification experiences.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

About the Opportunity

This role in our Technology squad is embedded in a high caliber, cross functional team that develops and executes our exciting technology strategy to deliver better outcomes for our business and customer.

As a Software Engineer, you will be working with an agile and innovative team and build on your technical expertise with a myriad of technologies, projects and platforms to deliver our business priorities and conquer technical challenges.

What You'll be Doing

• Support the delivery of projects in all aspects of Software Development Life Cycle including system analysis, design, development, quality assurance, UAT, maintenance and ongoing support.
• Contribute to Agile software development lifecycle and be familiar with DevOps processes.
• Develop pragmatic and fit for purpose solutions of high technical quality.
• Work with stakeholders to define and clarify functional requirements and scope to deliver robust cost-effective solutions.
• Maintain software design, engineering processes and quality standards.
• Identifying and addressing bottlenecks in the application or broader infrastructure.
• Assist with ad-hoc duties assigned by Manager.

What We Are Looking for

• Diploma/Degree in Information Technology/Computer Science or related fields.
• 2 years’ experience in full stack software development.
• Required skills: C#, .NET Core framework, Angular.
• Knowledge in DEVOPS, Docker Container, Cloud Implementation, Secured Webservice will have an added advantage.
• Highly collaborative team player, detail-oriented and passionate with technology.
• Ability to thrive in fast-paced, exciting environment.

We regret that only shortlisted applicants will be notified for an interview.

To learn more about our Organization, please visit https://www.alliancehealthcare.com.sg.

Job Title: QC Engineer (ID5080)
Location: Serangoon
Working Hours: Mon to Fri 8.30am - 6pm
Salary: $3200 to $4500

Job Description:
• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Requirement:
• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

Diploma or Degree in mech/ civil/ industrial engineering with 6-10 years of experience , Willing to work at construction site and process plants . Expect fabrication, piping standards, equipment installation , with erection and commissioning knowledge . Atleast 2 of the above is a must . Candidates without necessary qualifications but willing to learn and come up are encouraged to apply too

Job Title: Marine Construction Project Engineer (ID8353)
Location: Bukit Batok, Singapore
Working Hour：5.5 days (Monday to Friday 8-5, Saturday 8-12) but may required to OT due to project requirement (7am-7pm)
Salary: $3700 - $4600

Job Description:
-Pre-plan and prepare construction schedule, and coordinate activities.
-Follow up and report On-site and Off-site project management and progress.
-To prepare and submit progress reports as required by consultants and clients.
-Analyse project specifications, including civil/structural, architectural, and M&E drawings..
-Perform other project related administrative duties assigned.
-Coordinate, prepare and arrange site inspection with RE & RTO.
-Arrange daily Toolbox Meeting with Site Supervisor and WSHC and briefing on site activities and daily task. Arrange Site daily activities with Site Supervisor.
-Attend monthly, weekly safety meeting and site works with Client.
-Prepare necessary submission for project. Example, RFI, MS, RA, SWP, shop drawings and supporting documents preparation.
-To prepare and keep records, summary related to project. Maintain Project documents control for ISO purpose.

Requirement:
-Minimum Bachelor's degree in Civil Engineering only.
-Minimum 2 to 4 years of work experience in infrastructural or marine construction industry.
-Relevant project experiences in dredging, reclamation or near shore construction will be preferred.
-Knowledge of construction methods, materials, and BCA regulations.
-Working hour from 7am to 7pm from Monday to Saturday.
-May require to assist in variable projects.
-Strong organizational and communication skills.
-Ability to work well under pressure and in a fast-paced environment.

Responsibilities:

- Full lifecycle development from design to mass production of backend semi-conduct equipment with high speed and high accuracy, including:

- Design requirements collection and analysis

- Conceptual design and verification, proof of concept

- Detaile design, 3D modeling (Solidedge/Solidworks…), 2D drawings

- CAE of vibration, thermal, fluid…

- Procurement of prototype parts from internal and external sources

- Cooperate with production on fabrication, assembly and testing, create assembly and test procedures for mass production

- Address and resolve product issues, continuously improvement of product

Requirements:

- Bachelor and above level degree in mechanical engineering,

- Proficient with solid CAD, such as Solidworks, Solidedge, ProE

- Proficient with CAE tools such as ANSYS, Solidworks simulation

- Self-motivated, autonomous learning of mechanical engineering fundamentals on high performance mechanism, including

- Vibration theories, vibration measurement, isolation and damping

- Static mechanics, dynamic mechanics, structural mechanics, materials, heat transfer theory, fluid dynamics

- Solenoid and pneumatic components selection

- Tolerance analysis

- Fabrication methods, DFM, DFA

- Fresh graduates with relevant experience are also welcomed

- Be able to travel abroad for business trip and able to work in a multicultural

environment and with people at all levels

- Proficient in written and spoken English

- Able to speak fluent Mandarin would be an advantage (to liaise with Chinese

speaking associates)

- Applicant with more years of relevant experience will be placed on Senior Engineer role

Job Title: IT Infrastructure & Support Engineer (ID7029)
Location: Clementi
Working Hours: Mon to Fri 830am-6pm
Salary: $4500

As a key member of the IT team, the candidate will be responsible for overseeing and optimizing infrastructure systems across both local and overseas sites.


Key Responsibilities:
• Manage and configure infrastructure systems (Active Directory, data centers, telephony, video conferencing, etc.) and network devices (firewall, VPN, wireless, etc.).
• Ensure automatic system backups, implement disaster recovery plans, monitor resource usage, and apply patches as needed.
• Coordinate with external vendors to ensure Service Level Agreements (SLAs) are met.
• Develop and maintain technical documentation such as admin and user guides.
• Provide technical support to local and international branches, ensuring LAN/WAN security.
• Source products, solutions, and vendors for project needs.
• Offer L1/L2 support and contribute as a team lead or member in various IT projects.

Requirements:
• Singaporean/ PR only.
• Diploma or Degree in IT/Computer Science, or a CCNA certification.
• Proficiency in English and Mandarin is required to liaise with overseas stakeholders.
• At least 1 year of experience in enterprise networking (WAN/LAN, VPN).
• Proficient in managing Microsoft Server, Microsoft 365, and Google Suite.
• Solid knowledge of TCP/IP, DNS, DHCP, Proxy, and Firewall setup.
• Familiarity with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless controllers.
• Strong understanding of CyberRisk, CyberSecurity, and PDPA.
• Experience with Veeam, VMware, UNIX/Linux, API/Web programming, and database management is a plus.

• Position : Service Technician (Electrical Engineer-Desalination/Water treatment)
• Location : Jurong Island-Company transport provided at Choa Chu Kang/ Jurong East MRT station
• Working hours : Monday -Friday, 9.00am-6.00pm
• Salary (commensurate with experience): Up to $3200+ Site Allowance + 1 month completion bonus + 14 days annual leave + Medical reimbursement + 2 days Family Day
• Duration : 2 year contract - convertible or renewable
• Industry : Power Generation

Main Responsibilities:

• Carry out inspection and maintenance of electrical equipment in Desalination Plant
• Perform troubleshoot and implement solution for safety and maintenance work
• Supervision of contractors and perform administrative duties to ensure high quality of work and comply to safe work procedures

Requirements:

• Diploma in Chemical/ Environmental Engineering (or equivalent) with minimum 1-2 years of related experience in Utilities, Power, Petrochemical or Process Plant
• Candidate without experience or NITEC in Chemical/ Environmental Engineering (or equivalent) with minimum 2-3 years of related experience in Utilities, Power, Petrochemical or Process Plant are welcome to apply
• Willing to OT on weekend/ Public Holiday
• ALL WELCOME!!

Email to [email protected]

***We DO NOT charge our candidates any referral fee nor bind them with

any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Site M&E Engineer

• Supervise and coordinate the activities of M & E site contractors;
• Monitor job progress and ensure that M&E contract works meet all practical, commercial, requirements of productivity, quality, and contract target completions;
• Ensure all M&E works are carried out within established budgets and schedules;
• Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.
• Implement and oversee site projects assigned to ensure smooth project execution
• Manage internal and external contractors well to ensure the quality and scope of work are within specifications.

Requirements

• Min 5 years of A & A new build warehouse projects relevant working experience
• Good communication skills and a team player
• Positive working attitude and highly adaptable

Commitment: 6 months internship

We are looking for Food Science and Technology intern to join our R&D team. As a Food R&D intern, you would be involved in analyzing data and documentation filling to support the R&D teams. You will work with the Food Technology team to develop solutions at the product level while maintaining and enhancing the food quality.

Job Descriptions

• Assist in Product R&D projects trial.
• Conduct technical evaluation for new products samples produced in our R&D laboratory
• Assist in Packaging design especially technical contents involved (accuracy and compliance to country regulations).
• Conduct validation of shelf life or shelf life studies.
• Facilitate new R&D product sample preparations.
• Technical evaluation of new raw materials.
• Handle all filing of R & D documentations including Customer Requirement Files, Halal Certification file and support R&D/QA Manager in documents update relevant to R&D/QA systems.
• Update ISO/HACCP documents when changes occur
• Responsible for laboratory routine house-keeping program (5’S)
• Support QA/QC functions when needed e.g. issues investigation and report writing.
• Do other task assigned by superior.

Requirements:

• Diploma/ Degree in Food Science or Food Technology
• Self-starter, results oriented, and able to multi-task.
• Must be forward-thinking.
• Ability to work independently as well as in a team.
• Strong time-management and organizational skills.
• Have great attention to detail and ability to keep detailed written records.
• Have strong communication skills including verbal and written (English).

Interested applicant may send your cv/resume via whatsapp +65 84597671