Responsibilities of Resident Engineer (M&E)

The Resident Engineer (M&E) assisted by a team of site personnel shall, for those parts of the works for which the company is responsible for design, be responsible for the following:-

a. Study and familiarise with the whole development’s organisation, Site conditions, Conditions of Contract, Conditions of Sub-contract, M&E Specification/Drawings, Architectural, Interior, Structural and Specialist drawings, Coordination of M&E, Architectural, Interior, Structural and Specialist elements.

b. Supervise/monitor the contractors’ work to ensure that the work is carried out in compliance with the design intent, specification and quality of works required under the terms of the contract.

c. Maintain a Site Diary of events and daily surveillance.

d. Attend site progress meetings/technical meetings/consultants’ meetings.

e. Keep a close check of the contractors’ installation details of item which require specific compliance to code of practice/manufacturer’s installation instructions, e.g. fire dampers, fire-rating of ducts, etc.

f. Ensure timely submissions of shop drawings, technical submittals, samples, etc. by the sub-contractors.

g. Check and review all work/shop drawings, technical submittals and samples, etc. submitted by the contractors.

h. Monitor the progress of work on site, verify the contractors’ progress report and present the report to the PM in such format that the progress payment claim by the contractor can be easily evaluated.

i. Verify the contractors’ progress payment claim in terms of work done and materials/equipment delivered and stored at site.

j. Check that the current project drawings and documents are available at the work site and ensure that superseded copies are removed and/or suitably marked up where not destroyed.

k. Seek clarification from the PM on any apparent discrepancies between site and contract drawings, specification requirement, shop drawing, etc. before giving any directions to the contractor.

l. Record all such verbal clarification with the PM and/or contractor in the Site Diary/Record of telephone conversations and follow-up with appropriate Site Memo if no prompt action by the relevant parties become evident.

m. Refer to the PM on any urgent works which become necessary for a satisfactory and operational system but will have time and cost implication to the contract.

n. Refer to the PM for decision on any requests for additional work outside his authority.

o. Maintain site files of correspondence, documents and drawings in accordance with standard filing system for easy retrieval and reference.

p. Report to the PM where contractors’ site supervision is considered deficient for quality assurance.

q. Ensure that the contractors take appropriate precautions for the handling and preservation of equipment, materials, including all Testing and Measuring Equipment.

r. Prepare and up-date the list of outstanding/non-compliance works and submit to the PM for discussion at site meeting/technical meeting.

s. Monitor and report on the progress of installation against the integrated construction program, and prepare reports on the site progress if requested by clients.

t. Resolve site coordination problems.

u. Assist the client’s site representative in ensuring that the site and completed installation are left clean and tidy.

v. Compile relevant equipment, material, inspection and test certificates submitted by the contractors and pass them to the PM as required for the project records and the clients’ hand-over package.

w. Ensure installations are adequately completed to meet authority inspection dates.

x. Compile Punch List or Defect List with the contractors and ensure that the contractors carry out rectification work diligently to clear all defects during the Maintenance Period.

y. Witness all the inspection, testing and commissioning sessions performed by the subcontractors to ensure compliance with designs and specifications.

z. Verify results against design requirements and report and/or make recommendations to the PM.

aa. Aware of the potential and actual OH&S hazards of his activities at the workplace and to highlight / communicate to the PM when he knows of any irregularities. He shall be aware of his individual OH&S obligations by ensuring that he is adequately equipped with appropriate safety gears, by observing closely to all safety rules / regulations / procedures at site and by attending all relevant site safety trainings.

bb. Aware of the potential and actual environmental aspects & impacts of the activities within his job scope (including potential savings in resources through reduced electrical/water/paper usage at site). He shall be aware and comply with the applicable legal and other requirements; adhere to all applicable environmental management procedures; highlight and communicate to PM of any irregularities/concerns and contribute suggestions to improve the environmental performance.

cc. Understands and adheres to the procedures as depicted in the ‘Site Administration Manual’, participate and support the company’s QEHS management system, including the QEHS Policy and Objectives.

Requirements

1. Degree in Electrical/ Mechanical or Building Services Engineering
2. Minimum eight (8) years of M&E work experience as a Resident Engineer (RE)
3. Conversant in local construction practices, air-conditioning, electrical, fire protection, plumbing and sanitary services.
4. Good co-ordination skills
5. Good analytical ability with strong verbal and written communication skills.
6. Self-motivated, proactive and team player
7. Past work experience in healthcare/residential/institutional projects is preferred.
8. Commencement Date: Q4 2024/Q1 2025

Job Requirement:

• Degree in Civil/Structural Engineering.
• Recognized by PEB Board/IES.
• Must have at least 2 years of related experience.
• Proficient in Microsoft Office and AutoCAD.

Responsibilities:

• Responsible for all on-site technical and engineering matters.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Flexible and able to work well in a fast-paced environment.
• Ensure works carried out meet Company's quality standard and contractual requirements.

Job Summary:

As a Principal Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor Degree of any four years BS Engineering course preferably Mechanical Engineering or at least fifteen (15) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of twelve (12) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, five (5) years of which in a supervisory capacity.

Skill Requirements:

• Good Knowledge of AutoCAD.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

Interested parties, please send in your detailed resume.

Job Summary

Responsible for the execution of process design involving preparation of calculations and review of process design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

Duties & Responsibilities

• Lead a process team to carry out process design engineering work in feasibility studies, Front End Engineering Design (FEED) and detail engineering design.
• Act as Key Person to execute tender preparation, actual EPC/EPCm project execution.
• Generate project specifications, design philosophy, PFDs, P&IDs, calculations, operation manuals to comply with clients’ requirement.
• Carry out process simulations and develop heat and material balances.
• Carry out process design for reactors, columns, drums, heat exchangers, tanks and develop respective process datasheets.
• Carry out hydraulic design for pumps, compressors, blowers and develop respective process datasheets.
• Conduct and/or attend P&ID design reviews, HAZOP, IPF, SIL studies, 3D model reviews.
• Check design outputs, datasheets and drawings prepared by Process Engineers to ensure accuracy and completeness to design requirements and concepts.
• Support construction and commissioning activities at site.
• Coordinate with client, Project Team and other engineering departments and vendors.
• Monitor manhours and schedule for Process work and deliverables.
• Perform other functions that may be assigned by Department Manager.

Requirements

• Bachelor’s degree in Chemical Engineering.
• Minimum 10 years’ of experience.

Skill Requirements

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good knowledge in PRO/II, HYSYS, HTRI, AUTOCAD and Microsoft Office.
• Possess good communication and technical skills.
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports, international codes and standards.

Interested parties, please send in your detailed resume.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Civil and Environmental Engineering at the National University of Singapore (NUS) is looking to recruit a Research Engineer to work on a research project developing an application solution for structural BIM submissions. This project aims to develop a solution that automatically checks the compliance of structural BIM submissions against existing Singapore design codes.

The candidate is expected to work on designing the overall system, liaising with vendors, lead a team of interns, and developing advanced techniques to support the system.

Job Requirements

• Possess a recognised bachelor’s in engineering, or related field from a reputable university.
• At least a post-graduate diploma or degree in computing or related fields.
• At least one year’s experience in a software development role.
• Experience with using AWS Services, specifically AWS Amplify, Amazon S3, AWS Cognito, AWS AppSync, AWS Lambda, Amazon API Gateway, Amazon Elastic Container, AWS Serverless Application Model.
• Experience with NoSQL and Graph Databases specifically MongoDB and DynamoDB.
• Experience with Git and Git related automation workflows.
• Experience with developing Entity Relationship Diagrams, Activity Diagrams, Use Case Diagram, and relevant Software Development Life Cycle processes.
• Experience with CSS Frameworks, specifically Tailwind CSS.
• Experience with Building Information Modeling and Built Environment Related Solutions.
• Experience with “Three.JS” for 3D Model Viewer Development for Web Applications.
• Experience with “OpenBim Component” (Typescript Implementation).
• Strong knowledge on Industrial Foundation Classes Schema (IFC) and related OpenBIM Standards.
• Civil Engineering/Built Environment related experience, practices and workflows will be an added bonus.
• Strong written and oral communication skills and able to present results clearly.
• Open to fixed-term contract

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the Role

We are seeking a hands-on Senior Data Engineer to help us build out and manage our data infrastructure, which will need to operate reliably at scale using a high degree of automation in setup and maintenance. The role will involve setting up and managing the data infrastructure plus building new systems where required. Responsibilities will extend to building and optimizing key ETL pipelines on both batch and streaming data. The ability to work with the teams from product, engineering, BI/analytics and data science is essential. Ownership needs to be taken of data model design and data quality. The individual will also play active roles in ensuring data governance tooling is implemented and policies thereby adhered to.

The individual will also need to be able to work with technical leadership to make well informed architectural choices when required. A high degree of empathy is required for the needs of the downstream consumers of the data artefacts produced by the data engineering team, i.e. the software engineers, data scientists, business intelligence analysts, etc and the individual needs to be able to produce transparent and easily navigable data pipelines. Value should be assigned to consistently producing high quality metadata to support discoverability and consistency of calculation and interpretation.

Candidates should have a wide set of experience across the following platforms, systems, languages and capabilities:

• Ideally GCP, but strong experience in another platform such as AWS or Azure will suffice
• Event streaming platforms such as Kafka
• Stream analytics frameworks such as Spark, GCP Dataflow, etc
• Workflow scheduler such as Apache Airflow
• Cloud data warehouses such as c, Redshift or Snowflake
• Fluency in using Kubernetes, Python.
• Comfortable writing detailed design documents

What you will do:

The Senior Application Engineer is lead the team of application for technical support – primarily customer quotations and business development case studies for various composite applications. Key emphasis will be on the ability to understand customer requirements and rapidly demonstrate how composite based solutions can be utilized to provide solutions with costing, timing, and resources included in the proposals. This position will require travel with the business development team to customer facilities during visits to discuss these future opportunities in depth.

How you will do it:

• Lead the team of application Engineer with configuration, enhancement and support on technical write up and technical presentation to client
• Leads in the customization an additional of new features to Metasys software and internally developed applications according to end user requests
• Leads in designing and building new applications base on customer's requirements and specifications
• Leads and guide application engineers to write and perform tests on complicated programming, fixes problems as they arise and assists product launches
• Provide technical support and troubleshoots issue related to applications perform tests on complicated programming, fixes problems as they arise and assists product launches
• Provide assistance application Manager on process improvement on application to improve productivity and efficiency
• Work with SI and monitor their performance with QA/QC checks and completion sign off
• Leads and guide application engineers to perform software upgrades and keeps track of software licensing
• Assists with managing vendor relationships including scoping of application services and review of deliverables
• Work as part of a team of design and engineering and ops staff
• Knowledge of ACMV and controls associate with Johnson Control Metasys will be an advantage

To supervise Application Engineer on the their following Tasks

• Provides customer support by responding to requests for technical queries with detailed analysis of building management system, schedule of creation, tooling costing, and submittal of design and process improvements, when applicable, to meet all customer product needs.
• Works with engineering, sales, and ops staff to understand standard component fabrication techniques, standard composite materials to use, and current demands of our customers to formulate design details for the sales staff and our customers.
• Provides product technical engineering information by creating and giving presentations on customer proposals. This contains, but is not limited to, 3D representations of finished goods, 3D representations of tooling, etc.
• Prepares cost estimates by studying blueprints, plans, and related customer documents; consulting with engineers, and other professional and technical personnel.
• Conceptual design of composite components and assemblies to support proposals
• Generate proven and surface component and assembly CAD models
• Ability to compose detailed bill of materials for proposals

What we look for:

• Bachelor's Degree in Engineering and with minimum 5 years relevant working experience
• Transportation composite or other composite experience preferred
• Possess knowledge in PLC / BMS programming

The responsibilities includes the following:

· Design and Implementation

o Collaborate with stakeholders to design, plan, and implement VMware virtualization solutions based on business requirements.

o Deploy and configure VMware vSphere infrastructure, including ESXi hosts, vCenter servers, and associated components.

· Performance Optimization

o Monitor and optimize the performance of virtualized environments to ensure efficient resource utilization.

o Implement best practices for virtual machine performance tuning and optimization.

· Infrastructure Maintenance

o Conduct regular updates, patches, and upgrades to VMware software and related components.

o Perform routine maintenance tasks, ensuring the health and reliability of the virtualized infrastructure.

· Troubleshooting and Issue Resolution:

o Diagnose and resolve issues related to virtualization technologies promptly.

o Collaborate with cross-functional teams to troubleshoot complex problems and implement effective solutions.

· Security and Compliance

o Implement and enforce security measures to protect virtualized environments from potential threats.

o Ensure compliance with industry standards and security policies.

· Documentation

o Maintain comprehensive documentation of VMware infrastructure, configurations, and procedures.

o Develop and update standard operating procedures for virtualization-related tasks.

· Capacity Planning

o Conduct capacity planning assessments to anticipate future resource requirements.

o Propose and implement scalability solutions based on business growth.

· Collaboration and Training

o Collaborate with IT teams and stakeholders to ensure alignment with organizational goals.

o Provide training and knowledge transfer to IT staff on VMware best practices and usage.

(a) Education Qualification

1. Diploma or Degree in Computer Engineering, Computer Science or IT related discipline

(b) Relevant Experience

1. Possess relevant VMware Administration experience

2. Relevant IT certification such as VMware Certified Professional or similar is preferred

3. Possess Strong knowledge of IT systems and networking software, hardware, and networking protocols

4. Experience with the following technologies will be advantage:

a. Virtualization technologies - VMware Exsi, VCF , vRealize/Aria and NSX-T

b. Monitoring Tool: Cisco Solarwind Server and Application monitor

c. Familiarity with VxRail hardware platform

(c) Personal Characteristics & Behaviours

· Able to communicate clearly both verbally and written in English

· Willing to engage directly with business users on their IT systems infrastructure requirements

· Able to work with support teams from IT suppliers to resolve technical issues.

· Must be a team player willing to help their peers to deliver team goals together.

· Capable of preparing internal training materials and documentation.

· Flexible and able to adapt to a rapidly changing environment

· Positive, self-motivated, resourceful individual who can complete tasks independently

· Willing to stretch and learn other skillsets such as Linux for systems that the team may be supporting

· Willing to travel down to data centers and endpoint deployment sites when needed to support troubleshooting and remediation of issues, there will not be additional charges to PSA for such travel.

Job Summary

Responsible for the analysis and preparation of specifications and construction drawings, design documents for process and industrial plants in accordance with project specification schedule and customer requirements.

Duties & Responsibilities

• Responsible for field instrument and control system design work.
• Able to lead small/medium size project within budgeted MH, cost and project schedule.
• Prepare and review field instruments, Analyzer, Control Systems (DCS, ESD, F&G etc) specification, requisition, TBE, vendor document review.
• Prepare and review construction drawings such as Index, IO List, Location layout, hook-up, cable routing, loop diagram etc. based on project specifications.
• Evaluate and select suitable instruments for required process control/monitoring application.
• Lead the estimation work of BMBQ, Man-hour, technical proposal writeup, for new tender project.
• Preparation of project monthly report and attending project & client meeting as required.
• Work collaboration with other GEC and monitor daily job task assignment.
• Perform FAT/inspection for control system and field instruments as required.
• Perform SAT, Loop check, site construction and commissioning support as required.

Requirements

• Bachelor’s degree in Chemical Engineering, Electrical and Electronic Engineering or Instrument and Control Engineering.
• 15 years’ experience in instrument and control system design work.
• Knowledge and experience in Field Instrument Engineering as well as Control System, e.g. DCS, ESD, F&G.
• Able to work at construction site to support construction, pre-commissioning and commissioning activities.
• Good interpersonal and communication.

Interested parties, please send in your detailed resume.

Geekplus is a global leader in mobile robotics technologies, providing innovative solutions for order fulfillment. With over 1,000 industry leaders using our systems, we deliver flexible, reliable, and efficient automation for warehouses and supply chains. Founded in 2015, Geekplus has more than 1,500 employees and offices worldwide, including in the US, Germany, the UK, Japan, South Korea, Mainland China, Hong Kong SAR, and Singapore.

------------------------------

We are looking for an Implementation Engineer to join our team. Are you someone who is driven by curiosity and craves a good challenge? Join us and be part of this exciting adventure!

What you have to do

• Serve as the site supervisor, overseeing and conducting relevant site activities during project implementation in the APAC region
• Collaborate closely with project managers, contractors, and suppliers to manage overall site performance
• Prepare daily on-site logs and records for customer and internal team reviews
• During the service phase, conduct preventive maintenance and perform root cause analysis of production issues using diagnostic tools
• Prepare a training manual and provide training and support to customers and other external parties

What you need to have

• A bachelor's degree in mechanical engineering or related disciplines
• Solid experience in equipment/hardware installation, maintenance, and site supervision
• Knowledge of Warehouse Management Systems, ERP, or other related logistics systems is a plus
• Proficiency in AutoCAD and Microsoft Office
• Good IT skills, including knowledge of network infrastructure, is a plus
• Frequent travel may be required

------------------------------

What we offer

• Young and energetic work culture
• Opportunities for global mobility
• Double pay plus attractive performance bonuses
• Medical and dental coverage
• 14 to 21 days of annual leave
• Cozy office environment with refreshments
• Location: Tampines Plaza

If your qualifications, experience, and aspirations match our requirements, please send your resume, along with your current and expected salary, to us. All information and materials submitted will remain strictly confidential and will be treated for recruitment purposes only. Only shortlisted candidates will be notified.

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and having great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multi-cultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Job Summary

Responsible for the analysis and preparation of specifications and construction drawings, design documents for process and industrial plants in accordance with project specification schedule and customer requirements.

Duties & Responsibilities

• Responsible for field instrument and control system design work.
• Able to lead small/medium size project within budgeted MH, cost and project schedule.
• Prepare and review field instruments, Analyzer, Control Systems (DCS, ESD, F&G etc) specification, requisition, TBE, vendor document review.
• Prepare construction drawings such as Location layout, hook-up, cable routing, loop diagram etc. based on project specifications.
• Generate specification requisition for various process instruments, evaluate and select suitable instruments for required process control/monitoring application.
• Preparation of technical proposals (e.g. TBE) and cost estimation for tender projects.
• Preparation Vendor’s Document Review, BMBQ, Man-hour estimation and related.
• Engineering Support at site, attend Field Instrument & Control Inspection, FAT at vendor’s workshop and SAT & Loop Check at site.
• Perform other functions that may be assigned by superior.

Requirements

• Bachelor’s degree in Chemical Engineering, Electrical and Electronic Engineering or Instrument and Control Engineering.
• 8 years’ experience in instrument and control system design work.
• Knowledge and experience in Field Instrument Engineering as well as Control System, e.g. DCS, ESD, F&G.
• Able to work at construction site to support construction, pre-commissioning and commissioning activities.
• Good interpersonal and communication.

Interested parties, please send in your detailed resume.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Civil and Environmental Engineering at the National University of Singapore (NUS) is looking to recruit a Research Engineer to work on a research project developing an application solution for structural BIM submissions. This project aims to develop a solution that automatically checks the compliance of structural BIM submissions against existing Singapore design codes.

The candidate is expected to work on designing the overall system, liaising with vendors, lead a team of interns, and developing advanced techniques to support the system.

Job Requirements

• Possess a recognised bachelor’s in engineering, or related field from a reputable university.
• At least a post-graduate diploma or degree in computing or related fields.
• At least one year’s experience in a software development role.
• Experience with using AWS Services, specifically AWS Amplify, Amazon S3, AWS Cognito, AWS AppSync, AWS Lambda, Amazon API Gateway, Amazon Elastic Container, AWS Serverless Application Model.
• Experience with NoSQL and Graph Databases specifically MongoDB and DynamoDB.
• Experience with Git and Git related automation workflows.
• Experience with developing Entity Relationship Diagrams, Activity Diagrams, Use Case Diagram, and relevant Software Development Life Cycle processes.
• Experience with CSS Frameworks, specifically Tailwind CSS.
• Experience with Building Information Modeling and Built Environment Related Solutions.
• Experience with “Three.JS” for 3D Model Viewer Development for Web Applications.
• Experience with “OpenBim Component” (Typescript Implementation).
• Strong knowledge on Industrial Foundation Classes Schema (IFC) and related OpenBIM Standards.
• Civil Engineering/Built Environment related experience, practices and workflows will be an added bonus.
• Strong written and oral communication skills and able to present results clearly.
• Open to fixed-term contract

Responsibilities:

- Design and implement integration solutions for various physical security systems, including access control, video surveillance, intrusion detection, video analytics and alarm systems

- Ability to understand and address customer requirements and translate them into technical solutions

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Collaborate with cross-functional teams to gather requirements and define project scope

- Conduct site surveys and assessments to determine integration needs and best practices

- Conduct POC, demo, testing and setup of security system and video analytics

- Manage and execute projects with strong project management skills

- Develop documentation, including system specifications, integration plans, and user manuals

- Stay updated on industry trends, technologies, and best practices related to physical security

Requirements:

- Bachelor’s degree in Computer Science, Engineering, or a related subject

- Programming skills in Python, C++ and/or Javascript

- Fullstack experience is strongly preferred

- Strong understanding of networking, database management, and software integration

- Familiarity with industry standards and protocols (e.g., ONVIF, BACnet, etc.)

Nice to have:

- Professional experience working with VMS systems and integrating 3rd party solutions

- B2B (Business-to-Business) experience in physical security

- Technical security system certifications (I.e., Gallagher, Genetec, BICSI, Milestone) and/or related IT (i.e., CCNA) certifications preferred

- Possess market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

Meet the Team

As part of our team, you’ll work on groundbreaking technologies that impact the world, from products that simplify home automation and address medical issues to solutions that reduce energy waste and enable sustainable infrastructure.  You will also be supported by a team that values learning from each other and helping one another succeed.

This role will develop test strategies for ICs, including improvement of existing production test solutions. Role will also be involved in yield improvement and costs reduction while maintaining excellent product quality.

Responsibilities

• Support Test Solution Improvement for Cost Reduction, and Yield Improvement
• Support Tester or Handler platforms migration to attain low test cost and address test setup capacity constraints.
• Responsible for “Technical Product and Test Knowledge” required to guide internal team
• Provide best-in-class test program and product quality.
• Provide remote debug and technical support to offshore factory sites to resolve any Test Solution Related Issue
• Integrate test instruments or test screen from bench setup into test program.

Skills You Will Need
Minimum Qualifications:

• EE / Computer Engineering Bachelor with minimum 10 years of relevant working experience or Master Degree with reduced experience required.
• Work experience in a semiconductor preferably as a Test Engineer or Test Development
• Manufacturing/Sustaining PTE Qualification
• Strong understanding of ATE Test Programming principles, with experience in RF, Mixed-Signal or MCU testing
• Must have experience with industry standard Automated Test Equipment – Teradyne (Flex, J750) preferably, and other Mixed Signal or RF testers
• Test Program development experience & skills, including knowledge of C/C++, VB, MCU Assembly Language, PERL, Python, Scripting
• Advanced Bench Equipment Skills/ IC Application knowledge.
• PCB Hardware design knowledge & RF signal process trouble shooting skills.
• Good PCB Assembly and soldering skills
• Excellent team working ability as self-motivation, innovation, and individual contribution
• Able to mentor and provide training for internal team
• Demonstrable good project management and communication skills

Benefits & Perks:
You can look forward to the following benefits:

• Employee Stock Purchase Program (ESPP)
• Medical and dental insurance coverage including spouse and child(ren)
• Bi yearly health screening and flu vaccination
• Office location is above Tai Seng MRT station

Duty and Responsibility

• The Procurement Engineer investigates the market with specifications and performance requirements for Water/Wastewater Treatment Plants and products,
• Analyzes technical and commercial data based on the responses received, re-iterates with bidders, recommending those most desirable using tools like bid comparison tables/BOQs.
• On approval, the Procurement Engineer issues the Purchase Order, tracks and expedites the supply, handles Inspections and delivery to site.
• The Procurement Engineer also provides assistance in supplier-site co-ordination for site handling, storage installation and commissioning.

Requirement

• Good communication skills to liaise with associates and government authorities.
• Good team player

Job Description

· Control and communicate with batching plant for concrete works.

· Site quality inspection for any on-going works at all locations for concrete works.

· Off-site and On-site quality inspection for Structural Steel works.

· Lead and supervise QC inspectors providing guidance and support to meet quality standards while overseeing daily QC inspection activities.

· Maintenance and calibration of measuring equipment.

· Document inspection results by completing reports and logs.

· Summarizing rework and waste.

· Inputting data into a quality database.

· Maintain a safe and healthy working environment by following standards and procedures; and complying with legal regulations

· Perform any other related duties as assigned by QAQC Manager.

Requirements

· Certificate/ITE/NITEC/ Higher NITEC in QC/ Precision Engineering or equivalent.

· Minimum 5 years relevant experience in QC Civil & Structural for LTA projects

· Ability to read and interpret drawings with a good understanding of geometric dimension and tolerance.

· Team player with a dependable attitude.

Job Description

• In charge of the continuous development, improvement and maintenance of log-in & account system, including both Garena Open Platform and third party platforms authentication.
• In charge of the continuous improvement, maintenance and new payment channel integration into the payment system, including both topup from Garena payment website and in-game top up.
• Lead system design and architecture improvement for higher stability, performance and reliability of our products.
• Collaborate with other software engineers, product managers and QA engineers to ensure the functionality and seamless user experience.

Job Requirements

• Bachelor’s degree or higher in Computer Science, Information Systems or related fields.
• Minimum 3 years of working experience as a Backend Engineer or equivalent, preferably from Internet/Technology industry.
• Proficient in the following languages and practice on a regular basis: Go, Python, SQL; Knowledge and experience in Docker and/or Kubernetes (k8s) is preferable.
• Familiar with HTTP protocol, performance tuning of Web Server, massive concurrency handling, and caching mechanisms.
• Deep understanding of computer architectures, data structures and algorithms.
• Experience in designing and developing large-scale, high-throughput systems.
• Good communication skills, problem-solving skills and logical thinking.
• Possess an open-minded, agile, and proactive mindset with strong willingness to learn.
• Possess good team communication and collaboration skills.
• Possess good responsibility and accountability in delivering quality work on time.

• Position : Project Engineer -HVAC/ACMV
• Working hours : Monday to Friday , 8.30am to 5.30pm
• Location: Office in Boon Lay-Islandwide
• Salary (commensurate with experience) : Up to $5500 + AWS + Minimum 2 months Variable Bonus (max up to 5 MONTHS BONUS) + 16 days Annual Leaves + Medical Benefits
• Duration : 2 years contract renewable or convertible
• Industry : Refrigerating, Air-conditioning & Ventilation Machinery - MNC

Main responsibilities :

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required.
• Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
  HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
• Stop the work if any unsafe conditions are identified.

Requirement:

• Experience in IO point schedules, assignments and materials selection with value engineering
• Project management skill required.
• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent
• Min 2 years related experience in HVAC/ BAS industry
• Understanding of PLC (eg. Siemens/Allen-Bradley)

Email to [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Summary

The Apple Services Engineering (ASE) team is one of the most exciting examples of Apple's long-held passion for combining art and technology. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, Fitness+ and Apple Books. And they do it on a massive scale, meeting Apple's high expectations with dedication to deliver a huge variety of entertainment in over 35 languages to more than 150 countries. These engineers build secure, end-to-end solutions. They develop the custom software used to process all the creative work, the tools that providers use to deliver that media, all the server-side systems, and the APIs for many Apple services. Thanks to Apple's unique integration of hardware, software, and services, engineers here partner to get behind a single unified vision. That vision always includes a deep dedication to strengthening Apple's privacy policy, one of Apple's core values. Although services are a bigger part of Apple's business than ever before, these teams remain small, nimble, and cross-functional, offering greater exposure to the array of opportunities here.

Description

As an SRE at Apple, you will work on world-renowned internet services that serve hundreds of millions of users worldwide. You’ll collaborate closely with development teams and other stakeholders in the entire lifecycle of services from inception through deployment and continuous refinement. Your responsibilities will include monitoring performance and availability, capacity and disaster recovery planning, defining Service Level Objectives (SLO) and ensuring the reliability and resiliency of systems. Join us if you thrive on solving large-scale problems through your expertise and collaborative team work. - Support and lead cross functional projects across multiple services - Design, analyze and troubleshoot complex mission-critical distributed systems on a global scale. - Provide OnCall support to 1st level production support teams. - Participate in incident management and blameless postmortems. - Detect and resolve performance bottlenecks, enhance service efficiency. - Write clear technical documentation, production run books. Apple is an Equal Opportunity Employer that is committed to inclusion and diversity. We also take affirmative action to offer employment and advancement opportunities to all applicants, including minorities, Women, protected veterans, and individuals with disabilities. Apple will not discriminate or retaliate against applicants who inquire about, disclose, or discuss their compensation or that of other applicants. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation

Minimum Qualifications

• BS degree in computer science or equivalent field with 5+ years or MS degree with 3+ years experience, or equivalent.
• At least 5 years in a Site Reliability Engineering, DevOps or infrastructure focused role
• Excellent written and verbal communication skills
• Experience in supporting internet-facing production services and distributed systems
• Experience in collaborating effectively across organizations, building strong relationships
• Proficient coding experience with Python or similar scripting languages
• Experience with containers and container orchestration platforms such as Docker and Kubernetes
• Experience with monitoring tools such as Splunk, Grafana, and Prometheus
• Demonstrated ability to deliver results on time with high quality
• Experience in managing and scaling distributed systems in a public, private, or hybrid cloud environment
• Experience in debugging Java code and optimizing JVM performance is plus.
• Understanding of the Linux Operating System, standard networking protocols, and components

Preferred Qualifications

• Passion for crafting and building reliable systems
• Strong sense of ownership and integrity proven through clear communication and collaboration
• Automation advocate - you truly believe in removing operation load with software
• Excellent troubleshooting and problem solving skills

The candidate is part of the Data Loss Prevention (DLP) project and operation team. He/she will be reporting to the DLP Team Lead and be assigned with project and operational work and responsibilities which includes but not limited to, processing requests, investigate operational issues and facilitate security investigation by providing the necessary information in accordance with approved policy and procedures as well as process improvement.

• Diploma/Degree in Computer Science, Engineering or equivalent
• At least 5-6 years of experience in IT Incident Management, DLP Operations or SOC
• Good team player as well as strong communications skills
• Strong analytical skills and ability to work independently

The Government Technology Agency (GovTech) is the lead agency driving Singapore’s Smart Nation initiatives and public sector digital transformation. As the Centre of Excellence for Infocomm Technology and Smart Systems (ICT & SS), GovTech develops the Singapore Government’s capabilities in Data Science & Artificial Intelligence, Application Development, Smart City Technology, Digital Infrastructure, and Cybersecurity.

At GovTech, we offer you a purposeful career to make lives better. We empower our people to master their craft through continuous and robust learning and development opportunities all year round. Our GovTechies embody our Agile, Bold and Collaborative values to deliver impactful solutions.

GovTech aims to transform the delivery of Government digital services by taking an "outside-in" view, putting citizens and businesses at the heart of everything we do.

Play a part in Singapore’s vision to build a Smart Nation and embark on your meaningful journey to build tech for public good. Join us to advance our mission and shape your future with us today!

Learn more about GovTech at tech.gov.sg.

Digital Design & Development (DCube) is a team in GovTech that seeks to design and develop software applications that help government agencies to better serve the needs of the people of Singapore. To that end, we employ an agile approach towards development, and work towards adopting the best practices and tools used in the top technology companies and organizations.

We are now looking for a top-notch Salesforce developer to join us in this mission, designing world class Salesforce applications for Service Cloud. You will be responsible to gather project requirements, analyse project objective/goal in order to create customer workflows and troubleshoot errors, eventually to create dynamic and scalable Salesforce applications that meet the changing needs of the project.

[What you will be working on]

Work within an agile development team to deliver high-quality software applications according to requirements. This may include:

• Collaborating with stakeholders to validate business requirements,
• Developing Apex classes & triggers to support business needs and custom user interface development
• Using Salesforce APIs to integrate with 3rd party systems and integrate with WoG components/services
• Adhering to Salesforce best practices with proper documentation.

[What we are looking for]

Development/Customization Experience

• Apex development
• Visualforce page development.
• Lighting components development.
• Experience in 3rd party API integrations.
• Experience with data migration through other CRM eg. data loader.

Configuration Experience

• Hands-on configuration experience in administration setup, eg., managing org, users, profiles, roles, security controls, data & support processes configuration.
• Experience in designing custom objects, custom fields, picklists, page layout, workflow, approval processes, validation rules & flow.
• Experience in report & dashboard configuration.
• Experience with OmniStudio & Omniscript will be a bonus.

• Able to work independently
• Good problem solving skills and able to provide optimal solutions.
• Ability to communicate effectively with customers/business stakeholders and provide consultation on Salesforce solutions.
• Certified Salesforce Platform Developer
• Minimum of 5 years of Salesforce development experience, especially with Service Cloud.

GovTech is an equal opportunity employer committed to fostering an inclusive workplace that values diverse voices and perspectives, as we believe that diversity is the foundation to innovation.

Our employee benefits are based on a total rewards approach, offering a holistic and market-competitive suite of perks. These include leave benefits to meet your work-life needs and employee wellness programmes.

We champion flexible work arrangements (subject to your job role) and trust that you will manage your own time to deliver your best, wherever you are, and whatever works best for you.

Learn more about life inside GovTech at go.gov.sg/GovTechCareers.

Stay connected with us on social media at go.gov.sg/ConnectWithGovTech.

The Government Technology Agency (GovTech) is the lead agency driving Singapore’s Smart Nation initiatives and public sector digital transformation. As the Centre of Excellence for Infocomm Technology and Smart Systems (ICT & SS), GovTech develops the Singapore Government’s capabilities in Data Science & Artificial Intelligence, Application Development, Smart City Technology, Digital Infrastructure, and Cybersecurity.

At GovTech, we offer you a purposeful career to make lives better. We empower our people to master their craft through continuous and robust learning and development opportunities all year round. Our GovTechies embody our Agile, Bold and Collaborative values to deliver impactful solutions.

GovTech aims to transform the delivery of Government digital services by taking an "outside-in" view, putting citizens and businesses at the heart of everything we do.

Play a part in Singapore’s vision to build a Smart Nation and embark on your meaningful journey to build tech for public good. Join us to advance our mission and shape your future with us today!

Learn more about GovTech at tech.gov.sg.

We are now looking for a top-notch Salesforce developer to join us in this mission, designing world class Salesforce applications for Service Cloud and/or Public Sector solutions. You will be responsible to gather project requirements, analyse project objective/goal in order to create customer workflows and troubleshoot errors, eventually to create dynamic and scalable Salesforce applications that meet the changing needs of the project.

What you will be working on:

Work within an agile development team at the Ministry of Social Development & Family (MSF) to modernise and develop the SSNet (Social Service Net) system. This may include:

• Collaborating with stakeholders to validate business requirements
• Developing Apex classes & triggers to support business needs and custom user interface development
• Using Salesforce APIs to integrate with 3rd party systems and integrate with WoG components/services
• Adhering to Salesforce best practices with proper documentation

What we are looking for:

Development/Customization Experience

• Apex development
• Visualforce page development
• Lighting components development
• Experience in 3rd party API integrations
• Experience with data migration through other CRM eg. data loader

Configuration Experience

• Hands-on configuration experience in administration setup, eg., managing org, users, profiles, roles, security controls, data & support processes configuration
• Experience in designing custom objects, custom fields, picklists, page layout, workflow, approval processes, validation rules & flow
• Experience in report & dashboard configuration
• Experience with OmniStudio & Omniscript will be a bonus
• Able to work independently
• Good problem solving skills and able to provide optimal solutions
• Ability to communicate effectively with customers/business stakeholders and provide consultation on Salesforce solutions
• Certified Salesforce Platform Developer
• Minimum of 5 years of Salesforce development experience, especially with Service Cloud

GovTech is an equal opportunity employer committed to fostering an inclusive workplace that values diverse voices and perspectives, as we believe that diversity is the foundation to innovation.

Our employee benefits are based on a total rewards approach, offering a holistic and market-competitive suite of perks. These include leave benefits to meet your work-life needs and employee wellness programmes.

We champion flexible work arrangements (subject to your job role) and trust that you will manage your own time to deliver your best, wherever you are, and whatever works best for you.

Learn more about life inside GovTech at go.gov.sg/GovTechCareers.

Stay connected with us on social media at go.gov.sg/ConnectWithGovTech.

• Position: Service Technician/Engineer (Measurement/Instrument/Electronic)
• Location: Ang Mo Kio - Few bus stops from Ang Mo Kio MRT
• Working hours: 5 days work week, Monday to Friday 9.00am to 6.00pm
• Salary (commensurate with experience): Up to basic $4500 + $800-$1000 Transport allowance + 10 days Annual Leave + Variable Bonus + Phone Allowance
• Duration: Permanent
• Industry: Test & Measurement Equipment

Main Responsibilities:

• Provide technical support to customer.
• Perform Troubleshooting, Installation, commissioning, testing and repair of test & measuring instruments
• Assist in all sales and technical support activities.

Requirements:

• Minimum ITE Higher NITEC/Poly Diploma in Electrical & Electronic Engineering or equivalent
• Minimum 1-2 years related experience
• Candidate without experience is welcome to apply, full training provided
• PC Literate
• Bilingual in English and Mandarin to liaise with Chinese speaking clients who converse in Mandarin only

Email me at [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Engineer (Electronics)

Monthly basic salary: $3200 - $4500

Responsibilities:

· Technical transfer product/project in assembly and testing, and from customers

· Provide technical support in manufacturing and testing in product build

· Provide technical support to QC in RMA issue

· Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

· Minimum Diploma in Electronics Engineering

· At least 2 years of relevant work experience in Electronics Manufacturing industry

· Technical competent to handle product/project manufacturing, transfers and troubleshooting

· Experience in product/project, PCBA manufacturing and testing

· Able to liaise with customer on technical matters

· Experience in manufacturing environment with ISO13485 & FDA preferred

· Good communication and problem-solving skills

· Medical product experience and Quality Management System exposure preferred

If you are keen to apply for this role, please click auto-apply

HRLinked Asia Search & Consultancy Pte Ltd (Registration No: 201910702W)