Responsibilities:

 1. Involved in SDLC processes like requirement

analysis, designing, coding , testing ,releasing, and providing

maintenance

 2. Fixed point auto code generation for production purposes of the system-level testing

 3. Experienced in writing and analyzing systems requirement

documents and usee test cases , preparing test logs and summary

reports

 4. Checking daily WIP calculations and updating the monthly machine status

 5. Identified and addressed technical issues in a timely and efficient manner

 6. Perform wire bond sub-module assembly, set-up, and calibration to meet the

in-house specifications

 7. Conduct testing strength of bonded connections, using testing equipment reports

 8. Designed, implemented, and tested modular components for printer

firmware

 9. Discovered, investigated, and found solutions for problems in OS and

compiler

10. Development on Linux Platform with Embedded C user side of RTOS

11. Assisted QA in developing meaningful testcases.

Excellent numeracy and analytical skills

12.In-depth scientific knowledge

13.Good problem-solving skills

14.Good communication and interpersonal skills

15.Good technical skills

16.Able to work and be stationed overseas

17.Flexible working hours.

Qualifications:

• Master’s degree in a related field
• Proficient in C++ and other object-oriented programming languages
• Analytical and logical thinking
• Strong problem-solving skills
• Ability to work without supervision

Technical skills:

•  Advanced Microcontrollers
•  Analog Circuits
•  Embedded Systems(Embedded C,Keil IDE,Proteus)

Job description

In your new role you will:

• Team up with multi- disciplinary teams to drive automation projects completion to meet strategic objectives
• Collaborate with cross functional teams to understand requirements and translate them into technical specifications
• Responsible for participating in FAT and interface testing to ensure implemented solution meets regulatory requirements and Good Manufacturing Practices (GMP)
• Identify opportunities for automation optimization and efficiency improvements
• Drive continuous improvement initiatives to enhance automation capabilities, efficiency and cost effectiveness
• Utilize advanced machine learning techniques to enhance decision making and execution capabilities of the robots, thus optimizing the overall intelligence of the system
• Monitor and optimize navigation of autonomous robots and path algorithms to achieve maximum efficiency

Your Profile

You are best equipped for this task if you have:

• Bachelor’s/Master Degree in Industrial/Manufacturing/Mechanical/Mechatronics Engineering with more than 5 years of relevant experience, preferably in the semiconductor industry
• Strong grasp of Python, Perl, C++, HTML, Linux, SQL and Tableau skills preferred
• Good knowledge in factory automation and Industry 4.0 requirements will have an added advantage
• A strong team player with excellent communication skills and project management experience
• Excellent problem solving, analytical and organizational skills with desire to initiate improvements
• Certified in Six Sigma, Lean Manufacturing or possesses experience in applying DMAIC principles will have distinct advantage

Benefits

What we offer you in Singapore

Singapore is our regional headquarter for Asia-Pacific and consists of production, research & development, sales & marketing, supply chain and many central functions.

Find out more about our location Singapore

Why Us

Driving decarbonization and digitalization. Together.

Infineon designs, develops, manufactures, and markets a broad range of semiconductors and semiconductor-based solutions, focusing on key markets in the automotive, industrial, and consumer sectors. Its products range from standard components to special components for digital, analog, and mixed-signal applications to customer-specific solutions together with the appropriate software.

We are on a journey to create the best Infineon for everyone.
This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant´s experience and skills.
Please let your recruiter know if they need to pay special attention to something in order to enable your participation in the interview process.
Click here for more information about Diversity & Inclusion at Infineon.

Job description

In your new role you will:

• Responsible for a portfolio of IC products to support increasing volume in Infineon.
• Responsible for Continuous Backend Yield Monitoring, Cost Reduction & Quality Improvement.
• Implement Statistical Part Average Testing, Dynamic PAT & Advanced Maverick Screening Methodologies on Non Turnkey parts in Infineon.
• Develop Metrics to Monitor In-line Process & Final Test performance monitoring.
• Work to develop Data Automation Roadmap to enable tools to improve Product Engineering job efficiency & analytics capabilities.
• Work with Product Engineering Tools team to deliver new and efficient tools for Product Engineers (PE).
• Be a Data Analysis Subject Matter expert in APAC region & deliver training to Infineon, Product & Test Engineering.

Your Profile

You are best equipped for this task if you have:

• Bachelor Degree or Master Degree in Computer Science, Data science or Statistics or Electrical engineering, Electronic, Microelectronics.
• More than 4 years' experience in Advanced Data Analysis and/or Product Engineering background dealing with Power devices (IC, MCM etc.) in High Volume manufacturing.
• Excellent people leadership skills, good team player with good interpersonal skills.
• Experience in data tools such as JMP, Spotfire, CEDA, Galaxy Examinator, KNIME. (Data analytic & tools)
• Knowledge of advanced scripting languages such as SQL, R, Python and advanced graphing & visualization, advanced statistics & modelling.
• Knowledge of Machine Learning Knowledge is a plus.
• Candidate with strong experience may be consider for Lead Principal position

Benefits

What we offer you in Singapore

Singapore is our regional headquarter for Asia-Pacific and consists of production, research & development, sales & marketing, supply chain and many central functions.

Find out more about our location Singapore

Why Us

Driving decarbonization and digitalization. Together.

Infineon designs, develops, manufactures, and markets a broad range of semiconductors and semiconductor-based solutions, focusing on key markets in the automotive, industrial, and consumer sectors. Its products range from standard components to special components for digital, analog, and mixed-signal applications to customer-specific solutions together with the appropriate software.

We are on a journey to create the best Infineon for everyone.
This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant´s experience and skills.
Please let your recruiter know if they need to pay special attention to something in order to enable your participation in the interview process.
Click here for more information about Diversity & Inclusion at Infineon.

Supervision of works at site in accordance with the design

• Preparation and maintenance of daily report / record

• Check and conduct inspections on works performed by subcontractors / gangs

• Check all construction drawings / sketches received on site and to report any discrepancy to the Project Manager

• Handle all problems arising from the project

• Preparation of progress report for the Client / Consultants

• Work in conjunction with the Project Manager and Safety Supervisor to keep the site safe and tidy

• Co-ordinate the handing over of completed works to the Client / Consultants and completion of the necessary rectification works

• Submission of as-built drawings at the end of the project

Civil engineers create, improve and protect the environment in which we live. They plan, design and oversee construction and maintenance of building structures and infrastructure, such as roads, railways, airports, bridges, harbours, dams, irrigation projects, power plants, and water and sewerage systems.Civil engineers plan, design, and supervise the construction and maintenance of building and infrastructure projects. These projects may include facilities, bridges, roads, tunnels, and water and sewage systems.

Supervision of works at site in accordance with the design

• Preparation and maintenance of daily report / record

• Check and conduct inspections on works performed by subcontractors / gangs

• Check all construction drawings / sketches received on site and to report any discrepancy to the Project Manager

• Handle all problems arising from the project

• Preparation of progress report for the Client / Consultants

• Work in conjunction with the Project Manager and Safety Supervisor to keep the site safe and tidy

• Co-ordinate the handing over of completed works to the Client / Consultants and completion of the necessary rectification works

• Submission of as-built drawings at the end of the project

We are Generative AI team under Monetization Technology. Our team focuses on developing cutting-edge Generative AI techs across all modalities, including text, image, videos, landing pages, etc., and creates industry-leading technical solutions to improve creative efficiency for advertisers, agencies and creators. We are committed to automated creative workflows by leveraging Generative AI technologies, to increase overall revenue for advertisers, agencies and creators.

We aim to drive and lead the generative AI in the ads tech and creative industry, powering products and driving values for our clients, creators, and the whole ecosystem. We are looking for ML engineers who are excited to grow their business understanding, build highly scalable and reliable software/infrastructure, partner across functions with global teams, and make big impacts. If you are someone who welcomes challenges, we are eager to have you on the team!

Descriptions:

• Develop and implement AI-driven applications for text-to-image and text-to-video transformations to support diverse content generation needs.
• Design and enhance robust multi-GPU systems for the efficient training and deployment of large-scale generative models.
• Work closely with cross-functional teams to improve the platforms that support our AI models, focusing on performance optimization and reduction of latency in model training and deployment.
• Stay updated with the latest industry and academic developments in generative AI to integrate state-of-the-art technologies and methodologies into our operations.

Requirements:

• Bachelor in Arts, Music, Computer science, or related fields.
• Proven experience in generative models, especially in text-to-image (e.g., Diffusion-Based Models, Diffusion Transformers) and text-to-video (e.g., EMU series, MagViT) technologies.
• Developer will be assigned for the role to assist for Tech part.

Responsibilities:

• Coordinate and supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical or in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and a team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

We are Generative AI team under Monetization Technology. Our team focuses on developing cutting-edge Generative AI techs across all modalities, including text, image, videos, landing pages, etc., and creates industry-leading technical solutions to improve creative efficiency for advertisers, agencies and creators. We are committed to automated creative workflows by leveraging Generative AI technologies, to increase overall revenue for advertisers, agencies and creators.

We aim to drive and lead the generative AI in the ads tech and creative industry, powering products and driving values for our clients, creators, and the whole ecosystem. We are looking for ML engineers who are excited to grow their business understanding, build highly scalable and reliable software/infrastructure, partner across functions with global teams, and make big impacts. If you are someone who welcomes challenges, we are eager to have you on the team!

Descriptions:

• Work on projects involving natural language processing and deep learning.
• Develop models for image recognition, speech processing, or cross-modal applications.
• Use mainstream deep learning frameworks like TensorFlow or PyTorch.
• Write clean and efficient code in Python.
• Stay updated on new AI technologies and trends.

Requirements:

• Bachelor's degree or higher in Computer Science, Artificial Intelligence, Machine Learning, Statistics, or related fields.
• Strong understanding of deep learning principles and natural language processing.
• Experience in machine learning projects is required.
• Proficiency in Python programming.
• Familiarity with deep learning frameworks.
• Strong interest in exploring new AI technologies and trends.

Job description
In your new role you will:

• Develops new and/or enhances existing technical systems/processes (whole systems, parts, components).
• These can either be software and/or hardware as well as various products.
• Responsible for development planning and development strategy in close collaboration with other functions (e.g. marketing, operations).
• Apply research based on scientific methods, e.g. for quality improvement, process optimization, new products or business areas.
• Manages new product introduction and production support engineering for a specific product or group of products (in particular XENSIV™ MEMSmicrophone family of products)

New Product Introduction:

• Work alongside with Technical Marketing colleagues to successfully introduce new products into the production line (Focusing on BE test; Knowledge in Packaging would be added benefit)
• Work with the Project Manager to ensure key project milestones are met in accordance to the defined project schedule
• Work alongside the Engineering Team to address issues that arise. Lead discussion with the Product Development team to propose mitigation.
• Support successful transfer from design to in-house or outsourced production.

Production Support:

• Interfaces with design, process, test, reliability and manufacturing engineering to solve product issues and production problems in terms of yield, stability and quality.
• Develops and sustains process improvements to reduce production costs and increase yields.
• Adopt advanced data analysis techniques (e.g. data visualization, machine learning) in production support.
• Innovate ideas for next level of productivity through the adoption of automation in data analysis/visualization.
• Apply innovations across the entire product family (where possible)

Your profile
You are best equipped for this task if you have:

• A Bachelor/Masters Degree in Electronic/Electrical Engineering.
• 9+ years relevant working experience in the role/responsibility described above.
• Experience in managing acoustic products (e.g. MEMS Microphone) is an added advantage.
• A strong understanding of how an acoustic product (e.g. MEMSMicrophone) is tested will be an added advantage.
• Strong knowledge in statistical methods used in production support is required. Able to demonstrate the ability in data visualisation, analysis and automation.
• The candidate must demonstrate proficiency in C++ and Python programming language.
• The candidate must demonstrate the ability to communicate in English/Chinese to deal with business stakeholders in China.
• He/She must be self-motivated, innovative and persistent to own/manage the product family throughout its life cycle.

Siemens Smart Infrastructure is growing! We are currently searching for an experienced System Engineer to support our Building Management and Building Performance group in Singapore.

This position is responsible for the design of Integrated Building Management systems using company tools and operating protocols..

Responsibilities include:

• Receives project specifications from Project Manager and designs Building management system jobs.

• Chooses the appropriate mix of products and installation methods to provide the most cost effective solution.

• Prepares all required submittals and schedules subsequent hand-off to operations.

• Acts as a technical resource to team and customer as needed.

• Participates in sales to operations handover meetings to evaluate accuracy of the sales estimate and job layout.

• May participate in initial job site walk through with contractors and/or clients.

• Independently designs Building management systems for standard and/or critical environment facilities

• May need to create unique design solutions to meet specific customer/consultant requirements.

• Designs the integrated Building systems consisting layouts, bill of materials, sequence of operations, control panel layouts to meet the intent of the project plans, specifications and contract documents.

• Designs mainly BMS network architecture to support operator workstations, Servers, third-party integration devices connected through Ethernet, BACNET etc.

• Able to set up/comission Servers / work stations / gateways or any interfacing devices related to BMS.

• Analyzes plans, construction contract specifications and codes to determine project requirements and risks.

• Provides start-up and checkout documentation to the Project Manager and system specialist for use in commissioning and validation. Responsible for Contract / Client Management and finalize the reason for the project delays and submit report to Project Manager.

• Prepares engineering re-estimate and follows up with appropriate sales and management to assure understanding of and satisfaction with job scope.

• Prepares specifications and drawings for special components and panels purchased from outside suppliers.

• Selects proper types and sizes of company products and outside suppliers to meet project requirements.

• Prepares all information on pre-installation extras or change orders to submit to customer or subcontractor.

• Oversees the creation of system graphics.

• Ensures the job folder is organized and maintained including all pertinent job related information.

• Perform all site commissioning or troubleshooting activities as required.

• Able to particiate site commissioning , inspection activities as required.

• Able to perform trouble shooting and problem solving

• Maintain high level knowledge related to Building Management systems and other interfacing systems or protocols.

• Able to understand or knowledge on the Control logic with HVAC, Electrical and IT or Networking.

• Able to Co-ordinate with the concerned Project Engineer and obtain final DPS, Panel Drawings, Sequence of operations etc. along with the technical brief.

• Able to work to any assigned projects

Qualifications Include:

• Bachelor’s Degree preferred, although an Associate’s Degree/Certification in HVAC or other technical field along with equivalent experience will also be considered.

• 3 years engineering experience preferred, in PLC

• Strong knowledge of industry engineering fundamentals and business operations required.

• Proficiency in Modbus, BacNet, API, IT networking and PLC will be a plus

• Proficiency in programming, job start-up, commissioning and troubleshooting preferred.

• Good verbal and written communication skills.

• Fully proficient and independent design skills.

• Able to design medium to large jobs with deviation from standard tools, products or practices as needed.

We are an equal opportunity employer and value diversity at our company.

We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, or disability status

Transmission Engineer

Responsibilities:

· Responsible for Huawei networking products after-sales support and network solution reviewing.

· Require to provide low level network solution/design to local office/channel partner/key account customers.

· Require to work as a team with either regional/HQ or local team.

· Require to work under minimum supervision to complete tasks assigned.

· Require to provide BOQ and high quality technical proposal.

· Require to be able to present technical solution professionally and have technical training for local channel partner and customer.

Requirements:

· Tertiary qualification or B. Science in computer science/engineering/telecommunication with distinction. CCIE and HCIE will be an added advantage.

· Minimum 3 years of working experience for networking designing and maintenance. (Proficient in STP,VRRP ,OSPF,BGP,MPLS,MPLS-TE, IPSEC VPN,L2VPN,L3VPN,Multicast, IPV6 , QOS,VXLAN )

· Preferable with after-sales experience in FSI or ISP industry.

· Skills required: networking such as switch, WIFI, router, firewall, SDN technology system integration.

· Knowledge of switch, router, WLAN, security or IT servers/storage would be an added advantage.

· Self-initiative to take the responsibility of task and learn new products/technologies

· The candidate shall be adaptable and flexible to tasks or job scope being assigned.

☑ Construction Industry

☑ Working days: 6 days

☑ Salary: up to $5000

Responsibilities:

• Oversee the compliance of work process to safety regulations and standard operating procedures
• Identify and maintain an optimum level of electrical spares for equipment and ancillaries
• Maintain and perform necessary preventive maintenance on the Distributed Control System
• Planning of budget requirement of the maintenance team
• Plan and oversee maintenance activities in E&I Section to ensure all works are completed efficiently and on timePrepare technical specifications for quotations to purchase spares and materials for maintenance works
• Ensure systematic documentation of work procedures and maintenance records for works carried out by the team
• Coordinate for prompt and safe handover of equipment machineries which may require repairs during plant shutdownTroubleshoot and resolve complex cross sections faults
• Any other duties as assigned by supervisor or Section Head

Requirement

• Graduate in Electrical/Mechanical Engineering.
• Knowing and applying current industry standards and information
• Having up-to-date knowledge and technical skills

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

• At least 5 years working experience

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

We are searching for a System Engineer to be part of our diverse team here in Glamco. Our System Engineers are key component of our operations by providing technical support, testing, installation, training, support and maintenance services for our programs in Singapore. In addition, the System Engineer shall support the Program / Project Manager on the project and system maintenance life cycle from pre-sales to maintenance.

Candidates must show initiative, highly independent, hands-on, aspiration for increase role and responsibilities, and a demonstrated willingness to work in a team.

Job Responsibilities:

Reporting to the Program / Project Manager, the System Engineer will be using their expertise and experience to support both internal Glamco and external Customer activities for our Singapore commercial program. Specific responsibilities but not limited to the following includes:

· Provide system engineering and networking support to our programs in Singapore including but not limited to hardware and software configuration and set up, troubleshooting networks and system defects, and fielding technical questions about hardware and software

· Manage and provide onsite and remote customer support including system and infrastructure installation, configuration, testing, training, maintenance, site-surveys etc

· Provide system engineering and networking expertise to our programs in Singapore during pre-sales and post-sales

· Develop, prepare and conduct test cases for customer’s program

· Develop and maintain technical and configuration documentation, training materials and user manuals

· Serve as a Technical Support expert and capable of handling escalations, incidents, outages and infrastructure challenges.

· Evaluate and upgrade system hardware and/or firmware with consultation with program partners. Perform system patching and deployment.

· Lead and manage a team of Technical Officers to provide technical and maintenance support to clients

· Support the Program / Project Manager to manage the project and system maintenance lifecycle from Proposal development to Project Kickoff to Initial Design to Development and Testing to Customer Acceptance Testing to System Maintenance Program

· Support the Business Development Team in determining project scope of work

· Ensure project and maintenance SLA (Service Level Agreement) and customer satisfaction levels are met

· Maintain standard operating procedures (SOP), processes and guidelines

· Maintain security, backup and redundancy strategies

· Research new technologies and solution in support of the programs

· Any other technical, operations or project related duties that may be required

Requirements

· Diploma or Degree in Information Technology or Computer Engineering or related field

· Minimum of 3 years working experience in IT Support, Network, Systems, Cyber Security type function

· Knowledge or experience with network and system administration including firewall and network infrastructure topology, networking protocols, routing and switching, and firewall configuration

· Knowledge or experience with server and workstation administration

· Checkpoint Firewalls, PaloAlto Firewalls, Fortinet Firewall, Cisco Switches, HP Aruba Switches, VPN Technologies, DNS, NTP, 2 Factor Authentication technologies

· Experience in running projects are plus points

· Strong interest and experience in the field of Radar and Radio Frequency (RF) technologies are plus points

· Good English and Mandarin interpersonal, oral and written communications skills are required

· Hardware, software and technical aptitude

· Strong analytical and critical thinking skills

· Show initiative, self-discipline, excellent judgment, career aspirations for increased role and responsibilities, a demonstrated willingness to work as a team with the ability to work independently

· Willing to perform potential shift duties, weekends and overtime

· Willing to travel overseas to support overseas requirements

· Willing to work in an SME environment

· Must possess Class 3 Manual driving license

- Ownership of a car is an advance

· Singaporean only

About Glamco:

GLAMCO Aviation Pte Ltd (GLAMCO) prides itself as a leading solutions provider for the Aerospace, Commercial, Air & Maritime Traffic Management and Defence & Security industries. Established in Singapore since 1985, GLAMCO provides component repair and overhaul, spares support, specialized products and other related consultancy services to Aircraft operators, Defence and Security agencies, Civil Airport and Seaport Operators.

Representing Aircraft Manufacturers, Systems OEMs, Stocking Distributors and OEMs worldwide, we are able to support Programme Management, quick response and delivery. GLAMCO has also expanded its activities to include the supply of specialized equipment for the Navy, Army, as well as Civil Airport and Seaport. Since 2020s,

GLAMCO has further expanded our services to provide logistics management (warehouse), system engineering and maintenance support to our customers.

To learn more about us and our products, please visit our website at www.glamco.com.sg.

If you are ready to make an impact, email your contact information and current resume to: [email protected]. Only shortlisted candidates will be notified.

Role:

• Experienced NAVCOM Engineer in maritime industry.
• Specialized in servicing and re-commissioning navigation systems.
• Proficient in installation, troubleshooting, and servicing of Marine Radar, Gyro compass, Magnetic compass, autopilot, echo sounder, speed log, steering FFU/NFU, weather fax, wind speed/direction, etc.
• Skilled in Marine Telecommunication Systems, including GMDSS, VHF/UHF, MF/HF SSB, NBDP, NDB, Navtex, Inmarsat.
• Ensure personal compliance with safety regulations of both company and customer.

Requirements:

• Strong background in Marine Electronics, Field Service Engineering, Commissioning, and Microsoft Office.
• Degree in Engineering or related field required.
• Training from OEM/manufacturers on Navigational equipment is advantageous.
• Knowledge of tools like CRM preferred.

Siemens Mobility is an outstanding place to have a career in an innovative environment. Siemens Mobility Rail Infrastructure business supplies the global markets of rail and road-bound transport with innovative products and solutions for Rail Automation, Rail Electrification and in the area of intermodal mobility, apps and backend systems.

What are my job responsibilities?

• Lead the team in Singapore to deliver the ATC design for Projects in Singapore meeting the keydates and the project requirements.
• Close coordination and follow up with the project Engineering Manager and the Project Manager of the project.
• Coordination with the team in Madrid for the deliveries required by the Project ensuring alignment of the customer requirements with the design.
• Holding design meetings with the customer and other SWC to ensure alignment of the design and requirements.
• Identify possible blocking points and provide the necessary actions to avoid impacting on the project deliverables.
• Follow up of the T&C activities progress providing the necessary support to close the issues which can be raised during this stage.
• Quality, completeness and consistency of the created outputs.
• Compliance with deadlines and costs with respect to the activities in the project.

What do I need to qualify for this role?

• Bachelor’s degree in engineering, preferably in electrical / electronics engineering / B. Tech, Diploma
• At least 5 years of relevant experience with minimum of 2 years in a similar position.
• Technical knowledge on main subsystems of a signalling railway project, especially ATC subsystem for both HW and Functional design.
• Experience in reading and understanding technical requirements to generate design documentation.
• Knowledge of engineering processes and communication skills to interface different departments will be important.
• Knowledge of Sirius CBTC solution is an added value.
• Strong leadership capability.

We support a diverse workforce.

Siemens is a proud equal opportunity employer, creating a work environment of diversity and inclusion. Our diverse workforce cultivates Innovation and Excellence and in turn creates a workplace where our employees belong and prosper. Diversity and inclusion help us fully realise the potential of our people. As part of Siemens Ownership culture, Siemens also genuinely supports reasonable flexible working practices that empower our employees to best meet work and personal commitments.

Job Description

• Designs, develops, documents, prototypes, and validates new automation products.
• Design for manufacturing (DFM), design for assembly (DFA), and Concurrent engineering.
• Detail fabrication drawings, assembly drawings, and layout drawings.
• Selection and sizing of standard components available off the shelf.
• Undertake new product development or be involved in sustaining engineering/CIPs.
• Research new automation technologies and continuous improvement for performance and system optimization.
• Develop a plan for equipment installation and validation at the customer or main business sites.
• Work with customers to gather requirements, review designs with customers, gather feedback, and create an execution plan.
• Work with customers and teams to solve problems during installation and volume manufacturing.
• Drive equipment optimization, quality assurance, cost reduction activities and improve user experience activities.
• Other duties/activities as assigned by management.

Job Specification

• Bachelor’s degree in mechanical engineering or relevant degree.
• Proficient in using 3D CAD modelling SW (Creo and SolidWorks will act as advantages) and associated Finite Element Analysis tools.
• Ability to read & interpret engineering data, scientific journals, technical procedures, international test standards & type-approval specifications.
• Great attitude and desire for self-improvement and independent problem-solving.
• Desire to learn and implement product testing, validation, and qualification methodologies.
• Willingness, ability, and desire to travel internationally to work with customers and team members.
• Good track record in:

1. Structural, kinematics, and dynamic analysis and FEA simulation
2. Strong in thermodynamic
3. Geometrical tolerance and dimensional analysis (e.g. stack-up error)
4. Engineering material selection
5. Design troubleshooting
6. Application of analysis tools like FMEA, DOE

• 3 years and above of experience is preferred, fresh grads are welcome to apply.

Job Responsibilities:

• Create, develop, and test industrial robotic machinery and create electrical drawings using E3 (ePLAN as 2nd option) with project requirements from clients
• Source and make budget for the control components
• Carry out axis tuning, servo & step drive setup, IO system setup and control system setup
• Perform on-site technical assistance along with good documentation in TCF

Job Requirements:

• Bachelors Degree in Electrical or electronics engineering
• At least three years of experience in the field
• Programming knowledge of motion controls, robotics, touch panels, and PLCs (Beckhoff preferred)
• Effective in spoken and written English for client liaision
• Working location: North

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only short-listed candidates will be notified.

EA License | 18C9251

Registration No | R22111484

☑ Construction Industry

☑ Working days: 6 days

☑ Salary: up to $5000

Responsibilities:

• Oversee the compliance of work process to safety regulations and standard operating procedures
• Identify and maintain an optimum level of electrical spares for equipment and ancillaries
• Maintain and perform necessary preventive maintenance on the Distributed Control System
• Planning of budget requirement of the maintenance team
• Plan and oversee maintenance activities in E&I Section to ensure all works are completed efficiently and on timePrepare technical specifications for quotations to purchase spares and materials for maintenance works
• Ensure systematic documentation of work procedures and maintenance records for works carried out by the team
• Coordinate for prompt and safe handover of equipment machineries which may require repairs during plant shutdownTroubleshoot and resolve complex cross sections faults
• Any other duties as assigned by supervisor or Section Head

Requirement

• Graduate in Electrical/Mechanical Engineering.
• Knowing and applying current industry standards and information
• Having up-to-date knowledge and technical skills

☑ Construction Industry

☑ Working days: 6 days

☑ Salary: up to $5000

Responsibilities:

• Oversee the compliance of work process to safety regulations and standard operating procedures
• Identify and maintain an optimum level of electrical spares for equipment and ancillaries
• Maintain and perform necessary preventive maintenance on the Distributed Control System
• Planning of budget requirement of the maintenance team
• Plan and oversee maintenance activities in E&I Section to ensure all works are completed efficiently and on timePrepare technical specifications for quotations to purchase spares and materials for maintenance works
• Ensure systematic documentation of work procedures and maintenance records for works carried out by the team
• Coordinate for prompt and safe handover of equipment machineries which may require repairs during plant shutdownTroubleshoot and resolve complex cross sections faults
• Any other duties as assigned by supervisor or Section Head

Requirement

• Graduate in Electrical/Mechanical Engineering.
• Knowing and applying current industry standards and information
• Having up-to-date knowledge and technical skills

Essential Functions (Responsibilities):

- Develop and grow key accounts in the Oil & Gas sector, Pharmaceutical and other industrial sectors contribute company growth objectives in Singapore.

- Provide technical sales support and consultation to clients for the sale of electrical products in order to develop business opportunities and penetrate clients.

- Perform all aspects of selling to maintain and develop new or existing customers including: take-offs, project quotations, closing orders, preparation of submittals and resolving customer problems.

- Meet or exceed budgeted sales and gross margin targets with assigned accounts.

- Focus on identifying specific technical requirements of customers while simultaneously collecting commercial and competitive information associated with each account

- Cultivate effective long-term relationships at all levels of the customer organization.

- Attain expert knowledge of products, electrical goods market and competition.

Qualifications/Requirements:

- Formal Electrical Engineering qualification (Diploma/Certification)

- Strong technical and commercial background.

- Minimum 1 to 2 years of proven sales experience to industrial customers

- Electrical product knowledge

- Very strong consultative selling, interpersonal, and negotiation skills

- Resourceful and results-oriented.

-Highly motivated, self-confident, self-starting work ethic with good networking abilities

- Team player who works well in global teams

- Good command of spoken/written English

- Have own car

** Package up to 55K a year **

Brief Summary

• Basic $5000 with Full benefits
• 5 Days | Mon-Fri 8.30am-5.30pm
• Working Location @ East

Job Responsibilities

• Maintain IT environment (network, servers, PCs, etc ) to ensure continuity, secure and stable operation.
• Setup, configure and troubleshoot server, network infrastructure and security for the organization.
• Validate, implement and document end-to-end process for office network structure, physical and virtual security, server, backup, IT inventories, etc.
• Hands-on knowledge on IT equipment setup, WAN, LAN, DMZ design, Cybersecurity, Server installation, OS hardening, Virtualization, Computer troubleshooting, etc.
• Proactively monitor and report IT operation, deliverables, risks and issues, incident reports, etc. ensure IT service is within good standard and meets SLA.
• Work with Corp It and external vendors to optimize networking setups and provide reporting of network status.
• Design and implement new system and network solutions and/or improving the efficiency of current networks.
• Hands-on operate for AD, DNS, File server, printer, email, Antivirus services.
• Provide L1/L2 IT supports to end user onsite or remotely.
• Perform regular internal auditing and review IT compliances and policies.

Requirements:-

• Min. 3 Years' experience in server administration and network security environment.
• Good fundamental knowledge of Networking protocols, DNS, VLAN, VPN, switching, routing, QoS, etc., and familiar with network monitoring tools
• CCNA / CCNP, Security Certification and/or MSCE preferred
• Familiar with IT infra, security principles and OA system administration

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**

EA Reg. No: R1988238

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter
• Any other duties assigned

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines