We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

• Minimum Degree or Diploma in Electronics / Mechanical / Manufacturing Engineering or equivalent.
• Maintain quality procedures, policies, and documentation in accordance with applicable standards and regulations (eg. ISO9001 etc.)
• Coordinate external audits to evaluate the quality and compliance of external partners and suppliers
• Maintain accurate and up-to-date documentation of quality procedures, records, and reports.
• Ensure proper record keeping of audits, corrective actions, and other quality-related activities.
• Follow up on quality issues with suppliers and customers, 8D CAR report. Maintain NCMR.
• Perform incoming and outing product inspection
• Support all operational quality-related activities, including problem solving and implementation of improvement plans
• Responsible for the investigation and analysis of customer complaints. Follow-up with the relevant departments to review the risk impact and improvement actions to ensure that these are addressed and closed in a timely manner.
• Ability to communicate with all levels of staffs and overseas counterpart, customers, suppliers and representatives from regulatory bodies.
• Willing to travel overseas for work as and when required

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

About Us

Dyson is passionate about design and our spaces are no exception. The Global Estates team is here to ensure that our spaces nurture, facilitate and inspire the talents that propel the business forward. This role will work closely with corporate real estate professionals – planners, strategists, designers, engineers, project managers and key stakeholders to help deliver solutions that work exceptionally.

About The Role

• Represent the Estates Engineering team in capital projects.
• Provide engineering guidance and support for all building services and capital projects.
• Review designs and submittals from consultants and contractors e.g. Material and equipment submissions, design calculations for system capacity sizing, construction layout drawings, testing & commissioning method of statements etc.
• Ensure all projects meet Dyson building services minimum standards specification (MSS); established international and country specific codes, standards and regulatory requirements; best-known methods; and conform to approved construction drawings
• Ensure that projects are delivered in time and on budget.
• Work closely with Dyson key stakeholders to ensure projects are delivered according to their specifications and requirements. Interrogate feasibility and value of project requests.
• Participate and contribute in continuous improvement programs and update established MSS documentation as needed.
• Be the subject matter expert for infrastructure improvements and refurbishments in line with business commitments and sustainability targets.

About You (Essential)

• Facilities/Real estate experience in Building Services/M&E Engineering is a must.
• Electrical Engineering or related Building Services Engineering Degree from a recognized institution.
• Minimum 7 years’ experience with strong Electrical Engineering background in Building M&E systems.
• Must have working experience and good knowledge of Electrical HV/LV systems e.g. Gensets, Transformers, Switchgears, UPS, Lighting etc. Must be conversant with regulatory codes and standards.
• Experience with other engineering disciplines such as ACMV, Hydraulics, CDA, BMS, Fire Protection, Sustainability, Acoustics & Process Utilities systems.
• Experience with Office, Labs and Manufacturing facilities.
• Proficient working in Microsoft Excel, Word, Powerpoint and internet platforms.
• Highly organised and efficient.
• Ability to work with people at different levels. High EQ and interest in meeting people of different levels.
• Strong team player and able to work independently.
• Proactive, diligent, committed and resourceful.
• Strong and Good in both oral and written communication skills.

• Marine Electronics & Telecommunication
• Basic $3000 - $3500
• 5 days (8.30am – 5.30pm)
• Location: Pandan Loop

Responsibilities

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements

• Min Diploma/ Degree in Engineering or other relevant
• No experience are also welcome

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP
  Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

Requirement

• Bachelor/Masters Degree in Electrical/Computer Engineering
• Min 2 years of high-speed CPU/GPU/DSP Subsystem RTL Integration experience or IP/Block/SoC Design experience (Candidate with less than 5 years of relevant experience will be considered for junior position)
• Experience with Synopsys ICC (preferred) or Cadence tools from netlists to GDS
• Experience in graphics processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Knowledge of high-speed/low power IP and custom circuit design
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Good communication and scripting skills

We are looking for a candidate for high-speed analog integrated circuit design. This candidate will contribute to the development of high linearity silicon photonics modulators for 6G and beyond communication systems. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications
• Design and tapeout ICs which include state-of-the-art circuit blocks, e.g. wideband linear low-noise amplifier and transimpedance amplifier with a focus on circuits interfacing with silicon photonics elements
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electronic Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job responsibilities:

• Report to the Head of System Engineering at basis level and to the Lead/Senior Technical Safety Engineer at project level.
• Implement Company work processes, procedures and quality policies as required by project.
• Adhere to Company contractual requirements, Scope Boundaries and support the Lead Engineer with the Management of change on assigned areas.
• Be responsible for the management of resources and progress of the Safety Engineering scopes and for internal and external deliverables in line with the project budget and schedule.
• Be responsible for the technical integrity of all Safety Engineering design activities and deliverables under his/ her supervision through the project lifecycle and for the compliance with relevant project performance, integrity, quality and HSE requirements.
• Review and provide technical inputs on Technical Safety related technical matters to interfacing disciplines, in coordination with the Lead Technical Safety Engineer, during the development of design on projects.
• Manage Technical Safety interfaces with equipment and package suppliers to comply with technical requirements, specifications and Client’s Basis of Design, Standards & Project Specifications.
• Act as the package responsible engineer for safety, life-saving and firefighting equipment.
• Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
• Be responsible for the progress of assigned Technical Safety scopes, the internal and external deliverables in line with project budget and schedule.
• Support the Lead Engineer on verification activities as required by the verification body / classification society or other applicable approving authorities.
• Represent the Technical Safety discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
• Provide technical support related to Technical Safety at the fabrication site, whenever required.
• Continuously seek to improve working methods, tools and procedures and contribute actively to the Technical Safety Discipline development and experience transfer.
• Perform any other duties as assigned by his/ her supervisor.

Work experience requirements:

• Must have a minimum of 10 years of experience having worked in an engineering setup for upstream oil & gas projects (Fixed and Floating installations) having served in the capacity of a Safety Engineer, having accrued thereof a minimum experience of 5 years in the capacity of a Senior Safety Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Must have significant experience with implementing Safety Design Philosophies and Specifications related to Escape and Emergency Response, Active and Passive Fire Protection, Fire and Gas detection, Design Accidental Loads, Emergency Shutdown and Human Factor Engineering.
• Must have had significant experience with developing Safety Engineering Deliverables related to Escape Route Layouts, Firewater Calculations and P & IDs, Fire and Gas Drawings, Hazardous Area, Noise Specification and Flare Radiation.
• Must have had significant exposure to supporting the development and implementation of recommendations from third party safety studies and workshops, including HAZID/ENVID, SIL Classifications, Smoke, Gas, Fire and Explosion Risk Analyses, Evacuation Analyses, QRA, ALARP assessments, Fire and Gas Mappings and Noise Studies.
• Must have a good understanding and knowledge of oil and natural gas industry standards such as, but not limited to, API (American Petroleum Institute), ISO (International Organisation for Standardisation), NORSOK, EU Directives and other relevant standards related to Technical Safety.
• Must have strong computer literacy in commonly used business software applications such MS Office and shall be familiar in the use of the latest versions of Technical Safety related software such as Pipenet, DNV PHAST, Flaresim etc.

Qualifications:

• Bachelor’s degree in Mechanical/ Chemical/ Safety Engineering or other equivalent engineering specialisation.

Other skills:

• Excellent technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
• Strong interpersonal skills and ability to work well with people at all levels.
• A self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.

​​​​​​​We regret that only shortlisted candidates will be notified.

Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities :

• Responsible for the design and development of analog building blocks, including amplifiers, integrators, switched capacitor circuits, regulators, bandgap circuits, Delta-Sigma ADCs, SAR ADCs, filters and control logics etc.
• Responsible for top-level integration of high performance mixed signal chips including analog front end signal acquisition and conditioning chips and analog front end battery monitor chips etc.
• Work with digital team to define register maps, control logics, digital filters for analog front end chips or mixed signal SOCs etc.
• Conduct periodic design reviews.
• Support test development and product development teams in bringing projects to production.

Requirements:

• Degree/Master/PHD in Electrical Engineering or Microelectronics with excellent technical background in analog /Mixed-Signal design.
• With interest in IC design welcomed.
• With experience in analog IC design preferred.
• Salary will be offered base on working experience

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing technical support to the plating department laboratory and engineering and manufacturing activities
• Responsible in resolving all chemical related issues.

Requirements

• Min Diploma in Chemistry or Chemical Engineering
• Min 3 years of working experience in laboratory in chemical industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for reading, interpreting and drawing up technical drawing specifications
• Responsible in developing, coordinating, monitoring all aspects of the operational set up for projects assigned
• Responsible for working cross-functionally with different teams and organizations
• Responsible for applying Six Sigma/Lean Manufacturing methodologies for continuous process improvements and to improve operational efficiency

Requirements

• Min Nitec in Mechanical Engineering or relevant discipline
• Min 1 years of working experience in manufacturing industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026