• Attend Mechanical meeting to report day to day activities, scheduled maintenance work,
• Conduct daily and weekly safety and progress meetings.
• Maintain Plant wide equipment track records (pumps, motors, gear box, shafts, valves).
• Beware of call up for break down job, contingency meeting with maintenance engineer.
• Compliance to the in-house HSSE standards and requirements to ensure a safe place to work, and accountable for all assigned Critical activities.
• Work in confined space (Tanks, reactors, Drums) shaft, propeller, Mixtures alignment)
• Provides day-to-day hands-on repair of rotating equipment and drive high standard performance and accountability to deliver the site and department’s goals and target within the deadline.
• Good documentation of all equipment technical records and update SAP to reflect the latest changes.
• Execute improvements plans to minimise or eliminate inefficiency and ineffectiveness in workshop execution and implement technical solutions, including troubleshooting to resolve these problems.
• Prepare job specifications and costing for works involved and apply work permit for work execution.
• Support engineers to resolve equipment issues and update maintenance information, records and drawings are entering in the in-house system.
• Attend standby callout to the Emergency work upon request.
• Support operation for smooth production, trouble shoot and maintaining of high priority equipment’s like Centrifuge, decanter, chiller and shredder.
• Coordinate and supervise scheduled, breakdown and TA work executions by contractors including maintenance executed projects and modifications.
• Compliance with all safety measures, quality and maintenance procedures, including related technical specifications.
• Timely reporting of maintenance activities updates, and manage work order in SAP (PM closing, PR rise, SES, manpower hours and purchasing etc)

Project Planning

• Preparation of the Company's Quality Assurance Manual and the ongoing control and supervision of all amendments and revisions.
• Preparation and control of project system management documentation prior to the project commencement.
• Preparation of method statements for tenders and projects.

Project Execution

• Monitor all quality-related activities for ongoing projects
• Ensure non-conformance reports are rectified
• Monitor the progress and effectiveness of the project quality management system. Recommend and implement improvements when required.
• Perform inspection on all procedures and prepare inspection checklists
• Coordinate with the site team regarding any ongoing site issues.
• Prepare weekly progress report and address all QA / QC concerns.

Subcontractor and Supplier Management

• Verify Main Contractor quality requirements to vendors and contractor documentation submittals.
• Perform and maintain all internal and external factory audits
• Inspect production and delivery to ensure adherance to specifications.
• Ensure adherence to health and safety guidelines as well as contractual obligations (e.g. specifications and schedule)•Monitor all operations that affect quality

IT

• Installing and configuring computer hardware, software, systems, networks, printers and scanners
• Monitoring and maintaining computer systems and networks
• Responding in a timely manner to service issues and requests
• Providing technical support across the company (this may be in person or over the phone)
• Setting up accounts for new users
• Repairing and replacing equipment as necessary

Shipping

• Coordination of shipment information and documentation between stakeholders (suppliers, subcontractors, banks, shippers)
• Work closely with the Project Department and Commercial & Procurement Department regarding shipments
• Contact supplier or shipper if a mistake is identified
• Prepare shipping documents - invoice, packing list, LC, shipping guarantee, letter of indemnity
• Check & follow up on documents - invoice, DO, PO
• Verify documents according to order and invoices (quantity, description, price etc.)
• Ensure completeness of shipment
• Update shipping register & master Trade Receivables (TR) list
• Maintain all physical files related to stated duties

All other duties as assigned by Management.

Job Description:

We are seeking energetic and driven candidates to fill our openings for Sales Engineer, based in Singapore. You will be responsible for the sales and marketing of our wide array of process and environmental products.

Responsibilities:

- Research new market opportunities and responsible for driving business growth within a company.

- Develop new sales strategies and action plans to expand overall business growth

- Oversee existing customers and develop new customers within assigned industrial market sector

- Daily tasks include handling of sales enquiries, preparation of sales quotation and costing sheet, conducting customer visits if necessary

- Perform product sales introduction and technical presentations to customers

- Assist to manage existing network of distributors within South East Asia and give directions in line with markets trends

- Opportunity to expand and appoint/develop new distributors in new territories

- Support distributors to achieve their respective Sales targets, and hence achieve the overall target for the region

- Work together with the respective distributors to create appropriate strategies for each market and/or market segments

- Closely monitor distributor sales performance on a quarterly basis and feedback to respective distributors as well

- Represent the Company in a professional manner and establishing good rapport and business relationship with our customers, suppliers and principals

Requirements:

- Degree in Engineering or Science (some basic background in Environmental & Chemistry is important)

- Technical competence in air/gas & water quality analytical instruments, experience/exposure to process & environmental monitoring equipment.

- Willing to travel up to 20% in a year

- Must have strong interpersonal and communication skills

- 3 to 5 years’ experience in managing distributor is a major advantage

Cooperate and communicate effectively with project manager and other project personnel to provide assistance and technical support

Planning, Execution and Monitoring

• Assist in the overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status
• Monitor the work progress on daily basis
• Assist to prepare internal and external reports pertaining to project status
• Evaluate project progress and prepare detailed reports
• Collaborate with design team and engineers regarding the design and cutting lists and shop drawings
• Ensure quality construction standards and the use of proper construction techniques
• Assist to obtain required permits and licences
• Ensure compliance to applicable codes, practices, QA/QC policies, performance standards and specifications

Contract Management

• Evaluate progress and prepare detailed reports
• Timely submission of progress claims to the client/main-contractor

Supplier and Sub-Contractor Management

• Coordinate and direct construction workers and subcontractors
• Hire contractors and other staff and allocate responsibilities
• Supervise the work of laborers, mechanics etc. and give them guidance when needed
• Evaluate sub-con progress and certify claims accordingly
• Assist procurement team with negotiation of contracts with external vendors to reach profitable agreements

Safety

• Ensure adherence to all health and safety standards and report issues
• Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations

Responsibilities

• Bachelor’s degree in computer science, Information Security, or related field.
• Relevant certifications such as AWS Certified Security - Specialty or Certified Cloud Security Professional (CCSP) are a plus.
• Excellent communication skills and the ability to collaborate with diverse teams.
• Organised, independent and able to work with minimal supervision in a fast-paced working environment and adhere to organisational process and governance.
• Minimum five (5) years of relevant IT experience in deploying and managing application and services on cloud, including the design, development, implementation and/or management of the solution.
• Proven experience as a Cloud Security Engineer or similar role, with a focus on AWS cloud services
• Good knowledge in security
• Strong understanding of cloud platforms such as AWS, Azure, or Google Cloud.
• Proficient in security concepts related to infrastructure as code (IaC) and containerisation.
• Experience with security tools and technologies, such as Security Information and Events Management, Data Loss Prevention, Database Activity Monitoring, Data Security and Protection, Privileged Access Management, File Integrity Monitoring, Web Application Firewall, Intrusion Prevent etc

Responsibilities:

• Experience managing data engineering jobs in big data environment e.g., Cloudera Data Platform
• Good understanding and completion of projects using waterfall/Agile methodology.
• Good understanding of analytics and data warehouse implementations.
• Ability to troubleshoot complex issues ranging from system resource to application stack traces.
• Strong SQL, data modelling and data analysis skills are a must.
• Hands-on experience in big data engineering jobs using Python, PySpark, Linux, and ETL tools like Informatica.
• Track record in implementing systems using Hive, Impala and Cloudera Data Platform will be preferred.
• Hands-on experience in DevOps deployment and data virtualization tools like Denodo will be preferred.
• Understanding/Hands on experience of reporting or visualization tool like SAP BO and Tableau will be beneficial but not required.
• Passion for automation, standardization, and best practices
• Good written and verbal communication and interpersonal skills, ability to understand the business requirement, communicate confidently with stakeholders

JOB PURPOSE:

The Design Engineer will be responsible for designing solutions encompassing both hardware and firmware for target applications identified by the Design Center.

PRINCIPAL ACCOUNTABILITIES:

The main design direction of the Design team is focused on machine learning and communications, with the goal of creating reference designs that allow Futures’ customers to implement their own systems at a second level.

By specializing in these areas, the Design Engineers can leverage their design experience and training to provide valuable support and add value to the customer's design process.

While the Design Engineers will not directly interface with all of Future's customers, the Technical Sales Manager (TSM) will take the lead in engaging with customers, while the Design Engineers will provide backend support.

JOB CONTENT (PRIMARY & SECONDARY FUNCTIONS):

It is the responsibility of the Design Engineer to carry out the following:

Primary Functions

· Design, development, testing and support of firmware/embedded software applications for microcontroller.

· Drive technology/development projects in all phrases from specification to release.

· Read or understand electronics schematic and system design.

· Work closely with cross functional teams to ensure project delivery on time.

· Define and create product software specification including software architecture, feature descriptions and applications notes of the system.

· Research technical issues and/or opportunities and provide recommendations.

· Participate in ad hoc software projects and assignments as required.

· Ability to perform schematic capture and PCB design is a plus.

Secondary Functions

· Support Center Director to generated training materials and solution specification.

CREDENTIALS:

QUALIFICATIONS

· Diploma/Degree in Computer or Electrical or Electronic Engineering or equivalent.

EXPERIENCES

· Proficient in C, C++ programming, Python, TensorFlow

· Knowledge of embedded electronics fundamentals

· Experience in real-time operating system

· Experience on developing Industrial controllers' products with machine learning is added advantages.

· Able to read schematics and utilize Oscilloscopes and other test equipment to debug Firmware issues.

· Strong analytical skills with ability to learn and apply research theories into developing algorithms to solve real world problems.

· Good leadership qualities (take initiative and have ownership)

· Able to work independently within tight schedule with positive disposition.

Competencies (Knowledge, Skills & Attitudes)

· Possesses strong Communication and Presentation Skills, including the ability to present information and ideas in a confident fashion to the customer’s engineers and technical managers.

· Displays good Commercial Awareness and Understanding of the business impact on how designs affect customers' profitability.

· Able to commit to response times and have sense of urgency.

· Proficient in allocating own resources.

· Able to select and specify devices for designs.

· Able to make decisions on how to optimize limited company resources.

• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

Stand in rate to be discussed during interview.

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

Duties & Responsibilities:

• Visit the precast fabrication yard min. twice a week during the duration of casting
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering degree recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Minimum 4 years of experience in concrete technology, inspection, quality control and quality assurance procedures related to production of high quality precast concrete products
• Accredited by JAC of IES/ACES as QSS

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Together with the QP(S), provide overall team direction and management to realise the project objectives and activities as required by the Superintending Officer and consultants, ensuring that the project is delivered to the highest technical and safety standards
• Review Contractors’ proposal, method statements and designs
• To assist QP(S) and QP(Geo) in reviewing the construction proposals and implement supervision oversight of these construction works carried out by the Contractors
• Lead the RTOs to check all drawings (including shopdrawings, construction drawings) and specifications for discrepancies
• Overview of the quality system implementation, materials approval and compliance testing procedures
• To provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site
• Carry out any other duties related to the Project, including administrative tasks as directed by the CAG

Requirements

• The RE-Geotechnical shall have minimum five (5) years of relevant experience as a geotechnical engineer, of which at least three (3) years shall be in supervision of works in bored piling and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation
• The RE- Geotechnical shall possess a Geotechnical engineering degree recognised by the Professional Engineers Board of Singapore
• The RE- Geotechnical shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical, D-wall and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

The candidate must be civil engineering graduate and have knowledge in soil improvement works. Such as DSM, JGP and ground anchor scope. Must be able to work long hours and able to communicate and work closely with different type of foreign nationality. The candidate should have experience and knowledge related to soil information and grouting materials.

Job Responsibilities :

• Sourcing of material or components
• Preparation of material data sheet for submission
• New product development, finding the source and request quotation; prepare the costing sheet.
• Create BOM for in house products.
• Convert, Modify & Create drawings for in house products, exp : PDF, 2D & 3D
• Involve engineering evaluation and study for related products.
• Leading engineering changes and the product continuous improvement for in house products.
• Prepare, review & create DFM for in house products.
• Arrange, plan, prepare coordinate Sample build activities for in house products.
• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• To work with factory to perform qualitative and quantitative analyses according to customer requirements.
• Coordinate, arrange and inspect for all required sample submission.
• Review, distribute, coordinate & control project related documents, exp: Drawing, DFM & Work instruction etc.
• Document all necessary data, acceptance and implementation procedures.
• Ensures proper records and documented for all activities required for the project.
• Control & monitor any product ECN, running change & improvement implementation.
• Oversees any trials and/or validations that pertain to the specific project.
• Provides technical support in solving product quality problems.
• Provide ongoing reports to department manager regarding project progress and project status.
• Coordinate with all internal department for all project requirements before start of production.
• Ensure product quality & capacity achieve according to requirements & plan.
• Other ad-hoc duties assigned by superior; management.

Job Requirements:

• Minimum qualification - mechanical related diploma graduated
• Minimum 1-year experience in project engineering management.
• Mechanical product or Molding related process experience is an added advantage
• Taking initiative and/or leadership on projects and good project management skills.

As a Gas Chromatography lab application engineer, you would be responsible for designing, developing, and optimizing gas chromatography systems. Your work would involve ensuring the proper functioning of gas chromatography instruments, troubleshooting issues, and providing technical support.

Responsibilities:

• To provide active support to gas chromatography tuning, preparation of GC operation data and report.
• Gas chromatography tuning involves columns installation, operation data collection, and handling of gas and liquid cylinders.
• Ability to troubleshoot gas chromatography issues.
• Support the manager to ensure the quality of the GC produced and to ensure the cleanliness and safety of the lab.
• Support the department on the daily operation activities.

Requirements:

• Minimum Diploma and above in Chemical engineering/Chemistry/ Chemical Process, or any related module is preferred.
• Minimum 2 years of working experience as a Gas Chromatography Lab Application Engineer, who is familiar with gas chromatography principles, operation, calibration, and data analysis is essential
• Proficiency in Microsoft excel and word.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.