n The Contractor shall provide integrated managed network services that encompass Network Administration and Management Services.

n Network equipment shall consist of, but shall not be limited to, hardware, software and firmware of network switches, routers, firewalls, intrusion detection systems (IDS), intrusion prevention systems (IPS), virtual private network (VPN) gateway, content engines, proxy, wireless access points, wireless controllers, hardware load balancer, modems, IP PABX, Uninterruptible Power Supplies (UPS), and server hardware. The phase “network devices” shall be used interchangeably with “network equipment”

n Network infrastructure shall consist of, but shall not be limited to, client and the In-Scope Institutions’ LAN and WAN, wireless network (WLAN), extranet connections, peer-to-peer connections to external agencies, Internet connections and the Demilitarized Zone (DMZ). The network infrastructure shall encompass the network services components including but not limited to, Network Time Protocol (NTP), Domain Name Services (DNS), Active Directory, Dynamic Host Configuration Protocol (DHCP), remote access, VPN and Cisco Secure Access Control Server (ACS). The phase “data network” shall be used interchangeably with “network infrastructure”.

n The Contractor shall perform day-to-day network operation for the network infrastructure and network equipment and the In-Scope Institutions’ premises.

o The Contractor shall setup and operate an online network operation management portal as part of the Network Administration and Management Services for general access and the In-Scope Institutions’ end users at no additional cost to the client and/or the In-Scope Institutions. The information presented in the portal shall be up-to-date and shall include, but shall not be limited to, the following:

• (i) Network diagrams and equipment configuration such as IP addresses, firmware and software version for the network equipment in multiple levels, hierarchical details and categorized by respective In-Scope Institutions.
• (ii) Physical layout and location of the network equipment per each Site.
• (iii) Configuration change history of the network equipment.
• (iv) Cable plant inventory inclusive of labels and tags information.
• (v) UPS inventory inclusive of capacity, usage, support and maintenance details.
• (vi) Online job requests submission and job requests status.

(vii) Incident reports status and workflow for tracking of escalation and resolution

1. Design and Drafting:

- Use computer-aided design (CAD) software to create detailed engineering drawings and plans.

- Assist in the design process for various projects, such as buildings, machinery, or electronic systems.

2. Testing and Quality Control:

- Conduct experiments and tests to evaluate the performance and reliability of products or systems.

- Implement quality control procedures to ensure that products meet industry standards and specifications.

3. Technical Support:

- Provide technical support to engineers or other team members in the development and implementation of projects.

- Troubleshoot and solve technical problems that may arise during the design or manufacturing process.

4. Maintenance and Repair:

- Perform routine maintenance and repair of equipment or systems to ensure proper functionality.

- Diagnose and address issues with machinery or electronic systems.

5. Project Management:

- Assist in project management tasks, such as budgeting, scheduling, and coordinating activities to ensure project goals are met.

- Collaborate with cross-functional teams to achieve project objectives.

6. Installation and Commissioning:

- Participate in the installation and commissioning of new equipment or systems.

- Ensure that installations meet safety and performance standards.

7. Documentation:

- Prepare technical documentation, including manuals, reports, and specifications.

- Maintain accurate records of engineering activities and project progress.

8. Research and Development:

- Contribute to research and development efforts by staying updated on industry trends and incorporating new technologies into

Key accountability (Main purpose of this job):

Reporting to the Head of Technology, this role requires a good mix of technical and business-interfacing skills to scope, implement and manage a range of applications for internal and external customers. The key focus areas of this role will be platform governance, process automation and optimization, integration architecture and database administration.

Responsibilities (Key areas of Responsibilities):

● Oversee the technical evolution of our current IT infrastructure, which includes learning management system, student management system, customer-relationship management system and administrative systems.

● Interface with end-users to understand short and medium term needs.

● Develop software solutions by studying information needs; conferring with users; studying systems flow, data usage and work processes; investigating problem areas; and following the software development lifecycle.

● Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and proposed solutions.

● Develop optimal solution architectures to ensure technical compatibility and user satisfaction.

● Implement, configure and test feasible solutions.

● Support users on change control and system updates.

● Stay up-to-date with technical and industry developments and standards.

Requirements:

● Bachelor’s Degree in Information Systems, Computer Science, Computer Engineering or IT-related equivalent

● 5-8 years of software development or full-stack web development experience on integrating various SaSS or custom platforms (CRM, LMS, ERP etc) using API or web services

● Strong Hands-on experience with cloud integration platform (Workato, MuleSoft etc) and relational database (MS SQL, MySQL, Oracle, Mongodb, BigQuery etc)

● Hands-on with Programming Languages: HTML5, CSS, Java, PHP, Web Services, JavaScript/JQuery, Bootstrap, Python, typescript, Nodejs

● Strong analytical mindset and solution focused

● Demonstrated experience in effectively managing end-users

● Experience with Google Cloud, Ubuntu, especially Kubernetes, BigQuery, Looker and other data analytics services is a huge plus

● Prior experience working in the education sector and student information systems and LMS will be advantageous

We are seeking a talented and experienced Data Engineer cum SAS Consultant to join our team. The ideal candidate will possess a strong background in data engineering, SAS programming, and proficiency in Python and Spark or PySpark. The role involves designing, developing, and implementing data solutions while leveraging SAS tools to provide insightful analytics. The candidate should have a passion for data, strong problem-solving skills, and the ability to work collaboratively in a dynamic environment.

Key Responsibilities:

1. Data Engineering:

• Design, develop, and maintain scalable and efficient data pipelines for large volumes of structured and unstructured data.
• Collaborate with cross-functional teams to understand data requirements and implement solutions that meet business needs.

• Utilize SAS programming skills to extract, transform, and load (ETL) data for analytical purposes.
• Develop and implement SAS solutions for data manipulation, statistical analysis, and reporting.
• Provide expertise in SAS programming to support analytics and business intelligence initiatives.

• Proficient in Python for data manipulation, analysis, and automation.
• Experience with Spark or PySpark for distributed data processing and analytics.

• Perform exploratory data analysis to identify trends, patterns, and anomalies in the data.
• Collaborate with data scientists and analysts to deliver actionable insights from complex datasets.

• Implement data quality checks and ensure the accuracy and reliability of data used in analytical processes.
• Troubleshoot and resolve data-related issues in a timely manner.

• Create and maintain comprehensive documentation for data pipelines, SAS programs, and analytical processes.

• Work closely with business stakeholders, data scientists, and other team members to understand requirements and deliver effective data solutions.

• Bachelor's or Master’s degree in Computer Science, Data Science, or a related field.
• Proven experience as a Data Engineer with a focus on SAS programming.
• Strong proficiency in Python and experience with Spark or PySpark.
• Solid understanding of data modeling, ETL processes, and data warehousing concepts.
• Excellent problem-solving and analytical skills.
• Effective communication and collaboration skills.
• SAS certification is a plus.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments.

Join our Cybersecurity team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Collaboration is key to our success. We prioritize open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Job Description

• We are looking for a hands-on and meticulous individual who possess knowledge on programming skills and algorithm development.
• Work closely with all the relevant stakeholders to translate the operational requirements into effective and efficient solutions.
• Work as a product development team to collectively manage the product development lifecycle from system design, development testing, and production.

Requirements

• Familiar to at least one of the programming language: .Net, Java, C or C++, C#
• Soft skills – Problem Solving, Communication and Teamwork Skills
• We welcome candidates with no experience but possess strong logical thinking to apply - product-specific and on-job trainings will be provided.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Responsibilities:

• Provide excellent customer service.
• Provide IT technical onsite support for end user services problem which includes identification, diagnosis, rectification and escalation.
• Support on desktops, notebooks, printers, scanners hardware components.
• Installation, re-installation, troubleshooting and reconfiguration of Microsoft Windows and Microsoft applications that are found in the Desktop PCs and Notebook PCs. Examples of such software are Windows 10 OS or any standard desktop OS, MS Office, Internet Explorer, MS Outlook, MS Outlook Express, etc.
• Installation of Apple IPad software’s.
• Provide support for queries, escalation, problem determination, resolution and MAC – move, add and change.
• Printer Maintenance.
• Take on and resolve complex calls or tasks the other engineers could not resolve.
• Responsible for learning and working independently.
• Responsible for providing excellent support and timely service.

 Requirements:

• At least a Professional Certificate, Diploma or advanced /Higher /Graduate Diploma.
• Prefer minimum 3 years healthcare environment experience.

 Skill Sets:

• Hardware Skill – Desktop, Laptop, Printer and Scanner, Windows OS (Must know Windows 10)

Requirements:

We are looking for a Project Engineer to oversee the day-to-day tasks associated with project management, engineering, cost management, quality control, documentation and reporting, and site coordination. The Project Engineer will be part of a team that designs and builds large-scale commercial and residential swimming pools, spas, and water features from the ground up. The role oversees all aspects of the construction projects, ensuring their timely completion within budget and in compliance with regulations. The role will also involve collaboration with architects, contractors, and other stakeholders to ensure efficient project execution.

Responsibilities

• Project Planning and Coordination - manage project plans, schedules, and budgets; coordinate project deliverables according to timelines and specifications; collaborate with architects, engineers, and contractors to clarify project parameters and resolve issues.
• Site Management and Quality Control - monitor construction progress according to quality standards and building regulations; conduct regular inspections to ensure quality workmanship.
• Cost Management - assist in cost estimation, budget preparation, and cost control throughout the project lifecycle; identify cost-saving opportunities without compromising quality or safety.
• Documentation and Reporting - maintain accurate project documentation, including reports, drawings, and contracts; prepare progress reports and communicate project status to stakeholders regularly.
• Risk Management - identify potential risks and develop corrective action; ensure compliance with safety standards and regulations to minimize risks on-site.

• Minimum 5 years experience in building and construction, or related field.
• Bachelor's or Master's degree in Mechanical, Electrical, Civil Engineering or related field.
• Strong project management skills to manage resources, track project status and mitigate risks.
• Excellent communication skills to effectively manage project timelines and budgets, as well as coordinate with stakeholders, contractors, and suppliers.
• Expertise in project engineering to ensure that designs comply with engineering standards and applicable regulations.
• Experience in project planning to develop project scopes, objectives, and schedules that align with business goals.
• Mechanical and electrical engineering skills to design and develop electrical systems for swimming pool facilities.
• Experience in swimming pool construction or related field is a bonus.
• Experience in Autocad, Microsoft Office, Microsoft Project.

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational down-time.

As a IT Support Engineer, you will be responsible for the following :-

• Assist the project teams with setting up, installing, and configuring operating systems, applications, and peripheral devices for PCs/Workstations.
• Provide first level on-site IT support to end-users on a 24x7 rotational shift, including weekends and holidays.
• The successful applicants should be prepared to be deployed primarily at Tuas Checkpoint. The successful applicant could be deployed to Tuas checkpoint in future on a rotational basis.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• Experience in installing, configuring, and troubleshooting PC/peripheral devices and providing application maintenance support is necessary.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), KPIs (key-performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

We are a Singaporean SME located in Jurong area, manufacturer and agent for Weighing and Weighing Related Equipment, Electronic Measurement & Control Devices, Powder Processing Equipment and Systems, and Packaging Equipment. The foundation of our continued success over the past 69 years is a dedicated and professional team that strives relentlessly to overcome all challenges.

You will be part of the Engineering team to perform machinery design, supervising and handling of fabrication with sub-fabricators and suppliers, machinery installation, test and commissioning.

THE ROLE:

1. Conduct all aspects of project engineering activities include attendance to technical meeting and discussion with client, and occasional overseas travel to support our regional market.

2. Comprehend and produce mechanical design and shop drawings.

3. Design automated machine includes material handling, material feeding system, material pick and place system, jigs and fixtures. This role also involves steel structure design, process piping design, static equipment like tanks and vessel design.

4. Candidate with prior experiences shall design and build customized solutions, perform equipment integration and participate in the role of project management.

5. Candidate shall be exposed to project cost management, plan work schedule, supervise and control contractors to carry out their works accurately and timely in accordance to the contract drawings, specifications and approved QA/ QC checklists.

THE PERSON:

* Degree/ Diploma in Mechanical, Mechatronics Engineering or its equivalent.

* Work experience in related field of Solids Bulk Handling and Packaging Machines

* Fresh graduates are welcome to apply

* Possess good communication and facilitation skills.

* Valid Class 3 driving license in Singapore as added advantage.

* Hands-on, practical and independent person who is able to travel

JOB DUTIES:

Fu Yu Corporation Ltd is looking for an independent and high motivated Additive Manufacturing Engineer to join the Additive Manufacturing Team in Singapore.

Successful candidate is expected to contribute to research & development activities for new product development and production scale up of 3D printed products where he/she will be carrying out the following work scopes but not limited to:

• Design, prototype and validation of product designs
• Review functional and printability of 3D models based on necessary specifications and requirements for each project.
• Carry out operations on selected 3D printing machines for new product development which includes material printability, process optimization and post processing
• Identify new opportunities for adopting 3D printing technologies in existing manufacturing process.
• Documentation of work procedures and data according to ISO standards requirements
• Maintain and upkeep of AM lab according to HSE standards and is responsible for equipment scheduling and maintenance.

EXPERIENCE REQUIRED:

• Minimum diploma in Mechanical, Engineering, Industrial Design or any relevant discipline
• Exceptionally motivated with a strong desire to learn and grow in the additive manufacturing field
• Experience in additive manufacturing technologies
• Strong teamwork and ability to manage cross-functional and divisional relationships
• Knowledge in Product Design & Development will be advantageous
• Familiar with CAD (computer aided design) software will be advantageous
• Experience with machining manufacturing environment will be advantageous
• Fresh graduates are welcomed to apply!

Job Description

• Production management in assembly factory for industrial wastewater treatment unit

• Supervise the overall assembly line and monitor the production progress

• Understanding the inventory situation, procurement of parts

• Coordination with parts warehouser and shipment forwarder

• Quality control

• Tools and equipment management

• Continuous improvement of production processes

Job Requirements

• At least 3 years of work experience in assembly factory

• Practical experience in Kaizen activity

• High communication ability for internal team and customer

• Good in spoken and written English

• Business attitude to provide reports, to keep the lines of communication open, and to ask for guidance or advice.

• Leadership skills

• Proficient in Microsoft office and IT

• Knowledge of Toyota production system will be an added advantage.

• Electrical knowledge of control panel / programmable logical controller

• If found suitable, the candidate may be eligible for supervisory roles

Our client is a statutory board under Government of Singapore, they are now looking for Software Engineer (Devices) to support the team.

The activities required to be performed shall include the following:

• Requirements gathering.

• Design and develop software applications for embedded devices.

• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.

• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.

• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.

• Assist day-to-day application support issues.

• Liaise with users on the requirement testing and production issues.

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.

• Developed software in at least one full Software Development Lifecycle.

• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling.

• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).

• Experience in Automatic Fare Collection (AFC) system.

• Experience in multi-threading, socket programming and serial/USB communication.

• At least 5 years’ experience in object-oriented software development

• Prior experience in following areas Scrum AGILE methodology process is a plus.

• Scrum AGILE methodology process

• Strong analytical and problem-solving skills

• Good written and verbal communication skills

• Self-motivated, independent and a good team player

Job Responsibilities:

• Attend to sales enquiries, quotations and responding to customer enquiries.
• Manage RFQ, review quote package, generate accurate and detailed quote summary for review.
• Liaise with purchasers on cost involving on the sales enquiries or quotations.
• Follow up with customers regarding quotations.
• Collaborate with internal resources to identify the make/buy logic for the bill of materials.
• Apply work knowledge to improve quote formats and output efficiency.
• Others ad-hoc duties may be assigned.

Requirements:

• Nitec/Higher Nitec or Diploma in Mechanical/Precision Engineering.
• Proficient in Microsoft Excel.
• Familiarity or experience on CNC machining or precision engineering environment preferred.
• Well verse in Microsoft Office.
• Able to interpret mechanical/technical drawings, bill of materials, specifications and Geometric dimensioning and tolerancing (GD&T).
• Familiar with CNC metal machining process like turning and milling etc.
• Pleasant personality and able to communicate well with customers for their request.
• Meticulous, excellent with details.
• Knowledge of SAP is an advantage.

• Responsible for the defect management of the sorting system to ensure timely discovery, data entry and various defects
• Daily checking the operation status of the sorting system equipment from time to time
• Responsible for the inspections and monitoring of mechanical sorting and maintenance
• Issue work permit and work arrangement for worker
• Others duties as assign by management

Job Requirements

• A team player
• Independent and possess sound analytical and communication skills
• 2 Years of relevant experience
• Diploma and above
• Experience in Power Plant industry is an advantage
• Working Location: Tuas South Avenue 2

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Info:

• Salary: Basic from $3500 - $4500 +VB
• Working Hour: Monday - Frida y (8:30am - 6pm)
• Location: Clementin MRT (Company transport provide one way)

Job Scope:

1. Business Analysis

• Understand business requirements or problem statements to develop business applications to drive value
• Liaise with end-users to identify any efficiencies, bottlenecks, and areas for workflow and work process improvements
• Translate end-user's adhoc business requests into technical requirements

2. Microsoft 365 Apps Implementation

• Provide expertise and guidance to end-users on the potential use of Microsoft 365 apps to improve work efficiency
• Convert manual processes/workflows to automation by designing and developing applications using the Microsoft Power Platform, including Power Apps, MS Flows/Power Automate, Power BI, etc.
• Communicate and work with multiple stakeholders and vendors to plan schedules for development and implementation of business applications
• Perform end-to-end testing, troubleshooting and end-user support
• Maintain and update applications developed as well as create and maintain documentation in the form of user guides for knowledge retention
• Conduct technical trainings and support for improvement of staff's skills in Microsoft 365 tools and other systems

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

RESPONSIBILITIES

• Perform the designs using in-house adsorption tools.
• Prepare the simulation files for SRU/TGU catalyst using Hysys.
• Prepare the simulation files for HPC using in-house tool.
• Prepare the technical proposal to meet the customers’ RFQ requirements.
• Provide on-site service for catalyst and adsorbent loading and start-up
• Support business manager on technical inquires.
• Resolve technical issues quickly and effectively at customer site or remotely.
• Develop technical services plan and execute the plan to meet customer expectation and demand.
• Carry out on-site excellent technical services and adhere to best practices standard.
• Prepare the Technical Service Visit Report
• Prepare various technical reports and presentations (internal and customer) and assures consistent communications.
• Work with other functions to develop value-added services relative to technical services

REQUIREMENTS

• Bachelor’s Degree in chemical engineering or Chemistry
• Minimum 3 years of experience in related industrials e.g. Oil refining and Petrochemical
• Comprehensive knowledge of Chemical Engineering
• Comprehensive knowledge of refining and petrochemical plant
• In-depth Microsoft Excel and Power Point skills

Application Engineer requires the ability to support the Commercial Team, both technically and commercially. It also requires involvement in cross departmental teams at new order handover meetings and other projects. It requires a proactive approach to maintaining and developing the companies’ working tools and practices.

• Provide technical solutions in order to bid and be able to detail design mixers, this would involve calculating and sizing process equipment (such as Static Mixers, Agitators, High Shear Mixers, Pumps)
• Present technical solutions to clients and other industry professionals
• Create and develop proposal and enquiry documents, detail design and specify for purposes of quotation, purchase and manufacture
• Request and evaluate sub-vendors proposals and required to reply to bid clarifications
• Attend and participate in client meetings, bid clarification meetings, technical discussions, project kick-off meetings and provide process inputs to ensure customer care is foremost
• Be fully familiar and conversant with department and company policies, procedures and processes, ensuring all work and actions undertaken are in full compliance at all times
• Support other departments and carry out other duties as and when business requirements dictate or as may be reasonably expected by the line manager

Responsibilities

· Prepares the schedule and oversee the T&I activities as per project specifications and procedures.

· Manages the subordinates’ staff in the day-to-day activities and that project goals are met as per budget.

· Coordinates with several departments related to T&I of project.

· Supervises the performance of his team and should respond to the issues during T&I.

· Attends the Project meetings and update the status.

· Liaises and review with T&I companies’ regarding transportation and

· Installation process, approach and time-lines to de-risk changes to schedule.

· Develops and drive the logistics concepts for project from conception to completion.

Requirements

· Minimum Degree in Engineering or equivalent.

· At least 7 ~ 10 years of relevant experience

· Ability to work independently in a team environment and possess good planning, organizational, interpersonal skills.

· Good experience in EPC projects for oil and gas , offshore renewables & system

Our Address and Working Hours:

Seatrium Limited

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

NDT engineer in conventional & advanced NDT – Hands-on practical testing in UT, RT, MT, PT, ET, PAUT & TOFD, Conducting Training for Level 1 & Level 2 courses, Consulting Solutions in NDT Applications in various industry.

We are looking for a self-initiative hardworking person to work with us as a NDT engineer based in Singapore. Our projects sites are in offshore and onshore in Asia (Singapore, Malaysia, Indonesia, Thailand, Bangladesh & India) & Middle East (Saudi Arabia, UAE, Oman, & Qatar) regions. Work regions are not limited to countries mentioned but based on opportunities and vision of company’s business development. Hence, the person we choose shall agree to travel around these regions.

As much of the work will be at sites, we are looking for hands-on practically oriented person with dynamic qualities who can handle site pressure and exigencies. The job involves, testing (Conventional & Advanced NDT) of pressure vessels, pipelines, structures, and other products etc. The job also requires you to conduct training course in conventional and advanced NDT as deployed by operations in-charge.

We are looking for someone who is motivated and leads by example and is willing to drive sales through proactiveness and hard work. We always believe in rewarding results.

Job Description

• Sales Generation: Contribute to the team revenue in all aspects of the sales process, including lead generation, customer inquiries, order processing, and post-sales support.
• Customer Relationship Management: Maintain strong relationships with existing and potential customers by providing prompt and accurate information, addressing queries and concerns, and ensuring customer satisfaction.
• Proposal and Quotation Preparation: create sales proposals and quotations, ensuring accuracy, and timely delivery to customers.
• Market Research: Conduct research on market trends, competitors, and customer needs to identify potential sales opportunities and develop effective sales strategies.
• Trade Shows and Events: Assist in the planning, coordination, and execution of trade shows, industry events, and customer demonstrations to promote products and services.
• Administrative Tasks: Perform various administrative tasks, including maintaining sales records, preparing sales documentation, managing calendars, and coordinating meetings and appointments.

Education & Skills Requirements

• Diploma or Certifications in relevant fields is accepted.
• Experience: Previous experience in the marine or similar industry is useful.
• Industry Technical Knowledge: Understanding of the marine or similar industry, including knowledge of similar products, services, market trends, and customer needs is useful.
• Communication Skills: Good verbal and written communication skills, with the ability to effectively interact with customers, colleagues, and stakeholders at all levels.
• Organization and Attention to Detail: Good organizational skills, attention to detail, and the ability to multitask in a fast-paced environment.
• Problem-Solving Abilities: Good analytical and problem-solving skills to identify and address customer issues and sales challenges effectively.
• Team Player: Ability to work collaboratively with cross-functional teams and contribute to a positive and cooperative work environment.
• Adaptability: Flexibility to adapt to changing priorities and handle multiple tasks with tight deadlines.
• Professionalism: Demonstrated professionalism, integrity, and a customer-focused approach in all interactions.

Interested candidates, do send your resume to [email protected]. Shortlisted candidates will be notified through email for an interview.

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams in the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree in relevant discipline.
• Minimum 5 years of experience in procurement preferably construction/ civil engineering industry.
• Must be familiar with safety procedure within the site.
• Have experiences in working in large scale projects.
• Candidate with LTA experience advantage.
• Willing to be based in site.

• Assisting Department Manager on day-to-day operations and to be a good role model setting good example including managing and supervision his subordinates with positive attitude towards work, customers, company and profitability of the job at all times.
• Execution of his daily duties including planning of work-scope, personnel allocation; assess tool requirement, scheduling, assessment, execution of repair and service works on diesel engine and auxiliary equipment components of two/four stroke engines. Monitor progress and ensure works are carried out on time and budget to correct quality levels.
• Track and update work progress and delivery schedules for recon. components.
• Evaluate safe and efficient work procedures to recommend modified or new tooling or process
• Assist with the compilation and production of service reports, calibration reports, draft invoices and work specifications etc., including ISO work instructions, risk assessment and checklist for all works.
• Liaise with customers and class, agents and other involved parties as well as other Goltens departments, QC, Sales staff etc. during repair projects including techno - commercial aspects with sub - contractors and vendors on outsourced reconditioning and repair works.
• Provide on-the job training to assigned personnel, monitor to verify skill levels and actively participate in the development of Goltens personnel to improve the quality of work.
• Ability to involve in the counseling process as part of the discipline action in the case of violation of rules of your subordinates.
• Have self-discipline, ownership and be responsible in maintaining the workshop, plant equipment, tools in good order and ensure good housekeeping in all job locations are well upkeep at all times.
• Always be proactive, cultivate good and safe working practices at all times to your subordinates and others at all times.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Review and advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents
• Prepare & Review HVAC calculation, specification and vendor's drawing
• Prepare & Review HVAC 2D SLD/DLD design & submission.
• Prepare & Review HVAC 3D model and production & site related drawings/supports.

Job Requirements

• Minimum 5 years of relevant work experience in the Machinery / HVAC newbuilding design in the Marine/ Offshore industry.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Job Description

1. Program the suitable Software/Application process
2. Design support for the applicable software/application process.
3. Preparing a proposal for such project related to development.
4. Maintenance management of those software/applications being used in USP.
5. Communicating to USP process owners the progress of work related to software/application development.
6. Communicate with UMT/NOK-IT about the on-going projects of USP related to IIOT or other software/applications.

Educational Qualifications

1. IT/IIOT/AUTOMATION/Engineering Diploma or Degree or equivalent background

Relevant Experience

1. Minimum 1-3 years’ experience

Competency

1. ·Knowledgeable in developing the software/application e.g., O365, RPA & etc.
2. Knowledgeable of any programming tools such as Python, RPA, Power BI, Power automate & etc.
3. Knowledgeable of other technology applications such as Cloud computing, Automation, ERP system & etc.
4. Knows the Current Trend of Technology especially when it comes to new software/applications.
5. Basic Knowledge of IIOT Technology

Personal Characteristic and Behavious

1. Must be meticulous.
2. Must be a team player.
3. Can handle any ad-hoc jobs especially from end-users.
4. Must be a self-driven person.
5. Well oriented person