About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Manage and coordinate all operational aspect of project including manpower planning, construction progress monitoring, preparation of schedule and cost control
• Provide timely updates to site management regarding project progress and schedule
• Liaise closely with clients, consultants, sub-contractors and relevant authorities to resolve site and compliance issues
• Coordinate and manage project quality assurance and control, and inspection services
• Attend all required project meetings with stakeholders, including necessary follow-ups and ensuring that project goals and objectives are met
• Resolve drawing discrepancies and technical issues with technical team
• Any other duties to be assigned from time to time

Pre-requisites

• Degree in Mechanical Engineering from a reputable university
• Minimum 10 years working experience and 3 years in a similar role
• Experience with power plant construction
• Able to communicate effectively at all levels with internal and external stakeholders
• Strong commitment to safety

Project location: Jurong Island (Transport will be provided at designated pick-up points)

Job Description:

· Must be able to perform troubleshooting on various electrical circuitry

· Engine and hydraulic knowledge with 2 years working experience in automobile industry (Electrical & Mechatronics) will be an advantage

· Assist Service Manager to manage the service department

· Able to lead a team of technicians and engineers to provide excellent service support

· A team player with positive working attitude and problem solving initiatives

Requirements:

· Minimum Diploma in electrical and electronic or mechatronics engineering

· Customer-focused and service-oriented

· Possess strong leadership, communication and interpersonal skills

· Proficient in written and spoken English

· Possess a valid qualified driving license Familiar with Microsoft Office and email

If you are the person we are looking for, please send a detailed resume with a recent photograph, indicating current and expected salary to us. We regret that only short-listed candidates will be notified.

Pre-requisites:

· Min. Education Level: Diploma

· Field of Study : Electrical Engineering / Mechatronics Engineering

· Skills : Good Technical Knowledge / Communication Skill / People management skills

· Language: English

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments.

Join our Cybersecurity team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Collaboration is key to our success. We prioritize open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

This role involves testing Cybersecurity products that are being developed using existing testing tools or creating their own automated scripts to demonstrate that the products they assess operate properly and are ready for production or distribution.

They will run tests to gather relevant information about how the product performs and use these test data to determine if there are issues that need to be addressed prior to end-user access. They will collaborate with product development team to discuss test results and develop solutions to the issues identified.

Key Responsibilities

• Responsible for product system integration and testing, and production support of Cybersecurity products
• Meeting with the software/product designers to determine quality assurance parameters.
• Designing QA test procedures.
• Overseeing the drafting of testing documents.
• Implementing testing procedures and overseeing the QA process.
• Troubleshooting quality issues and modifying test procedures.
• Conducting analysis checks on product specifications.
• Reviewing Quality Assurance reports.
• Ensuring the successful deployment of products into the market.
• Responding to requests from the design team and management.
• For manager role, responsibility includes creating a strategy for testing specific products and lead a team of system test engineers

Requirements:

• Previous experience as a QA/Testing engineer is preferred.
• Experience in software scripting on Windows and Linux systems
• Knowledge in network is an added advantage
• Knowledge in information security and standards is an added advantage
• Managerial experience preferred
• High-level analytical skills
• Advanced written and verbal communication skills
• Critical thinker
• Ability to project manage
• Proficient in MS Office software
• Detail oriented
• Entry level with good academic results are welcome to apply (product-specific and on-the-job trainings will be provided)
• Work location: Jurong East
• Singaporeans only

If you possess relevant experience, do apply in confidence with your updated CV.

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments.

Join our Cybersecurity team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Collaboration is key to our success. We prioritize open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

The role:

You are a hands-on, meticulous individual who possess knowledge on programming skills and algorithm development.

You enjoy working closely with all the relevant stakeholders and translate the operational requirements into effective and efficient solutions. Work as a product development team to collectively manage the product development lifecycle from system design, development testing, and production.

• Support migration of on-premise architecture design for implementation and deployment on AWS, Azure, GCP and/or equivalent cloud platforms.
• Keep abreast with emerging technologies in Security, Encryption, Key Management and Cloud architecture and bring forth culture of novel innovations within the team.
• Adopt best practices, industry standards, design patterns, as well as creativity and experience to develop application architectures and solutions.
• Work with team members to create test plan, perform unit and integration test at factory as part of factory system acceptance.
• Participate in the project implementation and coordinate new installations, designs and migrations for security technology and solutions.
• Troubleshoot, diagnose, and resolve hardware, software, and other network and system problems remotely on the customer's site.
• Monitor compliance to applicable codes, best practices, security standards and specifications for the delivery of security technology and solutions.
• Cooperate and communicate effectively with project manager and coordinate with other project participants to deliver functional solutions and provide assistance and technical support.
• Create and maintain technical documentation for reference and reporting.

Requirements

• Programming skills/experience in C#/Java/NodeJS/Python is a must. Relevant experience in software development for Cloud / Cloud+Hybrid systems preferred.
• Familiarity with virtualisation and container technologies like Nutanix, VMWare, OpenStack, Docker and Kubernetes preferred.
• A team player with strong analytical/ problem solving and communication skills.
• Candidates with experience on Cloud, DevOps and relevant (ISC)² Information Security Certifications are preferred.
• Candidates are expected to have undergone two (2) full product development lifecycles. A series of Product-specific and on-the-job trainings will be provided.

Work location: near Jurong East MRT

If you possess relevant experience, do apply in confidence with your updated CV.

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Attend to sales enquiries, quotations and responding to customer enquiries.
• Manage RFQ, review quote package, generate accurate and detailed quote summary for review.
• Liaise with purchasers on cost involving on the sales enquiries or quotations.
• Follow up with customers regarding quotations.
• Collaborate with internal resources to identify the make/buy logic for the bill of materials.
• Apply work knowledge to improve quote formats and output efficiency.
• Others ad-hoc duties may be assigned.

Requirements:

• Nitec/Higher Nitec or Diploma in Mechanical/Precision Engineering.
• Proficient in Microsoft Excel.
• Familiarity or experience on CNC machining or precision engineering environment preferred.
• Well verse in Microsoft Office.
• Able to interpret mechanical/technical drawings, bill of materials, specifications and Geometric dimensioning and tolerancing (GD&T).
• Familiar with CNC metal machining process like turning and milling etc.
• Pleasant personality and able to communicate well with customers for their request.
• Meticulous, excellent with details.
• Knowledge of SAP is an advantage.

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Diploma or Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as a global technology, defence and engineering group, spanning across the aerospace, smart city, defence and public security segments.

ST Engineering Info-Security strives to strengthen the cyber resiliency of the IT and OT infrastructures against the cyber threats by developing our indigenous capabilities and deepening our cyber domain expertise. We offer cybersecurity products like encryptors, data diode, secure data exchange gateway, trusted workspace solutions, secure mobility devices, etc.

Join our team of highly motivated individuals in the engineering cutting edge solutions that unify both cybersecurity and productivity. As our Cyber Security Product Engineer, you will join a team of specialised engineers to deploy, configure and support our indigenous and robustness cybersecurity products.

Job Description

• Participate in the product and project implementation and coordinate new installations, designs and migrations for security technology and solutions.
• Understand customer’s requirements and transform to technical control & technical solution
• Install, configure and upgrade Cyber Security Products
• Troubleshooting, diagnosing and resolving hardware, software, and other network and system problems on the customer's site
• Liaise with vendors and internal team for resolution solutioning for problems encountered.
• Monitor compliance to applicable codes, best practices, security standards and specifications for the delivery of security technology and solutions.
• Work within established configuration and change management policies to ensure awareness, approval and success of changes made to the ICT infrastructure.
• Cooperate and communicate effectively with project manager and coordinate with other project participants to deliver functional solutions and provide assistance and technical support.
• Create and maintain technical documentation for reference and reporting.
• Create, oversee and test system integration and security requirements (e.g. system integration test plan, system security acceptance test plan).
• Review findings from vulnerability assessment and penetration testing.
• You will learn system and cyber security knowledge with the team.

Requirements

• Familiar with cyber security products and project implementation
• Basic knowledge of networking.
• Possess basic knowledge in Linux
• Soft skills – Problem Solving, Communication and Teamwork Skills
• Work location: Jurong East
• Singaporeans only

If you possess relevant experience, do apply in confidence with your updated CV.

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

To develop and maintain Warehouse Control System (WCS) application.

Development of REST API endpoints for interfacing with external and internal stakeholders

• Design and documentation of REST APIs
• Development of REST API interfaces
• Implementing REST API logic
• Database integrations for persisting REST API data
• Testing of REST APIs
• Development of internal APIs for interfacing with internal components
• Writing documentation for internal API interfaces
• Development of internal API interfaces
• Implementing internal API logic
• Testing of internal APIs

Assist with software deployment and testing in customer site.

• Supporting deployment of WCS system on customer’s premises
• Handling integrations with additional systems
• Deployment and testing of the system

DevOps related tasks

As part of the software development team, you will be working in areas like orchestration, fleet management, task execution and optimization and many more challenging and exciting features.

Requirements

- Minimum Bachelor's degree in computer science, computer engineering, information technology or equivalent practical experience.

- Software skills: Python, Docker,Git, REST API

- Highly motivated and creative, thinking "out of the box", team player, problem solver, good interpersonal and communication skills

Primary Purpose

Functions as a technical specialist in water / wastewater treatment process. Performs all aspects of conventional design engineering and analysis independently. Broadens knowledge and skill set in area of discipline. Knowledge in other disciplines and/or functional areas.

Roles & Responsibilities

• Detailed design of process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants, sludge treatment plants, desalination process, etc.
• Detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems.
• Preparation of Process Flow Diagrams and P&IDs.
• General Arrangement and equipment layout drawings.
• Preparation of process equipment specifications.
• Review and evaluation of vendor submissions.
• Coordination with other disciplines e.g. civil, structural, electrical, mechanical, building services, instrumentation & control designers and digital water specialists.
• Able to lead meetings, HAZOP, discussions with clients, contractors and vendors.
• Provide engineering support for bids & proposals.
• Prepare testing and commissioning plans
• Process Testing & Commissioning
• Keeping abreast with latest development in water treatment technology and suitably applies in the design

Candidate shall have minimum of 15 years’ experience in the process design of water / wastewater treatment (municipal and industrial) with the following attributes:

1. Degree in Chemical or Environmental Engineering.
2. Expertise in water / wastewater treatment process modeling and optimization (including biological treatment).
3. Proficient in BioWin/GPS-X/SUMO or other wastewater modelling software.
4. Possess knowledge of wastewater treatment processes such as Activated Sludge, SBR, MBR & MBBR/IFAS.
5. Experience in preparing PFDs/P&IDs and specifications for procurement of water and wastewater process equipment.
6. Proven ability to manage diverse and large scale water projects, prioritize tasks, effectively.
7. Utilize available resources and ensure timely completion of projects.
   Proficient in written and oral communication with good interpersonal skills.

Key Responsibilities:

• Perform testing of petroleum products, refinery intermediate, process and effluent water
• Conduct sampling and testing of gases and LPG streams
• Perform QC/QA work including calibration and maintenance of equipment
• Perform stock-taking and reordering of chemicals and consumables

Requirements:

• Diploma in Science & Technology / Engineering or NITEC in Chemical Process Technology / Chemical & Life Science

n The Contractor shall provide integrated managed network services that encompass Network Administration and Management Services.

n Network equipment shall consist of, but shall not be limited to, hardware, software and firmware of network switches, routers, firewalls, intrusion detection systems (IDS), intrusion prevention systems (IPS), virtual private network (VPN) gateway, content engines, proxy, wireless access points, wireless controllers, hardware load balancer, modems, IP PABX, Uninterruptible Power Supplies (UPS), and server hardware. The phase “network devices” shall be used interchangeably with “network equipment”

n Network infrastructure shall consist of, but shall not be limited to, client and the In-Scope Institutions’ LAN and WAN, wireless network (WLAN), extranet connections, peer-to-peer connections to external agencies, Internet connections and the Demilitarized Zone (DMZ). The network infrastructure shall encompass the network services components including but not limited to, Network Time Protocol (NTP), Domain Name Services (DNS), Active Directory, Dynamic Host Configuration Protocol (DHCP), remote access, VPN and Cisco Secure Access Control Server (ACS). The phase “data network” shall be used interchangeably with “network infrastructure”.

n The Contractor shall perform day-to-day network operation for the network infrastructure and network equipment and the In-Scope Institutions’ premises.

o The Contractor shall setup and operate an online network operation management portal as part of the Network Administration and Management Services for general access and the In-Scope Institutions’ end users at no additional cost to the client and/or the In-Scope Institutions. The information presented in the portal shall be up-to-date and shall include, but shall not be limited to, the following:

• (i) Network diagrams and equipment configuration such as IP addresses, firmware and software version for the network equipment in multiple levels, hierarchical details and categorized by respective In-Scope Institutions.
• (ii) Physical layout and location of the network equipment per each Site.
• (iii) Configuration change history of the network equipment.
• (iv) Cable plant inventory inclusive of labels and tags information.
• (v) UPS inventory inclusive of capacity, usage, support and maintenance details.
• (vi) Online job requests submission and job requests status.

(vii) Incident reports status and workflow for tracking of escalation and resolution

1. Design and Drafting:

- Use computer-aided design (CAD) software to create detailed engineering drawings and plans.

- Assist in the design process for various projects, such as buildings, machinery, or electronic systems.

2. Testing and Quality Control:

- Conduct experiments and tests to evaluate the performance and reliability of products or systems.

- Implement quality control procedures to ensure that products meet industry standards and specifications.

3. Technical Support:

- Provide technical support to engineers or other team members in the development and implementation of projects.

- Troubleshoot and solve technical problems that may arise during the design or manufacturing process.

4. Maintenance and Repair:

- Perform routine maintenance and repair of equipment or systems to ensure proper functionality.

- Diagnose and address issues with machinery or electronic systems.

5. Project Management:

- Assist in project management tasks, such as budgeting, scheduling, and coordinating activities to ensure project goals are met.

- Collaborate with cross-functional teams to achieve project objectives.

6. Installation and Commissioning:

- Participate in the installation and commissioning of new equipment or systems.

- Ensure that installations meet safety and performance standards.

7. Documentation:

- Prepare technical documentation, including manuals, reports, and specifications.

- Maintain accurate records of engineering activities and project progress.

8. Research and Development:

- Contribute to research and development efforts by staying updated on industry trends and incorporating new technologies into

Key accountability (Main purpose of this job):

Reporting to the Head of Technology, this role requires a good mix of technical and business-interfacing skills to scope, implement and manage a range of applications for internal and external customers. The key focus areas of this role will be platform governance, process automation and optimization, integration architecture and database administration.

Responsibilities (Key areas of Responsibilities):

● Oversee the technical evolution of our current IT infrastructure, which includes learning management system, student management system, customer-relationship management system and administrative systems.

● Interface with end-users to understand short and medium term needs.

● Develop software solutions by studying information needs; conferring with users; studying systems flow, data usage and work processes; investigating problem areas; and following the software development lifecycle.

● Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and proposed solutions.

● Develop optimal solution architectures to ensure technical compatibility and user satisfaction.

● Implement, configure and test feasible solutions.

● Support users on change control and system updates.

● Stay up-to-date with technical and industry developments and standards.

Requirements:

● Bachelor’s Degree in Information Systems, Computer Science, Computer Engineering or IT-related equivalent

● 5-8 years of software development or full-stack web development experience on integrating various SaSS or custom platforms (CRM, LMS, ERP etc) using API or web services

● Strong Hands-on experience with cloud integration platform (Workato, MuleSoft etc) and relational database (MS SQL, MySQL, Oracle, Mongodb, BigQuery etc)

● Hands-on with Programming Languages: HTML5, CSS, Java, PHP, Web Services, JavaScript/JQuery, Bootstrap, Python, typescript, Nodejs

● Strong analytical mindset and solution focused

● Demonstrated experience in effectively managing end-users

● Experience with Google Cloud, Ubuntu, especially Kubernetes, BigQuery, Looker and other data analytics services is a huge plus

● Prior experience working in the education sector and student information systems and LMS will be advantageous

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments.

Join our Cybersecurity team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Collaboration is key to our success. We prioritize open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Job Description

• We are looking for a hands-on and meticulous individual who possess knowledge on programming skills and algorithm development.
• Work closely with all the relevant stakeholders to translate the operational requirements into effective and efficient solutions.
• Work as a product development team to collectively manage the product development lifecycle from system design, development testing, and production.

Requirements

• Familiar to at least one of the programming language: .Net, Java, C or C++, C#
• Soft skills – Problem Solving, Communication and Teamwork Skills
• We welcome candidates with no experience but possess strong logical thinking to apply - product-specific and on-job trainings will be provided.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational down-time.

As a IT Support Engineer, you will be responsible for the following :-

• Assist the project teams with setting up, installing, and configuring operating systems, applications, and peripheral devices for PCs/Workstations.
• Provide first level on-site IT support to end-users on a 24x7 rotational shift, including weekends and holidays.
• The successful applicants should be prepared to be deployed primarily at Tuas Checkpoint. The successful applicant could be deployed to Tuas checkpoint in future on a rotational basis.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• Experience in installing, configuring, and troubleshooting PC/peripheral devices and providing application maintenance support is necessary.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), KPIs (key-performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

We are a Singaporean SME located in Jurong area, manufacturer and agent for Weighing and Weighing Related Equipment, Electronic Measurement & Control Devices, Powder Processing Equipment and Systems, and Packaging Equipment. The foundation of our continued success over the past 69 years is a dedicated and professional team that strives relentlessly to overcome all challenges.

You will be part of the Engineering team to perform machinery design, supervising and handling of fabrication with sub-fabricators and suppliers, machinery installation, test and commissioning.

THE ROLE:

1. Conduct all aspects of project engineering activities include attendance to technical meeting and discussion with client, and occasional overseas travel to support our regional market.

2. Comprehend and produce mechanical design and shop drawings.

3. Design automated machine includes material handling, material feeding system, material pick and place system, jigs and fixtures. This role also involves steel structure design, process piping design, static equipment like tanks and vessel design.

4. Candidate with prior experiences shall design and build customized solutions, perform equipment integration and participate in the role of project management.

5. Candidate shall be exposed to project cost management, plan work schedule, supervise and control contractors to carry out their works accurately and timely in accordance to the contract drawings, specifications and approved QA/ QC checklists.

THE PERSON:

* Degree/ Diploma in Mechanical, Mechatronics Engineering or its equivalent.

* Work experience in related field of Solids Bulk Handling and Packaging Machines

* Fresh graduates are welcome to apply

* Possess good communication and facilitation skills.

* Valid Class 3 driving license in Singapore as added advantage.

* Hands-on, practical and independent person who is able to travel

JOB DUTIES:

Fu Yu Corporation Ltd is looking for an independent and high motivated Additive Manufacturing Engineer to join the Additive Manufacturing Team in Singapore.

Successful candidate is expected to contribute to research & development activities for new product development and production scale up of 3D printed products where he/she will be carrying out the following work scopes but not limited to:

• Design, prototype and validation of product designs
• Review functional and printability of 3D models based on necessary specifications and requirements for each project.
• Carry out operations on selected 3D printing machines for new product development which includes material printability, process optimization and post processing
• Identify new opportunities for adopting 3D printing technologies in existing manufacturing process.
• Documentation of work procedures and data according to ISO standards requirements
• Maintain and upkeep of AM lab according to HSE standards and is responsible for equipment scheduling and maintenance.

EXPERIENCE REQUIRED:

• Minimum diploma in Mechanical, Engineering, Industrial Design or any relevant discipline
• Exceptionally motivated with a strong desire to learn and grow in the additive manufacturing field
• Experience in additive manufacturing technologies
• Strong teamwork and ability to manage cross-functional and divisional relationships
• Knowledge in Product Design & Development will be advantageous
• Familiar with CAD (computer aided design) software will be advantageous
• Experience with machining manufacturing environment will be advantageous
• Fresh graduates are welcomed to apply!

Job Description

• Production management in assembly factory for industrial wastewater treatment unit

• Supervise the overall assembly line and monitor the production progress

• Understanding the inventory situation, procurement of parts

• Coordination with parts warehouser and shipment forwarder

• Quality control

• Tools and equipment management

• Continuous improvement of production processes

Job Requirements

• At least 3 years of work experience in assembly factory

• Practical experience in Kaizen activity

• High communication ability for internal team and customer

• Good in spoken and written English

• Business attitude to provide reports, to keep the lines of communication open, and to ask for guidance or advice.

• Leadership skills

• Proficient in Microsoft office and IT

• Knowledge of Toyota production system will be an added advantage.

• Electrical knowledge of control panel / programmable logical controller

• If found suitable, the candidate may be eligible for supervisory roles

Job Responsibilities:

• Attend to sales enquiries, quotations and responding to customer enquiries.
• Manage RFQ, review quote package, generate accurate and detailed quote summary for review.
• Liaise with purchasers on cost involving on the sales enquiries or quotations.
• Follow up with customers regarding quotations.
• Collaborate with internal resources to identify the make/buy logic for the bill of materials.
• Apply work knowledge to improve quote formats and output efficiency.
• Others ad-hoc duties may be assigned.

Requirements:

• Nitec/Higher Nitec or Diploma in Mechanical/Precision Engineering.
• Proficient in Microsoft Excel.
• Familiarity or experience on CNC machining or precision engineering environment preferred.
• Well verse in Microsoft Office.
• Able to interpret mechanical/technical drawings, bill of materials, specifications and Geometric dimensioning and tolerancing (GD&T).
• Familiar with CNC metal machining process like turning and milling etc.
• Pleasant personality and able to communicate well with customers for their request.
• Meticulous, excellent with details.
• Knowledge of SAP is an advantage.

• Responsible for the defect management of the sorting system to ensure timely discovery, data entry and various defects
• Daily checking the operation status of the sorting system equipment from time to time
• Responsible for the inspections and monitoring of mechanical sorting and maintenance
• Issue work permit and work arrangement for worker
• Others duties as assign by management

Job Requirements

• A team player
• Independent and possess sound analytical and communication skills
• 2 Years of relevant experience
• Diploma and above
• Experience in Power Plant industry is an advantage
• Working Location: Tuas South Avenue 2

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Info:

• Salary: Basic from $3500 - $4500 +VB
• Working Hour: Monday - Frida y (8:30am - 6pm)
• Location: Clementin MRT (Company transport provide one way)

Job Scope:

1. Business Analysis

• Understand business requirements or problem statements to develop business applications to drive value
• Liaise with end-users to identify any efficiencies, bottlenecks, and areas for workflow and work process improvements
• Translate end-user's adhoc business requests into technical requirements

2. Microsoft 365 Apps Implementation

• Provide expertise and guidance to end-users on the potential use of Microsoft 365 apps to improve work efficiency
• Convert manual processes/workflows to automation by designing and developing applications using the Microsoft Power Platform, including Power Apps, MS Flows/Power Automate, Power BI, etc.
• Communicate and work with multiple stakeholders and vendors to plan schedules for development and implementation of business applications
• Perform end-to-end testing, troubleshooting and end-user support
• Maintain and update applications developed as well as create and maintain documentation in the form of user guides for knowledge retention
• Conduct technical trainings and support for improvement of staff's skills in Microsoft 365 tools and other systems

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

RESPONSIBILITIES

• Perform the designs using in-house adsorption tools.
• Prepare the simulation files for SRU/TGU catalyst using Hysys.
• Prepare the simulation files for HPC using in-house tool.
• Prepare the technical proposal to meet the customers’ RFQ requirements.
• Provide on-site service for catalyst and adsorbent loading and start-up
• Support business manager on technical inquires.
• Resolve technical issues quickly and effectively at customer site or remotely.
• Develop technical services plan and execute the plan to meet customer expectation and demand.
• Carry out on-site excellent technical services and adhere to best practices standard.
• Prepare the Technical Service Visit Report
• Prepare various technical reports and presentations (internal and customer) and assures consistent communications.
• Work with other functions to develop value-added services relative to technical services

REQUIREMENTS

• Bachelor’s Degree in chemical engineering or Chemistry
• Minimum 3 years of experience in related industrials e.g. Oil refining and Petrochemical
• Comprehensive knowledge of Chemical Engineering
• Comprehensive knowledge of refining and petrochemical plant
• In-depth Microsoft Excel and Power Point skills